source: git/lib/ro.po @ d86459c

msgid ""
msgstr ""
"Project-Id-Version: survex-1.1.16\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2011-05-17 01:20:59 +1200\n"
"Last-Translator: Olly Betts <olly@survex.com>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
#. allocate space for.
#. sk: Alternatively "Nedostatočná kapacita pamäte"
#: ../src/message.c:83
#, c-format
msgid "Out of memory (couldn't find %lu bytes)."
msgstr "Memorie insuficienta (nu am putut gasi %lu bytes)"

#. TRANSLATORS: de: Gerhard: (this replaces the idea of "greater" with "newer" because it
#. sounds more natural.  Feel free to write "höher" instead of "neuer", but
#. I would advise against it.)
#: ../src/commands.c:1502
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "Este necesara versiunea Survex %s sau superioara pentru procesarea acestor date"

#. TRANSLATORS: Used with message 5 like so:
#. In file included from area.svx:12,
#. from cave.svx:3:
#. passage.svx:17: <some error or warning>
#: ../src/datain.c:107
msgid "from"
msgstr "de la"

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#. fr: Francois had "Imprécision".  The official translation is
#. "Avertissement", which Eric favours even if it sounds somewhat formal.
#: ../src/aven.cc:351
#: ../src/message.c:1181
msgid "warning"
msgstr "avertisment"

#. TRANSLATORS: de: we really want the filename/line number at the end (so error parsing
#. editors can follow), so the natural translation:
#. "In von %s:%d: aus eingelesener Datei"
#. isn't ideal.  This is "clumsy but workable":
#: ../src/datain.c:103
msgid "In file included from"
msgstr "In fisierul inclus de"

#: ../src/commands.c:507
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix contine eroare - folositi in schimb *begin si *end"

#. TRANSLATORS: de: shorter, but not as good:
#. Unerlaubtes Zeichen `%c' in Meßpunktname (erlaubte Zeichen mit *SET NAMES definieren)
#: ../src/readval.c:121
#, c-format
msgid "Character `%c' not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "Folosirea caracterului `%c' in numele statiei, nu este permisa (folositi *SET NAMES pentru a modifica lista de caractere)"

#: ../src/readval.c:319
msgid "Field may not be omitted"
msgstr "Aceasta rubrica nu poate fi omisa"

#: ../src/datain.c:1436
#: ../src/datain.c:1447
#: ../src/datain.c:1708
#: ../src/readval.c:321
#: ../src/readval.c:362
#: ../src/readval.c:392
#, c-format
msgid "Expecting numeric field, found `%s'"
msgstr "Se asteapta camp numeric, s-a gasit `%s'"

#. TRANSLATORS: de: Gerhard: "`%s' gelesen" means "have read `%s'" - "gefunden", the literal
#. equivalent, doesn't sound quite right here
#. NB there is no comma before "oder"
#: ../src/commands.c:1410
#, c-format
msgid "Found `%s', expecting `PRESERVE', `TOUPPER', or `TOLOWER'"
msgstr "S-a gasit `%s', se astepta `PRESERVE', `TOUPPER' sau `TOLOWER'"

#: ../src/matrix.c:359
#: ../src/message.c:233
#: ../src/debug.h:45
#: ../src/debug.h:47
msgid "Bug in program detected! Please report this to the authors"
msgstr "Eroare de program! Va rugam anuntati autorii"

#. TRANSLATORS: de: Gerhard says "Kommando" and "Befehl" are equally valid translations - use
#. Befehl to be consistency.
#: ../src/commands.c:1614
#: ../src/extend.c:420
#, c-format
msgid "Unknown command `%s'"
msgstr "Comanda necunoscuta `%s'"

#: ../src/netbits.c:407
#, c-format
msgid "Station `%s' equated to itself"
msgstr "Statia `%s' este egala cu ea insasi"

#: ../src/datain.c:970
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "Valoarea azimutului poate fi omisa doar in cazul vizelor verticale"

#: ../src/datain.c:236
#: ../src/extend.c:425
msgid "End of line not blank"
msgstr "Sfarsitul liniei nu este gol"

#. TRANSLATORS: de: Es wurden %d Warnungen registriert.
#: ../src/cavern.c:374
#, c-format
msgid "There were %d warning(s)."
msgstr "Au fost %d avertismente."

#. TRANSLATORS: pipe here means a Unix pipe, which transfers data between two programs
#. -- probably best not to translate it
#: ../src/cavernlog.cc:210
#, c-format
msgid "Couldn't open pipe: `%s'"
msgstr "Nu s-a putut deschide `pipe': `%s'"

#: ../src/datain.c:80
#: ../src/datain.c:88
#: ../src/datain.c:95
#: ../src/datain.c:723
#: ../src/extend.c:544
#: ../src/sorterr.c:75
#: ../src/sorterr.c:92
#: ../src/sorterr.c:234
msgid "Error reading file"
msgstr "Eroare in citirea fisierului"

#. TRANSLATORS: anthropomorphising version: de: 19 Zu viele Fehler - ich gebe auf
#: ../src/message.c:1196
msgid "Too many errors - giving up"
msgstr "Prea multe erori - proces intrerupt"

#: ../src/commands.c:1291
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "*DEFAULT nu mai este folosit - folositi in schimb *CALIBRATE/DATA/SD/UNITS cu argumentul DEFAULT"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
#. So the problem here is that the leg is vertical, so a compass reading has
#. no meaning!
#: ../src/datain.c:943
msgid "Compass reading given on plumbed leg"
msgstr "Citire a busolei la o masuratoare verticala"

#: ../src/commands.c:569
msgid "END with no matching BEGIN in this file"
msgstr "END nu are un corespondent BEGIN in acest fisier"

#: ../src/datain.c:710
msgid "BEGIN with no matching END in this file"
msgstr "BEGIN nu are un corespondent END in acest fisier"

#: ../src/printwx.cc:1166
#: ../src/datain.c:352
#: ../src/img.c:176
#, c-format
msgid "Couldn't open data file `%s'"
msgstr "Nu am reusit deschiderea fisierului de date `%s'"

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is deprecated, so this error
#. would be generated by:
#. *equate \foo.7 1
#: ../src/commands.c:416
#: ../src/readval.c:62
#: ../src/readval.c:66
msgid "ROOT is deprecated"
msgstr "ROOT nu se recomanda"

#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
#. "Station `\outer.inner.1' not exported from survey `\outer')":
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#: ../src/commands.c:813
#: ../src/listpos.c:130
#: ../src/readval.c:240
#, c-format
msgid "Station `%s' not exported from survey `%s'"
msgstr "Punctul de statie `%s' nu a fost exportat din masuratoarea `%s'"

#: ../src/readval.c:212
#, c-format
msgid "`%s' can't be both a station and a survey"
msgstr "`%s' nu poate fi acelasi timp punct de statie si denumire de masuratoare"

#: ../src/extend.c:247
#: ../src/extend.c:262
#: ../src/extend.c:302
#: ../src/extend.c:342
#: ../src/extend.c:382
#: ../src/readval.c:118
msgid "Expecting station name"
msgstr "Lipseste numele punctului de statie"

#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
#. de: deprecated is a wonderful English word lacking a wonderful German
#. equivalent....  errm and do we have a translation for "prefix level"
#. yet?  (rummaging in old mail folders)  apparently not.  Ok.  Would
#. "to introduce a prefix" be a rough equivalent for "to enter a prefix
#. level"?
#: ../src/commands.c:479
msgid "Reentering an existing prefix level is deprecated"
msgstr "Reintroducerea unui prefix deja existent nu este recomandata"

#: ../src/commands.c:486
msgid "Originally entered here"
msgstr "Introdus aici in original"

#: ../src/commands.c:1439
#, c-format
msgid "Found `%s', expecting `EQUATES', `EXPORTS', or `PLUMBS'"
msgstr "S-a gasit `%s' in loc de `EQUATES', `EXPORTS', sau `PLUMBS'"

#: ../src/commands.c:1445
#, c-format
msgid "Found `%s', expecting `ON' or `OFF'"
msgstr "S-a gasit `%s' in loc de `ON' sau `OFF'"

#. TRANSLATORS: EQUATE is a command name, so shouldn't be translated.  I've attempted to
#. update de, but my language skills aren't great...
#: ../src/commands.c:786
msgid "Only one station in EQUATE command"
msgstr "Doar un punct de statie in comanda EQUATE"

#: ../src/commands.c:372
#, c-format
msgid "Unknown quantity `%s'"
msgstr "Cantitate necunoscuta `%s'"

#: ../src/commands.c:298
#, c-format
msgid "Unknown units `%s'"
msgstr "Unitati necunoscute `%s'"

#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:586
msgid "Matching BEGIN tag has no prefix"
msgstr "BEGIN nu are nici un prefix corespondent"

#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
#. the correct term in other languages may be singular.
#. de: This is assuming there is _no_ subsequent message naming the culprit
#. quantity.  If there is, make it `die Größe', and append its
#. name immediately.
#: ../src/commands.c:307
#, c-format
msgid "Invalid units `%s' for quantity"
msgstr "Unitate incorecta `%s' pentru cantitate"

#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
#. a filename parameter - we don't really want it here, so lose it with "%.0s"
#. (which should display 0 characters from the filename) FIXME: sort out this
#: ../src/img.c:177
msgid "Out of memory %.0s"
msgstr "Memorie insuficienta %.0s"

#: ../src/commands.c:366
#, c-format
msgid "Unknown instrument `%s'"
msgstr "Instrument necunoscut `%s'"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
#: ../src/commands.c:1267
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "Raportul scarii trebuie sa fie 1.0 pentru DECLINATION"

#: ../src/commands.c:1309
#, c-format
msgid "Unknown setting `%s'"
msgstr "Parametru necunoscut `%s'"

#: ../src/commands.c:409
#, c-format
msgid "Unknown character class `%s'"
msgstr "Clasa de caractere necunoscuta `%s'"

#: ../src/extend.c:590
#: ../src/netskel.c:89
msgid "No survey data"
msgstr "Lipsesc masuratorile topografice"

#. TRANSLATORS: de: sounds ugly, but is correct, and I can't think of a replacement
#: ../src/filename.c:52
#: ../src/img.c:178
#, c-format
msgid "Filename `%s' refers to directory"
msgstr "Fisierul `%s' este un director"

#: ../src/netartic.c:374
msgid "Survey not all connected to fixed stations"
msgstr "Topografia nu este complet conectata la puncte fixate"

#: ../src/commands.c:725
#: ../src/datain.c:633
msgid "Station already fixed or equated to a fixed point"
msgstr "Punct de statie deja fixat sau echivalat cu un punct fix"

#: ../src/cavern.c:277
#: ../src/filename.c:55
#: ../src/img.c:179
#, c-format
msgid "Failed to open output file `%s'"
msgstr "Nu este posibila deschiderea fisierului `%s'"

#: ../src/commands.c:1364
msgid "Standard deviation must be positive"
msgstr "Deviatia standard trebuie sa fie pozitiva"

#. TRANSLATORS: as in: Usage: cavern ...
#: ../src/cmdline.c:147
msgid "Usage"
msgstr "Folosire"

#. TRANSLATORS: %s is a placeholder for the name of the station
#: ../src/netbits.c:335
#, c-format
msgid "Survey leg with same station (`%s') at both ends - typing error?"
msgstr "Masuratoare cu acelasi punct (`%s') la ambele capete - eroare de transcriere?"

#. TRANSLATORS: de: `Grad' *is* `degree'.  The decimal grades are called `Neugrad'
#. when necessary to avoid confusion.  While surface surveyors here use
#. these per default, cavers rarely do.
#. pt: "graus" is correct here ("grad" would be "grados")
#. ca: Eric queries if "graus" is correct here:
#. es: Eric queries if "grados" is correct here:
#. it: "gradi" is correct here (grads would be "gradi quattrocentesimali")
#: ../src/datain.c:901
#: ../src/datain.c:916
msgid "Clino reading over 90 degrees (absolute value)"
msgstr "Valoare a clinometrului peste 90 grade (valoare absoluta)"

#: ../src/netbits.c:422
#, c-format
msgid "Tried to equate two non-equal fixed stations: `%s' and `%s'"
msgstr "Tentativa de egalizare a doua puncte de statie fixe diferite: `%s' si `%s'"

#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
#: ../src/netbits.c:428
#, c-format
msgid "Equating two equal fixed points: `%s' and `%s'"
msgstr "Egalizare a doua puncte de statie identice `%s' si `%s'"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:643
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "Comanda FIX fara coordonate - se atribuie (0,0,0)"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:728
#: ../src/datain.c:635
msgid "Station already fixed at the same coordinates"
msgstr "Punct de statie deja fixat cu aceleasi coordonate"

#: ../src/commands.c:636
msgid "More than one FIX command with no coordinates"
msgstr "Mai mult de o comanda FIX fara coordonate"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
#. would generate error 57:
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:1621
msgid "*EXPORT must immediately follow `*BEGIN <SURVEY>'"
msgstr "*EXPORT trebuie sa urmeze dupa `*BEGIN <TOPOGRAFIE>'"

#: ../src/readval.c:448
msgid "Invalid year (< 1900 or > 2078)"
msgstr "An gresit (< 1900 or > 2078)"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
#: ../src/datain.c:818
#: ../src/datain.c:827
msgid "Suspicious compass reading"
msgstr "Azimut suspect"

#: ../src/datain.c:1414
msgid "Negative tape reading"
msgstr "Distanta negativa"

#: ../src/commands.c:638
msgid "Same station fixed twice with no coordinates"
msgstr "Acelasi punct de statie fixat de doua ori fara coordonate"

#. TRANSLATORS: This means that the data fed in said this.
#. It could be a gross error (e.g. the decimal point is missing from
#. the depth gauge reading) or it could just be due to random error on
#. a near vertical leg
#. de: Note that a change in depth becomes a `change in height' in German
#: ../src/datain.c:1117
msgid "Tape reading is less than change in depth"
msgstr "Distanta este mai mica decat difeneta de nivel"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. neither style nor reading is a keyword in the program
#. This error complains about a depth gauge reading in normal style, for example
#: ../src/commands.c:1018
#, c-format
msgid "Reading `%s' not allowed in data style `%s'"
msgstr "Datele `%s' nu sunt permise in campul de date `%s'"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1181
#, c-format
msgid "Too few readings for data style `%s'"
msgstr "Lipsesc date pentru campul de date `%s'"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#. it: The meaning of scorretto is that the STYLE is written wrong but is similar
#. to a known style.
#. STYLE `%s' scorretto
#: ../src/commands.c:985
#, c-format
msgid "Data style `%s' unknown"
msgstr "Tipul de date `%s' necunoscut"

#. TRANSLATORS: Exporting a station twice give error 66:
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:857
#, c-format
msgid "Station `%s' already exported"
msgstr "Punctul de statie `%s' este deja exportat"

#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
#. de: The reservations with respect to "quantity"  (a close equivalent
#. to "Meßgröße")  apply to the German term as well --
#. a from station of a leg isn't a "Meßgröße" either
#. by any stretch of the imagination.
#: ../src/commands.c:1036
#, c-format
msgid "Duplicate reading `%s'"
msgstr "Campul `%s' duplicat"

#: ../src/commands.c:754
#, c-format
msgid "FLAG `%s' unknown"
msgstr "FLAG `%s' necunoscut"

#: ../src/readval.c:406
msgid "Missing \""
msgstr "Lipseste \""

#. TRANSLATORS: ro: FIXME i didn't get the idea of this message. i did an "automatic" translation
#: ../src/listpos.c:105
#, fuzzy, c-format
msgid "Station `%s' referred to just once, with an explicit prefix - typo?"
msgstr "Punctul de statie `%s' are o referinta unica, cu un prefix explicit - eroare de scriere?"

#: ../src/netartic.c:379
msgid "The following survey stations are not attached to a fixed point:"
msgstr "Urmatoarele puncte de statie nu sunt atasate unui punct fixat"

#: ../src/netskel.c:128
#, c-format
msgid "Survey has no fixed points. Therefore I've fixed %s at (0,0,0)"
msgstr "Topografia nu contine puncte fixate. Am fixat %s ca (0,0,0)"

#. TRANSLATORS: fixed station that is not part of any traverse
#: ../src/netskel.c:896
#, c-format
msgid "Unused fixed point `%s'"
msgstr "Punct fix nefolosit `%s'"

#: ../src/matrix.c:123
msgid "Network solved by reduction - no simultaneous equations to solve."
msgstr "Retea rezolvata prin reducere - nici un sistem de ecuatii de rezolvat."

#: ../src/matrix.c:135
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "Rezolv %d ecuatii simultane"

#. TRANSLATORS: %c is 'x', 'y' or 'z'
#: ../src/matrix.c:150
#, c-format
msgid "Solving to find %c coordinates"
msgstr "Incerc sa gasesc coordonatele %c"

#. TRANSLATORS: de has the reverse singular/plural arrangement :)
#. (i.e., singular has the final -n, plural doesn't)
#: ../src/commands.c:1090
#, c-format
msgid "Reading `%s' duplicates previous reading(s)"
msgstr "Valoarea `%s' dubleaza campul/campurile precedent/e"

#: ../src/matrix.c:133
msgid "Solving one equation"
msgstr "Rezolv o ecuatie"

#: ../src/datain.c:889
#: ../src/datain.c:1111
#: ../src/datain.c:1300
msgid "Negative adjusted tape reading"
msgstr "Distanta corectata negativ"

#: ../src/commands.c:1539
#: ../src/commands.c:1559
msgid "Date is in the future!"
msgstr "Data se gaseste in viitor!"

#: ../src/commands.c:1563
msgid "End of date range is before the start"
msgstr "Data finala este anterioara datei de inceput"

#: ../src/avenprcore.cc:118
#, c-format
msgid "Parameter `%s' has invalid value `%s' in printer configuration file"
msgstr "Parametrul `%s' are valoarea incorecta `%s' in fisierul de configurare a imprimantei"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
#. there is no station "entrance.27" in the centre-line.
#: ../src/netskel.c:980
#, c-format
msgid "Cross section specified at non-existent station `%s'"
msgstr ""

#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
#. foresight and a clino reading for the backsight, or something similar.
#: ../src/datain.c:930
#: ../src/datain.c:951
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "Citirile CLINO si BACKCLINO trebuie sa fie de acelasi tip."

#: ../src/avenprcore.cc:113
#, c-format
msgid "Parameter `%s' missing in printer configuration file"
msgstr "Parametrul `%s' lipseste din fisierul de configurare a imprimantei"

#: ../src/readval.c:456
msgid "Invalid month"
msgstr "Luna incorecta"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/readval.c:464
msgid "Invalid day of the month"
msgstr "Zi incorecta"

#, c-format
msgid "Error in format of font file `%s'"
msgstr "Eroare in formatul fisireului de font `%s'"

#: ../src/readval.c:116
msgid "Expecting survey name"
msgstr "Se asteapta o denumire de topografie"

#. TRANSLATORS: Program will exit shortly after printing this
#: ../src/message.c:224
msgid "Abnormal termination"
msgstr "Final anormal"

#: ../src/message.c:225
msgid "Arithmetic error"
msgstr "Eroare aritmetica"

#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
#: ../src/message.c:226
msgid "Illegal instruction"
msgstr "Instructiune ilegala"

#: ../src/mainfrm.cc:364
#: ../src/extend.c:539
#: ../src/sorterr.c:140
#, c-format
msgid "Couldn't open file `%s'"
msgstr "Nu am putut deschide fisierul `%s'"

#: ../src/message.c:227
msgid "Bad memory access"
msgstr "Acces la memorie eronat"

#. TRANSLATORS: ro: FIXME pls give me a synonym for "deprecated"
#: ../src/commands.c:418
#: ../src/commands.c:481
#: ../src/commands.c:509
#: ../src/commands.c:999
#: ../src/commands.c:1293
#: ../src/readval.c:68
#, fuzzy
msgid "Further uses of this deprecated feature will not be reported"
msgstr "Folosirea ulterioara a acestei functionalitati ??? nu va fi semnalata"

#: ../src/message.c:228
msgid "Unknown signal received"
msgstr "Semnal necunoscut receptionat"

#: ../src/datain.c:855
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
msgstr "Lectura COMPASS si BACKCOMPASS nu concorda cu %s grade"

#: ../src/datain.c:999
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
msgstr "Lectura CLINO si BACKCLINO nu concorda cu %s grade"

#. TRANSLATORS: A computer mouse, not the rodent sort ;)
#. Actually, mouse is somewhat imprecise as it could refer to a trackerball
#. or joystick, but mouse is more compact than "pointing device" and usually
#. correct.
msgid "No mouse detected"
msgstr "Nu s-a gasit nici un mouse"

#. TRANSLATORS: %05.1f will be replaced by something like "123.4"
msgid "Plan, %05.1f up screen"
msgstr "Plan, %05.1f daca se afla in partea de sus a ecranului"

msgid "View towards %05.1f"
msgstr "Vizualizare in directia %05.1f"

#. TRANSLATORS: de: Or shorter, just have - `siehe Handbuch' for the second half.
msgid "You need to calibrate your printer - see the manual for details."
msgstr "Este necesara reglarea imprimantei - consultati manualul pentru detalii"

#: ../src/commands.c:996
#, c-format
msgid "`*data %s %c …' is deprecated - use `*data %s …' instead"
msgstr "`*data %s %c …' nu este agreata - folositi `*data %s …' in loc"

#: ../src/extend.c:491
msgid "Reading in data - please wait…"
msgstr "Se citesc datele - va rog asteptati…"

#. TRANSLATORS: Probably not a .3D file.  caverot autoexec.bat would give this
#: ../src/3dtopos.c:154
#: ../src/3dtopos.c:160
#: ../src/cad3d.c:865
#: ../src/cad3d.c:876
#: ../src/img.c:180
#, c-format
msgid "Bad 3d image file `%s'"
msgstr "Fisier imagine 3d `%s' gresit"

#. TRANSLATORS: This is the date format string used to timestamp .3d files internally
#. Probably best to keep it the same for all translations
#: ../src/img.c:48
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: put in .3d file if we can't read the date/time
#: ../src/img.c:47
msgid "Date and time not available."
msgstr "Data si ora nu sunt disponibile."

#: ../src/img.c:181
#, c-format
msgid "Error reading from file `%s'"
msgstr "Eroare in citirea fisierului `%s'"

#: ../src/gfxcore.cc:2886
#: ../src/mainfrm.cc:322
#: ../src/mainfrm.cc:1728
#: ../src/mainfrm.cc:2179
#: ../src/filename.c:79
#: ../src/img.c:182
#, c-format
msgid "Error writing to file `%s'"
msgstr "Eroare in scrierea fisierului `%s'"

#: ../src/filename.c:82
msgid "Error writing to file"
msgstr "Eroare in scrierea fisierului"

#: ../src/sorterr.c:76
#: ../src/sorterr.c:93
#: ../src/sorterr.c:164
msgid "Couldn't parse .err file"
msgstr "Lectura fisierului .err nu a putut fi realizata"

#. TRANSLATORS: de: Es wurden %d Warnungen und %d Fehler registriert.
#: ../src/cavern.c:369
#, fuzzy, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "Au fost %d avertisment(e) si %d eroare(erori) - nu s-a generat nici un fisier."

#: ../src/img.c:183
#, c-format
msgid "File `%s' has a newer format than this program can understand"
msgstr "Fisierul `%s' are un format prea nou pe care acest program nu il poate intelege"

#: ../src/printwx.cc:634
msgid "North"
msgstr "Nord"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printwx.cc:651
msgid "Elevation on"
msgstr "Profil in directia"

#: ../src/printwx.cc:255
#: ../src/printwx.cc:637
msgid "Plan view"
msgstr "Plan"

#: ../src/gfxcore.cc:713
#: ../src/printwx.cc:257
#: ../src/printwx.cc:660
msgid "Elevation"
msgstr "Profil"

msgid "3d file"
msgstr "Fisier 3d"

#: ../src/cavern.c:331
msgid "Calculating statistics"
msgstr "Calculez statisticile"

#: ../src/readval.c:420
msgid "Expecting string field"
msgstr "Camp de caractere asteptat"

#: ../src/cmdline.c:190
msgid "too few arguments"
msgstr "Parametrii insuficienti"

#: ../src/cmdline.c:197
msgid "too many arguments"
msgstr "Prea multi parametrii"

#: ../src/cmdline.c:156
#: ../src/cmdline.c:159
#: ../src/cmdline.c:163
msgid "FILE"
msgstr "FISIER"

#. TRANSLATORS: a trailing traverse is a dead end back to a junction
#. fr: Eric has chosen the terminology used by toporobot: "sequence", though
#. toporobot uses the term to mean something more specific.  Not really an issue
#. since these messages really just give the end-user an indication that
#. progress is being made.
#: ../src/netskel.c:162
msgid "Removing trailing traverses"
msgstr "Elimin traversele terminale"

#: ../src/netskel.c:216
msgid "Concatenating traverses between nodes"
msgstr "Leg traversele dintre noduri"

#: ../src/netskel.c:409
msgid "Calculating traverses between nodes"
msgstr "Calculez traversele dintre noduri"

#: ../src/netskel.c:739
msgid "Calculating trailing traverses"
msgstr "Calculez traversele terminale"

#: ../src/network.c:82
msgid "Simplifying network"
msgstr "Simplific reteaua"

#: ../src/network.c:540
msgid "Calculating network"
msgstr "Calculez reteaua"

#: ../src/datain.c:1404
#, c-format
msgid "Found `%s', expecting `F' or `B'"
msgstr "Am gasit `%s', asteptam `F' sau `B'"

#: ../src/cavern.c:425
msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
msgstr "Lungimea totala a masuratorilor topografiei = %7.2fm (%7.2fm ajustat)"

#: ../src/cavern.c:428
msgid "Total plan length of survey legs = %7.2fm"
msgstr "Lungimea totala in plan a masuratorilor topografiei = %7.2fm"

#: ../src/cavern.c:431
msgid "Total vertical length of survey legs = %7.2fm"
msgstr "Lungimea totala verticala a masuratorilor topografiei = %7.2fm"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:437
msgid "Vertical range = %4.2fm (from "
msgstr "Interval vertical = %4.2fm (de la "

#. TRANSLATORS: for many translations, 196/197 will be the same as 136/137
#: ../src/cavern.c:438
msgid " at %4.2fm to "
msgstr " la %4.2fm de la "

#: ../src/cavern.c:438
msgid " at %4.2fm)"
msgstr " la %4.2fm)"

#. TRANSLATORS: de: There _is_ a technical term for this which I fail to remember at the moment.
#: ../src/cavern.c:413
msgid "There is 1 loop."
msgstr "Este 1 inchidere."

#. TRANSLATORS: de: There _is_ a technical term for this which I fail to remember at the moment.
#: ../src/cavern.c:415
#, c-format
msgid "There are %ld loops."
msgstr "Sunt %ld inchideri."

#. TRANSLATORS: CPU isn't CPU in French
#: ../src/cavern.c:353
msgid "CPU time used %5.2fs"
msgstr "Timp CPU folosit %5.2fs"

#: ../src/cavern.c:356
msgid "Time used %5.2fs"
msgstr "Timp utilizat %5.2fs"

#: ../src/cavern.c:358
msgid "Time used unavailable"
msgstr "Timp utilizat indisponibil"

#: ../src/cavern.c:361
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "Timp utilizat %5.2fs (timp CPU %5.2fs)"

#: ../src/cavern.c:365
msgid "Done."
msgstr "Gata."

#: ../src/netskel.c:717
msgid "Original length%7.2fm (%3d legs), moved%7.2fm (%5.2fm/leg). "
msgstr "Lungimea originala%7.2fm (%3d legs), ajustata%7.2fm (%5.2fm/masuratoare). "

#: ../src/netskel.c:720
msgid "Error%7.2f%%"
msgstr "Eroare%7.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
#. error per metre is meaningless
#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
#. the numbers in the message above.
#: ../src/netskel.c:722
msgid "Error    N/A"
msgstr "Eroare    N/A"

#: ../src/cavern.c:439
msgid "North-South range = %4.2fm (from "
msgstr "Extindere Nord-Sud = %4.2fm (de la "

#: ../src/cavern.c:441
msgid "East-West range = %4.2fm (from "
msgstr "Extindere Est-Vest = %4.2fm (de la "

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:127
msgid "display this help and exit"
msgstr "afişează acest mesaj şi termină"

#. TRANSLATORS: description of --verbose option
#: ../src/cmdline.c:128
msgid "output version information and exit"
msgstr "afişează informaţii despre versiune şi termină"

#. TRANSLATORS: As in "printer driver"
msgid "Driver"
msgstr "Driver"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]...
#: ../src/cmdline.c:148
msgid "OPTION"
msgstr "OPŢIUNE"

#: ../src/printwx.cc:220
#: ../src/printwx.cc:672
#: ../src/printwx.cc:733
msgid "Scale"
msgstr "Scara"

msgid "Continue"
msgstr "Continua"

msgid "Exiting."
msgstr "Iesire"

#: ../src/cmdline.c:172
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Încercaţi `%s --help' pentru informaclţii suplimentare.\n"

msgid "Plan or Elevation"
msgstr "Plan sau profil"

msgid "Bearing up page (degrees): "
msgstr "Azimut in susul paginii (grade): "

msgid "View towards: "
msgstr "Vizualizare in directia: "

#. TRANSLATORS: de: I would have written "Blickneigung" or something like that, but this
#. would have made the sign convention even more counterintuitive.
msgid "Tilt (degrees): "
msgstr "Inclinare (grade): "

#, c-format
msgid "Please enter Map Scale = X:Y (default 1:%d)\n: "
msgstr "Va rog introduceti Scara Hartii = X:Y (default 1:%d)\n: "

msgid "Using scale %.0f:%.0f"
msgstr "Scara folosita %.0f:%.0f"

msgid "Print which pages?\n(RETURN for all; 'n' for one page, 'm-n', 'm-', '-n' for a range)\n: "
msgstr "Ce pagini imprim?\n(RETURN pentru toate; 'n' pentru o pagina, 'm-n', 'm-', '-n' pentru un interval)\n: "

#. TRANSLATORS: e.g. "Printing to `somefile.ps'..." / "Printing to `Laserjet4 on amachine...'
#, c-format
msgid "Printing to `%s'…"
msgstr "Imprim la `%s'…"

#: ../src/avenprcore.cc:262
#, c-format
msgid "Page %d of %d"
msgstr "Pagina %d din %d"

#: ../src/avenprcore.cc:266
#: ../src/printwx.cc:1172
#, c-format
msgid "Survey `%s'   Page %d (of %d)   Processed on %s"
msgstr "Topografia `%s'   Pagina %d (din %d)   Procesat in %s"

#. TRANSLATORS: This is used on printouts of plan views, and gives the bearing up the page
#. (so if North is across the page to the right, 270 is "Up page"
#: ../src/printwx.cc:677
msgid "Up page"
msgstr "In susul paginii"

#. TRANSLATORS: This is used on printouts of elevations
#. It gives the bearing we're looking in the direction of
#: ../src/printwx.cc:677
msgid "View"
msgstr "Vizualizare"

#, c-format
msgid "This will need %d pages (%dx%d)."
msgstr "Aceasta va necesita %d pagini (%dx%d)."

msgid "This will need 1 page."
msgstr "Aceasta va necesita 1 pagina."

#: ../src/cavern.c:399
msgid "Survey contains 1 survey station,"
msgstr "Topografia contine 1 punct de statie,"

#: ../src/cavern.c:401
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "Topografia contine %ld puncte de statie,"

#: ../src/cavern.c:405
msgid " joined by 1 leg."
msgstr " unite printr-o masuratoare."

#: ../src/cavern.c:407
#, c-format
msgid " joined by %ld legs."
msgstr " unite prin %ld masuratori."

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:159
msgid "node"
msgstr "nod"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:159
msgid "nodes"
msgstr "noduri"

#. TRANSLATORS: connected component in the graph theory sense
#. It means there are %ld bits of survey with no connections between them
#. This message is only used if there are more than 1
#: ../src/cavern.c:421
#, c-format
msgid "Survey has %ld connected components."
msgstr "Topografia contine %ld componente conexe."

#, c-format
msgid "Bad list of pages to print `%s'"
msgstr "Lista de pagini de imprimat `%s' incorecta"

#. TRANSLATORS: menu commands for (ynq) style choices (may become menu entries later)
msgid "yes"
msgstr "da"

msgid "no"
msgstr "nu"

#. TRANSLATORS: de: or `aufhören'.  These are parts of menus, right?  as in `yes,no,abort'?
#. In fact, `verlassen' is only appropriate when you want to quit the whole
#. program.  If you just want to abort an action, it ought to be `Abbruch'.
#. Yes this is a noun not a verb, but that's what's commonly used.
#. If this one is part of a (yes,no,quit) selection based on the first letter, it
#. is better to use this message (even if it isn't usual):
msgid "quit"
msgstr "anuleaza"

msgid "plan"
msgstr "plan"

msgid "elevation"
msgstr "profil"

#: ../src/cmdline.c:219
#: ../src/cmdline.c:238
#, c-format
msgid "numeric argument `%s' out of range"
msgstr "argumentul numeric `%s' in afara intervalului acceptat"

#: ../src/cmdline.c:221
#, c-format
msgid "argument `%s' not an integer"
msgstr "argumentul `%s' nu este un intreg"

#: ../src/cmdline.c:240
#, c-format
msgid "argument `%s' not a number"
msgstr "argumentul `%s' nu este un numar"

#. TRANSLATORS: de: NB there is no comma before "oder"
#: ../src/commands.c:768
msgid "Expecting `DUPLICATE', `SPLAY', or `SURFACE'"
msgstr "Astept `DUPLICATE', `SPLAY', sau `SURFACE'"

#. TRANSLATORS: de: NB there is no comma before "oder"
#: ../src/commands.c:770
msgid "Expecting `NOT', `DUPLICATE', `SPLAY', or `SURFACE'"
msgstr "Astept `NOT', `DUPLICATE', `SPLAY' sau `SURFACE'"

#: ../src/listpos.c:86
#, c-format
msgid "Station `%s' referred to by *entrance or *export but never used"
msgstr "Punctul de statie `%s' a fost definit ca *entrance sau *export dar nu a fost folost"

#: ../src/printwx.cc:665
msgid "Extended elevation"
msgstr "Profil longitudinal"

#: ../src/commands.c:567
msgid "No matching BEGIN"
msgstr "Lipseste BEGIN corespunzator"

#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it's
#. given at all
#: ../src/commands.c:589
msgid "Prefix tag doesn't match BEGIN"
msgstr "Prefixul nu corespunde cu cel al lui BEGIN"

#: ../src/commands.c:593
msgid "Closing prefix omitted from END"
msgstr "Prefixul de incheiere omis in END"

#. TRANSLATORS: heading line for .pos file
#. please try to ensure the ','s (or at least the columns) are in the same place
#: ../src/3dtopos.c:109
msgid "( Easting, Northing, Altitude )"
msgstr "( Est (X), Nord (Y), Altitudine Z )"

#: ../src/readval.c:444
#: ../src/readval.c:454
#: ../src/readval.c:462
#, c-format
msgid "Expecting date, found `%s'"
msgstr "Date asteptate, `%s' gasit"

msgid "Only load the sub-survey with prefix"
msgstr "Incarcati doar sub-topografia cu prefixul"

#. TRANSLATORS: error message given by "*units tape 0 feet" - it's meaningless to say
#. your tape is marked in "0 feet" (but you might measure distance by counting
#. knots on a diving line, and tie them every "2 feet").
#: ../src/commands.c:1223
msgid "*UNITS factor must be non-zero"
msgstr "Factorul *UNITS trebie sa fie diferit de zero"

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:720
msgid "&Screenshot…"
msgstr "&Captura ecran…"

#: ../src/mainfrm.cc:1254
#, c-format
msgid "No survey data in 3d file `%s'"
msgstr "Nu exista date de topografie in fisierul 3d `%s'"

#: ../src/gfxcore.cc:671
msgid "Facing"
msgstr "Directie"

msgid "Close"
msgstr "Închide"

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:69
#, c-format
msgid "About %s"
msgstr "Despre %s"

#. TRANSLATORS: Aven menu items.  An '@' goes before the letter of any accelerator key.
#. The string "\t" separates the menu text and any accelerator key.
#. File->Open dialog:
#: ../src/mainfrm.cc:1701
msgid "Select a 3d file to view"
msgstr "Selectati un fisier 3d pentru vizualizare"

#: ../src/mainfrm.cc:1692
msgid "Survex 3d files"
msgstr "Fisier Survex 3d"

#: ../src/mainfrm.cc:1697
#: ../src/mainfrm.cc:2096
msgid "All files"
msgstr "Toate fisierele"

#. TRANSLATORS: in the about box (summarising the purpose of aven)
#: ../src/aboutdlg.cc:87
msgid "Survey visualisation tool"
msgstr "Utilitar pentru vizualizarea topografiei"

#. TRANSLATORS: Aven menu titles.  An '@' goes before the letter of any accelerator key.
#. The accelerators must be different within this group
#: ../src/mainfrm.cc:832
msgid "&File"
msgstr "&Fişier"

#: ../src/mainfrm.cc:833
msgid "&Rotation"
msgstr "&Rotire"

#: ../src/mainfrm.cc:834
msgid "&Orientation"
msgstr "&Orientare"

#: ../src/mainfrm.cc:835
msgid "&View"
msgstr "&Vizualizare"

#: ../src/mainfrm.cc:837
msgid "&Controls"
msgstr "&Controale"

#: ../src/mainfrm.cc:843
msgid "&Help"
msgstr "&Ajutor"

#: ../src/mainfrm.cc:839
msgid "&Presentation"
msgstr "&Prezentare"

#: ../src/aboutdlg.cc:98
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "Acest program este liber; îl puteţi redistribui şi/sau modifica în conformitate cu termenii Licenţei Publice Generale GNU aşa cum este publicată de Free Software Foundation; fie versiunea 2 Licenţei, fie (la latitudinea dumneavoastră) orice versiune ulterioară."

#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:715
msgid "&Open…\tCtrl+O"
msgstr "&Deschide…\tCtrl+O"

#: ../src/mainfrm.cc:727
msgid "&Quit\tCtrl+Q"
msgstr "&Termină\tCtrl+Q"

#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
#: ../src/commands.c:1079
msgid "NEWLINE can't be the first reading"
msgstr "NEWLINE nu poate fi prima lectura"

#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
#: ../src/commands.c:1112
msgid "NEWLINE can't be the last reading"
msgstr "NEWLINE nu poate fi ultima lectura"

#. TRANSLATORS: error from "*data normal station tape compass clino"
#. ro: this might do...
#: ../src/commands.c:1134
msgid "Interleaved readings, but no NEWLINE"
msgstr "Lectura pe mai multe randuri, dar nici o NEWLINE"

#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
#: ../src/commands.c:1026
#, c-format
msgid "Reading `%s' must occur before NEWLINE"
msgstr "Lectura `%s' trebuie sa preceada NEWLINE"

#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
#: ../src/commands.c:1073
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "en:226 NEWLINE poate fi precedat doar de STATION, DEPTH, si COUNT"

#: ../src/commands.c:1257
msgid "Can't calibrate angular and length quantities together"
msgstr "Nu pot calibra unghiurile verticale si lungimile in acelasi timp"

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
#. height values).
msgid "Select a terrain file to view"
msgstr "Selectati un model digital al terenului pentru vizualizare"

msgid "Terrain files"
msgstr "Model digital al terenului"

#. TRANSLATORS: Used in the "Export" settings dialog
#: ../src/printwx.cc:298
msgid "&Export…"
msgstr "&Exporta…"

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
#. Tickable menu item which toggles auto rotation
#: ../src/mainfrm.cc:733
msgid "Au&to-Rotate\tSpace"
msgstr "&Auto-rotatie\tSpace"

#: ../src/mainfrm.cc:735
msgid "Speed &Up"
msgstr "A&ccelereaza rotatia"

#: ../src/mainfrm.cc:736
msgid "Slow &Down"
msgstr "&Incetineste rotatia"

#: ../src/mainfrm.cc:738
msgid "&Reverse Direction"
msgstr "&Schimba directia"

#: ../src/mainfrm.cc:740
msgid "Step Once &Anticlockwise"
msgstr "Un pas in sens a&ntiorar"

#. TRANSLATORS: ro: antiorar is somehow forced. a genuine translation would sound like
#. ro: anticlockwise = in sens contrar acelor de ceasornic
#: ../src/mainfrm.cc:741
msgid "Step Once &Clockwise"
msgstr "Un pas in sens o&rar"

#: ../src/mainfrm.cc:798
msgid "&Perspective"
msgstr "Perspecti&va"

#: ../src/mainfrm.cc:800
msgid "Textured &Walls"
msgstr "Pereti cu te&xtura"

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
#. instead if it gives a better translation which most users will understand.
#: ../src/mainfrm.cc:801
msgid "Fade Distant Ob&jects"
msgstr "&Obiecte indepartate neclare"

#. TRANSLATORS: View *looking* North
#: ../src/mainfrm.cc:744
msgid "View &North"
msgstr "Vizualizare spre &Nord"

#. TRANSLATORS: View *looking* East
#: ../src/mainfrm.cc:745
msgid "View &East"
msgstr "Vizualizare spre &Est"

#. TRANSLATORS: View *looking* South
#: ../src/mainfrm.cc:746
msgid "View &South"
msgstr "Vizualizare spre &Sud"

#. TRANSLATORS: View *looking* West
#: ../src/mainfrm.cc:747
msgid "View &West"
msgstr "Vizualizare spre &Vest"

#: ../src/mainfrm.cc:749
msgid "Shift Survey &Left"
msgstr "Mutati topografia spre S&tanga"

#: ../src/mainfrm.cc:750
msgid "Shift Survey &Right"
msgstr "Mutati topografia spre &Dreapta"

#: ../src/mainfrm.cc:751
msgid "Shift Survey &Up"
msgstr "Mutati topografia In s&us"

#: ../src/mainfrm.cc:752
msgid "Shift Survey &Down"
msgstr "Mutati topografia In &jos"

#: ../src/mainfrm.cc:754
msgid "&Plan View"
msgstr "&Plan"

#: ../src/mainfrm.cc:755
msgid "Ele&vation"
msgstr "Profi&l"

#: ../src/mainfrm.cc:757
msgid "&Higher Viewpoint"
msgstr "Punct de vizualizare mai in&alt"

#: ../src/mainfrm.cc:758
msgid "L&ower Viewpoint"
msgstr "Punct de vizualizare mai j&os"

#. TRANSLATORS: fr: or "Agrandir"
#. pt or "Ampliar"
#. es or "Aumentar"
#. it: or "Ingrandisci"
#: ../src/mainfrm.cc:760
msgid "&Zoom In\t]"
msgstr "&Mărire\t]"

#. TRANSLATORS: fr: or "Réduire"
#. pt or "Reduzir"
#. it: or "Riduci"
#: ../src/mainfrm.cc:761
msgid "Zoo&m Out\t["
msgstr "Mi&cşorare\t["

#: ../src/mainfrm.cc:763
msgid "Restore De&fault View"
msgstr "&Restabiliti setarile initiale"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn't a
#. good name for this but nothing better has yet come to mind!
#: ../src/printwx.cc:215
msgid "Elements"
msgstr "Elemente"

#: ../src/printwx.cc:234
#: ../src/printwx.cc:421
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d pagini (%dx%d)"

#. TRANSLATORS: used in the scale drop down selector in the print dialog
#. the implicit meaning is "choose a suitable scale to fit the
#. plot on a single page", but we need something shorter
#: ../src/printwx.cc:221
#: ../src/printwx.cc:453
msgid "One page"
msgstr "O pagina"

#: ../src/printwx.cc:241
msgid "Bearing"
msgstr "Azimut"

#: ../src/printwx.cc:271
msgid "Station Names"
msgstr "Numele punctelor de statie"

#: ../src/printwx.cc:269
msgid "Crosses"
msgstr "Cruci"

#. TRANSLATORS: de:262 Strecken
#: ../src/printwx.cc:265
msgid "Underground Survey Legs"
msgstr "Portiuni subterane ale topografiei"

#. TRANSLATORS: Used in the print dialog:
#: ../src/printwx.cc:246
msgid "Tilt angle"
msgstr "Unghi de inclinatie"

#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
#: ../src/printwx.cc:274
msgid "Page Borders"
msgstr "Limite pagina"

#. TRANSLATORS: used in the print dialog - controls drawing the box at the lower left
#. with survey name, view angles, etc
#: ../src/printwx.cc:278
msgid "Info Box"
msgstr "Caseta de informatii"

#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
#. (otherwise they'll be skipped to save paper)
#: ../src/printwx.cc:276
msgid "Blank Pages"
msgstr "Document nou"

#: ../src/mainfrm.cc:777
msgid "Station &Names\tCtrl+N"
msgstr "&Numele punctelor de statie\tCtrl+N"

#: ../src/mainfrm.cc:779
msgid "&Crosses\tCtrl+X"
msgstr "&Cruci\tCtrl+X"

#: ../src/mainfrm.cc:783
msgid "&Underground Survey Legs\tCtrl+L"
msgstr "&Portiuni subterane ale topografiei\tCtrl+L"

#: ../src/mainfrm.cc:786
msgid "&Overlapping Names"
msgstr "Nu&me suprapuse"

#: ../src/mainfrm.cc:817
msgid "&Compass"
msgstr "&Busola"

#: ../src/mainfrm.cc:818
msgid "C&linometer"
msgstr "&Clinometru"

#: ../src/mainfrm.cc:819
msgid "&Depth Bar"
msgstr "Bara de control a &adancimii"

#: ../src/mainfrm.cc:820
msgid "&Scale Bar"
msgstr "Bara de control a &scarii"

#: ../src/mainfrm.cc:812
msgid "&Reverse Sense\tCtrl+R"
msgstr "&Schimbati sensul\tCtrl+R"

#. TRANSLATORS: sk: Netuším o čo ide
#. ro: to find a better way to express that
#: ../src/mainfrm.cc:796
#: ../src/mainfrm.cc:814
msgid "&Cancel Measuring Line\tEscape"
msgstr "&Anulati linia de masura\tEscape"

#: ../src/mainfrm.cc:789
#, fuzzy
msgid "Colour by E&rror"
msgstr "Colour b&y Error"

#: ../src/mainfrm.cc:829
msgid "&About…"
msgstr "&Despre…"

#: ../src/mainfrm.cc:784
msgid "&Surface Survey Legs\tCtrl+F"
msgstr "Portiuni de &suprafata ale topografiei\tCtrl+F"

#: ../src/mainfrm.cc:787
msgid "Colour by &Depth"
msgstr "Culori in functie de &adancime"

#: ../src/mainfrm.cc:788
msgid "Colour by D&ate"
msgstr "Culori in functie de &Data"

#: ../src/mainfrm.cc:791
msgid "Highlight &Entrances"
msgstr "Marcheaza &Intrarile"

#: ../src/mainfrm.cc:792
msgid "Highlight &Fixed Points"
msgstr "Marcheaza Punctele &Fixe"

#: ../src/mainfrm.cc:793
msgid "Highlight E&xported Points"
msgstr "Marcheaza Punctele &Exportate"

#: ../src/mainfrm.cc:780
msgid "&Grid\tCtrl+G"
msgstr "&Grid\tCtrl+G"

#: ../src/mainfrm.cc:802
msgid "Smoot&hed Survey Legs"
msgstr "Elementele topografiei &rotunjite"

#: ../src/mainfrm.cc:821
msgid "&Indicators"
msgstr "I&ndicatorii"

#: ../src/z_getopt.c:695
#: ../src/z_getopt.c:707
#, c-format
msgid "%s: option `%s' is ambiguous\n"
msgstr "%s: opţiunea `%s' este ambiguă\n"

#: ../src/z_getopt.c:1023
#: ../src/z_getopt.c:1034
#, c-format
msgid "%s: option `-W %s' is ambiguous\n"
msgstr "%s: opţiunea `-W %s' este ambiguă\n"

#: ../src/z_getopt.c:751
#: ../src/z_getopt.c:755
#, c-format
msgid "%s: option `%c%s' doesn't allow an argument\n"
msgstr "%s: opţiunea `%c%s' nu permite un argument\n"

#: ../src/z_getopt.c:740
#: ../src/z_getopt.c:743
#, c-format
msgid "%s: option `--%s' doesn't allow an argument\n"
msgstr "%s: opţiunea `--%s' nu permite un argument\n"

#: ../src/z_getopt.c:1058
#: ../src/z_getopt.c:1069
#, c-format
msgid "%s: option `-W %s' doesn't allow an argument\n"
msgstr "%s: opţiunea `-W %s' nu permite un argument\n"

#: ../src/z_getopt.c:790
#: ../src/z_getopt.c:802
#: ../src/z_getopt.c:1089
#: ../src/z_getopt.c:1101
#, c-format
msgid "%s: option `%s' requires an argument\n"
msgstr "%s: opţiunea `%s' necesită un argument\n"

#: ../src/z_getopt.c:960
#: ../src/z_getopt.c:971
#: ../src/z_getopt.c:1154
#: ../src/z_getopt.c:1166
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: opţiunea necesită un argument -- %c\n"

#: ../src/z_getopt.c:840
#: ../src/z_getopt.c:843
#, c-format
msgid "%s: unrecognized option `--%s'\n"
msgstr "%s: opţiune nerecunoscută `--%s'\n"

#: ../src/z_getopt.c:851
#: ../src/z_getopt.c:854
#, c-format
msgid "%s: unrecognized option `%c%s'\n"
msgstr "%s: opţiune nerecunoscută `%c%s'\n"

#: ../src/z_getopt.c:901
#: ../src/z_getopt.c:904
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: opţiune ilegală -- %c\n"

#: ../src/z_getopt.c:910
#: ../src/z_getopt.c:913
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: opţiune invalidă -- %c\n"

#: ../src/mainfrm.cc:766
msgid "&New Presentation"
msgstr "Prezentare &noua"

#: ../src/mainfrm.cc:767
msgid "&Open Presentation…"
msgstr "&Deschidere prezentare…"

#: ../src/mainfrm.cc:768
msgid "&Save Presentation"
msgstr "&Salvare Prezentare"

#: ../src/mainfrm.cc:769
msgid "Sa&ve Presentation As…"
msgstr "Salvare Prezentare &ca…"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:771
msgid "&Mark"
msgstr "&Marcheaza"

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:772
msgid "Pla&y"
msgstr "&Vizualizeaza"

#. TRANSLATORS: de: "als Animation" could also be used here.
#: ../src/mainfrm.cc:773
msgid "&Export as Movie…"
msgstr "&Exporta ca Animatie…"

#: ../src/mainfrm.cc:781
msgid "&Bounding Box\tCtrl+B"
msgstr "Cadr&u\tCtrl+B"

#. TRANSLATORS: TRANSLATE: ro
#: ../src/mainfrm.cc:309
msgid "Select an output filename"
msgstr "Selectati un fisier pentru iesire"

#: ../src/mainfrm.cc:306
#: ../src/mainfrm.cc:2095
msgid "Aven presentations"
msgstr "Prezentare Aven"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1714
msgid "Save Screenshot"
msgstr "Salvare captura de ecran"

#: ../src/mainfrm.cc:2090
#: ../src/mainfrm.cc:2093
msgid "Select a presentation to open"
msgstr "Deschidere prezentare"

#: ../src/mainfrm.cc:388
#, c-format
msgid "Error in format of presentation file `%s'"
msgstr "Eroare in formatul fisierului prezentare `%s'"

#. TRANSLATORS: "Compass" as in Larry Fish's cave surveying package, so probably shouldn't
#. be translated
#: ../src/mainfrm.cc:1694
msgid "Compass PLT files"
msgstr "Fisier Compass PLT"

#. TRANSLATORS: "CMAP" is Bob Thrun's cave surveying package, so don't translate it.
#: ../src/mainfrm.cc:1696
msgid "CMAP XYZ files"
msgstr "Fisier CMAP XYZ"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1770
#: ../src/mainfrm.cc:2067
#: ../src/mainfrm.cc:2084
msgid "Modified Presentation"
msgstr "Prezentare Modificata"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1769
#: ../src/mainfrm.cc:2066
#: ../src/mainfrm.cc:2083
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "Prezentarea curenta a fost modificata. Se abandoneaza schimbarile nesalvate?"

#: ../src/mainfrm.cc:2372
#: ../src/mainfrm.cc:2381
msgid "No matches were found."
msgstr "Nici un element nua fost gasit."

#. TRANSLATORS: UNUSED
msgid "Open &Terrain…"
msgstr "Deschidere &Model Teren…"

#. TRANSLATORS: UNUSED
msgid "Solid Su&rface"
msgstr "Suprafata S&olida"

#. TRANSLATORS: number of stations found matching search
#, c-format
msgid "%d found"
msgstr "%d gasit"

#. TRANSLATORS: "Find stations" button label
#: ../src/mainfrm.cc:894
msgid "Find"
msgstr "Găseşte"

#. TRANSLATORS: "Hide stations" button label
#: ../src/mainfrm.cc:896
msgid "Hide"
msgstr "Ascunde"

#. TRANSLATORS: checkbox for regular expression search
#: ../src/mainfrm.cc:914
msgid "Regular expression"
msgstr "Expresie normala"

#: ../src/mainfrm.cc:193
#: ../src/mainfrm.cc:1843
#: ../src/mainfrm.cc:1847
#: ../src/mainfrm.cc:1912
#: ../src/mainfrm.cc:1914
#: ../src/mainfrm.cc:1957
#: ../src/mainfrm.cc:1961
msgid "Altitude"
msgstr "Altitudine"

#. TRANSLATORS: error if you try to drag multiple files to the aven window
#: ../src/mainfrm.cc:654
msgid "You may only view one 3d file at a time."
msgstr "Puteti vizualiza doar un fisier 3d odata"

#: ../src/mainfrm.cc:822
#, fuzzy
msgid "&Side Panel"
msgstr "&Cadran lateral"

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
#. de: alternatively "%.2f O, %.2f N", but H/R is consistent with headings in pos files
#: ../src/mainfrm.cc:1842
#: ../src/mainfrm.cc:1845
#: ../src/mainfrm.cc:1868
#: ../src/mainfrm.cc:1870
#: ../src/mainfrm.cc:1956
#: ../src/mainfrm.cc:1959
msgid "%.2f E, %.2f N"
msgstr "%.2f E, %.2f N"

#. TRANSLATORS: Used in Aven:
#. From <stationname>
#. H: 123.45m V: 234.56m
#. Dist: 456.78m  Brg: 200
#: ../src/mainfrm.cc:1885
#: ../src/mainfrm.cc:1924
#: ../src/mainfrm.cc:1980
#, c-format
msgid "From %s"
msgstr "De la %s"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:1984
#: ../src/mainfrm.cc:1987
#, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "H %.2f%s, V %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:2000
#: ../src/mainfrm.cc:2004
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
msgstr "%s: %s, Dist %.2f%s, Azim %03d%s"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/mainfrm.cc:824
msgid "&Metric"
msgstr "&Metric"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/mainfrm.cc:825
msgid "&Degrees"
msgstr "&Grade"

#. TRANSLATORS: alternative angle units (400 grad = 360 degrees)
#. try to make this as short as possible...
#. ca:345 graus centesimals
#. es:345 grados centesimales
#. it:345 gradi centesimali
#: ../src/mainfrm.cc:1892
#: ../src/mainfrm.cc:1996
msgid "grad"
msgstr "gr.cent"

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:778
msgid "Passage &Tubes\tCtrl+T"
msgstr "Pasaje &Tub\tCtrl+T"

#: ../src/mainfrm.cc:807
msgid "&Preferences…"
msgstr "&Preferinte…"

#: ../src/tubeprefs.cc:37
msgid "Draw passage walls"
msgstr "Deseneaza peretii"

#: ../src/tubeprefs.cc:39
msgid "Estimate LRUD readings based on heuristics"
msgstr "Estimeaza masuratorile SDSJ pe baze euristice"

#: ../src/stnprefs.cc:62
msgid "Mark survey stations with crosses"
msgstr "Marcheaza punctele de statie cu cruci"

#: ../src/stnprefs.cc:63
msgid "Highlight stations marked as entrances"
msgstr "Evidentiaza punctele de statie selectate ca intrari"

#: ../src/stnprefs.cc:65
msgid "Highlight stations marked as fixed points"
msgstr "Evidentiaza punctele de statie selectate ca puncte fixe"

#: ../src/stnprefs.cc:66
msgid "Highlight stations which are exported"
msgstr "Evidentiaza punctele de statie care sunt exportate"

#: ../src/stnprefs.cc:67
msgid "Mark survey stations with their names"
msgstr "Marcheaza punctele de statie cu numele lor"

#: ../src/stnprefs.cc:69
msgid "Allow names to overlap on the display (faster)"
msgstr "Permite suprapunerea numelor (mai rapid)"

#: ../src/mainfrm.cc:804
msgid "Full Screen &Mode\tF11"
msgstr "Afisare pe tot ecranu&l\tF11"

#: ../src/legprefs.cc:39
msgid "Display underground survey legs"
msgstr "Afisare masuratori subterane"

#: ../src/legprefs.cc:40
msgid "Display surface survey legs"
msgstr "Afisare masuratori de suprafata"

msgid "Colour surface surveys by depth"
msgstr "Colorare masuratori suprafata in functie de altitudine"

msgid "Draw surface legs with dashed lines"
msgstr "Deseneaza masuratorile de suprafata cu linie intrerupta"

#: ../src/gridprefs.cc:36
msgid "Draw a grid"
msgstr "Afiseaza un grid"

#: ../src/unitsprefs.cc:44
msgid "metric units"
msgstr "Metri"

#: ../src/unitsprefs.cc:46
msgid "imperial units"
msgstr "unitati masura englezesti"

#: ../src/unitsprefs.cc:47
msgid "degrees (°)"
msgstr "grade sexagesimale (°)"

#: ../src/unitsprefs.cc:49
msgid "grads"
msgstr "grade zecimale"

#: ../src/unitsprefs.cc:53
msgid "Display measurements in"
msgstr "Afisare distante in"

#: ../src/unitsprefs.cc:61
msgid "Display angles in"
msgstr "Afisare unghiuri in"

#. TRANSLATORS: reverses the sense of the mouse controls
#: ../src/ctlprefs.cc:38
msgid "Reverse the sense of the controls"
msgstr "Schimba sensul butoanelor de control"

#: ../src/indicatorprefs.cc:39
msgid "Display scale bar"
msgstr "Afiseaza scara"

#: ../src/indicatorprefs.cc:40
msgid "Display depth bar"
msgstr "Afiseaza scara de adancime"

#: ../src/indicatorprefs.cc:41
msgid "Display compass"
msgstr "Afiseaza busola"

#: ../src/indicatorprefs.cc:42
msgid "Display clinometer"
msgstr "Afiseaza clinometrul"

#: ../src/winprefs.cc:42
msgid "Display side panel"
msgstr "Afiseaza casuta laterala"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:1896
#: ../src/mainfrm.cc:1899
#, fuzzy, c-format
msgid "%s: H %.2f%s, Brg %03d%s"
msgstr "%s: H %.2f%s, Azim %03d%s"

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:1927
#: ../src/mainfrm.cc:1930
#, fuzzy, c-format
msgid "%s: V %.2f%s"
msgstr "%s: V %.2f%s"

#. TRANSLATORS: labels for tabbed side panel
#. this is for the tab with the tree hierarchy of survey station names
#: ../src/mainfrm.cc:947
msgid "Surveys"
msgstr "Masuratori"

#: ../src/mainfrm.cc:948
msgid "Presentation"
msgstr "Prezentare"

#: ../src/mainfrm.cc:191
msgid "Easting"
msgstr "Est"

#: ../src/mainfrm.cc:192
msgid "Northing"
msgstr "Nord"

#: ../src/mainfrm.cc:717
msgid "&Print…\tCtrl+P"
msgstr "&Imprimare…\tCtrl+P"

#: ../src/mainfrm.cc:718
msgid "P&age Setup…"
msgstr "Initializare &pagina…"

#: ../src/mainfrm.cc:721
msgid "&Export as…"
msgstr "&Exporta ca…"

#. TRANSLATORS: Title of the export dialog
#: ../src/printwx.cc:171
msgid "Export"
msgstr "Exporta"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:134
msgid "System Information:"
msgstr "Informatii despre Sistem:"

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printwx.cc:355
msgid "Print Preview"
msgstr "Vizualizare inaintea imprimarii"

#. TRANSLATORS: Title of the print dialog
#: ../src/printwx.cc:171
msgid "Print"
msgstr "Imprimare"

#: ../src/printwx.cc:293
#: ../src/printwx.cc:295
msgid "&Print"
msgstr "&Imprimare"

#: ../src/printwx.cc:291
msgid "Pre&view"
msgstr "&Vizualizare pre-imprimare"

#: ../src/printwx.cc:287
msgid "&Cancel"
msgstr "&Anulare"

#: ../src/printwx.cc:267
msgid "Sur&face Survey Legs"
msgstr "&Portiuni de suprafata ale topografiei"

#. TRANSLATORS: "%s" is replaced by the invalid expression
#, c-format
msgid "Invalid regular expression: %s"
msgstr "Expresie regulara incorecta: %s"

#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
#. things in future).
#: ../src/aven.cc:207
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn't available."
msgstr ""

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:158
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr "Mutat cu (%3.2f,%3.2f,%3.2f): %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:194
#, c-format
msgid "Added: %s"
msgstr "Adaugat: %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:216
#, c-format
msgid "Deleted: %s"
msgstr "Eliminat: %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this station, but we didn't find it in the 3d file
#: ../src/extend.c:258
#: ../src/extend.c:275
#: ../src/extend.c:315
#: ../src/extend.c:355
#: ../src/extend.c:395
#, c-format
msgid "Failed to find station %s"
msgstr "Nu s-a gasit punctul de statie %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this leg, but we didn't find it in the 3d file
#: ../src/extend.c:297
#: ../src/extend.c:337
#: ../src/extend.c:377
#: ../src/extend.c:417
#, c-format
msgid "Failed to find leg %s → %s"
msgstr "Nu s-a gasit masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#. "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:252
#, c-format
msgid "Starting from station %s"
msgstr "Incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:268
#, c-format
msgid "Extending to the left from station %s"
msgstr "Extindere spre stanga incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:308
#, c-format
msgid "Extending to the right from station %s"
msgstr "Extindere spre dreapta incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:287
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr "Extindere spre stanga incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:327
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr "Extindere spre drepta incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:388
#, c-format
msgid "Breaking survey loop at station %s"
msgstr "Topografia intrerupta incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:407
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr "Topografia intrerupta incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:348
#, c-format
msgid "Swapping extend direction from station %s"
msgstr "Schimbare directie desen incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:367
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr "Schimbare directie desen incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:536
#, c-format
msgid "Applying specfile: `%s'"
msgstr "Aplicare fisier de specificatii: `%s'"

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:596
#, c-format
msgid "Writing %s…"
msgstr "Scriere %s…"