source: git/lib/es.po @ dfc141d

msgid ""
msgstr ""
"Project-Id-Version: survex\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
"Last-Translator: Josep Guarro <josep@imapmail.org>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: es\n"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
#. was trying to allocate space for.
#: ../src/message.c:85
#: n:1
#, c-format
msgid "Out of memory (couldn’t find %lu bytes)."
msgstr "Memoria insuficiente (se necesitan %lu bytes de más)."

#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
#. greater" if that gives a more natural translation.  It's
#. technically not quite right when there are parallel active release
#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
#. seems unlikely to confuse users.
#: ../src/commands.c:1933
#: n:2
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "Para procesar estos datos topográficos se requiere la versión %s de Survex (o superior)."

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#: ../src/aven.cc:374
#: ../src/message.c:1245
#: n:4
msgid "warning"
msgstr "alerta"

#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
#. by the line number in that file.
#: ../src/datain.c:107
#: n:5
#, c-format
msgid "In file included from %s:%u:\n"
msgstr "En el archivo incluido desde %s:%u:\n"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:560
#: n:6
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix ya no se usa - utiliza *begin y *end en su lugar"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/readval.c:206
#: n:7
#, c-format
msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "Carácter “%c” no permitido en el nombre de una estación (utiliza *SET NAMES para definir los caracteres permitidos)"

#: ../src/readval.c:382
#: n:8
msgid "Field may not be omitted"
msgstr "Campo que no puede ser omitido"

#: ../src/datain.c:1526
#: ../src/datain.c:1812
#: ../src/readval.c:384
#: ../src/readval.c:425
#: ../src/readval.c:455
#: n:9
#, c-format
msgid "Expecting numeric field, found “%s”"
msgstr "Se espera un campo numérico; encontrado “%s”"

#: ../src/commands.c:1599
#: n:10
#, c-format
msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
msgstr "Encontrado “%s”, esperando “PRESERVE”, “TOUPPER”, o “TOLOWER”"

#: ../src/debug.h:45
#: ../src/debug.h:47
#: ../src/matrix.c:352
#: ../src/message.c:238
#: n:11
msgid "Bug in program detected! Please report this to the authors"
msgstr "Error detectado en el programa! Por favor comunícalo a los autores"

#: ../src/commands.c:2048
#: ../src/extend.c:435
#: n:12
#, c-format
msgid "Unknown command “%s”"
msgstr "Comando desconocido “%s”"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netbits.c:407
#: n:13
#, c-format
msgid "Station “%s” equated to itself"
msgstr "Estación “%s” igualada a si misma"

#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
#. survey stations.
#: ../src/datain.c:1047
#: n:14
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "La lectura de la brújula no se puede omitir excepto en tiradas a plomo"

#: ../src/datain.c:282
#: ../src/extend.c:440
#: n:15
msgid "End of line not blank"
msgstr "Fin de línea no vacio"

#: ../src/cavern.c:395
#: n:16
#, c-format
msgid "There were %d warning(s)."
msgstr "Havia %d alerta(s)."

#. TRANSLATORS: %s is replaced by the command we attempted to run.
#: ../src/cavernlog.cc:175
#: ../src/cavernlog.cc:233
#: n:17
#, fuzzy, c-format
msgid "Couldn’t run external command: “%s”"
msgstr "No se pudo abrir el “pipe”: “%s”"

#: ../src/datain.c:80
#: ../src/datain.c:88
#: ../src/datain.c:95
#: ../src/datain.c:766
#: ../src/extend.c:558
#: ../src/sorterr.c:80
#: ../src/sorterr.c:97
#: ../src/sorterr.c:240
#: n:18
msgid "Error reading file"
msgstr "Error leyendo el archivo"

#: ../src/message.c:1260
#: n:19
msgid "Too many errors - giving up"
msgstr "Demasiados errores - proceso abandonado"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:1478
#: n:20
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "*DEFAULT ya no se usa - utiliza *CALIBRATE/DATA/SD/UNITS con el argumento DEFAULT en su lugar"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
#. (a weight on a string).  So the problem here is that the leg is
#. vertical, so a compass reading has no meaning!
#: ../src/datain.c:1018
#: n:21
msgid "Compass reading given on plumbed leg"
msgstr "Lectura de brújula en una tirada vertical"

#: ../src/commands.c:648
#: n:22
msgid "END with no matching BEGIN in this file"
msgstr "END sin el correspondiente BEGIN en este archivo"

#: ../src/datain.c:753
#: n:23
msgid "BEGIN with no matching END in this file"
msgstr "BEGIN sin el correspondiente END en este archivo"

#: ../src/datain.c:399
#: ../src/img_hosted.c:30
#: ../src/printwx.cc:1527
#: n:24
#, c-format
msgid "Couldn’t open data file “%s”"
msgstr "No se pudo abrir el archivo de datos “%s”"

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
#. deprecated, so this error would be generated by:
#.
#. *equate \foo.7 1
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:463
#: ../src/readval.c:90
#: ../src/readval.c:94
#: n:25
msgid "ROOT is deprecated"
msgstr "ROOT ya no se usa"

#. TRANSLATORS: A station must be exported out of each level it is in, so
#. this would give "Station “\outer.inner.1” not exported from survey
#. “\outer”)":
#.
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#: ../src/commands.c:947
#: ../src/commands.c:949
#: ../src/listpos.c:104
#: ../src/readval.c:323
#: ../src/readval.c:326
#: n:26
#, c-format
msgid "Station “%s” not exported from survey “%s”"
msgstr "La estació “%s” no ha sido exportada desde la topografía “%s”"

#. TRANSLATORS: This error occurs if there's an attempt to
#. export a station from a survey which doesn't actually exist.
#: ../src/listpos.c:109
#: n:286
#, c-format
msgid "Reference to station “%s” from non-existent survey “%s”"
msgstr "Referencia a la estación “%s” desde una topografía inexistente “%s”"

#: ../src/readval.c:297
#: n:27
#, c-format
msgid "“%s” can’t be both a station and a survey"
msgstr "“%s” no puede ser a la vez una estación y una topografía"

#: ../src/extend.c:247
#: ../src/extend.c:266
#: ../src/extend.c:311
#: ../src/extend.c:353
#: ../src/extend.c:395
#: ../src/readval.c:202
#: n:28
msgid "Expecting station name"
msgstr "Esperando un nombre de estación"

#. TRANSLATORS: e.g.
#.
#. *begin crawl
#. 1 2 9.45 234 -01
#. *end crawl
#. *begin crawl    # <- warning here
#. 2 3 7.67 223 -03
#. *end crawl
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:537
#: n:29
#, fuzzy
msgid "Reentering an existing survey is deprecated"
msgstr "Reentrar en un nivel de prefijo existente yo no se usa"

#: ../src/commands.c:538
#: n:30
msgid "Originally entered here"
msgstr "Originalmente entrado aqui"

#: ../src/commands.c:1864
#: n:31
#, c-format
msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
msgstr "Encontrado “%s”, esperando “EQUATES”, “EXPORTS”, o “PLUMBS”"

#: ../src/commands.c:1871
#: n:32
#, c-format
msgid "Found “%s”, expecting “ON” or “OFF”"
msgstr "Encontrado “%s”, esperando “ON” o “OFF”"

#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
#. translated.
#: ../src/commands.c:911
#: n:33
msgid "Only one station in EQUATE command"
msgstr "Solo una estación en la orden EQUATE"

#: ../src/commands.c:410
#: n:34
#, c-format
msgid "Unknown quantity “%s”"
msgstr "Cantidad “%s” desconocida"

#: ../src/commands.c:327
#: n:35
#, c-format
msgid "Unknown units “%s”"
msgstr "Unidades “%s” desconocidas"

#: ../src/commands.c:1750
#: ../src/commands.c:1771
#: ../src/commands.c:1799
#: ../src/commands.c:1824
#: n:434
msgid "Unknown coordinate system"
msgstr ""

#: ../src/commands.c:1786
#: ../src/commands.c:1804
#: n:435
msgid "Coordinate system unsuitable for output"
msgstr ""

#: ../src/commands.c:824
#: n:436
msgid "Failed to convert coordinates"
msgstr ""

#: ../src/commands.c:829
#: n:437
msgid "The input project is set but the output projection isn't"
msgstr ""

#: ../src/commands.c:831
#: n:438
msgid "The output project is set but the input projection isn't"
msgstr ""

#: ../src/commands.c:729
#: n:439
msgid "Coordinates can't be omitted when coordinate system has been specified"
msgstr ""

#. TRANSLATORS: Used when a BEGIN command has no survey, but the
#. END command does, e.g.:
#.
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:670
#: n:36
#, fuzzy
msgid "Matching BEGIN command has no survey name"
msgstr "La instrucción BEGIN correspondiente no tiene prefijo"

#. TRANSLATORS: Note: In English you talk about the *units* of a single
#. measurement, but the correct term in other languages may be singular.
#: ../src/commands.c:340
#: n:37
#, c-format
msgid "Invalid units “%s” for quantity"
msgstr "Unidades “%s” inválidas para cantidad"

#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all
#. errors there take a filename parameter - we don’t really want it here,
#. so lose it with "%.0s" (which should display 0 characters from the
#. filename) FIXME: sort out this
#: ../src/img_hosted.c:35
#: n:38
msgid "Out of memory %.0s"
msgstr "Memória insuficiente %.0s"

#: ../src/commands.c:403
#: n:39
#, c-format
msgid "Unknown instrument “%s”"
msgstr "Instrumento “%s” desconocido"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
#. translate
#: ../src/commands.c:1446
#: n:40
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "El factor de escala debe ser 1.0 para el comando DECLINATION"

#. TRANSLATORS: If the scale factor for an instrument is zero, then any
#. reading would be mapped to zero, which doesn't make sense.
#: ../src/commands.c:1452
#: n:391
msgid "Scale factor must be non-zero"
msgstr "El factor de escala debe de ser diferente de cero"

#: ../src/commands.c:1497
#: n:41
#, c-format
msgid "Unknown setting “%s”"
msgstr "Configuración “%s” desconocida"

#: ../src/commands.c:448
#: n:42
#, c-format
msgid "Unknown character class “%s”"
msgstr "Clase de carácter desconocida “%s”"

#: ../src/extend.c:604
#: ../src/netskel.c:90
#: n:43
msgid "No survey data"
msgstr "Ningún dato de topografia"

#: ../src/filename.c:52
#: ../src/img_hosted.c:36
#: n:44
#, c-format
msgid "Filename “%s” refers to directory"
msgstr "Nombre de archivo “%s” referido a un directorio"

#: ../src/netartic.c:384
#: n:45
msgid "Survey not all connected to fixed stations"
msgstr "La topografia no está completamente conectada a estaciones fijas"

#: ../src/commands.c:844
#: ../src/datain.c:679
#: n:46
msgid "Station already fixed or equated to a fixed point"
msgstr "Estación ya fijada o igualada a un punto fijado"

#: ../src/cavern.c:298
#: ../src/filename.c:55
#: ../src/img_hosted.c:37
#: n:47
#, c-format
msgid "Failed to open output file “%s”"
msgstr "No se pudo abrir el archivo de salida “%s”"

#: ../src/commands.c:1552
#: n:48
msgid "Standard deviation must be positive"
msgstr "La desviación estándard tiene que ser positiva"

#. TRANSLATORS: as in: Usage: cavern …
#: ../src/cmdline.c:168
#: n:49
msgid "Usage"
msgstr "Utilización"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#.
#. %s is replaced by the name of the station.
#: ../src/netbits.c:333
#: n:50
#, c-format
msgid "Survey leg with same station (“%s”) at both ends - typing error?"
msgstr "Tirada con la misma estación en ambas puntas (“%s”) - error de transcripción?"

#. TRANSLATORS: Degrees are the angular measurement where there are
#. 360 in a full circle.
#: ../src/datain.c:965
#: ../src/datain.c:973
#: ../src/datain.c:985
#: n:51
msgid "Clino reading over 90 degrees (absolute value)"
msgstr "Lectura del clino superior a 90 grados (valor absoluto)"

#: ../src/netbits.c:422
#: n:52
#, c-format
msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
msgstr "Tentativa de igualar dos estaciones fijadas en coordenadas diferentes: “%s” y “%s”"

#. TRANSLATORS: "equal" as in:
#.
#. *fix a 1 2 3
#. *fix b 1 2 3
#. *equate a b
#: ../src/netbits.c:433
#: n:53
#, c-format
msgid "Equating two equal fixed points: “%s” and “%s”"
msgstr "Igualando dos estaciones fijadas en las mismas coordenadas: “%s” y “%s”"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:739
#: n:54
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "Comando FIX sin coordenades - se fijará en (0,0,0)"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:848
#: ../src/datain.c:681
#: n:55
msgid "Station already fixed at the same coordinates"
msgstr "Estación fijada previamente en las mismas coordenadas"

#: n:56
msgid "More than one FIX command with no coordinates"
msgstr "Más de un comando FIX sin coordenadas"

#. TRANSLATORS: Emitted after second and subsequent "FIX command with
#. no coordinates - fixing at (0,0,0)" warnings.
#: ../src/commands.c:747
#: n:441
#, c-format, fuzzy
msgid "Already had FIX command with no coordinates for station “%s”"
msgstr "Más de un comando FIX sin coordenadas: “%s”"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
#. <SURVEY>, so this would generate this error:
#.
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:2062
#: n:57
msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
msgstr "*EXPORT debe seguir inmediatamente a “*BEGIN <TOPOGRAFÍA>”"

#: ../src/readval.c:512
#: n:58
msgid "Invalid year (< 1900 or > 2078)"
msgstr "Año inválido (< 1900 ó > 2078)"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20
#. degrees
#: ../src/datain.c:863
#: ../src/datain.c:872
#: n:59
msgid "Suspicious compass reading"
msgstr "Lectura de brújula sospechosa"

#: ../src/datain.c:1502
#: n:60
msgid "Negative tape reading"
msgstr "Lectura de longitud negativa"

#: ../src/commands.c:734
#: n:61
msgid "Same station fixed twice with no coordinates"
msgstr "La misma estación se fijó dos veces sin coordenadas"

#. TRANSLATORS: This means that the data fed in said this.
#.
#. It could be a gross error (e.g. the decimal point is missing from the
#. depth gauge reading) or it could just be due to random error on a near
#. vertical leg
#: ../src/datain.c:1201
#: n:62
msgid "Tape reading is less than change in depth"
msgstr "Lectura de longitud inferior a la diferencia de profundidades"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. neither style nor reading is a keyword in the program This error
#. complains about a depth gauge reading in normal style, for example
#: ../src/commands.c:1168
#: n:63
#, c-format
msgid "Reading “%s” not allowed in data style “%s”"
msgstr "Campo “%s” no permitido en este estilo de datos “%s”"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1353
#: n:64
#, c-format
msgid "Too few readings for data style “%s”"
msgstr "Faltan campos para el estilo de datos “%s”"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#: ../src/commands.c:1128
#: n:65
#, c-format
msgid "Data style “%s” unknown"
msgstr "Estilo de datos “%s” desconocido"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#.
#. Exporting a station twice gives this error:
#.
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:998
#: n:66
#, c-format
msgid "Station “%s” already exported"
msgstr "La estación “%s” ya ha sido exportada anteriormente"

#. TRANSLATORS: complains about a situation like trying to define
#. two from stations per leg
#: ../src/commands.c:1194
#: n:67
#, c-format
msgid "Duplicate reading “%s”"
msgstr "Campo duplicado “%s”"

#: ../src/commands.c:875
#: n:68
#, c-format
msgid "FLAG “%s” unknown"
msgstr "FLAG “%s” desconocido"

#: ../src/readval.c:469
#: n:69
msgid "Missing \""
msgstr "Falta \""

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/listpos.c:119
#: n:70
#, fuzzy, c-format
msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
msgstr "La estacioón “%s” solo ha sido usada una vez, con un prefijo explícito - error tipográfico?"

#. TRANSLATORS: Here "station" is a survey station, not a train
#. station.
#: ../src/netartic.c:396
#: n:71
msgid "The following survey stations are not attached to a fixed point:"
msgstr "Las siguientes estaciones no están conectadas a un punto fijo:"

#: ../src/netskel.c:135
#: n:72
#, c-format
msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
msgstr "La topografia no tiene puntos fijados. De todos modos he fijado %s en (0,0,0)"

#. TRANSLATORS: fixed survey station that is not part of any survey
#: ../src/netskel.c:958
#: n:73
#, c-format
msgid "Unused fixed point “%s”"
msgstr "Punto fijado no utilizado “%s”"

#: ../src/matrix.c:123
#: n:74
msgid "Network solved by reduction - no simultaneous equations to solve."
msgstr "Red resuelta por reducción - ningún sistema de ecuaciones por resolver."

#: ../src/matrix.c:134
#: n:75
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "Resolviendo un sistema de %d ecuaciones"

#: ../src/commands.c:1256
#: n:77
#, c-format
msgid "Reading “%s” duplicates previous reading(s)"
msgstr "El campo “%s” duplica campo(s) precedente(s)"

#: ../src/matrix.c:132
#: n:78
msgid "Solving one equation"
msgstr "Resolviendo una ecuación"

#: ../src/datain.c:936
#: ../src/datain.c:1190
#: ../src/datain.c:1383
#: n:79
msgid "Negative adjusted tape reading"
msgstr "Distancia ajustada negativa"

#: ../src/commands.c:1970
#: ../src/commands.c:1990
#: n:80
msgid "Date is in the future!"
msgstr "La fecha es en el futuro!"

#: ../src/commands.c:1994
#: n:81
msgid "End of date range is before the start"
msgstr "La fecha final es anterior a la incial"

#: ../src/avenprcore.cc:125
#: n:82
#, c-format
msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
msgstr "Parámetros “%s” tienen un valor incorrecto “%s” en el archivo de configuración de la impresora"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at
#. station "entrance.27", but there is no station "entrance.27" in
#. the centre-line.
#: ../src/netskel.c:1046
#: n:83
#, c-format
msgid "Cross section specified at non-existent station “%s”"
msgstr "Se ha especificado una sección transversal en la estación inexistente “%s”"

#. TRANSLATORS: In data with backsights, the user has tried to give a
#. plumb for the foresight and a clino reading for the backsight, or
#. something similar.
#: ../src/datain.c:1002
#: ../src/datain.c:1026
#: n:84
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "Las lecturas de CLINO y BACKCLINO deben de ser del mismo tipo"

#: ../src/avenprcore.cc:120
#: n:85
#, c-format
msgid "Parameter “%s” missing in printer configuration file"
msgstr "Parámetros “%s” faltan en el archivo de configuración de la impresora"

#: ../src/readval.c:520
#: n:86
msgid "Invalid month"
msgstr "Mes inválido"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/readval.c:529
#: n:87
msgid "Invalid day of the month"
msgstr "El dia del mes es inválido"

#: ../src/cavern.c:247
#: n:88
#, c-format
msgid "3d file format versions %d to %d supported"
msgstr ""

#, c-format
#~ msgid "Error in format of font file “%s”"
#~ msgstr "Error en el formato del archivo de fuentes “%s”"

#: ../src/readval.c:200
#: n:89
msgid "Expecting survey name"
msgstr "Esperando un nombre de topografía"

#. TRANSLATORS: Program will exit shortly after printing this
#: ../src/message.c:227
#: n:90
msgid "Abnormal termination"
msgstr "Finalización anormal"

#: ../src/message.c:228
#: n:91
msgid "Arithmetic error"
msgstr "Error aritmético"

#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
#. opcodes -- corrupted program?
#: ../src/message.c:231
#: n:92
msgid "Illegal instruction"
msgstr "Instrucción ilegal"

#: ../src/extend.c:553
#: ../src/mainfrm.cc:388
#: ../src/sorterr.c:146
#: n:93
#, c-format
msgid "Couldn’t open file “%s”"
msgstr "No se pudo abrir el archivo “%s”"

#: ../src/printwx.cc:633
#: n:402
#, c-format
msgid "Couldn’t write file “%s”"
msgstr ""

#: ../src/message.c:232
#: n:94
msgid "Bad memory access"
msgstr "Acceso a memoria erróneo"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:467
#: ../src/commands.c:540
#: ../src/commands.c:562
#: ../src/commands.c:1143
#: ../src/commands.c:1480
#: ../src/readval.c:96
#: n:95
msgid "Further uses of this deprecated feature will not be reported"
msgstr "Usos futuros de ésta función obsoleta no serán informados"

#: ../src/message.c:233
#: n:97
msgid "Unknown signal received"
msgstr "Se ha recibido una señal desconocida"

#. TRANSLATORS: Degrees are the angular measurement where there are
#. 360 in a full circle.
#: ../src/datain.c:902
#: n:98
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
msgstr "Las lecturas de COMPASS y BACKCOMPASS difieren de %s grados"

#. TRANSLATORS: Degrees are the angular measurement where
#. there are 360 in a full circle.
#: ../src/datain.c:1078
#: n:99
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
msgstr "Las lecturas de CLINO y BACKCLINO difieren de %s grados"

#: ../src/cad3d.c:661
#: n:100
msgid "do not generate station markers"
msgstr ""

#: ../src/cad3d.c:662
#: n:101
msgid "do not generate station labels"
msgstr ""

#: ../src/cad3d.c:663
#: n:102
msgid "do not generate survey legs"
msgstr ""

#: ../src/cad3d.c:667
#: n:103
msgid "produce an elevation view"
msgstr ""

#: ../src/commands.c:1140
#: n:104
#, c-format
msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
msgstr "“*data %s %c …” obsoleto - usa “*data %s …” en su lugar"

#: ../src/extend.c:506
#: n:105
msgid "Reading in data - please wait…"
msgstr "Leyendo datos, espere por favor…"

#. TRANSLATORS: Perhaps the user tried to load a different type of file as
#. a Survex .3d file, or the .3d file was corrupted.
#: ../src/3dtopos.c:157
#: ../src/3dtopos.c:163
#: ../src/cad3d.c:905
#: ../src/cad3d.c:916
#: ../src/img_hosted.c:40
#: n:106
#, c-format
msgid "Bad 3d image file “%s”"
msgstr "Archivo de imagen 3d “%s” erróneo"

#. TRANSLATORS: This is the date format string used to timestamp .3d
#. files internally.  Probably best to keep it the same for all
#. translations.
#: ../src/img.c:43
#: ../src/mainfrm.cc:1409
#: n:107
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: used a processed survey with no processing date/time info
#: ../src/mainfrm.cc:1402
#: n:108
msgid "Date and time not available."
msgstr "Fecha y hora no disponibles."

#: ../src/img_hosted.c:41
#: n:109
#, c-format
msgid "Error reading from file “%s”"
msgstr "Error al leer el archivo “%s”"

#: ../src/filename.c:79
#: ../src/img_hosted.c:42
#: ../src/mainfrm.cc:346
#: ../src/mainfrm.cc:1917
#: n:110
#, c-format
msgid "Error writing to file “%s”"
msgstr "Error escribiendo en el archivo “%s”"

#: ../src/filename.c:82
#: n:111
msgid "Error writing to file"
msgstr "Error escribiendo en archivo"

#: ../src/sorterr.c:81
#: ../src/sorterr.c:98
#: ../src/sorterr.c:170
#: n:112
msgid "Couldn’t parse .err file"
msgstr "No se ha podido analizar el archivo de errores .err"

#: ../src/cavern.c:390
#: n:113
#, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "Havia %d alerta(s) y %d error(es) - no se generaron archivos de salida."

#: ../src/img_hosted.c:43
#: n:114
#, c-format
msgid "File “%s” has a newer format than this program can understand"
msgstr "El archivo “%s” tiene un formato mas nuevo del que éste programa puede entender"

#: ../src/printwx.cc:979
#: n:115
msgid "North"
msgstr "Norte"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printwx.cc:1006
#: n:116
msgid "Elevation on"
msgstr "Alzado en"

#: ../src/printwx.cc:437
#: n:117
msgid "P&lan view"
msgstr ""

#: ../src/printwx.cc:439
#: n:285
msgid "&Elevation"
msgstr "&Alzado"

#: ../src/gfxcore.cc:806
#: ../src/mainfrm.cc:128
#: n:118
msgid "Elevation"
msgstr "Alzado"

#. TRANSLATORS: Label used for "clino" in Aven when the view is
#. from directly above.
#: ../src/gfxcore.cc:718
#: n:432
msgid "Plan"
msgstr ""

#. TRANSLATORS: Label used for "clino" in Aven when the view is
#. from directly below.
#: ../src/gfxcore.cc:728
#: n:433
msgid "Kiwi Plan"
msgstr ""

#: ../src/cavern.c:352
#: n:120
msgid "Calculating statistics"
msgstr "Calculando estadísticas"

#: ../src/readval.c:483
#: n:121
msgid "Expecting string field"
msgstr "Esperando una cadena de carácteres"

#: ../src/cmdline.c:212
#: n:122
msgid "too few arguments"
msgstr "Faltan argumentos"

#: ../src/cmdline.c:219
#: n:123
msgid "too many arguments"
msgstr "Sobran argumentos"

#: ../src/cmdline.c:178
#: ../src/cmdline.c:181
#: ../src/cmdline.c:185
#: n:124
msgid "FILE"
msgstr "ARCHIVO"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:177
#: n:125
msgid "Removing trailing traverses"
msgstr "Borrando las secuencias terminales"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#: ../src/netskel.c:236
#: n:126
msgid "Concatenating traverses"
msgstr "Conectando secuencias"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#: ../src/netskel.c:434
#: n:127
msgid "Calculating traverses"
msgstr "Calculando secuencias"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:779
#: n:128
msgid "Calculating trailing traverses"
msgstr "Calculando las secuencias terminales"

#: ../src/network.c:82
#: n:129
msgid "Simplifying network"
msgstr "Simplificando la red"

#: ../src/network.c:540
#: n:130
msgid "Calculating network"
msgstr "Calculando la red"

#: ../src/datain.c:1492
#: n:131
#, c-format
msgid "Found “%s”, expecting “F” or “B”"
msgstr "Encontrado “%s”, esperando “F” o “B”"

#: ../src/cavern.c:451
#: n:132
#, c-format
msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
msgstr "Longitud total de las tiradas de topografia = %7.2fm (%7.2fm corregido)"

#: ../src/cavern.c:454
#: n:133
#, c-format
msgid "Total plan length of survey legs = %7.2fm"
msgstr "Longitud total en proyección horizontal = %7.2fm"

#: ../src/cavern.c:457
#: n:134
#, c-format
msgid "Total vertical length of survey legs = %7.2fm"
msgstr "Longitud vertical total de las tiradas de topografia = %7.2fm"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:464
#: n:135
#, c-format
msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Desnivel total = %4.2fm (desde %s en %4.2fm a %s en %4.2fm)"

#. TRANSLATORS: c.f. previous message
#: ../src/cavern.c:466
#: n:136
#, c-format
msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Extensión Norte-Sur = %4.2fm (desde %s en %4.2fm a %s en %4.2fm)"

#. TRANSLATORS: c.f. previous two messages
#: ../src/cavern.c:468
#: n:137
#, c-format
msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Extensión Este-Oeste = %4.2fm (desde %s en %4.2fm a %s en %4.2fm)"

#: ../src/cavern.c:436
#: n:138
msgid "There is 1 loop."
msgstr "Hay 1 bucle."

#: ../src/cavern.c:438
#: n:139
#, c-format
msgid "There are %ld loops."
msgstr "Hay %ld bucles."

#: ../src/cavern.c:374
#: n:140
#, c-format
msgid "CPU time used %5.2fs"
msgstr "Tiempo de CPU utilizado %5.2fs"

#: ../src/cavern.c:377
#: n:141
#, c-format
msgid "Time used %5.2fs"
msgstr "Tiempo utilizado %5.2fs"

#: ../src/cavern.c:379
#: n:142
msgid "Time used unavailable"
msgstr "Tiempo utilizado no disponible"

#: ../src/cavern.c:382
#: n:143
#, c-format
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "Tiempo utilizado %5.2fs (%5.2fs tiempo CPU)"

#: ../src/cavern.c:386
#: n:144
msgid "Done."
msgstr "Hecho."

#: ../src/netskel.c:744
#: n:145
#, c-format
msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
msgstr "Longitud original %6.2fm (%3d tiradas), reducidos %6.2fm (%5.2fm/tirada). "

#: ../src/netskel.c:747
#: n:146
#, c-format
msgid "Error %6.2f%%"
msgstr "Error %6.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
#. traverse has zero length, so error per metre is meaningless.
#.
#. There should be 4 spaces between "Error" and "N/A" so that it lines
#. up with the numbers in the message above.
#: ../src/netskel.c:754
#: n:147
msgid "Error    N/A"
msgstr "Error    N/A"

#: ../src/cad3d.c:664
#: n:148
#, c-format
msgid "generate grid (default %sm)"
msgstr ""

#: ../src/cad3d.c:665
#: n:149
#, c-format
msgid "station labels text height (default %s)"
msgstr ""

#: ../src/cad3d.c:666
#: n:152
#, c-format
msgid "station marker size (default %s)"
msgstr "tamaño de la marca de la estación (%s por defecto)"

#: ../src/cad3d.c:668
#: n:155
#, c-format
msgid "factor to scale down by (default %s)"
msgstr ""

#: ../src/cad3d.c:669
#: n:156
msgid "produce DXF output"
msgstr ""

#: ../src/cad3d.c:670
#: n:158
msgid "produce Skencil output"
msgstr ""

#: ../src/cad3d.c:671
#: n:159
msgid "produce Compass PLT output for Carto"
msgstr ""

#: ../src/cad3d.c:672
#: n:160
msgid "produce SVG output"
msgstr ""

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:138
#: n:150
msgid "display this help and exit"
msgstr "muestra esta ayuda y sale"

#. TRANSLATORS: description of --verbose option
#: ../src/cmdline.c:141
#: n:151
msgid "output version information and exit"
msgstr "muestra información de la versión y sale"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
#: ../src/cmdline.c:170
#: n:153
msgid "OPTION"
msgstr "OPCIÓN"

#: ../src/mainfrm.cc:132
#: ../src/printwx.cc:385
#: ../src/printwx.cc:1051
#: ../src/printwx.cc:1100
#: n:154
msgid "Scale"
msgstr "Escala"

#: ../src/cmdline.c:194
#: n:157
#, c-format
msgid "Try “%s --help” for more information.\n"
msgstr "Prueba “%s --help” para más información.\n"

#: ../src/avenprcore.cc:269
#: n:166
#, c-format
msgid "Page %d of %d"
msgstr "Página %d de %d"

#: ../src/avenprcore.cc:272
#: ../src/printwx.cc:1533
#: n:167
#, c-format
msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
msgstr "Topo “%s”   Página %d (de %d)   Procesada en %s"

#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
#. something like "123°".  The bearing is up the page.
#: ../src/printwx.cc:987
#: n:168
#, c-format
msgid "Plan view, %s up page"
msgstr ""

#. TRANSLATORS: This is used on printouts of elevations, with %s
#. replaced by something like "123°".  The bearing is the direction
#. we’re looking.
#: ../src/printwx.cc:1025
#: n:169
#, c-format
msgid "Elevation facing %s"
msgstr ""

#. TRANSLATORS: This is used on printouts of tilted elevations, with
#. the first %s replaced by something like "123°", and the second by
#. something like "-45°".  The bearing is the direction we’re
#. looking.
#: ../src/printwx.cc:1034
#: n:284
#, c-format
msgid "Elevation facing %s, tilted %s"
msgstr ""

#. TRANSLATORS: This is used on printouts of extended elevations.
#: ../src/printwx.cc:1043
#: n:191
msgid "Extended elevation"
msgstr "Alzado desarrolado"

#: ../src/cavern.c:422
#: n:172
msgid "Survey contains 1 survey station,"
msgstr "La topografia contiene 1 estación,"

#: ../src/cavern.c:424
#: n:173
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "La topografia contiene %ld estaciones,"

#: ../src/cavern.c:428
#: n:174
msgid " joined by 1 leg."
msgstr " unidas por 1 tirada."

#: ../src/cavern.c:430
#: n:175
#, c-format
msgid " joined by %ld legs."
msgstr " unidas por %ld tiradas."

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:182
#: n:176
msgid "node"
msgstr "nodo"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:184
#: n:177
msgid "nodes"
msgstr "nodos"

#. TRANSLATORS: "Connected component" in the graph theory sense - it
#. means there are %ld bits of survey with no connections between them.
#. This message is only used if there are more than 1.
#: ../src/cavern.c:447
#: n:178
#, c-format
msgid "Survey has %ld connected components."
msgstr "La topografia contiene %ld componentes conectados."

#. TRANSLATORS: Label for button in aven’s cavern log window which
#. causes the survey data to be reprocessed.
#: ../src/cavernlog.cc:400
#: ../src/cavernlog.cc:411
#: n:184
msgid "Reprocess"
msgstr ""

#: ../src/cmdline.c:242
#: ../src/cmdline.c:261
#: n:185
#, c-format
msgid "numeric argument “%s” out of range"
msgstr "argumento numérico “%s” fuera de rango"

#: ../src/cmdline.c:244
#: n:186
#, c-format
msgid "argument “%s” not an integer"
msgstr "El argumento “%s” no es un entero"

#: ../src/cmdline.c:263
#: n:187
#, c-format
msgid "argument “%s” not a number"
msgstr "El argumento “%s” no es un número"

#: ../src/commands.c:890
#: n:188
msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "Esperando “DUPLICATE”, “SPLAY”, o “SURFACE”"

#: ../src/commands.c:893
#: n:189
msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "Esperando “NOT”, “DUPLICATE”, “SPLAY”, o “SURFACE”"

#: ../src/listpos.c:82
#: n:190
#, c-format
msgid "Station “%s” referred to by *entrance or *export but never used"
msgstr "La estación “%s” ha sido referenciada por *entrance o *export pero no se ha usado nunca"

#: ../src/commands.c:646
#: n:192
msgid "No matching BEGIN"
msgstr "Falta el BEGIN correspondiente"

#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
#. same <survey> if it’s given at all
#: ../src/commands.c:674
#: n:193
#, fuzzy
msgid "Survey name doesn’t match BEGIN"
msgstr "El prefijo no se corresponde con el de BEGIN"

#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
#. END command omits it, e.g.:
#.
#. *begin entrance
#. 1 2 10.00 178 -01
#. *end     <--[Message given here]
#: ../src/commands.c:683
#: n:194
#, fuzzy
msgid "Survey name omitted from END"
msgstr "Prefijo omitido en END"

#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the “,”s
#. (or at least the columns) are in the same place
#: ../src/3dtopos.c:112
#: n:195
msgid "( Easting, Northing, Altitude )"
msgstr "( Este X , Norte Y , Altitud Z)"

#. TRANSLATORS: bpp is "Bits Per Pixel"
#: ../src/aboutdlg.cc:181
#: n:196
#, c-format
msgid "Display Depth: %d bpp"
msgstr ""

#. TRANSLATORS: appended to previous message if the display is colour
#: ../src/aboutdlg.cc:183
#: n:197
msgid " (colour)"
msgstr " (color)"

#: ../src/readval.c:508
#: ../src/readval.c:518
#: ../src/readval.c:526
#: n:198
#, c-format
msgid "Expecting date, found “%s”"
msgstr "Esperando dato, encontrado “%s”"

#. TRANSLATORS: --help output for --survey option.
#.
#. "this" has been added to English translation
#: ../src/3dtopos.c:50
#: ../src/aven.cc:66
#: ../src/cad3d.c:660
#: ../src/diffpos.c:57
#: ../src/dump3d.c:49
#: ../src/extend.c:458
#: n:199
msgid "only load the sub-survey with this prefix"
msgstr "solo carga la sub-topografía con prefijo"

#. TRANSLATORS: --help output for aven --print option
#: ../src/aven.cc:68
#: n:119
msgid "print and exit (requires a 3d file)"
msgstr ""

#. TRANSLATORS: --help output for cavern --percentage option
#: ../src/cavern.c:125
#: n:161
msgid "display percentage progress"
msgstr ""

#. TRANSLATORS: --help output for cavern --output option
#: ../src/cavern.c:127
#: n:162
msgid "set location for output files"
msgstr ""

#. TRANSLATORS: --help output for cavern --quiet option
#: ../src/cavern.c:129
#: n:163
msgid "only show brief summary (-qq for errors only)"
msgstr ""

#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
#: ../src/cavern.c:131
#: n:164
msgid "do not create .err file"
msgstr ""

#. TRANSLATORS: --help output for cavern --warnings-are-errors option
#: ../src/cavern.c:133
#: n:165
msgid "turn warnings into errors"
msgstr ""

#. TRANSLATORS: --help output for cavern --log option
#: ../src/cavern.c:135
#: n:170
msgid "log output to .log file"
msgstr ""

#. TRANSLATORS: --help output for cavern --3d-version option
#: ../src/cavern.c:137
#: n:171
msgid "specify the 3d file format version to output"
msgstr ""

#. TRANSLATORS: --help output for sorterr --horizontal option
#: ../src/sorterr.c:53
#: n:179
msgid "sort by horizontal error factor"
msgstr ""

#. TRANSLATORS: --help output for sorterr --vertical option
#: ../src/sorterr.c:55
#: n:180
msgid "sort by vertical error factor"
msgstr ""

#. TRANSLATORS: --help output for sorterr --percentage option
#: ../src/sorterr.c:57
#: n:181
msgid "sort by percentage error"
msgstr ""

#. TRANSLATORS: --help output for sorterr --per-leg option
#: ../src/sorterr.c:59
#: n:182
msgid "sort by error per leg"
msgstr ""

#. TRANSLATORS: --help output for sorterr --replace option
#: ../src/sorterr.c:61
#: n:183
msgid "replace .err file with resorted version"
msgstr ""

#. TRANSLATORS: --help output for dump3d --rewind option
#: ../src/dump3d.c:51
#: n:204
msgid "rewind file and read it a second time"
msgstr ""

#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
#. meaningless to say your tape is marked in "0 feet" (but you might
#. measure distance by counting knots on a diving line, and tie them
#. every "2 feet").
#: ../src/commands.c:1400
#: n:200
msgid "*UNITS factor must be non-zero"
msgstr "El factor de *UNITS debe de ser diferente de cero"

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:765
#: n:201
msgid "&Screenshot…"
msgstr "&Captura de pantalla…"

#: ../src/mainfrm.cc:1419
#: n:202
#, c-format
msgid "No survey data in 3d file “%s”"
msgstr "No hay datos topográficos en el archivo 3d “%s”"

#: ../src/gfxcore.cc:708
#: n:203
msgid "Facing"
msgstr "Dirección"

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:70
#: n:205
#, c-format
msgid "About %s"
msgstr "Acerca de %s"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. File->Open dialog:
#: ../src/mainfrm.cc:1889
#: n:206
#, fuzzy
msgid "Select a survey file to view"
msgstr "Selecciona un archivo 3d para visualizar"

#: ../src/mainfrm.cc:1868
#: n:207
msgid "Survex 3d files"
msgstr "Archivos Survex 3d"

#: ../src/mainfrm.cc:1881
#: ../src/mainfrm.cc:2320
#: ../src/printwx.cc:613
#: n:208
msgid "All files"
msgstr "Todos los archivos"

#. TRANSLATORS: Here "survey" is a "cave map" rather than
#. list of questions - it should be translated to the
#. terminology that cavers using the language would use.
#: ../src/mainfrm.cc:1867
#: n:229
msgid "All survey files"
msgstr ""

#: ../src/mainfrm.cc:1869
#: n:329
msgid "Survex svx files"
msgstr "Archivos Survex svx"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so probably shouldn’t be translated
#: ../src/mainfrm.cc:1877
#: n:330
msgid "Compass DAT and MAK files"
msgstr ""

#: ../src/printwx.cc:271
#: n:411
msgid "DXF files"
msgstr "Archivos DXF"

#: ../src/printwx.cc:272
#: n:412
msgid "EPS files"
msgstr "Archivos EPS"

#: ../src/printwx.cc:273
#: n:413
msgid "GPX files"
msgstr "Archivos GPX"

#: ../src/printwx.cc:274
#: n:414
msgid "HPGL for plotters"
msgstr ""

#: ../src/printwx.cc:275
#: n:415
msgid "Compass PLT for use with Carto"
msgstr ""

#: ../src/printwx.cc:276
#: n:416
msgid "Skencil files"
msgstr "Archivos Skencil"

#: ../src/printwx.cc:277
#: n:417
msgid "SVG files"
msgstr "Archivos SVG"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. This string is used in the about box (summarising the purpose of aven).
#: ../src/aboutdlg.cc:94
#: n:209
msgid "Survey visualisation tool"
msgstr "Herramienta para visualizar topografias"

#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
#. accelerator key.  The accelerators must be different within this group
#: ../src/mainfrm.cc:924
#: n:210
msgid "&File"
msgstr "&Archivo"

#: ../src/mainfrm.cc:925
#: n:211
msgid "&Rotation"
msgstr "&Rotación"

#: ../src/mainfrm.cc:926
#: n:212
msgid "&Orientation"
msgstr "&Orientación"

#: ../src/mainfrm.cc:927
#: n:213
msgid "&View"
msgstr "&Vista"

#: ../src/mainfrm.cc:929
#: n:214
msgid "&Controls"
msgstr "&Controles"

#: ../src/mainfrm.cc:938
#: n:215
msgid "&Help"
msgstr "A&yuda"

#: ../src/mainfrm.cc:931
#: n:216
msgid "&Presentation"
msgstr "&Presentación"

#: ../src/aboutdlg.cc:105
#: n:219
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "Este programa es software libre. Puede redistribuirlo y/o modificarlo bajo los términos de la Licencia Pública General de GNU según es publicada por la Free Software Foundation, bien de la versió 2 de dicha Licencia o bien (según su elección) de cualquier versión posterior."

#. TRANSLATORS: Part of 3dtopos --help
#: ../src/3dtopos.c:86
#: n:217
msgid "3D_FILE [POS_FILE]"
msgstr "ARCHIVO_3D [ARCHIVO_POS]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:265
#: n:218
msgid "FILE1 FILE2 [THRESHOLD]"
msgstr "ARCHIVO1 ARCHIVO2 [LÍMITE]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:267
#: n:255
#, fuzzy, c-format
msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
msgstr "ARCHIVO1 and ARCHIVO2 can be .pos or .3d files\nLÍMITE is the max. ignorable change along any axis in metres (default %s)"

#. TRANSLATORS: Part of extend --help
#: ../src/extend.c:480
#: n:267
msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
msgstr ""

#. TRANSLATORS: Part of sorterr --help
#: ../src/sorterr.c:127
#: n:268
msgid "ERR_FILE [HOW_MANY]"
msgstr ""

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. Part of aven --help
#: ../src/aven.cc:115
#: ../src/aven.cc:139
#: n:269
msgid "[SURVEY_FILE]"
msgstr ""

#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
#. accelerator key.
#.
#. The string "\t" separates the menu text and any accelerator key.
#.
#. "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:758
#: n:220
msgid "&Open…\tCtrl+O"
msgstr "&Abrir…\tCtrl+O"

#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
#. are surveys without date information.
#: ../src/gfxcore.cc:1051
#: n:221
msgid "Undated"
msgstr "Sin fecha"

#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
#. which aren’t part of a loop and so have no error information.
#: ../src/gfxcore.cc:1075
#: n:290
msgid "Not in loop"
msgstr ""

#. TRANSLATORS: error from:
#.
#. *data normal newline from to tape compass clino
#: ../src/commands.c:1244
#: n:222
msgid "NEWLINE can’t be the first reading"
msgstr "NEWLINE no puede ser el primer campo"

#. TRANSLATORS: error from:
#.
#. *data normal from to tape compass clino newline
#: ../src/commands.c:1282
#: n:223
msgid "NEWLINE can’t be the last reading"
msgstr "NEWLINE no puede ser el último campo"

#. TRANSLATORS: Error given by something like:
#.
#. *data normal station tape compass clino
#.
#. ("station" signifies interleaved data).
#: ../src/commands.c:1305
#: n:224
msgid "Interleaved readings, but no NEWLINE"
msgstr "Campos en más de una linea, pero sin NEWLINE"

#. TRANSLATORS: caused by e.g.
#.
#. *data diving station newline depth tape compass
#.
#. ("depth" needs to occur before "newline").
#: ../src/commands.c:1181
#: n:225
#, c-format
msgid "Reading “%s” must occur before NEWLINE"
msgstr "El campo “%s” tiene que preceder a NEWLINE"

#. TRANSLATORS: e.g.
#.
#. *data normal from to tape newline compass clino
#: ../src/commands.c:1234
#: n:226
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "NEWLINE solo puede ser precedido por STATION, DEPTH, y COUNT"

#: ../src/commands.c:1434
#: n:227
msgid "Can’t calibrate angular and length quantities together"
msgstr "No se pueden calibrar cantidades angulares y de longitud juntas"

#: ../src/commands.c:589
#: n:397
msgid "Bad *alias command"
msgstr ""

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
#. height values).
#~ msgid "Select a terrain file to view"
#~ msgstr "Selecciona un archivo de terreno para ver"

#~ msgid "Terrain files"
#~ msgstr "Archivos de terreno"

#. TRANSLATORS: %s will be replaced by the application name ("Aven"
#. currently)
#: ../src/log.cc:32
#: n:228
#, c-format
msgid "%s Error Log"
msgstr ""

#. TRANSLATORS: The text on the action button in the "Export" settings
#. dialog
#: ../src/printwx.cc:571
#: n:230
msgid "&Export…"
msgstr "&Exportar…"

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
#. this group.  Tickable menu item which toggles auto rotation
#: ../src/mainfrm.cc:780
#: n:231
msgid "Au&to-Rotate\tSpace"
msgstr "&Auto-Rotar\tSpace"

#: ../src/mainfrm.cc:782
#: n:232
msgid "Speed &Up"
msgstr "A&ccelera la rotación"

#: ../src/mainfrm.cc:783
#: n:233
msgid "Slow &Down"
msgstr "&Ralentiza la rotación"

#: ../src/mainfrm.cc:785
#: n:234
msgid "&Reverse Direction"
msgstr "&Invierte el sentido"

#: ../src/mainfrm.cc:787
#: n:235
msgid "Step Once &Anticlockwise"
msgstr "Un paso en el senido a&ntihorario"

#: ../src/mainfrm.cc:788
#: n:236
msgid "Step Once &Clockwise"
msgstr "Un paso en el senido &horario"

#. TRANSLATORS: View *looking* North
#: ../src/gfxcore.cc:3204
#: ../src/mainfrm.cc:791
#: n:240
msgid "View &North"
msgstr "Vista hacia el &Norte"

#. TRANSLATORS: View *looking* East
#: ../src/gfxcore.cc:3206
#: ../src/mainfrm.cc:792
#: n:241
msgid "View &East"
msgstr "Vista hacia el &Este"

#. TRANSLATORS: View *looking* South
#: ../src/gfxcore.cc:3208
#: ../src/mainfrm.cc:793
#: n:242
msgid "View &South"
msgstr "Vista hacia el &Sur"

#. TRANSLATORS: View *looking* West
#: ../src/gfxcore.cc:3210
#: ../src/mainfrm.cc:794
#: n:243
msgid "View &West"
msgstr "Vista hacia el &Oeste"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:799
#: n:244
msgid "Shift Survey &Left"
msgstr "Mueve la topografia hacia la iz&quierda"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:803
#: n:245
msgid "Shift Survey &Right"
msgstr "Mueve la topografia hacia la &Derecha"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:807
#: n:246
msgid "Shift Survey &Up"
msgstr "Mueve la topografia hacia Arr&iba"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:811
#: n:247
msgid "Shift Survey &Down"
msgstr "Mueve la topografia hacia A&bajo"

#: ../src/gfxcore.cc:3224
#: ../src/mainfrm.cc:813
#: n:248
msgid "&Plan View"
msgstr "&Planta"

#: ../src/gfxcore.cc:3225
#: ../src/mainfrm.cc:814
#: n:249
msgid "Ele&vation"
msgstr "Al&zado"

#: ../src/mainfrm.cc:816
#: n:250
msgid "&Higher Viewpoint"
msgstr "Punto de vista más A&lto"

#: ../src/mainfrm.cc:817
#: n:251
msgid "L&ower Viewpoint"
msgstr "Punto de vista más Ba&jo"

#: ../src/mainfrm.cc:820
#: n:252
msgid "&Zoom In\t]"
msgstr "&Ampliar\t]"

#: ../src/mainfrm.cc:821
#: n:253
msgid "Zoo&m Out\t["
msgstr "&Reducir\t["

#: ../src/mainfrm.cc:823
#: n:254
msgid "Restore De&fault View"
msgstr "Restaurar la &vista predeterminada"

#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
#. the "what to print/export" dialog.
#: ../src/printwx.cc:349
#: n:283
msgid "View"
msgstr "Vista"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey
#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
#. "Elements" isn’t a good name for this but nothing better has yet come to
#. mind!
#: ../src/printwx.cc:354
#: n:256
msgid "Elements"
msgstr "Elementos"

#: ../src/printwx.cc:409
#: ../src/printwx.cc:783
#: n:257
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d páginas (%dx%d)"

#. TRANSLATORS: used in the scale drop down selector in the print
#. dialog the implicit meaning is "choose a suitable scale to fit
#. the plot on a single page", but we need something shorter
#: ../src/printwx.cc:391
#: ../src/printwx.cc:802
#: n:258
msgid "One page"
msgstr "Una página"

#: ../src/mainfrm.cc:124
#: ../src/printwx.cc:422
#: n:259
msgid "Bearing"
msgstr "Azimut"

#: ../src/printwx.cc:461
#: n:260
msgid "Station Names"
msgstr "Nombres de estación"

#: ../src/printwx.cc:457
#: n:261
msgid "Crosses"
msgstr "Cruces"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:447
#: n:262
msgid "Underground Survey Legs"
msgstr "Tiradas Subterráneas"

#: ../src/printwx.cc:477
#: n:393
msgid "Cross-sections"
msgstr "Seccións transversals"

#: ../src/printwx.cc:482
#: n:394
msgid "Walls"
msgstr "Paredes"

#: ../src/printwx.cc:486
#: n:395
msgid "Passages"
msgstr "Galerias"

#: ../src/printwx.cc:490
#: n:421
msgid "Origin in centre"
msgstr ""

#: ../src/printwx.cc:494
#: n:422
msgid "Full coordinates"
msgstr ""

#. TRANSLATORS: Used in the print dialog:
#: ../src/printwx.cc:428
#: n:263
msgid "Tilt angle"
msgstr "Angulo de inclinación"

#. TRANSLATORS: used in the print dialog - controls drawing lines
#. around each page
#: ../src/printwx.cc:502
#: n:264
msgid "Page Borders"
msgstr "Marcos de la página"

#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
#. controls drawing the box at the lower left with survey name, view
#. angles, etc
#: ../src/printwx.cc:513
#: n:265
#, fuzzy
msgid "Legend"
msgstr "Cajetín de información"

#. TRANSLATORS: will be used in the print dialog - check this to print
#. blank pages (otherwise they’ll be skipped to save paper)
#: ../src/printwx.cc:508
#: n:266
msgid "Blank Pages"
msgstr "Páginas en blanco"

#. TRANSLATORS: Items in the "View" menu:
#: ../src/mainfrm.cc:840
#: n:270
msgid "Station &Names\tCtrl+N"
msgstr "&Nombres de estación\tCtrl+N"

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:842
#: n:346
msgid "Passage &Tubes\tCtrl+T"
msgstr "&Galerias Tubulares\tCtrl+T"

#: ../src/mainfrm.cc:843
#: n:271
msgid "&Crosses\tCtrl+X"
msgstr "&Cruces\tCtrl+X"

#: ../src/mainfrm.cc:844
#: n:297
msgid "&Grid\tCtrl+G"
msgstr "Re&jilla\tCtrl+G"

#: ../src/mainfrm.cc:845
#: n:318
msgid "&Bounding Box\tCtrl+B"
msgstr "&Bordes del Cuadro\tCtrl+B"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:849
#: n:272
msgid "&Underground Survey Legs\tCtrl+L"
msgstr "&Tiradas Subterráneas\tCtrl+L"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:852
#: n:291
msgid "&Surface Survey Legs\tCtrl+F"
msgstr "Tiradas de t&opografia de superficie\tCtrl+F"

#: ../src/mainfrm.cc:861
#: n:273
msgid "&Overlapping Names"
msgstr "Nombres &Superpuestos"

#: ../src/gfxcore.cc:3259
#: ../src/mainfrm.cc:862
#: n:292
msgid "Colour by &Depth"
msgstr "Colorear por &Profundidad"

#: ../src/gfxcore.cc:3260
#: ../src/mainfrm.cc:863
#: n:293
msgid "Colour by D&ate"
msgstr "Colorear por &Fecha"

#: ../src/gfxcore.cc:3261
#: ../src/mainfrm.cc:864
#: n:289
msgid "Colour by E&rror"
msgstr "Color por E&rror"

#: ../src/mainfrm.cc:866
#: n:294
msgid "Highlight &Entrances"
msgstr "Marca las &Entradas"

#: ../src/mainfrm.cc:867
#: n:295
msgid "Highlight &Fixed Points"
msgstr "Marca los Puntos f&ijados"

#: ../src/mainfrm.cc:868
#: n:296
msgid "Highlight E&xported Points"
msgstr "M&arca los Puntos Exportados"

#: ../src/printwx.cc:465
#: n:418
msgid "Entrances"
msgstr "Entradas"

#: ../src/printwx.cc:469
#: n:419
msgid "Fixed Points"
msgstr "Puntos fijados"

#: ../src/printwx.cc:473
#: n:420
msgid "Exported Stations"
msgstr "Puntos Exportados"

#: ../src/mainfrm.cc:873
#: n:237
msgid "&Perspective"
msgstr "Perspecti&va"

#: ../src/mainfrm.cc:875
#: n:238
msgid "Textured &Walls"
msgstr "Paredes con te&xtura"

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
#. using that term instead if it gives a better translation which most
#. users will understand.
#: ../src/mainfrm.cc:879
#: n:239
msgid "Fade Distant Ob&jects"
msgstr "&Desvanece los objetos lejanos"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:882
#: n:298
msgid "Smoot&hed Survey Legs"
msgstr "Tiradas S&uavizadas"

#: ../src/mainfrm.cc:888
#: ../src/mainfrm.cc:892
#: n:356
msgid "Full Screen &Mode\tF11"
msgstr "&Modo Pantalla Completa\tF11"

#: ../src/mainfrm.cc:906
#: n:274
msgid "&Compass"
msgstr "&Brújula"

#: ../src/mainfrm.cc:907
#: n:275
msgid "C&linometer"
msgstr "&Clino"

#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/mainfrm.cc:910
#: n:276
msgid "Colour &Key"
msgstr ""

#: ../src/mainfrm.cc:911
#: n:277
msgid "&Scale Bar"
msgstr "Barra de &Escala"

#: ../src/mainfrm.cc:901
#: n:280
msgid "&Reverse Sense\tCtrl+R"
msgstr "&Invierte el sentido\tCtrl+R"

#: ../src/mainfrm.cc:871
#: ../src/mainfrm.cc:903
#: n:281
msgid "&Cancel Measuring Line\tEscape"
msgstr "&Cancela la linea de medida\tEscape"

#: ../src/mainfrm.cc:912
#: n:299
msgid "&Indicators"
msgstr "I&ndicadores"

#: ../src/z_getopt.c:695
#: ../src/z_getopt.c:707
#: n:300
#, c-format
msgid "%s: option “%s” is ambiguous\n"
msgstr "%s: la opción “%s” es ambigua\n"

#: ../src/z_getopt.c:1023
#: ../src/z_getopt.c:1034
#: n:301
#, c-format
msgid "%s: option “-W %s” is ambiguous\n"
msgstr "%s: la opción “-W %s” es ambigua\n"

#: ../src/z_getopt.c:751
#: ../src/z_getopt.c:755
#: n:302
#, c-format
msgid "%s: option “%c%s” doesn’t allow an argument\n"
msgstr "%s: la opción “%c%s” no permite argumento\n"

#: ../src/z_getopt.c:740
#: ../src/z_getopt.c:743
#: n:303
#, c-format
msgid "%s: option “--%s” doesn’t allow an argument\n"
msgstr "%s: la opción “--%s” no permite argumento\n"

#: ../src/z_getopt.c:1058
#: ../src/z_getopt.c:1069
#: n:304
#, c-format
msgid "%s: option “-W %s” doesn’t allow an argument\n"
msgstr "%s: la opción “-W %s” no permite argumento\n"

#: ../src/z_getopt.c:790
#: ../src/z_getopt.c:802
#: ../src/z_getopt.c:1089
#: ../src/z_getopt.c:1101
#: n:305
#, c-format
msgid "%s: option “%s” requires an argument\n"
msgstr "%s: la opción “%s” requiere un argumento\n"

#: ../src/z_getopt.c:960
#: ../src/z_getopt.c:971
#: ../src/z_getopt.c:1154
#: ../src/z_getopt.c:1166
#: n:306
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: la opción requiere un argumento -- %c\n"

#: ../src/z_getopt.c:840
#: ../src/z_getopt.c:843
#: n:307
#, c-format
msgid "%s: unrecognized option “--%s”\n"
msgstr "%s: opción “--%s” desconocida\n"

#: ../src/z_getopt.c:851
#: ../src/z_getopt.c:854
#: n:308
#, c-format
msgid "%s: unrecognized option “%c%s”\n"
msgstr "%s: opción “%c%s” desconocida\n"

#: ../src/z_getopt.c:901
#: ../src/z_getopt.c:904
#: n:309
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: opción no permitida -- %c\n"

#: ../src/z_getopt.c:910
#: ../src/z_getopt.c:913
#: n:310
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: opción inválida -- %c\n"

#: ../src/mainfrm.cc:826
#: n:311
msgid "&New Presentation"
msgstr "&Nueva Presentación"

#: ../src/mainfrm.cc:827
#: n:312
msgid "&Open Presentation…"
msgstr "&Abrir Presentación…"

#: ../src/mainfrm.cc:828
#: n:313
msgid "&Save Presentation"
msgstr "&Guardar la Presentació"

#: ../src/mainfrm.cc:829
#: n:314
msgid "Sa&ve Presentation As…"
msgstr "Guardar la Presentació &Como…"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:832
#: n:315
msgid "&Mark"
msgstr "&Marca"

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:834
#: n:316
msgid "Pla&y"
msgstr "&Reproduce"

#: ../src/mainfrm.cc:835
#: n:317
msgid "&Export as Movie…"
msgstr "&Exporta como Animación…"

#: ../src/mainfrm.cc:2397
#: n:331
msgid "Export Movie"
msgstr ""

#: ../src/mainfrm.cc:333
#: n:319
msgid "Select an output filename"
msgstr "Selecciona un nombre de archivo de salida"

#: ../src/mainfrm.cc:330
#: ../src/mainfrm.cc:2319
#: n:320
msgid "Aven presentations"
msgstr "Presentaciones Aven"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1903
#: n:321
msgid "Save Screenshot"
msgstr "Guardar la captura de pantalla"

#: ../src/mainfrm.cc:2314
#: ../src/mainfrm.cc:2317
#: n:322
msgid "Select a presentation to open"
msgstr "Selecciona una presentación para abrir"

#: ../src/mainfrm.cc:412
#: n:323
#, c-format
msgid "Error in format of presentation file “%s”"
msgstr "Error en el formato del archivo de presentación “%s”"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so probably shouldn’t be translated
#: ../src/mainfrm.cc:1873
#: n:324
msgid "Compass PLT files"
msgstr "Archivos Compass PLT"

#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
#. package, so don’t translate it.
#: ../src/mainfrm.cc:1880
#: n:325
msgid "CMAP XYZ files"
msgstr "Archivos CMAP XYZ"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1966
#: ../src/mainfrm.cc:2291
#: ../src/mainfrm.cc:2308
#: n:326
msgid "Modified Presentation"
msgstr "Presentación Modificada"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1964
#: ../src/mainfrm.cc:2290
#: ../src/mainfrm.cc:2307
#: n:327
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "La presentación actual ha sido modificada. Abandonar los cambios no guardados?"

#: ../src/mainfrm.cc:2608
#: ../src/mainfrm.cc:2619
#: n:328
msgid "No matches were found."
msgstr "Búsqueda infroctuosa."

#~ msgid "Open &Terrain…"
#~ msgstr "Abrir &Terreno…"

#~ msgid "Solid Su&rface"
#~ msgstr "Superficie Sóli&da"

#. TRANSLATORS: number of stations found matching search
#, c-format
#~ msgid "%d found"
#~ msgstr "%d encontradas"

#. TRANSLATORS: "Find stations" button tooltip
#: ../src/mainfrm.cc:989
#: n:332
msgid "Find"
msgstr "Encuentra"

#. TRANSLATORS: "Hide stations" button default tooltip
#: ../src/mainfrm.cc:991
#: ../src/mainfrm.cc:2651
#: n:333
msgid "Hide"
msgstr "Oculta"

#. TRANSLATORS: "Hide stations" button tooltip when stations are found
#: ../src/mainfrm.cc:2612
#: n:334
#, c-format
msgid "Hide %d found stations"
msgstr ""

#: ../src/mainfrm.cc:213
#: ../src/mainfrm.cc:2049
#: ../src/mainfrm.cc:2132
#: ../src/mainfrm.cc:2185
#: n:335
msgid "Altitude"
msgstr "Altitud"

#. TRANSLATORS: error if you try to drag multiple files to the aven
#. window
#: ../src/mainfrm.cc:690
#: n:336
msgid "You may only view one 3d file at a time."
msgstr "Solo se puede visualizar un archivo 3d a la vez."

#: ../src/mainfrm.cc:913
#: n:337
msgid "&Side Panel"
msgstr "&Panel Lateral"

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
#. Easting)
#: ../src/mainfrm.cc:2047
#: ../src/mainfrm.cc:2069
#: ../src/mainfrm.cc:2071
#: ../src/mainfrm.cc:2184
#: n:338
msgid "%.2f E, %.2f N"
msgstr "%.2f E, %.2f N"

#. TRANSLATORS: Used in Aven:
#. From <stationname>
#. H: 123.45m V: 234.56m
#. Dist: 456.78m  Brg: 200
#: ../src/mainfrm.cc:2090
#: ../src/mainfrm.cc:2142
#: ../src/mainfrm.cc:2205
#: n:339
#, c-format
msgid "From %s"
msgstr "Desde %s"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:2218
#: n:340
#, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "H %.2f%s, V %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
#. in Compass bearing)
#: ../src/mainfrm.cc:2230
#: n:341
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
msgstr "%s: %s, Dist %.2f%s, Azim %03d%s"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/gfxcore.cc:3250
#: ../src/gfxcore.cc:3268
#: ../src/mainfrm.cc:915
#: n:342
msgid "&Metric"
msgstr "&Metrico"

#. TRANSLATORS: tickable menu item in View menu.
#.
#. Degrees are the angular measurement where there are 360 in a full
#. circle.
#: ../src/gfxcore.cc:3215
#: ../src/gfxcore.cc:3233
#: ../src/mainfrm.cc:916
#: n:343
msgid "&Degrees"
msgstr "&Grados"

#. TRANSLATORS: tickable menu item in View menu.
#.
#. Show the tilt of the survey as a percentage gradient (100% = 45
#. degrees = 50 grad).
#: ../src/gfxcore.cc:3238
#: ../src/mainfrm.cc:917
#: n:430
#, fuzzy
msgid "&Percent"
msgstr "P&ercent"

#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
#. used e.g.  "5km".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1148
#: ../src/printwx.cc:1092
#: n:423
msgid "km"
msgstr "km"

#. TRANSLATORS: abbreviation for "metres" (unit of length), used
#. e.g. "10m".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1022
#: ../src/gfxcore.cc:1155
#: ../src/mainfrm.cc:2038
#: ../src/mainfrm.cc:2107
#: ../src/mainfrm.cc:2127
#: ../src/mainfrm.cc:2177
#: ../src/mainfrm.cc:2209
#: ../src/printwx.cc:1094
#: n:424
msgid "m"
msgstr "m"

#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
#. used e.g.  "50cm".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1163
#: ../src/printwx.cc:1097
#: n:425
msgid "cm"
msgstr "cm"

#. TRANSLATORS: abbreviation for "miles" (unit of length,
#. plural), used e.g.  "2 miles".
#.
#. If there should be a space between the number and this,
#. include one in the translation.
#: ../src/gfxcore.cc:1176
#: n:426
msgid " miles"
msgstr " millas"

#. TRANSLATORS: abbreviation for "mile" (unit of length,
#. singular), used e.g.  "1 mile".
#.
#. If there should be a space between the number and this,
#. include one in the translation.
#: ../src/gfxcore.cc:1183
#: n:427
msgid " mile"
msgstr " milla"

#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
#. as "10ft".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1022
#: ../src/gfxcore.cc:1191
#: ../src/mainfrm.cc:2043
#: ../src/mainfrm.cc:2110
#: ../src/mainfrm.cc:2130
#: ../src/mainfrm.cc:2182
#: ../src/mainfrm.cc:2214
#: n:428
msgid "ft"
msgstr "pie"

#. TRANSLATORS: abbreviation for "inches" (unit of length), used
#. e.g. as "6in".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1199
#: n:429
msgid "in"
msgstr "in"

#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
#: ../src/gfxcore.cc:3213
#: n:387
msgid "&Hide Compass"
msgstr ""

#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
#: ../src/gfxcore.cc:3228
#: n:384
msgid "&Hide Clino"
msgstr ""

#. TRANSLATORS: Menu item which turns off the scale bar in aven.
#: ../src/gfxcore.cc:3248
#: n:385
msgid "&Hide scale bar"
msgstr ""

#. TRANSLATORS: Menu item which turns off the colour key.
#. The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/gfxcore.cc:3266
#: n:386
msgid "&Hide colour key"
msgstr ""

#. TRANSLATORS: degree symbol - probably should be translated to
#. itself.
#: ../src/gfxcore.cc:697
#: ../src/gfxcore.cc:772
#: ../src/mainfrm.cc:2094
#: ../src/mainfrm.cc:2222
#: ../src/printwx.cc:983
#: ../src/printwx.cc:1011
#: ../src/printwx.cc:1015
#: ../src/printwx.cc:1019
#: ../src/printwx.cc:1029
#: n:344
msgid "°"
msgstr "°"

#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
#. circle).
#: ../src/gfxcore.cc:702
#: ../src/gfxcore.cc:777
#: n:76
msgid "ᵍ"
msgstr "ᵍ"

#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
#. full circle).  Try to make this as short as sensibly possible.
#.
#. E.g. in Italian and Spanish we use "g.cent." rather than
#. "gradi quattrocentesimali"/"grados centesimales"
#: ../src/mainfrm.cc:2102
#: ../src/mainfrm.cc:2225
#: n:345
msgid "grad"
msgstr "g.cent."

#. TRANSLATORS: symbol for percentage gradient (100% = 45
#. degrees = 50 grad).
#: ../src/gfxcore.cc:763
#: ../src/gfxcore.cc:781
#: n:96
msgid "%"
msgstr "%"

#. TRANSLATORS: used for the percentage gradient on
#. vertical angles.
#: ../src/gfxcore.cc:757
#: n:431
msgid "∞"
msgstr "∞"

#: ../src/mainfrm.cc:896
#: n:347
#~ msgid "&Preferences…"
#~ msgstr "&Preferencias…"

#: n:348
#~ msgid "Draw passage walls"
#~ msgstr "Dibuja las paredes"

#: n:349
#~ msgid "Estimate LRUD readings based on heuristics"
#~ msgstr "Estimación heurística de los datos LRUD"

#: n:350
#~ msgid "Mark survey stations with crosses"
#~ msgstr "Marcar las estaciones topográficas con cruces"

#: n:351
#~ msgid "Highlight stations marked as entrances"
#~ msgstr "Destacar las estaciones marcadas como entradas"

#: n:352
#~ msgid "Highlight stations marked as fixed points"
#~ msgstr "Destacar las estaciones marcadas como puntos fijos"

#: n:353
#~ msgid "Highlight stations which are exported"
#~ msgstr "Destacar las estaciones exportadas"

#: n:354
#~ msgid "Mark survey stations with their names"
#~ msgstr "Marcar las estaciones topográficas con sus nombres"

#: n:355
#~ msgid "Allow names to overlap on the display (faster)"
#~ msgstr "Permitir que los nombres se sobrepongan (más rápido)"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:357
#~ msgid "Display underground survey legs"
#~ msgstr "Muestra las tiradas subterráneas"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:358
#~ msgid "Display surface survey legs"
#~ msgstr "Muestra las tiradas de superficie"

#: n:359
#~ msgid "Colour surface surveys by depth"
#~ msgstr "Colorea las tiradas de superficie según profundidad"

#: n:360
#~ msgid "Draw surface legs with dashed lines"
#~ msgstr "Dibuja las tiradas de superficie con líneas punteadas"

#: n:361
#~ msgid "Draw a grid"
#~ msgstr "Dibuja una cuadrícula"

#: n:362
#~ msgid "metric units"
#~ msgstr "unidades en sistema métrico"

#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
#. the USA (rather confusingly now that England has largely gone metric!)
#: n:363
#~ msgid "imperial units"
#~ msgstr "unidades en sistema imperial"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: n:364
#~ msgid "degrees (°)"
#~ msgstr "grados (°)"

#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
#. full circle.
#: n:365
#~ msgid "grads"
#~ msgstr "grados centesimales"

#: n:366
#~ msgid "Display measurements in"
#~ msgstr "Muestra las distancias en"

#: n:367
#~ msgid "Display angles in"
#~ msgstr "Muestra los ángulos en"

#. TRANSLATORS: reverses the sense of the mouse controls
#: n:368
#~ msgid "Reverse the sense of the controls"
#~ msgstr "Invierte el sentido de los controles"

#: n:369
#~ msgid "Display scale bar"
#~ msgstr "Muestra la escala gráfica"

#: n:370
#~ msgid "Display depth bar"
#~ msgstr "Muestra la escala de profundidad"

#: n:371
#~ msgid "Display compass"
#~ msgstr "Muestra la brújula"

#: n:372
#~ msgid "Display clinometer"
#~ msgstr "Muestra el clinómetro"

#: n:373
#~ msgid "Display side panel"
#~ msgstr "Muestra el panel lateral"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
#. in Compass bearing)
#: ../src/mainfrm.cc:2114
#: n:374
#, c-format
msgid "%s: H %.2f%s, Brg %03d%s"
msgstr "%s: H %.2f%s, Azim %03d%s"

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:2148
#: n:375
#, c-format
msgid "%s: V %.2f%s"
msgstr "%s: V %.2f%s"

#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
#. tree hierarchy of survey station names
#: ../src/mainfrm.cc:1044
#: n:376
msgid "Surveys"
msgstr "Topografías"

#: ../src/mainfrm.cc:1045
#: n:377
msgid "Presentation"
msgstr "Presentación"

#: ../src/mainfrm.cc:211
#: n:378
msgid "Easting"
msgstr "Este"

#: ../src/mainfrm.cc:212
#: n:379
msgid "Northing"
msgstr "Norte"

#: ../src/mainfrm.cc:761
#: n:380
msgid "&Print…\tCtrl+P"
msgstr "&Imprimir…\tCtrl+P"

#: ../src/mainfrm.cc:762
#: n:381
msgid "P&age Setup…"
msgstr "Configuración de la &página…"

#: ../src/mainfrm.cc:766
#: n:382
msgid "&Export as…"
msgstr "&Exporta como…"

#. TRANSLATORS: Title of file dialog to choose name and type of exported
#. file.
#: ../src/printwx.cc:619
#: n:401
msgid "Export as:"
msgstr ""

#. TRANSLATORS: Title of the export
#. dialog
#: ../src/printwx.cc:295
#: n:383
msgid "Export"
msgstr "Exportar"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:142
#: n:390
msgid "System Information:"
msgstr "Información del Sistema:"

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printwx.cc:656
#: n:398
msgid "Print Preview"
msgstr "Vista previa de la impressión"

#. TRANSLATORS: Title of the print
#. dialog
#: ../src/printwx.cc:292
#: n:399
msgid "Print"
msgstr "Imprimir"

#: ../src/printwx.cc:566
#: n:400
msgid "&Print…"
msgstr "&Imprimir…"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:453
#: n:403
msgid "Sur&face Survey Legs"
msgstr "Tiradas de topografia de super&ficie"

#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:97
#: n:404
msgid "Edit Waypoint"
msgstr "Editar waypoint"

#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
#. in a presentation.
#: ../src/mainfrm.cc:136
#: n:278
msgid " (unused in perspective view)"
msgstr ""

#. TRANSLATORS: Field label in dialog to edit a waypoint in a
#. presentation.
#: ../src/mainfrm.cc:143
#: n:279
msgid "Time: "
msgstr "Tiempo: "

#. TRANSLATORS: units+info after time field in dialog to edit a
#. waypoint in a presentation.
#: ../src/mainfrm.cc:147
#: n:282
msgid " secs (0 = auto; *6 = 6 times auto)"
msgstr ""

#. TRANSLATORS: %s will be replaced with "Aven" currently (and
#. perhaps by "Survex" or other things in future).
#: ../src/aven.cc:230
#: n:405
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn’t available."
msgstr "Se requiere OpenGL para trabajar la versión de %s, pero no está disponible."

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:159
#: n:500
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr "Movido por (%3.2f,%3.2f,%3.2f): %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:196
#: n:501
#, c-format
msgid "Added: %s"
msgstr "Añadido: %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:219
#: n:502
#, c-format
msgid "Deleted: %s"
msgstr "Borrado: %s"

#. TRANSLATORS: for extend: the user specified breaking a loop or
#. changing extend direction at this station, but we didn’t find it in
#. the 3d file
#: ../src/extend.c:262
#: ../src/extend.c:280
#: ../src/extend.c:325
#: ../src/extend.c:367
#: ../src/extend.c:409
#: n:510
#, c-format
msgid "Failed to find station %s"
msgstr "La estación %s no se ha encontrado"

#. TRANSLATORS: for extend: the user specified breaking a loop or
#. changing extend direction at this leg, but we didn’t find it in the
#. 3d file
#: ../src/extend.c:306
#: ../src/extend.c:348
#: ../src/extend.c:390
#: ../src/extend.c:432
#: n:511
#, c-format
msgid "Failed to find leg %s → %s"
msgstr "No se han encontrado las tiradas %s → %s"

#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:253
#: n:512
#, c-format
msgid "Starting from station %s"
msgstr "Inicio desde la estación %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:273
#: n:513
#, c-format
msgid "Extending to the left from station %s"
msgstr "Extendiendo hacia la izquierda desde la estación %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:318
#: n:514
#, c-format
msgid "Extending to the right from station %s"
msgstr "Extendiendo hacia la derecha desde la estación %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:293
#: n:515
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr "Extendiendo hacia la izquierda desde la tirada %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:338
#: n:516
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr "Extendiendo hacia la derecha desde la tirada %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:402
#: n:517
#, c-format
msgid "Breaking survey loop at station %s"
msgstr "Rompiendo el bucle en la estación %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:422
#: n:518
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr "Rompiendo el bucle en la tirada %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:360
#: n:519
#, c-format
msgid "Swapping extend direction from station %s"
msgstr "Cambiando la dirección del alzado extendido desde la estación %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:380
#: n:520
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr "Cambiando la dirección del alzado extendido desde la tirada %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:550
#: n:521
#, c-format
msgid "Applying specfile: “%s”"
msgstr "Aplicando fichero de especificaciones: “%s”"

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:613
#: n:522
#, c-format
msgid "Writing %s…"
msgstr "Escribiendo %s…"

#: ../src/findentrances.cc:100
#: ../src/gpx.cc:70
#: n:287
#, c-format
msgid "Failed to initialise input coordinate system “%s”"
msgstr ""

#: ../src/findentrances.cc:103
#: ../src/gpx.cc:75
#: n:288
#, c-format
msgid "Failed to initialise output coordinate system “%s”"
msgstr ""

#: ../src/findentrances.cc:158
#: n:388
msgid "-d PROJ_DATUM 3D_FILE"
msgstr "-d DATURM_PROJ ARCHIVO_3D"

#. TRANSLATORS: The PROJ library is used to do coordinate transformations
#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
#. what the input datum is.
#: ../src/findentrances.cc:149
#: n:389
msgid "input datum as string to pass to PROJ"
msgstr ""

#. TRANSLATORS: The PROJ library is used to do coordinate transformations
#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
#. of the coordinate projection in use, the user must specify it here for
#. export formats which need to know it (e.g. GPX).
#: ../src/printwx.cc:527
#: n:440
msgid "Coordinate projection"
msgstr ""

#: ../src/readval.c:336
#: n:392
msgid "Separator in survey name"
msgstr ""

#: ../src/readval.c:124
#: ../src/readval.c:139
#: ../src/readval.c:156
#: n:3
msgid "Can't have a leg between two anonymous stations"
msgstr ""

#: ../src/dump3d.c:52
#: n:396
msgid "show survey date information (if present)"
msgstr ""

#: ../src/mainfrm.cc:858
#: n:406
msgid "Spla&y Legs"
msgstr ""

#: ../src/mainfrm.cc:855
#: n:407
msgid "&Hide"
msgstr "&Oculta"

#: ../src/mainfrm.cc:856
#: n:408
msgid "&Fade"
msgstr "&Descolorarse"

#: ../src/mainfrm.cc:857
#: n:409
msgid "&Show"
msgstr "&Mostrar"

#: ../src/printwx.cc:360
#: n:410
msgid "Export format"
msgstr "Formato de exportación"