source: git/lib/de.po@ 45af761

msgid ""
msgstr ""
"Project-Id-Version: survex-1.1.16\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2011-05-17 01:20:59 +1200\n"
"Last-Translator: Olly Betts <olly@survex.com>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
#. allocate space for.
#: ../src/message.c:83
#, c-format
msgid "Out of memory (couldn't find %lu bytes)."
msgstr "Zuwenig Speicherplatz (konnte %lu Bytes nicht finden)."

#. TRANSLATORS: de: Gerhard: (this replaces the idea of "greater" with "newer" because it
#. sounds more natural.  Feel free to write "höher" instead of "neuer", but
#. I would advise against it.)
#: ../src/commands.c:1502
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "Survex Version %s oder neuer ist zum Verarbeiten dieser Daten erforderlich."

#. TRANSLATORS: Used with message 5 like so:
#. In file included from area.svx:12,
#. from cave.svx:3:
#. passage.svx:17: <some error or warning>
#: ../src/datain.c:107
msgid "from"
msgstr "von"

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#: ../src/aven.cc:351
#: ../src/message.c:1181
msgid "warning"
msgstr "Warnung"

#. TRANSLATORS: de: we really want the filename/line number at the end (so error parsing
#. editors can follow), so the natural translation:
#. "In von %s:%d: aus eingelesener Datei"
#. isn't ideal.  This is "clumsy but workable":
#: ../src/datain.c:103
msgid "In file included from"
msgstr "In eingelesener Datei ausgehend von"

#: ../src/commands.c:507
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix ist veraltet - stattdessen *begin und *end verwenden"

#. TRANSLATORS: de: shorter, but not as good:
#. Unerlaubtes Zeichen `%c' in Meßpunktname (erlaubte Zeichen mit *SET NAMES definieren)
#: ../src/readval.c:121
#, c-format
msgid "Character `%c' not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "Unerlaubtes Zeichen `%c' in Messpunktname (erlaubte Zeichen können mit *SET NAMES definiert werden)"

#: ../src/readval.c:319
msgid "Field may not be omitted"
msgstr "Eintragung fehlt"

#: ../src/datain.c:1436
#: ../src/datain.c:1447
#: ../src/datain.c:1708
#: ../src/readval.c:321
#: ../src/readval.c:362
#: ../src/readval.c:392
#, c-format
msgid "Expecting numeric field, found `%s'"
msgstr "Zahl erwartet, `%s' gelesen"

#. TRANSLATORS: de: Gerhard: "`%s' gelesen" means "have read `%s'" - "gefunden", the literal
#. equivalent, doesn't sound quite right here
#. NB there is no comma before "oder"
#: ../src/commands.c:1410
#, c-format
msgid "Found `%s', expecting `PRESERVE', `TOUPPER', or `TOLOWER'"
msgstr "`%s' gelesen, `PRESERVE', `TOUPPER' oder `TOLOWER' erwartet"

#: ../src/matrix.c:359
#: ../src/message.c:233
#: ../src/debug.h:45
#: ../src/debug.h:47
msgid "Bug in program detected! Please report this to the authors"
msgstr "Fehler im Programm, bitte informieren Sie die Programmierer darüber"

#. TRANSLATORS: de: Gerhard says "Kommando" and "Befehl" are equally valid translations - use
#. Befehl to be consistency.
#: ../src/commands.c:1614
#: ../src/extend.c:420
#, c-format
msgid "Unknown command `%s'"
msgstr "Unbekanntes Befehl `%s'"

#: ../src/netbits.c:407
#, c-format
msgid "Station `%s' equated to itself"
msgstr "Messpunkt `%s' mit sich selbst gleichgesetzt"

#: ../src/datain.c:970
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "Kompassablesung darf nur bei Lotstrecken weggelassen werden"

#: ../src/datain.c:236
#: ../src/extend.c:425
msgid "End of line not blank"
msgstr "Ende der Zeile ist nicht leer"

#. TRANSLATORS: de: Es wurden %d Warnungen registriert.
#: ../src/cavern.c:374
#, c-format
msgid "There were %d warning(s)."
msgstr "Es gab %d Warnungen."

#. TRANSLATORS: pipe here means a Unix pipe, which transfers data between two programs
#. -- probably best not to translate it
#: ../src/cavernlog.cc:210
#, c-format
msgid "Couldn't open pipe: `%s'"
msgstr "Konnte `Pipe' nicht öffnen: `%s'"

#: ../src/datain.c:80
#: ../src/datain.c:88
#: ../src/datain.c:95
#: ../src/datain.c:723
#: ../src/extend.c:544
#: ../src/sorterr.c:75
#: ../src/sorterr.c:92
#: ../src/sorterr.c:234
msgid "Error reading file"
msgstr "Fehler beim Einlesen der Datei"

#. TRANSLATORS: anthropomorphising version: de: 19 Zu viele Fehler - ich gebe auf
#: ../src/message.c:1196
msgid "Too many errors - giving up"
msgstr "Abbruch wegen zu vieler Fehler"

#: ../src/commands.c:1291
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "*DEFAULT ist veraltet - stattdessen *CALIBRATE/DATA/SD/UNITS mit DEFAULT-Argument verwenden"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
#. So the problem here is that the leg is vertical, so a compass reading has
#. no meaning!
#: ../src/datain.c:943
msgid "Compass reading given on plumbed leg"
msgstr "Kompassablesung für geloteten Schacht angegeben"

#: ../src/commands.c:569
msgid "END with no matching BEGIN in this file"
msgstr "END ohne entsprechendes BEGIN in dieser Datei"

#: ../src/datain.c:710
msgid "BEGIN with no matching END in this file"
msgstr "BEGIN ohne entsprechendes END in dieser Datei"

#: ../src/printwx.cc:1166
#: ../src/datain.c:352
#: ../src/img.c:176
#, c-format
msgid "Couldn't open data file `%s'"
msgstr "Konnte Datendatei nicht öffnen oder finden `%s'"

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is deprecated, so this error
#. would be generated by:
#. *equate \foo.7 1
#: ../src/commands.c:416
#: ../src/readval.c:62
#: ../src/readval.c:66
msgid "ROOT is deprecated"
msgstr "ROOT ist veraltet"

#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
#. "Station `\outer.inner.1' not exported from survey `\outer')":
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#: ../src/commands.c:813
#: ../src/listpos.c:130
#: ../src/readval.c:240
#, c-format
msgid "Station `%s' not exported from survey `%s'"
msgstr "Messpunkt `%s' nicht aus Vermessung `%s' exportiert"

#: ../src/readval.c:212
#, c-format
msgid "`%s' can't be both a station and a survey"
msgstr "`%s' kann nicht ein Messpunkt und eine Vermessung sein"

#: ../src/extend.c:247
#: ../src/extend.c:262
#: ../src/extend.c:302
#: ../src/extend.c:342
#: ../src/extend.c:382
#: ../src/readval.c:118
msgid "Expecting station name"
msgstr "Messpunktname erwartet"

#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
#. de: deprecated is a wonderful English word lacking a wonderful German
#. equivalent....  errm and do we have a translation for "prefix level"
#. yet?  (rummaging in old mail folders)  apparently not.  Ok.  Would
#. "to introduce a prefix" be a rough equivalent for "to enter a prefix
#. level"?
#: ../src/commands.c:479
msgid "Reentering an existing prefix level is deprecated"
msgstr "Erneutes Einführen eines Präfix ist veraltet"

#: ../src/commands.c:486
msgid "Originally entered here"
msgstr "Bereits hier verwendet"

#: ../src/commands.c:1439
#, c-format
msgid "Found `%s', expecting `EQUATES', `EXPORTS', or `PLUMBS'"
msgstr "`%s' gelesen, `EQUATES', `EXPORTS' oder `PLUMBS' erwartet"

#: ../src/commands.c:1445
#, c-format
msgid "Found `%s', expecting `ON' or `OFF'"
msgstr "`%s' gelesen, `ON' oder `OFF' erwartet"

#. TRANSLATORS: EQUATE is a command name, so shouldn't be translated.  I've attempted to
#. update de, but my language skills aren't great...
#: ../src/commands.c:786
msgid "Only one station in EQUATE command"
msgstr "Nur ein Messpunkt im EQUATE-Befehl angegeben"

#: ../src/commands.c:372
#, c-format
msgid "Unknown quantity `%s'"
msgstr "Unbekannte Größe `%s'"

#: ../src/commands.c:298
#, c-format
msgid "Unknown units `%s'"
msgstr "Unbekannte Einheit(en) `%s'"

#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:586
msgid "Matching BEGIN tag has no prefix"
msgstr "Zugehöriges BEGIN hatte keine Präfix"

#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
#. the correct term in other languages may be singular.
#. de: This is assuming there is _no_ subsequent message naming the culprit
#. quantity.  If there is, make it `die Größe', and append its
#. name immediately.
#: ../src/commands.c:307
#, c-format
msgid "Invalid units `%s' for quantity"
msgstr "Unpassende Einheit `%s' für diese Größe"

#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
#. a filename parameter - we don't really want it here, so lose it with "%.0s"
#. (which should display 0 characters from the filename) FIXME: sort out this
#: ../src/img.c:177
msgid "Out of memory %.0s"
msgstr "Nicht genug Speicher vorhanden %.0s"

#: ../src/commands.c:366
#, c-format
msgid "Unknown instrument `%s'"
msgstr "Unbekanntes Instrument `%s'"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
#: ../src/commands.c:1267
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "Skalenfaktor für die DECLINATION muss 1.0 sein"

#: ../src/commands.c:1309
#, c-format
msgid "Unknown setting `%s'"
msgstr "Unbekannte (ungültige) Einstellung `%s'"

#: ../src/commands.c:409
#, c-format
msgid "Unknown character class `%s'"
msgstr "Unbekannte Zeichenklasse `%s'"

#: ../src/extend.c:590
#: ../src/netskel.c:89
msgid "No survey data"
msgstr "Keine Vermessungsdaten vorhanden"

#. TRANSLATORS: de: sounds ugly, but is correct, and I can't think of a replacement
#: ../src/filename.c:52
#: ../src/img.c:178
#, c-format
msgid "Filename `%s' refers to directory"
msgstr "Dateiname `%s' bezeichnet ein Verzeichnis"

#: ../src/netartic.c:374
msgid "Survey not all connected to fixed stations"
msgstr "Teile der Vermessung sind nicht an feste Punkte angeschlossen"

#: ../src/commands.c:725
#: ../src/datain.c:633
msgid "Station already fixed or equated to a fixed point"
msgstr "Messpunkt ist schon fest oder gleich einem festen Punkt"

#: ../src/cavern.c:277
#: ../src/filename.c:55
#: ../src/img.c:179
#, c-format
msgid "Failed to open output file `%s'"
msgstr "Konnte Ausgabedatei nicht öffnen `%s'"

#: ../src/commands.c:1364
msgid "Standard deviation must be positive"
msgstr "Standardabweichung muss positiv sein"

#. TRANSLATORS: as in: Usage: cavern ...
#: ../src/cmdline.c:147
msgid "Usage"
msgstr "Aufruf"

#. TRANSLATORS: %s is a placeholder for the name of the station
#: ../src/netbits.c:335
#, c-format
msgid "Survey leg with same station (`%s') at both ends - typing error?"
msgstr "Messstrecke von einem Punkt (`%s') zu sich selbst - Tippfehler?"

#. TRANSLATORS: de: `Grad' *is* `degree'.  The decimal grades are called `Neugrad'
#. when necessary to avoid confusion.  While surface surveyors here use
#. these per default, cavers rarely do.
#: ../src/datain.c:901
#: ../src/datain.c:916
msgid "Clino reading over 90 degrees (absolute value)"
msgstr "Neigungseintrag übertrifft 90 Grad (Absolutwert)"

#: ../src/netbits.c:422
#, c-format
msgid "Tried to equate two non-equal fixed stations: `%s' and `%s'"
msgstr "Versuch, zwei verschiedene feste Punkte gleichzusetzen: `%s' und `%s'"

#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
#: ../src/netbits.c:428
#, c-format
msgid "Equating two equal fixed points: `%s' and `%s'"
msgstr "Zwei identische Punkte miteinander gleichgesetzt: `%s' und `%s'"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:643
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "FIX-Befehl ohne Koordinatenwerte, wurde auf (0,0,0) gesetzt"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:728
#: ../src/datain.c:635
msgid "Station already fixed at the same coordinates"
msgstr "Messpunkt schon auf die gleichen Koordinaten festgelegt"

#: ../src/commands.c:636
msgid "More than one FIX command with no coordinates"
msgstr "Mehr als ein FIX-Befehl ohne Koordinaten"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
#. would generate error 57:
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:1621
msgid "*EXPORT must immediately follow `*BEGIN <SURVEY>'"
msgstr "*EXPORT muss unmittelbar auf `*BEGIN <VERMESSUNG>' folgen"

#: ../src/readval.c:448
msgid "Invalid year (< 1900 or > 2078)"
msgstr "Ungültiges Jahr (< 1900 oder > 2078)"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
#: ../src/datain.c:818
#: ../src/datain.c:827
msgid "Suspicious compass reading"
msgstr "Seltsamer Kompasswert"

#: ../src/datain.c:1414
msgid "Negative tape reading"
msgstr "Negativer Längeneintrag"

#: ../src/commands.c:638
msgid "Same station fixed twice with no coordinates"
msgstr "Gleicher Punkt zweimal ohne Koordinaten angegeben"

#. TRANSLATORS: This means that the data fed in said this.
#. It could be a gross error (e.g. the decimal point is missing from
#. the depth gauge reading) or it could just be due to random error on
#. a near vertical leg
#. de: Note that a change in depth becomes a `change in height' in German
#: ../src/datain.c:1117
msgid "Tape reading is less than change in depth"
msgstr "Längeneintrag ist kleiner als Höhenunterschied"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. neither style nor reading is a keyword in the program
#. This error complains about a depth gauge reading in normal style, for example
#: ../src/commands.c:1018
#, c-format
msgid "Reading `%s' not allowed in data style `%s'"
msgstr "Messgröße `%s' ist bei Datenformat `%s' nicht erlaubt"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1181
#, c-format
msgid "Too few readings for data style `%s'"
msgstr "Zu wenige Messwerte für Datenformat `%s'"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#: ../src/commands.c:985
#, c-format
msgid "Data style `%s' unknown"
msgstr "Datenformat `%s' unbekannt"

#. TRANSLATORS: Exporting a station twice give error 66:
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:857
#, c-format
msgid "Station `%s' already exported"
msgstr "Messpunkt `%s' bereits exportiert"

#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
#. de: The reservations with respect to "quantity"  (a close equivalent
#. to "Meßgröße")  apply to the German term as well --
#. a from station of a leg isn't a "Meßgröße" either
#. by any stretch of the imagination.
#: ../src/commands.c:1036
#, c-format
msgid "Duplicate reading `%s'"
msgstr "Messgröße `%s' mehrfach angegeben"

#: ../src/commands.c:754
#, c-format
msgid "FLAG `%s' unknown"
msgstr "FLAG `%s' unbekannt"

#: ../src/readval.c:406
msgid "Missing \""
msgstr "\" fehlt"

#: ../src/listpos.c:105
#, c-format
msgid "Station `%s' referred to just once, with an explicit prefix - typo?"
msgstr "Messpunkt `%s' nur einmal erwähnt, mit explizitem Präfix - Tippfehler?"

#: ../src/netartic.c:379
msgid "The following survey stations are not attached to a fixed point:"
msgstr "Die folgenden Vermessungspunkte haben keine festen Koordinaten:"

#: ../src/netskel.c:128
#, c-format
msgid "Survey has no fixed points. Therefore I've fixed %s at (0,0,0)"
msgstr "Vermessung hat keine Festpunkte. %s wurde als Nullpunkt (0,0,0) gewählt"

#. TRANSLATORS: fixed station that is not part of any survey
#: ../src/netskel.c:896
#, c-format
msgid "Unused fixed point `%s'"
msgstr "Festpunkt nicht verwendet `%s'"

#: ../src/matrix.c:123
msgid "Network solved by reduction - no simultaneous equations to solve."
msgstr "Netzausgleichung gelöst durch Reduktion - kein Gleichungssystem erforderlich."

#: ../src/matrix.c:135
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "Löse System mit %d Gleichungen und Unbekannten"

#. TRANSLATORS: %c is 'x', 'y' or 'z'
#: ../src/matrix.c:150
#, c-format
msgid "Solving to find %c coordinates"
msgstr "Auflösen nach den %c-Koordinaten"

#. TRANSLATORS: de has the reverse singular/plural arrangement :)
#. (i.e., singular has the final -n, plural doesn't)
#: ../src/commands.c:1090
#, c-format
msgid "Reading `%s' duplicates previous reading(s)"
msgstr "Eintrag `%s' wiederholt frühere(n)"

#: ../src/matrix.c:133
msgid "Solving one equation"
msgstr "Eine Gleichung wird gelöst"

#: ../src/datain.c:889
#: ../src/datain.c:1111
#: ../src/datain.c:1300
msgid "Negative adjusted tape reading"
msgstr "Negative korrigierte Streckenlänge"

#: ../src/commands.c:1539
#: ../src/commands.c:1559
msgid "Date is in the future!"
msgstr "Datum liegt in der Zukunft!"

#: ../src/commands.c:1563
msgid "End of date range is before the start"
msgstr "Das Enddatum ist früher als das Anfangsdatum"

#: ../src/avenprcore.cc:118
#, c-format
msgid "Parameter `%s' has invalid value `%s' in printer configuration file"
msgstr "Parameter `%s' hat ungültigen Wert `%s' in der Druckerkonfigurationsdatei"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
#. there is no station "entrance.27" in the centre-line.
#: ../src/netskel.c:980
#, c-format
msgid "Cross section specified at non-existent station `%s'"
msgstr ""

#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
#. foresight and a clino reading for the backsight, or something similar.
#: ../src/datain.c:930
#: ../src/datain.c:951
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "CLINO- und BACKCLINO-Eintrag müssen den gleichen Typ haben"

#: ../src/avenprcore.cc:113
#, c-format
msgid "Parameter `%s' missing in printer configuration file"
msgstr "Parameter `%s' fehlt in der Druckerkonfigurationsdatei"

#: ../src/readval.c:456
msgid "Invalid month"
msgstr "Ungültiger Monat"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/readval.c:464
msgid "Invalid day of the month"
msgstr "Ungültiger Monatstag"

#, c-format
msgid "Error in format of font file `%s'"
msgstr "Formatfehler in der Zeichensatzdatei `%s'"

#: ../src/readval.c:116
msgid "Expecting survey name"
msgstr "Name einer Vermessung erwartet"

#. TRANSLATORS: Program will exit shortly after printing this
#: ../src/message.c:224
msgid "Abnormal termination"
msgstr "Programmabbruch"

#: ../src/message.c:225
msgid "Arithmetic error"
msgstr "Arithmetik-Fehler"

#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
#: ../src/message.c:226
msgid "Illegal instruction"
msgstr "Illegaler CPU-Befehlscode"

#: ../src/mainfrm.cc:364
#: ../src/extend.c:539
#: ../src/sorterr.c:140
#, c-format
msgid "Couldn't open file `%s'"
msgstr "Konnte Datei `%s' nicht öffnen"

#: ../src/message.c:227
msgid "Bad memory access"
msgstr "Fehler beim Speicherzugriff"

#: ../src/commands.c:418
#: ../src/commands.c:481
#: ../src/commands.c:509
#: ../src/commands.c:999
#: ../src/commands.c:1293
#: ../src/readval.c:68
msgid "Further uses of this deprecated feature will not be reported"
msgstr "Weitere Vorkommen dieser veralteten Funktionalität werden nicht gemeldet werden"

#: ../src/message.c:228
msgid "Unknown signal received"
msgstr "Unbekanntes Signal erhalten"

#: ../src/datain.c:855
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
msgstr "COMPASS- und BACKCOMPASS-Eintrag differieren um %s Grad"

#: ../src/datain.c:999
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
msgstr "CLINO- und BACKCLINO-Eintrag differieren um %s Grad"

#. TRANSLATORS: A computer mouse, not the rodent sort ;)
#. Actually, mouse is somewhat imprecise as it could refer to a trackerball
#. or joystick, but mouse is more compact than "pointing device" and usually
#. correct.
msgid "No mouse detected"
msgstr "Keine Maus angeschlossen"

#. TRANSLATORS: %05.1f will be replaced by something like "123.4"
msgid "Plan, %05.1f up screen"
msgstr "Grundriß, oben auf dem Bildschirm = Richtung %05.1f"

msgid "View towards %05.1f"
msgstr "Aufriß, Blick in Richtung %05.1f"

#. TRANSLATORS: de: Or shorter, just have - `siehe Handbuch' for the second half.
msgid "You need to calibrate your printer - see the manual for details."
msgstr "Drucker muss kalibriert werden - näher beschrieben im Handbuch."

#: ../src/commands.c:996
#, c-format
msgid "`*data %s %c …' is deprecated - use `*data %s …' instead"
msgstr "`*data %s %c …' ist veraltet - stattdessen `*data %s …' verwenden"

#: ../src/extend.c:491
msgid "Reading in data - please wait…"
msgstr "Daten werden eingelesen - bitte warten…"

#. TRANSLATORS: Probably not a .3D file.  caverot autoexec.bat would give this
#: ../src/3dtopos.c:154
#: ../src/3dtopos.c:160
#: ../src/cad3d.c:865
#: ../src/cad3d.c:876
#: ../src/img.c:180
#, c-format
msgid "Bad 3d image file `%s'"
msgstr "3D-Bilddatei `%s' ist fehlerhaft"

#. TRANSLATORS: This is the date format string used to timestamp .3d files internally
#. Probably best to keep it the same for all translations
#: ../src/img.c:48
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: put in .3d file if we can't read the date/time
#: ../src/img.c:47
msgid "Date and time not available."
msgstr "Datum und Uhrzeit nicht feststellbar."

#: ../src/img.c:181
#, c-format
msgid "Error reading from file `%s'"
msgstr "Fehler beim Lesen der Datei `%s'"

#: ../src/gfxcore.cc:2886
#: ../src/mainfrm.cc:322
#: ../src/mainfrm.cc:1728
#: ../src/mainfrm.cc:2179
#: ../src/filename.c:79
#: ../src/img.c:182
#, c-format
msgid "Error writing to file `%s'"
msgstr "Fehler beim Schreiben in die Datei `%s'"

#: ../src/filename.c:82
msgid "Error writing to file"
msgstr "Fehler beim Schreiben in eine Datei"

#: ../src/sorterr.c:76
#: ../src/sorterr.c:93
#: ../src/sorterr.c:164
msgid "Couldn't parse .err file"
msgstr ".err-Datei konnte nicht interpretiert werden"

#. TRANSLATORS: de: Es wurden %d Warnungen und %d Fehler registriert.
#: ../src/cavern.c:369
#, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "Es gab %d Warnungen und %d Fehler - keine Ausgabedatei erstellt."

#: ../src/img.c:183
#, c-format
msgid "File `%s' has a newer format than this program can understand"
msgstr "Datei `%s' ist in einem neueren Format, als dieses Programm verstehen kann"

#: ../src/printwx.cc:634
msgid "North"
msgstr "Norden"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printwx.cc:651
msgid "Elevation on"
msgstr "Aufriß auf die Ebene"

#: ../src/printwx.cc:255
#: ../src/printwx.cc:637
msgid "Plan view"
msgstr "Grundriß"

#: ../src/gfxcore.cc:713
#: ../src/printwx.cc:257
#: ../src/printwx.cc:660
msgid "Elevation"
msgstr "Aufriß"

msgid "3d file"
msgstr "3D-Bilddatei"

#: ../src/cavern.c:331
msgid "Calculating statistics"
msgstr "Statistik wird berechnet"

#: ../src/readval.c:420
msgid "Expecting string field"
msgstr "Textfeld erwartet"

#: ../src/cmdline.c:190
msgid "too few arguments"
msgstr "zu wenige Argumente"

#: ../src/cmdline.c:197
msgid "too many arguments"
msgstr "zu viele Argumente"

#: ../src/cmdline.c:156
#: ../src/cmdline.c:159
#: ../src/cmdline.c:163
msgid "FILE"
msgstr "DATEI"

#. TRANSLATORS: a trailing traverse is a dead end back to a junction
#: ../src/netskel.c:162
msgid "Removing trailing traverses"
msgstr "Einseitig angeschlossene Messzüge werden entfernt"

#: ../src/netskel.c:216
msgid "Concatenating traverses between nodes"
msgstr "Messzüge zwischen Abzweigungen werden verbunden"

#: ../src/netskel.c:409
msgid "Calculating traverses between nodes"
msgstr "Messzüge zwischen Abzweigungen werden berechnet"

#: ../src/netskel.c:739
msgid "Calculating trailing traverses"
msgstr "Einseitig angeschlossene Messzüge werden berechnet"

#: ../src/network.c:82
msgid "Simplifying network"
msgstr "Netzwerk wird vereinfacht"

#: ../src/network.c:540
msgid "Calculating network"
msgstr "Netzwerk wird ausgeglichen"

#: ../src/datain.c:1404
#, c-format
msgid "Found `%s', expecting `F' or `B'"
msgstr "`%s' gelesen, `F' oder `B' erwartet"

#: ../src/cavern.c:425
msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
msgstr "Gesamtlänge der Messstrecken = %7.2fm (%7.2fm ausgeglichen)"

#: ../src/cavern.c:428
msgid "Total plan length of survey legs = %7.2fm"
msgstr "Gesamte Horizontallänge der Messstrecken = %7.2fm"

#: ../src/cavern.c:431
msgid "Total vertical length of survey legs = %7.2fm"
msgstr "Gesamte Vertikallänge der Messstrecken = %7.2fm"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:457
msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Vertikale Erstreckung = %4.2fm (von %s auf %4.2fm bis %s auf %4.2fm)"

#. TRANSLATORS: c.f. previous message
#: ../src/cavern.c:458
msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Nord-Süd-Erstreckung = %4.2fm (von %s bei %4.2fm bis %s bei %4.2fm)"

#. TRANSLATORS: c.f. previous two messages
#: ../src/cavern.c:459
msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Ost-West-Erstreckung = %4.2fm (von %s bei %4.2fm bis %s bei %4.2fm)"

#. TRANSLATORS: de: There _is_ a technical term for this which I fail to remember at the moment.
#: ../src/cavern.c:413
msgid "There is 1 loop."
msgstr "Es gibt eine Ringverbindung."

#. TRANSLATORS: de: There _is_ a technical term for this which I fail to remember at the moment.
#: ../src/cavern.c:415
#, c-format
msgid "There are %ld loops."
msgstr "Es gibt %ld Ringverbindungen."

#. TRANSLATORS: CPU isn't CPU in French
#: ../src/cavern.c:353
msgid "CPU time used %5.2fs"
msgstr "Benötigte Rechenzeit (CPU) %5.2fs"

#: ../src/cavern.c:356
msgid "Time used %5.2fs"
msgstr "Benötigte Zeit %5.2fs"

#: ../src/cavern.c:358
msgid "Time used unavailable"
msgstr "Benötigte Zeit nicht feststellbar"

#: ../src/cavern.c:361
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "Benötigte Zeit %5.2fs (%5.2fs CPU-Zeit)"

#: ../src/cavern.c:365
msgid "Done."
msgstr "Fertig."

#: ../src/netskel.c:717
msgid "Original length%7.2fm (%3d legs), moved%7.2fm (%5.2fm/leg). "
msgstr "Ursprüngliche Länge%7.2fm (%3d Strecken), verändert um%7.2fm (%5.2fm/Messstrecke). "

#: ../src/netskel.c:720
msgid "Error%7.2f%%"
msgstr "Fehler%7.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
#. error per metre is meaningless
#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
#. the numbers in the message above.
#: ../src/netskel.c:722
msgid "Error    N/A"
msgstr "Fehler   belanglos"

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:127
msgid "display this help and exit"
msgstr "Diese Hilfemeldung anzeigen und Beenden"

#. TRANSLATORS: description of --verbose option
#: ../src/cmdline.c:128
msgid "output version information and exit"
msgstr "Versionsinformation ausgeben und beenden"

#. TRANSLATORS: As in "printer driver"
msgid "Driver"
msgstr "Treiber"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]...
#: ../src/cmdline.c:148
msgid "OPTION"
msgstr "OPTION"

#: ../src/printwx.cc:220
#: ../src/printwx.cc:672
#: ../src/printwx.cc:733
msgid "Scale"
msgstr "Maßstab"

msgid "Continue"
msgstr "Weiter"

msgid "Exiting."
msgstr "Ende."

#: ../src/cmdline.c:172
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Versuchen Sie `%s --help' für weitere Hinweise.\n"

msgid "Plan or Elevation"
msgstr "Grundriß oder Aufriß"

msgid "Bearing up page (degrees): "
msgstr "Richtung nach oben auf der Seite (Grad): "

msgid "View towards: "
msgstr "Blick in Richtung: "

#. TRANSLATORS: de: I would have written "Blickneigung" or something like that, but this
#. would have made the sign convention even more counterintuitive.
msgid "Tilt (degrees): "
msgstr "Neigung (Grad): "

#, c-format
msgid "Please enter Map Scale = X:Y (default 1:%d)\n: "
msgstr "Bitte den Maßstab = X:Y eingeben (Default 1:%d)\n: "

msgid "Using scale %.0f:%.0f"
msgstr "Verwendeter Maßstab %.0f:%.0f"

msgid "Print which pages?\n(RETURN for all; 'n' for one page, 'm-n', 'm-', '-n' for a range)\n: "
msgstr "Welche Seite(n) drucken?\n(RETURN für alle; 'n' für eine Seite, 'm-n', 'm-', '-n' für entsprechende Abschnitte)\n: "

#. TRANSLATORS: e.g. "Printing to `somefile.ps'..." / "Printing to `Laserjet4 on amachine...'
#, c-format
msgid "Printing to `%s'…"
msgstr "Drucken nach `%s'…"

#: ../src/avenprcore.cc:262
#, c-format
msgid "Page %d of %d"
msgstr "Seite %d von %d"

#: ../src/avenprcore.cc:266
#: ../src/printwx.cc:1172
#, c-format
msgid "Survey `%s'   Page %d (of %d)   Processed on %s"
msgstr "Vermessung `%s'   Seite %d (von %d)   Berechnung von Seite %s"

#. TRANSLATORS: This is used on printouts of plan views, and gives the bearing up the page
#. (so if North is across the page to the right, 270 is "Up page"
#: ../src/printwx.cc:677
msgid "Up page"
msgstr "Oben"

#. TRANSLATORS: This is used on printouts of elevations
#. It gives the bearing we're looking in the direction of
#: ../src/printwx.cc:677
msgid "View"
msgstr "Ansicht"

#, c-format
msgid "This will need %d pages (%dx%d)."
msgstr "Dies benötigt %d Seiten (%dx%d)."

msgid "This will need 1 page."
msgstr "Dies benötigt eine Seite."

#: ../src/cavern.c:399
msgid "Survey contains 1 survey station,"
msgstr "Vermessung enthält 1 Verzweigungspunkt,"

#: ../src/cavern.c:401
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "Vermessung enthält %ld Verzweigungspunkte,"

#: ../src/cavern.c:405
msgid " joined by 1 leg."
msgstr " verbunden durch eine Meßstrecke."

#: ../src/cavern.c:407
#, c-format
msgid " joined by %ld legs."
msgstr " verbunden durch %ld Strecken."

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:159
msgid "node"
msgstr "Verzweigungspunkt"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:159
msgid "nodes"
msgstr "Verzweigungspunkte"

#. TRANSLATORS: connected component in the graph theory sense
#. It means there are %ld bits of survey with no connections between them
#. This message is only used if there are more than 1
#: ../src/cavern.c:421
#, c-format
msgid "Survey has %ld connected components."
msgstr "Netzwerk hat %ld zusammenhängende Teile."

#, c-format
msgid "Bad list of pages to print `%s'"
msgstr "Liste zu druckender Seiten `%s' ist fehlerhaft"

#. TRANSLATORS: menu commands for (ynq) style choices (may become menu entries later)
msgid "yes"
msgstr "ja"

msgid "no"
msgstr "nein"

#. TRANSLATORS: de: or `aufhören'.  These are parts of menus, right?  as in `yes,no,abort'?
#. In fact, `verlassen' is only appropriate when you want to quit the whole
#. program.  If you just want to abort an action, it ought to be `Abbruch'.
#. Yes this is a noun not a verb, but that's what's commonly used.
#. If this one is part of a (yes,no,quit) selection based on the first letter, it
#. is better to use this message (even if it isn't usual):
msgid "quit"
msgstr "verlassen"

msgid "plan"
msgstr "Grundriß"

msgid "elevation"
msgstr "Aufriß"

#: ../src/cmdline.c:219
#: ../src/cmdline.c:238
#, c-format
msgid "numeric argument `%s' out of range"
msgstr "numerisches Argument `%s' nicht im erlaubten Bereich"

#: ../src/cmdline.c:221
#, c-format
msgid "argument `%s' not an integer"
msgstr "Argument `%s' ist nicht ganzzahlig"

#: ../src/cmdline.c:240
#, c-format
msgid "argument `%s' not a number"
msgstr "Argument `%s' ist keine Zahl"

#. TRANSLATORS: de: NB there is no comma before "oder"
#: ../src/commands.c:768
msgid "Expecting `DUPLICATE', `SPLAY', or `SURFACE'"
msgstr "`DUPLICATE', `SPLAY' oder `SURFACE' erwartet"

#. TRANSLATORS: de: NB there is no comma before "oder"
#: ../src/commands.c:770
msgid "Expecting `NOT', `DUPLICATE', `SPLAY', or `SURFACE'"
msgstr "`NOT', `DUPLICATE', `SPLAY' oder `SURFACE' erwartet"

#: ../src/listpos.c:86
#, c-format
msgid "Station `%s' referred to by *entrance or *export but never used"
msgstr "Messpunkt `%s' in *entrance oder *export erwähnt, aber nie verwendet"

#: ../src/printwx.cc:665
msgid "Extended elevation"
msgstr "Abwicklung"

#: ../src/commands.c:567
msgid "No matching BEGIN"
msgstr "Kein entsprechendes BEGIN"

#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it's
#. given at all
#: ../src/commands.c:589
msgid "Prefix tag doesn't match BEGIN"
msgstr "Präfix passt nicht zu BEGIN"

#: ../src/commands.c:593
msgid "Closing prefix omitted from END"
msgstr "Präfix vor END fehlt"

#. TRANSLATORS: heading line for .pos file
#. please try to ensure the ','s (or at least the columns) are in the same place
#: ../src/3dtopos.c:109
msgid "( Easting, Northing, Altitude )"
msgstr "( Rechtsw.,Hochwert, Höhe     )"

#: ../src/readval.c:444
#: ../src/readval.c:454
#: ../src/readval.c:462
#, c-format
msgid "Expecting date, found `%s'"
msgstr "Datum erwartet, `%s' gelesen"

#. TRANSLATORS: --help output for --survey option
#. "this" has been added to English translation
#, fuzzy
msgid "only load the sub-survey with this prefix"
msgstr "nur Teilvermessung mit Präfix laden"

#. TRANSLATORS: error message given by "*units tape 0 feet" - it's meaningless to say
#. your tape is marked in "0 feet" (but you might measure distance by counting
#. knots on a diving line, and tie them every "2 feet").
#: ../src/commands.c:1223
msgid "*UNITS factor must be non-zero"
msgstr "Faktor nach *UNITS muss von Null verschieden sein"

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:720
msgid "&Screenshot…"
msgstr "Bildschirm&abzug…"

#: ../src/mainfrm.cc:1254
#, c-format
msgid "No survey data in 3d file `%s'"
msgstr "Keine Vermessungsdaten in 3D-Datei `%s'"

#: ../src/gfxcore.cc:671
msgid "Facing"
msgstr "Blickrichtung"

msgid "Close"
msgstr "Schließen"

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:69
#, c-format
msgid "About %s"
msgstr "Über %s"

#. TRANSLATORS: Aven menu items.  An '&' goes before the letter of any accelerator key.
#. The string "\t" separates the menu text and any accelerator key.
#. File->Open dialog:
#: ../src/mainfrm.cc:1701
msgid "Select a 3d file to view"
msgstr "3D-Datei zur Ansicht wählen"

#: ../src/mainfrm.cc:1692
msgid "Survex 3d files"
msgstr "Survex 3D-Dateien"

#: ../src/mainfrm.cc:1697
#: ../src/mainfrm.cc:2096
msgid "All files"
msgstr "Alle Dateien"

#. TRANSLATORS: in the about box (summarising the purpose of aven)
#: ../src/aboutdlg.cc:87
msgid "Survey visualisation tool"
msgstr "Visualisierungsprogramm für Vermessungsdaten"

#. TRANSLATORS: Aven menu titles.  An '&' goes before the letter of any accelerator key.
#. The accelerators must be different within this group
#: ../src/mainfrm.cc:832
msgid "&File"
msgstr "&Datei"

#: ../src/mainfrm.cc:833
msgid "&Rotation"
msgstr "&Rotieren"

#: ../src/mainfrm.cc:834
msgid "&Orientation"
msgstr "&Orientierung"

#: ../src/mainfrm.cc:835
msgid "&View"
msgstr "&Ansehen"

#: ../src/mainfrm.cc:837
msgid "&Controls"
msgstr "&Steuerung"

#: ../src/mainfrm.cc:843
msgid "&Help"
msgstr "&Hilfe"

#: ../src/mainfrm.cc:839
msgid "&Presentation"
msgstr "&Präsentation"

#: ../src/aboutdlg.cc:98
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "Dieses Programm ist freie Software. Sie können es unter den Bedingungen der GNU General Public License, wie von der Free Software Foundation herausgegeben, weitergeben und/oder modifizieren, entweder unter Version 2 der Lizenz oder (wenn Sie es wünschen) jeder späteren Version."

#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:715
msgid "&Open…\tCtrl+O"
msgstr "Ö&ffnen…\tCtrl+O"

#: ../src/mainfrm.cc:727
msgid "&Quit\tCtrl+Q"
msgstr "&Beenden\tCtrl+Q"

#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
#: ../src/commands.c:1079
msgid "NEWLINE can't be the first reading"
msgstr "NEWLINE kann nicht der erste Eintrag sein"

#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
#: ../src/commands.c:1112
msgid "NEWLINE can't be the last reading"
msgstr "NEWLINE kann nicht der letzte Eintrag sein"

#. TRANSLATORS: error from "*data normal station tape compass clino"
#: ../src/commands.c:1134
msgid "Interleaved readings, but no NEWLINE"
msgstr "Abwechselnde Einträge, aber kein NEWLINE"

#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
#: ../src/commands.c:1026
#, c-format
msgid "Reading `%s' must occur before NEWLINE"
msgstr "Eintrag `%s' muss vor NEWLINE kommen"

#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
#: ../src/commands.c:1073
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "Vor NEWLINE kann nur STATION, DEPTH oder COUNT stehen"

#: ../src/commands.c:1257
msgid "Can't calibrate angular and length quantities together"
msgstr "Winkel und Längen können nicht gleichzeitig kalibriert werden"

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
#. height values).
msgid "Select a terrain file to view"
msgstr "Geländedatei zur Ansicht wählen"

msgid "Terrain files"
msgstr "Geländedateien"

#. TRANSLATORS: Used in the "Export" settings dialog
#: ../src/printwx.cc:298
msgid "&Export…"
msgstr "&Exportieren…"

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
#. Tickable menu item which toggles auto rotation
#: ../src/mainfrm.cc:733
msgid "Au&to-Rotate\tSpace"
msgstr "Auto&matisch rotieren\tSpace"

#: ../src/mainfrm.cc:735
msgid "Speed &Up"
msgstr "&Schneller"

#: ../src/mainfrm.cc:736
msgid "Slow &Down"
msgstr "&Langsamer"

#: ../src/mainfrm.cc:738
msgid "&Reverse Direction"
msgstr "&Andere Richtung"

#: ../src/mainfrm.cc:740
msgid "Step Once &Anticlockwise"
msgstr "Schritt im &Gegenuhrzeigersinn"

#: ../src/mainfrm.cc:741
msgid "Step Once &Clockwise"
msgstr "Schritt im &Uhrzeigersinn"

#: ../src/mainfrm.cc:798
msgid "&Perspective"
msgstr "&Perspektive"

#: ../src/mainfrm.cc:800
msgid "Textured &Walls"
msgstr "&Wandtextur"

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
#. instead if it gives a better translation which most users will understand.
#: ../src/mainfrm.cc:801
msgid "Fade Distant Ob&jects"
msgstr "D&unsteffekt"

#. TRANSLATORS: View *looking* North
#: ../src/mainfrm.cc:744
msgid "View &North"
msgstr "Nach &Norden"

#. TRANSLATORS: View *looking* East
#: ../src/mainfrm.cc:745
msgid "View &East"
msgstr "Nach &Osten"

#. TRANSLATORS: View *looking* South
#: ../src/mainfrm.cc:746
msgid "View &South"
msgstr "Nach &Süden"

#. TRANSLATORS: View *looking* West
#: ../src/mainfrm.cc:747
msgid "View &West"
msgstr "Nach &Westen"

#: ../src/mainfrm.cc:749
msgid "Shift Survey &Left"
msgstr "Verschieben nach &links"

#: ../src/mainfrm.cc:750
msgid "Shift Survey &Right"
msgstr "Verschieben nach &rechts"

#: ../src/mainfrm.cc:751
msgid "Shift Survey &Up"
msgstr "Verschieben nach o&ben"

#: ../src/mainfrm.cc:752
msgid "Shift Survey &Down"
msgstr "Verschieben nach &unten"

#: ../src/mainfrm.cc:754
msgid "&Plan View"
msgstr "&Grundriß"

#: ../src/mainfrm.cc:755
msgid "Ele&vation"
msgstr "&Aufriß"

#: ../src/mainfrm.cc:757
msgid "&Higher Viewpoint"
msgstr "&Höherer Standort"

#: ../src/mainfrm.cc:758
msgid "L&ower Viewpoint"
msgstr "Nie&drigerer Standort"

#: ../src/mainfrm.cc:760
msgid "&Zoom In\t]"
msgstr "&Vergrößern\t]"

#: ../src/mainfrm.cc:761
msgid "Zoo&m Out\t["
msgstr "Ver&kleinern\t["

#: ../src/mainfrm.cc:763
msgid "Restore De&fault View"
msgstr "&Zurück zur voreingestellten Ansicht"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn't a
#. good name for this but nothing better has yet come to mind!
#: ../src/printwx.cc:215
msgid "Elements"
msgstr "Elemente"

#: ../src/printwx.cc:234
#: ../src/printwx.cc:421
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d Seiten (%dx%d)"

#. TRANSLATORS: used in the scale drop down selector in the print dialog
#. the implicit meaning is "choose a suitable scale to fit the
#. plot on a single page", but we need something shorter
#: ../src/printwx.cc:221
#: ../src/printwx.cc:453
msgid "One page"
msgstr "Eine Seite"

#: ../src/printwx.cc:241
msgid "Bearing"
msgstr "Richtung"

#: ../src/printwx.cc:271
msgid "Station Names"
msgstr "Messpunktnamen"

#: ../src/printwx.cc:269
msgid "Crosses"
msgstr "Kreuze"

#: ../src/printwx.cc:265
msgid "Underground Survey Legs"
msgstr "Strecken unter Grund"

#. TRANSLATORS: Used in the print dialog:
#: ../src/printwx.cc:246
msgid "Tilt angle"
msgstr "Neigung"

#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
#: ../src/printwx.cc:274
msgid "Page Borders"
msgstr "Seitenrahmen"

#. TRANSLATORS: used in the print dialog - controls drawing the box at the lower left
#. with survey name, view angles, etc
#: ../src/printwx.cc:278
msgid "Info Box"
msgstr "Legende"

#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
#. (otherwise they'll be skipped to save paper)
#: ../src/printwx.cc:276
msgid "Blank Pages"
msgstr "Leerseiten"

#: ../src/mainfrm.cc:777
msgid "Station &Names\tCtrl+N"
msgstr "Messpunkt&namen\tCtrl+N"

#: ../src/mainfrm.cc:779
msgid "&Crosses\tCtrl+X"
msgstr "Kreu&ze\tCtrl+X"

#: ../src/mainfrm.cc:783
msgid "&Underground Survey Legs\tCtrl+L"
msgstr "&Strecken unter Grund\tCtrl+L"

#: ../src/mainfrm.cc:786
msgid "&Overlapping Names"
msgstr "Über&lappende Namen"

#: ../src/mainfrm.cc:817
msgid "&Compass"
msgstr "&Kompass"

#: ../src/mainfrm.cc:818
msgid "C&linometer"
msgstr "&Neigungsanzeige"

#: ../src/mainfrm.cc:819
msgid "&Depth Bar"
msgstr "&Tiefenskala"

#: ../src/mainfrm.cc:820
msgid "&Scale Bar"
msgstr "&Maßstab"

#: ../src/mainfrm.cc:812
msgid "&Reverse Sense\tCtrl+R"
msgstr "Richtung &umkehren\tCtrl+R"

#: ../src/mainfrm.cc:796
#: ../src/mainfrm.cc:814
msgid "&Cancel Measuring Line\tEscape"
msgstr "Messlinie &abschalten\tEscape"

#: ../src/mainfrm.cc:789
msgid "Colour by E&rror"
msgstr "Anhand Fehle&rn einfärben"

#: ../src/mainfrm.cc:829
msgid "&About…"
msgstr "Ü&ber…"

#: ../src/mainfrm.cc:784
msgid "&Surface Survey Legs\tCtrl+F"
msgstr "Messzüge Oberfläc&he\tCtrl+F"

#: ../src/mainfrm.cc:787
msgid "Colour by &Depth"
msgstr "Farbe je nach &Tiefe"

#: ../src/mainfrm.cc:788
msgid "Colour by D&ate"
msgstr "Farbe je nach &Datum"

#: ../src/mainfrm.cc:791
msgid "Highlight &Entrances"
msgstr "&Eingänge hervorheben"

#: ../src/mainfrm.cc:792
msgid "Highlight &Fixed Points"
msgstr "&Festpunkte hervorheben"

#: ../src/mainfrm.cc:793
msgid "Highlight E&xported Points"
msgstr "Exp&ortierte Punkte hervorheben"

#: ../src/mainfrm.cc:780
msgid "&Grid\tCtrl+G"
msgstr "&Gitter\tCtrl+G"

#: ../src/mainfrm.cc:802
msgid "Smoot&hed Survey Legs"
msgstr "Geglättete &Messzüge"

#: ../src/mainfrm.cc:821
msgid "&Indicators"
msgstr "&Richtungsanzeiger"

#: ../src/z_getopt.c:695
#: ../src/z_getopt.c:707
#, c-format
msgid "%s: option `%s' is ambiguous\n"
msgstr "%s: Die Option `%s' ist nicht eindeutig\n"

#: ../src/z_getopt.c:1023
#: ../src/z_getopt.c:1034
#, c-format
msgid "%s: option `-W %s' is ambiguous\n"
msgstr "%s: Die Option `-W %s' ist nicht eindeutig\n"

#: ../src/z_getopt.c:751
#: ../src/z_getopt.c:755
#, c-format
msgid "%s: option `%c%s' doesn't allow an argument\n"
msgstr "%s: Die Option `%c%s' erlaubt kein Argmuent\n"

#: ../src/z_getopt.c:740
#: ../src/z_getopt.c:743
#, c-format
msgid "%s: option `--%s' doesn't allow an argument\n"
msgstr "%s: Die Option `--%s' erlaubt kein Argmuent\n"

#: ../src/z_getopt.c:1058
#: ../src/z_getopt.c:1069
#, c-format
msgid "%s: option `-W %s' doesn't allow an argument\n"
msgstr "%s: Die Option `-W %s' erlaubt kein Argmuent\n"

#: ../src/z_getopt.c:790
#: ../src/z_getopt.c:802
#: ../src/z_getopt.c:1089
#: ../src/z_getopt.c:1101
#, c-format
msgid "%s: option `%s' requires an argument\n"
msgstr "%s: Option `%s' benötigt ein Argument\n"

#: ../src/z_getopt.c:960
#: ../src/z_getopt.c:971
#: ../src/z_getopt.c:1154
#: ../src/z_getopt.c:1166
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: Die Option verlangt ein Argmuent -- %c\n"

#: ../src/z_getopt.c:840
#: ../src/z_getopt.c:843
#, c-format
msgid "%s: unrecognized option `--%s'\n"
msgstr "%s: unbekannte Option `--%s'\n"

#: ../src/z_getopt.c:851
#: ../src/z_getopt.c:854
#, c-format
msgid "%s: unrecognized option `%c%s'\n"
msgstr "%s: unbekannte Option `%c%s'\n"

#: ../src/z_getopt.c:901
#: ../src/z_getopt.c:904
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: unzulässige Option -- %c\n"

#: ../src/z_getopt.c:910
#: ../src/z_getopt.c:913
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: ungültige Option -- %c\n"

#: ../src/mainfrm.cc:766
msgid "&New Presentation"
msgstr "&Neue Präsentation"

#: ../src/mainfrm.cc:767
msgid "&Open Presentation…"
msgstr "&Präsentation öffnen…"

#: ../src/mainfrm.cc:768
msgid "&Save Presentation"
msgstr "Präsentation &speichern"

#: ../src/mainfrm.cc:769
msgid "Sa&ve Presentation As…"
msgstr "Präsentation speichern &als…"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:771
msgid "&Mark"
msgstr "&Markieren"

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:772
msgid "Pla&y"
msgstr "Abspie&len"

#. TRANSLATORS: de: "als Animation" could also be used here.
#: ../src/mainfrm.cc:773
msgid "&Export as Movie…"
msgstr "&Exportieren als Film…"

#: ../src/mainfrm.cc:781
msgid "&Bounding Box\tCtrl+B"
msgstr "&Begrenzendes Rechteck\tCtrl+B"

#. TRANSLATORS: TRANSLATE: ro
#: ../src/mainfrm.cc:309
msgid "Select an output filename"
msgstr "Name der Ausgabedatei wählen"

#: ../src/mainfrm.cc:306
#: ../src/mainfrm.cc:2095
msgid "Aven presentations"
msgstr "Aven Präsentationen"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1714
msgid "Save Screenshot"
msgstr "Bildschirmabzug speichern"

#: ../src/mainfrm.cc:2090
#: ../src/mainfrm.cc:2093
msgid "Select a presentation to open"
msgstr "Zu öffnende Präsentation auswählen"

#: ../src/mainfrm.cc:388
#, c-format
msgid "Error in format of presentation file `%s'"
msgstr "Formatfehler in der Präsentationsdatei `%s'"

#. TRANSLATORS: "Compass" as in Larry Fish's cave surveying package, so probably shouldn't
#. be translated
#: ../src/mainfrm.cc:1694
msgid "Compass PLT files"
msgstr "Compass PLT Datei"

#. TRANSLATORS: "CMAP" is Bob Thrun's cave surveying package, so don't translate it.
#: ../src/mainfrm.cc:1696
msgid "CMAP XYZ files"
msgstr "CAMP XYZ Datei"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1770
#: ../src/mainfrm.cc:2067
#: ../src/mainfrm.cc:2084
msgid "Modified Presentation"
msgstr "Modifizierte Präsentation"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1769
#: ../src/mainfrm.cc:2066
#: ../src/mainfrm.cc:2083
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "Die aktuelle Präsentation wurde verändert. Abbrechen, ohne die Änderungen zu speichern?"

#: ../src/mainfrm.cc:2372
#: ../src/mainfrm.cc:2381
msgid "No matches were found."
msgstr "Kein Treffer gefunden."

#. TRANSLATORS: UNUSED
msgid "Open &Terrain…"
msgstr "Gelände&modell öffnen…"

#. TRANSLATORS: UNUSED
msgid "Solid Su&rface"
msgstr "&Durchgezogene Oberfläche"

#. TRANSLATORS: number of stations found matching search
#, c-format
msgid "%d found"
msgstr "%d gefunden"

#. TRANSLATORS: "Find stations" button label
#: ../src/mainfrm.cc:894
msgid "Find"
msgstr "Suchen"

#. TRANSLATORS: "Hide stations" button label
#: ../src/mainfrm.cc:896
msgid "Hide"
msgstr "Unterdrücken"

#. TRANSLATORS: checkbox for regular expression search
#: ../src/mainfrm.cc:914
msgid "Regular expression"
msgstr "Regulärer Ausdruck"

#: ../src/mainfrm.cc:193
#: ../src/mainfrm.cc:1843
#: ../src/mainfrm.cc:1847
#: ../src/mainfrm.cc:1912
#: ../src/mainfrm.cc:1914
#: ../src/mainfrm.cc:1957
#: ../src/mainfrm.cc:1961
msgid "Altitude"
msgstr "Höhe"

#. TRANSLATORS: error if you try to drag multiple files to the aven window
#: ../src/mainfrm.cc:654
msgid "You may only view one 3d file at a time."
msgstr "Es kann nur eine 3D-Datei zugleich angezeigt werden."

#: ../src/mainfrm.cc:822
msgid "&Side Panel"
msgstr "&Seitliches Kontrollfeld"

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
#. de: alternatively "%.2f O, %.2f N", but H/R is consistent with headings in pos files
#: ../src/mainfrm.cc:1842
#: ../src/mainfrm.cc:1845
#: ../src/mainfrm.cc:1868
#: ../src/mainfrm.cc:1870
#: ../src/mainfrm.cc:1956
#: ../src/mainfrm.cc:1959
msgid "%.2f E, %.2f N"
msgstr "%.2f H, %.2f R"

#. TRANSLATORS: Used in Aven:
#. From <stationname>
#. H: 123.45m V: 234.56m
#. Dist: 456.78m  Brg: 200
#: ../src/mainfrm.cc:1885
#: ../src/mainfrm.cc:1924
#: ../src/mainfrm.cc:1980
#, c-format
msgid "From %s"
msgstr "Von %s aus"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:1984
#: ../src/mainfrm.cc:1987
#, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "H %.2f%s, V %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:2000
#: ../src/mainfrm.cc:2004
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
msgstr "%s: %s, Dist %.2f%s, Richt. %03d%s"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/mainfrm.cc:824
msgid "&Metric"
msgstr "&Metrisch"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/mainfrm.cc:825
msgid "&Degrees"
msgstr "&Grad"

#. TRANSLATORS: alternative angle units (400 grad = 360 degrees)
#. try to make this as short as possible...
#: ../src/mainfrm.cc:1892
#: ../src/mainfrm.cc:1996
msgid "grad"
msgstr "Neugrad"

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:778
msgid "Passage &Tubes\tCtrl+T"
msgstr "Passage Tubes (&y)\tCtrl+T"

#: ../src/mainfrm.cc:807
msgid "&Preferences…"
msgstr "&Einstellungen…"

#: ../src/tubeprefs.cc:37
msgid "Draw passage walls"
msgstr "Wände einzeichnen"

#: ../src/tubeprefs.cc:39
msgid "Estimate LRUD readings based on heuristics"
msgstr "LROU-Werte heuristisch schätzen"

#: ../src/stnprefs.cc:62
msgid "Mark survey stations with crosses"
msgstr "Messpunkte durch Kreuze markieren"

#: ../src/stnprefs.cc:63
msgid "Highlight stations marked as entrances"
msgstr "Punkte an den Eingängen hervorheben"

#: ../src/stnprefs.cc:65
msgid "Highlight stations marked as fixed points"
msgstr "Festpunkte hervorheben"

#: ../src/stnprefs.cc:66
msgid "Highlight stations which are exported"
msgstr "Exportierte Punkte hervorheben"

#: ../src/stnprefs.cc:67
msgid "Mark survey stations with their names"
msgstr "Messpunkte mit ihren Namen beschriften"

#: ../src/stnprefs.cc:69
msgid "Allow names to overlap on the display (faster)"
msgstr "Überlappende Beschriftungen zulassen (schneller)"

#: ../src/mainfrm.cc:804
msgid "Full Screen &Mode\tF11"
msgstr "&Vollbild-Modus\tF11"

#: ../src/legprefs.cc:39
msgid "Display underground survey legs"
msgstr "Strecken unter Grund anzeigen"

#: ../src/legprefs.cc:40
msgid "Display surface survey legs"
msgstr "Oberflächenstrecken anzeigen"

msgid "Colour surface surveys by depth"
msgstr "Oberflächenvermessung nach Höhe einfärben"

msgid "Draw surface legs with dashed lines"
msgstr "Oberflächenstrecken gestrichelt zeichnen"

#: ../src/gridprefs.cc:36
msgid "Draw a grid"
msgstr "Gitter einzeichnen"

#: ../src/unitsprefs.cc:44
msgid "metric units"
msgstr "Meter"

#: ../src/unitsprefs.cc:46
msgid "imperial units"
msgstr "englische Einheiten"

#: ../src/unitsprefs.cc:47
msgid "degrees (°)"
msgstr "Altgrad (°)"

#: ../src/unitsprefs.cc:49
msgid "grads"
msgstr "Neugrad (gon)"

#: ../src/unitsprefs.cc:53
msgid "Display measurements in"
msgstr "Längen anzeigen in"

#: ../src/unitsprefs.cc:61
msgid "Display angles in"
msgstr "Winkel anzeigen in"

#. TRANSLATORS: reverses the sense of the mouse controls
#: ../src/ctlprefs.cc:38
msgid "Reverse the sense of the controls"
msgstr "Maus-Steuerung umkehren"

#: ../src/indicatorprefs.cc:39
msgid "Display scale bar"
msgstr "Maßstab anzeigen"

#: ../src/indicatorprefs.cc:40
msgid "Display depth bar"
msgstr "Tiefenskala anzeigen"

#: ../src/indicatorprefs.cc:41
msgid "Display compass"
msgstr "Kompass anzeigen"

#: ../src/indicatorprefs.cc:42
msgid "Display clinometer"
msgstr "Neigungsmesser anzeigen"

#: ../src/winprefs.cc:42
msgid "Display side panel"
msgstr "Seitliches Kontrollfeld anzeigen"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:1896
#: ../src/mainfrm.cc:1899
#, c-format
msgid "%s: H %.2f%s, Brg %03d%s"
msgstr "%s: H %.2f%s, Richt. %03d%s"

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:1927
#: ../src/mainfrm.cc:1930
#, c-format
msgid "%s: V %.2f%s"
msgstr "%s: V %.2f%s"

#. TRANSLATORS: labels for tabbed side panel
#. this is for the tab with the tree hierarchy of survey station names
#: ../src/mainfrm.cc:947
msgid "Surveys"
msgstr "Vermessung"

#: ../src/mainfrm.cc:948
msgid "Presentation"
msgstr "Präsentation"

#: ../src/mainfrm.cc:191
msgid "Easting"
msgstr "Rechtswert"

#: ../src/mainfrm.cc:192
msgid "Northing"
msgstr "Hochwert"

#: ../src/mainfrm.cc:717
msgid "&Print…\tCtrl+P"
msgstr "&Drucken…\tCtrl+P"

#: ../src/mainfrm.cc:718
msgid "P&age Setup…"
msgstr "&Seite einrichten…"

#: ../src/mainfrm.cc:721
msgid "&Export as…"
msgstr "&Exportieren als…"

#. TRANSLATORS: Title of the export dialog
#: ../src/printwx.cc:171
msgid "Export"
msgstr "Exportieren"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:134
msgid "System Information:"
msgstr "Systeminformation:"

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printwx.cc:355
msgid "Print Preview"
msgstr "Druckvorschau"

#. TRANSLATORS: Title of the print dialog
#: ../src/printwx.cc:171
msgid "Print"
msgstr "Drucken"

#: ../src/printwx.cc:293
#: ../src/printwx.cc:295
msgid "&Print…"
msgstr "&Drucken…"

#: ../src/printwx.cc:291
msgid "Pre&view"
msgstr "&Vorschau"

#: ../src/printwx.cc:287
msgid "&Cancel"
msgstr "&Abbrechen"

#: ../src/printwx.cc:267
msgid "Sur&face Survey Legs"
msgstr "Messzüge Ober&fläche"

#. TRANSLATORS: "%s" is replaced by the invalid expression
#, c-format
msgid "Invalid regular expression: %s"
msgstr "Ungültiger regulärer Ausdruck: %s"

#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
#. things in future).
#: ../src/aven.cc:207
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn't available."
msgstr "Diese Version von %s benötigt zum Funktionieren OpenGL, was jedoch nicht verfügbar ist."

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:158
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr "Verschoben um (%3.2f,%3.2f,%3.2f): %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:194
#, c-format
msgid "Added: %s"
msgstr "Hinzugefügt: %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:216
#, c-format
msgid "Deleted: %s"
msgstr "Entfernt: %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this station, but we didn't find it in the 3d file
#: ../src/extend.c:258
#: ../src/extend.c:275
#: ../src/extend.c:315
#: ../src/extend.c:355
#: ../src/extend.c:395
#, c-format
msgid "Failed to find station %s"
msgstr "Messpunkt konnte nicht gefunden werden: %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this leg, but we didn't find it in the 3d file
#: ../src/extend.c:297
#: ../src/extend.c:337
#: ../src/extend.c:377
#: ../src/extend.c:417
#, c-format
msgid "Failed to find leg %s → %s"
msgstr "Messstrecke konnte nicht gefunden werden: %s → %s"

#. TRANSLATORS: for extend:
#. "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:252
#, c-format
msgid "Starting from station %s"
msgstr "Bei diesem Messpunkt wird begonnen: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:268
#, c-format
msgid "Extending to the left from station %s"
msgstr "Von diesem Messpunkt aus nach links erweitern: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:308
#, c-format
msgid "Extending to the right from station %s"
msgstr "Von diesem Messpunkt aus nach rechts erweitern: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:287
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr "Von dieser Messstrecke aus nach links erweitern: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:327
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr "Von dieser Messstrecke aus nach rechts erweitern: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:388
#, c-format
msgid "Breaking survey loop at station %s"
msgstr "Messschleife wird an diesem Messpunkt unterbrochen: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:407
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr "Messschleife wird an dieser Messstrecke unterbrochen: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:348
#, c-format
msgid "Swapping extend direction from station %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:367
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:536
#, c-format
msgid "Applying specfile: `%s'"
msgstr ""

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:596
#, c-format
msgid "Writing %s…"
msgstr "%s wird geschrieben…"