Context Navigation

el.po @ 5f69a50

Visit:

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-datawalls-data-hanging-as-warning

Last change on this file since 5f69a50 was 5f69a50, checked in by Olly Betts <olly@…>, 9 years ago
lib/: Update source references.
Property mode set to `100644`
File size: 69.7 KB

Rev	Line
[673a284]	1	msgid ""
	2	msgstr ""
	3	"Project-Id-Version: survex\n"
	4	"Report-Msgid-Bugs-To: olly@survex.com\n"
	5	"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
	6	"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
	7	"Last-Translator: Olly Betts <olly@survex.com>\n"
	8	"Language-Team: \n"
	9	"MIME-Version: 1.0\n"
	10	"Content-Type: text/plain; charset=utf-8\n"
	11	"Content-Transfer-Encoding: 8bit\n"
[2d8b140]	12	"Language: el\n"
[673a284]	13
[8377f15]	14	#. TRANSLATORS: Aven menu titles. An “&” goes before the letter of any
	15	#. accelerator key. The accelerators must be different within this group
[5f69a50]	16	#: ../src/mainfrm.cc:985
[8377f15]	17	#: n:210
	18	msgid "&File"
	19	msgstr "&Αρχείο"
	20
[5f69a50]	21	#: ../src/mainfrm.cc:986
[8377f15]	22	#: n:211
	23	msgid "&Rotation"
	24	msgstr ""
	25
[5f69a50]	26	#: ../src/mainfrm.cc:987
[8377f15]	27	#: n:212
	28	msgid "&Orientation"
	29	msgstr "&Προσανατολισμός"
	30
[5f69a50]	31	#: ../src/mainfrm.cc:988
[8377f15]	32	#: n:213
	33	msgid "&View"
	34	msgstr ""
	35
[5f69a50]	36	#: ../src/mainfrm.cc:990
[8377f15]	37	#: n:214
	38	msgid "&Controls"
	39	msgstr ""
	40
[5f69a50]	41	#: ../src/mainfrm.cc:999
[8377f15]	42	#: n:215
	43	msgid "&Help"
	44	msgstr "&Βοήθεια"
	45
[5f69a50]	46	#: ../src/mainfrm.cc:992
[8377f15]	47	#: n:216
	48	msgid "&Presentation"
	49	msgstr ""
	50
	51	#. TRANSLATORS: as in: Usage: cavern …
	52	#: ../src/cmdline.c:168
	53	#: n:49
	54	msgid "Usage"
	55	msgstr "Χρήση"
	56
[673a284]	57	#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
	58	#. was trying to allocate space for.
	59	#: ../src/message.c:85
	60	#: n:1
[31f1db0]	61	#, fuzzy, c-format
[673a284]	62	msgid "Out of memory (couldn’t find %lu bytes)."
[31f1db0]	63	msgstr "Ανεπαρκής μνήμη (%lu bytes)"
	64
	65	#. TRANSLATORS: %s will be replaced by the filename that we were trying
	66	#. to read when we ran out of memory.
	67	#: ../src/img_hosted.c:34
	68	#: n:38
	69	#, fuzzy, c-format
	70	msgid "Out of memory trying to read file “%s”"
	71	msgstr "Ανεπαρκής μνήμη: “%s”"
[673a284]	72
	73	#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
	74	#. greater" if that gives a more natural translation. It's
	75	#. technically not quite right when there are parallel active release
	76	#. series (e.g. Survex 1.0.40 was released after 1.2.0), but this
[a7d4233]	77	#. seems unlikely to confuse users. "Survex" is the name of the
	78	#. software, so should not be translated.
	79	#.
	80	#. Here "survey" is a "cave map" rather than list of questions - it should be
	81	#. translated to the terminology that cavers using the language would use.
[c6a54a8]	82	#: ../src/commands.c:2059
[673a284]	83	#: n:2
	84	#, c-format
	85	msgid "Survex version %s or greater required to process this survey data."
	86	msgstr ""
	87
	88	#. TRANSLATORS: Indicates a warning message e.g.:
	89	#. "spoon.svx:12: warning: *prefix is deprecated"
[a7d4233]	90	#: ../src/aven.cc:397
[8377f15]	91	#: ../src/cavernlog.cc:245
[c6a54a8]	92	#: ../src/message.c:1272
[673a284]	93	#: n:4
	94	msgid "warning"
	95	msgstr "προειδοποίηση"
	96
[31f1db0]	97	#. TRANSLATORS: Indicates an error message e.g.:
	98	#. "spoon.svx:13:4: error: Field may not be omitted"
[8377f15]	99	#: ../src/cavernlog.cc:244
[c6a54a8]	100	#: ../src/message.c:1276
[31f1db0]	101	#: n:93
	102	msgid "error"
[4b5971f]	103	msgstr "σφάλμα"
[31f1db0]	104
[673a284]	105	#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
[a7d4233]	106	#. by the line number in that file. Your translation should also contain
	107	#. %s:%u so that automatic parsing of error messages to determine the file
	108	#. and line number still works.
	109	#: ../src/datain.c:109
[673a284]	110	#: n:5
	111	#, c-format
	112	msgid "In file included from %s:%u:\n"
	113	msgstr ""
	114
	115	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
	116	#. http://en.wikipedia.org/wiki/Deprecation
[c6a54a8]	117	#: ../src/commands.c:589
[673a284]	118	#: n:6
	119	msgid "prefix is deprecated - use begin and *end instead"
	120	msgstr ""
	121
	122	#. TRANSLATORS: Here "station" is a survey station, not a train station.
	123	#: ../src/readval.c:206
	124	#: n:7
	125	#, c-format
	126	msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
	127	msgstr ""
	128
[a7d4233]	129	#: ../src/readval.c:387
[673a284]	130	#: n:8
	131	msgid "Field may not be omitted"
	132	msgstr ""
	133
[c6a54a8]	134	#: ../src/datain.c:1553
	135	#: ../src/datain.c:1839
[a7d4233]	136	#: ../src/readval.c:389
	137	#: ../src/readval.c:430
	138	#: ../src/readval.c:460
[673a284]	139	#: n:9
	140	#, c-format
	141	msgid "Expecting numeric field, found “%s”"
	142	msgstr ""
	143
[c6a54a8]	144	#: ../src/commands.c:1657
[673a284]	145	#: n:10
	146	#, c-format
	147	msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
	148	msgstr ""
	149
	150	#: ../src/debug.h:45
	151	#: ../src/debug.h:47
	152	#: ../src/matrix.c:352
	153	#: ../src/message.c:238
	154	#: n:11
	155	msgid "Bug in program detected! Please report this to the authors"
	156	msgstr ""
	157
[c6a54a8]	158	#: ../src/commands.c:2174
[a7d4233]	159	#: ../src/extend.c:436
[673a284]	160	#: n:12
	161	#, c-format
	162	msgid "Unknown command “%s”"
	163	msgstr ""
	164
	165	#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a7d4233]	166	#: ../src/netbits.c:449
[673a284]	167	#: n:13
	168	#, c-format
	169	msgid "Station “%s” equated to itself"
	170	msgstr ""
	171
	172	#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
	173	#. survey stations.
[c6a54a8]	174	#: ../src/datain.c:1073
[673a284]	175	#: n:14
	176	msgid "Compass reading may not be omitted except on plumbed legs"
	177	msgstr ""
	178
[a7d4233]	179	#: ../src/datain.c:284
	180	#: ../src/extend.c:441
[673a284]	181	#: n:15
	182	msgid "End of line not blank"
	183	msgstr ""
	184
[a720caa]	185	#: ../src/cavern.c:393
[673a284]	186	#: n:16
	187	#, c-format
	188	msgid "There were %d warning(s)."
	189	msgstr ""
	190
	191	#. TRANSLATORS: %s is replaced by the command we attempted to run.
[8377f15]	192	#: ../src/cavernlog.cc:176
	193	#: ../src/cavernlog.cc:236
[673a284]	194	#: n:17
	195	#, c-format
	196	msgid "Couldn’t run external command: “%s”"
	197	msgstr "Η εκτέλεση της εντολής “%s” απέτυχε"
	198
	199	#: ../src/datain.c:80
	200	#: ../src/datain.c:88
	201	#: ../src/datain.c:95
[a7d4233]	202	#: ../src/datain.c:770
	203	#: ../src/extend.c:559
[673a284]	204	#: ../src/sorterr.c:80
	205	#: ../src/sorterr.c:97
	206	#: ../src/sorterr.c:240
	207	#: n:18
	208	msgid "Error reading file"
	209	msgstr ""
	210
[c6a54a8]	211	#: ../src/message.c:1292
[673a284]	212	#: n:19
	213	msgid "Too many errors - giving up"
	214	msgstr ""
	215
	216	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
	217	#. http://en.wikipedia.org/wiki/Deprecation
[c6a54a8]	218	#: ../src/commands.c:1536
[673a284]	219	#: n:20
	220	msgid "DEFAULT is deprecated - use CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
	221	msgstr ""
	222
	223	#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
	224	#. (a weight on a string). So the problem here is that the leg is
	225	#. vertical, so a compass reading has no meaning!
[c6a54a8]	226	#: ../src/datain.c:1044
[673a284]	227	#: n:21
	228	msgid "Compass reading given on plumbed leg"
	229	msgstr ""
	230
[c6a54a8]	231	#: ../src/commands.c:677
[673a284]	232	#: n:22
	233	msgid "END with no matching BEGIN in this file"
	234	msgstr ""
	235
[a7d4233]	236	#: ../src/datain.c:757
[673a284]	237	#: n:23
	238	msgid "BEGIN with no matching END in this file"
	239	msgstr ""
	240
	241	#. TRANSLATORS: A station must be exported out of each level it is in, so
	242	#. this would give "Station “\outer.inner.1” not exported from survey
	243	#. “\outer”)":
	244	#.
	245	#. *equate entrance outer.inner.1
	246	#. *begin outer
	247	#. *begin inner
	248	#. *export 1
	249	#. 1 2 1.23 045 -6
	250	#. *end inner
	251	#. *end outer
[a7d4233]	252	#.
	253	#. Here "survey" is a "cave map" rather than list of questions - it should be
	254	#. translated to the terminology that cavers using the language would use.
[c6a54a8]	255	#: ../src/commands.c:993
	256	#: ../src/commands.c:995
[673a284]	257	#: ../src/listpos.c:104
[a7d4233]	258	#: ../src/readval.c:328
	259	#: ../src/readval.c:331
[673a284]	260	#: n:26
	261	#, c-format
	262	msgid "Station “%s” not exported from survey “%s”"
	263	msgstr ""
	264
	265	#. TRANSLATORS: This error occurs if there's an attempt to
	266	#. export a station from a survey which doesn't actually exist.
[a7d4233]	267	#.
	268	#. Here "survey" is a "cave map" rather than list of questions - it should be
	269	#. translated to the terminology that cavers using the language would use.
	270	#: ../src/listpos.c:112
[673a284]	271	#: n:286
	272	#, c-format
	273	msgid "Reference to station “%s” from non-existent survey “%s”"
	274	msgstr ""
	275
[a7d4233]	276	#. TRANSLATORS: Here "station" is a survey station, not a train station.
	277	#.
	278	#. Here "survey" is a "cave map" rather than list of questions - it should be
	279	#. translated to the terminology that cavers using the language would use.
	280	#: ../src/readval.c:302
[673a284]	281	#: n:27
	282	#, c-format
	283	msgid "“%s” can’t be both a station and a survey"
	284	msgstr ""
	285
[a7d4233]	286	#. TRANSLATORS: Here "station" is a survey station, not a train station.
	287	#: ../src/extend.c:248
	288	#: ../src/extend.c:267
	289	#: ../src/extend.c:312
	290	#: ../src/extend.c:354
	291	#: ../src/extend.c:396
[673a284]	292	#: ../src/readval.c:202
	293	#: n:28
	294	msgid "Expecting station name"
	295	msgstr ""
	296
[c6a54a8]	297	#: ../src/commands.c:1985
[673a284]	298	#: n:31
	299	#, c-format
	300	msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
	301	msgstr ""
	302
[c6a54a8]	303	#: ../src/commands.c:1992
[673a284]	304	#: n:32
	305	#, c-format
	306	msgid "Found “%s”, expecting “ON” or “OFF”"
	307	msgstr ""
	308
	309	#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
	310	#. translated.
[a7d4233]	311	#.
	312	#. Here "station" is a survey station, not a train station.
[c6a54a8]	313	#: ../src/commands.c:953
[673a284]	314	#: n:33
	315	msgid "Only one station in EQUATE command"
	316	msgstr ""
	317
[c6a54a8]	318	#. TRANSLATORS: A "quantity" is something measured like "LENGTH",
	319	#. "BEARING", "ALTITUDE", etc.
	320	#: ../src/commands.c:439
[673a284]	321	#: n:34
	322	#, c-format
	323	msgid "Unknown quantity “%s”"
	324	msgstr ""
	325
[c6a54a8]	326	#: ../src/commands.c:354
[673a284]	327	#: n:35
	328	#, c-format
	329	msgid "Unknown units “%s”"
	330	msgstr ""
	331
[c6a54a8]	332	#: ../src/commands.c:1825
	333	#: ../src/commands.c:1900
[673a284]	334	#: n:434
	335	msgid "Unknown coordinate system"
	336	msgstr ""
	337
[c6a54a8]	338	#: ../src/commands.c:1920
	339	#: ../src/commands.c:1945
[673a284]	340	#: n:443
	341	#, c-format
	342	msgid "Invalid coordinate system: %s"
	343	msgstr ""
	344
[c6a54a8]	345	#: ../src/commands.c:1907
	346	#: ../src/commands.c:1925
[673a284]	347	#: n:435
	348	msgid "Coordinate system unsuitable for output"
	349	msgstr ""
	350
[c6a54a8]	351	#: ../src/commands.c:853
[673a284]	352	#: n:436
	353	msgid "Failed to convert coordinates"
	354	msgstr ""
	355
[c6a54a8]	356	#: ../src/commands.c:858
[673a284]	357	#: n:437
	358	msgid "The input projection is set but the output projection isn't"
	359	msgstr ""
	360
[c6a54a8]	361	#: ../src/commands.c:860
[673a284]	362	#: n:438
	363	msgid "The output projection is set but the input projection isn't"
	364	msgstr ""
	365
[c6a54a8]	366	#: ../src/commands.c:760
[673a284]	367	#: n:439
	368	msgid "Coordinates can't be omitted when coordinate system has been specified"
	369	msgstr ""
	370
	371	#. TRANSLATORS: Used when a BEGIN command has no survey, but the
	372	#. END command does, e.g.:
	373	#.
	374	#. *begin
	375	#. 1 2 10.00 178 -01
	376	#. *end entrance <--[Message given here]
[c6a54a8]	377	#: ../src/commands.c:699
[673a284]	378	#: n:36
	379	msgid "Matching BEGIN command has no survey name"
	380	msgstr ""
	381
	382	#. TRANSLATORS: Note: In English you talk about the units of a single
	383	#. measurement, but the correct term in other languages may be singular.
[c6a54a8]	384	#: ../src/commands.c:367
[673a284]	385	#: n:37
	386	#, c-format
	387	msgid "Invalid units “%s” for quantity"
	388	msgstr ""
	389
[c6a54a8]	390	#: ../src/commands.c:430
[673a284]	391	#: n:39
	392	#, c-format
	393	msgid "Unknown instrument “%s”"
	394	msgstr ""
	395
	396	#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
	397	#. translate
[c6a54a8]	398	#: ../src/commands.c:1504
[673a284]	399	#: n:40
	400	msgid "Scale factor must be 1.0 for DECLINATION"
	401	msgstr ""
	402
	403	#. TRANSLATORS: If the scale factor for an instrument is zero, then any
	404	#. reading would be mapped to zero, which doesn't make sense.
[c6a54a8]	405	#: ../src/commands.c:1510
[673a284]	406	#: n:391
	407	msgid "Scale factor must be non-zero"
	408	msgstr ""
	409
[c6a54a8]	410	#: ../src/commands.c:1555
[673a284]	411	#: n:41
	412	#, c-format
	413	msgid "Unknown setting “%s”"
	414	msgstr ""
	415
[c6a54a8]	416	#: ../src/commands.c:477
[673a284]	417	#: n:42
	418	#, c-format
	419	msgid "Unknown character class “%s”"
	420	msgstr ""
	421
[a7d4233]	422	#: ../src/extend.c:605
[673a284]	423	#: ../src/netskel.c:90
	424	#: n:43
	425	msgid "No survey data"
	426	msgstr ""
	427
	428	#: ../src/filename.c:52
[31f1db0]	429	#: ../src/img_hosted.c:35
[673a284]	430	#: n:44
	431	#, c-format
	432	msgid "Filename “%s” refers to directory"
	433	msgstr ""
	434
[c6a54a8]	435	#. TRANSLATORS: At the end of processing (or if a *SOLVE command is used)
	436	#. cavern will issue this error if there are any sections of the survey
	437	#. network which are hanging.
	438	#: ../src/netartic.c:387
[673a284]	439	#: n:45
	440	msgid "Survey not all connected to fixed stations"
	441	msgstr ""
	442
[c6a54a8]	443	#: ../src/commands.c:883
[a7d4233]	444	#: ../src/datain.c:682
[673a284]	445	#: n:46
	446	msgid "Station already fixed or equated to a fixed point"
	447	msgstr ""
	448
	449	#: ../src/cavern.c:298
	450	#: ../src/filename.c:55
[31f1db0]	451	#: ../src/img_hosted.c:36
[673a284]	452	#: n:47
	453	#, c-format
	454	msgid "Failed to open output file “%s”"
	455	msgstr ""
	456
[c6a54a8]	457	#: ../src/commands.c:1610
[673a284]	458	#: n:48
	459	msgid "Standard deviation must be positive"
	460	msgstr ""
	461
	462	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	463	#. "survey stations".
	464	#.
	465	#. %s is replaced by the name of the station.
[a7d4233]	466	#: ../src/netbits.c:346
[673a284]	467	#: n:50
	468	#, c-format
	469	msgid "Survey leg with same station (“%s”) at both ends - typing error?"
	470	msgstr ""
	471
[85c0078]	472	#. TRANSLATORS: %.f%s will be replaced with a right angle in the
	473	#. units currently in use, e.g. "90°" or "100ᵍ". And "absolute
	474	#. value" means the reading ignoring the sign (so it might be
	475	#. < -90° or > 90°.
[c6a54a8]	476	#: ../src/datain.c:979
	477	#: ../src/datain.c:992
	478	#: ../src/datain.c:1010
[673a284]	479	#: n:51
[85c0078]	480	#, c-format
	481	msgid "Clino reading over %.f%s (absolute value)"
[673a284]	482	msgstr ""
	483
[a7d4233]	484	#: ../src/netbits.c:464
[673a284]	485	#: n:52
	486	#, c-format
	487	msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
	488	msgstr ""
	489
	490	#. TRANSLATORS: "equal" as in:
	491	#.
	492	#. *fix a 1 2 3
	493	#. *fix b 1 2 3
	494	#. *equate a b
[a7d4233]	495	#: ../src/netbits.c:475
[673a284]	496	#: n:53
	497	#, c-format
	498	msgid "Equating two equal fixed points: “%s” and “%s”"
	499	msgstr ""
	500
	501	#. TRANSLATORS: " *fix a " gives this message:
[c6a54a8]	502	#: ../src/commands.c:770
[673a284]	503	#: n:54
	504	msgid "FIX command with no coordinates - fixing at (0,0,0)"
	505	msgstr ""
	506
	507	#. TRANSLATORS: fix a 1 2 3 / fix a 1 2 3
[c6a54a8]	508	#: ../src/commands.c:887
[a7d4233]	509	#: ../src/datain.c:684
[673a284]	510	#: n:55
	511	msgid "Station already fixed at the same coordinates"
	512	msgstr ""
	513
	514	#. TRANSLATORS: Emitted after second and subsequent "FIX command with
	515	#. no coordinates - fixing at (0,0,0)" warnings.
[c6a54a8]	516	#: ../src/commands.c:778
[673a284]	517	#: n:441
	518	#, c-format
	519	msgid "Already had FIX command with no coordinates for station “%s”"
	520	msgstr ""
	521
[c6a54a8]	522	#: ../src/commands.c:1710
[673a284]	523	#: n:442
	524	#, c-format
	525	msgid "Station “%s” fixed before CS command first used"
	526	msgstr ""
	527
	528	#. TRANSLATORS: The EXPORT command is only valid just after BEGIN
	529	#. <SURVEY>, so this would generate this error:
	530	#.
	531	#. *begin fred
	532	#. 1 2 1.23 045 -6
	533	#. *export 2
	534	#. *end fred
[c6a54a8]	535	#: ../src/commands.c:2188
[673a284]	536	#: n:57
	537	msgid "EXPORT must immediately follow “BEGIN <SURVEY>”"
	538	msgstr ""
	539
[31f1db0]	540	#: ../src/readval.c:516
[673a284]	541	#: n:58
	542	msgid "Invalid year (< 1900 or > 2078)"
	543	msgstr ""
	544
	545	#. TRANSLATORS: Suspicious means something like 410 degrees or -20
	546	#. degrees
[c6a54a8]	547	#: ../src/datain.c:871
	548	#: ../src/datain.c:880
[673a284]	549	#: n:59
	550	msgid "Suspicious compass reading"
	551	msgstr ""
	552
[c6a54a8]	553	#: ../src/datain.c:1529
[673a284]	554	#: n:60
	555	msgid "Negative tape reading"
	556	msgstr ""
	557
[c6a54a8]	558	#: ../src/commands.c:765
[673a284]	559	#: n:61
	560	msgid "Same station fixed twice with no coordinates"
	561	msgstr ""
	562
	563	#. TRANSLATORS: This means that the data fed in said this.
	564	#.
	565	#. It could be a gross error (e.g. the decimal point is missing from the
	566	#. depth gauge reading) or it could just be due to random error on a near
	567	#. vertical leg
[c6a54a8]	568	#: ../src/datain.c:1228
[673a284]	569	#: n:62
	570	msgid "Tape reading is less than change in depth"
	571	msgstr ""
	572
	573	#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
	574	#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
	575	#. neither style nor reading is a keyword in the program This error
	576	#. complains about a depth gauge reading in normal style, for example
[c6a54a8]	577	#: ../src/commands.c:1214
[673a284]	578	#: n:63
	579	#, c-format
	580	msgid "Reading “%s” not allowed in data style “%s”"
	581	msgstr ""
	582
	583	#. TRANSLATORS: i.e. not enough readings for the style.
[c6a54a8]	584	#: ../src/commands.c:1404
[673a284]	585	#: n:64
	586	#, c-format
	587	msgid "Too few readings for data style “%s”"
	588	msgstr ""
	589
	590	#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
[c6a54a8]	591	#: ../src/commands.c:1174
[673a284]	592	#: n:65
	593	#, c-format
	594	msgid "Data style “%s” unknown"
	595	msgstr ""
	596
	597	#. TRANSLATORS: Here "station" is a survey station, not a train station.
	598	#.
	599	#. Exporting a station twice gives this error:
	600	#.
	601	#. *begin example
	602	#. *export 1
	603	#. *export 1
	604	#. 1 2 1.24 045 -6
	605	#. *end example
[c6a54a8]	606	#: ../src/commands.c:1044
[673a284]	607	#: n:66
	608	#, c-format
	609	msgid "Station “%s” already exported"
	610	msgstr ""
	611
	612	#. TRANSLATORS: complains about a situation like trying to define
	613	#. two from stations per leg
[c6a54a8]	614	#: ../src/commands.c:1240
[673a284]	615	#: n:67
	616	#, c-format
	617	msgid "Duplicate reading “%s”"
	618	msgstr ""
	619
[c6a54a8]	620	#: ../src/commands.c:914
[673a284]	621	#: n:68
	622	#, c-format
	623	msgid "FLAG “%s” unknown"
	624	msgstr ""
	625
[a7d4233]	626	#: ../src/readval.c:474
[673a284]	627	#: n:69
	628	msgid "Missing \""
	629	msgstr ""
	630
	631	#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a7d4233]	632	#: ../src/listpos.c:122
[673a284]	633	#: n:70
	634	#, c-format
	635	msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
	636	msgstr ""
	637
	638	#. TRANSLATORS: Here "station" is a survey station, not a train
	639	#. station.
[c6a54a8]	640	#: ../src/netartic.c:399
[673a284]	641	#: n:71
	642	msgid "The following survey stations are not attached to a fixed point:"
	643	msgstr ""
	644
	645	#: ../src/netskel.c:135
	646	#: n:72
	647	#, c-format
	648	msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
	649	msgstr ""
	650
	651	#. TRANSLATORS: fixed survey station that is not part of any survey
	652	#: ../src/netskel.c:958
	653	#: n:73
	654	#, c-format
	655	msgid "Unused fixed point “%s”"
	656	msgstr ""
	657
	658	#: ../src/matrix.c:123
	659	#: n:74
	660	msgid "Network solved by reduction - no simultaneous equations to solve."
	661	msgstr ""
	662
	663	#: ../src/matrix.c:134
	664	#: n:75
	665	#, c-format
	666	msgid "Solving %d simultaneous equations"
	667	msgstr ""
	668
[c6a54a8]	669	#. TRANSLATORS: This is an error from the *DATA command. It
	670	#. means that a reading (which will appear where %s is isn't
	671	#. valid as the list of readings has already included the same
	672	#. reading, or an equivalent one (e.g. you can't have both
	673	#. DEPTH and DEPTHCHANGE together).
	674	#: ../src/commands.c:1307
[673a284]	675	#: n:77
	676	#, c-format
	677	msgid "Reading “%s” duplicates previous reading(s)"
	678	msgstr ""
	679
	680	#: ../src/matrix.c:132
	681	#: n:78
	682	msgid "Solving one equation"
	683	msgstr ""
	684
[c6a54a8]	685	#: ../src/datain.c:945
	686	#: ../src/datain.c:1217
	687	#: ../src/datain.c:1410
[673a284]	688	#: n:79
	689	msgid "Negative adjusted tape reading"
	690	msgstr ""
	691
[c6a54a8]	692	#: ../src/commands.c:2096
	693	#: ../src/commands.c:2116
[673a284]	694	#: n:80
	695	msgid "Date is in the future!"
	696	msgstr ""
	697
[c6a54a8]	698	#: ../src/commands.c:2120
[673a284]	699	#: n:81
	700	msgid "End of date range is before the start"
	701	msgstr ""
	702
	703	#. TRANSLATORS: e.g. the user specifies a passage cross-section at
	704	#. station "entrance.27", but there is no station "entrance.27" in
	705	#. the centre-line.
	706	#: ../src/netskel.c:1046
	707	#: n:83
	708	#, c-format
	709	msgid "Cross section specified at non-existent station “%s”"
	710	msgstr ""
	711
	712	#. TRANSLATORS: In data with backsights, the user has tried to give a
	713	#. plumb for the foresight and a clino reading for the backsight, or
	714	#. something similar.
[c6a54a8]	715	#: ../src/datain.c:1028
	716	#: ../src/datain.c:1052
[673a284]	717	#: n:84
	718	msgid "CLINO and BACKCLINO readings must be of the same type"
	719	msgstr ""
	720
[31f1db0]	721	#: ../src/readval.c:524
[673a284]	722	#: n:86
	723	msgid "Invalid month"
	724	msgstr ""
	725
	726	#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
[31f1db0]	727	#: ../src/readval.c:533
[673a284]	728	#: n:87
	729	msgid "Invalid day of the month"
	730	msgstr ""
	731
	732	#: ../src/cavern.c:247
	733	#: n:88
	734	#, c-format
	735	msgid "3d file format versions %d to %d supported"
	736	msgstr ""
	737
	738	#: ../src/readval.c:200
	739	#: n:89
	740	msgid "Expecting survey name"
	741	msgstr ""
	742
[a7d4233]	743	#: ../src/datain.c:401
	744	#: ../src/extend.c:554
[673a284]	745	#: ../src/img_hosted.c:30
[8377f15]	746	#: ../src/mainfrm.cc:426
[673a284]	747	#: ../src/sorterr.c:146
	748	#: n:24
	749	#, c-format
	750	msgid "Couldn’t open file “%s”"
	751	msgstr "Δεν είναι δυνατό το άνοιγμα του αρχείου “%s”"
	752
[c6a54a8]	753	#: ../src/printwx.cc:687
[673a284]	754	#: n:402
	755	#, c-format
	756	msgid "Couldn’t write file “%s”"
	757	msgstr ""
	758
	759	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
	760	#. http://en.wikipedia.org/wiki/Deprecation
[c6a54a8]	761	#: ../src/commands.c:496
	762	#: ../src/commands.c:569
	763	#: ../src/commands.c:591
	764	#: ../src/commands.c:1189
	765	#: ../src/commands.c:1538
[673a284]	766	#: ../src/readval.c:96
	767	#: n:95
	768	msgid "Further uses of this deprecated feature will not be reported"
	769	msgstr ""
	770
[85c0078]	771	#. TRANSLATORS: %s is replaced by the amount the readings disagree
	772	#. by, e.g. "2.5°" or "3ᵍ".
[c6a54a8]	773	#: ../src/datain.c:910
[673a284]	774	#: n:98
	775	#, c-format
[85c0078]	776	msgid "COMPASS reading and BACKCOMPASS reading disagree by %s"
[673a284]	777	msgstr ""
	778
[85c0078]	779	#. TRANSLATORS: %s is replaced by the amount the readings disagree
	780	#. by, e.g. "2.5°" or "3ᵍ".
[c6a54a8]	781	#: ../src/datain.c:1104
[673a284]	782	#: n:99
	783	#, c-format
[85c0078]	784	msgid "CLINO reading and BACKCLINO reading disagree by %s"
[673a284]	785	msgstr ""
	786
[c6a54a8]	787	#: ../src/commands.c:1186
[673a284]	788	#: n:104
	789	#, c-format
	790	msgid "“data %s %c …” is deprecated - use “data %s …” instead"
	791	msgstr ""
	792
	793	#. TRANSLATORS: Perhaps the user tried to load a different type of file as
	794	#. a Survex .3d file, or the .3d file was corrupted.
	795	#: ../src/3dtopos.c:157
	796	#: ../src/3dtopos.c:163
[a7d4233]	797	#: ../src/cad3d.c:909
	798	#: ../src/cad3d.c:920
[31f1db0]	799	#: ../src/img_hosted.c:39
[673a284]	800	#: n:106
	801	#, c-format
	802	msgid "Bad 3d image file “%s”"
	803	msgstr ""
	804
	805	#. TRANSLATORS: This is the date format string used to timestamp .3d
	806	#. files internally. Probably best to keep it the same for all
	807	#. translations.
	808	#: ../src/img.c:43
[5f69a50]	809	#: ../src/mainfrm.cc:1463
[673a284]	810	#: n:107
	811	#, c-format
	812	msgid "%a,%Y.%m.%d %H:%M:%S %Z"
	813	msgstr ""
	814
	815	#. TRANSLATORS: used a processed survey with no processing date/time info
[5f69a50]	816	#: ../src/mainfrm.cc:1456
[673a284]	817	#: n:108
	818	msgid "Date and time not available."
	819	msgstr ""
	820
[31f1db0]	821	#: ../src/img_hosted.c:40
[673a284]	822	#: n:109
	823	#, c-format
	824	msgid "Error reading from file “%s”"
	825	msgstr ""
	826
[8377f15]	827	#: ../src/cavernlog.cc:522
[673a284]	828	#: ../src/filename.c:79
[31f1db0]	829	#: ../src/img_hosted.c:41
[8377f15]	830	#: ../src/mainfrm.cc:384
[5f69a50]	831	#: ../src/mainfrm.cc:2021
[673a284]	832	#: n:110
	833	#, c-format
	834	msgid "Error writing to file “%s”"
	835	msgstr ""
	836
	837	#: ../src/filename.c:82
	838	#: n:111
	839	msgid "Error writing to file"
	840	msgstr ""
	841
[a720caa]	842	#: ../src/cavern.c:388
[673a284]	843	#: n:113
	844	#, c-format
	845	msgid "There were %d warning(s) and %d error(s) - no output files produced."
	846	msgstr ""
	847
[31f1db0]	848	#: ../src/img_hosted.c:42
[673a284]	849	#: n:114
	850	#, c-format
	851	msgid "File “%s” has a newer format than this program can understand"
	852	msgstr ""
	853
[c6a54a8]	854	#: ../src/printwx.cc:1035
[673a284]	855	#: n:115
	856	msgid "North"
	857	msgstr "Βοράς"
	858
	859	#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
[c6a54a8]	860	#: ../src/printwx.cc:1060
[673a284]	861	#: n:116
	862	msgid "Elevation on"
	863	msgstr ""
	864
[c6a54a8]	865	#: ../src/printwx.cc:489
[673a284]	866	#: n:117
	867	msgid "P&lan view"
	868	msgstr ""
	869
[c6a54a8]	870	#: ../src/printwx.cc:491
[673a284]	871	#: n:285
	872	msgid "&Elevation"
	873	msgstr ""
	874
[5f69a50]	875	#: ../src/gfxcore.cc:807
[8377f15]	876	#: ../src/mainfrm.cc:167
[673a284]	877	#: n:118
	878	msgid "Elevation"
	879	msgstr ""
	880
	881	#. TRANSLATORS: Label used for "clino" in Aven when the view is
	882	#. from directly above.
[5f69a50]	883	#: ../src/gfxcore.cc:719
[673a284]	884	#: n:432
	885	msgid "Plan"
	886	msgstr ""
	887
	888	#. TRANSLATORS: Label used for "clino" in Aven when the view is
	889	#. from directly below.
[5f69a50]	890	#: ../src/gfxcore.cc:729
[673a284]	891	#: n:433
	892	msgid "Kiwi Plan"
	893	msgstr ""
	894
	895	#: ../src/cavern.c:352
	896	#: n:120
	897	msgid "Calculating statistics"
	898	msgstr ""
	899
[31f1db0]	900	#: ../src/readval.c:489
[673a284]	901	#: n:121
	902	msgid "Expecting string field"
	903	msgstr ""
	904
	905	#: ../src/cmdline.c:212
	906	#: n:122
	907	msgid "too few arguments"
	908	msgstr ""
	909
	910	#: ../src/cmdline.c:219
	911	#: n:123
	912	msgid "too many arguments"
	913	msgstr "πάρα πολλές παράμετροι"
	914
	915	#: ../src/cmdline.c:178
	916	#: ../src/cmdline.c:181
	917	#: ../src/cmdline.c:185
	918	#: n:124
	919	msgid "FILE"
	920	msgstr ""
	921
	922	#. TRANSLATORS: In French, Eric chose to use the terminology used by
	923	#. toporobot: "sequence" for the English "traverse", which makes sense
	924	#. (although toporobot actually uses this term to mean something more
	925	#. specific). Feel free to follow this lead if you can't think of a better
	926	#. term - these messages mostly indicate how processing is progressing.
	927	#.
	928	#. A trailing traverse is a dead end back to a junction.
	929	#: ../src/netskel.c:177
	930	#: n:125
	931	msgid "Removing trailing traverses"
	932	msgstr ""
	933
	934	#. TRANSLATORS: In French, Eric chose to use the terminology used by
	935	#. toporobot: "sequence" for the English "traverse", which makes sense
	936	#. (although toporobot actually uses this term to mean something more
	937	#. specific). Feel free to follow this lead if you can't think of a better
	938	#. term - these messages mostly indicate how processing is progressing.
	939	#: ../src/netskel.c:236
	940	#: n:126
	941	msgid "Concatenating traverses"
	942	msgstr ""
	943
	944	#. TRANSLATORS: In French, Eric chose to use the terminology used by
	945	#. toporobot: "sequence" for the English "traverse", which makes sense
	946	#. (although toporobot actually uses this term to mean something more
	947	#. specific). Feel free to follow this lead if you can't think of a better
	948	#. term - these messages mostly indicate how processing is progressing.
	949	#: ../src/netskel.c:434
	950	#: n:127
	951	msgid "Calculating traverses"
	952	msgstr ""
	953
	954	#. TRANSLATORS: In French, Eric chose to use the terminology used by
	955	#. toporobot: "sequence" for the English "traverse", which makes sense
	956	#. (although toporobot actually uses this term to mean something more
	957	#. specific). Feel free to follow this lead if you can't think of a better
	958	#. term - these messages mostly indicate how processing is progressing.
	959	#.
	960	#. A trailing traverse is a dead end back to a junction.
	961	#: ../src/netskel.c:779
	962	#: n:128
	963	msgid "Calculating trailing traverses"
	964	msgstr ""
	965
	966	#: ../src/network.c:82
	967	#: n:129
	968	msgid "Simplifying network"
	969	msgstr ""
	970
	971	#: ../src/network.c:540
	972	#: n:130
	973	msgid "Calculating network"
	974	msgstr ""
	975
[c6a54a8]	976	#: ../src/datain.c:1519
[673a284]	977	#: n:131
	978	#, c-format
	979	msgid "Found “%s”, expecting “F” or “B”"
	980	msgstr ""
	981
[c6a54a8]	982	#: ../src/cavern.c:454
[673a284]	983	#: n:132
	984	#, c-format
[85c0078]	985	msgid "Total length of survey legs = %7.2f%s (%7.2f%s adjusted)"
[673a284]	986	msgstr ""
	987
[c6a54a8]	988	#: ../src/cavern.c:457
[673a284]	989	#: n:133
	990	#, c-format
[85c0078]	991	msgid "Total plan length of survey legs = %7.2f%s"
[673a284]	992	msgstr ""
	993
[c6a54a8]	994	#: ../src/cavern.c:460
[673a284]	995	#: n:134
	996	#, c-format
[85c0078]	997	msgid "Total vertical length of survey legs = %7.2f%s"
[673a284]	998	msgstr ""
	999
	1000	#. TRANSLATORS: numbers are altitudes of highest and lowest stations
[c6a54a8]	1001	#: ../src/cavern.c:467
[673a284]	1002	#: n:135
	1003	#, c-format
[85c0078]	1004	msgid "Vertical range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
[673a284]	1005	msgstr ""
	1006
	1007	#. TRANSLATORS: c.f. previous message
[c6a54a8]	1008	#: ../src/cavern.c:470
[673a284]	1009	#: n:136
	1010	#, c-format
[85c0078]	1011	msgid "North-South range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
[673a284]	1012	msgstr ""
	1013
	1014	#. TRANSLATORS: c.f. previous two messages
[c6a54a8]	1015	#: ../src/cavern.c:473
[673a284]	1016	#: n:137
	1017	#, c-format
[85c0078]	1018	msgid "East-West range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
[673a284]	1019	msgstr ""
	1020
[c6a54a8]	1021	#: ../src/cavern.c:439
[673a284]	1022	#: n:138
	1023	msgid "There is 1 loop."
	1024	msgstr ""
	1025
[c6a54a8]	1026	#: ../src/cavern.c:441
[673a284]	1027	#: n:139
	1028	#, c-format
	1029	msgid "There are %ld loops."
	1030	msgstr ""
	1031
	1032	#: ../src/cavern.c:374
	1033	#: n:140
	1034	#, c-format
	1035	msgid "CPU time used %5.2fs"
	1036	msgstr ""
	1037
	1038	#: ../src/cavern.c:377
	1039	#: n:141
	1040	#, c-format
	1041	msgid "Time used %5.2fs"
	1042	msgstr ""
	1043
	1044	#: ../src/cavern.c:379
	1045	#: n:142
	1046	msgid "Time used unavailable"
	1047	msgstr ""
	1048
	1049	#: ../src/cavern.c:382
	1050	#: n:143
	1051	#, c-format
	1052	msgid "Time used %5.2fs (%5.2fs CPU time)"
	1053	msgstr ""
	1054
	1055	#: ../src/netskel.c:744
	1056	#: n:145
	1057	#, c-format
	1058	msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
	1059	msgstr ""
	1060
	1061	#: ../src/netskel.c:747
	1062	#: n:146
	1063	#, c-format
	1064	msgid "Error %6.2f%%"
	1065	msgstr "Σφαλμα %6.2f%%"
	1066
	1067	#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
	1068	#. traverse has zero length, so error per metre is meaningless.
	1069	#.
	1070	#. There should be 4 spaces between "Error" and "N/A" so that it lines
	1071	#. up with the numbers in the message above.
	1072	#: ../src/netskel.c:754
	1073	#: n:147
	1074	msgid "Error N/A"
	1075	msgstr "Σφαλμα N/A"
	1076
	1077	#. TRANSLATORS: description of --help option
	1078	#: ../src/cmdline.c:138
	1079	#: n:150
	1080	msgid "display this help and exit"
	1081	msgstr ""
	1082
	1083	#. TRANSLATORS: description of --verbose option
	1084	#: ../src/cmdline.c:141
	1085	#: n:151
	1086	msgid "output version information and exit"
	1087	msgstr ""
	1088
	1089	#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
	1090	#: ../src/cmdline.c:170
	1091	#: n:153
	1092	msgid "OPTION"
	1093	msgstr ""
	1094
[8377f15]	1095	#: ../src/mainfrm.cc:171
[c6a54a8]	1096	#: ../src/printwx.cc:435
	1097	#: ../src/printwx.cc:1097
	1098	#: ../src/printwx.cc:1146
[673a284]	1099	#: n:154
	1100	msgid "Scale"
	1101	msgstr "Κλίμακας"
	1102
	1103	#: ../src/cmdline.c:194
	1104	#: n:157
	1105	#, c-format
	1106	msgid "Try “%s --help” for more information.\n"
	1107	msgstr ""
	1108
[c6a54a8]	1109	#: ../src/avenprcore.cc:169
[673a284]	1110	#: n:166
	1111	#, c-format
	1112	msgid "Page %d of %d"
	1113	msgstr "Σελίδα %d από %d"
	1114
[c6a54a8]	1115	#: ../src/avenprcore.cc:172
	1116	#: ../src/printwx.cc:1542
[673a284]	1117	#: n:167
	1118	#, c-format
	1119	msgid "Survey “%s” Page %d (of %d) Processed on %s"
	1120	msgstr ""
	1121
	1122	#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
	1123	#. something like "123°". The bearing is up the page.
[c6a54a8]	1124	#: ../src/printwx.cc:1041
[673a284]	1125	#: n:168
	1126	#, c-format
	1127	msgid "Plan view, %s up page"
	1128	msgstr ""
	1129
	1130	#. TRANSLATORS: This is used on printouts of elevations, with %s
	1131	#. replaced by something like "123°". The bearing is the direction
	1132	#. we’re looking.
[c6a54a8]	1133	#: ../src/printwx.cc:1073
[673a284]	1134	#: n:169
	1135	#, c-format
	1136	msgid "Elevation facing %s"
	1137	msgstr ""
	1138
	1139	#. TRANSLATORS: This is used on printouts of tilted elevations, with
	1140	#. the first %s replaced by something like "123°", and the second by
	1141	#. something like "-45°". The bearing is the direction we’re
	1142	#. looking.
[c6a54a8]	1143	#: ../src/printwx.cc:1080
[673a284]	1144	#: n:284
	1145	#, c-format
	1146	msgid "Elevation facing %s, tilted %s"
	1147	msgstr ""
	1148
	1149	#. TRANSLATORS: This is used on printouts of extended elevations.
[c6a54a8]	1150	#: ../src/printwx.cc:1089
[673a284]	1151	#: n:191
	1152	msgid "Extended elevation"
	1153	msgstr ""
	1154
[c6a54a8]	1155	#: ../src/cavern.c:425
[673a284]	1156	#: n:172
	1157	msgid "Survey contains 1 survey station,"
	1158	msgstr ""
	1159
[c6a54a8]	1160	#: ../src/cavern.c:427
[673a284]	1161	#: n:173
	1162	#, c-format
	1163	msgid "Survey contains %ld survey stations,"
	1164	msgstr ""
	1165
[c6a54a8]	1166	#: ../src/cavern.c:431
[673a284]	1167	#: n:174
	1168	msgid " joined by 1 leg."
	1169	msgstr ""
	1170
[c6a54a8]	1171	#: ../src/cavern.c:433
[673a284]	1172	#: n:175
	1173	#, c-format
	1174	msgid " joined by %ld legs."
	1175	msgstr ""
	1176
	1177	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
[a7d4233]	1178	#: ../src/listpos.c:185
[673a284]	1179	#: n:176
	1180	msgid "node"
	1181	msgstr ""
	1182
	1183	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
[a7d4233]	1184	#: ../src/listpos.c:187
[673a284]	1185	#: n:177
	1186	msgid "nodes"
	1187	msgstr ""
	1188
	1189	#. TRANSLATORS: "Connected component" in the graph theory sense - it
	1190	#. means there are %ld bits of survey with no connections between them.
	1191	#. This message is only used if there are more than 1.
[c6a54a8]	1192	#: ../src/cavern.c:450
[673a284]	1193	#: n:178
	1194	#, c-format
	1195	msgid "Survey has %ld connected components."
	1196	msgstr ""
	1197
[8377f15]	1198	#. TRANSLATORS: Label for button in aven’s cavern log window which
	1199	#. allows the user to save the log to a file.
	1200	#: ../src/cavernlog.cc:456
	1201	#: n:446
	1202	msgid "Save Log"
	1203	msgstr ""
	1204
[673a284]	1205	#. TRANSLATORS: Label for button in aven’s cavern log window which
	1206	#. causes the survey data to be reprocessed.
[8377f15]	1207	#: ../src/cavernlog.cc:463
	1208	#: ../src/cavernlog.cc:474
[673a284]	1209	#: n:184
	1210	msgid "Reprocess"
	1211	msgstr ""
	1212
	1213	#: ../src/cmdline.c:242
	1214	#: ../src/cmdline.c:261
	1215	#: n:185
	1216	#, c-format
	1217	msgid "numeric argument “%s” out of range"
	1218	msgstr ""
	1219
	1220	#: ../src/cmdline.c:244
	1221	#: n:186
	1222	#, c-format
	1223	msgid "argument “%s” not an integer"
	1224	msgstr ""
	1225
	1226	#: ../src/cmdline.c:263
	1227	#: n:187
	1228	#, c-format
	1229	msgid "argument “%s” not a number"
	1230	msgstr ""
	1231
[c6a54a8]	1232	#: ../src/commands.c:929
[673a284]	1233	#: n:188
	1234	msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
	1235	msgstr ""
	1236
[c6a54a8]	1237	#: ../src/commands.c:932
[673a284]	1238	#: n:189
	1239	msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
	1240	msgstr ""
	1241
	1242	#: ../src/listpos.c:82
	1243	#: n:190
	1244	#, c-format
	1245	msgid "Station “%s” referred to by entrance or export but never used"
	1246	msgstr ""
	1247
[c6a54a8]	1248	#: ../src/commands.c:675
[673a284]	1249	#: n:192
	1250	msgid "No matching BEGIN"
	1251	msgstr ""
	1252
	1253	#. TRANSLATORS: BEGIN <survey> and END <survey> should have the
	1254	#. same <survey> if it’s given at all
[c6a54a8]	1255	#: ../src/commands.c:703
[673a284]	1256	#: n:193
	1257	msgid "Survey name doesn’t match BEGIN"
	1258	msgstr ""
	1259
	1260	#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
	1261	#. END command omits it, e.g.:
	1262	#.
	1263	#. *begin entrance
	1264	#. 1 2 10.00 178 -01
	1265	#. *end <--[Message given here]
[c6a54a8]	1266	#: ../src/commands.c:712
[673a284]	1267	#: n:194
	1268	msgid "Survey name omitted from END"
	1269	msgstr ""
	1270
	1271	#. TRANSLATORS: Heading line for .pos file. Please try to ensure the “,”s
	1272	#. (or at least the columns) are in the same place
	1273	#: ../src/3dtopos.c:112
	1274	#: n:195
	1275	msgid "( Easting, Northing, Altitude )"
	1276	msgstr ""
	1277
	1278	#. TRANSLATORS: bpp is "Bits Per Pixel"
[8377f15]	1279	#: ../src/aboutdlg.cc:181
[673a284]	1280	#: n:196
	1281	#, c-format
	1282	msgid "Display Depth: %d bpp"
	1283	msgstr ""
	1284
	1285	#. TRANSLATORS: appended to previous message if the display is colour
[8377f15]	1286	#: ../src/aboutdlg.cc:183
[673a284]	1287	#: n:197
	1288	msgid " (colour)"
	1289	msgstr ""
	1290
[31f1db0]	1291	#: ../src/readval.c:512
	1292	#: ../src/readval.c:522
	1293	#: ../src/readval.c:530
[673a284]	1294	#: n:198
	1295	#, c-format
	1296	msgid "Expecting date, found “%s”"
	1297	msgstr ""
	1298
	1299	#. TRANSLATORS: --help output for --survey option.
	1300	#.
	1301	#. "this" has been added to English translation
	1302	#: ../src/3dtopos.c:50
	1303	#: ../src/aven.cc:66
	1304	#: ../src/cad3d.c:660
	1305	#: ../src/diffpos.c:57
	1306	#: ../src/dump3d.c:49
[a7d4233]	1307	#: ../src/extend.c:459
[673a284]	1308	#: n:199
	1309	msgid "only load the sub-survey with this prefix"
	1310	msgstr ""
	1311
	1312	#. TRANSLATORS: --help output for aven --print option
	1313	#: ../src/aven.cc:68
	1314	#: n:119
	1315	msgid "print and exit (requires a 3d file)"
	1316	msgstr ""
	1317
	1318	#. TRANSLATORS: --help output for cavern --percentage option
	1319	#: ../src/cavern.c:125
	1320	#: n:161
	1321	msgid "display percentage progress"
	1322	msgstr ""
	1323
	1324	#. TRANSLATORS: --help output for cavern --output option
	1325	#: ../src/cavern.c:127
	1326	#: n:162
	1327	msgid "set location for output files"
	1328	msgstr ""
	1329
	1330	#. TRANSLATORS: --help output for cavern --quiet option
	1331	#: ../src/cavern.c:129
	1332	#: n:163
	1333	msgid "only show brief summary (-qq for errors only)"
	1334	msgstr ""
	1335
	1336	#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
	1337	#: ../src/cavern.c:131
	1338	#: n:164
	1339	msgid "do not create .err file"
	1340	msgstr ""
	1341
	1342	#. TRANSLATORS: --help output for cavern --warnings-are-errors option
	1343	#: ../src/cavern.c:133
	1344	#: n:165
	1345	msgid "turn warnings into errors"
	1346	msgstr ""
	1347
	1348	#. TRANSLATORS: --help output for cavern --log option
	1349	#: ../src/cavern.c:135
	1350	#: n:170
	1351	msgid "log output to .log file"
	1352	msgstr ""
	1353
	1354	#. TRANSLATORS: --help output for cavern --3d-version option
	1355	#: ../src/cavern.c:137
	1356	#: n:171
	1357	msgid "specify the 3d file format version to output"
	1358	msgstr ""
	1359
	1360	#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
	1361	#. meaningless to say your tape is marked in "0 feet" (but you might
	1362	#. measure distance by counting knots on a diving line, and tie them
	1363	#. every "2 feet").
[c6a54a8]	1364	#: ../src/commands.c:1451
[673a284]	1365	#: n:200
	1366	msgid "*UNITS factor must be non-zero"
	1367	msgstr ""
	1368
[5f69a50]	1369	#: ../src/mainfrm.cc:1473
[673a284]	1370	#: n:202
	1371	#, c-format
	1372	msgid "No survey data in 3d file “%s”"
	1373	msgstr ""
	1374
[5f69a50]	1375	#: ../src/gfxcore.cc:709
[673a284]	1376	#: n:203
	1377	msgid "Facing"
	1378	msgstr ""
	1379
	1380	#. TRANSLATORS: for the title of the About box
[8377f15]	1381	#: ../src/aboutdlg.cc:63
[673a284]	1382	#: n:205
	1383	#, c-format
	1384	msgid "About %s"
	1385	msgstr "Σχετικά %s"
	1386
	1387	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1388	#. - it should be translated to the terminology that cavers using the
	1389	#. language would use.
	1390	#.
	1391	#. File->Open dialog:
[5f69a50]	1392	#: ../src/mainfrm.cc:1979
[673a284]	1393	#: n:206
	1394	msgid "Select a survey file to view"
	1395	msgstr ""
	1396
[a7d4233]	1397	#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
	1398	#. file extension, so neither should be translated.
[5f69a50]	1399	#: ../src/mainfrm.cc:1956
[673a284]	1400	#: n:207
	1401	msgid "Survex 3d files"
	1402	msgstr "Survex 3d αρχεία"
	1403
[5f69a50]	1404	#: ../src/mainfrm.cc:1971
	1405	#: ../src/mainfrm.cc:2422
[c6a54a8]	1406	#: ../src/printwx.cc:667
[673a284]	1407	#: n:208
	1408	msgid "All files"
	1409	msgstr "Όλα τα αρχεία"
	1410
	1411	#. TRANSLATORS: Here "survey" is a "cave map" rather than
	1412	#. list of questions - it should be translated to the
	1413	#. terminology that cavers using the language would use.
[5f69a50]	1414	#: ../src/mainfrm.cc:1953
[673a284]	1415	#: n:229
	1416	msgid "All survey files"
	1417	msgstr ""
	1418
[a7d4233]	1419	#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
	1420	#. file extension, so neither should be translated.
[5f69a50]	1421	#: ../src/mainfrm.cc:1959
[673a284]	1422	#: n:329
	1423	msgid "Survex svx files"
	1424	msgstr "Survex svx αρχεία"
	1425
	1426	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
[a7d4233]	1427	#. surveying package, so should not be translated
[5f69a50]	1428	#: ../src/mainfrm.cc:1967
[673a284]	1429	#: n:330
	1430	msgid "Compass DAT and MAK files"
	1431	msgstr ""
	1432
[c6a54a8]	1433	#: ../src/printwx.cc:311
[673a284]	1434	#: n:411
	1435	msgid "DXF files"
	1436	msgstr "DXF αρχεία"
	1437
[c6a54a8]	1438	#: ../src/printwx.cc:312
[673a284]	1439	#: n:412
	1440	msgid "EPS files"
	1441	msgstr "EPS αρχεία"
	1442
[c6a54a8]	1443	#: ../src/printwx.cc:313
[673a284]	1444	#: n:413
	1445	msgid "GPX files"
	1446	msgstr "GPX αρχεία"
	1447
[a7d4233]	1448	#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
	1449	#. on a (usually large) sheet of paper using a pen mounted in a motorised
	1450	#. mechanism.
[c6a54a8]	1451	#: ../src/printwx.cc:317
[673a284]	1452	#: n:414
	1453	msgid "HPGL for plotters"
	1454	msgstr ""
	1455
[c6a54a8]	1456	#: ../src/printwx.cc:319
[673a284]	1457	#: n:444
	1458	msgid "KML files"
	1459	msgstr "KML αρχεία"
	1460
[a7d4233]	1461	#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
	1462	#. so should not be translated:
	1463	#. http://www.fountainware.com/compass/
	1464	#. http://www.psc-cavers.org/carto/
[c6a54a8]	1465	#: ../src/printwx.cc:324
[673a284]	1466	#: n:415
	1467	msgid "Compass PLT for use with Carto"
	1468	msgstr ""
	1469
[a7d4233]	1470	#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
	1471	#. translated: http://www.skencil.org/
[c6a54a8]	1472	#: ../src/printwx.cc:327
[673a284]	1473	#: n:416
	1474	msgid "Skencil files"
	1475	msgstr "Skencil αρχεία"
	1476
[c6a54a8]	1477	#: ../src/printwx.cc:328
[673a284]	1478	#: n:417
	1479	msgid "SVG files"
	1480	msgstr "SVG αρχεία"
	1481
[c6a54a8]	1482	#: ../src/printwx.cc:318
[31f1db0]	1483	#: n:445
	1484	msgid "JSON files"
[498a7c1]	1485	msgstr "JSON αρχεία"
[31f1db0]	1486
[8377f15]	1487	#. TRANSLATORS: Log files from running cavern (extension .log)
	1488	#: ../src/cavernlog.cc:508
	1489	#: n:447
	1490	msgid "Log files"
	1491	msgstr ""
	1492
[673a284]	1493	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1494	#. - it should be translated to the terminology that cavers using the
	1495	#. language would use.
	1496	#.
	1497	#. This string is used in the about box (summarising the purpose of aven).
[8377f15]	1498	#: ../src/aboutdlg.cc:91
[673a284]	1499	#: n:209
	1500	msgid "Survey visualisation tool"
	1501	msgstr ""
	1502
[a7d4233]	1503	#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
	1504	#. some languages here:
	1505	#. http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
[8377f15]	1506	#: ../src/aboutdlg.cc:105
[673a284]	1507	#: n:219
	1508	msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
	1509	msgstr ""
	1510
	1511	#. TRANSLATORS: Part of 3dtopos --help
	1512	#: ../src/3dtopos.c:86
	1513	#: n:217
	1514	msgid "3D_FILE [POS_FILE]"
	1515	msgstr ""
	1516
	1517	#. TRANSLATORS: Part of diffpos --help
	1518	#: ../src/diffpos.c:265
	1519	#: n:218
	1520	msgid "FILE1 FILE2 [THRESHOLD]"
	1521	msgstr ""
	1522
	1523	#. TRANSLATORS: Part of diffpos --help
	1524	#: ../src/diffpos.c:267
	1525	#: n:255
	1526	#, c-format
	1527	msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
	1528	msgstr ""
	1529
	1530	#. TRANSLATORS: Part of extend --help
[a7d4233]	1531	#: ../src/extend.c:481
[673a284]	1532	#: n:267
	1533	msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
	1534	msgstr ""
	1535
	1536	#. TRANSLATORS: Part of sorterr --help
	1537	#: ../src/sorterr.c:127
	1538	#: n:268
	1539	msgid "ERR_FILE [HOW_MANY]"
	1540	msgstr ""
	1541
	1542	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1543	#. - it should be translated to the terminology that cavers using the
	1544	#. language would use.
	1545	#.
	1546	#. Part of aven --help
	1547	#: ../src/aven.cc:115
	1548	#: ../src/aven.cc:139
	1549	#: n:269
	1550	msgid "[SURVEY_FILE]"
	1551	msgstr ""
	1552
	1553	#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
[a7d4233]	1554	#. are surveys without date information. Try to keep this fairly short.
[5f69a50]	1555	#: ../src/gfxcore.cc:1053
[673a284]	1556	#: n:221
	1557	msgid "Undated"
	1558	msgstr ""
	1559
	1560	#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
[a7d4233]	1561	#. which aren’t part of a loop and so have no error information. Try to keep
	1562	#. this fairly short.
[5f69a50]	1563	#: ../src/gfxcore.cc:1078
[673a284]	1564	#: n:290
	1565	msgid "Not in loop"
	1566	msgstr ""
	1567
	1568	#. TRANSLATORS: error from:
	1569	#.
	1570	#. *data normal newline from to tape compass clino
[c6a54a8]	1571	#: ../src/commands.c:1290
[673a284]	1572	#: n:222
	1573	msgid "NEWLINE can’t be the first reading"
	1574	msgstr ""
	1575
	1576	#. TRANSLATORS: error from:
	1577	#.
	1578	#. *data normal from to tape compass clino newline
[c6a54a8]	1579	#: ../src/commands.c:1333
[673a284]	1580	#: n:223
	1581	msgid "NEWLINE can’t be the last reading"
	1582	msgstr ""
	1583
	1584	#. TRANSLATORS: Error given by something like:
	1585	#.
	1586	#. *data normal station tape compass clino
	1587	#.
	1588	#. ("station" signifies interleaved data).
[c6a54a8]	1589	#: ../src/commands.c:1356
[673a284]	1590	#: n:224
	1591	msgid "Interleaved readings, but no NEWLINE"
	1592	msgstr ""
	1593
	1594	#. TRANSLATORS: caused by e.g.
	1595	#.
	1596	#. *data diving station newline depth tape compass
	1597	#.
	1598	#. ("depth" needs to occur before "newline").
[c6a54a8]	1599	#: ../src/commands.c:1227
[673a284]	1600	#: n:225
	1601	#, c-format
	1602	msgid "Reading “%s” must occur before NEWLINE"
	1603	msgstr ""
	1604
	1605	#. TRANSLATORS: e.g.
	1606	#.
	1607	#. *data normal from to tape newline compass clino
[c6a54a8]	1608	#: ../src/commands.c:1280
[673a284]	1609	#: n:226
	1610	msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
	1611	msgstr ""
	1612
[a7d4233]	1613	#. TRANSLATORS: e.g.
	1614	#.
	1615	#. *calibrate tape compass 1 1
[c6a54a8]	1616	#: ../src/commands.c:1492
[673a284]	1617	#: n:227
	1618	msgid "Can’t calibrate angular and length quantities together"
	1619	msgstr ""
	1620
[c6a54a8]	1621	#: ../src/commands.c:618
[673a284]	1622	#: n:397
	1623	msgid "Bad *alias command"
	1624	msgstr ""
	1625
	1626	#. TRANSLATORS: %s will be replaced by the application name ("Aven"
	1627	#. currently)
	1628	#: ../src/log.cc:32
	1629	#: n:228
	1630	#, c-format
	1631	msgid "%s Error Log"
	1632	msgstr ""
	1633
	1634	#. TRANSLATORS: The text on the action button in the "Export" settings
	1635	#. dialog
[c6a54a8]	1636	#: ../src/printwx.cc:626
[673a284]	1637	#: n:230
	1638	msgid "&Export…"
	1639	msgstr ""
	1640
	1641	#. TRANSLATORS: "Rotation" menu. The accelerators must be different within
	1642	#. this group. Tickable menu item which toggles auto rotation
[5f69a50]	1643	#: ../src/mainfrm.cc:832
[673a284]	1644	#: n:231
	1645	msgid "Au&to-Rotate\tSpace"
	1646	msgstr ""
	1647
[5f69a50]	1648	#: ../src/mainfrm.cc:834
[673a284]	1649	#: n:232
	1650	msgid "Speed &Up"
	1651	msgstr ""
	1652
[5f69a50]	1653	#: ../src/mainfrm.cc:835
[673a284]	1654	#: n:233
	1655	msgid "Slow &Down"
	1656	msgstr ""
	1657
[5f69a50]	1658	#: ../src/mainfrm.cc:837
[673a284]	1659	#: n:234
	1660	msgid "&Reverse Direction"
	1661	msgstr ""
	1662
[5f69a50]	1663	#: ../src/mainfrm.cc:839
[673a284]	1664	#: n:235
	1665	msgid "Step Once &Anticlockwise"
	1666	msgstr ""
	1667
[5f69a50]	1668	#: ../src/mainfrm.cc:840
[673a284]	1669	#: n:236
	1670	msgid "Step Once &Clockwise"
	1671	msgstr ""
	1672
	1673	#. TRANSLATORS: View looking North
[5f69a50]	1674	#: ../src/gfxcore.cc:3396
	1675	#: ../src/mainfrm.cc:843
[673a284]	1676	#: n:240
	1677	msgid "View &North"
	1678	msgstr ""
	1679
	1680	#. TRANSLATORS: View looking East
[5f69a50]	1681	#: ../src/gfxcore.cc:3398
	1682	#: ../src/mainfrm.cc:844
[673a284]	1683	#: n:241
	1684	msgid "View &East"
	1685	msgstr ""
	1686
	1687	#. TRANSLATORS: View looking South
[5f69a50]	1688	#: ../src/gfxcore.cc:3400
	1689	#: ../src/mainfrm.cc:845
[673a284]	1690	#: n:242
	1691	msgid "View &South"
	1692	msgstr ""
	1693
	1694	#. TRANSLATORS: View looking West
[5f69a50]	1695	#: ../src/gfxcore.cc:3402
	1696	#: ../src/mainfrm.cc:846
[673a284]	1697	#: n:243
	1698	msgid "View &West"
	1699	msgstr ""
	1700
	1701	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1702	#. - it should be translated to the terminology that cavers using the
	1703	#. language would use.
[5f69a50]	1704	#: ../src/mainfrm.cc:851
[673a284]	1705	#: n:244
	1706	msgid "Shift Survey &Left"
	1707	msgstr ""
	1708
	1709	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1710	#. - it should be translated to the terminology that cavers using the
	1711	#. language would use.
[5f69a50]	1712	#: ../src/mainfrm.cc:855
[673a284]	1713	#: n:245
	1714	msgid "Shift Survey &Right"
	1715	msgstr ""
	1716
	1717	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1718	#. - it should be translated to the terminology that cavers using the
	1719	#. language would use.
[5f69a50]	1720	#: ../src/mainfrm.cc:859
[673a284]	1721	#: n:246
	1722	msgid "Shift Survey &Up"
	1723	msgstr ""
	1724
	1725	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
	1726	#. - it should be translated to the terminology that cavers using the
	1727	#. language would use.
[5f69a50]	1728	#: ../src/mainfrm.cc:863
[673a284]	1729	#: n:247
	1730	msgid "Shift Survey &Down"
	1731	msgstr ""
	1732
[5f69a50]	1733	#: ../src/gfxcore.cc:3419
	1734	#: ../src/mainfrm.cc:865
[673a284]	1735	#: n:248
	1736	msgid "&Plan View"
	1737	msgstr ""
	1738
[5f69a50]	1739	#: ../src/gfxcore.cc:3420
	1740	#: ../src/mainfrm.cc:866
[673a284]	1741	#: n:249
	1742	msgid "Ele&vation"
	1743	msgstr ""
	1744
[5f69a50]	1745	#: ../src/mainfrm.cc:868
[673a284]	1746	#: n:250
	1747	msgid "&Higher Viewpoint"
	1748	msgstr ""
	1749
[5f69a50]	1750	#: ../src/mainfrm.cc:869
[673a284]	1751	#: n:251
	1752	msgid "L&ower Viewpoint"
	1753	msgstr ""
	1754
[5f69a50]	1755	#: ../src/mainfrm.cc:872
[673a284]	1756	#: n:252
	1757	msgid "&Zoom In\t]"
	1758	msgstr "&Μεγέθυνση\t]"
	1759
[5f69a50]	1760	#: ../src/mainfrm.cc:873
[673a284]	1761	#: n:253
	1762	msgid "Zoo&m Out\t["
	1763	msgstr "&Σμίκρυνση\t["
	1764
[5f69a50]	1765	#: ../src/mainfrm.cc:875
[673a284]	1766	#: n:254
	1767	msgid "Restore De&fault View"
	1768	msgstr ""
	1769
	1770	#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
	1771	#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
	1772	#. the "what to print/export" dialog.
[c6a54a8]	1773	#: ../src/printwx.cc:399
[673a284]	1774	#: n:283
	1775	msgid "View"
	1776	msgstr ""
	1777
	1778	#. TRANSLATORS: Used as a label for the surrounding box for the "survey
	1779	#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
	1780	#. "Elements" isn’t a good name for this but nothing better has yet come to
	1781	#. mind!
[c6a54a8]	1782	#: ../src/printwx.cc:404
[673a284]	1783	#: n:256
	1784	msgid "Elements"
	1785	msgstr ""
	1786
[c6a54a8]	1787	#: ../src/printwx.cc:410
[31f1db0]	1788	#: n:410
	1789	msgid "Export format"
	1790	msgstr ""
	1791
[c6a54a8]	1792	#: ../src/printwx.cc:459
	1793	#: ../src/printwx.cc:839
[673a284]	1794	#: n:257
	1795	#, c-format
	1796	msgid "%d pages (%dx%d)"
	1797	msgstr ""
	1798
	1799	#. TRANSLATORS: used in the scale drop down selector in the print
	1800	#. dialog the implicit meaning is "choose a suitable scale to fit
	1801	#. the plot on a single page", but we need something shorter
[c6a54a8]	1802	#: ../src/printwx.cc:441
	1803	#: ../src/printwx.cc:858
[673a284]	1804	#: n:258
	1805	msgid "One page"
	1806	msgstr ""
	1807
[8377f15]	1808	#: ../src/mainfrm.cc:163
[c6a54a8]	1809	#: ../src/printwx.cc:472
[673a284]	1810	#: n:259
	1811	msgid "Bearing"
	1812	msgstr ""
	1813
[c6a54a8]	1814	#: ../src/printwx.cc:513
[673a284]	1815	#: n:260
	1816	msgid "Station Names"
	1817	msgstr ""
	1818
[c6a54a8]	1819	#: ../src/printwx.cc:509
[673a284]	1820	#: n:261
	1821	msgid "Crosses"
	1822	msgstr ""
	1823
	1824	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	1825	#. "survey stations".
[c6a54a8]	1826	#: ../src/printwx.cc:499
[673a284]	1827	#: n:262
	1828	msgid "Underground Survey Legs"
	1829	msgstr ""
	1830
[c6a54a8]	1831	#: ../src/printwx.cc:529
[673a284]	1832	#: n:393
	1833	msgid "Cross-sections"
	1834	msgstr ""
	1835
[c6a54a8]	1836	#: ../src/printwx.cc:534
[673a284]	1837	#: n:394
	1838	msgid "Walls"
	1839	msgstr ""
	1840
[c6a54a8]	1841	#. TRANSLATORS: Label for checkbox which controls whether there's a
	1842	#. layer in the exported file (for formats such as DXF and SVG)
	1843	#. containing polygons for the inside of cave passages).
	1844	#: ../src/printwx.cc:541
[673a284]	1845	#: n:395
	1846	msgid "Passages"
	1847	msgstr ""
	1848
[c6a54a8]	1849	#: ../src/printwx.cc:545
[673a284]	1850	#: n:421
	1851	msgid "Origin in centre"
	1852	msgstr ""
	1853
[c6a54a8]	1854	#: ../src/printwx.cc:549
[673a284]	1855	#: n:422
	1856	msgid "Full coordinates"
	1857	msgstr ""
	1858
	1859	#. TRANSLATORS: Used in the print dialog:
[c6a54a8]	1860	#: ../src/printwx.cc:479
[673a284]	1861	#: n:263
	1862	msgid "Tilt angle"
	1863	msgstr ""
	1864
	1865	#. TRANSLATORS: used in the print dialog - controls drawing lines
	1866	#. around each page
[c6a54a8]	1867	#: ../src/printwx.cc:557
[673a284]	1868	#: n:264
	1869	msgid "Page Borders"
	1870	msgstr ""
	1871
	1872	#. TRANSLATORS: As in the legend on a map. Used in the print dialog -
	1873	#. controls drawing the box at the lower left with survey name, view
	1874	#. angles, etc
[c6a54a8]	1875	#: ../src/printwx.cc:568
[673a284]	1876	#: n:265
	1877	msgid "Legend"
	1878	msgstr ""
	1879
	1880	#. TRANSLATORS: will be used in the print dialog - check this to print
	1881	#. blank pages (otherwise they’ll be skipped to save paper)
[c6a54a8]	1882	#: ../src/printwx.cc:563
[673a284]	1883	#: n:266
	1884	msgid "Blank Pages"
	1885	msgstr ""
	1886
	1887	#. TRANSLATORS: Items in the "View" menu:
[5f69a50]	1888	#: ../src/mainfrm.cc:892
[673a284]	1889	#: n:270
	1890	msgid "Station &Names\tCtrl+N"
	1891	msgstr ""
	1892
	1893	#. TRANSLATORS: Toggles drawing of 3D passages
[5f69a50]	1894	#: ../src/mainfrm.cc:894
[673a284]	1895	#: n:346
	1896	msgid "Passage &Tubes\tCtrl+T"
	1897	msgstr ""
	1898
[5f69a50]	1899	#: ../src/mainfrm.cc:895
[673a284]	1900	#: n:271
	1901	msgid "&Crosses\tCtrl+X"
	1902	msgstr ""
	1903
[5f69a50]	1904	#: ../src/mainfrm.cc:896
[673a284]	1905	#: n:297
	1906	msgid "&Grid\tCtrl+G"
	1907	msgstr "&Πλέγμα\tCtrl+G"
	1908
[5f69a50]	1909	#: ../src/mainfrm.cc:897
[673a284]	1910	#: n:318
	1911	msgid "&Bounding Box\tCtrl+B"
	1912	msgstr ""
	1913
	1914	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	1915	#. "survey stations".
[5f69a50]	1916	#: ../src/mainfrm.cc:901
[673a284]	1917	#: n:272
	1918	msgid "&Underground Survey Legs\tCtrl+L"
	1919	msgstr ""
	1920
	1921	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	1922	#. "survey stations".
[5f69a50]	1923	#: ../src/mainfrm.cc:904
[673a284]	1924	#: n:291
	1925	msgid "&Surface Survey Legs\tCtrl+F"
	1926	msgstr ""
	1927
[5f69a50]	1928	#: ../src/mainfrm.cc:920
[673a284]	1929	#: n:273
	1930	msgid "&Overlapping Names"
	1931	msgstr ""
	1932
[5f69a50]	1933	#: ../src/gfxcore.cc:3457
	1934	#: ../src/mainfrm.cc:921
[673a284]	1935	#: n:292
	1936	msgid "Colour by &Depth"
	1937	msgstr ""
	1938
[5f69a50]	1939	#: ../src/gfxcore.cc:3458
	1940	#: ../src/mainfrm.cc:922
[673a284]	1941	#: n:293
	1942	msgid "Colour by D&ate"
	1943	msgstr ""
	1944
[5f69a50]	1945	#: ../src/gfxcore.cc:3459
	1946	#: ../src/mainfrm.cc:923
[673a284]	1947	#: n:289
	1948	msgid "Colour by E&rror"
	1949	msgstr ""
	1950
[5f69a50]	1951	#: ../src/gfxcore.cc:3460
	1952	#: ../src/mainfrm.cc:924
[cc9e2c65]	1953	#: n:85
	1954	msgid "Colour by Grad&ient"
	1955	msgstr ""
	1956
[5f69a50]	1957	#: ../src/gfxcore.cc:3461
	1958	#: ../src/mainfrm.cc:925
[69f54b0]	1959	#: n:82
	1960	msgid "Colour by &Length"
	1961	msgstr ""
	1962
[5f69a50]	1963	#: n:448
	1964	msgid "Colour by &Survey"
	1965	msgstr ""
	1966
	1967	#: ../src/mainfrm.cc:927
[673a284]	1968	#: n:294
	1969	msgid "Highlight &Entrances"
	1970	msgstr ""
	1971
[5f69a50]	1972	#: ../src/mainfrm.cc:928
[673a284]	1973	#: n:295
	1974	msgid "Highlight &Fixed Points"
	1975	msgstr ""
	1976
[5f69a50]	1977	#: ../src/mainfrm.cc:929
[673a284]	1978	#: n:296
	1979	msgid "Highlight E&xported Points"
	1980	msgstr ""
	1981
[c6a54a8]	1982	#: ../src/printwx.cc:517
[673a284]	1983	#: n:418
	1984	msgid "Entrances"
	1985	msgstr ""
	1986
[c6a54a8]	1987	#: ../src/printwx.cc:521
[673a284]	1988	#: n:419
	1989	msgid "Fixed Points"
	1990	msgstr ""
	1991
[c6a54a8]	1992	#: ../src/printwx.cc:525
[673a284]	1993	#: n:420
	1994	msgid "Exported Stations"
	1995	msgstr ""
	1996
[5f69a50]	1997	#: ../src/mainfrm.cc:934
[673a284]	1998	#: n:237
	1999	msgid "&Perspective"
	2000	msgstr ""
	2001
[5f69a50]	2002	#: ../src/mainfrm.cc:936
[673a284]	2003	#: n:238
	2004	msgid "Textured &Walls"
	2005	msgstr ""
	2006
	2007	#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
	2008	#. using that term instead if it gives a better translation which most
	2009	#. users will understand.
[5f69a50]	2010	#: ../src/mainfrm.cc:940
[673a284]	2011	#: n:239
	2012	msgid "Fade Distant Ob&jects"
	2013	msgstr ""
	2014
	2015	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	2016	#. "survey stations".
[5f69a50]	2017	#: ../src/mainfrm.cc:943
[673a284]	2018	#: n:298
	2019	msgid "Smoot&hed Survey Legs"
	2020	msgstr ""
	2021
[5f69a50]	2022	#: ../src/mainfrm.cc:949
	2023	#: ../src/mainfrm.cc:953
[673a284]	2024	#: n:356
	2025	msgid "Full Screen &Mode\tF11"
	2026	msgstr ""
	2027
[5f69a50]	2028	#: ../src/mainfrm.cc:967
[673a284]	2029	#: n:274
	2030	msgid "&Compass"
	2031	msgstr ""
	2032
[5f69a50]	2033	#: ../src/mainfrm.cc:968
[673a284]	2034	#: n:275
	2035	msgid "C&linometer"
	2036	msgstr ""
	2037
	2038	#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
	2039	#. corresponds to which depth, date, survey closure error, etc.
[5f69a50]	2040	#: ../src/mainfrm.cc:971
[673a284]	2041	#: n:276
	2042	msgid "Colour &Key"
	2043	msgstr ""
	2044
[5f69a50]	2045	#: ../src/mainfrm.cc:972
[673a284]	2046	#: n:277
	2047	msgid "&Scale Bar"
	2048	msgstr ""
	2049
[5f69a50]	2050	#: ../src/mainfrm.cc:962
[673a284]	2051	#: n:280
	2052	msgid "&Reverse Sense\tCtrl+R"
	2053	msgstr ""
	2054
[5f69a50]	2055	#: ../src/mainfrm.cc:932
	2056	#: ../src/mainfrm.cc:964
[673a284]	2057	#: n:281
	2058	msgid "&Cancel Measuring Line\tEscape"
	2059	msgstr ""
	2060
[5f69a50]	2061	#: ../src/mainfrm.cc:973
[673a284]	2062	#: n:299
	2063	msgid "&Indicators"
	2064	msgstr ""
	2065
	2066	#: ../src/z_getopt.c:697
	2067	#: ../src/z_getopt.c:709
	2068	#: n:300
	2069	#, c-format
	2070	msgid "%s: option “%s” is ambiguous\n"
	2071	msgstr ""
	2072
	2073	#: ../src/z_getopt.c:1025
	2074	#: ../src/z_getopt.c:1036
	2075	#: n:301
	2076	#, c-format
	2077	msgid "%s: option “-W %s” is ambiguous\n"
	2078	msgstr ""
	2079
	2080	#: ../src/z_getopt.c:753
	2081	#: ../src/z_getopt.c:757
	2082	#: n:302
	2083	#, c-format
	2084	msgid "%s: option “%c%s” doesn’t allow an argument\n"
	2085	msgstr ""
	2086
	2087	#: ../src/z_getopt.c:742
	2088	#: ../src/z_getopt.c:745
	2089	#: n:303
	2090	#, c-format
	2091	msgid "%s: option “--%s” doesn’t allow an argument\n"
	2092	msgstr ""
	2093
	2094	#: ../src/z_getopt.c:1060
	2095	#: ../src/z_getopt.c:1071
	2096	#: n:304
	2097	#, c-format
	2098	msgid "%s: option “-W %s” doesn’t allow an argument\n"
	2099	msgstr ""
	2100
	2101	#: ../src/z_getopt.c:792
	2102	#: ../src/z_getopt.c:804
	2103	#: ../src/z_getopt.c:1091
	2104	#: ../src/z_getopt.c:1103
	2105	#: n:305
	2106	#, c-format
	2107	msgid "%s: option “%s” requires an argument\n"
	2108	msgstr ""
	2109
	2110	#: ../src/z_getopt.c:962
	2111	#: ../src/z_getopt.c:973
	2112	#: ../src/z_getopt.c:1156
	2113	#: ../src/z_getopt.c:1168
	2114	#: n:306
	2115	#, c-format
	2116	msgid "%s: option requires an argument -- %c\n"
	2117	msgstr ""
	2118
	2119	#: ../src/z_getopt.c:842
	2120	#: ../src/z_getopt.c:845
	2121	#: n:307
	2122	#, c-format
	2123	msgid "%s: unrecognized option “--%s”\n"
	2124	msgstr ""
	2125
	2126	#: ../src/z_getopt.c:853
	2127	#: ../src/z_getopt.c:856
	2128	#: n:308
	2129	#, c-format
	2130	msgid "%s: unrecognized option “%c%s”\n"
	2131	msgstr ""
	2132
	2133	#: ../src/z_getopt.c:903
	2134	#: ../src/z_getopt.c:906
	2135	#: n:309
	2136	#, c-format
	2137	msgid "%s: illegal option -- %c\n"
	2138	msgstr ""
	2139
	2140	#: ../src/z_getopt.c:912
	2141	#: ../src/z_getopt.c:915
	2142	#: n:310
	2143	#, c-format
	2144	msgid "%s: invalid option -- %c\n"
	2145	msgstr ""
	2146
[5f69a50]	2147	#: ../src/mainfrm.cc:878
[673a284]	2148	#: n:311
	2149	msgid "&New Presentation"
	2150	msgstr ""
	2151
[5f69a50]	2152	#: ../src/mainfrm.cc:879
[673a284]	2153	#: n:312
	2154	msgid "&Open Presentation…"
	2155	msgstr ""
	2156
[5f69a50]	2157	#: ../src/mainfrm.cc:880
[673a284]	2158	#: n:313
	2159	msgid "&Save Presentation"
	2160	msgstr ""
	2161
[5f69a50]	2162	#: ../src/mainfrm.cc:881
[673a284]	2163	#: n:314
	2164	msgid "Sa&ve Presentation As…"
	2165	msgstr ""
	2166
	2167	#. TRANSLATORS: "Mark" as in "Mark this position"
[5f69a50]	2168	#: ../src/mainfrm.cc:884
[673a284]	2169	#: n:315
	2170	msgid "&Mark"
	2171	msgstr ""
	2172
	2173	#. TRANSLATORS: "Play" as in "Play back a recording"
[5f69a50]	2174	#: ../src/mainfrm.cc:886
[673a284]	2175	#: n:316
	2176	msgid "Pla&y"
	2177	msgstr ""
	2178
[5f69a50]	2179	#: ../src/mainfrm.cc:887
[673a284]	2180	#: n:317
	2181	msgid "&Export as Movie…"
	2182	msgstr ""
	2183
[5f69a50]	2184	#: ../src/mainfrm.cc:2499
[673a284]	2185	#: n:331
	2186	msgid "Export Movie"
	2187	msgstr ""
	2188
[8377f15]	2189	#: ../src/cavernlog.cc:511
	2190	#: ../src/mainfrm.cc:371
[673a284]	2191	#: n:319
	2192	msgid "Select an output filename"
	2193	msgstr ""
	2194
[8377f15]	2195	#: ../src/mainfrm.cc:368
[5f69a50]	2196	#: ../src/mainfrm.cc:2421
[673a284]	2197	#: n:320
	2198	msgid "Aven presentations"
	2199	msgstr ""
	2200
	2201	#. TRANSLATORS: title of the save screenshot dialog
[5f69a50]	2202	#: ../src/mainfrm.cc:2007
[673a284]	2203	#: n:321
	2204	msgid "Save Screenshot"
	2205	msgstr ""
	2206
[c6a54a8]	2207	#: ../src/mainfrm.cc:2416
[5f69a50]	2208	#: ../src/mainfrm.cc:2419
[673a284]	2209	#: n:322
	2210	msgid "Select a presentation to open"
	2211	msgstr ""
	2212
[8377f15]	2213	#: ../src/mainfrm.cc:450
[673a284]	2214	#: n:323
	2215	#, c-format
	2216	msgid "Error in format of presentation file “%s”"
	2217	msgstr ""
	2218
	2219	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
	2220	#. surveying package, so probably shouldn’t be translated
[5f69a50]	2221	#: ../src/mainfrm.cc:1963
[673a284]	2222	#: n:324
	2223	msgid "Compass PLT files"
	2224	msgstr ""
	2225
	2226	#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
	2227	#. package, so don’t translate it.
[5f69a50]	2228	#: ../src/mainfrm.cc:1970
[673a284]	2229	#: n:325
	2230	msgid "CMAP XYZ files"
	2231	msgstr ""
	2232
	2233	#. TRANSLATORS: title of message box
[5f69a50]	2234	#: ../src/mainfrm.cc:2070
	2235	#: ../src/mainfrm.cc:2393
	2236	#: ../src/mainfrm.cc:2410
[673a284]	2237	#: n:326
	2238	msgid "Modified Presentation"
	2239	msgstr ""
	2240
	2241	#. TRANSLATORS: and the question in that box
[5f69a50]	2242	#: ../src/mainfrm.cc:2068
	2243	#: ../src/mainfrm.cc:2392
	2244	#: ../src/mainfrm.cc:2409
[673a284]	2245	#: n:327
	2246	msgid "The current presentation has been modified. Abandon unsaved changes?"
	2247	msgstr ""
	2248
[5f69a50]	2249	#: ../src/mainfrm.cc:2710
	2250	#: ../src/mainfrm.cc:2721
[673a284]	2251	#: n:328
	2252	msgid "No matches were found."
	2253	msgstr ""
	2254
	2255	#. TRANSLATORS: "Find stations" button tooltip
[5f69a50]	2256	#: ../src/mainfrm.cc:1048
[673a284]	2257	#: n:332
	2258	msgid "Find"
	2259	msgstr "Αναζήτηση"
	2260
	2261	#. TRANSLATORS: "Hide stations" button default tooltip
[5f69a50]	2262	#: ../src/mainfrm.cc:1050
	2263	#: ../src/mainfrm.cc:2753
[673a284]	2264	#: n:333
	2265	msgid "Hide"
	2266	msgstr ""
	2267
	2268	#. TRANSLATORS: "Hide stations" button tooltip when stations are found
[5f69a50]	2269	#: ../src/mainfrm.cc:2714
[673a284]	2270	#: n:334
	2271	#, c-format
	2272	msgid "Hide %d found stations"
	2273	msgstr ""
	2274
[8377f15]	2275	#: ../src/mainfrm.cc:251
[5f69a50]	2276	#: ../src/mainfrm.cc:2158
	2277	#: ../src/mainfrm.cc:2239
	2278	#: ../src/mainfrm.cc:2291
[673a284]	2279	#: n:335
	2280	msgid "Altitude"
	2281	msgstr ""
	2282
	2283	#. TRANSLATORS: error if you try to drag multiple files to the aven
	2284	#. window
[5f69a50]	2285	#: ../src/mainfrm.cc:734
[673a284]	2286	#: n:336
	2287	msgid "You may only view one 3d file at a time."
	2288	msgstr ""
	2289
[5f69a50]	2290	#: ../src/mainfrm.cc:974
[673a284]	2291	#: n:337
	2292	msgid "&Side Panel"
	2293	msgstr ""
	2294
	2295	#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
	2296	#. Easting)
[5f69a50]	2297	#: ../src/mainfrm.cc:2156
	2298	#: ../src/mainfrm.cc:2178
	2299	#: ../src/mainfrm.cc:2180
	2300	#: ../src/mainfrm.cc:2290
[673a284]	2301	#: n:338
	2302	msgid "%.2f E, %.2f N"
	2303	msgstr ""
	2304
	2305	#. TRANSLATORS: Used in Aven:
	2306	#. From <stationname>
	2307	#. H: 123.45m V: 234.56m
	2308	#. Dist: 456.78m Brg: 200
[5f69a50]	2309	#: ../src/mainfrm.cc:2198
	2310	#: ../src/mainfrm.cc:2248
	2311	#: ../src/mainfrm.cc:2310
[673a284]	2312	#: n:339
	2313	#, c-format
	2314	msgid "From %s"
	2315	msgstr ""
	2316
	2317	#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
[5f69a50]	2318	#: ../src/mainfrm.cc:2323
[673a284]	2319	#: n:340
	2320	#, c-format
	2321	msgid "H %.2f%s, V %.2f%s"
	2322	msgstr ""
	2323
	2324	#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
	2325	#. in Compass bearing)
[5f69a50]	2326	#: ../src/mainfrm.cc:2335
[673a284]	2327	#: n:341
	2328	#, c-format
	2329	msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
	2330	msgstr ""
	2331
[a720caa]	2332	#. TRANSLATORS: tickable menu item in View menu.
[a7d4233]	2333	#.
	2334	#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
[5f69a50]	2335	#: ../src/gfxcore.cc:3448
	2336	#: ../src/gfxcore.cc:3468
	2337	#: ../src/mainfrm.cc:976
[673a284]	2338	#: n:342
	2339	msgid "&Metric"
	2340	msgstr ""
	2341
	2342	#. TRANSLATORS: tickable menu item in View menu.
	2343	#.
	2344	#. Degrees are the angular measurement where there are 360 in a full
	2345	#. circle.
[5f69a50]	2346	#: ../src/gfxcore.cc:3410
	2347	#: ../src/gfxcore.cc:3428
	2348	#: ../src/gfxcore.cc:3470
	2349	#: ../src/mainfrm.cc:977
[673a284]	2350	#: n:343
	2351	msgid "&Degrees"
	2352	msgstr ""
	2353
	2354	#. TRANSLATORS: tickable menu item in View menu.
	2355	#.
	2356	#. Show the tilt of the survey as a percentage gradient (100% = 45
	2357	#. degrees = 50 grad).
[5f69a50]	2358	#: ../src/gfxcore.cc:3433
	2359	#: ../src/mainfrm.cc:978
[673a284]	2360	#: n:430
	2361	msgid "&Percent"
	2362	msgstr ""
	2363
	2364	#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
	2365	#. used e.g. "5km".
	2366	#.
	2367	#. If there should be a space between the number and this, include
	2368	#. one in the translation.
[5f69a50]	2369	#: ../src/gfxcore.cc:1188
[c6a54a8]	2370	#: ../src/printwx.cc:1138
[673a284]	2371	#: n:423
	2372	msgid "km"
	2373	msgstr ""
	2374
	2375	#. TRANSLATORS: abbreviation for "metres" (unit of length), used
	2376	#. e.g. "10m".
	2377	#.
	2378	#. If there should be a space between the number and this, include
	2379	#. one in the translation.
[c6a54a8]	2380	#: ../src/commands.c:305
[5f69a50]	2381	#: ../src/gfxcore.cc:1023
	2382	#: ../src/gfxcore.cc:1115
	2383	#: ../src/gfxcore.cc:1195
	2384	#: ../src/mainfrm.cc:2147
	2385	#: ../src/mainfrm.cc:2214
	2386	#: ../src/mainfrm.cc:2234
	2387	#: ../src/mainfrm.cc:2283
	2388	#: ../src/mainfrm.cc:2314
[c6a54a8]	2389	#: ../src/printwx.cc:1140
[673a284]	2390	#: n:424
	2391	msgid "m"
	2392	msgstr ""
	2393
	2394	#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
	2395	#. used e.g. "50cm".
	2396	#.
	2397	#. If there should be a space between the number and this, include
	2398	#. one in the translation.
[5f69a50]	2399	#: ../src/gfxcore.cc:1203
[c6a54a8]	2400	#: ../src/printwx.cc:1143
[673a284]	2401	#: n:425
	2402	msgid "cm"
	2403	msgstr ""
	2404
	2405	#. TRANSLATORS: abbreviation for "miles" (unit of length,
	2406	#. plural), used e.g. "2 miles".
	2407	#.
	2408	#. If there should be a space between the number and this,
	2409	#. include one in the translation.
[5f69a50]	2410	#: ../src/gfxcore.cc:1216
[673a284]	2411	#: n:426
	2412	msgid " miles"
	2413	msgstr ""
	2414
	2415	#. TRANSLATORS: abbreviation for "mile" (unit of length,
	2416	#. singular), used e.g. "1 mile".
	2417	#.
	2418	#. If there should be a space between the number and this,
	2419	#. include one in the translation.
[5f69a50]	2420	#: ../src/gfxcore.cc:1223
[673a284]	2421	#: n:427
	2422	msgid " mile"
	2423	msgstr ""
	2424
	2425	#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
	2426	#. as "10ft".
	2427	#.
	2428	#. If there should be a space between the number and this, include
	2429	#. one in the translation.
[c6a54a8]	2430	#: ../src/commands.c:306
[5f69a50]	2431	#: ../src/gfxcore.cc:1023
	2432	#: ../src/gfxcore.cc:1115
	2433	#: ../src/gfxcore.cc:1231
	2434	#: ../src/mainfrm.cc:2152
	2435	#: ../src/mainfrm.cc:2217
	2436	#: ../src/mainfrm.cc:2237
	2437	#: ../src/mainfrm.cc:2288
	2438	#: ../src/mainfrm.cc:2319
[673a284]	2439	#: n:428
	2440	msgid "ft"
	2441	msgstr "πόδια"
	2442
	2443	#. TRANSLATORS: abbreviation for "inches" (unit of length), used
	2444	#. e.g. as "6in".
	2445	#.
	2446	#. If there should be a space between the number and this, include
	2447	#. one in the translation.
[5f69a50]	2448	#: ../src/gfxcore.cc:1239
[673a284]	2449	#: n:429
	2450	msgid "in"
	2451	msgstr ""
	2452
	2453	#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
[5f69a50]	2454	#: ../src/gfxcore.cc:3405
[673a284]	2455	#: n:387
	2456	msgid "&Hide Compass"
	2457	msgstr ""
	2458
	2459	#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
[5f69a50]	2460	#: ../src/gfxcore.cc:3423
[673a284]	2461	#: n:384
	2462	msgid "&Hide Clino"
	2463	msgstr ""
	2464
	2465	#. TRANSLATORS: Menu item which turns off the scale bar in aven.
[5f69a50]	2466	#: ../src/gfxcore.cc:3443
[673a284]	2467	#: n:385
	2468	msgid "&Hide scale bar"
	2469	msgstr ""
	2470
	2471	#. TRANSLATORS: Menu item which turns off the colour key.
	2472	#. The "Colour Key" is the thing in aven showing which colour
	2473	#. corresponds to which depth, date, survey closure error, etc.
[5f69a50]	2474	#: ../src/gfxcore.cc:3466
[673a284]	2475	#: n:386
	2476	msgid "&Hide colour key"
	2477	msgstr ""
	2478
	2479	#. TRANSLATORS: degree symbol - probably should be translated to
	2480	#. itself.
[c6a54a8]	2481	#: ../src/commands.c:308
[5f69a50]	2482	#: ../src/gfxcore.cc:698
	2483	#: ../src/gfxcore.cc:773
	2484	#: ../src/gfxcore.cc:1087
	2485	#: ../src/mainfrm.cc:2201
	2486	#: ../src/mainfrm.cc:2327
[c6a54a8]	2487	#: ../src/printwx.cc:89
[673a284]	2488	#: n:344
	2489	msgid "°"
	2490	msgstr ""
	2491
	2492	#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
	2493	#. circle).
[c6a54a8]	2494	#: ../src/commands.c:309
[5f69a50]	2495	#: ../src/gfxcore.cc:703
	2496	#: ../src/gfxcore.cc:778
	2497	#: ../src/gfxcore.cc:1087
[673a284]	2498	#: n:76
	2499	msgid "ᵍ"
	2500	msgstr ""
	2501
	2502	#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
	2503	#. full circle). Try to make this as short as sensibly possible.
	2504	#.
	2505	#. E.g. in Italian and Spanish we use "g.cent." rather than
	2506	#. "gradi quattrocentesimali"/"grados centesimales"
[5f69a50]	2507	#: ../src/mainfrm.cc:2209
	2508	#: ../src/mainfrm.cc:2330
[673a284]	2509	#: n:345
	2510	msgid "grad"
	2511	msgstr ""
	2512
	2513	#. TRANSLATORS: symbol for percentage gradient (100% = 45
	2514	#. degrees = 50 grad).
[c6a54a8]	2515	#: ../src/commands.c:310
[5f69a50]	2516	#: ../src/gfxcore.cc:764
	2517	#: ../src/gfxcore.cc:782
[673a284]	2518	#: n:96
	2519	msgid "%"
	2520	msgstr ""
	2521
[a7d4233]	2522	#. TRANSLATORS: infinity symbol - used for the percentage gradient on
[673a284]	2523	#. vertical angles.
[5f69a50]	2524	#: ../src/gfxcore.cc:758
[673a284]	2525	#: n:431
	2526	msgid "∞"
	2527	msgstr ""
	2528
[31f1db0]	2529	#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
	2530	#. in Compass bearing)
[5f69a50]	2531	#: ../src/mainfrm.cc:2221
[31f1db0]	2532	#: n:374
	2533	#, c-format
	2534	msgid "%s: H %.2f%s, Brg %03d%s"
	2535	msgstr ""
[673a284]	2536
[31f1db0]	2537	#. TRANSLATORS: "V" is short for "Vertical"
[5f69a50]	2538	#: ../src/mainfrm.cc:2254
[31f1db0]	2539	#: n:375
	2540	#, c-format
	2541	msgid "%s: V %.2f%s"
	2542	msgstr ""
[673a284]	2543
[31f1db0]	2544	#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
	2545	#. tree hierarchy of survey station names
[5f69a50]	2546	#: ../src/mainfrm.cc:1098
[31f1db0]	2547	#: n:376
	2548	msgid "Surveys"
	2549	msgstr ""
[673a284]	2550
[5f69a50]	2551	#: ../src/mainfrm.cc:1099
[31f1db0]	2552	#: n:377
	2553	msgid "Presentation"
	2554	msgstr ""
[673a284]	2555
[8377f15]	2556	#: ../src/mainfrm.cc:249
[673a284]	2557	#: n:378
	2558	msgid "Easting"
	2559	msgstr ""
	2560
[8377f15]	2561	#: ../src/mainfrm.cc:250
[673a284]	2562	#: n:379
	2563	msgid "Northing"
	2564	msgstr ""
	2565
[8377f15]	2566	#. TRANSLATORS: Aven menu items. An “&” goes before the letter of any
	2567	#. accelerator key.
	2568	#.
	2569	#. The string "\t" separates the menu text and any accelerator key.
	2570	#.
	2571	#. "File" menu. The accelerators must be different within this group.
	2572	#. c.f. 201, 380, 381.
[5f69a50]	2573	#: ../src/mainfrm.cc:803
[8377f15]	2574	#: n:220
	2575	msgid "&Open…\tCtrl+O"
	2576	msgstr "&Άνοιγμα…\tCtrl+O"
	2577
[5f69a50]	2578	#: ../src/mainfrm.cc:804
[8377f15]	2579	#: n:144
	2580	msgid "Show &Log"
	2581	msgstr ""
	2582
[5f69a50]	2583	#: ../src/mainfrm.cc:807
[673a284]	2584	#: n:380
	2585	msgid "&Print…\tCtrl+P"
	2586	msgstr "&Εκτύπωση…\tCtrl+P"
	2587
[5f69a50]	2588	#: ../src/mainfrm.cc:808
[673a284]	2589	#: n:381
	2590	msgid "P&age Setup…"
	2591	msgstr ""
	2592
[8377f15]	2593	#. TRANSLATORS: In the "File" menu
[5f69a50]	2594	#: ../src/mainfrm.cc:811
[8377f15]	2595	#: n:201
	2596	msgid "&Screenshot…"
	2597	msgstr ""
	2598
[5f69a50]	2599	#: ../src/mainfrm.cc:812
[673a284]	2600	#: n:382
	2601	msgid "&Export as…"
	2602	msgstr ""
	2603
	2604	#. TRANSLATORS: Title of file dialog to choose name and type of exported
	2605	#. file.
[c6a54a8]	2606	#: ../src/printwx.cc:673
[673a284]	2607	#: n:401
	2608	msgid "Export as:"
	2609	msgstr ""
	2610
	2611	#. TRANSLATORS: Title of the export
	2612	#. dialog
[c6a54a8]	2613	#: ../src/printwx.cc:346
[673a284]	2614	#: n:383
	2615	msgid "Export"
	2616	msgstr ""
	2617
	2618	#. TRANSLATORS: for about box:
[8377f15]	2619	#: ../src/aboutdlg.cc:142
[673a284]	2620	#: n:390
	2621	msgid "System Information:"
	2622	msgstr ""
	2623
	2624	#. TRANSLATORS: Title of the print preview dialog
[c6a54a8]	2625	#: ../src/printwx.cc:710
[673a284]	2626	#: n:398
	2627	msgid "Print Preview"
	2628	msgstr "Προεπισκόπηση Εκτύπωσης"
	2629
	2630	#. TRANSLATORS: Title of the print
	2631	#. dialog
[c6a54a8]	2632	#: ../src/printwx.cc:343
[673a284]	2633	#: n:399
	2634	msgid "Print"
	2635	msgstr "Εκτύπωση"
	2636
[c6a54a8]	2637	#: ../src/printwx.cc:621
[673a284]	2638	#: n:400
	2639	msgid "&Print…"
	2640	msgstr "&Εκτύπωση…"
	2641
	2642	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	2643	#. "survey stations".
[c6a54a8]	2644	#: ../src/printwx.cc:505
[673a284]	2645	#: n:403
	2646	msgid "Sur&face Survey Legs"
	2647	msgstr ""
	2648
	2649	#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
[8377f15]	2650	#: ../src/mainfrm.cc:136
[673a284]	2651	#: n:404
	2652	msgid "Edit Waypoint"
	2653	msgstr ""
	2654
	2655	#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
	2656	#. in a presentation.
[8377f15]	2657	#: ../src/mainfrm.cc:175
[673a284]	2658	#: n:278
	2659	msgid " (unused in perspective view)"
	2660	msgstr ""
	2661
	2662	#. TRANSLATORS: Field label in dialog to edit a waypoint in a
	2663	#. presentation.
[8377f15]	2664	#: ../src/mainfrm.cc:182
[673a284]	2665	#: n:279
	2666	msgid "Time: "
	2667	msgstr ""
	2668
	2669	#. TRANSLATORS: units+info after time field in dialog to edit a
	2670	#. waypoint in a presentation.
[8377f15]	2671	#: ../src/mainfrm.cc:186
[673a284]	2672	#: n:282
	2673	msgid " secs (0 = auto; *6 = 6 times auto)"
	2674	msgstr ""
	2675
	2676	#. TRANSLATORS: %s will be replaced with "Aven" currently (and
	2677	#. perhaps by "Survex" or other things in future).
	2678	#: ../src/aven.cc:230
	2679	#: n:405
	2680	#, c-format
	2681	msgid "This version of %s requires OpenGL to work, but it isn’t available."
	2682	msgstr ""
	2683
[8377f15]	2684	#: ../src/readval.c:341
	2685	#: n:392
	2686	msgid "Separator in survey name"
[673a284]	2687	msgstr ""
	2688
[8377f15]	2689	#. TRANSLATORS: Used in place of the station name when talking about an
	2690	#. anonymous station.
	2691	#: ../src/labelinfo.h:82
	2692	#: n:56
	2693	msgid "anonymous station"
[673a284]	2694	msgstr ""
	2695
[8377f15]	2696	#: ../src/readval.c:124
	2697	#: ../src/readval.c:139
	2698	#: ../src/readval.c:156
	2699	#: n:3
	2700	msgid "Can't have a leg between two anonymous stations"
	2701	msgstr ""
	2702
[5f69a50]	2703	#: ../src/mainfrm.cc:917
[8377f15]	2704	#: n:406
	2705	msgid "Spla&y Legs"
	2706	msgstr ""
	2707
[c6a54a8]	2708	#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
	2709	#. splay legs are not shown.
[5f69a50]	2710	#: ../src/mainfrm.cc:909
[8377f15]	2711	#: n:407
	2712	msgid "&Hide"
	2713	msgstr ""
	2714
[c6a54a8]	2715	#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
	2716	#. aven will show splay legs with less bright colours (rather than the
	2717	#. same as other legs "Show" or not shown "Hide").
[5f69a50]	2718	#: ../src/mainfrm.cc:913
[8377f15]	2719	#: n:408
	2720	msgid "&Fade"
	2721	msgstr ""
	2722
[c6a54a8]	2723	#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
	2724	#. splay legs are shown the same as other legs.
[5f69a50]	2725	#: ../src/mainfrm.cc:916
[8377f15]	2726	#: n:409
	2727	msgid "&Show"
	2728	msgstr "&Εμφάνιση"
	2729
	2730	#: ../src/extend.c:507
	2731	#: n:105
	2732	msgid "Reading in data - please wait…"
[673a284]	2733	msgstr ""
	2734
	2735	#. TRANSLATORS: for extend: the user specified breaking a loop or
	2736	#. changing extend direction at this station, but we didn’t find it in
	2737	#. the 3d file
[a7d4233]	2738	#: ../src/extend.c:263
	2739	#: ../src/extend.c:281
	2740	#: ../src/extend.c:326
	2741	#: ../src/extend.c:368
	2742	#: ../src/extend.c:410
[673a284]	2743	#: n:510
	2744	#, c-format
	2745	msgid "Failed to find station %s"
	2746	msgstr ""
	2747
	2748	#. TRANSLATORS: for extend: the user specified breaking a loop or
	2749	#. changing extend direction at this leg, but we didn’t find it in the
	2750	#. 3d file
[a7d4233]	2751	#: ../src/extend.c:307
	2752	#: ../src/extend.c:349
	2753	#: ../src/extend.c:391
	2754	#: ../src/extend.c:433
[673a284]	2755	#: n:511
	2756	#, c-format
	2757	msgid "Failed to find leg %s → %s"
	2758	msgstr ""
	2759
	2760	#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
[a7d4233]	2761	#: ../src/extend.c:254
[673a284]	2762	#: n:512
	2763	#, c-format
	2764	msgid "Starting from station %s"
	2765	msgstr ""
	2766
	2767	#. TRANSLATORS: for extend:
[a7d4233]	2768	#: ../src/extend.c:274
[673a284]	2769	#: n:513
	2770	#, c-format
	2771	msgid "Extending to the left from station %s"
	2772	msgstr ""
	2773
	2774	#. TRANSLATORS: for extend:
[a7d4233]	2775	#: ../src/extend.c:319
[673a284]	2776	#: n:514
	2777	#, c-format
	2778	msgid "Extending to the right from station %s"
	2779	msgstr ""
	2780
	2781	#. TRANSLATORS: for extend:
[a7d4233]	2782	#: ../src/extend.c:294
[673a284]	2783	#: n:515
	2784	#, c-format
	2785	msgid "Extending to the left from leg %s → %s"
	2786	msgstr ""
	2787
	2788	#. TRANSLATORS: for extend:
[a7d4233]	2789	#: ../src/extend.c:339
[673a284]	2790	#: n:516
	2791	#, c-format
	2792	msgid "Extending to the right from leg %s → %s"
	2793	msgstr ""
	2794
	2795	#. TRANSLATORS: for extend:
[a7d4233]	2796	#: ../src/extend.c:403
[673a284]	2797	#: n:517
	2798	#, c-format
	2799	msgid "Breaking survey loop at station %s"
	2800	msgstr ""
	2801
	2802	#. TRANSLATORS: for extend:
[a7d4233]	2803	#: ../src/extend.c:423
[673a284]	2804	#: n:518
	2805	#, c-format
	2806	msgid "Breaking survey loop at leg %s → %s"
	2807	msgstr ""
	2808
	2809	#. TRANSLATORS: for extend:
[a7d4233]	2810	#: ../src/extend.c:361
[673a284]	2811	#: n:519
	2812	#, c-format
	2813	msgid "Swapping extend direction from station %s"
	2814	msgstr ""
	2815
	2816	#. TRANSLATORS: for extend:
[a7d4233]	2817	#: ../src/extend.c:381
[673a284]	2818	#: n:520
	2819	#, c-format
	2820	msgid "Swapping extend direction from leg %s → %s"
	2821	msgstr ""
	2822
	2823	#. TRANSLATORS: for extend:
[a7d4233]	2824	#: ../src/extend.c:551
[673a284]	2825	#: n:521
	2826	#, c-format
	2827	msgid "Applying specfile: “%s”"
	2828	msgstr ""
	2829
	2830	#. TRANSLATORS: for extend:
	2831	#. Used to tell the user that a file is being written - %s is the filename
[a7d4233]	2832	#: ../src/extend.c:614
[673a284]	2833	#: n:522
	2834	#, c-format
	2835	msgid "Writing %s…"
	2836	msgstr ""
	2837
[8377f15]	2838	#. TRANSLATORS: --help output for sorterr --horizontal option
	2839	#: ../src/sorterr.c:53
	2840	#: n:179
	2841	msgid "sort by horizontal error factor"
	2842	msgstr ""
	2843
	2844	#. TRANSLATORS: --help output for sorterr --vertical option
	2845	#: ../src/sorterr.c:55
	2846	#: n:180
	2847	msgid "sort by vertical error factor"
	2848	msgstr ""
	2849
	2850	#. TRANSLATORS: --help output for sorterr --percentage option
	2851	#: ../src/sorterr.c:57
	2852	#: n:181
	2853	msgid "sort by percentage error"
	2854	msgstr ""
	2855
	2856	#. TRANSLATORS: --help output for sorterr --per-leg option
	2857	#: ../src/sorterr.c:59
	2858	#: n:182
	2859	msgid "sort by error per leg"
	2860	msgstr ""
	2861
	2862	#. TRANSLATORS: --help output for sorterr --replace option
	2863	#: ../src/sorterr.c:61
	2864	#: n:183
	2865	msgid "replace .err file with resorted version"
	2866	msgstr ""
	2867
	2868	#: ../src/sorterr.c:81
	2869	#: ../src/sorterr.c:98
	2870	#: ../src/sorterr.c:170
	2871	#: n:112
	2872	msgid "Couldn’t parse .err file"
	2873	msgstr ""
	2874
	2875	#. TRANSLATORS: for diffpos:
	2876	#: ../src/diffpos.c:159
	2877	#: n:500
	2878	#, c-format
	2879	msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
	2880	msgstr ""
	2881
	2882	#. TRANSLATORS: for diffpos:
	2883	#: ../src/diffpos.c:196
	2884	#: n:501
	2885	#, c-format
	2886	msgid "Added: %s"
	2887	msgstr ""
	2888
	2889	#. TRANSLATORS: for diffpos:
	2890	#: ../src/diffpos.c:219
	2891	#: n:502
	2892	#, c-format
	2893	msgid "Deleted: %s"
	2894	msgstr ""
	2895
	2896	#. TRANSLATORS: Program will exit shortly after printing this
	2897	#: ../src/message.c:227
	2898	#: n:90
	2899	msgid "Abnormal termination"
	2900	msgstr ""
	2901
	2902	#: ../src/message.c:228
	2903	#: n:91
	2904	msgid "Arithmetic error"
	2905	msgstr ""
	2906
	2907	#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
	2908	#. opcodes -- corrupted program?
	2909	#: ../src/message.c:231
	2910	#: n:92
	2911	msgid "Illegal instruction"
	2912	msgstr ""
	2913
	2914	#: ../src/message.c:232
	2915	#: n:94
	2916	msgid "Bad memory access"
	2917	msgstr ""
	2918
	2919	#: ../src/message.c:233
	2920	#: n:97
	2921	msgid "Unknown signal received"
	2922	msgstr ""
	2923
	2924	#. TRANSLATORS: e.g.
	2925	#.
	2926	#. *begin crawl
	2927	#. 1 2 9.45 234 -01
	2928	#. *end crawl
	2929	#. *begin crawl # <- warning here
	2930	#. 2 3 7.67 223 -03
	2931	#. *end crawl
	2932	#.
	2933	#. If you're unsure what "deprecated" means, see:
	2934	#. http://en.wikipedia.org/wiki/Deprecation
[c6a54a8]	2935	#: ../src/commands.c:566
[8377f15]	2936	#: n:29
	2937	msgid "Reentering an existing survey is deprecated"
	2938	msgstr ""
	2939
[c6a54a8]	2940	#: ../src/commands.c:567
[8377f15]	2941	#: n:30
	2942	msgid "Originally entered here"
	2943	msgstr ""
	2944
	2945	#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
	2946	#. deprecated, so this error would be generated by:
	2947	#.
	2948	#. *equate \foo.7 1
	2949	#.
	2950	#. If you're unsure what "deprecated" means, see:
	2951	#. http://en.wikipedia.org/wiki/Deprecation
[c6a54a8]	2952	#: ../src/commands.c:492
[8377f15]	2953	#: ../src/readval.c:90
	2954	#: ../src/readval.c:94
	2955	#: n:25
	2956	msgid "ROOT is deprecated"
	2957	msgstr ""
	2958
	2959	#. TRANSLATORS: --help output for dump3d --rewind option
	2960	#: ../src/dump3d.c:51
	2961	#: n:204
	2962	msgid "rewind file and read it a second time"
	2963	msgstr ""
	2964
	2965	#: ../src/dump3d.c:52
	2966	#: n:396
	2967	msgid "show survey date information (if present)"
	2968	msgstr ""
	2969
[673a284]	2970	#: ../src/findentrances.cc:100
	2971	#: ../src/gpx.cc:70
	2972	#: ../src/kml.cc:69
	2973	#: n:287
	2974	#, c-format
	2975	msgid "Failed to initialise input coordinate system “%s”"
	2976	msgstr ""
	2977
	2978	#: ../src/findentrances.cc:103
	2979	#: ../src/gpx.cc:75
	2980	#: ../src/kml.cc:74
	2981	#: n:288
	2982	#, c-format
	2983	msgid "Failed to initialise output coordinate system “%s”"
	2984	msgstr ""
	2985
	2986	#: ../src/findentrances.cc:158
	2987	#: n:388
	2988	msgid "-d PROJ_DATUM 3D_FILE"
	2989	msgstr ""
	2990
	2991	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
	2992	#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
	2993	#. what the input datum is.
	2994	#: ../src/findentrances.cc:149
	2995	#: n:389
	2996	msgid "input datum as string to pass to PROJ"
	2997	msgstr ""
	2998
	2999	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
	3000	#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
	3001	#. of the coordinate projection in use, the user must specify it here for
	3002	#. export formats which need to know it (e.g. GPX).
[c6a54a8]	3003	#: ../src/printwx.cc:582
[673a284]	3004	#: n:440
	3005	msgid "Coordinate projection"
	3006	msgstr ""
	3007
[31f1db0]	3008	#: ../src/cad3d.c:661
	3009	#: n:100
	3010	msgid "do not generate station markers"
	3011	msgstr ""
	3012
	3013	#: ../src/cad3d.c:662
	3014	#: n:101
	3015	msgid "do not generate station labels"
	3016	msgstr ""
	3017
	3018	#: ../src/cad3d.c:663
	3019	#: n:102
	3020	msgid "do not generate survey legs"
	3021	msgstr ""
	3022
	3023	#: ../src/cad3d.c:667
	3024	#: n:103
	3025	msgid "produce an elevation view"
	3026	msgstr ""
	3027
	3028	#: ../src/cad3d.c:664
	3029	#: n:148
	3030	#, c-format
	3031	msgid "generate grid (default %sm)"
	3032	msgstr ""
	3033
	3034	#: ../src/cad3d.c:665
	3035	#: n:149
	3036	#, c-format
	3037	msgid "station labels text height (default %s)"
	3038	msgstr ""
	3039
	3040	#: ../src/cad3d.c:666
	3041	#: n:152
	3042	#, c-format
	3043	msgid "station marker size (default %s)"
	3044	msgstr ""
	3045
	3046	#: ../src/cad3d.c:668
	3047	#: n:155
	3048	#, c-format
	3049	msgid "factor to scale down by (default %s)"
	3050	msgstr ""
	3051
	3052	#: ../src/cad3d.c:669
	3053	#: n:156
	3054	msgid "produce DXF output"
	3055	msgstr ""
	3056
	3057	#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
	3058	#. translated.
	3059	#: ../src/cad3d.c:672
	3060	#: n:158
	3061	msgid "produce Skencil output"
	3062	msgstr ""
	3063
	3064	#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
	3065	#. so should not be translated.
	3066	#: ../src/cad3d.c:675
	3067	#: n:159
	3068	msgid "produce Compass PLT output for Carto"
	3069	msgstr ""
	3070
	3071	#: ../src/cad3d.c:676
	3072	#: n:160
	3073	msgid "produce SVG output"
[673a284]	3074	msgstr ""
[31f1db0]	3075
	3076	#, c-format
	3077	#~ msgid "Error in format of font file “%s”"
	3078	#~ msgstr ""
	3079
	3080	#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
	3081	#. height values).
	3082	#~ msgid "Select a terrain file to view"
	3083	#~ msgstr ""
	3084
	3085	#~ msgid "Terrain files"
	3086	#~ msgstr ""
	3087
	3088	#~ msgid "Open &Terrain…"
	3089	#~ msgstr ""
	3090
	3091	#~ msgid "Solid Su&rface"
	3092	#~ msgstr ""
	3093
	3094	#. TRANSLATORS: number of stations found matching search
	3095	#, c-format
	3096	#~ msgid "%d found"
	3097	#~ msgstr ""
	3098
[5f69a50]	3099	#: ../src/mainfrm.cc:957
[31f1db0]	3100	#: n:347
	3101	#~ msgid "&Preferences…"
	3102	#~ msgstr ""
	3103
	3104	#: n:348
	3105	#~ msgid "Draw passage walls"
	3106	#~ msgstr ""
	3107
	3108	#: n:349
	3109	#~ msgid "Estimate LRUD readings based on heuristics"
	3110	#~ msgstr ""
	3111
	3112	#: n:350
	3113	#~ msgid "Mark survey stations with crosses"
	3114	#~ msgstr ""
	3115
	3116	#: n:351
	3117	#~ msgid "Highlight stations marked as entrances"
	3118	#~ msgstr ""
	3119
	3120	#: n:352
	3121	#~ msgid "Highlight stations marked as fixed points"
	3122	#~ msgstr ""
	3123
	3124	#: n:353
	3125	#~ msgid "Highlight stations which are exported"
	3126	#~ msgstr ""
	3127
	3128	#: n:354
	3129	#~ msgid "Mark survey stations with their names"
	3130	#~ msgstr ""
	3131
	3132	#: n:355
	3133	#~ msgid "Allow names to overlap on the display (faster)"
	3134	#~ msgstr ""
	3135
	3136	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	3137	#. "survey stations".
	3138	#: n:357
	3139	#~ msgid "Display underground survey legs"
	3140	#~ msgstr ""
	3141
	3142	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
	3143	#. "survey stations".
	3144	#: n:358
	3145	#~ msgid "Display surface survey legs"
	3146	#~ msgstr ""
	3147
	3148	#: n:359
	3149	#~ msgid "Colour surface surveys by depth"
	3150	#~ msgstr ""
	3151
	3152	#: n:360
	3153	#~ msgid "Draw surface legs with dashed lines"
	3154	#~ msgstr ""
	3155
	3156	#: n:361
	3157	#~ msgid "Draw a grid"
	3158	#~ msgstr ""
	3159
	3160	#: n:362
	3161	#~ msgid "metric units"
	3162	#~ msgstr ""
	3163
	3164	#. TRANSLATORS: Miles, Feet, Inches, etc. What they call "English units" in
	3165	#. the USA (rather confusingly now that England has largely gone metric!)
	3166	#: n:363
	3167	#~ msgid "imperial units"
	3168	#~ msgstr ""
	3169
	3170	#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
	3171	#. full circle.
	3172	#: n:364
	3173	#~ msgid "degrees (°)"
	3174	#~ msgstr ""
	3175
	3176	#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
	3177	#. full circle.
	3178	#: n:365
	3179	#~ msgid "grads"
	3180	#~ msgstr ""
	3181
	3182	#: n:366
	3183	#~ msgid "Display measurements in"
	3184	#~ msgstr ""
	3185
	3186	#: n:367
	3187	#~ msgid "Display angles in"
	3188	#~ msgstr ""
	3189
	3190	#. TRANSLATORS: reverses the sense of the mouse controls
	3191	#: n:368
	3192	#~ msgid "Reverse the sense of the controls"
	3193	#~ msgstr ""
	3194
	3195	#: n:369
	3196	#~ msgid "Display scale bar"
	3197	#~ msgstr ""
	3198
	3199	#: n:370
	3200	#~ msgid "Display depth bar"
	3201	#~ msgstr ""
	3202
	3203	#: n:371
	3204	#~ msgid "Display compass"
	3205	#~ msgstr ""
	3206
	3207	#: n:372
	3208	#~ msgid "Display clinometer"
	3209	#~ msgstr ""
	3210
	3211	#: n:373
	3212	#~ msgid "Display side panel"
	3213	#~ msgstr ""

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format