Context Navigation

id.po @ 29d1883f

Visit:

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data

Last change on this file since 29d1883f was 29d1883f, checked in by Olly Betts <olly@…>, 10 years ago
lib/,src/commands.c: Fix typo in two recently added messages; drop message which is no longer used.
Property mode set to `100644`
File size: 66.6 KB

Line
1	msgid ""
2	msgstr ""
3	"Project-Id-Version: survex\n"
4	"Report-Msgid-Bugs-To: olly@survex.com\n"
5	"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6	"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
7	"Last-Translator: Arief Setiadi Wibowo <q_thrynx@yahoo.com>\n"
8	"Language-Team: Indonesian <id@li.org>\n"
9	"MIME-Version: 1.0\n"
10	"Content-Type: text/plain; charset=utf-8\n"
11	"Content-Transfer-Encoding: 8bit\n"
12	"Language: id\n"
13
14	#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
15	#. was trying to allocate space for.
16	#: ../src/message.c:85
17	#: n:1
18	#, c-format
19	msgid "Out of memory (couldn’t find %lu bytes)."
20	msgstr "Kehabisan memori (tidak dapat menemukan %lu byte)."
21
22	#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
23	#. greater" if that gives a more natural translation. It's
24	#. technically not quite right when there are parallel active release
25	#. series (e.g. Survex 1.0.40 was released after 1.2.0), but this
26	#. seems unlikely to confuse users.
27	#: ../src/commands.c:1953
28	#: n:2
29	#, c-format
30	msgid "Survex version %s or greater required to process this survey data."
31	msgstr "Survex versi %s atau selanjutnya dibutuhkan untuk memproses data survei ini."
32
33	#. TRANSLATORS: Indicates a warning message e.g.:
34	#. "spoon.svx:12: warning: *prefix is deprecated"
35	#: ../src/aven.cc:374
36	#: ../src/message.c:1245
37	#: n:4
38	msgid "warning"
39	msgstr "peringatan"
40
41	#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
42	#. by the line number in that file.
43	#: ../src/datain.c:107
44	#: n:5
45	#, c-format
46	msgid "In file included from %s:%u:\n"
47	msgstr ""
48
49	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
50	#. http://en.wikipedia.org/wiki/Deprecation
51	#: ../src/commands.c:560
52	#: n:6
53	msgid "prefix is deprecated - use begin and *end instead"
54	msgstr ""
55
56	#. TRANSLATORS: Here "station" is a survey station, not a train station.
57	#: ../src/readval.c:206
58	#: n:7
59	#, c-format
60	msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
61	msgstr "Karakter “%c” tidak diperkenankan di nama station (gunakan *SET NAMES untuk mengatur karakter yang diperkenankan)"
62
63	#: ../src/readval.c:382
64	#: n:8
65	msgid "Field may not be omitted"
66	msgstr ""
67
68	#: ../src/datain.c:1526
69	#: ../src/datain.c:1812
70	#: ../src/readval.c:384
71	#: ../src/readval.c:425
72	#: ../src/readval.c:455
73	#: n:9
74	#, c-format
75	msgid "Expecting numeric field, found “%s”"
76	msgstr "Mengharapkan isian numerik, menemukan “%s”"
77
78	#: ../src/commands.c:1609
79	#: n:10
80	#, c-format
81	msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
82	msgstr ""
83
84	#: ../src/debug.h:45
85	#: ../src/debug.h:47
86	#: ../src/matrix.c:352
87	#: ../src/message.c:238
88	#: n:11
89	msgid "Bug in program detected! Please report this to the authors"
90	msgstr "Ditemukan kutu pada program! Mohon laporkan ini pada penulis program"
91
92	#: ../src/commands.c:2068
93	#: ../src/extend.c:435
94	#: n:12
95	#, c-format
96	msgid "Unknown command “%s”"
97	msgstr "Perintah tidak dikenal “%s”"
98
99	#. TRANSLATORS: Here "station" is a survey station, not a train station.
100	#: ../src/netbits.c:407
101	#: n:13
102	#, c-format
103	msgid "Station “%s” equated to itself"
104	msgstr ""
105
106	#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
107	#. survey stations.
108	#: ../src/datain.c:1047
109	#: n:14
110	msgid "Compass reading may not be omitted except on plumbed legs"
111	msgstr ""
112
113	#: ../src/datain.c:282
114	#: ../src/extend.c:440
115	#: n:15
116	msgid "End of line not blank"
117	msgstr "Hentikan jika baris tidak kosong"
118
119	#: ../src/cavern.c:395
120	#: n:16
121	#, c-format
122	msgid "There were %d warning(s)."
123	msgstr "Terdapat peringatan %d"
124
125	#. TRANSLATORS: %s is replaced by the command we attempted to run.
126	#: ../src/cavernlog.cc:175
127	#: ../src/cavernlog.cc:233
128	#: n:17
129	#, c-format
130	msgid "Couldn’t run external command: “%s”"
131	msgstr "Gagal mengeksekusi “%s”"
132
133	#: ../src/datain.c:80
134	#: ../src/datain.c:88
135	#: ../src/datain.c:95
136	#: ../src/datain.c:766
137	#: ../src/extend.c:558
138	#: ../src/sorterr.c:80
139	#: ../src/sorterr.c:97
140	#: ../src/sorterr.c:240
141	#: n:18
142	msgid "Error reading file"
143	msgstr "Kesalahan membaca berkas"
144
145	#: ../src/message.c:1260
146	#: n:19
147	msgid "Too many errors - giving up"
148	msgstr "Terlalu banyak galat - menyerah"
149
150	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
151	#. http://en.wikipedia.org/wiki/Deprecation
152	#: ../src/commands.c:1488
153	#: n:20
154	msgid "DEFAULT is deprecated - use CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
155	msgstr ""
156
157	#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
158	#. (a weight on a string). So the problem here is that the leg is
159	#. vertical, so a compass reading has no meaning!
160	#: ../src/datain.c:1018
161	#: n:21
162	msgid "Compass reading given on plumbed leg"
163	msgstr ""
164
165	#: ../src/commands.c:648
166	#: n:22
167	msgid "END with no matching BEGIN in this file"
168	msgstr ""
169
170	#: ../src/datain.c:753
171	#: n:23
172	msgid "BEGIN with no matching END in this file"
173	msgstr ""
174
175	#: ../src/datain.c:399
176	#: ../src/img_hosted.c:30
177	#: ../src/printwx.cc:1527
178	#: n:24
179	#, c-format
180	msgid "Couldn’t open data file “%s”"
181	msgstr "Tidak dapat membuka berkas data “%s”"
182
183	#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
184	#. deprecated, so this error would be generated by:
185	#.
186	#. *equate \foo.7 1
187	#.
188	#. If you're unsure what "deprecated" means, see:
189	#. http://en.wikipedia.org/wiki/Deprecation
190	#: ../src/commands.c:463
191	#: ../src/readval.c:90
192	#: ../src/readval.c:94
193	#: n:25
194	msgid "ROOT is deprecated"
195	msgstr ""
196
197	#. TRANSLATORS: A station must be exported out of each level it is in, so
198	#. this would give "Station “\outer.inner.1” not exported from survey
199	#. “\outer”)":
200	#.
201	#. *equate entrance outer.inner.1
202	#. *begin outer
203	#. *begin inner
204	#. *export 1
205	#. 1 2 1.23 045 -6
206	#. *end inner
207	#. *end outer
208	#: ../src/commands.c:957
209	#: ../src/commands.c:959
210	#: ../src/listpos.c:104
211	#: ../src/readval.c:323
212	#: ../src/readval.c:326
213	#: n:26
214	#, c-format
215	msgid "Station “%s” not exported from survey “%s”"
216	msgstr ""
217
218	#. TRANSLATORS: This error occurs if there's an attempt to
219	#. export a station from a survey which doesn't actually exist.
220	#: ../src/listpos.c:109
221	#: n:286
222	#, c-format
223	msgid "Reference to station “%s” from non-existent survey “%s”"
224	msgstr ""
225
226	#: ../src/readval.c:297
227	#: n:27
228	#, c-format
229	msgid "“%s” can’t be both a station and a survey"
230	msgstr ""
231
232	#: ../src/extend.c:247
233	#: ../src/extend.c:266
234	#: ../src/extend.c:311
235	#: ../src/extend.c:353
236	#: ../src/extend.c:395
237	#: ../src/readval.c:202
238	#: n:28
239	msgid "Expecting station name"
240	msgstr ""
241
242	#. TRANSLATORS: e.g.
243	#.
244	#. *begin crawl
245	#. 1 2 9.45 234 -01
246	#. *end crawl
247	#. *begin crawl # <- warning here
248	#. 2 3 7.67 223 -03
249	#. *end crawl
250	#.
251	#. If you're unsure what "deprecated" means, see:
252	#. http://en.wikipedia.org/wiki/Deprecation
253	#: ../src/commands.c:537
254	#: n:29
255	msgid "Reentering an existing survey is deprecated"
256	msgstr ""
257
258	#: ../src/commands.c:538
259	#: n:30
260	msgid "Originally entered here"
261	msgstr "Aslinya masukkan disini"
262
263	#: ../src/commands.c:1884
264	#: n:31
265	#, c-format
266	msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
267	msgstr ""
268
269	#: ../src/commands.c:1891
270	#: n:32
271	#, c-format
272	msgid "Found “%s”, expecting “ON” or “OFF”"
273	msgstr "Menemukan “%s”, seharusnya “ON” atau “OFF”"
274
275	#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
276	#. translated.
277	#: ../src/commands.c:921
278	#: n:33
279	msgid "Only one station in EQUATE command"
280	msgstr ""
281
282	#: ../src/commands.c:410
283	#: n:34
284	#, c-format
285	msgid "Unknown quantity “%s”"
286	msgstr "Kuantitas tidak diketahui “%s”"
287
288	#: ../src/commands.c:327
289	#: n:35
290	#, c-format
291	msgid "Unknown units “%s”"
292	msgstr "Unit tidak diketahui “%s”"
293
294	#: ../src/commands.c:1770
295	#: ../src/commands.c:1791
296	#: ../src/commands.c:1819
297	#: ../src/commands.c:1844
298	#: n:434
299	msgid "Unknown coordinate system"
300	msgstr ""
301
302	#: ../src/commands.c:1806
303	#: ../src/commands.c:1824
304	#: n:435
305	msgid "Coordinate system unsuitable for output"
306	msgstr ""
307
308	#: ../src/commands.c:824
309	#: n:436
310	msgid "Failed to convert coordinates"
311	msgstr ""
312
313	#: ../src/commands.c:829
314	#: n:437
315	msgid "The input projection is set but the output projection isn't"
316	msgstr ""
317
318	#: ../src/commands.c:831
319	#: n:438
320	msgid "The output projection is set but the input projection isn't"
321	msgstr ""
322
323	#: ../src/commands.c:731
324	#: n:439
325	msgid "Coordinates can't be omitted when coordinate system has been specified"
326	msgstr ""
327
328	#. TRANSLATORS: Used when a BEGIN command has no survey, but the
329	#. END command does, e.g.:
330	#.
331	#. *begin
332	#. 1 2 10.00 178 -01
333	#. *end entrance <--[Message given here]
334	#: ../src/commands.c:670
335	#: n:36
336	msgid "Matching BEGIN command has no survey name"
337	msgstr ""
338
339	#. TRANSLATORS: Note: In English you talk about the units of a single
340	#. measurement, but the correct term in other languages may be singular.
341	#: ../src/commands.c:340
342	#: n:37
343	#, c-format
344	msgid "Invalid units “%s” for quantity"
345	msgstr ""
346
347	#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all
348	#. errors there take a filename parameter - we don’t really want it here,
349	#. so lose it with "%.0s" (which should display 0 characters from the
350	#. filename) FIXME: sort out this
351	#: ../src/img_hosted.c:35
352	#: n:38
353	msgid "Out of memory %.0s"
354	msgstr ""
355
356	#: ../src/commands.c:403
357	#: n:39
358	#, c-format
359	msgid "Unknown instrument “%s”"
360	msgstr "Instrumen tidak diketahui “%s”"
361
362	#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
363	#. translate
364	#: ../src/commands.c:1456
365	#: n:40
366	msgid "Scale factor must be 1.0 for DECLINATION"
367	msgstr ""
368
369	#. TRANSLATORS: If the scale factor for an instrument is zero, then any
370	#. reading would be mapped to zero, which doesn't make sense.
371	#: ../src/commands.c:1462
372	#: n:391
373	msgid "Scale factor must be non-zero"
374	msgstr ""
375
376	#: ../src/commands.c:1507
377	#: n:41
378	#, c-format
379	msgid "Unknown setting “%s”"
380	msgstr "Pengaturan tidak dikenal “%s”"
381
382	#: ../src/commands.c:448
383	#: n:42
384	#, c-format
385	msgid "Unknown character class “%s”"
386	msgstr "Klas karakter tidak dikenal “%s”"
387
388	#: ../src/extend.c:604
389	#: ../src/netskel.c:90
390	#: n:43
391	msgid "No survey data"
392	msgstr "Tidak ada data survei"
393
394	#: ../src/filename.c:52
395	#: ../src/img_hosted.c:36
396	#: n:44
397	#, c-format
398	msgid "Filename “%s” refers to directory"
399	msgstr ""
400
401	#: ../src/netartic.c:384
402	#: n:45
403	msgid "Survey not all connected to fixed stations"
404	msgstr ""
405
406	#: ../src/commands.c:854
407	#: ../src/datain.c:679
408	#: n:46
409	msgid "Station already fixed or equated to a fixed point"
410	msgstr ""
411
412	#: ../src/cavern.c:298
413	#: ../src/filename.c:55
414	#: ../src/img_hosted.c:37
415	#: n:47
416	#, c-format
417	msgid "Failed to open output file “%s”"
418	msgstr "Gagal membuka “%s” untuk menulis"
419
420	#: ../src/commands.c:1562
421	#: n:48
422	msgid "Standard deviation must be positive"
423	msgstr ""
424
425	#. TRANSLATORS: as in: Usage: cavern …
426	#: ../src/cmdline.c:168
427	#: n:49
428	msgid "Usage"
429	msgstr "Penggunaan"
430
431	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
432	#. "survey stations".
433	#.
434	#. %s is replaced by the name of the station.
435	#: ../src/netbits.c:333
436	#: n:50
437	#, c-format
438	msgid "Survey leg with same station (“%s”) at both ends - typing error?"
439	msgstr ""
440
441	#. TRANSLATORS: Degrees are the angular measurement where there are
442	#. 360 in a full circle.
443	#: ../src/datain.c:965
444	#: ../src/datain.c:973
445	#: ../src/datain.c:985
446	#: n:51
447	msgid "Clino reading over 90 degrees (absolute value)"
448	msgstr ""
449
450	#: ../src/netbits.c:422
451	#: n:52
452	#, c-format
453	msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
454	msgstr ""
455
456	#. TRANSLATORS: "equal" as in:
457	#.
458	#. *fix a 1 2 3
459	#. *fix b 1 2 3
460	#. *equate a b
461	#: ../src/netbits.c:433
462	#: n:53
463	#, c-format
464	msgid "Equating two equal fixed points: “%s” and “%s”"
465	msgstr ""
466
467	#. TRANSLATORS: " *fix a " gives this message:
468	#: ../src/commands.c:741
469	#: n:54
470	msgid "FIX command with no coordinates - fixing at (0,0,0)"
471	msgstr ""
472
473	#. TRANSLATORS: fix a 1 2 3 / fix a 1 2 3
474	#: ../src/commands.c:858
475	#: ../src/datain.c:681
476	#: n:55
477	msgid "Station already fixed at the same coordinates"
478	msgstr ""
479
480	#. TRANSLATORS: Emitted after second and subsequent "FIX command with
481	#. no coordinates - fixing at (0,0,0)" warnings.
482	#: ../src/commands.c:749
483	#: n:441
484	#, c-format
485	msgid "Already had FIX command with no coordinates for station “%s”"
486	msgstr ""
487
488	#: ../src/commands.c:1662
489	#: n:442
490	#, c-format
491	msgid "Station “%s” fixed before CS command first used"
492	msgstr ""
493
494	#. TRANSLATORS: The EXPORT command is only valid just after BEGIN
495	#. <SURVEY>, so this would generate this error:
496	#.
497	#. *begin fred
498	#. 1 2 1.23 045 -6
499	#. *export 2
500	#. *end fred
501	#: ../src/commands.c:2082
502	#: n:57
503	msgid "EXPORT must immediately follow “BEGIN <SURVEY>”"
504	msgstr ""
505
506	#: ../src/readval.c:512
507	#: n:58
508	msgid "Invalid year (< 1900 or > 2078)"
509	msgstr ""
510
511	#. TRANSLATORS: Suspicious means something like 410 degrees or -20
512	#. degrees
513	#: ../src/datain.c:863
514	#: ../src/datain.c:872
515	#: n:59
516	msgid "Suspicious compass reading"
517	msgstr ""
518
519	#: ../src/datain.c:1502
520	#: n:60
521	msgid "Negative tape reading"
522	msgstr ""
523
524	#: ../src/commands.c:736
525	#: n:61
526	msgid "Same station fixed twice with no coordinates"
527	msgstr ""
528
529	#. TRANSLATORS: This means that the data fed in said this.
530	#.
531	#. It could be a gross error (e.g. the decimal point is missing from the
532	#. depth gauge reading) or it could just be due to random error on a near
533	#. vertical leg
534	#: ../src/datain.c:1201
535	#: n:62
536	msgid "Tape reading is less than change in depth"
537	msgstr ""
538
539	#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
540	#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
541	#. neither style nor reading is a keyword in the program This error
542	#. complains about a depth gauge reading in normal style, for example
543	#: ../src/commands.c:1178
544	#: n:63
545	#, c-format
546	msgid "Reading “%s” not allowed in data style “%s”"
547	msgstr ""
548
549	#. TRANSLATORS: i.e. not enough readings for the style.
550	#: ../src/commands.c:1363
551	#: n:64
552	#, c-format
553	msgid "Too few readings for data style “%s”"
554	msgstr ""
555
556	#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
557	#: ../src/commands.c:1138
558	#: n:65
559	#, c-format
560	msgid "Data style “%s” unknown"
561	msgstr ""
562
563	#. TRANSLATORS: Here "station" is a survey station, not a train station.
564	#.
565	#. Exporting a station twice gives this error:
566	#.
567	#. *begin example
568	#. *export 1
569	#. *export 1
570	#. 1 2 1.24 045 -6
571	#. *end example
572	#: ../src/commands.c:1008
573	#: n:66
574	#, c-format
575	msgid "Station “%s” already exported"
576	msgstr ""
577
578	#. TRANSLATORS: complains about a situation like trying to define
579	#. two from stations per leg
580	#: ../src/commands.c:1204
581	#: n:67
582	#, c-format
583	msgid "Duplicate reading “%s”"
584	msgstr ""
585
586	#: ../src/commands.c:885
587	#: n:68
588	#, c-format
589	msgid "FLAG “%s” unknown"
590	msgstr "FLAG “%s” tidak dikenali"
591
592	#: ../src/readval.c:469
593	#: n:69
594	msgid "Missing \""
595	msgstr "\" hilang"
596
597	#. TRANSLATORS: Here "station" is a survey station, not a train station.
598	#: ../src/listpos.c:119
599	#: n:70
600	#, c-format
601	msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
602	msgstr ""
603
604	#. TRANSLATORS: Here "station" is a survey station, not a train
605	#. station.
606	#: ../src/netartic.c:396
607	#: n:71
608	msgid "The following survey stations are not attached to a fixed point:"
609	msgstr ""
610
611	#: ../src/netskel.c:135
612	#: n:72
613	#, c-format
614	msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
615	msgstr ""
616
617	#. TRANSLATORS: fixed survey station that is not part of any survey
618	#: ../src/netskel.c:958
619	#: n:73
620	#, c-format
621	msgid "Unused fixed point “%s”"
622	msgstr ""
623
624	#: ../src/matrix.c:123
625	#: n:74
626	msgid "Network solved by reduction - no simultaneous equations to solve."
627	msgstr ""
628
629	#: ../src/matrix.c:134
630	#: n:75
631	#, c-format
632	msgid "Solving %d simultaneous equations"
633	msgstr ""
634
635	#: ../src/commands.c:1266
636	#: n:77
637	#, c-format
638	msgid "Reading “%s” duplicates previous reading(s)"
639	msgstr ""
640
641	#: ../src/matrix.c:132
642	#: n:78
643	msgid "Solving one equation"
644	msgstr ""
645
646	#: ../src/datain.c:936
647	#: ../src/datain.c:1190
648	#: ../src/datain.c:1383
649	#: n:79
650	msgid "Negative adjusted tape reading"
651	msgstr ""
652
653	#: ../src/commands.c:1990
654	#: ../src/commands.c:2010
655	#: n:80
656	msgid "Date is in the future!"
657	msgstr ""
658
659	#: ../src/commands.c:2014
660	#: n:81
661	msgid "End of date range is before the start"
662	msgstr ""
663
664	#: ../src/avenprcore.cc:125
665	#: n:82
666	#, c-format
667	msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
668	msgstr ""
669
670	#. TRANSLATORS: e.g. the user specifies a passage cross-section at
671	#. station "entrance.27", but there is no station "entrance.27" in
672	#. the centre-line.
673	#: ../src/netskel.c:1046
674	#: n:83
675	#, c-format
676	msgid "Cross section specified at non-existent station “%s”"
677	msgstr ""
678
679	#. TRANSLATORS: In data with backsights, the user has tried to give a
680	#. plumb for the foresight and a clino reading for the backsight, or
681	#. something similar.
682	#: ../src/datain.c:1002
683	#: ../src/datain.c:1026
684	#: n:84
685	msgid "CLINO and BACKCLINO readings must be of the same type"
686	msgstr ""
687
688	#: ../src/avenprcore.cc:120
689	#: n:85
690	#, c-format
691	msgid "Parameter “%s” missing in printer configuration file"
692	msgstr ""
693
694	#: ../src/readval.c:520
695	#: n:86
696	msgid "Invalid month"
697	msgstr ""
698
699	#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
700	#: ../src/readval.c:529
701	#: n:87
702	msgid "Invalid day of the month"
703	msgstr ""
704
705	#: ../src/cavern.c:247
706	#: n:88
707	#, c-format
708	msgid "3d file format versions %d to %d supported"
709	msgstr ""
710
711	#, c-format
712	#~ msgid "Error in format of font file “%s”"
713	#~ msgstr ""
714
715	#: ../src/readval.c:200
716	#: n:89
717	msgid "Expecting survey name"
718	msgstr ""
719
720	#. TRANSLATORS: Program will exit shortly after printing this
721	#: ../src/message.c:227
722	#: n:90
723	msgid "Abnormal termination"
724	msgstr ""
725
726	#: ../src/message.c:228
727	#: n:91
728	msgid "Arithmetic error"
729	msgstr ""
730
731	#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
732	#. opcodes -- corrupted program?
733	#: ../src/message.c:231
734	#: n:92
735	msgid "Illegal instruction"
736	msgstr "Instruksi tidak legal"
737
738	#: ../src/extend.c:553
739	#: ../src/mainfrm.cc:388
740	#: ../src/sorterr.c:146
741	#: n:93
742	#, c-format
743	msgid "Couldn’t open file “%s”"
744	msgstr "Tidak bisa membuka berkas “%s”"
745
746	#: ../src/printwx.cc:633
747	#: n:402
748	#, c-format
749	msgid "Couldn’t write file “%s”"
750	msgstr "Gagal membuka “%s” untuk menulis"
751
752	#: ../src/message.c:232
753	#: n:94
754	msgid "Bad memory access"
755	msgstr ""
756
757	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
758	#. http://en.wikipedia.org/wiki/Deprecation
759	#: ../src/commands.c:467
760	#: ../src/commands.c:540
761	#: ../src/commands.c:562
762	#: ../src/commands.c:1153
763	#: ../src/commands.c:1490
764	#: ../src/readval.c:96
765	#: n:95
766	msgid "Further uses of this deprecated feature will not be reported"
767	msgstr ""
768
769	#: ../src/message.c:233
770	#: n:97
771	msgid "Unknown signal received"
772	msgstr ""
773
774	#. TRANSLATORS: Degrees are the angular measurement where there are
775	#. 360 in a full circle.
776	#: ../src/datain.c:902
777	#: n:98
778	#, c-format
779	msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
780	msgstr ""
781
782	#. TRANSLATORS: Degrees are the angular measurement where
783	#. there are 360 in a full circle.
784	#: ../src/datain.c:1078
785	#: n:99
786	#, c-format
787	msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
788	msgstr ""
789
790	#: ../src/cad3d.c:661
791	#: n:100
792	msgid "do not generate station markers"
793	msgstr ""
794
795	#: ../src/cad3d.c:662
796	#: n:101
797	msgid "do not generate station labels"
798	msgstr ""
799
800	#: ../src/cad3d.c:663
801	#: n:102
802	msgid "do not generate survey legs"
803	msgstr ""
804
805	#: ../src/cad3d.c:667
806	#: n:103
807	msgid "produce an elevation view"
808	msgstr ""
809
810	#: ../src/commands.c:1150
811	#: n:104
812	#, c-format
813	msgid "“data %s %c …” is deprecated - use “data %s …” instead"
814	msgstr ""
815
816	#: ../src/extend.c:506
817	#: n:105
818	msgid "Reading in data - please wait…"
819	msgstr ""
820
821	#. TRANSLATORS: Perhaps the user tried to load a different type of file as
822	#. a Survex .3d file, or the .3d file was corrupted.
823	#: ../src/3dtopos.c:157
824	#: ../src/3dtopos.c:163
825	#: ../src/cad3d.c:905
826	#: ../src/cad3d.c:916
827	#: ../src/img_hosted.c:40
828	#: n:106
829	#, c-format
830	msgid "Bad 3d image file “%s”"
831	msgstr ""
832
833	#. TRANSLATORS: This is the date format string used to timestamp .3d
834	#. files internally. Probably best to keep it the same for all
835	#. translations.
836	#: ../src/img.c:43
837	#: ../src/mainfrm.cc:1409
838	#: n:107
839	#, c-format
840	msgid "%a,%Y.%m.%d %H:%M:%S %Z"
841	msgstr ""
842
843	#. TRANSLATORS: used a processed survey with no processing date/time info
844	#: ../src/mainfrm.cc:1402
845	#: n:108
846	msgid "Date and time not available."
847	msgstr ""
848
849	#: ../src/img_hosted.c:41
850	#: n:109
851	#, c-format
852	msgid "Error reading from file “%s”"
853	msgstr "Kesalahan membaca berkas “%s”"
854
855	#: ../src/filename.c:79
856	#: ../src/img_hosted.c:42
857	#: ../src/mainfrm.cc:346
858	#: ../src/mainfrm.cc:1917
859	#: n:110
860	#, c-format
861	msgid "Error writing to file “%s”"
862	msgstr "Galat saat menulis ke berkas “%s”"
863
864	#: ../src/filename.c:82
865	#: n:111
866	msgid "Error writing to file"
867	msgstr "Galat saat menulis ke berkas"
868
869	#: ../src/sorterr.c:81
870	#: ../src/sorterr.c:98
871	#: ../src/sorterr.c:170
872	#: n:112
873	msgid "Couldn’t parse .err file"
874	msgstr ""
875
876	#: ../src/cavern.c:390
877	#: n:113
878	#, c-format
879	msgid "There were %d warning(s) and %d error(s) - no output files produced."
880	msgstr ""
881
882	#: ../src/img_hosted.c:43
883	#: n:114
884	#, c-format
885	msgid "File “%s” has a newer format than this program can understand"
886	msgstr ""
887
888	#: ../src/printwx.cc:979
889	#: n:115
890	msgid "North"
891	msgstr "Utara"
892
893	#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
894	#: ../src/printwx.cc:1006
895	#: n:116
896	msgid "Elevation on"
897	msgstr ""
898
899	#: ../src/printwx.cc:437
900	#: n:117
901	msgid "P&lan view"
902	msgstr ""
903
904	#: ../src/printwx.cc:439
905	#: n:285
906	msgid "&Elevation"
907	msgstr ""
908
909	#: ../src/gfxcore.cc:806
910	#: ../src/mainfrm.cc:128
911	#: n:118
912	msgid "Elevation"
913	msgstr ""
914
915	#. TRANSLATORS: Label used for "clino" in Aven when the view is
916	#. from directly above.
917	#: ../src/gfxcore.cc:718
918	#: n:432
919	msgid "Plan"
920	msgstr ""
921
922	#. TRANSLATORS: Label used for "clino" in Aven when the view is
923	#. from directly below.
924	#: ../src/gfxcore.cc:728
925	#: n:433
926	msgid "Kiwi Plan"
927	msgstr ""
928
929	#: ../src/cavern.c:352
930	#: n:120
931	msgid "Calculating statistics"
932	msgstr ""
933
934	#: ../src/readval.c:483
935	#: n:121
936	msgid "Expecting string field"
937	msgstr ""
938
939	#: ../src/cmdline.c:212
940	#: n:122
941	msgid "too few arguments"
942	msgstr "parameternya kurang"
943
944	#: ../src/cmdline.c:219
945	#: n:123
946	msgid "too many arguments"
947	msgstr "parameternya terlalu banyak"
948
949	#: ../src/cmdline.c:178
950	#: ../src/cmdline.c:181
951	#: ../src/cmdline.c:185
952	#: n:124
953	msgid "FILE"
954	msgstr "BERKAS"
955
956	#. TRANSLATORS: In French, Eric chose to use the terminology used by
957	#. toporobot: "sequence" for the English "traverse", which makes sense
958	#. (although toporobot actually uses this term to mean something more
959	#. specific). Feel free to follow this lead if you can't think of a better
960	#. term - these messages mostly indicate how processing is progressing.
961	#.
962	#. A trailing traverse is a dead end back to a junction.
963	#: ../src/netskel.c:177
964	#: n:125
965	msgid "Removing trailing traverses"
966	msgstr ""
967
968	#. TRANSLATORS: In French, Eric chose to use the terminology used by
969	#. toporobot: "sequence" for the English "traverse", which makes sense
970	#. (although toporobot actually uses this term to mean something more
971	#. specific). Feel free to follow this lead if you can't think of a better
972	#. term - these messages mostly indicate how processing is progressing.
973	#: ../src/netskel.c:236
974	#: n:126
975	msgid "Concatenating traverses"
976	msgstr ""
977
978	#. TRANSLATORS: In French, Eric chose to use the terminology used by
979	#. toporobot: "sequence" for the English "traverse", which makes sense
980	#. (although toporobot actually uses this term to mean something more
981	#. specific). Feel free to follow this lead if you can't think of a better
982	#. term - these messages mostly indicate how processing is progressing.
983	#: ../src/netskel.c:434
984	#: n:127
985	msgid "Calculating traverses"
986	msgstr ""
987
988	#. TRANSLATORS: In French, Eric chose to use the terminology used by
989	#. toporobot: "sequence" for the English "traverse", which makes sense
990	#. (although toporobot actually uses this term to mean something more
991	#. specific). Feel free to follow this lead if you can't think of a better
992	#. term - these messages mostly indicate how processing is progressing.
993	#.
994	#. A trailing traverse is a dead end back to a junction.
995	#: ../src/netskel.c:779
996	#: n:128
997	msgid "Calculating trailing traverses"
998	msgstr ""
999
1000	#: ../src/network.c:82
1001	#: n:129
1002	msgid "Simplifying network"
1003	msgstr ""
1004
1005	#: ../src/network.c:540
1006	#: n:130
1007	msgid "Calculating network"
1008	msgstr ""
1009
1010	#: ../src/datain.c:1492
1011	#: n:131
1012	#, c-format
1013	msgid "Found “%s”, expecting “F” or “B”"
1014	msgstr ""
1015
1016	#: ../src/cavern.c:451
1017	#: n:132
1018	#, c-format
1019	msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
1020	msgstr ""
1021
1022	#: ../src/cavern.c:454
1023	#: n:133
1024	#, c-format
1025	msgid "Total plan length of survey legs = %7.2fm"
1026	msgstr ""
1027
1028	#: ../src/cavern.c:457
1029	#: n:134
1030	#, c-format
1031	msgid "Total vertical length of survey legs = %7.2fm"
1032	msgstr ""
1033
1034	#. TRANSLATORS: numbers are altitudes of highest and lowest stations
1035	#: ../src/cavern.c:464
1036	#: n:135
1037	#, c-format
1038	msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1039	msgstr ""
1040
1041	#. TRANSLATORS: c.f. previous message
1042	#: ../src/cavern.c:466
1043	#: n:136
1044	#, c-format
1045	msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1046	msgstr ""
1047
1048	#. TRANSLATORS: c.f. previous two messages
1049	#: ../src/cavern.c:468
1050	#: n:137
1051	#, c-format
1052	msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1053	msgstr ""
1054
1055	#: ../src/cavern.c:436
1056	#: n:138
1057	msgid "There is 1 loop."
1058	msgstr ""
1059
1060	#: ../src/cavern.c:438
1061	#: n:139
1062	#, c-format
1063	msgid "There are %ld loops."
1064	msgstr ""
1065
1066	#: ../src/cavern.c:374
1067	#: n:140
1068	#, c-format
1069	msgid "CPU time used %5.2fs"
1070	msgstr ""
1071
1072	#: ../src/cavern.c:377
1073	#: n:141
1074	#, c-format
1075	msgid "Time used %5.2fs"
1076	msgstr ""
1077
1078	#: ../src/cavern.c:379
1079	#: n:142
1080	msgid "Time used unavailable"
1081	msgstr ""
1082
1083	#: ../src/cavern.c:382
1084	#: n:143
1085	#, c-format
1086	msgid "Time used %5.2fs (%5.2fs CPU time)"
1087	msgstr ""
1088
1089	#: ../src/cavern.c:386
1090	#: n:144
1091	msgid "Done."
1092	msgstr "Selesai."
1093
1094	#: ../src/netskel.c:744
1095	#: n:145
1096	#, c-format
1097	msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1098	msgstr ""
1099
1100	#: ../src/netskel.c:747
1101	#: n:146
1102	#, fuzzy, c-format
1103	msgid "Error %6.2f%%"
1104	msgstr "Kesalahan %6.2f%%"
1105
1106	#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1107	#. traverse has zero length, so error per metre is meaningless.
1108	#.
1109	#. There should be 4 spaces between "Error" and "N/A" so that it lines
1110	#. up with the numbers in the message above.
1111	#: ../src/netskel.c:754
1112	#: n:147
1113	#, fuzzy
1114	msgid "Error N/A"
1115	msgstr "Kesalahan N/A"
1116
1117	#: ../src/cad3d.c:664
1118	#: n:148
1119	#, c-format
1120	msgid "generate grid (default %sm)"
1121	msgstr ""
1122
1123	#: ../src/cad3d.c:665
1124	#: n:149
1125	#, c-format
1126	msgid "station labels text height (default %s)"
1127	msgstr ""
1128
1129	#: ../src/cad3d.c:666
1130	#: n:152
1131	#, c-format
1132	msgid "station marker size (default %s)"
1133	msgstr ""
1134
1135	#: ../src/cad3d.c:668
1136	#: n:155
1137	#, c-format
1138	msgid "factor to scale down by (default %s)"
1139	msgstr ""
1140
1141	#: ../src/cad3d.c:669
1142	#: n:156
1143	msgid "produce DXF output"
1144	msgstr ""
1145
1146	#: ../src/cad3d.c:670
1147	#: n:158
1148	msgid "produce Skencil output"
1149	msgstr ""
1150
1151	#: ../src/cad3d.c:671
1152	#: n:159
1153	msgid "produce Compass PLT output for Carto"
1154	msgstr ""
1155
1156	#: ../src/cad3d.c:672
1157	#: n:160
1158	msgid "produce SVG output"
1159	msgstr ""
1160
1161	#. TRANSLATORS: description of --help option
1162	#: ../src/cmdline.c:138
1163	#: n:150
1164	msgid "display this help and exit"
1165	msgstr ""
1166
1167	#. TRANSLATORS: description of --verbose option
1168	#: ../src/cmdline.c:141
1169	#: n:151
1170	msgid "output version information and exit"
1171	msgstr "keluarkan informasi versi dan keluar"
1172
1173	#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1174	#: ../src/cmdline.c:170
1175	#: n:153
1176	msgid "OPTION"
1177	msgstr "OPSI"
1178
1179	#: ../src/mainfrm.cc:132
1180	#: ../src/printwx.cc:385
1181	#: ../src/printwx.cc:1051
1182	#: ../src/printwx.cc:1100
1183	#: n:154
1184	msgid "Scale"
1185	msgstr ""
1186
1187	#: ../src/cmdline.c:194
1188	#: n:157
1189	#, c-format
1190	msgid "Try “%s --help” for more information.\n"
1191	msgstr ""
1192
1193	#: ../src/avenprcore.cc:269
1194	#: n:166
1195	#, c-format
1196	msgid "Page %d of %d"
1197	msgstr "Halaman %d dari %d"
1198
1199	#: ../src/avenprcore.cc:272
1200	#: ../src/printwx.cc:1533
1201	#: n:167
1202	#, fuzzy, c-format
1203	msgid "Survey “%s” Page %d (of %d) Processed on %s"
1204	msgstr "Survey “%s” Halaman %d dari %d Processed on %s"
1205
1206	#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1207	#. something like "123°". The bearing is up the page.
1208	#: ../src/printwx.cc:987
1209	#: n:168
1210	#, c-format
1211	msgid "Plan view, %s up page"
1212	msgstr ""
1213
1214	#. TRANSLATORS: This is used on printouts of elevations, with %s
1215	#. replaced by something like "123°". The bearing is the direction
1216	#. we’re looking.
1217	#: ../src/printwx.cc:1025
1218	#: n:169
1219	#, c-format
1220	msgid "Elevation facing %s"
1221	msgstr ""
1222
1223	#. TRANSLATORS: This is used on printouts of tilted elevations, with
1224	#. the first %s replaced by something like "123°", and the second by
1225	#. something like "-45°". The bearing is the direction we’re
1226	#. looking.
1227	#: ../src/printwx.cc:1034
1228	#: n:284
1229	#, c-format
1230	msgid "Elevation facing %s, tilted %s"
1231	msgstr ""
1232
1233	#. TRANSLATORS: This is used on printouts of extended elevations.
1234	#: ../src/printwx.cc:1043
1235	#: n:191
1236	msgid "Extended elevation"
1237	msgstr ""
1238
1239	#: ../src/cavern.c:422
1240	#: n:172
1241	msgid "Survey contains 1 survey station,"
1242	msgstr ""
1243
1244	#: ../src/cavern.c:424
1245	#: n:173
1246	#, c-format
1247	msgid "Survey contains %ld survey stations,"
1248	msgstr ""
1249
1250	#: ../src/cavern.c:428
1251	#: n:174
1252	msgid " joined by 1 leg."
1253	msgstr ""
1254
1255	#: ../src/cavern.c:430
1256	#: n:175
1257	#, c-format
1258	msgid " joined by %ld legs."
1259	msgstr ""
1260
1261	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1262	#: ../src/listpos.c:182
1263	#: n:176
1264	msgid "node"
1265	msgstr "node"
1266
1267	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1268	#: ../src/listpos.c:184
1269	#: n:177
1270	msgid "nodes"
1271	msgstr "node"
1272
1273	#. TRANSLATORS: "Connected component" in the graph theory sense - it
1274	#. means there are %ld bits of survey with no connections between them.
1275	#. This message is only used if there are more than 1.
1276	#: ../src/cavern.c:447
1277	#: n:178
1278	#, c-format
1279	msgid "Survey has %ld connected components."
1280	msgstr ""
1281
1282	#. TRANSLATORS: Label for button in aven’s cavern log window which
1283	#. causes the survey data to be reprocessed.
1284	#: ../src/cavernlog.cc:400
1285	#: ../src/cavernlog.cc:411
1286	#: n:184
1287	msgid "Reprocess"
1288	msgstr ""
1289
1290	#: ../src/cmdline.c:242
1291	#: ../src/cmdline.c:261
1292	#: n:185
1293	#, c-format
1294	msgid "numeric argument “%s” out of range"
1295	msgstr ""
1296
1297	#: ../src/cmdline.c:244
1298	#: n:186
1299	#, c-format
1300	msgid "argument “%s” not an integer"
1301	msgstr ""
1302
1303	#: ../src/cmdline.c:263
1304	#: n:187
1305	#, c-format
1306	msgid "argument “%s” not a number"
1307	msgstr ""
1308
1309	#: ../src/commands.c:900
1310	#: n:188
1311	msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1312	msgstr ""
1313
1314	#: ../src/commands.c:903
1315	#: n:189
1316	msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1317	msgstr ""
1318
1319	#: ../src/listpos.c:82
1320	#: n:190
1321	#, c-format
1322	msgid "Station “%s” referred to by entrance or export but never used"
1323	msgstr ""
1324
1325	#: ../src/commands.c:646
1326	#: n:192
1327	msgid "No matching BEGIN"
1328	msgstr ""
1329
1330	#. TRANSLATORS: BEGIN <survey> and END <survey> should have the
1331	#. same <survey> if it’s given at all
1332	#: ../src/commands.c:674
1333	#: n:193
1334	msgid "Survey name doesn’t match BEGIN"
1335	msgstr ""
1336
1337	#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1338	#. END command omits it, e.g.:
1339	#.
1340	#. *begin entrance
1341	#. 1 2 10.00 178 -01
1342	#. *end <--[Message given here]
1343	#: ../src/commands.c:683
1344	#: n:194
1345	msgid "Survey name omitted from END"
1346	msgstr ""
1347
1348	#. TRANSLATORS: Heading line for .pos file. Please try to ensure the “,”s
1349	#. (or at least the columns) are in the same place
1350	#: ../src/3dtopos.c:112
1351	#: n:195
1352	msgid "( Easting, Northing, Altitude )"
1353	msgstr ""
1354
1355	#. TRANSLATORS: bpp is "Bits Per Pixel"
1356	#: ../src/aboutdlg.cc:181
1357	#: n:196
1358	#, c-format
1359	msgid "Display Depth: %d bpp"
1360	msgstr ""
1361
1362	#. TRANSLATORS: appended to previous message if the display is colour
1363	#: ../src/aboutdlg.cc:183
1364	#: n:197
1365	msgid " (colour)"
1366	msgstr " (warna)"
1367
1368	#: ../src/readval.c:508
1369	#: ../src/readval.c:518
1370	#: ../src/readval.c:526
1371	#: n:198
1372	#, c-format
1373	msgid "Expecting date, found “%s”"
1374	msgstr ""
1375
1376	#. TRANSLATORS: --help output for --survey option.
1377	#.
1378	#. "this" has been added to English translation
1379	#: ../src/3dtopos.c:50
1380	#: ../src/aven.cc:66
1381	#: ../src/cad3d.c:660
1382	#: ../src/diffpos.c:57
1383	#: ../src/dump3d.c:49
1384	#: ../src/extend.c:458
1385	#: n:199
1386	msgid "only load the sub-survey with this prefix"
1387	msgstr ""
1388
1389	#. TRANSLATORS: --help output for aven --print option
1390	#: ../src/aven.cc:68
1391	#: n:119
1392	msgid "print and exit (requires a 3d file)"
1393	msgstr ""
1394
1395	#. TRANSLATORS: --help output for cavern --percentage option
1396	#: ../src/cavern.c:125
1397	#: n:161
1398	msgid "display percentage progress"
1399	msgstr ""
1400
1401	#. TRANSLATORS: --help output for cavern --output option
1402	#: ../src/cavern.c:127
1403	#: n:162
1404	msgid "set location for output files"
1405	msgstr ""
1406
1407	#. TRANSLATORS: --help output for cavern --quiet option
1408	#: ../src/cavern.c:129
1409	#: n:163
1410	msgid "only show brief summary (-qq for errors only)"
1411	msgstr ""
1412
1413	#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1414	#: ../src/cavern.c:131
1415	#: n:164
1416	msgid "do not create .err file"
1417	msgstr ""
1418
1419	#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1420	#: ../src/cavern.c:133
1421	#: n:165
1422	msgid "turn warnings into errors"
1423	msgstr ""
1424
1425	#. TRANSLATORS: --help output for cavern --log option
1426	#: ../src/cavern.c:135
1427	#: n:170
1428	msgid "log output to .log file"
1429	msgstr ""
1430
1431	#. TRANSLATORS: --help output for cavern --3d-version option
1432	#: ../src/cavern.c:137
1433	#: n:171
1434	msgid "specify the 3d file format version to output"
1435	msgstr ""
1436
1437	#. TRANSLATORS: --help output for sorterr --horizontal option
1438	#: ../src/sorterr.c:53
1439	#: n:179
1440	msgid "sort by horizontal error factor"
1441	msgstr ""
1442
1443	#. TRANSLATORS: --help output for sorterr --vertical option
1444	#: ../src/sorterr.c:55
1445	#: n:180
1446	msgid "sort by vertical error factor"
1447	msgstr ""
1448
1449	#. TRANSLATORS: --help output for sorterr --percentage option
1450	#: ../src/sorterr.c:57
1451	#: n:181
1452	msgid "sort by percentage error"
1453	msgstr ""
1454
1455	#. TRANSLATORS: --help output for sorterr --per-leg option
1456	#: ../src/sorterr.c:59
1457	#: n:182
1458	msgid "sort by error per leg"
1459	msgstr ""
1460
1461	#. TRANSLATORS: --help output for sorterr --replace option
1462	#: ../src/sorterr.c:61
1463	#: n:183
1464	msgid "replace .err file with resorted version"
1465	msgstr ""
1466
1467	#. TRANSLATORS: --help output for dump3d --rewind option
1468	#: ../src/dump3d.c:51
1469	#: n:204
1470	msgid "rewind file and read it a second time"
1471	msgstr ""
1472
1473	#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1474	#. meaningless to say your tape is marked in "0 feet" (but you might
1475	#. measure distance by counting knots on a diving line, and tie them
1476	#. every "2 feet").
1477	#: ../src/commands.c:1410
1478	#: n:200
1479	msgid "*UNITS factor must be non-zero"
1480	msgstr ""
1481
1482	#. TRANSLATORS: In the "File" menu
1483	#: ../src/mainfrm.cc:765
1484	#: n:201
1485	msgid "&Screenshot…"
1486	msgstr ""
1487
1488	#: ../src/mainfrm.cc:1419
1489	#: n:202
1490	#, c-format
1491	msgid "No survey data in 3d file “%s”"
1492	msgstr ""
1493
1494	#: ../src/gfxcore.cc:708
1495	#: n:203
1496	msgid "Facing"
1497	msgstr ""
1498
1499	#. TRANSLATORS: for the title of the About box
1500	#: ../src/aboutdlg.cc:70
1501	#: n:205
1502	#, c-format
1503	msgid "About %s"
1504	msgstr "Tetang %s"
1505
1506	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1507	#. - it should be translated to the terminology that cavers using the
1508	#. language would use.
1509	#.
1510	#. File->Open dialog:
1511	#: ../src/mainfrm.cc:1889
1512	#: n:206
1513	msgid "Select a survey file to view"
1514	msgstr ""
1515
1516	#: ../src/mainfrm.cc:1868
1517	#: n:207
1518	msgid "Survex 3d files"
1519	msgstr ""
1520
1521	#: ../src/mainfrm.cc:1881
1522	#: ../src/mainfrm.cc:2320
1523	#: ../src/printwx.cc:613
1524	#: n:208
1525	msgid "All files"
1526	msgstr "Semua berkas"
1527
1528	#. TRANSLATORS: Here "survey" is a "cave map" rather than
1529	#. list of questions - it should be translated to the
1530	#. terminology that cavers using the language would use.
1531	#: ../src/mainfrm.cc:1867
1532	#: n:229
1533	msgid "All survey files"
1534	msgstr ""
1535
1536	#: ../src/mainfrm.cc:1869
1537	#: n:329
1538	msgid "Survex svx files"
1539	msgstr "Berkas Survex svx"
1540
1541	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
1542	#. surveying package, so probably shouldn’t be translated
1543	#: ../src/mainfrm.cc:1877
1544	#: n:330
1545	msgid "Compass DAT and MAK files"
1546	msgstr ""
1547
1548	#: ../src/printwx.cc:271
1549	#: n:411
1550	msgid "DXF files"
1551	msgstr "Berkas DXF"
1552
1553	#: ../src/printwx.cc:272
1554	#: n:412
1555	msgid "EPS files"
1556	msgstr "Berkas EPS"
1557
1558	#: ../src/printwx.cc:273
1559	#: n:413
1560	msgid "GPX files"
1561	msgstr "Berkas GPX"
1562
1563	#: ../src/printwx.cc:274
1564	#: n:414
1565	msgid "HPGL for plotters"
1566	msgstr ""
1567
1568	#: ../src/printwx.cc:275
1569	#: n:415
1570	msgid "Compass PLT for use with Carto"
1571	msgstr ""
1572
1573	#: ../src/printwx.cc:276
1574	#: n:416
1575	msgid "Skencil files"
1576	msgstr "Berkas Skencil"
1577
1578	#: ../src/printwx.cc:277
1579	#: n:417
1580	msgid "SVG files"
1581	msgstr "Berkas SVG"
1582
1583	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1584	#. - it should be translated to the terminology that cavers using the
1585	#. language would use.
1586	#.
1587	#. This string is used in the about box (summarising the purpose of aven).
1588	#: ../src/aboutdlg.cc:94
1589	#: n:209
1590	msgid "Survey visualisation tool"
1591	msgstr ""
1592
1593	#. TRANSLATORS: Aven menu titles. An “&” goes before the letter of any
1594	#. accelerator key. The accelerators must be different within this group
1595	#: ../src/mainfrm.cc:924
1596	#: n:210
1597	msgid "&File"
1598	msgstr "&Berkas"
1599
1600	#: ../src/mainfrm.cc:925
1601	#: n:211
1602	msgid "&Rotation"
1603	msgstr ""
1604
1605	#: ../src/mainfrm.cc:926
1606	#: n:212
1607	msgid "&Orientation"
1608	msgstr "&Orientasi"
1609
1610	#: ../src/mainfrm.cc:927
1611	#: n:213
1612	msgid "&View"
1613	msgstr "&Tilik"
1614
1615	#: ../src/mainfrm.cc:929
1616	#: n:214
1617	msgid "&Controls"
1618	msgstr ""
1619
1620	#: ../src/mainfrm.cc:938
1621	#: n:215
1622	msgid "&Help"
1623	msgstr "Ba&ntuan"
1624
1625	#: ../src/mainfrm.cc:931
1626	#: n:216
1627	msgid "&Presentation"
1628	msgstr ""
1629
1630	#: ../src/aboutdlg.cc:105
1631	#: n:219
1632	msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1633	msgstr ""
1634
1635	#. TRANSLATORS: Part of 3dtopos --help
1636	#: ../src/3dtopos.c:86
1637	#: n:217
1638	msgid "3D_FILE [POS_FILE]"
1639	msgstr ""
1640
1641	#. TRANSLATORS: Part of diffpos --help
1642	#: ../src/diffpos.c:265
1643	#: n:218
1644	msgid "FILE1 FILE2 [THRESHOLD]"
1645	msgstr ""
1646
1647	#. TRANSLATORS: Part of diffpos --help
1648	#: ../src/diffpos.c:267
1649	#: n:255
1650	#, c-format
1651	msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1652	msgstr ""
1653
1654	#. TRANSLATORS: Part of extend --help
1655	#: ../src/extend.c:480
1656	#: n:267
1657	msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1658	msgstr ""
1659
1660	#. TRANSLATORS: Part of sorterr --help
1661	#: ../src/sorterr.c:127
1662	#: n:268
1663	msgid "ERR_FILE [HOW_MANY]"
1664	msgstr ""
1665
1666	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1667	#. - it should be translated to the terminology that cavers using the
1668	#. language would use.
1669	#.
1670	#. Part of aven --help
1671	#: ../src/aven.cc:115
1672	#: ../src/aven.cc:139
1673	#: n:269
1674	msgid "[SURVEY_FILE]"
1675	msgstr ""
1676
1677	#. TRANSLATORS: Aven menu items. An “&” goes before the letter of any
1678	#. accelerator key.
1679	#.
1680	#. The string "\t" separates the menu text and any accelerator key.
1681	#.
1682	#. "File" menu. The accelerators must be different within this group.
1683	#. c.f. 201, 380, 381.
1684	#: ../src/mainfrm.cc:758
1685	#: n:220
1686	msgid "&Open…\tCtrl+O"
1687	msgstr "&Buka…\tCtrl+O"
1688
1689	#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
1690	#. are surveys without date information.
1691	#: ../src/gfxcore.cc:1051
1692	#: n:221
1693	msgid "Undated"
1694	msgstr "Tidak bertanggal"
1695
1696	#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1697	#. which aren’t part of a loop and so have no error information.
1698	#: ../src/gfxcore.cc:1075
1699	#: n:290
1700	msgid "Not in loop"
1701	msgstr ""
1702
1703	#. TRANSLATORS: error from:
1704	#.
1705	#. *data normal newline from to tape compass clino
1706	#: ../src/commands.c:1254
1707	#: n:222
1708	msgid "NEWLINE can’t be the first reading"
1709	msgstr ""
1710
1711	#. TRANSLATORS: error from:
1712	#.
1713	#. *data normal from to tape compass clino newline
1714	#: ../src/commands.c:1292
1715	#: n:223
1716	msgid "NEWLINE can’t be the last reading"
1717	msgstr ""
1718
1719	#. TRANSLATORS: Error given by something like:
1720	#.
1721	#. *data normal station tape compass clino
1722	#.
1723	#. ("station" signifies interleaved data).
1724	#: ../src/commands.c:1315
1725	#: n:224
1726	msgid "Interleaved readings, but no NEWLINE"
1727	msgstr ""
1728
1729	#. TRANSLATORS: caused by e.g.
1730	#.
1731	#. *data diving station newline depth tape compass
1732	#.
1733	#. ("depth" needs to occur before "newline").
1734	#: ../src/commands.c:1191
1735	#: n:225
1736	#, c-format
1737	msgid "Reading “%s” must occur before NEWLINE"
1738	msgstr ""
1739
1740	#. TRANSLATORS: e.g.
1741	#.
1742	#. *data normal from to tape newline compass clino
1743	#: ../src/commands.c:1244
1744	#: n:226
1745	msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1746	msgstr ""
1747
1748	#: ../src/commands.c:1444
1749	#: n:227
1750	msgid "Can’t calibrate angular and length quantities together"
1751	msgstr ""
1752
1753	#: ../src/commands.c:589
1754	#: n:397
1755	msgid "Bad *alias command"
1756	msgstr ""
1757
1758	#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
1759	#. height values).
1760	#~ msgid "Select a terrain file to view"
1761	#~ msgstr ""
1762
1763	#~ msgid "Terrain files"
1764	#~ msgstr ""
1765
1766	#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1767	#. currently)
1768	#: ../src/log.cc:32
1769	#: n:228
1770	#, c-format
1771	msgid "%s Error Log"
1772	msgstr ""
1773
1774	#. TRANSLATORS: The text on the action button in the "Export" settings
1775	#. dialog
1776	#: ../src/printwx.cc:571
1777	#: n:230
1778	msgid "&Export…"
1779	msgstr "&Ekspor…"
1780
1781	#. TRANSLATORS: "Rotation" menu. The accelerators must be different within
1782	#. this group. Tickable menu item which toggles auto rotation
1783	#: ../src/mainfrm.cc:780
1784	#: n:231
1785	msgid "Au&to-Rotate\tSpace"
1786	msgstr ""
1787
1788	#: ../src/mainfrm.cc:782
1789	#: n:232
1790	msgid "Speed &Up"
1791	msgstr ""
1792
1793	#: ../src/mainfrm.cc:783
1794	#: n:233
1795	msgid "Slow &Down"
1796	msgstr ""
1797
1798	#: ../src/mainfrm.cc:785
1799	#: n:234
1800	msgid "&Reverse Direction"
1801	msgstr ""
1802
1803	#: ../src/mainfrm.cc:787
1804	#: n:235
1805	msgid "Step Once &Anticlockwise"
1806	msgstr ""
1807
1808	#: ../src/mainfrm.cc:788
1809	#: n:236
1810	msgid "Step Once &Clockwise"
1811	msgstr ""
1812
1813	#. TRANSLATORS: View looking North
1814	#: ../src/gfxcore.cc:3204
1815	#: ../src/mainfrm.cc:791
1816	#: n:240
1817	msgid "View &North"
1818	msgstr ""
1819
1820	#. TRANSLATORS: View looking East
1821	#: ../src/gfxcore.cc:3206
1822	#: ../src/mainfrm.cc:792
1823	#: n:241
1824	msgid "View &East"
1825	msgstr ""
1826
1827	#. TRANSLATORS: View looking South
1828	#: ../src/gfxcore.cc:3208
1829	#: ../src/mainfrm.cc:793
1830	#: n:242
1831	msgid "View &South"
1832	msgstr ""
1833
1834	#. TRANSLATORS: View looking West
1835	#: ../src/gfxcore.cc:3210
1836	#: ../src/mainfrm.cc:794
1837	#: n:243
1838	msgid "View &West"
1839	msgstr ""
1840
1841	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1842	#. - it should be translated to the terminology that cavers using the
1843	#. language would use.
1844	#: ../src/mainfrm.cc:799
1845	#: n:244
1846	msgid "Shift Survey &Left"
1847	msgstr ""
1848
1849	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1850	#. - it should be translated to the terminology that cavers using the
1851	#. language would use.
1852	#: ../src/mainfrm.cc:803
1853	#: n:245
1854	msgid "Shift Survey &Right"
1855	msgstr ""
1856
1857	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1858	#. - it should be translated to the terminology that cavers using the
1859	#. language would use.
1860	#: ../src/mainfrm.cc:807
1861	#: n:246
1862	msgid "Shift Survey &Up"
1863	msgstr ""
1864
1865	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1866	#. - it should be translated to the terminology that cavers using the
1867	#. language would use.
1868	#: ../src/mainfrm.cc:811
1869	#: n:247
1870	msgid "Shift Survey &Down"
1871	msgstr ""
1872
1873	#: ../src/gfxcore.cc:3224
1874	#: ../src/mainfrm.cc:813
1875	#: n:248
1876	msgid "&Plan View"
1877	msgstr ""
1878
1879	#: ../src/gfxcore.cc:3225
1880	#: ../src/mainfrm.cc:814
1881	#: n:249
1882	msgid "Ele&vation"
1883	msgstr ""
1884
1885	#: ../src/mainfrm.cc:816
1886	#: n:250
1887	msgid "&Higher Viewpoint"
1888	msgstr ""
1889
1890	#: ../src/mainfrm.cc:817
1891	#: n:251
1892	msgid "L&ower Viewpoint"
1893	msgstr ""
1894
1895	#: ../src/mainfrm.cc:820
1896	#: n:252
1897	msgid "&Zoom In\t]"
1898	msgstr "Per&besar\t]"
1899
1900	#: ../src/mainfrm.cc:821
1901	#: n:253
1902	msgid "Zoo&m Out\t["
1903	msgstr "Per&kecil\t["
1904
1905	#: ../src/mainfrm.cc:823
1906	#: n:254
1907	msgid "Restore De&fault View"
1908	msgstr ""
1909
1910	#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1911	#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1912	#. the "what to print/export" dialog.
1913	#: ../src/printwx.cc:349
1914	#: n:283
1915	msgid "View"
1916	msgstr "Tilik"
1917
1918	#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1919	#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1920	#. "Elements" isn’t a good name for this but nothing better has yet come to
1921	#. mind!
1922	#: ../src/printwx.cc:354
1923	#: n:256
1924	msgid "Elements"
1925	msgstr "Bagian"
1926
1927	#: ../src/printwx.cc:409
1928	#: ../src/printwx.cc:783
1929	#: n:257
1930	#, c-format
1931	msgid "%d pages (%dx%d)"
1932	msgstr "%d halaman (%dx%d)"
1933
1934	#. TRANSLATORS: used in the scale drop down selector in the print
1935	#. dialog the implicit meaning is "choose a suitable scale to fit
1936	#. the plot on a single page", but we need something shorter
1937	#: ../src/printwx.cc:391
1938	#: ../src/printwx.cc:802
1939	#: n:258
1940	msgid "One page"
1941	msgstr "Satu halaman"
1942
1943	#: ../src/mainfrm.cc:124
1944	#: ../src/printwx.cc:422
1945	#: n:259
1946	msgid "Bearing"
1947	msgstr ""
1948
1949	#: ../src/printwx.cc:461
1950	#: n:260
1951	msgid "Station Names"
1952	msgstr ""
1953
1954	#: ../src/printwx.cc:457
1955	#: n:261
1956	msgid "Crosses"
1957	msgstr ""
1958
1959	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1960	#. "survey stations".
1961	#: ../src/printwx.cc:447
1962	#: n:262
1963	msgid "Underground Survey Legs"
1964	msgstr ""
1965
1966	#: ../src/printwx.cc:477
1967	#: n:393
1968	msgid "Cross-sections"
1969	msgstr ""
1970
1971	#: ../src/printwx.cc:482
1972	#: n:394
1973	msgid "Walls"
1974	msgstr ""
1975
1976	#: ../src/printwx.cc:486
1977	#: n:395
1978	msgid "Passages"
1979	msgstr ""
1980
1981	#: ../src/printwx.cc:490
1982	#: n:421
1983	msgid "Origin in centre"
1984	msgstr ""
1985
1986	#: ../src/printwx.cc:494
1987	#: n:422
1988	msgid "Full coordinates"
1989	msgstr ""
1990
1991	#. TRANSLATORS: Used in the print dialog:
1992	#: ../src/printwx.cc:428
1993	#: n:263
1994	msgid "Tilt angle"
1995	msgstr ""
1996
1997	#. TRANSLATORS: used in the print dialog - controls drawing lines
1998	#. around each page
1999	#: ../src/printwx.cc:502
2000	#: n:264
2001	#, fuzzy
2002	msgid "Page Borders"
2003	msgstr "Batas"
2004
2005	#. TRANSLATORS: As in the legend on a map. Used in the print dialog -
2006	#. controls drawing the box at the lower left with survey name, view
2007	#. angles, etc
2008	#: ../src/printwx.cc:513
2009	#: n:265
2010	msgid "Legend"
2011	msgstr ""
2012
2013	#. TRANSLATORS: will be used in the print dialog - check this to print
2014	#. blank pages (otherwise they’ll be skipped to save paper)
2015	#: ../src/printwx.cc:508
2016	#: n:266
2017	msgid "Blank Pages"
2018	msgstr ""
2019
2020	#. TRANSLATORS: Items in the "View" menu:
2021	#: ../src/mainfrm.cc:840
2022	#: n:270
2023	msgid "Station &Names\tCtrl+N"
2024	msgstr ""
2025
2026	#. TRANSLATORS: Toggles drawing of 3D passages
2027	#: ../src/mainfrm.cc:842
2028	#: n:346
2029	msgid "Passage &Tubes\tCtrl+T"
2030	msgstr ""
2031
2032	#: ../src/mainfrm.cc:843
2033	#: n:271
2034	msgid "&Crosses\tCtrl+X"
2035	msgstr ""
2036
2037	#: ../src/mainfrm.cc:844
2038	#: n:297
2039	msgid "&Grid\tCtrl+G"
2040	msgstr ""
2041
2042	#: ../src/mainfrm.cc:845
2043	#: n:318
2044	msgid "&Bounding Box\tCtrl+B"
2045	msgstr ""
2046
2047	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2048	#. "survey stations".
2049	#: ../src/mainfrm.cc:849
2050	#: n:272
2051	msgid "&Underground Survey Legs\tCtrl+L"
2052	msgstr ""
2053
2054	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2055	#. "survey stations".
2056	#: ../src/mainfrm.cc:852
2057	#: n:291
2058	msgid "&Surface Survey Legs\tCtrl+F"
2059	msgstr ""
2060
2061	#: ../src/mainfrm.cc:861
2062	#: n:273
2063	msgid "&Overlapping Names"
2064	msgstr ""
2065
2066	#: ../src/gfxcore.cc:3259
2067	#: ../src/mainfrm.cc:862
2068	#: n:292
2069	msgid "Colour by &Depth"
2070	msgstr ""
2071
2072	#: ../src/gfxcore.cc:3260
2073	#: ../src/mainfrm.cc:863
2074	#: n:293
2075	msgid "Colour by D&ate"
2076	msgstr ""
2077
2078	#: ../src/gfxcore.cc:3261
2079	#: ../src/mainfrm.cc:864
2080	#: n:289
2081	msgid "Colour by E&rror"
2082	msgstr ""
2083
2084	#: ../src/mainfrm.cc:866
2085	#: n:294
2086	msgid "Highlight &Entrances"
2087	msgstr ""
2088
2089	#: ../src/mainfrm.cc:867
2090	#: n:295
2091	msgid "Highlight &Fixed Points"
2092	msgstr ""
2093
2094	#: ../src/mainfrm.cc:868
2095	#: n:296
2096	msgid "Highlight E&xported Points"
2097	msgstr ""
2098
2099	#: ../src/printwx.cc:465
2100	#: n:418
2101	msgid "Entrances"
2102	msgstr ""
2103
2104	#: ../src/printwx.cc:469
2105	#: n:419
2106	msgid "Fixed Points"
2107	msgstr ""
2108
2109	#: ../src/printwx.cc:473
2110	#: n:420
2111	msgid "Exported Stations"
2112	msgstr ""
2113
2114	#: ../src/mainfrm.cc:873
2115	#: n:237
2116	msgid "&Perspective"
2117	msgstr ""
2118
2119	#: ../src/mainfrm.cc:875
2120	#: n:238
2121	msgid "Textured &Walls"
2122	msgstr ""
2123
2124	#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2125	#. using that term instead if it gives a better translation which most
2126	#. users will understand.
2127	#: ../src/mainfrm.cc:879
2128	#: n:239
2129	msgid "Fade Distant Ob&jects"
2130	msgstr ""
2131
2132	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2133	#. "survey stations".
2134	#: ../src/mainfrm.cc:882
2135	#: n:298
2136	msgid "Smoot&hed Survey Legs"
2137	msgstr ""
2138
2139	#: ../src/mainfrm.cc:888
2140	#: ../src/mainfrm.cc:892
2141	#: n:356
2142	msgid "Full Screen &Mode\tF11"
2143	msgstr ""
2144
2145	#: ../src/mainfrm.cc:906
2146	#: n:274
2147	msgid "&Compass"
2148	msgstr ""
2149
2150	#: ../src/mainfrm.cc:907
2151	#: n:275
2152	msgid "C&linometer"
2153	msgstr ""
2154
2155	#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2156	#. corresponds to which depth, date, survey closure error, etc.
2157	#: ../src/mainfrm.cc:910
2158	#: n:276
2159	msgid "Colour &Key"
2160	msgstr ""
2161
2162	#: ../src/mainfrm.cc:911
2163	#: n:277
2164	msgid "&Scale Bar"
2165	msgstr ""
2166
2167	#: ../src/mainfrm.cc:901
2168	#: n:280
2169	msgid "&Reverse Sense\tCtrl+R"
2170	msgstr ""
2171
2172	#: ../src/mainfrm.cc:871
2173	#: ../src/mainfrm.cc:903
2174	#: n:281
2175	msgid "&Cancel Measuring Line\tEscape"
2176	msgstr ""
2177
2178	#: ../src/mainfrm.cc:912
2179	#: n:299
2180	msgid "&Indicators"
2181	msgstr ""
2182
2183	#: ../src/z_getopt.c:695
2184	#: ../src/z_getopt.c:707
2185	#: n:300
2186	#, c-format
2187	msgid "%s: option “%s” is ambiguous\n"
2188	msgstr "%s: pilihan “%s” ambigu\n"
2189
2190	#: ../src/z_getopt.c:1023
2191	#: ../src/z_getopt.c:1034
2192	#: n:301
2193	#, c-format
2194	msgid "%s: option “-W %s” is ambiguous\n"
2195	msgstr "%s: pilihan “-W %s” ambigu\n"
2196
2197	#: ../src/z_getopt.c:751
2198	#: ../src/z_getopt.c:755
2199	#: n:302
2200	#, c-format
2201	msgid "%s: option “%c%s” doesn’t allow an argument\n"
2202	msgstr "%s: pilihan “%c%s” tidak mengizinkan argumen\n"
2203
2204	#: ../src/z_getopt.c:740
2205	#: ../src/z_getopt.c:743
2206	#: n:303
2207	#, c-format
2208	msgid "%s: option “--%s” doesn’t allow an argument\n"
2209	msgstr "%s: pilihan “--%s” tidak mengizinkan argumen\n"
2210
2211	#: ../src/z_getopt.c:1058
2212	#: ../src/z_getopt.c:1069
2213	#: n:304
2214	#, c-format
2215	msgid "%s: option “-W %s” doesn’t allow an argument\n"
2216	msgstr "%s: pilihan “-W %s” tidak mengizinkan argumen\n"
2217
2218	#: ../src/z_getopt.c:790
2219	#: ../src/z_getopt.c:802
2220	#: ../src/z_getopt.c:1089
2221	#: ../src/z_getopt.c:1101
2222	#: n:305
2223	#, c-format
2224	msgid "%s: option “%s” requires an argument\n"
2225	msgstr "%s: opsi “%s” membutuhkan sebuah argumen\n"
2226
2227	#: ../src/z_getopt.c:960
2228	#: ../src/z_getopt.c:971
2229	#: ../src/z_getopt.c:1154
2230	#: ../src/z_getopt.c:1166
2231	#: n:306
2232	#, c-format
2233	msgid "%s: option requires an argument -- %c\n"
2234	msgstr "%s: opsi membutuhkan argumen -- %c\n"
2235
2236	#: ../src/z_getopt.c:840
2237	#: ../src/z_getopt.c:843
2238	#: n:307
2239	#, c-format
2240	msgid "%s: unrecognized option “--%s”\n"
2241	msgstr "%s: opsi tidak di-kenal “--%s”\n"
2242
2243	#: ../src/z_getopt.c:851
2244	#: ../src/z_getopt.c:854
2245	#: n:308
2246	#, c-format
2247	msgid "%s: unrecognized option “%c%s”\n"
2248	msgstr "%s: opsi tidak di-kenal “%c%s”\n"
2249
2250	#: ../src/z_getopt.c:901
2251	#: ../src/z_getopt.c:904
2252	#: n:309
2253	#, c-format
2254	msgid "%s: illegal option -- %c\n"
2255	msgstr "%s: opsi ilegal -- %c\n"
2256
2257	#: ../src/z_getopt.c:910
2258	#: ../src/z_getopt.c:913
2259	#: n:310
2260	#, c-format
2261	msgid "%s: invalid option -- %c\n"
2262	msgstr "%s: opsi tidak-valid -- %c\n"
2263
2264	#: ../src/mainfrm.cc:826
2265	#: n:311
2266	msgid "&New Presentation"
2267	msgstr ""
2268
2269	#: ../src/mainfrm.cc:827
2270	#: n:312
2271	msgid "&Open Presentation…"
2272	msgstr ""
2273
2274	#: ../src/mainfrm.cc:828
2275	#: n:313
2276	msgid "&Save Presentation"
2277	msgstr ""
2278
2279	#: ../src/mainfrm.cc:829
2280	#: n:314
2281	msgid "Sa&ve Presentation As…"
2282	msgstr ""
2283
2284	#. TRANSLATORS: "Mark" as in "Mark this position"
2285	#: ../src/mainfrm.cc:832
2286	#: n:315
2287	msgid "&Mark"
2288	msgstr ""
2289
2290	#. TRANSLATORS: "Play" as in "Play back a recording"
2291	#: ../src/mainfrm.cc:834
2292	#: n:316
2293	msgid "Pla&y"
2294	msgstr ""
2295
2296	#: ../src/mainfrm.cc:835
2297	#: n:317
2298	msgid "&Export as Movie…"
2299	msgstr ""
2300
2301	#: ../src/mainfrm.cc:2397
2302	#: n:331
2303	msgid "Export Movie"
2304	msgstr ""
2305
2306	#: ../src/mainfrm.cc:333
2307	#: n:319
2308	msgid "Select an output filename"
2309	msgstr ""
2310
2311	#: ../src/mainfrm.cc:330
2312	#: ../src/mainfrm.cc:2319
2313	#: n:320
2314	msgid "Aven presentations"
2315	msgstr ""
2316
2317	#. TRANSLATORS: title of the save screenshot dialog
2318	#: ../src/mainfrm.cc:1903
2319	#: n:321
2320	msgid "Save Screenshot"
2321	msgstr "Simpan tangkapan layar"
2322
2323	#: ../src/mainfrm.cc:2314
2324	#: ../src/mainfrm.cc:2317
2325	#: n:322
2326	msgid "Select a presentation to open"
2327	msgstr ""
2328
2329	#: ../src/mainfrm.cc:412
2330	#: n:323
2331	#, c-format
2332	msgid "Error in format of presentation file “%s”"
2333	msgstr ""
2334
2335	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2336	#. surveying package, so probably shouldn’t be translated
2337	#: ../src/mainfrm.cc:1873
2338	#: n:324
2339	msgid "Compass PLT files"
2340	msgstr ""
2341
2342	#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2343	#. package, so don’t translate it.
2344	#: ../src/mainfrm.cc:1880
2345	#: n:325
2346	msgid "CMAP XYZ files"
2347	msgstr ""
2348
2349	#. TRANSLATORS: title of message box
2350	#: ../src/mainfrm.cc:1966
2351	#: ../src/mainfrm.cc:2291
2352	#: ../src/mainfrm.cc:2308
2353	#: n:326
2354	msgid "Modified Presentation"
2355	msgstr ""
2356
2357	#. TRANSLATORS: and the question in that box
2358	#: ../src/mainfrm.cc:1964
2359	#: ../src/mainfrm.cc:2290
2360	#: ../src/mainfrm.cc:2307
2361	#: n:327
2362	msgid "The current presentation has been modified. Abandon unsaved changes?"
2363	msgstr ""
2364
2365	#: ../src/mainfrm.cc:2608
2366	#: ../src/mainfrm.cc:2619
2367	#: n:328
2368	msgid "No matches were found."
2369	msgstr ""
2370
2371	#~ msgid "Open &Terrain…"
2372	#~ msgstr ""
2373
2374	#~ msgid "Solid Su&rface"
2375	#~ msgstr ""
2376
2377	#. TRANSLATORS: number of stations found matching search
2378	#, c-format
2379	#~ msgid "%d found"
2380	#~ msgstr "%d ditemukan"
2381
2382	#. TRANSLATORS: "Find stations" button tooltip
2383	#: ../src/mainfrm.cc:989
2384	#: n:332
2385	msgid "Find"
2386	msgstr "Cari"
2387
2388	#. TRANSLATORS: "Hide stations" button default tooltip
2389	#: ../src/mainfrm.cc:991
2390	#: ../src/mainfrm.cc:2651
2391	#: n:333
2392	msgid "Hide"
2393	msgstr "Tersembunyi"
2394
2395	#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2396	#: ../src/mainfrm.cc:2612
2397	#: n:334
2398	#, c-format
2399	msgid "Hide %d found stations"
2400	msgstr ""
2401
2402	#: ../src/mainfrm.cc:213
2403	#: ../src/mainfrm.cc:2049
2404	#: ../src/mainfrm.cc:2132
2405	#: ../src/mainfrm.cc:2185
2406	#: n:335
2407	msgid "Altitude"
2408	msgstr ""
2409
2410	#. TRANSLATORS: error if you try to drag multiple files to the aven
2411	#. window
2412	#: ../src/mainfrm.cc:690
2413	#: n:336
2414	msgid "You may only view one 3d file at a time."
2415	msgstr ""
2416
2417	#: ../src/mainfrm.cc:913
2418	#: n:337
2419	msgid "&Side Panel"
2420	msgstr ""
2421
2422	#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2423	#. Easting)
2424	#: ../src/mainfrm.cc:2047
2425	#: ../src/mainfrm.cc:2069
2426	#: ../src/mainfrm.cc:2071
2427	#: ../src/mainfrm.cc:2184
2428	#: n:338
2429	msgid "%.2f E, %.2f N"
2430	msgstr ""
2431
2432	#. TRANSLATORS: Used in Aven:
2433	#. From <stationname>
2434	#. H: 123.45m V: 234.56m
2435	#. Dist: 456.78m Brg: 200
2436	#: ../src/mainfrm.cc:2090
2437	#: ../src/mainfrm.cc:2142
2438	#: ../src/mainfrm.cc:2205
2439	#: n:339
2440	#, c-format
2441	msgid "From %s"
2442	msgstr ""
2443
2444	#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2445	#: ../src/mainfrm.cc:2218
2446	#: n:340
2447	#, c-format
2448	msgid "H %.2f%s, V %.2f%s"
2449	msgstr ""
2450
2451	#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2452	#. in Compass bearing)
2453	#: ../src/mainfrm.cc:2230
2454	#: n:341
2455	#, c-format
2456	msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2457	msgstr ""
2458
2459	#. TRANSLATORS: tickable menu item in View menu
2460	#: ../src/gfxcore.cc:3250
2461	#: ../src/gfxcore.cc:3268
2462	#: ../src/mainfrm.cc:915
2463	#: n:342
2464	msgid "&Metric"
2465	msgstr ""
2466
2467	#. TRANSLATORS: tickable menu item in View menu.
2468	#.
2469	#. Degrees are the angular measurement where there are 360 in a full
2470	#. circle.
2471	#: ../src/gfxcore.cc:3215
2472	#: ../src/gfxcore.cc:3233
2473	#: ../src/mainfrm.cc:916
2474	#: n:343
2475	msgid "&Degrees"
2476	msgstr ""
2477
2478	#. TRANSLATORS: tickable menu item in View menu.
2479	#.
2480	#. Show the tilt of the survey as a percentage gradient (100% = 45
2481	#. degrees = 50 grad).
2482	#: ../src/gfxcore.cc:3238
2483	#: ../src/mainfrm.cc:917
2484	#: n:430
2485	msgid "&Percent"
2486	msgstr ""
2487
2488	#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2489	#. used e.g. "5km".
2490	#.
2491	#. If there should be a space between the number and this, include
2492	#. one in the translation.
2493	#: ../src/gfxcore.cc:1148
2494	#: ../src/printwx.cc:1092
2495	#: n:423
2496	msgid "km"
2497	msgstr ""
2498
2499	#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2500	#. e.g. "10m".
2501	#.
2502	#. If there should be a space between the number and this, include
2503	#. one in the translation.
2504	#: ../src/gfxcore.cc:1022
2505	#: ../src/gfxcore.cc:1155
2506	#: ../src/mainfrm.cc:2038
2507	#: ../src/mainfrm.cc:2107
2508	#: ../src/mainfrm.cc:2127
2509	#: ../src/mainfrm.cc:2177
2510	#: ../src/mainfrm.cc:2209
2511	#: ../src/printwx.cc:1094
2512	#: n:424
2513	msgid "m"
2514	msgstr ""
2515
2516	#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2517	#. used e.g. "50cm".
2518	#.
2519	#. If there should be a space between the number and this, include
2520	#. one in the translation.
2521	#: ../src/gfxcore.cc:1163
2522	#: ../src/printwx.cc:1097
2523	#: n:425
2524	msgid "cm"
2525	msgstr ""
2526
2527	#. TRANSLATORS: abbreviation for "miles" (unit of length,
2528	#. plural), used e.g. "2 miles".
2529	#.
2530	#. If there should be a space between the number and this,
2531	#. include one in the translation.
2532	#: ../src/gfxcore.cc:1176
2533	#: n:426
2534	msgid " miles"
2535	msgstr ""
2536
2537	#. TRANSLATORS: abbreviation for "mile" (unit of length,
2538	#. singular), used e.g. "1 mile".
2539	#.
2540	#. If there should be a space between the number and this,
2541	#. include one in the translation.
2542	#: ../src/gfxcore.cc:1183
2543	#: n:427
2544	msgid " mile"
2545	msgstr ""
2546
2547	#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2548	#. as "10ft".
2549	#.
2550	#. If there should be a space between the number and this, include
2551	#. one in the translation.
2552	#: ../src/gfxcore.cc:1022
2553	#: ../src/gfxcore.cc:1191
2554	#: ../src/mainfrm.cc:2043
2555	#: ../src/mainfrm.cc:2110
2556	#: ../src/mainfrm.cc:2130
2557	#: ../src/mainfrm.cc:2182
2558	#: ../src/mainfrm.cc:2214
2559	#: n:428
2560	msgid "ft"
2561	msgstr ""
2562
2563	#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2564	#. e.g. as "6in".
2565	#.
2566	#. If there should be a space between the number and this, include
2567	#. one in the translation.
2568	#: ../src/gfxcore.cc:1199
2569	#: n:429
2570	msgid "in"
2571	msgstr ""
2572
2573	#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2574	#: ../src/gfxcore.cc:3213
2575	#: n:387
2576	msgid "&Hide Compass"
2577	msgstr ""
2578
2579	#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2580	#: ../src/gfxcore.cc:3228
2581	#: n:384
2582	msgid "&Hide Clino"
2583	msgstr ""
2584
2585	#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2586	#: ../src/gfxcore.cc:3248
2587	#: n:385
2588	msgid "&Hide scale bar"
2589	msgstr ""
2590
2591	#. TRANSLATORS: Menu item which turns off the colour key.
2592	#. The "Colour Key" is the thing in aven showing which colour
2593	#. corresponds to which depth, date, survey closure error, etc.
2594	#: ../src/gfxcore.cc:3266
2595	#: n:386
2596	msgid "&Hide colour key"
2597	msgstr ""
2598
2599	#. TRANSLATORS: degree symbol - probably should be translated to
2600	#. itself.
2601	#: ../src/gfxcore.cc:697
2602	#: ../src/gfxcore.cc:772
2603	#: ../src/mainfrm.cc:2094
2604	#: ../src/mainfrm.cc:2222
2605	#: ../src/printwx.cc:983
2606	#: ../src/printwx.cc:1011
2607	#: ../src/printwx.cc:1015
2608	#: ../src/printwx.cc:1019
2609	#: ../src/printwx.cc:1029
2610	#: n:344
2611	msgid "°"
2612	msgstr "°"
2613
2614	#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2615	#. circle).
2616	#: ../src/gfxcore.cc:702
2617	#: ../src/gfxcore.cc:777
2618	#: n:76
2619	msgid "ᵍ"
2620	msgstr ""
2621
2622	#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2623	#. full circle). Try to make this as short as sensibly possible.
2624	#.
2625	#. E.g. in Italian and Spanish we use "g.cent." rather than
2626	#. "gradi quattrocentesimali"/"grados centesimales"
2627	#: ../src/mainfrm.cc:2102
2628	#: ../src/mainfrm.cc:2225
2629	#: n:345
2630	msgid "grad"
2631	msgstr ""
2632
2633	#. TRANSLATORS: symbol for percentage gradient (100% = 45
2634	#. degrees = 50 grad).
2635	#: ../src/gfxcore.cc:763
2636	#: ../src/gfxcore.cc:781
2637	#: n:96
2638	msgid "%"
2639	msgstr ""
2640
2641	#. TRANSLATORS: used for the percentage gradient on
2642	#. vertical angles.
2643	#: ../src/gfxcore.cc:757
2644	#: n:431
2645	msgid "∞"
2646	msgstr ""
2647
2648	#: ../src/mainfrm.cc:896
2649	#: n:347
2650	#~ msgid "&Preferences…"
2651	#~ msgstr "&Preferensi…"
2652
2653	#: n:348
2654	#~ msgid "Draw passage walls"
2655	#~ msgstr ""
2656
2657	#: n:349
2658	#~ msgid "Estimate LRUD readings based on heuristics"
2659	#~ msgstr ""
2660
2661	#: n:350
2662	#~ msgid "Mark survey stations with crosses"
2663	#~ msgstr ""
2664
2665	#: n:351
2666	#~ msgid "Highlight stations marked as entrances"
2667	#~ msgstr ""
2668
2669	#: n:352
2670	#~ msgid "Highlight stations marked as fixed points"
2671	#~ msgstr ""
2672
2673	#: n:353
2674	#~ msgid "Highlight stations which are exported"
2675	#~ msgstr ""
2676
2677	#: n:354
2678	#~ msgid "Mark survey stations with their names"
2679	#~ msgstr ""
2680
2681	#: n:355
2682	#~ msgid "Allow names to overlap on the display (faster)"
2683	#~ msgstr ""
2684
2685	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2686	#. "survey stations".
2687	#: n:357
2688	#~ msgid "Display underground survey legs"
2689	#~ msgstr ""
2690
2691	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2692	#. "survey stations".
2693	#: n:358
2694	#~ msgid "Display surface survey legs"
2695	#~ msgstr ""
2696
2697	#: n:359
2698	#~ msgid "Colour surface surveys by depth"
2699	#~ msgstr ""
2700
2701	#: n:360
2702	#~ msgid "Draw surface legs with dashed lines"
2703	#~ msgstr ""
2704
2705	#: n:361
2706	#~ msgid "Draw a grid"
2707	#~ msgstr ""
2708
2709	#: n:362
2710	#~ msgid "metric units"
2711	#~ msgstr ""
2712
2713	#. TRANSLATORS: Miles, Feet, Inches, etc. What they call "English units" in
2714	#. the USA (rather confusingly now that England has largely gone metric!)
2715	#: n:363
2716	#~ msgid "imperial units"
2717	#~ msgstr ""
2718
2719	#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
2720	#. full circle.
2721	#: n:364
2722	#~ msgid "degrees (°)"
2723	#~ msgstr ""
2724
2725	#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
2726	#. full circle.
2727	#: n:365
2728	#~ msgid "grads"
2729	#~ msgstr ""
2730
2731	#: n:366
2732	#~ msgid "Display measurements in"
2733	#~ msgstr ""
2734
2735	#: n:367
2736	#~ msgid "Display angles in"
2737	#~ msgstr ""
2738
2739	#. TRANSLATORS: reverses the sense of the mouse controls
2740	#: n:368
2741	#~ msgid "Reverse the sense of the controls"
2742	#~ msgstr ""
2743
2744	#: n:369
2745	#~ msgid "Display scale bar"
2746	#~ msgstr ""
2747
2748	#: n:370
2749	#~ msgid "Display depth bar"
2750	#~ msgstr ""
2751
2752	#: n:371
2753	#~ msgid "Display compass"
2754	#~ msgstr ""
2755
2756	#: n:372
2757	#~ msgid "Display clinometer"
2758	#~ msgstr ""
2759
2760	#: n:373
2761	#~ msgid "Display side panel"
2762	#~ msgstr ""
2763
2764	#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2765	#. in Compass bearing)
2766	#: ../src/mainfrm.cc:2114
2767	#: n:374
2768	#, c-format
2769	msgid "%s: H %.2f%s, Brg %03d%s"
2770	msgstr ""
2771
2772	#. TRANSLATORS: "V" is short for "Vertical"
2773	#: ../src/mainfrm.cc:2148
2774	#: n:375
2775	#, c-format
2776	msgid "%s: V %.2f%s"
2777	msgstr ""
2778
2779	#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2780	#. tree hierarchy of survey station names
2781	#: ../src/mainfrm.cc:1044
2782	#: n:376
2783	msgid "Surveys"
2784	msgstr ""
2785
2786	#: ../src/mainfrm.cc:1045
2787	#: n:377
2788	msgid "Presentation"
2789	msgstr ""
2790
2791	#: ../src/mainfrm.cc:211
2792	#: n:378
2793	msgid "Easting"
2794	msgstr ""
2795
2796	#: ../src/mainfrm.cc:212
2797	#: n:379
2798	msgid "Northing"
2799	msgstr ""
2800
2801	#: ../src/mainfrm.cc:761
2802	#: n:380
2803	msgid "&Print…\tCtrl+P"
2804	msgstr "&Cetak…\tCtrl+P"
2805
2806	#: ../src/mainfrm.cc:762
2807	#: n:381
2808	msgid "P&age Setup…"
2809	msgstr "&Tata Halaman…"
2810
2811	#: ../src/mainfrm.cc:766
2812	#: n:382
2813	msgid "&Export as…"
2814	msgstr ""
2815
2816	#. TRANSLATORS: Title of file dialog to choose name and type of exported
2817	#. file.
2818	#: ../src/printwx.cc:619
2819	#: n:401
2820	msgid "Export as:"
2821	msgstr ""
2822
2823	#. TRANSLATORS: Title of the export
2824	#. dialog
2825	#: ../src/printwx.cc:295
2826	#: n:383
2827	msgid "Export"
2828	msgstr "Ekspor"
2829
2830	#. TRANSLATORS: for about box:
2831	#: ../src/aboutdlg.cc:142
2832	#: n:390
2833	msgid "System Information:"
2834	msgstr ""
2835
2836	#. TRANSLATORS: Title of the print preview dialog
2837	#: ../src/printwx.cc:656
2838	#: n:398
2839	msgid "Print Preview"
2840	msgstr "Pratilik Cetak"
2841
2842	#. TRANSLATORS: Title of the print
2843	#. dialog
2844	#: ../src/printwx.cc:292
2845	#: n:399
2846	msgid "Print"
2847	msgstr "Cetak"
2848
2849	#: ../src/printwx.cc:566
2850	#: n:400
2851	msgid "&Print…"
2852	msgstr "&Cetak…"
2853
2854	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2855	#. "survey stations".
2856	#: ../src/printwx.cc:453
2857	#: n:403
2858	msgid "Sur&face Survey Legs"
2859	msgstr ""
2860
2861	#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2862	#: ../src/mainfrm.cc:97
2863	#: n:404
2864	msgid "Edit Waypoint"
2865	msgstr ""
2866
2867	#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2868	#. in a presentation.
2869	#: ../src/mainfrm.cc:136
2870	#: n:278
2871	msgid " (unused in perspective view)"
2872	msgstr ""
2873
2874	#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2875	#. presentation.
2876	#: ../src/mainfrm.cc:143
2877	#: n:279
2878	msgid "Time: "
2879	msgstr "Waktu: "
2880
2881	#. TRANSLATORS: units+info after time field in dialog to edit a
2882	#. waypoint in a presentation.
2883	#: ../src/mainfrm.cc:147
2884	#: n:282
2885	msgid " secs (0 = auto; *6 = 6 times auto)"
2886	msgstr ""
2887
2888	#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2889	#. perhaps by "Survex" or other things in future).
2890	#: ../src/aven.cc:230
2891	#: n:405
2892	#, c-format
2893	msgid "This version of %s requires OpenGL to work, but it isn’t available."
2894	msgstr ""
2895
2896	#. TRANSLATORS: for diffpos:
2897	#: ../src/diffpos.c:159
2898	#: n:500
2899	#, c-format
2900	msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2901	msgstr ""
2902
2903	#. TRANSLATORS: for diffpos:
2904	#: ../src/diffpos.c:196
2905	#: n:501
2906	#, c-format
2907	msgid "Added: %s"
2908	msgstr ""
2909
2910	#. TRANSLATORS: for diffpos:
2911	#: ../src/diffpos.c:219
2912	#: n:502
2913	#, c-format
2914	msgid "Deleted: %s"
2915	msgstr ""
2916
2917	#. TRANSLATORS: for extend: the user specified breaking a loop or
2918	#. changing extend direction at this station, but we didn’t find it in
2919	#. the 3d file
2920	#: ../src/extend.c:262
2921	#: ../src/extend.c:280
2922	#: ../src/extend.c:325
2923	#: ../src/extend.c:367
2924	#: ../src/extend.c:409
2925	#: n:510
2926	#, c-format
2927	msgid "Failed to find station %s"
2928	msgstr ""
2929
2930	#. TRANSLATORS: for extend: the user specified breaking a loop or
2931	#. changing extend direction at this leg, but we didn’t find it in the
2932	#. 3d file
2933	#: ../src/extend.c:306
2934	#: ../src/extend.c:348
2935	#: ../src/extend.c:390
2936	#: ../src/extend.c:432
2937	#: n:511
2938	#, c-format
2939	msgid "Failed to find leg %s → %s"
2940	msgstr ""
2941
2942	#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
2943	#: ../src/extend.c:253
2944	#: n:512
2945	#, c-format
2946	msgid "Starting from station %s"
2947	msgstr ""
2948
2949	#. TRANSLATORS: for extend:
2950	#: ../src/extend.c:273
2951	#: n:513
2952	#, c-format
2953	msgid "Extending to the left from station %s"
2954	msgstr ""
2955
2956	#. TRANSLATORS: for extend:
2957	#: ../src/extend.c:318
2958	#: n:514
2959	#, c-format
2960	msgid "Extending to the right from station %s"
2961	msgstr ""
2962
2963	#. TRANSLATORS: for extend:
2964	#: ../src/extend.c:293
2965	#: n:515
2966	#, c-format
2967	msgid "Extending to the left from leg %s → %s"
2968	msgstr ""
2969
2970	#. TRANSLATORS: for extend:
2971	#: ../src/extend.c:338
2972	#: n:516
2973	#, c-format
2974	msgid "Extending to the right from leg %s → %s"
2975	msgstr ""
2976
2977	#. TRANSLATORS: for extend:
2978	#: ../src/extend.c:402
2979	#: n:517
2980	#, c-format
2981	msgid "Breaking survey loop at station %s"
2982	msgstr ""
2983
2984	#. TRANSLATORS: for extend:
2985	#: ../src/extend.c:422
2986	#: n:518
2987	#, c-format
2988	msgid "Breaking survey loop at leg %s → %s"
2989	msgstr ""
2990
2991	#. TRANSLATORS: for extend:
2992	#: ../src/extend.c:360
2993	#: n:519
2994	#, c-format
2995	msgid "Swapping extend direction from station %s"
2996	msgstr ""
2997
2998	#. TRANSLATORS: for extend:
2999	#: ../src/extend.c:380
3000	#: n:520
3001	#, c-format
3002	msgid "Swapping extend direction from leg %s → %s"
3003	msgstr ""
3004
3005	#. TRANSLATORS: for extend:
3006	#: ../src/extend.c:550
3007	#: n:521
3008	#, c-format
3009	msgid "Applying specfile: “%s”"
3010	msgstr ""
3011
3012	#. TRANSLATORS: for extend:
3013	#. Used to tell the user that a file is being written - %s is the filename
3014	#: ../src/extend.c:613
3015	#: n:522
3016	#, c-format
3017	msgid "Writing %s…"
3018	msgstr ""
3019
3020	#: ../src/findentrances.cc:100
3021	#: ../src/gpx.cc:70
3022	#: n:287
3023	#, c-format
3024	msgid "Failed to initialise input coordinate system “%s”"
3025	msgstr ""
3026
3027	#: ../src/findentrances.cc:103
3028	#: ../src/gpx.cc:75
3029	#: n:288
3030	#, c-format
3031	msgid "Failed to initialise output coordinate system “%s”"
3032	msgstr ""
3033
3034	#: ../src/findentrances.cc:158
3035	#: n:388
3036	msgid "-d PROJ_DATUM 3D_FILE"
3037	msgstr ""
3038
3039	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
3040	#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
3041	#. what the input datum is.
3042	#: ../src/findentrances.cc:149
3043	#: n:389
3044	msgid "input datum as string to pass to PROJ"
3045	msgstr ""
3046
3047	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
3048	#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
3049	#. of the coordinate projection in use, the user must specify it here for
3050	#. export formats which need to know it (e.g. GPX).
3051	#: ../src/printwx.cc:527
3052	#: n:440
3053	msgid "Coordinate projection"
3054	msgstr ""
3055
3056	#: ../src/readval.c:336
3057	#: n:392
3058	msgid "Separator in survey name"
3059	msgstr ""
3060
3061	#: ../src/readval.c:124
3062	#: ../src/readval.c:139
3063	#: ../src/readval.c:156
3064	#: n:3
3065	msgid "Can't have a leg between two anonymous stations"
3066	msgstr ""
3067
3068	#: ../src/dump3d.c:52
3069	#: n:396
3070	msgid "show survey date information (if present)"
3071	msgstr ""
3072
3073	#: ../src/mainfrm.cc:858
3074	#: n:406
3075	msgid "Spla&y Legs"
3076	msgstr ""
3077
3078	#: ../src/mainfrm.cc:855
3079	#: n:407
3080	msgid "&Hide"
3081	msgstr "&Tersembunyi"
3082
3083	#: ../src/mainfrm.cc:856
3084	#: n:408
3085	msgid "&Fade"
3086	msgstr ""
3087
3088	#: ../src/mainfrm.cc:857
3089	#: n:409
3090	msgid "&Show"
3091	msgstr ""
3092
3093	#: ../src/printwx.cc:360
3094	#: n:410
3095	msgid "Export format"
3096	msgstr ""

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format