source: git/lib/ro.po @ 0056ee1

msgid ""
msgstr ""
"Project-Id-Version: survex\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2012-12-28 23:30:49 +0000\n"
"Last-Translator: Olly Betts <olly@survex.com>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
#. allocate space for.
#: ../src/message.c:83
#: n:1
#, c-format
msgid "Out of memory (couldn’t find %lu bytes)."
msgstr "Memorie insuficienta (nu am putut gasi %lu bytes)"

#. TRANSLATORS: Feel free to translate as "or newer" instead of "or greater" if that
#. gives a more natural translation.  It's technically not quite right when there are
#. parallel active release series (e.g. Survex 1.0.40 was released *after* 1.2.0), but
#. this seems unlikely to confuse users.
#: ../src/commands.c:1567
#: n:2
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "Este necesara versiunea Survex %s sau superioara pentru procesarea acestor date"

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#: ../src/aven.cc:367
#: ../src/message.c:1215
#: n:4
msgid "warning"
msgstr "avertisment"

#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u by
#. the line number in that file.
#: ../src/datain.c:105
#: n:5
#, c-format
msgid "In file included from %s:%u:\n"
msgstr "In fisierul inclus de %s:%u:\n"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:535
#: n:6
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix contine eroare - folositi in schimb *begin si *end"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/readval.c:205
#: n:7
#, c-format
msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "Folosirea caracterului “%c” in numele statiei, nu este permisa (folositi *SET NAMES pentru a modifica lista de caractere)"

#: ../src/readval.c:384
#: n:8
msgid "Field may not be omitted"
msgstr "Aceasta rubrica nu poate fi omisa"

#: ../src/datain.c:1470
#: ../src/datain.c:1750
#: ../src/readval.c:386
#: ../src/readval.c:427
#: ../src/readval.c:457
#: n:9
#, c-format
msgid "Expecting numeric field, found “%s”"
msgstr "Se asteapta camp numeric, s-a gasit “%s”"

#: ../src/commands.c:1473
#: n:10
#, c-format
msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
msgstr "S-a gasit “%s”, se astepta “PRESERVE”, “TOUPPER” sau “TOLOWER”"

#: ../src/debug.h:45
#: ../src/debug.h:47
#: ../src/matrix.c:359
#: ../src/message.c:233
#: n:11
msgid "Bug in program detected! Please report this to the authors"
msgstr "Eroare de program! Va rugam anuntati autorii"

#: ../src/commands.c:1681
#: ../src/extend.c:420
#: n:12
#, c-format
msgid "Unknown command “%s”"
msgstr "Comanda necunoscuta “%s”"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netbits.c:401
#: n:13
#, c-format
msgid "Station “%s” equated to itself"
msgstr "Statia “%s” este egala cu ea insasi"

#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between survey stations.
#: ../src/datain.c:998
#: n:14
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "Valoarea azimutului poate fi omisa doar in cazul vizelor verticale"

#: ../src/datain.c:244
#: ../src/extend.c:425
#: n:15
msgid "End of line not blank"
msgstr "Sfarsitul liniei nu este gol"

#: ../src/cavern.c:385
#: n:16
#, c-format
msgid "There were %d warning(s)."
msgstr "Au fost %d avertismente."

#. TRANSLATORS: pipe here means a Unix pipe, which transfers data between two programs.
#. Possibly better not to translate it.
#: ../src/cavernlog.cc:224
#: n:17
#, c-format
msgid "Couldn’t open pipe: “%s”"
msgstr "Nu s-a putut deschide “pipe”: “%s”"

#: ../src/datain.c:80
#: ../src/datain.c:88
#: ../src/datain.c:95
#: ../src/datain.c:731
#: ../src/extend.c:543
#: ../src/sorterr.c:75
#: ../src/sorterr.c:92
#: ../src/sorterr.c:234
#: n:18
msgid "Error reading file"
msgstr "Eroare in citirea fisierului"

#: ../src/message.c:1230
#: n:19
msgid "Too many errors - giving up"
msgstr "Prea multe erori - proces intrerupt"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:1352
#: n:20
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "*DEFAULT nu mai este folosit - folositi in schimb *CALIBRATE/DATA/SD/UNITS cu argumentul DEFAULT"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
#. So the problem here is that the leg is vertical, so a compass reading has
#. no meaning!
#: ../src/datain.c:971
#: n:21
msgid "Compass reading given on plumbed leg"
msgstr "Citire a busolei la o masuratoare verticala"

#: ../src/commands.c:619
#: n:22
msgid "END with no matching BEGIN in this file"
msgstr "END nu are un corespondent BEGIN in acest fisier"

#: ../src/datain.c:718
#: n:23
msgid "BEGIN with no matching END in this file"
msgstr "BEGIN nu are un corespondent END in acest fisier"

#: ../src/datain.c:361
#: ../src/img.c:178
#: ../src/printwx.cc:1234
#: n:24
#, c-format
msgid "Couldn’t open data file “%s”"
msgstr "Nu am reusit deschiderea fisierului de date “%s”"

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
#. deprecated, so this error would be generated by:
#.
#. *equate \foo.7 1
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:444
#: ../src/readval.c:90
#: ../src/readval.c:94
#: n:25
msgid "ROOT is deprecated"
msgstr "ROOT nu se recomanda"

#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
#. "Station “\outer.inner.1” not exported from survey “\outer”)":
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#: ../src/commands.c:861
#: ../src/listpos.c:107
#: ../src/readval.c:324
#: n:26
#, c-format
msgid "Station “%s” not exported from survey “%s”"
msgstr "Punctul de statie “%s” nu a fost exportat din masuratoarea “%s”"

#. TRANSLATORS: This error occurs if there's an attempt to export a station
#. from a survey which doesn't actually exist.
#: ../src/listpos.c:110
#: n:286
#, c-format
msgid "Reference to station “%s” from non-existent survey “%s”"
msgstr ""

#: ../src/readval.c:296
#: n:27
#, c-format
msgid "“%s” can’t be both a station and a survey"
msgstr "“%s” nu poate fi acelasi timp punct de statie si denumire de masuratoare"

#: ../src/extend.c:247
#: ../src/extend.c:262
#: ../src/extend.c:302
#: ../src/extend.c:342
#: ../src/extend.c:382
#: ../src/readval.c:202
#: n:28
msgid "Expecting station name"
msgstr "Lipseste numele punctului de statie"

#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:507
#: n:29
msgid "Reentering an existing prefix level is deprecated"
msgstr "Reintroducerea unui prefix deja existent nu este recomandata"

#: ../src/commands.c:514
#: n:30
msgid "Originally entered here"
msgstr "Introdus aici in original"

#: ../src/commands.c:1503
#: n:31
#, c-format
msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
msgstr "S-a gasit “%s” in loc de “EQUATES”, “EXPORTS”, sau “PLUMBS”"

#: ../src/commands.c:1510
#: n:32
#, c-format
msgid "Found “%s”, expecting “ON” or “OFF”"
msgstr "S-a gasit “%s” in loc de “ON” sau “OFF”"

#. TRANSLATORS: EQUATE is a command name, so shouldn’t be translated.
#: ../src/commands.c:834
#: n:33
msgid "Only one station in EQUATE command"
msgstr "Doar un punct de statie in comanda EQUATE"

#: ../src/commands.c:398
#: n:34
#, c-format
msgid "Unknown quantity “%s”"
msgstr "Cantitate necunoscuta “%s”"

#: ../src/commands.c:318
#: n:35
#, c-format
msgid "Unknown units “%s”"
msgstr "Unitati necunoscute “%s”"

#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:636
#: n:36
msgid "Matching BEGIN tag has no prefix"
msgstr "BEGIN nu are nici un prefix corespondent"

#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
#. the correct term in other languages may be singular.
#: ../src/commands.c:328
#: n:37
#, c-format
msgid "Invalid units “%s” for quantity"
msgstr "Unitate incorecta “%s” pentru cantitate"

#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
#. a filename parameter - we don’t really want it here, so lose it with "%.0s"
#. (which should display 0 characters from the filename) FIXME: sort out this
#: ../src/img.c:179
#: n:38
msgid "Out of memory %.0s"
msgstr "Memorie insuficienta %.0s"

#: ../src/commands.c:391
#: n:39
#, c-format
msgid "Unknown instrument “%s”"
msgstr "Instrument necunoscut “%s”"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
#: ../src/commands.c:1324
#: n:40
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "Raportul scarii trebuie sa fie 1.0 pentru DECLINATION"

#. TRANSLATORS: If the scale factor for an instrument is zero, then any reading
#. would be mapped to zero, which doesn't make sense.
#: ../src/commands.c:1328
#: n:391
msgid "Scale factor must be non-zero"
msgstr "Raportul scarii trebuie sa fie diferit de zero"

#: ../src/commands.c:1371
#: n:41
#, c-format
msgid "Unknown setting “%s”"
msgstr "Parametru necunoscut “%s”"

#: ../src/commands.c:436
#: n:42
#, c-format
msgid "Unknown character class “%s”"
msgstr "Clasa de caractere necunoscuta “%s”"

#: ../src/extend.c:589
#: ../src/netskel.c:89
#: n:43
msgid "No survey data"
msgstr "Lipsesc masuratorile topografice"

#: ../src/filename.c:52
#: ../src/img.c:180
#: n:44
#, c-format
msgid "Filename “%s” refers to directory"
msgstr "Fisierul “%s” este un director"

#: ../src/netartic.c:384
#: n:45
msgid "Survey not all connected to fixed stations"
msgstr "Topografia nu este complet conectata la puncte fixate"

#: ../src/commands.c:770
#: ../src/datain.c:644
#: n:46
msgid "Station already fixed or equated to a fixed point"
msgstr "Punct de statie deja fixat sau echivalat cu un punct fix"

#: ../src/cavern.c:288
#: ../src/filename.c:55
#: ../src/img.c:181
#: n:47
#, c-format
msgid "Failed to open output file “%s”"
msgstr "Nu este posibila deschiderea fisierului “%s”"

#: ../src/commands.c:1426
#: n:48
msgid "Standard deviation must be positive"
msgstr "Deviatia standard trebuie sa fie pozitiva"

#. TRANSLATORS: as in: Usage: cavern …
#: ../src/cmdline.c:165
#: n:49
msgid "Usage"
msgstr "Folosire"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#.
#. %s is replaced by the name of the station.
#: ../src/netbits.c:329
#: n:50
#, c-format
msgid "Survey leg with same station (“%s”) at both ends - typing error?"
msgstr "Masuratoare cu acelasi punct (“%s”) la ambele capete - eroare de transcriere?"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/datain.c:924
#: ../src/datain.c:932
#: ../src/datain.c:944
#: n:51
msgid "Clino reading over 90 degrees (absolute value)"
msgstr "Valoare a clinometrului peste 90 grade (valoare absoluta)"

#: ../src/netbits.c:416
#: n:52
#, c-format
msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
msgstr "Tentativa de egalizare a doua puncte de statie fixe diferite: “%s” si “%s”"

#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
#: ../src/netbits.c:422
#: n:53
#, c-format
msgid "Equating two equal fixed points: “%s” and “%s”"
msgstr "Egalizare a doua puncte de statie identice “%s” si “%s”"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:693
#: n:54
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "Comanda FIX fara coordonate - se atribuie (0,0,0)"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:773
#: ../src/datain.c:646
#: n:55
msgid "Station already fixed at the same coordinates"
msgstr "Punct de statie deja fixat cu aceleasi coordonate"

#: ../src/commands.c:686
#: n:56
msgid "More than one FIX command with no coordinates"
msgstr "Mai mult de o comanda FIX fara coordonate"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
#. would generate error 57:
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:1688
#: n:57
msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
msgstr "*EXPORT trebuie sa urmeze dupa “*BEGIN <TOPOGRAFIE>”"

#: ../src/readval.c:514
#: n:58
msgid "Invalid year (< 1900 or > 2078)"
msgstr "An gresit (< 1900 or > 2078)"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
#: ../src/datain.c:826
#: ../src/datain.c:835
#: n:59
msgid "Suspicious compass reading"
msgstr "Azimut suspect"

#: ../src/datain.c:1446
#: n:60
msgid "Negative tape reading"
msgstr "Distanta negativa"

#: ../src/commands.c:688
#: n:61
msgid "Same station fixed twice with no coordinates"
msgstr "Acelasi punct de statie fixat de doua ori fara coordonate"

#. TRANSLATORS: This means that the data fed in said this.
#. It could be a gross error (e.g. the decimal point is missing from
#. the depth gauge reading) or it could just be due to random error on
#. a near vertical leg
#: ../src/datain.c:1145
#: n:62
msgid "Tape reading is less than change in depth"
msgstr "Distanta este mai mica decat difeneta de nivel"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. neither style nor reading is a keyword in the program
#. This error complains about a depth gauge reading in normal style, for example
#: ../src/commands.c:1069
#: n:63
#, c-format
msgid "Reading “%s” not allowed in data style “%s”"
msgstr "Datele “%s” nu sunt permise in campul de date “%s”"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1238
#: n:64
#, c-format
msgid "Too few readings for data style “%s”"
msgstr "Lipsesc date pentru campul de date “%s”"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#: ../src/commands.c:1034
#: n:65
#, c-format
msgid "Data style “%s” unknown"
msgstr "Tipul de date “%s” necunoscut"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#.
#. Exporting a station twice give error 66:
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:905
#: n:66
#, c-format
msgid "Station “%s” already exported"
msgstr "Punctul de statie “%s” este deja exportat"

#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
#: ../src/commands.c:1089
#: n:67
#, c-format
msgid "Duplicate reading “%s”"
msgstr "Campul “%s” duplicat"

#: ../src/commands.c:800
#: n:68
#, c-format
msgid "FLAG “%s” unknown"
msgstr "FLAG “%s” necunoscut"

#: ../src/readval.c:471
#: n:69
msgid "Missing \""
msgstr "Lipseste \""

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/listpos.c:121
#: n:70
#, fuzzy, c-format
msgid "Station “%s” referred to just once, with an explicit prefix - typo?"
msgstr "Punctul de statie “%s” are o referinta unica, cu un prefix explicit - eroare de scriere?"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netartic.c:394
#: n:71
msgid "The following survey stations are not attached to a fixed point:"
msgstr "Urmatoarele puncte de statie nu sunt atasate unui punct fixat"

#: ../src/netskel.c:128
#: n:72
#, c-format
msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
msgstr "Topografia nu contine puncte fixate. Am fixat %s ca (0,0,0)"

#. TRANSLATORS: fixed survey station that is not part of any survey
#: ../src/netskel.c:914
#: n:73
#, c-format
msgid "Unused fixed point “%s”"
msgstr "Punct fix nefolosit “%s”"

#: ../src/matrix.c:123
#: n:74
msgid "Network solved by reduction - no simultaneous equations to solve."
msgstr "Retea rezolvata prin reducere - nici un sistem de ecuatii de rezolvat."

#: ../src/matrix.c:135
#: n:75
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "Rezolv %d ecuatii simultane"

#. TRANSLATORS: %c is “x”, “y” or “z”
#: ../src/matrix.c:150
#: n:76
#, c-format
msgid "Solving to find %c coordinates"
msgstr "Incerc sa gasesc coordonatele %c"

#: ../src/commands.c:1146
#: n:77
#, c-format
msgid "Reading “%s” duplicates previous reading(s)"
msgstr "Valoarea “%s” dubleaza campul/campurile precedent/e"

#: ../src/matrix.c:133
#: n:78
msgid "Solving one equation"
msgstr "Rezolv o ecuatie"

#: ../src/datain.c:897
#: ../src/datain.c:1139
#: ../src/datain.c:1327
#: n:79
msgid "Negative adjusted tape reading"
msgstr "Distanta corectata negativ"

#: ../src/commands.c:1604
#: ../src/commands.c:1624
#: n:80
msgid "Date is in the future!"
msgstr "Data se gaseste in viitor!"

#: ../src/commands.c:1628
#: n:81
msgid "End of date range is before the start"
msgstr "Data finala este anterioara datei de inceput"

#: ../src/avenprcore.cc:118
#: n:82
#, c-format
msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
msgstr "Parametrul “%s” are valoarea incorecta “%s” in fisierul de configurare a imprimantei"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
#. there is no station "entrance.27" in the centre-line.
#: ../src/netskel.c:999
#: n:83
#, c-format
msgid "Cross section specified at non-existent station “%s”"
msgstr ""

#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
#. foresight and a clino reading for the backsight, or something similar.
#: ../src/datain.c:958
#: ../src/datain.c:979
#: n:84
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "Citirile CLINO si BACKCLINO trebuie sa fie de acelasi tip."

#: ../src/avenprcore.cc:113
#: n:85
#, c-format
msgid "Parameter “%s” missing in printer configuration file"
msgstr "Parametrul “%s” lipseste din fisierul de configurare a imprimantei"

#: ../src/readval.c:522
#: n:86
msgid "Invalid month"
msgstr "Luna incorecta"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/readval.c:530
#: n:87
msgid "Invalid day of the month"
msgstr "Zi incorecta"

#: ../src/cavern.c:237
#: n:88
#, c-format
msgid "3d file format versions %d to %d supported"
msgstr ""

#, c-format
#~ msgid "Error in format of font file “%s”"
#~ msgstr "Eroare in formatul fisireului de font “%s”"

#: ../src/readval.c:200
#: n:89
msgid "Expecting survey name"
msgstr "Se asteapta o denumire de topografie"

#. TRANSLATORS: Program will exit shortly after printing this
#: ../src/message.c:224
#: n:90
msgid "Abnormal termination"
msgstr "Final anormal"

#: ../src/message.c:225
#: n:91
msgid "Arithmetic error"
msgstr "Eroare aritmetica"

#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
#: ../src/message.c:226
#: n:92
msgid "Illegal instruction"
msgstr "Instructiune ilegala"

#: ../src/extend.c:538
#: ../src/mainfrm.cc:376
#: ../src/sorterr.c:140
#: n:93
#, c-format
msgid "Couldn’t open file “%s”"
msgstr "Nu am putut deschide fisierul “%s”"

#: ../src/printwx.cc:402
#: n:402
#, c-format
msgid "Couldn’t write file “%s”"
msgstr ""

#: ../src/message.c:227
#: n:94
msgid "Bad memory access"
msgstr "Acces la memorie eronat"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:446
#: ../src/commands.c:509
#: ../src/commands.c:537
#: ../src/commands.c:1049
#: ../src/commands.c:1354
#: ../src/readval.c:96
#: n:95
#, fuzzy
msgid "Further uses of this deprecated feature will not be reported"
msgstr "Folosirea ulterioara a acestei functionalitati ??? nu va fi semnalata"

#: ../src/message.c:228
#: n:97
msgid "Unknown signal received"
msgstr "Semnal necunoscut receptionat"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/datain.c:863
#: n:98
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
msgstr "Lectura COMPASS si BACKCOMPASS nu concorda cu %s grade"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/datain.c:1027
#: n:99
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
msgstr "Lectura CLINO si BACKCLINO nu concorda cu %s grade"

#: ../src/cad3d.c:624
#: n:100
msgid "do not generate station markers"
msgstr ""

#: ../src/cad3d.c:625
#: n:101
msgid "do not generate station labels"
msgstr ""

#: ../src/cad3d.c:626
#: n:102
msgid "do not generate survey legs"
msgstr ""

#: ../src/cad3d.c:630
#: n:103
msgid "produce an elevation view"
msgstr ""

#: ../src/commands.c:1046
#: n:104
#, c-format
msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
msgstr "“*data %s %c …” nu este agreata - folositi “*data %s …” in loc"

#: ../src/extend.c:490
#: n:105
msgid "Reading in data - please wait…"
msgstr "Se citesc datele - va rog asteptati…"

#. TRANSLATORS: Perhaps the user tried to load a different type of file as a
#. Survex .3d file, or the .3d file was corrupted.
#: ../src/3dtopos.c:154
#: ../src/3dtopos.c:160
#: ../src/cad3d.c:866
#: ../src/cad3d.c:877
#: ../src/img.c:182
#: n:106
#, c-format
msgid "Bad 3d image file “%s”"
msgstr "Fisier imagine 3d “%s” gresit"

#. TRANSLATORS: This is the date format string used to timestamp .3d files
#. internally.  Probably best to keep it the same for all translations.
#: ../src/img.c:46
#: ../src/mainfrm.cc:1316
#: n:107
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: put in .3d file if we can’t read the date/time
#: ../src/mainfrm.cc:1309
#: n:108
msgid "Date and time not available."
msgstr "Data si ora nu sunt disponibile."

#: ../src/img.c:183
#: n:109
#, c-format
msgid "Error reading from file “%s”"
msgstr "Eroare in citirea fisierului “%s”"

#: ../src/filename.c:79
#: ../src/img.c:184
#: ../src/mainfrm.cc:334
#: ../src/mainfrm.cc:1803
#: n:110
#, c-format
msgid "Error writing to file “%s”"
msgstr "Eroare in scrierea fisierului “%s”"

#: ../src/filename.c:82
#: n:111
msgid "Error writing to file"
msgstr "Eroare in scrierea fisierului"

#: ../src/sorterr.c:76
#: ../src/sorterr.c:93
#: ../src/sorterr.c:164
#: n:112
msgid "Couldn’t parse .err file"
msgstr "Lectura fisierului .err nu a putut fi realizata"

#: ../src/cavern.c:380
#: n:113
#, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "Au fost %d avertisment(e) si %d eroare(erori) - nu s-a generat nici un fisier."

#: ../src/img.c:185
#: n:114
#, c-format
msgid "File “%s” has a newer format than this program can understand"
msgstr "Fisierul “%s” are un format prea nou pe care acest program nu il poate intelege"

#: ../src/printwx.cc:700
#: n:115
msgid "North"
msgstr "Nord"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printwx.cc:724
#: n:116
msgid "Elevation on"
msgstr "Profil in directia"

#: ../src/printwx.cc:294
#: n:117
msgid "P&lan view"
msgstr "&Plan"

#: ../src/printwx.cc:296
#: n:285
msgid "&Elevation"
msgstr "P&rofil"

#: ../src/gfxcore.cc:692
#: ../src/mainfrm.cc:126
#: n:118
msgid "Elevation"
msgstr "Profil"

#: ../src/cavern.c:342
#: n:120
msgid "Calculating statistics"
msgstr "Calculez statisticile"

#: ../src/readval.c:485
#: n:121
msgid "Expecting string field"
msgstr "Camp de caractere asteptat"

#: ../src/cmdline.c:208
#: n:122
msgid "too few arguments"
msgstr "Parametrii insuficienti"

#: ../src/cmdline.c:215
#: n:123
msgid "too many arguments"
msgstr "Prea multi parametrii"

#: ../src/cmdline.c:174
#: ../src/cmdline.c:177
#: ../src/cmdline.c:181
#: n:124
msgid "FILE"
msgstr "FISIER"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:162
#: n:125
msgid "Removing trailing traverses"
msgstr "Elimin traversele terminale"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#: ../src/netskel.c:216
#: n:126
msgid "Concatenating traverses between nodes"
msgstr "Leg traversele dintre noduri"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#: ../src/netskel.c:409
#: n:127
msgid "Calculating traverses between nodes"
msgstr "Calculez traversele dintre noduri"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:739
#: n:128
msgid "Calculating trailing traverses"
msgstr "Calculez traversele terminale"

#: ../src/network.c:82
#: n:129
msgid "Simplifying network"
msgstr "Simplific reteaua"

#: ../src/network.c:540
#: n:130
msgid "Calculating network"
msgstr "Calculez reteaua"

#: ../src/datain.c:1436
#: n:131
#, c-format
msgid "Found “%s”, expecting “F” or “B”"
msgstr "Am gasit “%s”, asteptam “F” sau “B”"

#: ../src/cavern.c:438
#: n:132
#, c-format
msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
msgstr "Lungimea totala a masuratorilor topografiei = %7.2fm (%7.2fm ajustat)"

#: ../src/cavern.c:441
#: n:133
#, c-format
msgid "Total plan length of survey legs = %7.2fm"
msgstr "Lungimea totala in plan a masuratorilor topografiei = %7.2fm"

#: ../src/cavern.c:444
#: n:134
#, c-format
msgid "Total vertical length of survey legs = %7.2fm"
msgstr "Lungimea totala verticala a masuratorilor topografiei = %7.2fm"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:450
#: n:135
#, c-format
msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Interval vertical = %4.2fm (de la %s la %4.2fm de la %s la %4.2fm)"

#. TRANSLATORS: c.f. previous message
#: ../src/cavern.c:451
#: n:136
#, c-format
msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Extindere Nord-Sud = %4.2fm (de la %s la %4.2fm de la %s la %4.2fm)"

#. TRANSLATORS: c.f. previous two messages
#: ../src/cavern.c:452
#: n:137
#, c-format
msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Extindere Est-Vest = %4.2fm (de la %s la %4.2fm de la %s la %4.2fm)"

#: ../src/cavern.c:426
#: n:138
msgid "There is 1 loop."
msgstr "Este 1 inchidere."

#: ../src/cavern.c:428
#: n:139
#, c-format
msgid "There are %ld loops."
msgstr "Sunt %ld inchideri."

#: ../src/cavern.c:364
#: n:140
#, c-format
msgid "CPU time used %5.2fs"
msgstr "Timp CPU folosit %5.2fs"

#: ../src/cavern.c:367
#: n:141
#, c-format
msgid "Time used %5.2fs"
msgstr "Timp utilizat %5.2fs"

#: ../src/cavern.c:369
#: n:142
msgid "Time used unavailable"
msgstr "Timp utilizat indisponibil"

#: ../src/cavern.c:372
#: n:143
#, c-format
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "Timp utilizat %5.2fs (timp CPU %5.2fs)"

#: ../src/cavern.c:376
#: n:144
msgid "Done."
msgstr "Gata."

#: ../src/netskel.c:717
#: n:145
#, c-format
msgid "Original length%7.2fm (%3d legs), moved%7.2fm (%5.2fm/leg). "
msgstr "Lungimea originala%7.2fm (%3d legs), ajustata%7.2fm (%5.2fm/masuratoare). "

#: ../src/netskel.c:720
#: n:146
#, c-format
msgid "Error%7.2f%%"
msgstr "Eroare%7.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
#. error per metre is meaningless
#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
#. the numbers in the message above.
#: ../src/netskel.c:722
#: n:147
msgid "Error    N/A"
msgstr "Eroare    N/A"

#: ../src/cad3d.c:627
#: n:148
#, c-format
msgid "generate grid (default %sm)"
msgstr ""

#: ../src/cad3d.c:628
#: n:149
#, c-format
msgid "station labels text height (default %s)"
msgstr ""

#: ../src/cad3d.c:629
#: n:152
#, c-format
msgid "station marker size (default %s)"
msgstr ""

#: ../src/cad3d.c:631
#: n:155
#, c-format
msgid "factor to scale down by (default %s)"
msgstr ""

#: ../src/cad3d.c:632
#: n:156
msgid "produce DXF output"
msgstr ""

#: ../src/cad3d.c:633
#: n:158
msgid "produce Sketch output"
msgstr ""

#: ../src/cad3d.c:634
#: n:159
msgid "produce Compass PLT output for Carto"
msgstr ""

#: ../src/cad3d.c:635
#: n:160
msgid "produce SVG output"
msgstr ""

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:137
#: n:150
msgid "display this help and exit"
msgstr "afişează acest mesaj şi termină"

#. TRANSLATORS: description of --verbose option
#: ../src/cmdline.c:139
#: n:151
msgid "output version information and exit"
msgstr "afişează informaţii despre versiune şi termină"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
#: ../src/cmdline.c:166
#: n:153
msgid "OPTION"
msgstr "OPŢIUNE"

#: ../src/mainfrm.cc:130
#: ../src/printwx.cc:259
#: ../src/printwx.cc:761
#: ../src/printwx.cc:815
#: n:154
msgid "Scale"
msgstr "Scara"

#: ../src/cmdline.c:190
#: n:157
#, c-format
msgid "Try “%s --help” for more information.\n"
msgstr "Încercaţi “%s --help” pentru informaclţii suplimentare.\n"

#: ../src/avenprcore.cc:262
#: n:166
#, c-format
msgid "Page %d of %d"
msgstr "Pagina %d din %d"

#: ../src/avenprcore.cc:265
#: ../src/printwx.cc:1240
#: n:167
#, c-format
msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
msgstr "Topografia “%s”   Pagina %d (din %d)   Procesat in %s"

#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
#. something like "123°".  The bearing is up the page.
#: ../src/printwx.cc:706
#: n:168
#, c-format
msgid "Plan view, %s up page"
msgstr ""

#. TRANSLATORS: This is used on printouts of elevations, with %s replaced by
#. something like "123°".  The bearing is the direction we’re looking.
#: ../src/printwx.cc:740
#: n:169
#, c-format
msgid "Elevation facing %s"
msgstr ""

#. TRANSLATORS: This is used on printouts of tilted elevations, with the first
#. %s replaced by something like "123°", and the second by something like "-45°".
#. The bearing is the direction we’re looking.
#: ../src/printwx.cc:745
#: n:284
#, c-format
msgid "Elevation facing %s, tilted %s"
msgstr ""

#. TRANSLATORS: This is used on printouts of extended elevations.
#: ../src/printwx.cc:753
#: n:191
msgid "Extended elevation"
msgstr "Profil longitudinal"

#: ../src/cavern.c:412
#: n:172
msgid "Survey contains 1 survey station,"
msgstr "Topografia contine 1 punct de statie,"

#: ../src/cavern.c:414
#: n:173
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "Topografia contine %ld puncte de statie,"

#: ../src/cavern.c:418
#: n:174
msgid " joined by 1 leg."
msgstr " unite printr-o masuratoare."

#: ../src/cavern.c:420
#: n:175
#, c-format
msgid " joined by %ld legs."
msgstr " unite prin %ld masuratori."

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:182
#: n:176
msgid "node"
msgstr "nod"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:182
#: n:177
msgid "nodes"
msgstr "noduri"

#. TRANSLATORS: connected component in the graph theory sense
#. It means there are %ld bits of survey with no connections between them
#. This message is only used if there are more than 1
#: ../src/cavern.c:434
#: n:178
#, c-format
msgid "Survey has %ld connected components."
msgstr "Topografia contine %ld componente conexe."

#. TRANSLATORS: Label for button in aven’s cavern log window which causes the
#. survey data to be reprocessed.
#: ../src/cavernlog.cc:389
#: ../src/cavernlog.cc:400
#: n:184
msgid "Reprocess"
msgstr ""

#: ../src/cmdline.c:238
#: ../src/cmdline.c:257
#: n:185
#, c-format
msgid "numeric argument “%s” out of range"
msgstr "argumentul numeric “%s” in afara intervalului acceptat"

#: ../src/cmdline.c:240
#: n:186
#, c-format
msgid "argument “%s” not an integer"
msgstr "argumentul “%s” nu este un intreg"

#: ../src/cmdline.c:259
#: n:187
#, c-format
msgid "argument “%s” not a number"
msgstr "argumentul “%s” nu este un numar"

#: ../src/commands.c:815
#: n:188
msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "Astept “DUPLICATE”, “SPLAY”, sau “SURFACE”"

#: ../src/commands.c:818
#: n:189
msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "Astept “NOT”, “DUPLICATE”, “SPLAY” sau “SURFACE”"

#: ../src/listpos.c:82
#: n:190
#, c-format
msgid "Station “%s” referred to by *entrance or *export but never used"
msgstr "Punctul de statie “%s” a fost definit ca *entrance sau *export dar nu a fost folost"

#: ../src/commands.c:617
#: n:192
msgid "No matching BEGIN"
msgstr "Lipseste BEGIN corespunzator"

#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it’s
#. given at all
#: ../src/commands.c:639
#: n:193
msgid "Prefix tag doesn’t match BEGIN"
msgstr "Prefixul nu corespunde cu cel al lui BEGIN"

#: ../src/commands.c:643
#: n:194
msgid "Closing prefix omitted from END"
msgstr "Prefixul de incheiere omis in END"

#. TRANSLATORS: heading line for .pos file
#. please try to ensure the “,”s (or at least the columns) are in the same place
#: ../src/3dtopos.c:109
#: n:195
msgid "( Easting, Northing, Altitude )"
msgstr "( Est (X), Nord (Y), Altitudine Z )"

#. TRANSLATORS: bpp is "Bits Per Pixel"
#: ../src/aboutdlg.cc:172
#: n:196
#, c-format
msgid "Display Depth: %d bpp"
msgstr ""

#. TRANSLATORS: appended to previous message if the display is colour
#: ../src/aboutdlg.cc:173
#: n:197
msgid " (colour)"
msgstr ""

#: ../src/readval.c:510
#: ../src/readval.c:520
#: ../src/readval.c:528
#: n:198
#, c-format
msgid "Expecting date, found “%s”"
msgstr "Date asteptate, “%s” gasit"

#. TRANSLATORS: --help output for --survey option
#. "this" has been added to English translation
#: ../src/3dtopos.c:50
#: ../src/aven.cc:63
#: ../src/cad3d.c:623
#: ../src/diffpos.c:57
#: ../src/dump3d.c:50
#: ../src/extend.c:443
#: n:199
msgid "only load the sub-survey with this prefix"
msgstr "incarcati doar sub-topografia cu prefixul"

#. TRANSLATORS: --help output for aven --print option
#: ../src/aven.cc:64
#: n:119
msgid "print and exit (requires a 3d file)"
msgstr ""

#. TRANSLATORS: --help output for cavern --percentage option
#: ../src/cavern.c:122
#: n:161
msgid "display percentage progress"
msgstr ""

#. TRANSLATORS: --help output for cavern --output option
#: ../src/cavern.c:123
#: n:162
msgid "set location for output files"
msgstr ""

#. TRANSLATORS: --help output for cavern --quiet option
#: ../src/cavern.c:124
#: n:163
msgid "only show brief summary (-qq for errors only)"
msgstr ""

#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
#: ../src/cavern.c:125
#: n:164
msgid "do not create .err file"
msgstr ""

#. TRANSLATORS: --help output for cavern --warnings-are-errors option
#: ../src/cavern.c:126
#: n:165
msgid "turn warnings into errors"
msgstr ""

#. TRANSLATORS: --help output for cavern --log option
#: ../src/cavern.c:127
#: n:170
msgid "log output to .log file"
msgstr ""

#. TRANSLATORS: --help output for cavern --3d-version option
#: ../src/cavern.c:128
#: n:171
msgid "specify the 3d file format version to output"
msgstr ""

#. TRANSLATORS: --help output for sorterr --horizontal option
#: ../src/sorterr.c:52
#: n:179
msgid "sort by horizontal error factor"
msgstr ""

#. TRANSLATORS: --help output for sorterr --vertical option
#: ../src/sorterr.c:53
#: n:180
msgid "sort by vertical error factor"
msgstr ""

#. TRANSLATORS: --help output for sorterr --percentage option
#: ../src/sorterr.c:54
#: n:181
msgid "sort by percentage error"
msgstr ""

#. TRANSLATORS: --help output for sorterr --per-leg option
#: ../src/sorterr.c:55
#: n:182
msgid "sort by error per leg"
msgstr ""

#. TRANSLATORS: --help output for sorterr --replace option
#: ../src/sorterr.c:56
#: n:183
msgid "replace .err file with resorted version"
msgstr ""

#. TRANSLATORS: --help output for dump3d --rewind option
#: ../src/dump3d.c:51
#: n:204
msgid "rewind file and read it a second time"
msgstr ""

#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s meaningless to say
#. your tape is marked in "0 feet" (but you might measure distance by counting
#. knots on a diving line, and tie them every "2 feet").
#: ../src/commands.c:1280
#: n:200
msgid "*UNITS factor must be non-zero"
msgstr "Factorul *UNITS trebuie sa fie diferit de zero"

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:740
#: n:201
msgid "&Screenshot…"
msgstr "&Captura ecran…"

#: ../src/mainfrm.cc:1327
#: n:202
#, c-format
msgid "No survey data in 3d file “%s”"
msgstr "Nu exista date de topografie in fisierul 3d “%s”"

#: ../src/gfxcore.cc:650
#: n:203
msgid "Facing"
msgstr "Directie"

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:69
#: n:205
#, c-format
msgid "About %s"
msgstr "Despre %s"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#.
#. File->Open dialog:
#: ../src/mainfrm.cc:1776
#: n:206
#, fuzzy
msgid "Select a survey file to view"
msgstr "Selectati un fisier 3d pentru vizualizare"

#: ../src/mainfrm.cc:1768
#: n:207
msgid "Survex 3d files"
msgstr "Fisier Survex 3d"

#: ../src/mainfrm.cc:1773
#: ../src/mainfrm.cc:2168
#: n:208
msgid "All files"
msgstr "Toate fisierele"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:1767
#: n:229
msgid "All survey files"
msgstr ""

#: ../src/mainfrm.cc:1769
#: n:329
msgid "Survex svx files"
msgstr ""

#: ../src/mainfrm.cc:1771
#: n:330
msgid "Compass DAT and MAK files"
msgstr ""

#: ../src/printwx.cc:397
#: n:96
msgid "DXF files|*.dxf|SVG files|*.svg|Sketch files|*.sk|EPS files|*.eps|Compass PLT for use with Carto|*.plt|HPGL for plotters|*.hpgl"
msgstr ""

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#.
#. This string is used in the about box (summarising the purpose of aven).
#: ../src/aboutdlg.cc:87
#: n:209
msgid "Survey visualisation tool"
msgstr "Utilitar pentru vizualizarea topografiei"

#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any accelerator key.
#. The accelerators must be different within this group
#: ../src/mainfrm.cc:866
#: n:210
msgid "&File"
msgstr "&Fişier"

#: ../src/mainfrm.cc:867
#: n:211
msgid "&Rotation"
msgstr "&Rotire"

#: ../src/mainfrm.cc:868
#: n:212
msgid "&Orientation"
msgstr "&Orientare"

#: ../src/mainfrm.cc:869
#: n:213
msgid "&View"
msgstr "&Vizualizare"

#: ../src/mainfrm.cc:871
#: n:214
msgid "&Controls"
msgstr "&Controale"

#: ../src/mainfrm.cc:880
#: n:215
msgid "&Help"
msgstr "&Ajutor"

#: ../src/mainfrm.cc:873
#: n:216
msgid "&Presentation"
msgstr "&Prezentare"

#: ../src/aboutdlg.cc:98
#: n:219
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "Acest program este liber; îl puteţi redistribui şi/sau modifica în conformitate cu termenii Licenţei Publice Generale GNU aşa cum este publicată de Free Software Foundation; fie versiunea 2 Licenţei, fie (la latitudinea dumneavoastră) orice versiune ulterioară."

#. TRANSLATORS: Part of 3dtopos --help
#: ../src/3dtopos.c:85
#: n:217
msgid "3D_FILE [POS_FILE]"
msgstr ""

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:261
#: n:218
msgid "FILE1 FILE2 [THRESHOLD]"
msgstr ""

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:262
#: n:255
#, c-format
msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
msgstr ""

#. TRANSLATORS: Part of extend --help
#: ../src/extend.c:464
#: n:267
msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
msgstr ""

#. TRANSLATORS: Part of sorterr --help
#: ../src/sorterr.c:121
#: n:268
msgid "ERR_FILE [HOW_MANY]"
msgstr ""

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#.
#. Part of aven --help
#: ../src/aven.cc:109
#: ../src/aven.cc:136
#: n:269
msgid "[SURVEY_FILE]"
msgstr ""

#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any accelerator key.
#. The string "\t" separates the menu text and any accelerator key.
#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:734
#: n:220
msgid "&Open…\tCtrl+O"
msgstr "&Deschide…\tCtrl+O"

#. TRANSLATORS: Used in the "colour key" for "colour by date" if there are
#. surveys without date information.
#: ../src/gfxcore.cc:931
#: n:221
msgid "Undated"
msgstr "Fără dată"

#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
#. which aren’t part of a loop and so have no error information.
#: ../src/gfxcore.cc:953
#: n:290
msgid "Not in loop"
msgstr ""

#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
#: ../src/commands.c:1134
#: n:222
msgid "NEWLINE can’t be the first reading"
msgstr "NEWLINE nu poate fi prima lectura"

#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
#: ../src/commands.c:1169
#: n:223
msgid "NEWLINE can’t be the last reading"
msgstr "NEWLINE nu poate fi ultima lectura"

#. TRANSLATORS: error from "*data normal station tape compass clino"
#: ../src/commands.c:1191
#: n:224
msgid "Interleaved readings, but no NEWLINE"
msgstr "Lectura pe mai multe randuri, dar nici o NEWLINE"

#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
#: ../src/commands.c:1078
#: n:225
#, c-format
msgid "Reading “%s” must occur before NEWLINE"
msgstr "Lectura “%s” trebuie sa preceada NEWLINE"

#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
#: ../src/commands.c:1127
#: n:226
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "en:226 NEWLINE poate fi precedat doar de STATION, DEPTH, si COUNT"

#: ../src/commands.c:1314
#: n:227
msgid "Can’t calibrate angular and length quantities together"
msgstr "Nu pot calibra unghiurile verticale si lungimile in acelasi timp"

#: ../src/commands.c:564
#: n:397
msgid "Bad *alias command"
msgstr ""

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
#. height values).
#~ msgid "Select a terrain file to view"
#~ msgstr "Selectati un model digital al terenului pentru vizualizare"

#~ msgid "Terrain files"
#~ msgstr "Model digital al terenului"

#. TRANSLATORS: %s will be replaced by the application name ("Aven" currently)
#: ../src/log.cc:30
#: n:228
#, c-format
msgid "%s Error Log"
msgstr ""

#. TRANSLATORS: Used in the "Export" settings dialog
#: ../src/printwx.cc:363
#: n:230
msgid "&Export…"
msgstr "&Exporta…"

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
#. Tickable menu item which toggles auto rotation
#: ../src/mainfrm.cc:753
#: n:231
msgid "Au&to-Rotate\tSpace"
msgstr "&Auto-rotatie\tSpace"

#: ../src/mainfrm.cc:755
#: n:232
msgid "Speed &Up"
msgstr "A&ccelereaza rotatia"

#: ../src/mainfrm.cc:756
#: n:233
msgid "Slow &Down"
msgstr "&Incetineste rotatia"

#: ../src/mainfrm.cc:758
#: n:234
msgid "&Reverse Direction"
msgstr "&Schimba directia"

#: ../src/mainfrm.cc:760
#: n:235
msgid "Step Once &Anticlockwise"
msgstr "Un pas in sens a&ntiorar"

#: ../src/mainfrm.cc:761
#: n:236
msgid "Step Once &Clockwise"
msgstr "Un pas in sens o&rar"

#. TRANSLATORS: View *looking* North
#: ../src/gfxcore.cc:2994
#: ../src/mainfrm.cc:764
#: n:240
msgid "View &North"
msgstr "Vizualizare spre &Nord"

#. TRANSLATORS: View *looking* East
#: ../src/gfxcore.cc:2995
#: ../src/mainfrm.cc:765
#: n:241
msgid "View &East"
msgstr "Vizualizare spre &Est"

#. TRANSLATORS: View *looking* South
#: ../src/gfxcore.cc:2996
#: ../src/mainfrm.cc:766
#: n:242
msgid "View &South"
msgstr "Vizualizare spre &Sud"

#. TRANSLATORS: View *looking* West
#: ../src/gfxcore.cc:2997
#: ../src/mainfrm.cc:767
#: n:243
msgid "View &West"
msgstr "Vizualizare spre &Vest"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:769
#: n:244
msgid "Shift Survey &Left"
msgstr "Mutati topografia spre S&tanga"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:770
#: n:245
msgid "Shift Survey &Right"
msgstr "Mutati topografia spre &Dreapta"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:771
#: n:246
msgid "Shift Survey &Up"
msgstr "Mutati topografia In s&us"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:772
#: n:247
msgid "Shift Survey &Down"
msgstr "Mutati topografia In &jos"

#: ../src/gfxcore.cc:3009
#: ../src/mainfrm.cc:774
#: n:248
msgid "&Plan View"
msgstr "&Plan"

#: ../src/gfxcore.cc:3010
#: ../src/mainfrm.cc:775
#: n:249
msgid "Ele&vation"
msgstr "Profi&l"

#: ../src/mainfrm.cc:777
#: n:250
msgid "&Higher Viewpoint"
msgstr "Punct de vizualizare mai in&alt"

#: ../src/mainfrm.cc:778
#: n:251
msgid "L&ower Viewpoint"
msgstr "Punct de vizualizare mai j&os"

#: ../src/mainfrm.cc:781
#: n:252
msgid "&Zoom In\t]"
msgstr "&Mărire\t]"

#: ../src/mainfrm.cc:782
#: n:253
msgid "Zoo&m Out\t["
msgstr "Mi&cşorare\t["

#: ../src/mainfrm.cc:784
#: n:254
msgid "Restore De&fault View"
msgstr "&Restabiliti setarile initiale"

#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing" and
#. "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in the
#. "what to print" dialog.
#: ../src/printwx.cc:253
#: n:283
msgid "View"
msgstr "Vizualizare"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn’t a
#. good name for this but nothing better has yet come to mind!
#: ../src/printwx.cc:254
#: n:256
msgid "Elements"
msgstr "Elemente"

#: ../src/printwx.cc:273
#: ../src/printwx.cc:504
#: n:257
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d pagini (%dx%d)"

#. TRANSLATORS: used in the scale drop down selector in the print dialog
#. the implicit meaning is "choose a suitable scale to fit the
#. plot on a single page", but we need something shorter
#: ../src/printwx.cc:260
#: ../src/printwx.cc:523
#: n:258
msgid "One page"
msgstr "O pagina"

#: ../src/mainfrm.cc:122
#: ../src/printwx.cc:280
#: n:259
msgid "Bearing"
msgstr "Azimut"

#: ../src/printwx.cc:316
#: n:260
msgid "Station Names"
msgstr "Numele punctelor de statie"

#: ../src/printwx.cc:312
#: n:261
msgid "Crosses"
msgstr "Cruci"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:304
#: n:262
msgid "Underground Survey Legs"
msgstr "Portiuni subterane ale topografiei"

#: ../src/printwx.cc:320
#: n:393
msgid "Cross-sections"
msgstr ""

#: ../src/printwx.cc:325
#: n:394
msgid "Walls"
msgstr "Pereti"

#: ../src/printwx.cc:329
#: n:395
msgid "Passages"
msgstr "Pasaje"

#. TRANSLATORS: Used in the print dialog:
#: ../src/printwx.cc:285
#: n:263
msgid "Tilt angle"
msgstr "Unghi de inclinatie"

#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
#: ../src/printwx.cc:335
#: n:264
msgid "Page Borders"
msgstr "Limite pagina"

#. TRANSLATORS: used in the print dialog - controls drawing the box at the lower left
#. with survey name, view angles, etc
#: ../src/printwx.cc:341
#: n:265
msgid "Info Box"
msgstr "Caseta de informatii"

#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
#. (otherwise they’ll be skipped to save paper)
#: ../src/printwx.cc:339
#: n:266
msgid "Blank Pages"
msgstr "Document nou"

#. TRANSLATORS: Items in the "View" menu:
#: ../src/mainfrm.cc:798
#: n:270
msgid "Station &Names\tCtrl+N"
msgstr "&Numele punctelor de statie\tCtrl+N"

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:799
#: n:346
msgid "Passage &Tubes\tCtrl+T"
msgstr "Pasaje &Tub\tCtrl+T"

#: ../src/mainfrm.cc:800
#: n:271
msgid "&Crosses\tCtrl+X"
msgstr "&Cruci\tCtrl+X"

#: ../src/mainfrm.cc:801
#: n:297
msgid "&Grid\tCtrl+G"
msgstr "&Grid\tCtrl+G"

#: ../src/mainfrm.cc:802
#: n:318
msgid "&Bounding Box\tCtrl+B"
msgstr "Cadr&u\tCtrl+B"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:804
#: n:272
msgid "&Underground Survey Legs\tCtrl+L"
msgstr "&Portiuni subterane ale topografiei\tCtrl+L"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:805
#: n:291
msgid "&Surface Survey Legs\tCtrl+F"
msgstr "Portiuni de &suprafata ale topografiei\tCtrl+F"

#: ../src/mainfrm.cc:814
#: n:273
msgid "&Overlapping Names"
msgstr "Nu&me suprapuse"

#: ../src/gfxcore.cc:3032
#: ../src/mainfrm.cc:815
#: n:292
msgid "Colour by &Depth"
msgstr "Culori in functie de &adancime"

#: ../src/gfxcore.cc:3033
#: ../src/mainfrm.cc:816
#: n:293
msgid "Colour by D&ate"
msgstr "Culori in functie de &Data"

#: ../src/gfxcore.cc:3034
#: ../src/mainfrm.cc:817
#: n:289
#, fuzzy
msgid "Colour by E&rror"
msgstr "Colour b&y Error"

#: ../src/mainfrm.cc:819
#: n:294
msgid "Highlight &Entrances"
msgstr "Marcheaza &Intrarile"

#: ../src/mainfrm.cc:820
#: n:295
msgid "Highlight &Fixed Points"
msgstr "Marcheaza Punctele &Fixe"

#: ../src/mainfrm.cc:821
#: n:296
msgid "Highlight E&xported Points"
msgstr "Marcheaza Punctele &Exportate"

#: ../src/mainfrm.cc:826
#: n:237
msgid "&Perspective"
msgstr "Perspecti&va"

#: ../src/mainfrm.cc:828
#: n:238
msgid "Textured &Walls"
msgstr "Pereti cu te&xtura"

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
#. instead if it gives a better translation which most users will understand.
#: ../src/mainfrm.cc:829
#: n:239
msgid "Fade Distant Ob&jects"
msgstr "&Obiecte indepartate neclare"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:830
#: n:298
msgid "Smoot&hed Survey Legs"
msgstr "Elementele topografiei &rotunjite"

#: ../src/mainfrm.cc:836
#: ../src/mainfrm.cc:840
#: n:356
msgid "Full Screen &Mode\tF11"
msgstr "Afisare pe tot ecranu&l\tF11"

#: ../src/mainfrm.cc:854
#: n:274
msgid "&Compass"
msgstr "&Busola"

#: ../src/mainfrm.cc:855
#: n:275
msgid "C&linometer"
msgstr "&Clinometru"

#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/mainfrm.cc:856
#: n:276
msgid "Colour &Key"
msgstr ""

#: ../src/mainfrm.cc:857
#: n:277
msgid "&Scale Bar"
msgstr "Bara de control a &scarii"

#: ../src/mainfrm.cc:849
#: n:280
msgid "&Reverse Sense\tCtrl+R"
msgstr "&Schimbati sensul\tCtrl+R"

#: ../src/mainfrm.cc:824
#: ../src/mainfrm.cc:851
#: n:281
msgid "&Cancel Measuring Line\tEscape"
msgstr "&Anulati linia de masura\tEscape"

#: ../src/mainfrm.cc:858
#: n:299
msgid "&Indicators"
msgstr "I&ndicatorii"

#: ../src/z_getopt.c:695
#: ../src/z_getopt.c:707
#: n:300
#, c-format
msgid "%s: option “%s” is ambiguous\n"
msgstr "%s: opţiunea “%s” este ambiguă\n"

#: ../src/z_getopt.c:1023
#: ../src/z_getopt.c:1034
#: n:301
#, c-format
msgid "%s: option “-W %s” is ambiguous\n"
msgstr "%s: opţiunea “-W %s” este ambiguă\n"

#: ../src/z_getopt.c:751
#: ../src/z_getopt.c:755
#: n:302
#, c-format
msgid "%s: option “%c%s” doesn’t allow an argument\n"
msgstr "%s: opţiunea “%c%s” nu permite un argument\n"

#: ../src/z_getopt.c:740
#: ../src/z_getopt.c:743
#: n:303
#, c-format
msgid "%s: option “--%s” doesn’t allow an argument\n"
msgstr "%s: opţiunea “--%s” nu permite un argument\n"

#: ../src/z_getopt.c:1058
#: ../src/z_getopt.c:1069
#: n:304
#, c-format
msgid "%s: option “-W %s” doesn’t allow an argument\n"
msgstr "%s: opţiunea “-W %s” nu permite un argument\n"

#: ../src/z_getopt.c:790
#: ../src/z_getopt.c:802
#: ../src/z_getopt.c:1089
#: ../src/z_getopt.c:1101
#: n:305
#, c-format
msgid "%s: option “%s” requires an argument\n"
msgstr "%s: opţiunea “%s” necesită un argument\n"

#: ../src/z_getopt.c:960
#: ../src/z_getopt.c:971
#: ../src/z_getopt.c:1154
#: ../src/z_getopt.c:1166
#: n:306
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: opţiunea necesită un argument -- %c\n"

#: ../src/z_getopt.c:840
#: ../src/z_getopt.c:843
#: n:307
#, c-format
msgid "%s: unrecognized option “--%s”\n"
msgstr "%s: opţiune nerecunoscută “--%s”\n"

#: ../src/z_getopt.c:851
#: ../src/z_getopt.c:854
#: n:308
#, c-format
msgid "%s: unrecognized option “%c%s”\n"
msgstr "%s: opţiune nerecunoscută “%c%s”\n"

#: ../src/z_getopt.c:901
#: ../src/z_getopt.c:904
#: n:309
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: opţiune ilegală -- %c\n"

#: ../src/z_getopt.c:910
#: ../src/z_getopt.c:913
#: n:310
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: opţiune invalidă -- %c\n"

#: ../src/mainfrm.cc:787
#: n:311
msgid "&New Presentation"
msgstr "Prezentare &noua"

#: ../src/mainfrm.cc:788
#: n:312
msgid "&Open Presentation…"
msgstr "&Deschidere prezentare…"

#: ../src/mainfrm.cc:789
#: n:313
msgid "&Save Presentation"
msgstr "&Salvare Prezentare"

#: ../src/mainfrm.cc:790
#: n:314
msgid "Sa&ve Presentation As…"
msgstr "Salvare Prezentare &ca…"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:792
#: n:315
msgid "&Mark"
msgstr "&Marcheaza"

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:793
#: n:316
msgid "Pla&y"
msgstr "&Vizualizeaza"

#: ../src/mainfrm.cc:794
#: n:317
msgid "&Export as Movie…"
msgstr "&Exporta ca Animatie…"

#: ../src/mainfrm.cc:2245
#: n:331
msgid "Export Movie"
msgstr ""

#: ../src/mainfrm.cc:321
#: n:319
msgid "Select an output filename"
msgstr "Selectati un fisier pentru iesire"

#: ../src/mainfrm.cc:318
#: ../src/mainfrm.cc:2167
#: n:320
msgid "Aven presentations"
msgstr "Prezentare Aven"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1789
#: n:321
msgid "Save Screenshot"
msgstr "Salvare captura de ecran"

#: ../src/mainfrm.cc:2162
#: ../src/mainfrm.cc:2165
#: n:322
msgid "Select a presentation to open"
msgstr "Deschidere prezentare"

#: ../src/mainfrm.cc:400
#: n:323
#, c-format
msgid "Error in format of presentation file “%s”"
msgstr "Eroare in formatul fisierului prezentare “%s”"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave surveying package, so probably shouldn’t
#. be translated
#: ../src/mainfrm.cc:1770
#: n:324
msgid "Compass PLT files"
msgstr "Fisier Compass PLT"

#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying package, so don’t translate it.
#: ../src/mainfrm.cc:1772
#: n:325
msgid "CMAP XYZ files"
msgstr "Fisier CMAP XYZ"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1845
#: ../src/mainfrm.cc:2139
#: ../src/mainfrm.cc:2156
#: n:326
msgid "Modified Presentation"
msgstr "Prezentare Modificata"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1844
#: ../src/mainfrm.cc:2138
#: ../src/mainfrm.cc:2155
#: n:327
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "Prezentarea curenta a fost modificata. Se abandoneaza schimbarile nesalvate?"

#: ../src/mainfrm.cc:2456
#: ../src/mainfrm.cc:2465
#: n:328
msgid "No matches were found."
msgstr "Nici un element nua fost gasit."

#~ msgid "Open &Terrain…"
#~ msgstr "Deschidere &Model Teren…"

#~ msgid "Solid Su&rface"
#~ msgstr "Suprafata S&olida"

#. TRANSLATORS: number of stations found matching search
#, c-format
#~ msgid "%d found"
#~ msgstr "%d gasit"

#. TRANSLATORS: "Find stations" button tooltip
#: ../src/mainfrm.cc:930
#: n:332
msgid "Find"
msgstr "Găseşte"

#. TRANSLATORS: "Hide stations" button default tooltip
#: ../src/mainfrm.cc:931
#: ../src/mainfrm.cc:2497
#: n:333
msgid "Hide"
msgstr "Ascunde"

#. TRANSLATORS: "Hide stations" button tooltip when stations are found
#: ../src/mainfrm.cc:2458
#: n:334
#, c-format
msgid "Hide %d found stations"
msgstr ""

#: ../src/mainfrm.cc:205
#: ../src/mainfrm.cc:1915
#: ../src/mainfrm.cc:1919
#: ../src/mainfrm.cc:1984
#: ../src/mainfrm.cc:1986
#: ../src/mainfrm.cc:2029
#: ../src/mainfrm.cc:2033
#: n:335
msgid "Altitude"
msgstr "Altitudine"

#. TRANSLATORS: error if you try to drag multiple files to the aven window
#: ../src/mainfrm.cc:674
#: n:336
msgid "You may only view one 3d file at a time."
msgstr "Puteti vizualiza doar un fisier 3d odata"

#: ../src/mainfrm.cc:859
#: n:337
msgid "&Side Panel"
msgstr "&Cadran lateral"

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
#: ../src/mainfrm.cc:1914
#: ../src/mainfrm.cc:1917
#: ../src/mainfrm.cc:1940
#: ../src/mainfrm.cc:1942
#: ../src/mainfrm.cc:2028
#: ../src/mainfrm.cc:2031
#: n:338
msgid "%.2f E, %.2f N"
msgstr "%.2f E, %.2f N"

#. TRANSLATORS: Used in Aven:
#. From <stationname>
#. H: 123.45m V: 234.56m
#. Dist: 456.78m  Brg: 200
#: ../src/mainfrm.cc:1957
#: ../src/mainfrm.cc:1996
#: ../src/mainfrm.cc:2052
#: n:339
#, c-format
msgid "From %s"
msgstr "De la %s"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:2056
#: ../src/mainfrm.cc:2059
#: n:340
#, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "H %.2f%s, V %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:2072
#: ../src/mainfrm.cc:2076
#: n:341
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
msgstr "%s: %s, Dist %.2f%s, Azim %03d%s"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/gfxcore.cc:3023
#: ../src/gfxcore.cc:3038
#: ../src/mainfrm.cc:861
#: n:342
msgid "&Metric"
msgstr "&Metric"

#. TRANSLATORS: tickable menu item in View menu.
#. Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/gfxcore.cc:3000
#: ../src/gfxcore.cc:3013
#: ../src/mainfrm.cc:862
#: n:343
msgid "&Degrees"
msgstr "&Grade"

#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
#: ../src/gfxcore.cc:2999
#: n:387
msgid "&Hide Compass"
msgstr ""

#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
#: ../src/gfxcore.cc:3012
#: n:384
msgid "&Hide Clino"
msgstr ""

#. TRANSLATORS: Menu item which turns off the scale bar in aven.
#: ../src/gfxcore.cc:3022
#: n:385
msgid "&Hide scale bar"
msgstr ""

#. TRANSLATORS: Menu item which turns off the colour key.
#. The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/gfxcore.cc:3036
#: n:386
msgid "&Hide colour key"
msgstr ""

#. TRANSLATORS: degree symbol - probably should be translated to itself.
#: ../src/mainfrm.cc:1961
#: ../src/mainfrm.cc:2065
#: ../src/printwx.cc:704
#: ../src/printwx.cc:729
#: ../src/printwx.cc:733
#: ../src/printwx.cc:737
#: ../src/printwx.cc:744
#: n:344
msgid "°"
msgstr "°"

#. TRANSLATORS: alternative angle units (400 grad = 360 degrees = full circle).
#. Try to make this as short as sensibly possible.
#.
#. E.g. in Italian and Spanish we use "g.cent." rather than
#. "gradi quattrocentesimali"/"grados centesimales"
#: ../src/mainfrm.cc:1964
#: ../src/mainfrm.cc:2068
#: n:345
msgid "grad"
msgstr "gr.cent"

#: ../src/mainfrm.cc:844
#: n:347
#~ msgid "&Preferences…"
#~ msgstr "&Preferinte…"

#: n:348
#~ msgid "Draw passage walls"
#~ msgstr "Deseneaza peretii"

#: n:349
#~ msgid "Estimate LRUD readings based on heuristics"
#~ msgstr "Estimeaza masuratorile SDSJ pe baze euristice"

#: n:350
#~ msgid "Mark survey stations with crosses"
#~ msgstr "Marcheaza punctele de statie cu cruci"

#: n:351
#~ msgid "Highlight stations marked as entrances"
#~ msgstr "Evidentiaza punctele de statie selectate ca intrari"

#: n:352
#~ msgid "Highlight stations marked as fixed points"
#~ msgstr "Evidentiaza punctele de statie selectate ca puncte fixe"

#: n:353
#~ msgid "Highlight stations which are exported"
#~ msgstr "Evidentiaza punctele de statie care sunt exportate"

#: n:354
#~ msgid "Mark survey stations with their names"
#~ msgstr "Marcheaza punctele de statie cu numele lor"

#: n:355
#~ msgid "Allow names to overlap on the display (faster)"
#~ msgstr "Permite suprapunerea numelor (mai rapid)"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:357
#~ msgid "Display underground survey legs"
#~ msgstr "Afisare masuratori subterane"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:358
#~ msgid "Display surface survey legs"
#~ msgstr "Afisare masuratori de suprafata"

#: n:359
#~ msgid "Colour surface surveys by depth"
#~ msgstr "Colorare masuratori suprafata in functie de altitudine"

#: n:360
#~ msgid "Draw surface legs with dashed lines"
#~ msgstr "Deseneaza masuratorile de suprafata cu linie intrerupta"

#: n:361
#~ msgid "Draw a grid"
#~ msgstr "Afiseaza un grid"

#: n:362
#~ msgid "metric units"
#~ msgstr "Metri"

#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
#. the USA (rather confusingly now that England has largely gone metric!)
#: n:363
#~ msgid "imperial units"
#~ msgstr "unitati masura englezesti"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: n:364
#~ msgid "degrees (°)"
#~ msgstr "grade sexagesimale (°)"

#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
#. full circle.
#: n:365
#~ msgid "grads"
#~ msgstr "grade zecimale"

#: n:366
#~ msgid "Display measurements in"
#~ msgstr "Afisare distante in"

#: n:367
#~ msgid "Display angles in"
#~ msgstr "Afisare unghiuri in"

#. TRANSLATORS: reverses the sense of the mouse controls
#: n:368
#~ msgid "Reverse the sense of the controls"
#~ msgstr "Schimba sensul butoanelor de control"

#: n:369
#~ msgid "Display scale bar"
#~ msgstr "Afiseaza scara"

#: n:370
#~ msgid "Display depth bar"
#~ msgstr "Afiseaza scara de adancime"

#: n:371
#~ msgid "Display compass"
#~ msgstr "Afiseaza busola"

#: n:372
#~ msgid "Display clinometer"
#~ msgstr "Afiseaza clinometrul"

#: n:373
#~ msgid "Display side panel"
#~ msgstr "Afiseaza casuta laterala"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:1968
#: ../src/mainfrm.cc:1971
#: n:374
#, fuzzy, c-format
msgid "%s: H %.2f%s, Brg %03d%s"
msgstr "%s: H %.2f%s, Azim %03d%s"

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:1999
#: ../src/mainfrm.cc:2002
#: n:375
#, fuzzy, c-format
msgid "%s: V %.2f%s"
msgstr "%s: V %.2f%s"

#. TRANSLATORS: labels for tabbed side panel
#. this is for the tab with the tree hierarchy of survey station names
#: ../src/mainfrm.cc:982
#: n:376
msgid "Surveys"
msgstr "Masuratori"

#: ../src/mainfrm.cc:983
#: n:377
msgid "Presentation"
msgstr "Prezentare"

#: ../src/mainfrm.cc:203
#: n:378
msgid "Easting"
msgstr "Est"

#: ../src/mainfrm.cc:204
#: n:379
msgid "Northing"
msgstr "Nord"

#: ../src/mainfrm.cc:737
#: n:380
msgid "&Print…\tCtrl+P"
msgstr "&Imprimare…\tCtrl+P"

#: ../src/mainfrm.cc:738
#: n:381
msgid "P&age Setup…"
msgstr "Initializare &pagina…"

#: ../src/mainfrm.cc:741
#: n:382
msgid "&Export as…"
msgstr "&Exporta ca…"

#. TRANSLATORS: Title of file dialog to choose name and type of exported file.
#: ../src/printwx.cc:396
#: n:401
msgid "Export as:"
msgstr ""

#. TRANSLATORS: Title of the export dialog
#: ../src/printwx.cc:210
#: n:383
msgid "Export"
msgstr "Exporta"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:134
#: n:390
msgid "System Information:"
msgstr "Informatii despre Sistem:"

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printwx.cc:420
#: n:398
msgid "Print Preview"
msgstr "Vizualizare inaintea imprimarii"

#. TRANSLATORS: Title of the print dialog
#: ../src/printwx.cc:210
#: n:399
msgid "Print"
msgstr "Imprimare"

#: ../src/printwx.cc:360
#: n:400
msgid "&Print…"
msgstr "&Imprimare…"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:308
#: n:403
msgid "Sur&face Survey Legs"
msgstr "&Portiuni de suprafata ale topografiei"

#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:95
#: n:404
msgid "Edit Waypoint"
msgstr ""

#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:132
#: n:278
msgid " (unused in perspective view)"
msgstr ""

#. TRANSLATORS: Field label in dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:137
#: n:279
msgid "Time: "
msgstr "Timp: "

#. TRANSLATORS: units+info after time field in dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:139
#: n:282
msgid " secs (0 = auto; *6 = 6 times auto)"
msgstr ""

#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
#. things in future).
#: ../src/aven.cc:221
#: n:405
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn’t available."
msgstr ""

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:158
#: n:500
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr "Mutat cu (%3.2f,%3.2f,%3.2f): %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:194
#: n:501
#, c-format
msgid "Added: %s"
msgstr "Adaugat: %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:216
#: n:502
#, c-format
msgid "Deleted: %s"
msgstr "Eliminat: %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this station, but we didn’t find it in the 3d file
#: ../src/extend.c:258
#: ../src/extend.c:275
#: ../src/extend.c:315
#: ../src/extend.c:355
#: ../src/extend.c:395
#: n:510
#, c-format
msgid "Failed to find station %s"
msgstr "Nu s-a gasit punctul de statie %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this leg, but we didn’t find it in the 3d file
#: ../src/extend.c:297
#: ../src/extend.c:337
#: ../src/extend.c:377
#: ../src/extend.c:417
#: n:511
#, c-format
msgid "Failed to find leg %s → %s"
msgstr "Nu s-a gasit masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#. "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:252
#: n:512
#, c-format
msgid "Starting from station %s"
msgstr "Incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:268
#: n:513
#, c-format
msgid "Extending to the left from station %s"
msgstr "Extindere spre stanga incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:308
#: n:514
#, c-format
msgid "Extending to the right from station %s"
msgstr "Extindere spre dreapta incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:287
#: n:515
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr "Extindere spre stanga incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:327
#: n:516
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr "Extindere spre drepta incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:388
#: n:517
#, c-format
msgid "Breaking survey loop at station %s"
msgstr "Topografia intrerupta incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:407
#: n:518
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr "Topografia intrerupta incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:348
#: n:519
#, c-format
msgid "Swapping extend direction from station %s"
msgstr "Schimbare directie desen incepind cu punctul de statie %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:367
#: n:520
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr "Schimbare directie desen incepind cu masuratoarea %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:535
#: n:521
#, c-format
msgid "Applying specfile: “%s”"
msgstr "Aplicare fisier de specificatii: “%s”"

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:595
#: n:522
#, c-format
msgid "Writing %s…"
msgstr "Scriere %s…"

#: ../src/findentrances.cc:100
#: n:287
#, c-format
msgid "Failed to initialise input coordinate system “%s”"
msgstr ""

#: ../src/findentrances.cc:103
#: n:288
#, c-format
msgid "Failed to initialise output coordinate system “%s”"
msgstr ""

#: ../src/findentrances.cc:155
#: n:388
msgid "-d PROJ_DATUM 3D_FILE"
msgstr ""

#. TRANSLATORS: The findentrances utility uses the PROJ library to do
#. coordinate transformations (https://trac.osgeo.org/proj/) - you
#. pass findentrances a string to tell PROJ what the input datum is.
#: ../src/findentrances.cc:146
#: n:389
msgid "input datum as string to pass to PROJ"
msgstr ""

#: ../src/readval.c:338
#: n:392
msgid "Separator in survey name"
msgstr ""

#: ../src/readval.c:124
#: ../src/readval.c:139
#: ../src/readval.c:156
#: n:3
msgid "Can't have a leg between two anonymous stations"
msgstr ""

#: ../src/dump3d.c:52
#: n:396
msgid "show survey date information (if present)"
msgstr ""

#: ../src/mainfrm.cc:811
#: n:406
#, fuzzy
msgid "Spla&y Legs"
msgstr "Splay Legs (&z)"

#: ../src/mainfrm.cc:808
#: n:407
msgid "&Hide"
msgstr ""

#: ../src/mainfrm.cc:809
#: n:408
msgid "&Fade"
msgstr ""

#: ../src/mainfrm.cc:810
#: n:409
msgid "&Show"
msgstr ""