source: git/lib/sk.po @ 08e858b

line_contentsproj-api-updatestereo
Last change on this file since 08e858b was 08e858b, checked in by Olly Betts <olly@…>, 9 years ago

lib/,src/avenprcore.cc,src/printwx.cc: Change term "info box" to
"legend".

  • Property mode set to 100644
File size: 72.7 KB
Line 
1msgid ""
2msgstr ""
3"Project-Id-Version: survex\n"
4"Report-Msgid-Bugs-To: olly@survex.com\n"
5"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6"PO-Revision-Date: 2014-01-16 03:17:10 +0000\n"
7"Last-Translator: Martin Sluka <martinsluka@mac.com>\n"
8"Language-Team: \n"
9"MIME-Version: 1.0\n"
10"Content-Type: text/plain; charset=utf-8\n"
11"Content-Transfer-Encoding: 8bit\n"
12"Language: sk\n"
13
14#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
15#. allocate space for.
16#: ../src/message.c:83
17#: n:1
18#, c-format
19msgid "Out of memory (couldn’t find %lu bytes)."
20msgstr "Nedostatok pamäte (chýba %lu bytov)."
21
22#. TRANSLATORS: Feel free to translate as "or newer" instead of "or greater" if that
23#. gives a more natural translation.  It's technically not quite right when there are
24#. parallel active release series (e.g. Survex 1.0.40 was released *after* 1.2.0), but
25#. this seems unlikely to confuse users.
26#: ../src/commands.c:1567
27#: n:2
28#, c-format
29msgid "Survex version %s or greater required to process this survey data."
30msgstr "Pre spracovanie týchto dát je potrebná verzia Survexu %s alebo novšia."
31
32#. TRANSLATORS: Indicates a warning message e.g.:
33#. "spoon.svx:12: warning: *prefix is deprecated"
34#: ../src/aven.cc:365
35#: ../src/message.c:1215
36#: n:4
37msgid "warning"
38msgstr "varovanie"
39
40#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u by
41#. the line number in that file.
42#: ../src/datain.c:105
43#: n:5
44#, c-format
45msgid "In file included from %s:%u:\n"
46msgstr "V súbore vloženom z %s:%u:\n"
47
48#. TRANSLATORS: If you're unsure what "deprecated" means, see:
49#. http://en.wikipedia.org/wiki/Deprecation
50#: ../src/commands.c:535
51#: n:6
52msgid "*prefix is deprecated - use *begin and *end instead"
53msgstr "*prefix bol odmietnutý - použijte namiesto toho *begin a *end"
54
55#. TRANSLATORS: Here "station" is a survey station, not a train station.
56#: ../src/readval.c:205
57#: n:7
58#, c-format
59msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
60msgstr "Znak “%c” v mene bodu nie je povolený (použijte *SET NAMES pre nastavenie povolených znakov)"
61
62#: ../src/readval.c:384
63#: n:8
64msgid "Field may not be omitted"
65msgstr "Pole by nemalo zostať nevyplnené"
66
67#: ../src/datain.c:1469
68#: ../src/datain.c:1749
69#: ../src/readval.c:386
70#: ../src/readval.c:427
71#: ../src/readval.c:457
72#: n:9
73#, c-format
74msgid "Expecting numeric field, found “%s”"
75msgstr "predpokladá sa numerické pole, zistené “%s”"
76
77#: ../src/commands.c:1473
78#: n:10
79#, c-format
80msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
81msgstr "Zistené “%s”, predpokladá sa “PRESERVE”, “TOUPPER” alebo “TOLOWER”"
82
83#: ../src/debug.h:45
84#: ../src/debug.h:47
85#: ../src/matrix.c:352
86#: ../src/message.c:233
87#: n:11
88msgid "Bug in program detected! Please report this to the authors"
89msgstr "Zistená chyba programu! Prosíme, dajte to na vedomie autorom"
90
91#: ../src/commands.c:1681
92#: ../src/extend.c:420
93#: n:12
94#, c-format
95msgid "Unknown command “%s”"
96msgstr "Neznámy príkaz “%s”"
97
98#. TRANSLATORS: Here "station" is a survey station, not a train station.
99#: ../src/netbits.c:401
100#: n:13
101#, c-format
102msgid "Station “%s” equated to itself"
103msgstr "Bod “%s” je totožný sám so sebou"
104
105#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between survey stations.
106#: ../src/datain.c:997
107#: n:14
108msgid "Compass reading may not be omitted except on plumbed legs"
109msgstr "Nemalo by chýbať čítanie kompasu pokiaľ nejde o vertikálnu zámeru"
110
111#: ../src/datain.c:244
112#: ../src/extend.c:425
113#: n:15
114msgid "End of line not blank"
115msgstr "Koniec riadku obsahuje nepatričný znak"
116
117#: ../src/cavern.c:385
118#: n:16
119#, c-format
120msgid "There were %d warning(s)."
121msgstr "Celkom bolo zaznamenaných %d varovaní."
122
123#. TRANSLATORS: %s is replaced by the command we attempted to run.
124#: ../src/cavernlog.cc:174
125#: ../src/cavernlog.cc:232
126#: n:17
127#, fuzzy, c-format
128msgid "Couldn’t run external command: “%s”"
129msgstr "Nepodarilo sa otvoriť “pipe”: “%s”"
130
131#: ../src/datain.c:80
132#: ../src/datain.c:88
133#: ../src/datain.c:95
134#: ../src/datain.c:730
135#: ../src/extend.c:541
136#: ../src/sorterr.c:75
137#: ../src/sorterr.c:92
138#: ../src/sorterr.c:234
139#: n:18
140msgid "Error reading file"
141msgstr "Chyba pri čítaní súboru"
142
143#: ../src/message.c:1230
144#: n:19
145msgid "Too many errors - giving up"
146msgstr "Príliš mnoho chýb, koniec"
147
148#. TRANSLATORS: If you're unsure what "deprecated" means, see:
149#. http://en.wikipedia.org/wiki/Deprecation
150#: ../src/commands.c:1352
151#: n:20
152msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
153msgstr "*DEFAULT bol odmietnutý - použijte namiesto toho *CALIBRATE/DATA/SD/UNITS s argumentom DEFAULT"
154
155#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
156#. So the problem here is that the leg is vertical, so a compass reading has
157#. no meaning!
158#: ../src/datain.c:970
159#: n:21
160msgid "Compass reading given on plumbed leg"
161msgstr "Pri vertikálnej zámere bol zadaný azimut"
162
163#: ../src/commands.c:619
164#: n:22
165msgid "END with no matching BEGIN in this file"
166msgstr "V tomto súbore sa vyskytlo END bez odpovadajúceho BEGIN"
167
168#: ../src/datain.c:717
169#: n:23
170msgid "BEGIN with no matching END in this file"
171msgstr "V tomto súbore sa vyskytlo BEGIN bez odpovadajúceho END"
172
173#: ../src/datain.c:361
174#: ../src/img_hosted.c:30
175#: ../src/printwx.cc:1456
176#: n:24
177#, c-format
178msgid "Couldn’t open data file “%s”"
179msgstr "Nie je možné otvoriť datový súbor “%s”"
180
181#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
182#. deprecated, so this error would be generated by:
183#.
184#. *equate \foo.7 1
185#.
186#. If you're unsure what "deprecated" means, see:
187#. http://en.wikipedia.org/wiki/Deprecation
188#: ../src/commands.c:444
189#: ../src/readval.c:90
190#: ../src/readval.c:94
191#: n:25
192msgid "ROOT is deprecated"
193msgstr "ROOT bol zamietnutý"
194
195#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
196#. "Station “\outer.inner.1” not exported from survey “\outer”)":
197#. *equate entrance outer.inner.1
198#. *begin outer
199#. *begin inner
200#. *export 1
201#. 1 2 1.23 045 -6
202#. *end inner
203#. *end outer
204#: ../src/commands.c:861
205#: ../src/listpos.c:107
206#: ../src/readval.c:324
207#: n:26
208#, c-format
209msgid "Station “%s” not exported from survey “%s”"
210msgstr "Bod “%s” nebol exportovaný z merania (survey) “%s”"
211
212#. TRANSLATORS: This error occurs if there's an attempt to export a station
213#. from a survey which doesn't actually exist.
214#: ../src/listpos.c:110
215#: n:286
216#, c-format
217msgid "Reference to station “%s” from non-existent survey “%s”"
218msgstr "Odkaz na bod “%s” z neexistujúceho survey “%s”"
219
220#: ../src/readval.c:296
221#: n:27
222#, c-format
223msgid "“%s” can’t be both a station and a survey"
224msgstr "“%s” nemôže byť súčasne bodom i meraním (survey)"
225
226#: ../src/extend.c:247
227#: ../src/extend.c:262
228#: ../src/extend.c:302
229#: ../src/extend.c:342
230#: ../src/extend.c:382
231#: ../src/readval.c:202
232#: n:28
233msgid "Expecting station name"
234msgstr "Predpokladá sa meno bodu"
235
236#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
237#.
238#. If you're unsure what "deprecated" means, see:
239#. http://en.wikipedia.org/wiki/Deprecation
240#: ../src/commands.c:507
241#: n:29
242msgid "Reentering an existing prefix level is deprecated"
243msgstr "Opakované vloženie existujúcej úrovne prefixu nie je povolené"
244
245#: ../src/commands.c:514
246#: n:30
247msgid "Originally entered here"
248msgstr "Pôvodne vložené sem"
249
250#: ../src/commands.c:1503
251#: n:31
252#, c-format
253msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
254msgstr "Zistené “%s”, predpokladané “EQUATES”, “EXPORTS” alebo “PLUMBS”"
255
256#: ../src/commands.c:1510
257#: n:32
258#, c-format
259msgid "Found “%s”, expecting “ON” or “OFF”"
260msgstr "Zistené “%s”, predpokladané “ON” alebo “OFF”"
261
262#. TRANSLATORS: EQUATE is a command name, so shouldn’t be translated.
263#: ../src/commands.c:834
264#: n:33
265msgid "Only one station in EQUATE command"
266msgstr "V zozname EQUATE zistený iba jeden bod"
267
268#: ../src/commands.c:398
269#: n:34
270#, c-format
271msgid "Unknown quantity “%s”"
272msgstr "Neznáma hodnota “%s”"
273
274#: ../src/commands.c:318
275#: n:35
276#, c-format
277msgid "Unknown units “%s”"
278msgstr "Neznáma jednotka “%s”"
279
280#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
281#. *begin
282#. 1 2 10.00 178 -01
283#. *end entrance      <--[Message given here]
284#: ../src/commands.c:636
285#: n:36
286msgid "Matching BEGIN tag has no prefix"
287msgstr "Odpovedajúci tag BEGIN nemá prefix"
288
289#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
290#. the correct term in other languages may be singular.
291#: ../src/commands.c:328
292#: n:37
293#, c-format
294msgid "Invalid units “%s” for quantity"
295msgstr "Nesprávna jednotka “%s” pre hodnotu"
296
297#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
298#. a filename parameter - we don’t really want it here, so lose it with "%.0s"
299#. (which should display 0 characters from the filename) FIXME: sort out this
300#: ../src/img_hosted.c:31
301#: n:38
302msgid "Out of memory %.0s"
303msgstr "Nedostatočná pamäť %.0s"
304
305#: ../src/commands.c:391
306#: n:39
307#, c-format
308msgid "Unknown instrument “%s”"
309msgstr "Neznáma pomôcka “%s”"
310
311#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
312#: ../src/commands.c:1324
313#: n:40
314msgid "Scale factor must be 1.0 for DECLINATION"
315msgstr "Prepočítací faktor pre DECLINATION musí byť 1.0"
316
317#. TRANSLATORS: If the scale factor for an instrument is zero, then any reading
318#. would be mapped to zero, which doesn't make sense.
319#: ../src/commands.c:1328
320#: n:391
321msgid "Scale factor must be non-zero"
322msgstr "Prepočítací faktor musí byť nenulový"
323
324#: ../src/commands.c:1371
325#: n:41
326#, c-format
327msgid "Unknown setting “%s”"
328msgstr "Neznáme nastavenie “%s”"
329
330#: ../src/commands.c:436
331#: n:42
332#, c-format
333msgid "Unknown character class “%s”"
334msgstr "Neznáma trieda charakteru “%s”"
335
336#: ../src/extend.c:587
337#: ../src/netskel.c:90
338#: n:43
339msgid "No survey data"
340msgstr "Chýbajú údaje z merania"
341
342#: ../src/filename.c:52
343#: ../src/img_hosted.c:32
344#: n:44
345#, c-format
346msgid "Filename “%s” refers to directory"
347msgstr "Meno súboru “%s” odpovedá adresáru"
348
349#: ../src/netartic.c:384
350#: n:45
351msgid "Survey not all connected to fixed stations"
352msgstr "Časti merania nie sú pripojené na fixné body"
353
354#: ../src/commands.c:770
355#: ../src/datain.c:643
356#: n:46
357msgid "Station already fixed or equated to a fixed point"
358msgstr "Bod je už fixný alebo je totožný s fixným bodom"
359
360#: ../src/cavern.c:288
361#: ../src/filename.c:55
362#: ../src/img_hosted.c:33
363#: n:47
364#, c-format
365msgid "Failed to open output file “%s”"
366msgstr "Zlyhal pokus o otvorenie výstupného súboru  “%s”"
367
368#: ../src/commands.c:1426
369#: n:48
370msgid "Standard deviation must be positive"
371msgstr "Štandardná ochylka musí byť pozitívna"
372
373#. TRANSLATORS: as in: Usage: cavern …
374#: ../src/cmdline.c:165
375#: n:49
376msgid "Usage"
377msgstr "Použitie"
378
379#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
380#. "survey stations".
381#.
382#. %s is replaced by the name of the station.
383#: ../src/netbits.c:329
384#: n:50
385#, c-format
386msgid "Survey leg with same station (“%s”) at both ends - typing error?"
387msgstr "Zámera s tým istým bodom (“%s”) na oboch koncoch - preklep?"
388
389#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
390#. full circle.
391#: ../src/datain.c:923
392#: ../src/datain.c:931
393#: ../src/datain.c:943
394#: n:51
395msgid "Clino reading over 90 degrees (absolute value)"
396msgstr "Absolútna hodnota sklonu väčšia ako 90 stupňov"
397
398#: ../src/netbits.c:416
399#: n:52
400#, c-format
401msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
402msgstr "Pokus o ztotožnenie dvoch rôznych fixných bodov “%s” a “%s”"
403
404#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
405#: ../src/netbits.c:422
406#: n:53
407#, c-format
408msgid "Equating two equal fixed points: “%s” and “%s”"
409msgstr "Ztotožnenie dvoch identických fixných bodov “%s” a “%s”"
410
411#. TRANSLATORS: " *fix a " gives this message:
412#: ../src/commands.c:693
413#: n:54
414msgid "FIX command with no coordinates - fixing at (0,0,0)"
415msgstr "Príkaz FIX bez odpovedajúcich súradníc - priradené (0,0,0)"
416
417#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
418#: ../src/commands.c:773
419#: ../src/datain.c:645
420#: n:55
421msgid "Station already fixed at the same coordinates"
422msgstr "Bod už bol fixovaný s tými istými súradnicami"
423
424#: ../src/commands.c:686
425#: n:56
426msgid "More than one FIX command with no coordinates"
427msgstr "Viac ako jeden príkaz FIX bez súradníc"
428
429#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
430#. would generate error 57:
431#. *begin fred
432#. 1 2 1.23 045 -6
433#. *export 2
434#. *end fred
435#: ../src/commands.c:1688
436#: n:57
437msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
438msgstr "*EXPORT musí bezprostredne nasledovať “*BEGIN <SURVEY>”"
439
440#: ../src/readval.c:514
441#: n:58
442msgid "Invalid year (< 1900 or > 2078)"
443msgstr "Neplatný rok (< 1900 alebo > 2078)"
444
445#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
446#: ../src/datain.c:825
447#: ../src/datain.c:834
448#: n:59
449msgid "Suspicious compass reading"
450msgstr "Podozrivé čítanie kompasu"
451
452#: ../src/datain.c:1445
453#: n:60
454msgid "Negative tape reading"
455msgstr "Záporný dļžkový údaj"
456
457#: ../src/commands.c:688
458#: n:61
459msgid "Same station fixed twice with no coordinates"
460msgstr "Niektorý z bodov bol fixovaný dvakrát bez súradníc"
461
462#. TRANSLATORS: This means that the data fed in said this.
463#. It could be a gross error (e.g. the decimal point is missing from
464#. the depth gauge reading) or it could just be due to random error on
465#. a near vertical leg
466#: ../src/datain.c:1144
467#: n:62
468msgid "Tape reading is less than change in depth"
469msgstr "Dļžkový údaj je menší ako výškový rozdiel"
470
471#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
472#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
473#. neither style nor reading is a keyword in the program
474#. This error complains about a depth gauge reading in normal style, for example
475#: ../src/commands.c:1069
476#: n:63
477#, c-format
478msgid "Reading “%s” not allowed in data style “%s”"
479msgstr "Hodnota “%s” nie je povolená v type dát “%s”"
480
481#. TRANSLATORS: i.e. not enough readings for the style.
482#: ../src/commands.c:1238
483#: n:64
484#, c-format
485msgid "Too few readings for data style “%s”"
486msgstr "Príliš málo údajov pre typ dát “%s”"
487
488#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
489#: ../src/commands.c:1034
490#: n:65
491#, c-format
492msgid "Data style “%s” unknown"
493msgstr "Neznámy typ dát “%s”"
494
495#. TRANSLATORS: Here "station" is a survey station, not a train station.
496#.
497#. Exporting a station twice give error 66:
498#. *begin example
499#. *export 1
500#. *export 1
501#. 1 2 1.24 045 -6
502#. *end example
503#: ../src/commands.c:905
504#: n:66
505#, c-format
506msgid "Station “%s” already exported"
507msgstr "Bod “%s” už bol vyexportovaný"
508
509#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
510#: ../src/commands.c:1089
511#: n:67
512#, c-format
513msgid "Duplicate reading “%s”"
514msgstr "Duplicitná hodnota “%s”"
515
516#: ../src/commands.c:800
517#: n:68
518#, c-format
519msgid "FLAG “%s” unknown"
520msgstr "FLAG “%s” je neznámy"
521
522#: ../src/readval.c:471
523#: n:69
524msgid "Missing \""
525msgstr "Chýba \""
526
527#. TRANSLATORS: Here "station" is a survey station, not a train station.
528#: ../src/listpos.c:121
529#: n:70
530#, c-format
531msgid "Station “%s” referred to just once, with an explicit prefix - typo?"
532msgstr "Bod “%s” použitý iba raz s explicitným prefixom - preklep?"
533
534#. TRANSLATORS: Here "station" is a survey station, not a train station.
535#: ../src/netartic.c:394
536#: n:71
537msgid "The following survey stations are not attached to a fixed point:"
538msgstr "Nasledujúci body nie sú pripojené na fixný bod"
539
540#: ../src/netskel.c:129
541#: n:72
542#, c-format
543msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
544msgstr "Meranie (survey) nemá fixné body. Preto bude fixovaný %s so súradnicami (0,0,0)"
545
546#. TRANSLATORS: fixed survey station that is not part of any survey
547#: ../src/netskel.c:919
548#: n:73
549#, c-format
550msgid "Unused fixed point “%s”"
551msgstr "Nepoužitý fixný bod “%s”"
552
553#: ../src/matrix.c:123
554#: n:74
555msgid "Network solved by reduction - no simultaneous equations to solve."
556msgstr "Sieť vyriešená redukciou - nie je treba riešiť simultánne rovnice"
557
558#: ../src/matrix.c:134
559#: n:75
560#, c-format
561msgid "Solving %d simultaneous equations"
562msgstr "Rieši sa %d simultánnych rovníc"
563
564#: ../src/commands.c:1146
565#: n:77
566#, c-format
567msgid "Reading “%s” duplicates previous reading(s)"
568msgstr "Údaj “%s” duplikuje predchádzajúci údaj/e"
569
570#: ../src/matrix.c:132
571#: n:78
572msgid "Solving one equation"
573msgstr "Rieši sa jedna rovnica"
574
575#: ../src/datain.c:896
576#: ../src/datain.c:1138
577#: ../src/datain.c:1326
578#: n:79
579msgid "Negative adjusted tape reading"
580msgstr "Záporná nastavená vzdialenosť"
581
582#: ../src/commands.c:1604
583#: ../src/commands.c:1624
584#: n:80
585msgid "Date is in the future!"
586msgstr "Dátum je v budúcnosti!"
587
588#: ../src/commands.c:1628
589#: n:81
590msgid "End of date range is before the start"
591msgstr "Posledný dátum je pred prvým"
592
593#: ../src/avenprcore.cc:125
594#: n:82
595#, c-format
596msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
597msgstr "Parameter “%s” v konfiguračnom súbore tlačiarne má nesprávnu hodnotu “%s”"
598
599#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
600#. there is no station "entrance.27" in the centre-line.
601#: ../src/netskel.c:1004
602#: n:83
603#, c-format
604msgid "Cross section specified at non-existent station “%s”"
605msgstr "Priečny rez definovaný na neexistujúcom bode “%s”"
606
607#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
608#. foresight and a clino reading for the backsight, or something similar.
609#: ../src/datain.c:957
610#: ../src/datain.c:978
611#: n:84
612msgid "CLINO and BACKCLINO readings must be of the same type"
613msgstr "Hodnoty CLINO a BACKCLINO musí byť toho istého typu"
614
615#: ../src/avenprcore.cc:120
616#: n:85
617#, c-format
618msgid "Parameter “%s” missing in printer configuration file"
619msgstr "Parameter “%s” v konfiguračnom súbore tlačiarne chýba"
620
621#: ../src/readval.c:522
622#: n:86
623msgid "Invalid month"
624msgstr "Nesprávny mesiac"
625
626#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
627#: ../src/readval.c:530
628#: n:87
629msgid "Invalid day of the month"
630msgstr "Tento deň v tomto mesiaci neexistuje"
631
632#: ../src/cavern.c:237
633#: n:88
634#, c-format
635msgid "3d file format versions %d to %d supported"
636msgstr "Sú podporované 3D formáty súborov %d až %d"
637
638#, c-format
639#~ msgid "Error in format of font file “%s”"
640#~ msgstr "Chyba vo formáte fontu “%s”"
641
642#: ../src/readval.c:200
643#: n:89
644msgid "Expecting survey name"
645msgstr "Predpokladá sa názov survey"
646
647#. TRANSLATORS: Program will exit shortly after printing this
648#: ../src/message.c:224
649#: n:90
650msgid "Abnormal termination"
651msgstr "Abnormálne ukončenie"
652
653#: ../src/message.c:225
654#: n:91
655msgid "Arithmetic error"
656msgstr "Aritmetická chyba"
657
658#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
659#: ../src/message.c:226
660#: n:92
661msgid "Illegal instruction"
662msgstr "Ilegálna inštrukcia"
663
664#: ../src/extend.c:536
665#: ../src/mainfrm.cc:381
666#: ../src/sorterr.c:140
667#: n:93
668#, c-format
669msgid "Couldn’t open file “%s”"
670msgstr "Nie je možné otvoriť súbor “%s”"
671
672#: ../src/printwx.cc:586
673#: n:402
674#, c-format
675msgid "Couldn’t write file “%s”"
676msgstr "Súbor “%s” sa nedá zapísať"
677
678#: ../src/message.c:227
679#: n:94
680msgid "Bad memory access"
681msgstr "Chyba prístupu do pamäte"
682
683#. TRANSLATORS: If you're unsure what "deprecated" means, see:
684#. http://en.wikipedia.org/wiki/Deprecation
685#: ../src/commands.c:446
686#: ../src/commands.c:509
687#: ../src/commands.c:537
688#: ../src/commands.c:1049
689#: ../src/commands.c:1354
690#: ../src/readval.c:96
691#: n:95
692msgid "Further uses of this deprecated feature will not be reported"
693msgstr "Ďalšie použitia zamietnutej fukcie nebudú zaznamenané"
694
695#: ../src/message.c:228
696#: n:97
697msgid "Unknown signal received"
698msgstr "Bol obdržaný neznámy signál"
699
700#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
701#. full circle.
702#: ../src/datain.c:862
703#: n:98
704#, c-format
705msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
706msgstr "Hodnoty COMPASS a BACKCOMPASS sa líši o %s stupňov"
707
708#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
709#. full circle.
710#: ../src/datain.c:1026
711#: n:99
712#, c-format
713msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
714msgstr "Hodnoty CLINO a BACKCLINO sa líši o %s stupňov"
715
716#: ../src/cad3d.c:629
717#: n:100
718msgid "do not generate station markers"
719msgstr "negenerovať symboly bodov"
720
721#: ../src/cad3d.c:630
722#: n:101
723msgid "do not generate station labels"
724msgstr "negenerovať popisky bodov"
725
726#: ../src/cad3d.c:631
727#: n:102
728msgid "do not generate survey legs"
729msgstr "negenerovať zámery"
730
731#: ../src/cad3d.c:635
732#: n:103
733msgid "produce an elevation view"
734msgstr "vytvoriť bočný pohľad"
735
736#: ../src/commands.c:1046
737#: n:104
738#, c-format
739msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
740msgstr "“*data %s %c …” boly zamietnuté - použijte “*data %s …” namiesto toho"
741
742#: ../src/extend.c:490
743#: n:105
744msgid "Reading in data - please wait…"
745msgstr "Načítam údaje - prosím počkajte…"
746
747#. TRANSLATORS: Perhaps the user tried to load a different type of file as a
748#. Survex .3d file, or the .3d file was corrupted.
749#: ../src/3dtopos.c:154
750#: ../src/3dtopos.c:160
751#: ../src/cad3d.c:873
752#: ../src/cad3d.c:884
753#: ../src/img_hosted.c:34
754#: n:106
755#, c-format
756msgid "Bad 3d image file “%s”"
757msgstr "Nesprávny 3D obrazový súbor  “%s”"
758
759#. TRANSLATORS: This is the date format string used to timestamp .3d files
760#. internally.  Probably best to keep it the same for all translations.
761#: ../src/img.c:43
762#: ../src/mainfrm.cc:1343
763#: n:107
764#, c-format
765msgid "%a,%Y.%m.%d %H:%M:%S %Z"
766msgstr "%a,%Y.%m.%d %H:%M:%S %Z"
767
768#. TRANSLATORS: put in .3d file if we can’t read the date/time
769#: ../src/mainfrm.cc:1339
770#: n:108
771msgid "Date and time not available."
772msgstr "Dátum a čas nie sú dostupné"
773
774#: ../src/img_hosted.c:35
775#: n:109
776#, c-format
777msgid "Error reading from file “%s”"
778msgstr "Chyba pri čítaní zo súboru “%s”"
779
780#: ../src/filename.c:79
781#: ../src/img_hosted.c:36
782#: ../src/mainfrm.cc:339
783#: ../src/mainfrm.cc:1824
784#: n:110
785#, c-format
786msgid "Error writing to file “%s”"
787msgstr "Chyba pri zápise do súboru “%s”"
788
789#: ../src/filename.c:82
790#: n:111
791msgid "Error writing to file"
792msgstr "Chyba pri zápise do súboru"
793
794#: ../src/sorterr.c:76
795#: ../src/sorterr.c:93
796#: ../src/sorterr.c:164
797#: n:112
798msgid "Couldn’t parse .err file"
799msgstr "Chyba pri analýze .err súboru"
800
801#: ../src/cavern.c:380
802#: n:113
803#, c-format
804msgid "There were %d warning(s) and %d error(s) - no output files produced."
805msgstr "Vyskytlo sa %d varovaní a %d chýb - nebol vytvorený výstupný súbor."
806
807#: ../src/img_hosted.c:37
808#: n:114
809#, c-format
810msgid "File “%s” has a newer format than this program can understand"
811msgstr "Súbor “%s” má novší formát, než je tento program schopný zpracovať"
812
813#: ../src/printwx.cc:922
814#: n:115
815msgid "North"
816msgstr "Sever"
817
818#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
819#: ../src/printwx.cc:946
820#: n:116
821msgid "Elevation on"
822msgstr "Profil v smere"
823
824#: ../src/printwx.cc:418
825#: n:117
826msgid "P&lan view"
827msgstr "&Pôdorys"
828
829#: ../src/printwx.cc:420
830#: n:285
831msgid "&Elevation"
832msgstr "P&rofil"
833
834#: ../src/gfxcore.cc:692
835#: ../src/mainfrm.cc:127
836#: n:118
837msgid "Elevation"
838msgstr "Profil"
839
840#: ../src/cavern.c:342
841#: n:120
842msgid "Calculating statistics"
843msgstr "Počíta sa štatistika"
844
845#: ../src/readval.c:485
846#: n:121
847msgid "Expecting string field"
848msgstr "Predpokladá sa textové pole"
849
850#: ../src/cmdline.c:208
851#: n:122
852msgid "too few arguments"
853msgstr "Príliš málo argumentov"
854
855#: ../src/cmdline.c:215
856#: n:123
857msgid "too many arguments"
858msgstr "Príliš mnoho argumentov"
859
860#: ../src/cmdline.c:174
861#: ../src/cmdline.c:177
862#: ../src/cmdline.c:181
863#: n:124
864msgid "FILE"
865msgstr "SÚBOR"
866
867#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
868#. "sequence" for the English "traverse", which makes sense (although toporobot
869#. actually uses this term to mean something more specific).  Feel free to
870#. follow this lead if you can't think of a better term - these messages mostly
871#. indicate how processing is progressing.
872#.
873#. A trailing traverse is a dead end back to a junction.
874#: ../src/netskel.c:163
875#: n:125
876msgid "Removing trailing traverses"
877msgstr "Odstránenie slepých odbočiek"
878
879#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
880#. "sequence" for the English "traverse", which makes sense (although toporobot
881#. actually uses this term to mean something more specific).  Feel free to
882#. follow this lead if you can't think of a better term - these messages mostly
883#. indicate how processing is progressing.
884#: ../src/netskel.c:217
885#: n:126
886msgid "Concatenating traverses"
887msgstr "Pripojenie spojok"
888
889#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
890#. "sequence" for the English "traverse", which makes sense (although toporobot
891#. actually uses this term to mean something more specific).  Feel free to
892#. follow this lead if you can't think of a better term - these messages mostly
893#. indicate how processing is progressing.
894#: ../src/netskel.c:410
895#: n:127
896msgid "Calculating traverses"
897msgstr "Výpočet spojok"
898
899#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
900#. "sequence" for the English "traverse", which makes sense (although toporobot
901#. actually uses this term to mean something more specific).  Feel free to
902#. follow this lead if you can't think of a better term - these messages mostly
903#. indicate how processing is progressing.
904#.
905#. A trailing traverse is a dead end back to a junction.
906#: ../src/netskel.c:742
907#: n:128
908msgid "Calculating trailing traverses"
909msgstr "Výpočet koncových spojok"
910
911#: ../src/network.c:82
912#: n:129
913msgid "Simplifying network"
914msgstr "Zjednodušenie siete"
915
916#: ../src/network.c:540
917#: n:130
918msgid "Calculating network"
919msgstr "Výpočet siete"
920
921#: ../src/datain.c:1435
922#: n:131
923#, c-format
924msgid "Found “%s”, expecting “F” or “B”"
925msgstr "Nájdené “%s”, očakávané “F” alebo “B”"
926
927#: ../src/cavern.c:438
928#: n:132
929#, c-format
930msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
931msgstr "Celková dļžka zámer = %7.2fm (%7.2fm nastavené)"
932
933#: ../src/cavern.c:441
934#: n:133
935#, c-format
936msgid "Total plan length of survey legs = %7.2fm"
937msgstr "Celková pôdorysná dļžka zámer %7.2fm"
938
939#: ../src/cavern.c:444
940#: n:134
941#, c-format
942msgid "Total vertical length of survey legs = %7.2fm"
943msgstr "Celková vertikálna dļžka zámer %7.2fm"
944
945#. TRANSLATORS: numbers are altitudes of highest and lowest stations
946#: ../src/cavern.c:450
947#: n:135
948#, c-format
949msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
950msgstr "Vertikálny rozsah = %4.2fm (od %s v %4.2fm do %s v %4.2fm)"
951
952#. TRANSLATORS: c.f. previous message
953#: ../src/cavern.c:451
954#: n:136
955#, c-format
956msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
957msgstr "Rozsah sever-juh = %4.2fm (od %s od %4.2fm do %s do %4.2fm)"
958
959#. TRANSLATORS: c.f. previous two messages
960#: ../src/cavern.c:452
961#: n:137
962#, c-format
963msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
964msgstr "Rozsah východ-západ = %4.2fm (od %s od %4.2fm do %s do %4.2fm)"
965
966#: ../src/cavern.c:426
967#: n:138
968msgid "There is 1 loop."
969msgstr "Jeden uzavretý polygón."
970
971#: ../src/cavern.c:428
972#: n:139
973#, c-format
974msgid "There are %ld loops."
975msgstr "%ld uzavretých polygónov."
976
977#: ../src/cavern.c:364
978#: n:140
979#, c-format
980msgid "CPU time used %5.2fs"
981msgstr "Využitý čas CPU %5.2fs"
982
983#: ../src/cavern.c:367
984#: n:141
985#, c-format
986msgid "Time used %5.2fs"
987msgstr "Celkový čas %5.2fs"
988
989#: ../src/cavern.c:369
990#: n:142
991msgid "Time used unavailable"
992msgstr "Celkový čas - nedostupný"
993
994#: ../src/cavern.c:372
995#: n:143
996#, c-format
997msgid "Time used %5.2fs (%5.2fs CPU time)"
998msgstr "Celkový čas %5.2fs (%5.2fs času CPU)"
999
1000#: ../src/cavern.c:376
1001#: n:144
1002msgid "Done."
1003msgstr "Hotovo."
1004
1005#: ../src/netskel.c:720
1006#: n:145
1007#, c-format
1008msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1009msgstr "Pôvodná dļžka %6.2fm (%3d zámer), redukovaná %6.2fm (%5.2fm/zámeru). "
1010
1011#: ../src/netskel.c:723
1012#: n:146
1013#, c-format
1014msgid "Error %6.2f%%"
1015msgstr "Chyba %6.2f%%"
1016
1017#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
1018#. error per metre is meaningless
1019#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
1020#. the numbers in the message above.
1021#: ../src/netskel.c:725
1022#: n:147
1023msgid "Error    N/A"
1024msgstr "Chyba (nemá zmysel)"
1025
1026#: ../src/cad3d.c:632
1027#: n:148
1028#, c-format
1029msgid "generate grid (default %sm)"
1030msgstr "generovať sieť (defaultne %sm)"
1031
1032#: ../src/cad3d.c:633
1033#: n:149
1034#, c-format
1035msgid "station labels text height (default %s)"
1036msgstr "veľkosť textu pre popisky bodov (defaultne %sm)"
1037
1038#: ../src/cad3d.c:634
1039#: n:152
1040#, c-format
1041msgid "station marker size (default %s)"
1042msgstr "veľkosť symbolu bodu (defaultne %sm)"
1043
1044#: ../src/cad3d.c:636
1045#: n:155
1046#, c-format
1047msgid "factor to scale down by (default %s)"
1048msgstr "koeficient pre zmenšenie o (defaultne %sm)"
1049
1050#: ../src/cad3d.c:637
1051#: n:156
1052msgid "produce DXF output"
1053msgstr "vygenerovať formát DXF"
1054
1055#: ../src/cad3d.c:638
1056#: n:158
1057msgid "produce Skencil output"
1058msgstr "vygenerovať formát Skencil"
1059
1060#: ../src/cad3d.c:639
1061#: n:159
1062msgid "produce Compass PLT output for Carto"
1063msgstr "vygenerovať formát Compass PLT pre Carto"
1064
1065#: ../src/cad3d.c:640
1066#: n:160
1067msgid "produce SVG output"
1068msgstr "vygenerovať formát SVG"
1069
1070#. TRANSLATORS: description of --help option
1071#: ../src/cmdline.c:137
1072#: n:150
1073msgid "display this help and exit"
1074msgstr "zobraziť túto nápovedu a skončiť"
1075
1076#. TRANSLATORS: description of --verbose option
1077#: ../src/cmdline.c:139
1078#: n:151
1079msgid "output version information and exit"
1080msgstr "zobraziť informáciu o verzii a skončiť"
1081
1082#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1083#: ../src/cmdline.c:166
1084#: n:153
1085msgid "OPTION"
1086msgstr "OPTION"
1087
1088#: ../src/mainfrm.cc:131
1089#: ../src/printwx.cc:370
1090#: ../src/printwx.cc:983
1091#: ../src/printwx.cc:1037
1092#: n:154
1093msgid "Scale"
1094msgstr "Merítko"
1095
1096#: ../src/cmdline.c:190
1097#: n:157
1098#, c-format
1099msgid "Try “%s --help” for more information.\n"
1100msgstr "Viac informácií získate príkazom “%s --help”.\n"
1101
1102#: ../src/avenprcore.cc:269
1103#: n:166
1104#, c-format
1105msgid "Page %d of %d"
1106msgstr "Stránka  %d z %d"
1107
1108#: ../src/avenprcore.cc:272
1109#: ../src/printwx.cc:1462
1110#: n:167
1111#, c-format
1112msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1113msgstr "Meranie (survey) “%s”   Stránka %d (z %d)   Zpracované od stránky %s"
1114
1115#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1116#. something like "123°".  The bearing is up the page.
1117#: ../src/printwx.cc:928
1118#: n:168
1119#, c-format
1120msgid "Plan view, %s up page"
1121msgstr "Mapa, %s v hlavičke"
1122
1123#. TRANSLATORS: This is used on printouts of elevations, with %s replaced by
1124#. something like "123°".  The bearing is the direction we’re looking.
1125#: ../src/printwx.cc:962
1126#: n:169
1127#, c-format
1128msgid "Elevation facing %s"
1129msgstr "Bočný pohľad v smere %s"
1130
1131#. TRANSLATORS: This is used on printouts of tilted elevations, with the first
1132#. %s replaced by something like "123°", and the second by something like "-45°".
1133#. The bearing is the direction we’re looking.
1134#: ../src/printwx.cc:967
1135#: n:284
1136#, c-format
1137msgid "Elevation facing %s, tilted %s"
1138msgstr "Bočný pohľad v smere %s, pootočený o %s"
1139
1140#. TRANSLATORS: This is used on printouts of extended elevations.
1141#: ../src/printwx.cc:975
1142#: n:191
1143msgid "Extended elevation"
1144msgstr "Rozvinutý rez"
1145
1146#: ../src/cavern.c:412
1147#: n:172
1148msgid "Survey contains 1 survey station,"
1149msgstr "Meranie (survey) obsahuje jediný bod,"
1150
1151#: ../src/cavern.c:414
1152#: n:173
1153#, c-format
1154msgid "Survey contains %ld survey stations,"
1155msgstr "Meranie (survey) obsahuje %ld bodov,"
1156
1157#: ../src/cavern.c:418
1158#: n:174
1159msgid " joined by 1 leg."
1160msgstr " spojených 1 zámerou."
1161
1162#: ../src/cavern.c:420
1163#: n:175
1164#, c-format
1165msgid " joined by %ld legs."
1166msgstr " spojených %ld zámerami."
1167
1168#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1169#: ../src/listpos.c:182
1170#: n:176
1171msgid "node"
1172msgstr "uzol"
1173
1174#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1175#: ../src/listpos.c:182
1176#: n:177
1177msgid "nodes"
1178msgstr "uzly"
1179
1180#. TRANSLATORS: connected component in the graph theory sense
1181#. It means there are %ld bits of survey with no connections between them
1182#. This message is only used if there are more than 1
1183#: ../src/cavern.c:434
1184#: n:178
1185#, c-format
1186msgid "Survey has %ld connected components."
1187msgstr "Meranie (survey) má %ld spojených častí."
1188
1189#. TRANSLATORS: Label for button in aven’s cavern log window which causes the
1190#. survey data to be reprocessed.
1191#: ../src/cavernlog.cc:397
1192#: ../src/cavernlog.cc:408
1193#: n:184
1194msgid "Reprocess"
1195msgstr "Spracuj dáta znova"
1196
1197#: ../src/cmdline.c:238
1198#: ../src/cmdline.c:257
1199#: n:185
1200#, c-format
1201msgid "numeric argument “%s” out of range"
1202msgstr "číselný argument “%s” mimo rozsah"
1203
1204#: ../src/cmdline.c:240
1205#: n:186
1206#, c-format
1207msgid "argument “%s” not an integer"
1208msgstr "argument “%s” nie je integer"
1209
1210#: ../src/cmdline.c:259
1211#: n:187
1212#, c-format
1213msgid "argument “%s” not a number"
1214msgstr "argument “%s” nie je číslo"
1215
1216#: ../src/commands.c:815
1217#: n:188
1218msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1219msgstr "predpokladá sa “DUPLICATE”, “SPLAY”, alebo “SURFACE”"
1220
1221#: ../src/commands.c:818
1222#: n:189
1223msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1224msgstr "Predpokladá sa “NOT”, “DUPLICATE”, “SPLAY”, alebo “SURFACE”"
1225
1226#: ../src/listpos.c:82
1227#: n:190
1228#, c-format
1229msgid "Station “%s” referred to by *entrance or *export but never used"
1230msgstr "Bod “%s” sa uvádza ako *entrance alebo *export ale nebol použitý"
1231
1232#: ../src/commands.c:617
1233#: n:192
1234msgid "No matching BEGIN"
1235msgstr "Chýba odpovedajúce BEGIN"
1236
1237#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it’s
1238#. given at all
1239#: ../src/commands.c:639
1240#: n:193
1241msgid "Prefix tag doesn’t match BEGIN"
1242msgstr "Prefix tag neodpovedá BEGIN"
1243
1244#: ../src/commands.c:643
1245#: n:194
1246msgid "Closing prefix omitted from END"
1247msgstr "Koncový prefix chýba v END"
1248
1249#. TRANSLATORS: heading line for .pos file
1250#. please try to ensure the “,”s (or at least the columns) are in the same place
1251#: ../src/3dtopos.c:109
1252#: n:195
1253msgid "( Easting, Northing, Altitude )"
1254msgstr "( východ,  sever,    výška    )"
1255
1256#. TRANSLATORS: bpp is "Bits Per Pixel"
1257#: ../src/aboutdlg.cc:172
1258#: n:196
1259#, c-format
1260msgid "Display Depth: %d bpp"
1261msgstr "Rozsah zobrazenia %d v bitoch na pixel)"
1262
1263#. TRANSLATORS: appended to previous message if the display is colour
1264#: ../src/aboutdlg.cc:173
1265#: n:197
1266msgid " (colour)"
1267msgstr " (pre farbu)"
1268
1269#: ../src/readval.c:510
1270#: ../src/readval.c:520
1271#: ../src/readval.c:528
1272#: n:198
1273#, c-format
1274msgid "Expecting date, found “%s”"
1275msgstr "Predpokladá sa čas, najdené “%s”"
1276
1277#. TRANSLATORS: --help output for --survey option
1278#. "this" has been added to English translation
1279#: ../src/3dtopos.c:50
1280#: ../src/aven.cc:63
1281#: ../src/cad3d.c:628
1282#: ../src/diffpos.c:57
1283#: ../src/dump3d.c:49
1284#: ../src/extend.c:443
1285#: n:199
1286msgid "only load the sub-survey with this prefix"
1287msgstr "s prefixom sa natiahla iba časť merania"
1288
1289#. TRANSLATORS: --help output for aven --print option
1290#: ../src/aven.cc:64
1291#: n:119
1292msgid "print and exit (requires a 3d file)"
1293msgstr "vytlač a ukonči (vyžaduje 3D súbor)"
1294
1295#. TRANSLATORS: --help output for cavern --percentage option
1296#: ../src/cavern.c:122
1297#: n:161
1298msgid "display percentage progress"
1299msgstr "zobraz postup v percento"
1300
1301#. TRANSLATORS: --help output for cavern --output option
1302#: ../src/cavern.c:123
1303#: n:162
1304msgid "set location for output files"
1305msgstr "urči miesto pre uloženie výstupných súborov"
1306
1307#. TRANSLATORS: --help output for cavern --quiet option
1308#: ../src/cavern.c:124
1309#: n:163
1310msgid "only show brief summary (-qq for errors only)"
1311msgstr "zobraz iba krátku správu (-qq iba pre chyby)"
1312
1313#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1314#: ../src/cavern.c:125
1315#: n:164
1316msgid "do not create .err file"
1317msgstr "nedá sa vytvoriť súbor s chybami"
1318
1319#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1320#: ../src/cavern.c:126
1321#: n:165
1322msgid "turn warnings into errors"
1323msgstr "zmena varovania na chyby"
1324
1325#. TRANSLATORS: --help output for cavern --log option
1326#: ../src/cavern.c:127
1327#: n:170
1328msgid "log output to .log file"
1329msgstr "zápis výstupu do súboru .log"
1330
1331#. TRANSLATORS: --help output for cavern --3d-version option
1332#: ../src/cavern.c:128
1333#: n:171
1334msgid "specify the 3d file format version to output"
1335msgstr "ktorú verziu 3d súboru použiť pre výstup"
1336
1337#. TRANSLATORS: --help output for sorterr --horizontal option
1338#: ../src/sorterr.c:52
1339#: n:179
1340msgid "sort by horizontal error factor"
1341msgstr "triedenie podľa horizontálnej chyby"
1342
1343#. TRANSLATORS: --help output for sorterr --vertical option
1344#: ../src/sorterr.c:53
1345#: n:180
1346msgid "sort by vertical error factor"
1347msgstr "triedenie podľa vertikálnej chyby"
1348
1349#. TRANSLATORS: --help output for sorterr --percentage option
1350#: ../src/sorterr.c:54
1351#: n:181
1352msgid "sort by percentage error"
1353msgstr "triedenie podľa perceptuálnej chyby"
1354
1355#. TRANSLATORS: --help output for sorterr --per-leg option
1356#: ../src/sorterr.c:55
1357#: n:182
1358msgid "sort by error per leg"
1359msgstr "triedenie podľa chyby ne zámeru"
1360
1361#. TRANSLATORS: --help output for sorterr --replace option
1362#: ../src/sorterr.c:56
1363#: n:183
1364msgid "replace .err file with resorted version"
1365msgstr "prepísať súbor .err novým triedením"
1366
1367#. TRANSLATORS: --help output for dump3d --rewind option
1368#: ../src/dump3d.c:50
1369#: n:204
1370msgid "rewind file and read it a second time"
1371msgstr "znova načítať súbor od začiatku"
1372
1373#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s meaningless to say
1374#. your tape is marked in "0 feet" (but you might measure distance by counting
1375#. knots on a diving line, and tie them every "2 feet").
1376#: ../src/commands.c:1280
1377#: n:200
1378msgid "*UNITS factor must be non-zero"
1379msgstr "*UNITS faktor musí byť nenulový"
1380
1381#. TRANSLATORS: In the "File" menu
1382#: ../src/mainfrm.cc:745
1383#: n:201
1384msgid "&Screenshot…"
1385msgstr "Otlačok o&brazovky…"
1386
1387#: ../src/mainfrm.cc:1353
1388#: n:202
1389#, c-format
1390msgid "No survey data in 3d file “%s”"
1391msgstr "V 3d súbore “%s” nie sú údaje"
1392
1393#: ../src/gfxcore.cc:650
1394#: n:203
1395msgid "Facing"
1396msgstr "Smer"
1397
1398#. TRANSLATORS: for the title of the About box
1399#: ../src/aboutdlg.cc:69
1400#: n:205
1401#, c-format
1402msgid "About %s"
1403msgstr "O %s"
1404
1405#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1406#. it should be translated to the terminology that cavers using the language
1407#. would use.
1408#.
1409#. File->Open dialog:
1410#: ../src/mainfrm.cc:1797
1411#: n:206
1412msgid "Select a survey file to view"
1413msgstr "Vyber súbor s meraním (survey)"
1414
1415#: ../src/mainfrm.cc:1789
1416#: n:207
1417msgid "Survex 3d files"
1418msgstr "3D súbory Survex"
1419
1420#: ../src/mainfrm.cc:1794
1421#: ../src/mainfrm.cc:2189
1422#: ../src/printwx.cc:562
1423#: n:208
1424msgid "All files"
1425msgstr "Všetky súbory"
1426
1427#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1428#. it should be translated to the terminology that cavers using the language
1429#. would use.
1430#: ../src/mainfrm.cc:1788
1431#: n:229
1432msgid "All survey files"
1433msgstr "Všetky súbory s meraním"
1434
1435#: ../src/mainfrm.cc:1790
1436#: n:329
1437msgid "Survex svx files"
1438msgstr "Súbory svx Survexu"
1439
1440#: ../src/mainfrm.cc:1792
1441#: n:330
1442msgid "Compass DAT and MAK files"
1443msgstr "Súbory DAT a MAK pre Compass"
1444
1445#: ../src/printwx.cc:268
1446#: n:411
1447msgid "DXF files"
1448msgstr "Súbory DXF"
1449
1450#: ../src/printwx.cc:269
1451#: n:412
1452msgid "EPS files"
1453msgstr "Súbory EPS"
1454
1455#: ../src/printwx.cc:270
1456#: n:413
1457msgid "GPX files"
1458msgstr "Súbory GPX"
1459
1460#: ../src/printwx.cc:271
1461#: n:414
1462msgid "HPGL for plotters"
1463msgstr "Súbory HPGL pre plotry"
1464
1465#: ../src/printwx.cc:272
1466#: n:415
1467msgid "Compass PLT for use with Carto"
1468msgstr "Súbory Compass PLT pre použitie v prog. Carto"
1469
1470#: ../src/printwx.cc:273
1471#: n:416
1472msgid "Skencil files"
1473msgstr "Súbory Skencil"
1474
1475#: ../src/printwx.cc:274
1476#: n:417
1477msgid "SVG files"
1478msgstr "Súbory SVG"
1479
1480#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1481#. it should be translated to the terminology that cavers using the language
1482#. would use.
1483#.
1484#. This string is used in the about box (summarising the purpose of aven).
1485#: ../src/aboutdlg.cc:87
1486#: n:209
1487msgid "Survey visualisation tool"
1488msgstr "Vizualizácia polygónu"
1489
1490#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any accelerator key.
1491#. The accelerators must be different within this group
1492#: ../src/mainfrm.cc:871
1493#: n:210
1494msgid "&File"
1495msgstr "&Súbor"
1496
1497#: ../src/mainfrm.cc:872
1498#: n:211
1499msgid "&Rotation"
1500msgstr "&Rotácia"
1501
1502#: ../src/mainfrm.cc:873
1503#: n:212
1504msgid "&Orientation"
1505msgstr "&Orientácia"
1506
1507#: ../src/mainfrm.cc:874
1508#: n:213
1509msgid "&View"
1510msgstr "&Pohľad"
1511
1512#: ../src/mainfrm.cc:876
1513#: n:214
1514msgid "&Controls"
1515msgstr "O&vládanie"
1516
1517#: ../src/mainfrm.cc:885
1518#: n:215
1519msgid "&Help"
1520msgstr "&Help"
1521
1522#: ../src/mainfrm.cc:878
1523#: n:216
1524msgid "&Presentation"
1525msgstr "Pre&zentácia"
1526
1527#: ../src/aboutdlg.cc:98
1528#: n:219
1529msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1530msgstr "Tento program je volný software; můžete jej šířit a modifikovat podle ustanovení Obecné veřejné licence GNU, vydávané Free Software Foundation; a to buď verze 2 této licence anebo (podle vašeho uvážení) kterékoli pozdější verze."
1531
1532#. TRANSLATORS: Part of 3dtopos --help
1533#: ../src/3dtopos.c:85
1534#: n:217
1535msgid "3D_FILE [POS_FILE]"
1536msgstr "3D_FILE [POS_FILE]"
1537
1538#. TRANSLATORS: Part of diffpos --help
1539#: ../src/diffpos.c:261
1540#: n:218
1541msgid "FILE1 FILE2 [THRESHOLD]"
1542msgstr "FILE1 FILE2 [THRESHOLD]"
1543
1544#. TRANSLATORS: Part of diffpos --help
1545#: ../src/diffpos.c:262
1546#: n:255
1547#, c-format
1548msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1549msgstr "FILE1 a FILE2 môžu byť súbory .pos alebo .3d\nTHRESHOLD je max. ignorovateľná zmena pozdĺž ktorejkoľvek osi v metroch (defaultne %s)"
1550
1551#. TRANSLATORS: Part of extend --help
1552#: ../src/extend.c:464
1553#: n:267
1554msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1555msgstr "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1556
1557#. TRANSLATORS: Part of sorterr --help
1558#: ../src/sorterr.c:121
1559#: n:268
1560msgid "ERR_FILE [HOW_MANY]"
1561msgstr "ERR_FILE [HOW_MANY]"
1562
1563#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1564#. it should be translated to the terminology that cavers using the language
1565#. would use.
1566#.
1567#. Part of aven --help
1568#: ../src/aven.cc:106
1569#: ../src/aven.cc:130
1570#: n:269
1571msgid "[SURVEY_FILE]"
1572msgstr "[SURVEY_FILE]"
1573
1574#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any accelerator key.
1575#. The string "\t" separates the menu text and any accelerator key.
1576#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
1577#. c.f. 201, 380, 381.
1578#: ../src/mainfrm.cc:739
1579#: n:220
1580msgid "&Open…\tCtrl+O"
1581msgstr "&Otvoriť…\tCtrl+O"
1582
1583#. TRANSLATORS: Used in the "colour key" for "colour by date" if there are
1584#. surveys without date information.
1585#: ../src/gfxcore.cc:931
1586#: n:221
1587msgid "Undated"
1588msgstr "Bez dátumu"
1589
1590#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1591#. which aren’t part of a loop and so have no error information.
1592#: ../src/gfxcore.cc:953
1593#: n:290
1594msgid "Not in loop"
1595msgstr "Nie je súčasťou uzavretého ťahu"
1596
1597#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
1598#: ../src/commands.c:1134
1599#: n:222
1600msgid "NEWLINE can’t be the first reading"
1601msgstr "NEWLINE nemôže byť prvý údaj"
1602
1603#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
1604#: ../src/commands.c:1169
1605#: n:223
1606msgid "NEWLINE can’t be the last reading"
1607msgstr "NEWLINE nemôže byť posledný údaj"
1608
1609#. TRANSLATORS: error from "*data normal station tape compass clino"
1610#: ../src/commands.c:1191
1611#: n:224
1612msgid "Interleaved readings, but no NEWLINE"
1613msgstr "Vložené údaje, ale nie NEWLINE"
1614
1615#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
1616#: ../src/commands.c:1078
1617#: n:225
1618#, c-format
1619msgid "Reading “%s” must occur before NEWLINE"
1620msgstr "Údaj “%s” musí predchádzať NEWLINE"
1621
1622#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
1623#: ../src/commands.c:1127
1624#: n:226
1625msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1626msgstr "NEWLINE môže byť zpracované iba pri STATION, DEPTH, a COUNT"
1627
1628#: ../src/commands.c:1314
1629#: n:227
1630msgid "Can’t calibrate angular and length quantities together"
1631msgstr "Nie je možné nakalibrovať uhlovýé a dļžkové údaje naraz"
1632
1633#: ../src/commands.c:564
1634#: n:397
1635msgid "Bad *alias command"
1636msgstr ""
1637
1638#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
1639#. height values).
1640#~ msgid "Select a terrain file to view"
1641#~ msgstr "Vyber súbor s povrchom k zobrazeniu"
1642
1643#~ msgid "Terrain files"
1644#~ msgstr "Súbory s povrchom"
1645
1646#. TRANSLATORS: %s will be replaced by the application name ("Aven" currently)
1647#: ../src/log.cc:30
1648#: n:228
1649#, c-format
1650msgid "%s Error Log"
1651msgstr "%s záznam chýb"
1652
1653#. TRANSLATORS: Used in the "Export" settings dialog
1654#: ../src/printwx.cc:520
1655#: n:230
1656msgid "&Export…"
1657msgstr "&Export…"
1658
1659#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
1660#. Tickable menu item which toggles auto rotation
1661#: ../src/mainfrm.cc:758
1662#: n:231
1663msgid "Au&to-Rotate\tSpace"
1664msgstr "&Autorotácia\tSpace"
1665
1666#: ../src/mainfrm.cc:760
1667#: n:232
1668msgid "Speed &Up"
1669msgstr "Z&rýchliť rotáciu"
1670
1671#: ../src/mainfrm.cc:761
1672#: n:233
1673msgid "Slow &Down"
1674msgstr "&Spomaliť rotáciu"
1675
1676#: ../src/mainfrm.cc:763
1677#: n:234
1678msgid "&Reverse Direction"
1679msgstr "&Otočiť rotáciu"
1680
1681#: ../src/mainfrm.cc:765
1682#: n:235
1683msgid "Step Once &Anticlockwise"
1684msgstr "Jeden krok proti s&meru otáčania hodín"
1685
1686#: ../src/mainfrm.cc:766
1687#: n:236
1688msgid "Step Once &Clockwise"
1689msgstr "Jeden krok po smere otáča&nia hodín"
1690
1691#. TRANSLATORS: View *looking* North
1692#: ../src/gfxcore.cc:3005
1693#: ../src/mainfrm.cc:769
1694#: n:240
1695msgid "View &North"
1696msgstr "Pohľad na &sever"
1697
1698#. TRANSLATORS: View *looking* East
1699#: ../src/gfxcore.cc:3006
1700#: ../src/mainfrm.cc:770
1701#: n:241
1702msgid "View &East"
1703msgstr "Pohľad na &východ"
1704
1705#. TRANSLATORS: View *looking* South
1706#: ../src/gfxcore.cc:3007
1707#: ../src/mainfrm.cc:771
1708#: n:242
1709msgid "View &South"
1710msgstr "Pohľad na &juh"
1711
1712#. TRANSLATORS: View *looking* West
1713#: ../src/gfxcore.cc:3008
1714#: ../src/mainfrm.cc:772
1715#: n:243
1716msgid "View &West"
1717msgstr "Pohľad na &západ"
1718
1719#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1720#. it should be translated to the terminology that cavers using the language
1721#. would use.
1722#: ../src/mainfrm.cc:774
1723#: n:244
1724msgid "Shift Survey &Left"
1725msgstr "Posunúť do&lava"
1726
1727#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1728#. it should be translated to the terminology that cavers using the language
1729#. would use.
1730#: ../src/mainfrm.cc:775
1731#: n:245
1732msgid "Shift Survey &Right"
1733msgstr "Posunúť dop&rava"
1734
1735#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1736#. it should be translated to the terminology that cavers using the language
1737#. would use.
1738#: ../src/mainfrm.cc:776
1739#: n:246
1740msgid "Shift Survey &Up"
1741msgstr "Posunúť do&hora"
1742
1743#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1744#. it should be translated to the terminology that cavers using the language
1745#. would use.
1746#: ../src/mainfrm.cc:777
1747#: n:247
1748msgid "Shift Survey &Down"
1749msgstr "Posunúť &dolu"
1750
1751#: ../src/gfxcore.cc:3020
1752#: ../src/mainfrm.cc:779
1753#: n:248
1754msgid "&Plan View"
1755msgstr "&Pôdorys"
1756
1757#: ../src/gfxcore.cc:3021
1758#: ../src/mainfrm.cc:780
1759#: n:249
1760msgid "Ele&vation"
1761msgstr "R&ez"
1762
1763#: ../src/mainfrm.cc:782
1764#: n:250
1765msgid "&Higher Viewpoint"
1766msgstr "Zväčšiť &náklon"
1767
1768#: ../src/mainfrm.cc:783
1769#: n:251
1770msgid "L&ower Viewpoint"
1771msgstr "Z&menšiť náklon"
1772
1773#: ../src/mainfrm.cc:786
1774#: n:252
1775msgid "&Zoom In\t]"
1776msgstr "Zväčš&iť\t]"
1777
1778#: ../src/mainfrm.cc:787
1779#: n:253
1780msgid "Zoo&m Out\t["
1781msgstr "Zmenši&t\t["
1782
1783#: ../src/mainfrm.cc:789
1784#: n:254
1785msgid "Restore De&fault View"
1786msgstr "&Obnovenie východzieho pohľadu"
1787
1788#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing" and
1789#. "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in the
1790#. "what to print" dialog.
1791#: ../src/printwx.cc:336
1792#: n:283
1793msgid "View"
1794msgstr "Pohľad na"
1795
1796#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
1797#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn’t a
1798#. good name for this but nothing better has yet come to mind!
1799#: ../src/printwx.cc:337
1800#: n:256
1801msgid "Elements"
1802msgstr "Objekty"
1803
1804#: ../src/printwx.cc:391
1805#: ../src/printwx.cc:726
1806#: n:257
1807#, c-format
1808msgid "%d pages (%dx%d)"
1809msgstr "%d stránok (%dx%d)"
1810
1811#. TRANSLATORS: used in the scale drop down selector in the print dialog
1812#. the implicit meaning is "choose a suitable scale to fit the
1813#. plot on a single page", but we need something shorter
1814#: ../src/printwx.cc:373
1815#: ../src/printwx.cc:745
1816#: n:258
1817msgid "One page"
1818msgstr "Jednu stránku"
1819
1820#: ../src/mainfrm.cc:123
1821#: ../src/printwx.cc:404
1822#: n:259
1823msgid "Bearing"
1824msgstr "Azimut"
1825
1826#: ../src/printwx.cc:438
1827#: n:260
1828msgid "Station Names"
1829msgstr "Mená bodov"
1830
1831#: ../src/printwx.cc:434
1832#: n:261
1833msgid "Crosses"
1834msgstr "Krížiky"
1835
1836#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1837#. "survey stations".
1838#: ../src/printwx.cc:426
1839#: n:262
1840msgid "Underground Survey Legs"
1841msgstr "Zámery pod povrchom"
1842
1843#: ../src/printwx.cc:454
1844#: n:393
1845msgid "Cross-sections"
1846msgstr ""
1847
1848#: ../src/printwx.cc:459
1849#: n:394
1850msgid "Walls"
1851msgstr "Steny"
1852
1853#: ../src/printwx.cc:463
1854#: n:395
1855msgid "Passages"
1856msgstr "Chodby"
1857
1858#: ../src/printwx.cc:467
1859#: n:421
1860msgid "Origin in centre"
1861msgstr ""
1862
1863#: ../src/printwx.cc:471
1864#: n:422
1865msgid "Full coordinates"
1866msgstr ""
1867
1868#. TRANSLATORS: Used in the print dialog:
1869#: ../src/printwx.cc:409
1870#: n:263
1871msgid "Tilt angle"
1872msgstr "Náklon"
1873
1874#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
1875#: ../src/printwx.cc:477
1876#: n:264
1877msgid "Page Borders"
1878msgstr "Rámček"
1879
1880#. TRANSLATORS: As in the legend on a map.  Used in the print dialog - controls
1881#. drawing the box at the lower left with survey name, view angles, etc
1882#: ../src/printwx.cc:483
1883#: n:265
1884msgid "Legend"
1885msgstr "Popiska"
1886
1887#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
1888#. (otherwise they’ll be skipped to save paper)
1889#: ../src/printwx.cc:481
1890#: n:266
1891msgid "Blank Pages"
1892msgstr "Prázdne stránky"
1893
1894#. TRANSLATORS: Items in the "View" menu:
1895#: ../src/mainfrm.cc:803
1896#: n:270
1897msgid "Station &Names\tCtrl+N"
1898msgstr "&Mená bodov\tCtrl+N"
1899
1900#. TRANSLATORS: Toggles drawing of 3D passages
1901#: ../src/mainfrm.cc:804
1902#: n:346
1903msgid "Passage &Tubes\tCtrl+T"
1904msgstr "Chodby &rúrovité\tCtrl+T"
1905
1906#: ../src/mainfrm.cc:805
1907#: n:271
1908msgid "&Crosses\tCtrl+X"
1909msgstr "&Krížiky\tCtrl+X"
1910
1911#: ../src/mainfrm.cc:806
1912#: n:297
1913msgid "&Grid\tCtrl+G"
1914msgstr "&Sieť\tCtrl+G"
1915
1916#: ../src/mainfrm.cc:807
1917#: n:318
1918msgid "&Bounding Box\tCtrl+B"
1919msgstr "&Ohraničenie\tCtrl+B"
1920
1921#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1922#. "survey stations".
1923#: ../src/mainfrm.cc:809
1924#: n:272
1925msgid "&Underground Survey Legs\tCtrl+L"
1926msgstr "Zámery &pod povrchom\tCtrl+L"
1927
1928#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1929#. "survey stations".
1930#: ../src/mainfrm.cc:810
1931#: n:291
1932msgid "&Surface Survey Legs\tCtrl+F"
1933msgstr "Zámery &na povrchu\tCtrl+F"
1934
1935#: ../src/mainfrm.cc:819
1936#: n:273
1937msgid "&Overlapping Names"
1938msgstr "Pr&ekrývajúce sa mená"
1939
1940#: ../src/gfxcore.cc:3043
1941#: ../src/mainfrm.cc:820
1942#: n:292
1943msgid "Colour by &Depth"
1944msgstr "Farba podľa &hļbky"
1945
1946#: ../src/gfxcore.cc:3044
1947#: ../src/mainfrm.cc:821
1948#: n:293
1949msgid "Colour by D&ate"
1950msgstr "Farna podľa &dátumu"
1951
1952#: ../src/gfxcore.cc:3045
1953#: ../src/mainfrm.cc:822
1954#: n:289
1955msgid "Colour by E&rror"
1956msgstr "Colour &by Error"
1957
1958#: ../src/mainfrm.cc:824
1959#: n:294
1960msgid "Highlight &Entrances"
1961msgstr "Zvýrazniť &vchody"
1962
1963#: ../src/mainfrm.cc:825
1964#: n:295
1965msgid "Highlight &Fixed Points"
1966msgstr "Zvýrazniť &fixné body"
1967
1968#: ../src/mainfrm.cc:826
1969#: n:296
1970msgid "Highlight E&xported Points"
1971msgstr "Zvýrazniť e&xportované body"
1972
1973#: ../src/printwx.cc:442
1974#: n:418
1975msgid "Entrances"
1976msgstr "Vchody"
1977
1978#: ../src/printwx.cc:446
1979#: n:419
1980msgid "Fixed Points"
1981msgstr "Fixné body"
1982
1983#: ../src/printwx.cc:450
1984#: n:420
1985msgid "Exported Stations"
1986msgstr "Exportované body"
1987
1988#: ../src/mainfrm.cc:831
1989#: n:237
1990msgid "&Perspective"
1991msgstr "Perspektív&a"
1992
1993#: ../src/mainfrm.cc:833
1994#: n:238
1995msgid "Textured &Walls"
1996msgstr "&Texturované steny"
1997
1998#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
1999#. instead if it gives a better translation which most users will understand.
2000#: ../src/mainfrm.cc:834
2001#: n:239
2002msgid "Fade Distant Ob&jects"
2003msgstr "Hm&listý opar"
2004
2005#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2006#. "survey stations".
2007#: ../src/mainfrm.cc:835
2008#: n:298
2009msgid "Smoot&hed Survey Legs"
2010msgstr "V&yrovnané zámery"
2011
2012#: ../src/mainfrm.cc:841
2013#: ../src/mainfrm.cc:845
2014#: n:356
2015msgid "Full Screen &Mode\tF11"
2016msgstr "&Celoobrazovkový režim\tF11"
2017
2018#: ../src/mainfrm.cc:859
2019#: n:274
2020msgid "&Compass"
2021msgstr "&Kompas"
2022
2023#: ../src/mainfrm.cc:860
2024#: n:275
2025msgid "C&linometer"
2026msgstr "&Sklonomer"
2027
2028#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2029#. corresponds to which depth, date, survey closure error, etc.
2030#: ../src/mainfrm.cc:861
2031#: n:276
2032msgid "Colour &Key"
2033msgstr "Priradenie &Farieb"
2034
2035#: ../src/mainfrm.cc:862
2036#: n:277
2037msgid "&Scale Bar"
2038msgstr "&Merítko"
2039
2040#: ../src/mainfrm.cc:854
2041#: n:280
2042msgid "&Reverse Sense\tCtrl+R"
2043msgstr "Obrátený sme&r\tCtrl+R"
2044
2045#: ../src/mainfrm.cc:829
2046#: ../src/mainfrm.cc:856
2047#: n:281
2048msgid "&Cancel Measuring Line\tEscape"
2049msgstr "&Zrušit líniu meraní\tEscape"
2050
2051#: ../src/mainfrm.cc:863
2052#: n:299
2053msgid "&Indicators"
2054msgstr "Indiká&tory"
2055
2056#: ../src/z_getopt.c:695
2057#: ../src/z_getopt.c:707
2058#: n:300
2059#, c-format
2060msgid "%s: option “%s” is ambiguous\n"
2061msgstr "%s: možnosť “%s” je dvojznačná\n"
2062
2063#: ../src/z_getopt.c:1023
2064#: ../src/z_getopt.c:1034
2065#: n:301
2066#, c-format
2067msgid "%s: option “-W %s” is ambiguous\n"
2068msgstr "%s: možnosť “-W %s” je dvojznačná\n"
2069
2070#: ../src/z_getopt.c:751
2071#: ../src/z_getopt.c:755
2072#: n:302
2073#, c-format
2074msgid "%s: option “%c%s” doesn’t allow an argument\n"
2075msgstr "%s: možnosť “%c%s” neumožňuje argument\n"
2076
2077#: ../src/z_getopt.c:740
2078#: ../src/z_getopt.c:743
2079#: n:303
2080#, c-format
2081msgid "%s: option “--%s” doesn’t allow an argument\n"
2082msgstr "%s: možnosť “--%s” neumožňuje argument\n"
2083
2084#: ../src/z_getopt.c:1058
2085#: ../src/z_getopt.c:1069
2086#: n:304
2087#, c-format
2088msgid "%s: option “-W %s” doesn’t allow an argument\n"
2089msgstr "%s: možnosť “-W %s” neumožňuje argument\n"
2090
2091#: ../src/z_getopt.c:790
2092#: ../src/z_getopt.c:802
2093#: ../src/z_getopt.c:1089
2094#: ../src/z_getopt.c:1101
2095#: n:305
2096#, c-format
2097msgid "%s: option “%s” requires an argument\n"
2098msgstr "%s: možnosť “%s” vyžaduje argument\n"
2099
2100#: ../src/z_getopt.c:960
2101#: ../src/z_getopt.c:971
2102#: ../src/z_getopt.c:1154
2103#: ../src/z_getopt.c:1166
2104#: n:306
2105#, c-format
2106msgid "%s: option requires an argument -- %c\n"
2107msgstr "%s: možnosť vyžaduje argument -- %c\n"
2108
2109#: ../src/z_getopt.c:840
2110#: ../src/z_getopt.c:843
2111#: n:307
2112#, c-format
2113msgid "%s: unrecognized option “--%s”\n"
2114msgstr "%s: nerozpoznaná možnosť “--%s”\n"
2115
2116#: ../src/z_getopt.c:851
2117#: ../src/z_getopt.c:854
2118#: n:308
2119#, c-format
2120msgid "%s: unrecognized option “%c%s”\n"
2121msgstr "%s: nerozpoznaná možnosť “%c%s”\n"
2122
2123#: ../src/z_getopt.c:901
2124#: ../src/z_getopt.c:904
2125#: n:309
2126#, c-format
2127msgid "%s: illegal option -- %c\n"
2128msgstr "%s: nepovolená možnosť -- %c\n"
2129
2130#: ../src/z_getopt.c:910
2131#: ../src/z_getopt.c:913
2132#: n:310
2133#, c-format
2134msgid "%s: invalid option -- %c\n"
2135msgstr "%s: nesprávna možnosť -- %c\n"
2136
2137#: ../src/mainfrm.cc:792
2138#: n:311
2139msgid "&New Presentation"
2140msgstr "&Nová prezentácia"
2141
2142#: ../src/mainfrm.cc:793
2143#: n:312
2144msgid "&Open Presentation…"
2145msgstr "&Otvoriť prezentáciu…"
2146
2147#: ../src/mainfrm.cc:794
2148#: n:313
2149msgid "&Save Presentation"
2150msgstr "&Ulož prezentáciu"
2151
2152#: ../src/mainfrm.cc:795
2153#: n:314
2154msgid "Sa&ve Presentation As…"
2155msgstr "Ulož prezentáciu a&ko…"
2156
2157#. TRANSLATORS: "Mark" as in "Mark this position"
2158#: ../src/mainfrm.cc:797
2159#: n:315
2160msgid "&Mark"
2161msgstr "&Zvýrazni"
2162
2163#. TRANSLATORS: "Play" as in "Play back a recording"
2164#: ../src/mainfrm.cc:798
2165#: n:316
2166msgid "Pla&y"
2167msgstr "&Prehrať"
2168
2169#: ../src/mainfrm.cc:799
2170#: n:317
2171msgid "&Export as Movie…"
2172msgstr "&Vyexportuj ako film…"
2173
2174#: ../src/mainfrm.cc:2266
2175#: n:331
2176msgid "Export Movie"
2177msgstr "vygeneruj film"
2178
2179#: ../src/mainfrm.cc:326
2180#: n:319
2181msgid "Select an output filename"
2182msgstr "Zvoliť meno výstupného súboru"
2183
2184#: ../src/mainfrm.cc:323
2185#: ../src/mainfrm.cc:2188
2186#: n:320
2187msgid "Aven presentations"
2188msgstr "Prezentácie programu Aven"
2189
2190#. TRANSLATORS: title of the save screenshot dialog
2191#: ../src/mainfrm.cc:1810
2192#: n:321
2193msgid "Save Screenshot"
2194msgstr "Uložiť otlačok obrazovky"
2195
2196#: ../src/mainfrm.cc:2183
2197#: ../src/mainfrm.cc:2186
2198#: n:322
2199msgid "Select a presentation to open"
2200msgstr "Vybrať prezentáciu pre otvorenie"
2201
2202#: ../src/mainfrm.cc:405
2203#: n:323
2204#, c-format
2205msgid "Error in format of presentation file “%s”"
2206msgstr "Chyba vo formáte prezentačného súboru “%s”"
2207
2208#. TRANSLATORS: "Compass" as in Larry Fish’s cave surveying package, so probably shouldn’t
2209#. be translated
2210#: ../src/mainfrm.cc:1791
2211#: n:324
2212msgid "Compass PLT files"
2213msgstr "Súbory Compass PLT"
2214
2215#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying package, so don’t translate it.
2216#: ../src/mainfrm.cc:1793
2217#: n:325
2218msgid "CMAP XYZ files"
2219msgstr "Súbory CMAP XYZ"
2220
2221#. TRANSLATORS: title of message box
2222#: ../src/mainfrm.cc:1866
2223#: ../src/mainfrm.cc:2160
2224#: ../src/mainfrm.cc:2177
2225#: n:326
2226msgid "Modified Presentation"
2227msgstr "Upravená prezentácia"
2228
2229#. TRANSLATORS: and the question in that box
2230#: ../src/mainfrm.cc:1865
2231#: ../src/mainfrm.cc:2159
2232#: ../src/mainfrm.cc:2176
2233#: n:327
2234msgid "The current presentation has been modified.  Abandon unsaved changes?"
2235msgstr "Prezentácia bola zmenená. Nechcete radšej uožiť zmeny?"
2236
2237#: ../src/mainfrm.cc:2477
2238#: ../src/mainfrm.cc:2486
2239#: n:328
2240msgid "No matches were found."
2241msgstr "Neúspešné hľadanie."
2242
2243#~ msgid "Open &Terrain…"
2244#~ msgstr "Otvoriť digitálny model &terénu…"
2245
2246#~ msgid "Solid Su&rface"
2247#~ msgstr "Neprie&hľadný povrch"
2248
2249#. TRANSLATORS: number of stations found matching search
2250#, c-format
2251#~ msgid "%d found"
2252#~ msgstr "%d nájdených"
2253
2254#. TRANSLATORS: "Find stations" button tooltip
2255#: ../src/mainfrm.cc:935
2256#: n:332
2257msgid "Find"
2258msgstr "Hľadať"
2259
2260#. TRANSLATORS: "Hide stations" button default tooltip
2261#: ../src/mainfrm.cc:936
2262#: ../src/mainfrm.cc:2518
2263#: n:333
2264msgid "Hide"
2265msgstr "Schovať"
2266
2267#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2268#: ../src/mainfrm.cc:2479
2269#: n:334
2270#, c-format
2271msgid "Hide %d found stations"
2272msgstr "Skryť %d nájdených bodov"
2273
2274#: ../src/mainfrm.cc:206
2275#: ../src/mainfrm.cc:1936
2276#: ../src/mainfrm.cc:1940
2277#: ../src/mainfrm.cc:2005
2278#: ../src/mainfrm.cc:2007
2279#: ../src/mainfrm.cc:2050
2280#: ../src/mainfrm.cc:2054
2281#: n:335
2282msgid "Altitude"
2283msgstr "Nadmorská výška"
2284
2285#. TRANSLATORS: error if you try to drag multiple files to the aven window
2286#: ../src/mainfrm.cc:679
2287#: n:336
2288msgid "You may only view one 3d file at a time."
2289msgstr "Môžete prehliadať iba jeden 3D súbor"
2290
2291#: ../src/mainfrm.cc:864
2292#: n:337
2293msgid "&Side Panel"
2294msgstr "&Postranný panel"
2295
2296#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
2297#: ../src/mainfrm.cc:1935
2298#: ../src/mainfrm.cc:1938
2299#: ../src/mainfrm.cc:1961
2300#: ../src/mainfrm.cc:1963
2301#: ../src/mainfrm.cc:2049
2302#: ../src/mainfrm.cc:2052
2303#: n:338
2304msgid "%.2f E, %.2f N"
2305msgstr "%.2f V, %.2f S"
2306
2307#. TRANSLATORS: Used in Aven:
2308#. From <stationname>
2309#. H: 123.45m V: 234.56m
2310#. Dist: 456.78m  Brg: 200
2311#: ../src/mainfrm.cc:1978
2312#: ../src/mainfrm.cc:2017
2313#: ../src/mainfrm.cc:2073
2314#: n:339
2315#, c-format
2316msgid "From %s"
2317msgstr "Od %s"
2318
2319#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2320#: ../src/mainfrm.cc:2077
2321#: ../src/mainfrm.cc:2080
2322#: n:340
2323#, c-format
2324msgid "H %.2f%s, V %.2f%s"
2325msgstr "H %.2f%s, V %.2f%s"
2326
2327#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
2328#: ../src/mainfrm.cc:2093
2329#: ../src/mainfrm.cc:2097
2330#: n:341
2331#, c-format
2332msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2333msgstr "%s: %s, Vzd %.2f%s, Azim %03d%s"
2334
2335#. TRANSLATORS: tickable menu item in View menu
2336#: ../src/gfxcore.cc:3034
2337#: ../src/gfxcore.cc:3049
2338#: ../src/mainfrm.cc:866
2339#: n:342
2340msgid "&Metric"
2341msgstr "&Metricky"
2342
2343#. TRANSLATORS: tickable menu item in View menu.
2344#. Degrees are the angular measurement where there are 360 in a
2345#. full circle.
2346#: ../src/gfxcore.cc:3011
2347#: ../src/gfxcore.cc:3024
2348#: ../src/mainfrm.cc:867
2349#: n:343
2350msgid "&Degrees"
2351msgstr "&Stupne"
2352
2353#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2354#: ../src/gfxcore.cc:3010
2355#: n:387
2356msgid "&Hide Compass"
2357msgstr "&skryť azimut"
2358
2359#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2360#: ../src/gfxcore.cc:3023
2361#: n:384
2362msgid "&Hide Clino"
2363msgstr "&skryť sklon"
2364
2365#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2366#: ../src/gfxcore.cc:3033
2367#: n:385
2368msgid "&Hide scale bar"
2369msgstr "&skryť mierku"
2370
2371#. TRANSLATORS: Menu item which turns off the colour key.
2372#. The "Colour Key" is the thing in aven showing which colour
2373#. corresponds to which depth, date, survey closure error, etc.
2374#: ../src/gfxcore.cc:3047
2375#: n:386
2376msgid "&Hide colour key"
2377msgstr "&skryť popis farieb"
2378
2379#. TRANSLATORS: degree symbol - probably should be translated to itself.
2380#: ../src/mainfrm.cc:1982
2381#: ../src/mainfrm.cc:2086
2382#: ../src/printwx.cc:926
2383#: ../src/printwx.cc:951
2384#: ../src/printwx.cc:955
2385#: ../src/printwx.cc:959
2386#: ../src/printwx.cc:966
2387#: n:344
2388msgid "°"
2389msgstr "°"
2390
2391#. TRANSLATORS: alternative angle units (400 grad = 360 degrees = full circle).
2392#. Try to make this as short as sensibly possible.
2393#.
2394#. E.g. in Italian and Spanish we use "g.cent." rather than
2395#. "gradi quattrocentesimali"/"grados centesimales"
2396#: ../src/mainfrm.cc:1985
2397#: ../src/mainfrm.cc:2089
2398#: n:345
2399msgid "grad"
2400msgstr "grády"
2401
2402#: ../src/mainfrm.cc:849
2403#: n:347
2404#~ msgid "&Preferences…"
2405#~ msgstr "&Predvoľby…"
2406
2407#: n:348
2408#~ msgid "Draw passage walls"
2409#~ msgstr "Vykresliť steny priestorov"
2410
2411#: n:349
2412#~ msgid "Estimate LRUD readings based on heuristics"
2413#~ msgstr "Odhadnuté rozmery rezu na základe heuristiky"
2414
2415#: n:350
2416#~ msgid "Mark survey stations with crosses"
2417#~ msgstr "Vyznačiť meračské body krížikmi"
2418
2419#: n:351
2420#~ msgid "Highlight stations marked as entrances"
2421#~ msgstr "Zvýrazniť body označené ako vchody"
2422
2423#: n:352
2424#~ msgid "Highlight stations marked as fixed points"
2425#~ msgstr "Zvýrazniť body označené ako fixné body"
2426
2427#: n:353
2428#~ msgid "Highlight stations which are exported"
2429#~ msgstr "Zvýrazniť vyexportované body"
2430
2431#: n:354
2432#~ msgid "Mark survey stations with their names"
2433#~ msgstr "Doplniť body ich názvami"
2434
2435#: n:355
2436#~ msgid "Allow names to overlap on the display (faster)"
2437#~ msgstr "Povoliť prekrývanie názvov na obrazovke (rýchlejšie)"
2438
2439#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2440#. "survey stations".
2441#: n:357
2442#~ msgid "Display underground survey legs"
2443#~ msgstr "Zobraziť podzemné zámery"
2444
2445#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2446#. "survey stations".
2447#: n:358
2448#~ msgid "Display surface survey legs"
2449#~ msgstr "Zobraziť povrchové zámery"
2450
2451#: n:359
2452#~ msgid "Colour surface surveys by depth"
2453#~ msgstr "Zafarbiť povrchové zámery podľa výšky"
2454
2455#: n:360
2456#~ msgid "Draw surface legs with dashed lines"
2457#~ msgstr "Zobraziť povrchové zámery čiarkovano"
2458
2459#: n:361
2460#~ msgid "Draw a grid"
2461#~ msgstr "Zobraziť sieť"
2462
2463#: n:362
2464#~ msgid "metric units"
2465#~ msgstr "metrických jednotkách"
2466
2467#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
2468#. the USA (rather confusingly now that England has largely gone metric!)
2469#: n:363
2470#~ msgid "imperial units"
2471#~ msgstr "anglosaských jednotkách"
2472
2473#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
2474#. full circle.
2475#: n:364
2476#~ msgid "degrees (°)"
2477#~ msgstr "stupňoch (°)"
2478
2479#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
2480#. full circle.
2481#: n:365
2482#~ msgid "grads"
2483#~ msgstr "grádoch"
2484
2485#: n:366
2486#~ msgid "Display measurements in"
2487#~ msgstr "Zobraziť dļžky v"
2488
2489#: n:367
2490#~ msgid "Display angles in"
2491#~ msgstr "Zobraziť uhly v"
2492
2493#. TRANSLATORS: reverses the sense of the mouse controls
2494#: n:368
2495#~ msgid "Reverse the sense of the controls"
2496#~ msgstr "Obrátiť zmysel kontroly"
2497
2498#: n:369
2499#~ msgid "Display scale bar"
2500#~ msgstr "Zobraziť mierku"
2501
2502#: n:370
2503#~ msgid "Display depth bar"
2504#~ msgstr "Zobraziť hļbkovú škálu"
2505
2506#: n:371
2507#~ msgid "Display compass"
2508#~ msgstr "Zobraziť kompas"
2509
2510#: n:372
2511#~ msgid "Display clinometer"
2512#~ msgstr "Zobraziť sklon"
2513
2514#: n:373
2515#~ msgid "Display side panel"
2516#~ msgstr "Zobraziť bočný panel"
2517
2518#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
2519#: ../src/mainfrm.cc:1989
2520#: ../src/mainfrm.cc:1992
2521#: n:374
2522#, fuzzy, c-format
2523msgid "%s: H %.2f%s, Brg %03d%s"
2524msgstr "%s: H %.2f%s, Azim %03d%s"
2525
2526#. TRANSLATORS: "V" is short for "Vertical"
2527#: ../src/mainfrm.cc:2020
2528#: ../src/mainfrm.cc:2023
2529#: n:375
2530#, fuzzy, c-format
2531msgid "%s: V %.2f%s"
2532msgstr "%s: V %.2f%s"
2533
2534#. TRANSLATORS: labels for tabbed side panel
2535#. this is for the tab with the tree hierarchy of survey station names
2536#: ../src/mainfrm.cc:987
2537#: n:376
2538msgid "Surveys"
2539msgstr "Merania"
2540
2541#: ../src/mainfrm.cc:988
2542#: n:377
2543msgid "Presentation"
2544msgstr "Zobrazenie"
2545
2546#: ../src/mainfrm.cc:204
2547#: n:378
2548msgid "Easting"
2549msgstr "východ"
2550
2551#: ../src/mainfrm.cc:205
2552#: n:379
2553msgid "Northing"
2554msgstr "sever"
2555
2556#: ../src/mainfrm.cc:742
2557#: n:380
2558msgid "&Print…\tCtrl+P"
2559msgstr "&Tlačiť…\tCtrl+P"
2560
2561#: ../src/mainfrm.cc:743
2562#: n:381
2563msgid "P&age Setup…"
2564msgstr "&Nastavení tisku…"
2565
2566#: ../src/mainfrm.cc:746
2567#: n:382
2568msgid "&Export as…"
2569msgstr "&Export ako…"
2570
2571#. TRANSLATORS: Title of file dialog to choose name and type of exported file.
2572#: ../src/printwx.cc:566
2573#: n:401
2574msgid "Export as:"
2575msgstr "Exportuj ako:"
2576
2577#. TRANSLATORS: Title of the export dialog
2578#: ../src/printwx.cc:286
2579#: n:383
2580msgid "Export"
2581msgstr "Export"
2582
2583#. TRANSLATORS: for about box:
2584#: ../src/aboutdlg.cc:134
2585#: n:390
2586msgid "System Information:"
2587msgstr "Informácie o systéme:"
2588
2589#. TRANSLATORS: Title of the print preview dialog
2590#: ../src/printwx.cc:605
2591#: n:398
2592msgid "Print Preview"
2593msgstr "Náhľad tlače"
2594
2595#. TRANSLATORS: Title of the print dialog
2596#: ../src/printwx.cc:286
2597#: n:399
2598msgid "Print"
2599msgstr "Tlačiť"
2600
2601#: ../src/printwx.cc:517
2602#: n:400
2603msgid "&Print…"
2604msgstr "&Tlačiť…"
2605
2606#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2607#. "survey stations".
2608#: ../src/printwx.cc:430
2609#: n:403
2610msgid "Sur&face Survey Legs"
2611msgstr "Zámery &na povrchu"
2612
2613#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2614#: ../src/mainfrm.cc:96
2615#: n:404
2616msgid "Edit Waypoint"
2617msgstr "Zmeniť miesto pohľadu"
2618
2619#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint in a presentation.
2620#: ../src/mainfrm.cc:133
2621#: n:278
2622msgid " (unused in perspective view)"
2623msgstr " (nepoužíva sa v perspektívnom zobrazení)"
2624
2625#. TRANSLATORS: Field label in dialog to edit a waypoint in a presentation.
2626#: ../src/mainfrm.cc:138
2627#: n:279
2628msgid "Time: "
2629msgstr "Čas: "
2630
2631#. TRANSLATORS: units+info after time field in dialog to edit a waypoint in a presentation.
2632#: ../src/mainfrm.cc:140
2633#: n:282
2634msgid " secs (0 = auto; *6 = 6 times auto)"
2635msgstr " sekundy (0 = auto; *6 = 6 krát auto)"
2636
2637#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
2638#. things in future).
2639#: ../src/aven.cc:219
2640#: n:405
2641#, c-format
2642msgid "This version of %s requires OpenGL to work, but it isn’t available."
2643msgstr "Verzia %s vyžaduje funkčné OpenGL, ale to nie je dostupné."
2644
2645#. TRANSLATORS: for diffpos:
2646#: ../src/diffpos.c:158
2647#: n:500
2648#, c-format
2649msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2650msgstr "Posun (%3.2f,%3.2f,%3.2f): %s"
2651
2652#. TRANSLATORS: for diffpos:
2653#: ../src/diffpos.c:194
2654#: n:501
2655#, c-format
2656msgid "Added: %s"
2657msgstr "Pridané: %s"
2658
2659#. TRANSLATORS: for diffpos:
2660#: ../src/diffpos.c:216
2661#: n:502
2662#, c-format
2663msgid "Deleted: %s"
2664msgstr "Zrušené: %s"
2665
2666#. TRANSLATORS: for extend:
2667#. the user specified breaking a loop or changing extend direction at
2668#. this station, but we didn’t find it in the 3d file
2669#: ../src/extend.c:258
2670#: ../src/extend.c:275
2671#: ../src/extend.c:315
2672#: ../src/extend.c:355
2673#: ../src/extend.c:395
2674#: n:510
2675#, c-format
2676msgid "Failed to find station %s"
2677msgstr "Nepodarilo sa nájsť bod %s"
2678
2679#. TRANSLATORS: for extend:
2680#. the user specified breaking a loop or changing extend direction at
2681#. this leg, but we didn’t find it in the 3d file
2682#: ../src/extend.c:297
2683#: ../src/extend.c:337
2684#: ../src/extend.c:377
2685#: ../src/extend.c:417
2686#: n:511
2687#, c-format
2688msgid "Failed to find leg %s → %s"
2689msgstr "Nepodarilo sa nájsť zámeru %s → %s"
2690
2691#. TRANSLATORS: for extend:
2692#. "extend" is starting to produce an extended elevation from station %s
2693#: ../src/extend.c:252
2694#: n:512
2695#, c-format
2696msgid "Starting from station %s"
2697msgstr "Začať od bodu %s"
2698
2699#. TRANSLATORS: for extend:
2700#: ../src/extend.c:268
2701#: n:513
2702#, c-format
2703msgid "Extending to the left from station %s"
2704msgstr "Rozvinutý rez vľavo od bodu %s"
2705
2706#. TRANSLATORS: for extend:
2707#: ../src/extend.c:308
2708#: n:514
2709#, c-format
2710msgid "Extending to the right from station %s"
2711msgstr "Rozvinutý rez vpravo od bodu %s"
2712
2713#. TRANSLATORS: for extend:
2714#: ../src/extend.c:287
2715#: n:515
2716#, c-format
2717msgid "Extending to the left from leg %s → %s"
2718msgstr "Rozvinutý rez vľavo od zámery %s → %s"
2719
2720#. TRANSLATORS: for extend:
2721#: ../src/extend.c:327
2722#: n:516
2723#, c-format
2724msgid "Extending to the right from leg %s → %s"
2725msgstr "Rozvinutý rez vpravo od zámery %s → %s"
2726
2727#. TRANSLATORS: for extend:
2728#: ../src/extend.c:388
2729#: n:517
2730#, c-format
2731msgid "Breaking survey loop at station %s"
2732msgstr "Prerušený okruh na bode %s"
2733
2734#. TRANSLATORS: for extend:
2735#: ../src/extend.c:407
2736#: n:518
2737#, c-format
2738msgid "Breaking survey loop at leg %s → %s"
2739msgstr "Prerušený okruh v zámere %s → %s"
2740
2741#. TRANSLATORS: for extend:
2742#: ../src/extend.c:348
2743#: n:519
2744#, c-format
2745msgid "Swapping extend direction from station %s"
2746msgstr "Zrkadlový smer rozvinutého rezu od bodu %s"
2747
2748#. TRANSLATORS: for extend:
2749#: ../src/extend.c:367
2750#: n:520
2751#, c-format
2752msgid "Swapping extend direction from leg %s → %s"
2753msgstr "Zrkadlový smer rozvinutého rezu od zámery %s → %s"
2754
2755#. TRANSLATORS: for extend:
2756#: ../src/extend.c:533
2757#: n:521
2758#, c-format
2759msgid "Applying specfile: “%s”"
2760msgstr "Použiť nastavenie zo súboru: “%s”"
2761
2762#. TRANSLATORS: for extend:
2763#. Used to tell the user that a file is being written - %s is the filename
2764#: ../src/extend.c:593
2765#: n:522
2766#, c-format
2767msgid "Writing %s…"
2768msgstr "Zapisuje sa súbor %s…"
2769
2770#: ../src/findentrances.cc:100
2771#: ../src/gpx.cc:70
2772#: n:287
2773#, c-format
2774msgid "Failed to initialise input coordinate system “%s”"
2775msgstr "Zlyhal pokus o inicializáciu vstupného súradnicového systému “%s”"
2776
2777#: ../src/findentrances.cc:103
2778#: ../src/gpx.cc:76
2779#: n:288
2780#, c-format
2781msgid "Failed to initialise output coordinate system “%s”"
2782msgstr "Zlyhal pokus o inicializáciu výstupného súradnicového systému “%s”"
2783
2784#: ../src/findentrances.cc:155
2785#: n:388
2786msgid "-d PROJ_DATUM 3D_FILE"
2787msgstr "-d PROJ_DÁTUM 3D_SÚBOR"
2788
2789#. TRANSLATORS: The findentrances utility uses the PROJ library to do
2790#. coordinate transformations (https://trac.osgeo.org/proj/) - you
2791#. pass findentrances a string to tell PROJ what the input datum is.
2792#: ../src/findentrances.cc:146
2793#: ../src/printwx.cc:495
2794#: n:389
2795msgid "input datum as string to pass to PROJ"
2796msgstr "Vložiť dátum ako text pre PROJ"
2797
2798#: ../src/readval.c:338
2799#: n:392
2800msgid "Separator in survey name"
2801msgstr ""
2802
2803#: ../src/readval.c:124
2804#: ../src/readval.c:139
2805#: ../src/readval.c:156
2806#: n:3
2807msgid "Can't have a leg between two anonymous stations"
2808msgstr ""
2809
2810#: ../src/dump3d.c:51
2811#: n:396
2812msgid "show survey date information (if present)"
2813msgstr ""
2814
2815#: ../src/mainfrm.cc:816
2816#: n:406
2817#, fuzzy
2818msgid "Spla&y Legs"
2819msgstr "Splay Legs (&z)"
2820
2821#: ../src/mainfrm.cc:813
2822#: n:407
2823msgid "&Hide"
2824msgstr "&Skryť"
2825
2826#: ../src/mainfrm.cc:814
2827#: n:408
2828msgid "&Fade"
2829msgstr ""
2830
2831#: ../src/mainfrm.cc:815
2832#: n:409
2833msgid "&Show"
2834msgstr "&Zobraziť"
2835
2836#: ../src/printwx.cc:345
2837#: n:410
2838msgid "Export format"
2839msgstr ""
Note: See TracBrowser for help on using the repository browser.