source: git/lib/fr.po @ ccb83b7

msgid ""
msgstr ""
"Project-Id-Version: survex\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
"Last-Translator: Eric Madelaine <eric.madelaine@inria.fr>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fr\n"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
#. allocate space for.
#: ../src/message.c:83
#: n:1
#, c-format
msgid "Out of memory (couldn’t find %lu bytes)."
msgstr "Plus de mémoire (%lu octets nécessaires, non disponibles)."

#. TRANSLATORS: Feel free to translate as "or newer" instead of "or greater" if that
#. gives a more natural translation.  It's technically not quite right when there are
#. parallel active release series (e.g. Survex 1.0.40 was released *after* 1.2.0), but
#. this seems unlikely to confuse users.
#: ../src/commands.c:1567
#: n:2
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "Une version %s ou supérieure de Survex est nécessaire pour traiter ces données."

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#: ../src/aven.cc:365
#: ../src/message.c:1235
#: n:4
msgid "warning"
msgstr "avertissement"

#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u by
#. the line number in that file.
#: ../src/datain.c:105
#: n:5
#, c-format
msgid "In file included from %s:%u:\n"
msgstr "Dans le fichier inclus depuis %s:%u:\n"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:535
#: n:6
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix n’est plus utilisé - employer *begin et *end à la place"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/readval.c:205
#: n:7
#, c-format
msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "Caractère “%c” interdit dans un nom de station (cf *SET NAMES pour modifier la liste des caractères autorisés)"

#: ../src/readval.c:384
#: n:8
msgid "Field may not be omitted"
msgstr "Ce champ ne peut pas être vide"

#: ../src/datain.c:1469
#: ../src/datain.c:1749
#: ../src/readval.c:386
#: ../src/readval.c:427
#: ../src/readval.c:457
#: n:9
#, c-format
msgid "Expecting numeric field, found “%s”"
msgstr "On attendait une valeur numérique, on a trouvé “%s”"

#: ../src/commands.c:1473
#: n:10
#, c-format
msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
msgstr "Vous avez écrit “%s”; on attendait “PRESERVE”, “TOUPPER”, ou “TOLOWER”"

#: ../src/debug.h:45
#: ../src/debug.h:47
#: ../src/matrix.c:352
#: ../src/message.c:233
#: n:11
msgid "Bug in program detected! Please report this to the authors"
msgstr "Bug détecté dans le programme! Signaler ce message à l’auteur S.V.P."

#: ../src/commands.c:1681
#: ../src/extend.c:420
#: n:12
#, c-format
msgid "Unknown command “%s”"
msgstr "Commande inconnue “%s”"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netbits.c:401
#: n:13
#, c-format
msgid "Station “%s” equated to itself"
msgstr "Station “%s” ne doit pas être déclarée “égale” à elle-même"

#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between survey stations.
#: ../src/datain.c:997
#: n:14
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "La valeur de l’azimut ne peut être omise, sauf sur les visées verticales"

#: ../src/datain.c:244
#: ../src/extend.c:425
#: n:15
msgid "End of line not blank"
msgstr "Fin de ligne non vide"

#: ../src/cavern.c:385
#: n:16
#, c-format
msgid "There were %d warning(s)."
msgstr "Il y a %d avertissement(s)."

#. TRANSLATORS: %s is replaced by the command we attempted to run.
#: ../src/cavernlog.cc:174
#: ../src/cavernlog.cc:232
#: n:17
#, c-format
msgid "Couldn’t run external command: “%s”"
msgstr "Ne peut pas exécuter la commande externe: “%s”"

#: ../src/datain.c:80
#: ../src/datain.c:88
#: ../src/datain.c:95
#: ../src/datain.c:730
#: ../src/extend.c:541
#: ../src/sorterr.c:75
#: ../src/sorterr.c:92
#: ../src/sorterr.c:234
#: n:18
msgid "Error reading file"
msgstr "Erreur lors de la lecture du fichier"

#: ../src/message.c:1250
#: n:19
msgid "Too many errors - giving up"
msgstr "Trop d’erreurs, j’abandonne"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:1352
#: n:20
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "*DEFAULT n’est plus utilisé - employer *CALIBRATE/DATA/SD/UNITS avec argument DEFAULT à la place"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
#. So the problem here is that the leg is vertical, so a compass reading has
#. no meaning!
#: ../src/datain.c:970
#: n:21
msgid "Compass reading given on plumbed leg"
msgstr "Lecture d’azimut donnée sur une visée verticale"

#: ../src/commands.c:619
#: n:22
msgid "END with no matching BEGIN in this file"
msgstr "END sans BEGIN correspondant dans ce fichier"

#: ../src/datain.c:717
#: n:23
msgid "BEGIN with no matching END in this file"
msgstr "BEGIN sans END correspondant dans ce fichier"

#: ../src/datain.c:361
#: ../src/img_hosted.c:30
#: ../src/printwx.cc:1458
#: n:24
#, c-format
msgid "Couldn’t open data file “%s”"
msgstr "Ne peut pas ouvrir le fichier de données “%s”"

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
#. deprecated, so this error would be generated by:
#.
#. *equate \foo.7 1
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:444
#: ../src/readval.c:90
#: ../src/readval.c:94
#: n:25
msgid "ROOT is deprecated"
msgstr "ROOT n’est plus utilisé"

#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
#. "Station “\outer.inner.1” not exported from survey “\outer”)":
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#: ../src/commands.c:861
#: ../src/listpos.c:107
#: ../src/readval.c:324
#: n:26
#, c-format
msgid "Station “%s” not exported from survey “%s”"
msgstr "La station “%s” n’est pas exportée de la topographie “%s”"

#. TRANSLATORS: This error occurs if there's an attempt to export a station
#. from a survey which doesn't actually exist.
#: ../src/listpos.c:110
#: n:286
#, c-format
msgid "Reference to station “%s” from non-existent survey “%s”"
msgstr "Référence à la station “%s” à partir de la topographie “%s” inexistante"

#: ../src/readval.c:296
#: n:27
#, c-format
msgid "“%s” can’t be both a station and a survey"
msgstr "“%s” ne peut être à la fois une station et une topographie"

#: ../src/extend.c:247
#: ../src/extend.c:262
#: ../src/extend.c:302
#: ../src/extend.c:342
#: ../src/extend.c:382
#: ../src/readval.c:202
#: n:28
msgid "Expecting station name"
msgstr "On attendait un nom de station"

#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:507
#: n:29
msgid "Reentering an existing prefix level is deprecated"
msgstr "Ré-utiliser un même préfixe n’est pas recommandé"

#: ../src/commands.c:514
#: n:30
msgid "Originally entered here"
msgstr "Préfixe utilisé une premiére fois ici"

#: ../src/commands.c:1503
#: n:31
#, c-format
msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
msgstr "Vous avez écrit “%s”; on attendait “EQUATES”, “EXPORTS”, ou “PLUMBS”"

#: ../src/commands.c:1510
#: n:32
#, c-format
msgid "Found “%s”, expecting “ON” or “OFF”"
msgstr "Vous avez écrit “%s”; on attendait “ON” ou “OFF”"

#. TRANSLATORS: EQUATE is a command name, so shouldn’t be translated.
#: ../src/commands.c:834
#: n:33
msgid "Only one station in EQUATE command"
msgstr "Une seule station dans une commande EQUATE"

#: ../src/commands.c:398
#: n:34
#, c-format
msgid "Unknown quantity “%s”"
msgstr "Quantité “%s” inconnue"

#: ../src/commands.c:318
#: n:35
#, c-format
msgid "Unknown units “%s”"
msgstr "Unité “%s” inconnue"

#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:636
#: n:36
msgid "Matching BEGIN tag has no prefix"
msgstr "Le tag BEGIN correspondant n’a pas de préfixe"

#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
#. the correct term in other languages may be singular.
#: ../src/commands.c:328
#: n:37
#, c-format
msgid "Invalid units “%s” for quantity"
msgstr "Unité “%s” incorrecte pour une quantité"

#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
#. a filename parameter - we don’t really want it here, so lose it with "%.0s"
#. (which should display 0 characters from the filename) FIXME: sort out this
#: ../src/img_hosted.c:31
#: n:38
msgid "Out of memory %.0s"
msgstr "Plus de mémoire %.0s"

#: ../src/commands.c:391
#: n:39
#, c-format
msgid "Unknown instrument “%s”"
msgstr "Instrument “%s” inconnu"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
#: ../src/commands.c:1324
#: n:40
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "Le facteur d’échelle doit être égal à 1.0 pour DECLINATION"

#. TRANSLATORS: If the scale factor for an instrument is zero, then any reading
#. would be mapped to zero, which doesn't make sense.
#: ../src/commands.c:1328
#: n:391
msgid "Scale factor must be non-zero"
msgstr "Le facteur d’échelle doit être non nul"

#: ../src/commands.c:1371
#: n:41
#, c-format
msgid "Unknown setting “%s”"
msgstr "Paramètres “%s” inconnus"

#: ../src/commands.c:436
#: n:42
#, c-format
msgid "Unknown character class “%s”"
msgstr "Classe de caractère inconnue “%s”"

#: ../src/extend.c:587
#: ../src/netskel.c:90
#: n:43
msgid "No survey data"
msgstr "Pas de données topo"

#: ../src/filename.c:52
#: ../src/img_hosted.c:32
#: n:44
#, c-format
msgid "Filename “%s” refers to directory"
msgstr "Nom de fichier “%s” relatif à un répertoire"

#: ../src/netartic.c:384
#: n:45
msgid "Survey not all connected to fixed stations"
msgstr "Relevés topo pas tous reliés à des points fixes"

#: ../src/commands.c:770
#: ../src/datain.c:643
#: n:46
msgid "Station already fixed or equated to a fixed point"
msgstr "Station déjà déclaré fixe ou équivalente à un point fixe"

#: ../src/cavern.c:288
#: ../src/filename.c:55
#: ../src/img_hosted.c:33
#: n:47
#, c-format
msgid "Failed to open output file “%s”"
msgstr "N’a pas réussi à ouvrir le fichier de sortie “%s”"

#: ../src/commands.c:1426
#: n:48
msgid "Standard deviation must be positive"
msgstr "La déviation standard doit être positive"

#. TRANSLATORS: as in: Usage: cavern …
#: ../src/cmdline.c:165
#: n:49
msgid "Usage"
msgstr "Usage"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#.
#. %s is replaced by the name of the station.
#: ../src/netbits.c:329
#: n:50
#, c-format
msgid "Survey leg with same station (“%s”) at both ends - typing error?"
msgstr "Visée avec 2 extrémités identiques (“%s”) - erreur de frappe?"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/datain.c:923
#: ../src/datain.c:931
#: ../src/datain.c:943
#: n:51
msgid "Clino reading over 90 degrees (absolute value)"
msgstr "Lecture de clino supérieure à 90 degrés (en value absolue)"

#: ../src/netbits.c:416
#: n:52
#, c-format
msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
msgstr "Vous tentez de de rendre égaux deux points fixes distincts: “%s” et “%s”"

#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
#: ../src/netbits.c:422
#: n:53
#, c-format
msgid "Equating two equal fixed points: “%s” and “%s”"
msgstr "Rend equivalents deux points fixes égaux: “%s” et “%s”"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:693
#: n:54
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "Commande FIX sans coordonnées - fixé à (0,0,0)"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:773
#: ../src/datain.c:645
#: n:55
msgid "Station already fixed at the same coordinates"
msgstr "Station déjà fixée aux même coordonnées"

#: ../src/commands.c:686
#: n:56
msgid "More than one FIX command with no coordinates"
msgstr "Plusieurs commandes FIX sans coordonnées"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
#. would generate error 57:
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:1688
#: n:57
msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
msgstr "*EXPORT doit suivre immédiatement “*BEGIN <SURVEY>”"

#: ../src/readval.c:514
#: n:58
msgid "Invalid year (< 1900 or > 2078)"
msgstr "Année invalide (< 1900 ou > 2078)"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
#: ../src/datain.c:825
#: ../src/datain.c:834
#: n:59
msgid "Suspicious compass reading"
msgstr "Lecture de compas suspecte"

#: ../src/datain.c:1445
#: n:60
msgid "Negative tape reading"
msgstr "Lecture de longueur négative"

#: ../src/commands.c:688
#: n:61
msgid "Same station fixed twice with no coordinates"
msgstr "Même station fixée deux fois sans coordonées"

#. TRANSLATORS: This means that the data fed in said this.
#. It could be a gross error (e.g. the decimal point is missing from
#. the depth gauge reading) or it could just be due to random error on
#. a near vertical leg
#: ../src/datain.c:1144
#: n:62
msgid "Tape reading is less than change in depth"
msgstr "Lecture de longeur inférieure à la différence de profondeur"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. neither style nor reading is a keyword in the program
#. This error complains about a depth gauge reading in normal style, for example
#: ../src/commands.c:1069
#: n:63
#, c-format
msgid "Reading “%s” not allowed in data style “%s”"
msgstr "Donnée “%s” incorrecte pour le style de données “%s”"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1238
#: n:64
#, c-format
msgid "Too few readings for data style “%s”"
msgstr "Trop peu de données pour le style de données “%s”"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#: ../src/commands.c:1034
#: n:65
#, c-format
msgid "Data style “%s” unknown"
msgstr "Style de données “%s” inconnu"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#.
#. Exporting a station twice give error 66:
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:905
#: n:66
#, c-format
msgid "Station “%s” already exported"
msgstr "Station “%s” déjà exportée"

#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
#: ../src/commands.c:1089
#: n:67
#, c-format
msgid "Duplicate reading “%s”"
msgstr "Donnée dupliquée “%s”"

#: ../src/commands.c:800
#: n:68
#, c-format
msgid "FLAG “%s” unknown"
msgstr "FLAG “%s” inconnu"

#: ../src/readval.c:471
#: n:69
msgid "Missing \""
msgstr "\" manquant"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/listpos.c:121
#: n:70
#, c-format
msgid "Station “%s” referred to just once, with an explicit prefix - typo?"
msgstr "La station “%s” n’est mentionnée qu’une fois, avec un préfixe explicite - typo?"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netartic.c:394
#: n:71
msgid "The following survey stations are not attached to a fixed point:"
msgstr "Les stations topo suivantes ne sont pas attachés à des points fixes:"

#: ../src/netskel.c:129
#: n:72
#, c-format
msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
msgstr "La topo n’a pas de points fixes. Par conséquent j’ai fixé %s à (0,0,0)"

#. TRANSLATORS: fixed survey station that is not part of any survey
#: ../src/netskel.c:919
#: n:73
#, c-format
msgid "Unused fixed point “%s”"
msgstr "Point fixe non utilisé “%s”"

#: ../src/matrix.c:123
#: n:74
msgid "Network solved by reduction - no simultaneous equations to solve."
msgstr "Système resolu par réduction - pas d’équations simultanés à résoudre."

#: ../src/matrix.c:134
#: n:75
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "Résoud un système de %d équations"

#: ../src/commands.c:1146
#: n:77
#, c-format
msgid "Reading “%s” duplicates previous reading(s)"
msgstr "La valeur “%s” fait doublon avec une ou des valeur(s) précédante(s)"

#: ../src/matrix.c:132
#: n:78
msgid "Solving one equation"
msgstr "Résoud une équation"

#: ../src/datain.c:896
#: ../src/datain.c:1138
#: ../src/datain.c:1326
#: n:79
msgid "Negative adjusted tape reading"
msgstr "Lecture de longueur corrigée négative"

#: ../src/commands.c:1604
#: ../src/commands.c:1624
#: n:80
msgid "Date is in the future!"
msgstr "La date est dans le futur!"

#: ../src/commands.c:1628
#: n:81
msgid "End of date range is before the start"
msgstr "La date de fin est antérieure à celle de début"

#: ../src/avenprcore.cc:125
#: n:82
#, c-format
msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
msgstr "Le paramètre “%s” a une valeur incorrecte “%s” dans le fichier de configuration de l’imprimante"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
#. there is no station "entrance.27" in the centre-line.
#: ../src/netskel.c:1004
#: n:83
#, c-format
msgid "Cross section specified at non-existent station “%s”"
msgstr "Section spécifié sur une station inexistante “%s”"

#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
#. foresight and a clino reading for the backsight, or something similar.
#: ../src/datain.c:957
#: ../src/datain.c:978
#: n:84
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "Les mesures de CLINO et BACKCLINO doivent être du même type"

#: ../src/avenprcore.cc:120
#: n:85
#, c-format
msgid "Parameter “%s” missing in printer configuration file"
msgstr "Paramètres “%s” manquant dans le fichier de configuration de l’imprimante"

#: ../src/readval.c:522
#: n:86
msgid "Invalid month"
msgstr "Mois invalide"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/readval.c:530
#: n:87
msgid "Invalid day of the month"
msgstr "Jour du mois invalide"

#: ../src/cavern.c:237
#: n:88
#, c-format
msgid "3d file format versions %d to %d supported"
msgstr "Les fichiers au format 3d sont supportés des versions %d à %d"

#, c-format
#~ msgid "Error in format of font file “%s”"
#~ msgstr "Erreur dans le format du fichier de fontes “%s”"

#: ../src/readval.c:200
#: n:89
msgid "Expecting survey name"
msgstr "On attendait un nom de topographie"

#. TRANSLATORS: Program will exit shortly after printing this
#: ../src/message.c:224
#: n:90
msgid "Abnormal termination"
msgstr "Terminaison anormale"

#: ../src/message.c:225
#: n:91
msgid "Arithmetic error"
msgstr "Erreur arithmétique"

#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
#: ../src/message.c:226
#: n:92
msgid "Illegal instruction"
msgstr "Instruction illégale"

#: ../src/extend.c:536
#: ../src/mainfrm.cc:381
#: ../src/sorterr.c:140
#: n:93
#, c-format
msgid "Couldn’t open file “%s”"
msgstr "Ne peut pas ouvrir le fichier “%s”"

#: ../src/printwx.cc:587
#: n:402
#, c-format
msgid "Couldn’t write file “%s”"
msgstr "N’avons pas pu écrire le fichier “%s”"

#: ../src/message.c:227
#: n:94
msgid "Bad memory access"
msgstr "Mauvais accés mémoire"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:446
#: ../src/commands.c:509
#: ../src/commands.c:537
#: ../src/commands.c:1049
#: ../src/commands.c:1354
#: ../src/readval.c:96
#: n:95
msgid "Further uses of this deprecated feature will not be reported"
msgstr "Cette functionnalité n’est plus utilisée; les usages ultérieurs ne seront pas signalés."

#: ../src/message.c:228
#: n:97
msgid "Unknown signal received"
msgstr "Signal inconnu reçu"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/datain.c:862
#: n:98
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
msgstr "Les mesures de COMPASS et BACKCOMPASS diffèrent de %s degrés"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/datain.c:1026
#: n:99
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
msgstr "Les mesures de CLINO et BACKCLINO diffèrent de %s degrés"

#: ../src/cad3d.c:629
#: n:100
msgid "do not generate station markers"
msgstr "Ne pas générer de marqueurs station"

#: ../src/cad3d.c:630
#: n:101
msgid "do not generate station labels"
msgstr "Ne pas générer d'étiquettes station"

#: ../src/cad3d.c:631
#: n:102
msgid "do not generate survey legs"
msgstr "Ne pas générer de visées"

#: ../src/cad3d.c:635
#: n:103
msgid "produce an elevation view"
msgstr "Produire une vue en élévation"

#: ../src/commands.c:1046
#: n:104
#, c-format
msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
msgstr "“*data %s %c …” est obsololete - utiliser plutot “*data %s …”"

#: ../src/extend.c:490
#: n:105
msgid "Reading in data - please wait…"
msgstr "Lecture de données - attendez S.V.P. …"

#. TRANSLATORS: Perhaps the user tried to load a different type of file as a
#. Survex .3d file, or the .3d file was corrupted.
#: ../src/3dtopos.c:154
#: ../src/3dtopos.c:160
#: ../src/cad3d.c:873
#: ../src/cad3d.c:884
#: ../src/img_hosted.c:34
#: n:106
#, c-format
msgid "Bad 3d image file “%s”"
msgstr "Mauvais fichier image 3d “%s”"

#. TRANSLATORS: This is the date format string used to timestamp .3d files
#. internally.  Probably best to keep it the same for all translations.
#: ../src/img.c:43
#: ../src/mainfrm.cc:1344
#: n:107
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: put in .3d file if we can’t read the date/time
#: ../src/mainfrm.cc:1340
#: n:108
msgid "Date and time not available."
msgstr "Date et heure non disponibles."

#: ../src/img_hosted.c:35
#: n:109
#, c-format
msgid "Error reading from file “%s”"
msgstr "Erreur à la lecture du fichier “%s”"

#: ../src/filename.c:79
#: ../src/img_hosted.c:36
#: ../src/mainfrm.cc:339
#: ../src/mainfrm.cc:1834
#: n:110
#, c-format
msgid "Error writing to file “%s”"
msgstr "Erreur à l’écriture du fichier “%s”"

#: ../src/filename.c:82
#: n:111
msgid "Error writing to file"
msgstr "Erreur à l’écriture du fichier"

#: ../src/sorterr.c:76
#: ../src/sorterr.c:93
#: ../src/sorterr.c:164
#: n:112
msgid "Couldn’t parse .err file"
msgstr "La lecture du fichier .err a échoué"

#: ../src/cavern.c:380
#: n:113
#, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "Il y a %d avertissement(s) et %d erreur(s) - aucun fichier n’a été produit"

#: ../src/img_hosted.c:37
#: n:114
#, c-format
msgid "File “%s” has a newer format than this program can understand"
msgstr "Le fichier “%s” a un format plus récent que ce que ce"

#: ../src/printwx.cc:923
#: n:115
msgid "North"
msgstr "Nord"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printwx.cc:947
#: n:116
msgid "Elevation on"
msgstr "Elévation sur"

#: ../src/printwx.cc:419
#: n:117
msgid "P&lan view"
msgstr "&Vue en plan"

#: ../src/printwx.cc:421
#: n:285
msgid "&Elevation"
msgstr "&Elévation"

#: ../src/gfxcore.cc:692
#: ../src/mainfrm.cc:127
#: n:118
msgid "Elevation"
msgstr "Elévation"

#: ../src/cavern.c:342
#: n:120
msgid "Calculating statistics"
msgstr "Calcul des statistiques"

#: ../src/readval.c:485
#: n:121
msgid "Expecting string field"
msgstr "On attendait une chaine de caractères dans ce champ"

#: ../src/cmdline.c:208
#: n:122
msgid "too few arguments"
msgstr "pas assez d’arguments"

#: ../src/cmdline.c:215
#: n:123
msgid "too many arguments"
msgstr "trop d’arguments"

#: ../src/cmdline.c:174
#: ../src/cmdline.c:177
#: ../src/cmdline.c:181
#: n:124
msgid "FILE"
msgstr "FICHIER"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:163
#: n:125
msgid "Removing trailing traverses"
msgstr "Enlève les séquences terminales"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#: ../src/netskel.c:217
#: n:126
msgid "Concatenating traverses"
msgstr "Connecte les séquences"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#: ../src/netskel.c:410
#: n:127
msgid "Calculating traverses"
msgstr "Calcule les séquences"

#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
#. "sequence" for the English "traverse", which makes sense (although toporobot
#. actually uses this term to mean something more specific).  Feel free to
#. follow this lead if you can't think of a better term - these messages mostly
#. indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:742
#: n:128
msgid "Calculating trailing traverses"
msgstr "Calcule les séquences terminales"

#: ../src/network.c:82
#: n:129
msgid "Simplifying network"
msgstr "Simplification de réseau"

#: ../src/network.c:540
#: n:130
msgid "Calculating network"
msgstr "Calcul du réseau"

#: ../src/datain.c:1435
#: n:131
#, c-format
msgid "Found “%s”, expecting “F” or “B”"
msgstr "Vous avez écrit “%s”; on attendait “F” ou “B”"

#: ../src/cavern.c:438
#: n:132
#, c-format
msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
msgstr "Longueur totale de la topo = %7.2fm (%7.2fm adjusté)"

#: ../src/cavern.c:441
#: n:133
#, c-format
msgid "Total plan length of survey legs = %7.2fm"
msgstr "Longueur totale en projection horizontale = %7.2fm"

#: ../src/cavern.c:444
#: n:134
#, c-format
msgid "Total vertical length of survey legs = %7.2fm"
msgstr "Longueur totale verticale = %7.2fm"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:450
#: n:135
#, c-format
msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Interval vertical = %4.2fm (de %s à %4.2fm jusqu’à %s à %4.2fm)"

#. TRANSLATORS: c.f. previous message
#: ../src/cavern.c:451
#: n:136
#, c-format
msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Interval Nord-Sud = %4.2fm (de %s à %4.2fm jusqu’à %s à %4.2fm)"

#. TRANSLATORS: c.f. previous two messages
#: ../src/cavern.c:452
#: n:137
#, c-format
msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Interval Est-Ouest = %4.2fm (de %s à %4.2fm jusqu’à %s à %4.2fm)"

#: ../src/cavern.c:426
#: n:138
msgid "There is 1 loop."
msgstr "Il y a 1 bouclage."

#: ../src/cavern.c:428
#: n:139
#, c-format
msgid "There are %ld loops."
msgstr "Il y a %ld bouclages."

#: ../src/cavern.c:364
#: n:140
#, c-format
msgid "CPU time used %5.2fs"
msgstr "Temps CPU utilisé %5.2fs"

#: ../src/cavern.c:367
#: n:141
#, c-format
msgid "Time used %5.2fs"
msgstr "Temps utilisé %5.2fs"

#: ../src/cavern.c:369
#: n:142
msgid "Time used unavailable"
msgstr "Temps utilisé non disponible"

#: ../src/cavern.c:372
#: n:143
#, c-format
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "Temps utilisé %5.2fs (%5.2fs temps CPU)"

#: ../src/cavern.c:376
#: n:144
msgid "Done."
msgstr "Terminé."

#: ../src/netskel.c:720
#: n:145
#, c-format
msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
msgstr "Longueur originale %6.2fm (%3d visées), réduit à %6.2fm (%5.2fm/visées). "

#: ../src/netskel.c:723
#: n:146
#, c-format
msgid "Error %6.2f%%"
msgstr "Erreur %6.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
#. error per metre is meaningless
#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
#. the numbers in the message above.
#: ../src/netskel.c:725
#: n:147
msgid "Error    N/A"
msgstr "Erreur    N/A"

#: ../src/cad3d.c:632
#: n:148
#, c-format
msgid "generate grid (default %sm)"
msgstr "générer une grille (%sm par défaut)"

#: ../src/cad3d.c:633
#: n:149
#, c-format
msgid "station labels text height (default %s)"
msgstr "hauteur du texte dans les étiquettes station (%s par défaut)"

#: ../src/cad3d.c:634
#: n:152
#, c-format
msgid "station marker size (default %s)"
msgstr "taille des marqueurs station (%s par défaut)"

#: ../src/cad3d.c:636
#: n:155
#, c-format
msgid "factor to scale down by (default %s)"
msgstr "Facteur de réduction (%s par défaut)"

#: ../src/cad3d.c:637
#: n:156
msgid "produce DXF output"
msgstr "Produire une sortie DXF"

#: ../src/cad3d.c:638
#: n:158
msgid "produce Skencil output"
msgstr "Produire une sortie Skencil"

#: ../src/cad3d.c:639
#: n:159
msgid "produce Compass PLT output for Carto"
msgstr "Produire une sortie PLT Compass pour Carto"

#: ../src/cad3d.c:640
#: n:160
msgid "produce SVG output"
msgstr "Produire une sortie SVG"

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:137
#: n:150
msgid "display this help and exit"
msgstr "montrer ce message d’aide et quitter"

#. TRANSLATORS: description of --verbose option
#: ../src/cmdline.c:139
#: n:151
msgid "output version information and exit"
msgstr "affiche les informations sur la version et termine"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
#: ../src/cmdline.c:166
#: n:153
msgid "OPTION"
msgstr "OPTION"

#: ../src/mainfrm.cc:131
#: ../src/printwx.cc:371
#: ../src/printwx.cc:984
#: ../src/printwx.cc:1033
#: n:154
msgid "Scale"
msgstr "Échelle"

#: ../src/cmdline.c:190
#: n:157
#, c-format
msgid "Try “%s --help” for more information.\n"
msgstr "Pour en savoir davantage, faites: “%s --help”\n"

#: ../src/avenprcore.cc:269
#: n:166
#, c-format
msgid "Page %d of %d"
msgstr "Page %d sur %d"

#: ../src/avenprcore.cc:272
#: ../src/printwx.cc:1464
#: n:167
#, c-format
msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
msgstr "Topo “%s”   Page %d (sur %d)   En cours sur %s"

#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
#. something like "123°".  The bearing is up the page.
#: ../src/printwx.cc:929
#: n:168
#, c-format
msgid "Plan view, %s up page"
msgstr "Vue en plan, Azimuth %s vers le haut de l apage"

#. TRANSLATORS: This is used on printouts of elevations, with %s replaced by
#. something like "123°".  The bearing is the direction we’re looking.
#: ../src/printwx.cc:963
#: n:169
#, c-format
msgid "Elevation facing %s"
msgstr "Coupe projetée azimuth %s"

#. TRANSLATORS: This is used on printouts of tilted elevations, with the first
#. %s replaced by something like "123°", and the second by something like "-45°".
#. The bearing is the direction we’re looking.
#: ../src/printwx.cc:968
#: n:284
#, c-format
msgid "Elevation facing %s, tilted %s"
msgstr "Coupe projetée azimuth %s, tournée de %s"

#. TRANSLATORS: This is used on printouts of extended elevations.
#: ../src/printwx.cc:976
#: n:191
msgid "Extended elevation"
msgstr "Coupe développée"

#: ../src/cavern.c:412
#: n:172
msgid "Survey contains 1 survey station,"
msgstr "La topo contient 1 station,"

#: ../src/cavern.c:414
#: n:173
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "La topo contient %ld stations,"

#: ../src/cavern.c:418
#: n:174
msgid " joined by 1 leg."
msgstr " connectées par 1 visé."

#: ../src/cavern.c:420
#: n:175
#, c-format
msgid " joined by %ld legs."
msgstr " connectées par %ld visées."

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:182
#: n:176
msgid "node"
msgstr "nœud"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:182
#: n:177
msgid "nodes"
msgstr "nœuds"

#. TRANSLATORS: connected component in the graph theory sense
#. It means there are %ld bits of survey with no connections between them
#. This message is only used if there are more than 1
#: ../src/cavern.c:434
#: n:178
#, c-format
msgid "Survey has %ld connected components."
msgstr "La topo contient %ld composants connectés."

#. TRANSLATORS: Label for button in aven’s cavern log window which causes the
#. survey data to be reprocessed.
#: ../src/cavernlog.cc:397
#: ../src/cavernlog.cc:408
#: n:184
msgid "Reprocess"
msgstr "Recalculer"

#: ../src/cmdline.c:238
#: ../src/cmdline.c:257
#: n:185
#, c-format
msgid "numeric argument “%s” out of range"
msgstr "argument numérique “%s” hors limite"

#: ../src/cmdline.c:240
#: n:186
#, c-format
msgid "argument “%s” not an integer"
msgstr "l’argument “%s” n’est pas un entier"

#: ../src/cmdline.c:259
#: n:187
#, c-format
msgid "argument “%s” not a number"
msgstr "l’argument “%s” n’est pas un nombre"

#: ../src/commands.c:815
#: n:188
msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "On attendait “DUPLICATE”, “SPLAY”, ou “SURFACE”"

#: ../src/commands.c:818
#: n:189
msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "On attendait “NOT”, “DUPLICATE”, “SPLAY”, ou “SURFACE”"

#: ../src/listpos.c:82
#: n:190
#, c-format
msgid "Station “%s” referred to by *entrance or *export but never used"
msgstr "La station “%s” est citée dans un *entrance ou *export mais n’est jamais utilisée"

#: ../src/commands.c:617
#: n:192
msgid "No matching BEGIN"
msgstr "BEGIN manquant"

#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it’s
#. given at all
#: ../src/commands.c:639
#: n:193
msgid "Prefix tag doesn’t match BEGIN"
msgstr "Le préfixe du END ne correspond pas à celui du BEGIN"

#: ../src/commands.c:643
#: n:194
msgid "Closing prefix omitted from END"
msgstr "Préfixe manquant dans le END"

#. TRANSLATORS: heading line for .pos file
#. please try to ensure the “,”s (or at least the columns) are in the same place
#: ../src/3dtopos.c:109
#: n:195
msgid "( Easting, Northing, Altitude )"
msgstr "( X (Est), Y (Nord), Altitude )"

#. TRANSLATORS: bpp is "Bits Per Pixel"
#: ../src/aboutdlg.cc:172
#: n:196
#, c-format
msgid "Display Depth: %d bpp"
msgstr "Profondeur d’affichage: %d bpp"

#. TRANSLATORS: appended to previous message if the display is colour
#: ../src/aboutdlg.cc:173
#: n:197
msgid " (colour)"
msgstr " (couleur)"

#: ../src/readval.c:510
#: ../src/readval.c:520
#: ../src/readval.c:528
#: n:198
#, c-format
msgid "Expecting date, found “%s”"
msgstr "On attendait une date, on a trouvé “%s”"

#. TRANSLATORS: --help output for --survey option
#. "this" has been added to English translation
#: ../src/3dtopos.c:50
#: ../src/aven.cc:63
#: ../src/cad3d.c:628
#: ../src/diffpos.c:57
#: ../src/dump3d.c:49
#: ../src/extend.c:443
#: n:199
msgid "only load the sub-survey with this prefix"
msgstr "ne charge que la partie de topo avec le prefixe"

#. TRANSLATORS: --help output for aven --print option
#: ../src/aven.cc:64
#: n:119
msgid "print and exit (requires a 3d file)"
msgstr "Imprimer et quitter (nécessite un fichier 3d)"

#. TRANSLATORS: --help output for cavern --percentage option
#: ../src/cavern.c:122
#: n:161
msgid "display percentage progress"
msgstr "Afficher le pourcentage de progression"

#. TRANSLATORS: --help output for cavern --output option
#: ../src/cavern.c:123
#: n:162
msgid "set location for output files"
msgstr "Définir l’endroit pour les fichiers sortis"

#. TRANSLATORS: --help output for cavern --quiet option
#: ../src/cavern.c:124
#: n:163
msgid "only show brief summary (-qq for errors only)"
msgstr "Montrer seulement un bref résumé (-qq pour les erreurs seulement)"

#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
#: ../src/cavern.c:125
#: n:164
msgid "do not create .err file"
msgstr "Ne pas créer de fichier .err"

#. TRANSLATORS: --help output for cavern --warnings-are-errors option
#: ../src/cavern.c:126
#: n:165
msgid "turn warnings into errors"
msgstr "changer les avertissements en erreurs"

#. TRANSLATORS: --help output for cavern --log option
#: ../src/cavern.c:127
#: n:170
msgid "log output to .log file"
msgstr "enregistrer la sortie dans un fichier .log"

#. TRANSLATORS: --help output for cavern --3d-version option
#: ../src/cavern.c:128
#: n:171
msgid "specify the 3d file format version to output"
msgstr "spécifier la version du format de fichier 3d en sortie"

#. TRANSLATORS: --help output for sorterr --horizontal option
#: ../src/sorterr.c:52
#: n:179
msgid "sort by horizontal error factor"
msgstr "trier par facteur d’erreur horizontal"

#. TRANSLATORS: --help output for sorterr --vertical option
#: ../src/sorterr.c:53
#: n:180
msgid "sort by vertical error factor"
msgstr "trier par facteur d’erreur vertical"

#. TRANSLATORS: --help output for sorterr --percentage option
#: ../src/sorterr.c:54
#: n:181
msgid "sort by percentage error"
msgstr "trier par pourcentage d’erreur"

#. TRANSLATORS: --help output for sorterr --per-leg option
#: ../src/sorterr.c:55
#: n:182
msgid "sort by error per leg"
msgstr "trier par erreur par visée"

#. TRANSLATORS: --help output for sorterr --replace option
#: ../src/sorterr.c:56
#: n:183
msgid "replace .err file with resorted version"
msgstr "remplacer le fichier .err par la version assortie"

#. TRANSLATORS: --help output for dump3d --rewind option
#: ../src/dump3d.c:50
#: n:204
msgid "rewind file and read it a second time"
msgstr "rembobiner le fichier et le lire une seconde fois"

#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s meaningless to say
#. your tape is marked in "0 feet" (but you might measure distance by counting
#. knots on a diving line, and tie them every "2 feet").
#: ../src/commands.c:1280
#: n:200
msgid "*UNITS factor must be non-zero"
msgstr "*UNITS: le facteur doit être non nul"

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:746
#: n:201
msgid "&Screenshot…"
msgstr "&Copie d’écran…"

#: ../src/mainfrm.cc:1354
#: n:202
#, c-format
msgid "No survey data in 3d file “%s”"
msgstr "Pas de données topo dans le fichier image 3d “%s”"

#: ../src/gfxcore.cc:650
#: n:203
msgid "Facing"
msgstr "Direction"

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:69
#: n:205
#, c-format
msgid "About %s"
msgstr "A propos %s"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#.
#. File->Open dialog:
#: ../src/mainfrm.cc:1807
#: n:206
msgid "Select a survey file to view"
msgstr "Sélectionner un fichier de topo à afficher"

#: ../src/mainfrm.cc:1799
#: n:207
msgid "Survex 3d files"
msgstr "Fichiers de données Survex 3d"

#: ../src/mainfrm.cc:1804
#: ../src/mainfrm.cc:2213
#: ../src/printwx.cc:563
#: n:208
msgid "All files"
msgstr "Tous les fichiers"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:1798
#: n:229
msgid "All survey files"
msgstr "Tous les fichiers de topo"

#: ../src/mainfrm.cc:1800
#: n:329
msgid "Survex svx files"
msgstr "Fichiers svx Survex"

#: ../src/mainfrm.cc:1802
#: n:330
msgid "Compass DAT and MAK files"
msgstr "Fichiers MAK et DAT Compass"

#: ../src/printwx.cc:269
#: n:411
msgid "DXF files"
msgstr "fichiers DXF"

#: ../src/printwx.cc:270
#: n:412
msgid "EPS files"
msgstr "fichiers EPS"

#: ../src/printwx.cc:271
#: n:413
msgid "GPX files"
msgstr "fichiers GPX"

#: ../src/printwx.cc:272
#: n:414
msgid "HPGL for plotters"
msgstr "HPGL pour traceurs"

#: ../src/printwx.cc:273
#: n:415
msgid "Compass PLT for use with Carto"
msgstr "fichiers PLT Compass à utiliser avec Carto"

#: ../src/printwx.cc:274
#: n:416
msgid "Skencil files"
msgstr "fichiers Skencil"

#: ../src/printwx.cc:275
#: n:417
msgid "SVG files"
msgstr "fichiers SVG"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#.
#. This string is used in the about box (summarising the purpose of aven).
#: ../src/aboutdlg.cc:87
#: n:209
msgid "Survey visualisation tool"
msgstr "Outil de visualisation de topographies"

#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any accelerator key.
#. The accelerators must be different within this group
#: ../src/mainfrm.cc:872
#: n:210
msgid "&File"
msgstr "&Fichier"

#: ../src/mainfrm.cc:873
#: n:211
msgid "&Rotation"
msgstr "&Rotation"

#: ../src/mainfrm.cc:874
#: n:212
msgid "&Orientation"
msgstr "&Orientation"

#: ../src/mainfrm.cc:875
#: n:213
msgid "&View"
msgstr "&Vue"

#: ../src/mainfrm.cc:877
#: n:214
msgid "&Controls"
msgstr "&Contrôles"

#: ../src/mainfrm.cc:886
#: n:215
msgid "&Help"
msgstr "&Aide"

#: ../src/mainfrm.cc:879
#: n:216
msgid "&Presentation"
msgstr "&Présentation"

#: ../src/aboutdlg.cc:98
#: n:219
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "Ce programme est un logiciel libre; vous pouvez le redistribuer et/ou le modifier conformément aux dispositions de la Licence Publique Générale GNU, telle que publiée par la Free Software Foundation; version 2 de la licence, ou encore (à votre choix) toute version ultérieure."

#. TRANSLATORS: Part of 3dtopos --help
#: ../src/3dtopos.c:85
#: n:217
msgid "3D_FILE [POS_FILE]"
msgstr "FICHIER_3D [POS_FICHIER]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:261
#: n:218
msgid "FILE1 FILE2 [THRESHOLD]"
msgstr "FICHIER1 FICHIER2 [SEUIL]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:262
#: n:255
#, c-format
msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
msgstr "Les fichiers FICHIER1 et FICHIER2 peuvent êtres des fichiers .pos ou .3d\nLe SEUIL est le changement maxi. ignorable le long de n'importe quel axe en mètres (%s par défaut)"

#. TRANSLATORS: Part of extend --help
#: ../src/extend.c:464
#: n:267
msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
msgstr "FICHIER_D_ENTREE_3D [FICHIER_DE_SORTIE_3D]"

#. TRANSLATORS: Part of sorterr --help
#: ../src/sorterr.c:121
#: n:268
msgid "ERR_FILE [HOW_MANY]"
msgstr "FICHIER_D_ERREUR [NOMBRE]"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#.
#. Part of aven --help
#: ../src/aven.cc:106
#: ../src/aven.cc:130
#: n:269
msgid "[SURVEY_FILE]"
msgstr "[FICHIER_TOPOGRAPHIE]"

#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any accelerator key.
#. The string "\t" separates the menu text and any accelerator key.
#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:740
#: n:220
msgid "&Open…\tCtrl+O"
msgstr "&Ouvrir…\tCtrl+O"

#. TRANSLATORS: Used in the "colour key" for "colour by date" if there are
#. surveys without date information.
#: ../src/gfxcore.cc:931
#: n:221
msgid "Undated"
msgstr "Non datée"

#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
#. which aren’t part of a loop and so have no error information.
#: ../src/gfxcore.cc:953
#: n:290
msgid "Not in loop"
msgstr "Pas dans la boucle"

#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
#: ../src/commands.c:1134
#: n:222
msgid "NEWLINE can’t be the first reading"
msgstr "NEWLINE ne peut pas être la première valeur"

#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
#: ../src/commands.c:1169
#: n:223
msgid "NEWLINE can’t be the last reading"
msgstr "NEWLINE ne peut pas être la dernière valeur"

#. TRANSLATORS: error from "*data normal station tape compass clino"
#: ../src/commands.c:1191
#: n:224
msgid "Interleaved readings, but no NEWLINE"
msgstr "Données sur plusieurs lignes, mais pas de NEWLINE"

#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
#: ../src/commands.c:1078
#: n:225
#, c-format
msgid "Reading “%s” must occur before NEWLINE"
msgstr "La donnée “%s” doit apparaître avant NEWLINE"

#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
#: ../src/commands.c:1127
#: n:226
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "NEWLINE ne peut ê précédée que par STATION, DEPTH, et COUNT"

#: ../src/commands.c:1314
#: n:227
msgid "Can’t calibrate angular and length quantities together"
msgstr "On ne peut pas calibrer les angles et les longueurs en même temps"

#: ../src/commands.c:564
#: n:397
msgid "Bad *alias command"
msgstr "Commande illégale *alias"

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
#. height values).
#~ msgid "Select a terrain file to view"
#~ msgstr "Sélectionner un fichier de surface à visualiser"

#~ msgid "Terrain files"
#~ msgstr "Fichiers de surface"

#. TRANSLATORS: %s will be replaced by the application name ("Aven" currently)
#: ../src/log.cc:30
#: n:228
#, c-format
msgid "%s Error Log"
msgstr "Journal d’erreur de %s"

#. TRANSLATORS: Used in the "Export" settings dialog
#: ../src/printwx.cc:521
#: n:230
msgid "&Export…"
msgstr "&Exporter…"

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
#. Tickable menu item which toggles auto rotation
#: ../src/mainfrm.cc:759
#: n:231
msgid "Au&to-Rotate\tSpace"
msgstr "Rotation &Automatique\tSpace"

#: ../src/mainfrm.cc:761
#: n:232
msgid "Speed &Up"
msgstr "A&ccélère"

#: ../src/mainfrm.cc:762
#: n:233
msgid "Slow &Down"
msgstr "&Ralenti"

#: ../src/mainfrm.cc:764
#: n:234
msgid "&Reverse Direction"
msgstr "Direction &Inverse"

#: ../src/mainfrm.cc:766
#: n:235
msgid "Step Once &Anticlockwise"
msgstr "Pas à pas sens in&verse des aiguilles d’une montre"

#: ../src/mainfrm.cc:767
#: n:236
msgid "Step Once &Clockwise"
msgstr "Pas à pas dans le &sens des aiguilles d’une montre"

#. TRANSLATORS: View *looking* North
#: ../src/gfxcore.cc:3012
#: ../src/mainfrm.cc:770
#: n:240
msgid "View &North"
msgstr "Vue vers le &Nord"

#. TRANSLATORS: View *looking* East
#: ../src/gfxcore.cc:3013
#: ../src/mainfrm.cc:771
#: n:241
msgid "View &East"
msgstr "Vue vers l’&Est"

#. TRANSLATORS: View *looking* South
#: ../src/gfxcore.cc:3014
#: ../src/mainfrm.cc:772
#: n:242
msgid "View &South"
msgstr "Vue vers le &Sud"

#. TRANSLATORS: View *looking* West
#: ../src/gfxcore.cc:3015
#: ../src/mainfrm.cc:773
#: n:243
msgid "View &West"
msgstr "Vue vers l’&Ouest"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:775
#: n:244
msgid "Shift Survey &Left"
msgstr "Déplacement vers la &Gauche"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:776
#: n:245
msgid "Shift Survey &Right"
msgstr "Déplacement vers la &Droite"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:777
#: n:246
msgid "Shift Survey &Up"
msgstr "Déplacement vers le &Haut"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
#. it should be translated to the terminology that cavers using the language
#. would use.
#: ../src/mainfrm.cc:778
#: n:247
msgid "Shift Survey &Down"
msgstr "Déplacement vers le &Bas"

#: ../src/gfxcore.cc:3027
#: ../src/mainfrm.cc:780
#: n:248
msgid "&Plan View"
msgstr "Vue en &plan"

#: ../src/gfxcore.cc:3028
#: ../src/mainfrm.cc:781
#: n:249
msgid "Ele&vation"
msgstr "Elé&vation"

#: ../src/mainfrm.cc:783
#: n:250
msgid "&Higher Viewpoint"
msgstr "Point de vue plus Ha&ut"

#: ../src/mainfrm.cc:784
#: n:251
msgid "L&ower Viewpoint"
msgstr "Point de vue plus B&as"

#: ../src/mainfrm.cc:787
#: n:252
msgid "&Zoom In\t]"
msgstr "&Zoom Avant\t]"

#: ../src/mainfrm.cc:788
#: n:253
msgid "Zoo&m Out\t["
msgstr "Zoo&m Arrière\t["

#: ../src/mainfrm.cc:790
#: n:254
msgid "Restore De&fault View"
msgstr "&Restaurer la vue par défaut"

#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing" and
#. "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in the
#. "what to print" dialog.
#: ../src/printwx.cc:337
#: n:283
msgid "View"
msgstr "Vue"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn’t a
#. good name for this but nothing better has yet come to mind!
#: ../src/printwx.cc:338
#: n:256
msgid "Elements"
msgstr "Eléments"

#: ../src/printwx.cc:392
#: ../src/printwx.cc:727
#: n:257
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d pages (%dx%d)"

#. TRANSLATORS: used in the scale drop down selector in the print dialog
#. the implicit meaning is "choose a suitable scale to fit the
#. plot on a single page", but we need something shorter
#: ../src/printwx.cc:374
#: ../src/printwx.cc:746
#: n:258
msgid "One page"
msgstr "Une page"

#: ../src/mainfrm.cc:123
#: ../src/printwx.cc:405
#: n:259
msgid "Bearing"
msgstr "Azimut"

#: ../src/printwx.cc:439
#: n:260
msgid "Station Names"
msgstr "Noms de station"

#: ../src/printwx.cc:435
#: n:261
msgid "Crosses"
msgstr "Croisements"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:427
#: n:262
msgid "Underground Survey Legs"
msgstr "Visées sous terre"

#: ../src/printwx.cc:455
#: n:393
msgid "Cross-sections"
msgstr "Sections"

#: ../src/printwx.cc:460
#: n:394
msgid "Walls"
msgstr "Parois"

#: ../src/printwx.cc:464
#: n:395
msgid "Passages"
msgstr "Galeries"

#: ../src/printwx.cc:468
#: n:421
msgid "Origin in centre"
msgstr "Origine au centre"

#: ../src/printwx.cc:472
#: n:422
msgid "Full coordinates"
msgstr "Coordonnées complètes"

#. TRANSLATORS: Used in the print dialog:
#: ../src/printwx.cc:410
#: n:263
msgid "Tilt angle"
msgstr "Angle de basculement"

#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
#: ../src/printwx.cc:478
#: n:264
msgid "Page Borders"
msgstr "Bordures de page"

#. TRANSLATORS: As in the legend on a map.  Used in the print dialog - controls
#. drawing the box at the lower left with survey name, view angles, etc
#: ../src/printwx.cc:484
#: n:265
msgid "Legend"
msgstr "Légende"

#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
#. (otherwise they’ll be skipped to save paper)
#: ../src/printwx.cc:482
#: n:266
msgid "Blank Pages"
msgstr "Pages blanches"

#. TRANSLATORS: Items in the "View" menu:
#: ../src/mainfrm.cc:804
#: n:270
msgid "Station &Names\tCtrl+N"
msgstr "&Noms de station\tCtrl+N"

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:805
#: n:346
msgid "Passage &Tubes\tCtrl+T"
msgstr "Galeries &Tubulaires\tCtrl+T"

#: ../src/mainfrm.cc:806
#: n:271
msgid "&Crosses\tCtrl+X"
msgstr "&Croisements\tCtrl+X"

#: ../src/mainfrm.cc:807
#: n:297
msgid "&Grid\tCtrl+G"
msgstr "&Grille\tCtrl+G"

#: ../src/mainfrm.cc:808
#: n:318
msgid "&Bounding Box\tCtrl+B"
msgstr "&Bordures du cadre\tCtrl+B"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:810
#: n:272
msgid "&Underground Survey Legs\tCtrl+L"
msgstr "&Visées sous terre\tCtrl+L"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:811
#: n:291
msgid "&Surface Survey Legs\tCtrl+F"
msgstr "Segments de topo en S&urface\tCtrl+F"

#: ../src/mainfrm.cc:820
#: n:273
msgid "&Overlapping Names"
msgstr "&Superposition des noms"

#: ../src/gfxcore.cc:3050
#: ../src/mainfrm.cc:821
#: n:292
msgid "Colour by &Depth"
msgstr "Couleur par &profondeur"

#: ../src/gfxcore.cc:3051
#: ../src/mainfrm.cc:822
#: n:293
msgid "Colour by D&ate"
msgstr "Couleur par &date"

#: ../src/gfxcore.cc:3052
#: ../src/mainfrm.cc:823
#: n:289
msgid "Colour by E&rror"
msgstr "Cou&leur par Érreur"

#: ../src/mainfrm.cc:825
#: n:294
msgid "Highlight &Entrances"
msgstr "Mise en valeur des &entrées"

#: ../src/mainfrm.cc:826
#: n:295
msgid "Highlight &Fixed Points"
msgstr "Mise en valeur des points F&ixes"

#: ../src/mainfrm.cc:827
#: n:296
msgid "Highlight E&xported Points"
msgstr "Mise de valeur des points exp&ortés"

#: ../src/printwx.cc:443
#: n:418
msgid "Entrances"
msgstr "Entrées"

#: ../src/printwx.cc:447
#: n:419
msgid "Fixed Points"
msgstr "Points Fixes"

#: ../src/printwx.cc:451
#: n:420
msgid "Exported Stations"
msgstr "Points exportés"

#: ../src/mainfrm.cc:832
#: n:237
msgid "&Perspective"
msgstr "Pe&rspective"

#: ../src/mainfrm.cc:834
#: n:238
msgid "Textured &Walls"
msgstr "Te&xture des parois"

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
#. instead if it gives a better translation which most users will understand.
#: ../src/mainfrm.cc:835
#: n:239
msgid "Fade Distant Ob&jects"
msgstr "Rendre &floue les objets lointains"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:836
#: n:298
msgid "Smoot&hed Survey Legs"
msgstr "Lissage des segments topographi&ques"

#: ../src/mainfrm.cc:842
#: ../src/mainfrm.cc:846
#: n:356
msgid "Full Screen &Mode\tF11"
msgstr "&Mode Plein Ecran\tF11"

#: ../src/mainfrm.cc:860
#: n:274
msgid "&Compass"
msgstr "&Compas"

#: ../src/mainfrm.cc:861
#: n:275
msgid "C&linometer"
msgstr "C&lino"

#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/mainfrm.cc:862
#: n:276
msgid "Colour &Key"
msgstr "Couleur Cle&f"

#: ../src/mainfrm.cc:863
#: n:277
msgid "&Scale Bar"
msgstr "Barre de controle des &Echelles"

#: ../src/mainfrm.cc:855
#: n:280
msgid "&Reverse Sense\tCtrl+R"
msgstr "Sens &Inverse\tCtrl+R"

#: ../src/mainfrm.cc:830
#: ../src/mainfrm.cc:857
#: n:281
msgid "&Cancel Measuring Line\tEscape"
msgstr "&Annule la Ligne de Mesure\tEscape"

#: ../src/mainfrm.cc:864
#: n:299
msgid "&Indicators"
msgstr "I&ndicateurs"

#: ../src/z_getopt.c:695
#: ../src/z_getopt.c:707
#: n:300
#, c-format
msgid "%s: option “%s” is ambiguous\n"
msgstr "%s: l’option “%s” est ambigüe\n"

#: ../src/z_getopt.c:1023
#: ../src/z_getopt.c:1034
#: n:301
#, c-format
msgid "%s: option “-W %s” is ambiguous\n"
msgstr "%s: l’option “-W %s” est ambigüe\n"

#: ../src/z_getopt.c:751
#: ../src/z_getopt.c:755
#: n:302
#, c-format
msgid "%s: option “%c%s” doesn’t allow an argument\n"
msgstr "%s: l’option “%c%s” n’a pas d’argument\n"

#: ../src/z_getopt.c:740
#: ../src/z_getopt.c:743
#: n:303
#, c-format
msgid "%s: option “--%s” doesn’t allow an argument\n"
msgstr "%s: l’option “--%s” n’a pas d’argument\n"

#: ../src/z_getopt.c:1058
#: ../src/z_getopt.c:1069
#: n:304
#, c-format
msgid "%s: option “-W %s” doesn’t allow an argument\n"
msgstr "%s: l’option “-W %s” n’a pas d’argument\n"

#: ../src/z_getopt.c:790
#: ../src/z_getopt.c:802
#: ../src/z_getopt.c:1089
#: ../src/z_getopt.c:1101
#: n:305
#, c-format
msgid "%s: option “%s” requires an argument\n"
msgstr "%s: l’option “%s” requiert un argument\n"

#: ../src/z_getopt.c:960
#: ../src/z_getopt.c:971
#: ../src/z_getopt.c:1154
#: ../src/z_getopt.c:1166
#: n:306
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: cette option requiert un argument -- %c\n"

#: ../src/z_getopt.c:840
#: ../src/z_getopt.c:843
#: n:307
#, c-format
msgid "%s: unrecognized option “--%s”\n"
msgstr "%s: option “--%s” non reconnue\n"

#: ../src/z_getopt.c:851
#: ../src/z_getopt.c:854
#: n:308
#, c-format
msgid "%s: unrecognized option “%c%s”\n"
msgstr "%s: option “%c%s” non reconnue\n"

#: ../src/z_getopt.c:901
#: ../src/z_getopt.c:904
#: n:309
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: option illégale -- %c\n"

#: ../src/z_getopt.c:910
#: ../src/z_getopt.c:913
#: n:310
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: option invalide -- %c\n"

#: ../src/mainfrm.cc:793
#: n:311
msgid "&New Presentation"
msgstr "&Nouvelle Présentation"

#: ../src/mainfrm.cc:794
#: n:312
msgid "&Open Presentation…"
msgstr "&Ouvrir une Présentation…"

#: ../src/mainfrm.cc:795
#: n:313
msgid "&Save Presentation"
msgstr "&Sauver la Présentation"

#: ../src/mainfrm.cc:796
#: n:314
msgid "Sa&ve Presentation As…"
msgstr "Sau&ver la Présentation sous…"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:798
#: n:315
msgid "&Mark"
msgstr "&Marquer"

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:799
#: n:316
msgid "Pla&y"
msgstr "&Lecture"

#: ../src/mainfrm.cc:800
#: n:317
msgid "&Export as Movie…"
msgstr "&Exporter comme Animation…"

#: ../src/mainfrm.cc:2290
#: n:331
msgid "Export Movie"
msgstr "Exporter Film"

#: ../src/mainfrm.cc:326
#: n:319
msgid "Select an output filename"
msgstr "Sélection d’un nom de fichier de sortie"

#: ../src/mainfrm.cc:323
#: ../src/mainfrm.cc:2212
#: n:320
msgid "Aven presentations"
msgstr "Présentations Aven"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1820
#: n:321
msgid "Save Screenshot"
msgstr "Sauver la copie d’écran"

#: ../src/mainfrm.cc:2207
#: ../src/mainfrm.cc:2210
#: n:322
msgid "Select a presentation to open"
msgstr "Slectionner une présentation à ouvrir"

#: ../src/mainfrm.cc:405
#: n:323
#, c-format
msgid "Error in format of presentation file “%s”"
msgstr "Erreur de formatage du fichier de présentation “%s”"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave surveying package, so probably shouldn’t
#. be translated
#: ../src/mainfrm.cc:1801
#: n:324
msgid "Compass PLT files"
msgstr "Fichier Compass PLT"

#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying package, so don’t translate it.
#: ../src/mainfrm.cc:1803
#: n:325
msgid "CMAP XYZ files"
msgstr "Fichier CMAP XYZ"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1876
#: ../src/mainfrm.cc:2184
#: ../src/mainfrm.cc:2201
#: n:326
msgid "Modified Presentation"
msgstr "Présentation modifiée"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1875
#: ../src/mainfrm.cc:2183
#: ../src/mainfrm.cc:2200
#: n:327
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "La présentation en cours a été modifiée. Perte des changements non sauvés?"

#: ../src/mainfrm.cc:2501
#: ../src/mainfrm.cc:2510
#: n:328
msgid "No matches were found."
msgstr "Recherche infructueuse."

#~ msgid "Open &Terrain…"
#~ msgstr "Ouverture d’un &Terrain…"

#~ msgid "Solid Su&rface"
#~ msgstr "Surface S&olide"

#. TRANSLATORS: number of stations found matching search
#, c-format
#~ msgid "%d found"
#~ msgstr "%d trouvée(s)"

#. TRANSLATORS: "Find stations" button tooltip
#: ../src/mainfrm.cc:936
#: n:332
msgid "Find"
msgstr "Chercher"

#. TRANSLATORS: "Hide stations" button default tooltip
#: ../src/mainfrm.cc:937
#: ../src/mainfrm.cc:2542
#: n:333
msgid "Hide"
msgstr "Masquer"

#. TRANSLATORS: "Hide stations" button tooltip when stations are found
#: ../src/mainfrm.cc:2503
#: n:334
#, c-format
msgid "Hide %d found stations"
msgstr "Cacher %d stations trouvées"

#: ../src/mainfrm.cc:206
#: ../src/mainfrm.cc:1957
#: ../src/mainfrm.cc:2029
#: ../src/mainfrm.cc:2081
#: n:335
msgid "Altitude"
msgstr "Altitude"

#. TRANSLATORS: error if you try to drag multiple files to the aven window
#: ../src/mainfrm.cc:679
#: n:336
msgid "You may only view one 3d file at a time."
msgstr "Vous ne pouvez afficher qu’un fichier image 3d à la fois"

#: ../src/mainfrm.cc:865
#: n:337
msgid "&Side Panel"
msgstr "&Vue latérale"

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
#: ../src/mainfrm.cc:1955
#: ../src/mainfrm.cc:1977
#: ../src/mainfrm.cc:1979
#: ../src/mainfrm.cc:2080
#: n:338
msgid "%.2f E, %.2f N"
msgstr "%.2f E, %.2f N"

#. TRANSLATORS: Used in Aven:
#. From <stationname>
#. H: 123.45m V: 234.56m
#. Dist: 456.78m  Brg: 200
#: ../src/mainfrm.cc:1994
#: ../src/mainfrm.cc:2039
#: ../src/mainfrm.cc:2099
#: n:339
#, c-format
msgid "From %s"
msgstr "Depuis %s"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:2113
#: n:340
#, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "H %.2f%s, V %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:2123
#: n:341
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
msgstr "%s: %s, Dist %.2f%s, Azim %03d%s"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/gfxcore.cc:3041
#: ../src/gfxcore.cc:3056
#: ../src/mainfrm.cc:867
#: n:342
msgid "&Metric"
msgstr "&Métrique"

#. TRANSLATORS: tickable menu item in View menu.
#. Degrees are the angular measurement where there are 360 in a
#. full circle.
#: ../src/gfxcore.cc:3018
#: ../src/gfxcore.cc:3031
#: ../src/mainfrm.cc:868
#: n:343
msgid "&Degrees"
msgstr "&Degrés"

#. TRANSLATORS: abbreviation for "kilometres" (unit of length), used e.g.
#. "5km".  If there should be a space between the number and this, include one
#. in the translation.
#: ../src/gfxcore.cc:1021
#: ../src/printwx.cc:1025
#: n:423
msgid "km"
msgstr "km"

#. TRANSLATORS: abbreviation for "metres" (unit of length), used e.g. "10m".
#.
#. If there should be a space between the number and this, include one in the
#. translation.
#: ../src/gfxcore.cc:904
#: ../src/gfxcore.cc:1023
#: ../src/mainfrm.cc:1948
#: ../src/mainfrm.cc:2006
#: ../src/mainfrm.cc:2024
#: ../src/mainfrm.cc:2073
#: ../src/mainfrm.cc:2105
#: ../src/printwx.cc:1027
#: n:424
msgid "m"
msgstr "m"

#. TRANSLATORS: abbreviation for "centimetres" (unit of length), used e.g.
#. "50cm".
#.
#. If there should be a space between the number and this, include one in the
#. translation.
#: ../src/gfxcore.cc:1026
#: ../src/printwx.cc:1030
#: n:425
msgid "cm"
msgstr "cm"

#. TRANSLATORS: abbreviation for "miles" (unit of length, plural), used e.g.
#. "2 miles".
#.
#. If there should be a space between the number and this, include one in the
#. translation.
#: ../src/gfxcore.cc:1034
#: n:426
msgid " miles"
msgstr " milles"

#. TRANSLATORS: abbreviation for "mile" (unit of length, singular), used e.g.
#. "1 mile".
#.
#. If there should be a space between the number and this, include one in the
#. translation.
#: ../src/gfxcore.cc:1036
#: n:427
msgid " mile"
msgstr " mille"

#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g. as "10ft".
#.
#. If there should be a space between the number and this, include one in the
#. translation.
#: ../src/gfxcore.cc:904
#: ../src/gfxcore.cc:1039
#: ../src/mainfrm.cc:1953
#: ../src/mainfrm.cc:2009
#: ../src/mainfrm.cc:2027
#: ../src/mainfrm.cc:2078
#: ../src/mainfrm.cc:2110
#: n:428
msgid "ft"
msgstr "ft"

#. TRANSLATORS: abbreviation for "inches" (unit of length), used e.g. as "6in".
#.
#. If there should be a space between the number and this, include one in the
#. translation.
#: ../src/gfxcore.cc:1042
#: n:429
msgid "in"
msgstr "in"

#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
#: ../src/gfxcore.cc:3017
#: n:387
msgid "&Hide Compass"
msgstr "&Masquer le Compas"

#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
#: ../src/gfxcore.cc:3030
#: n:384
msgid "&Hide Clino"
msgstr "&Masquer le Clinomètre"

#. TRANSLATORS: Menu item which turns off the scale bar in aven.
#: ../src/gfxcore.cc:3040
#: n:385
msgid "&Hide scale bar"
msgstr "&Masquer l'échelle"

#. TRANSLATORS: Menu item which turns off the colour key.
#. The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/gfxcore.cc:3054
#: n:386
msgid "&Hide colour key"
msgstr "&Masquer l’échelle des couleurs"

#. TRANSLATORS: degree symbol - probably should be translated to itself.
#: ../src/mainfrm.cc:1998
#: ../src/mainfrm.cc:2117
#: ../src/printwx.cc:927
#: ../src/printwx.cc:952
#: ../src/printwx.cc:956
#: ../src/printwx.cc:960
#: ../src/printwx.cc:967
#: n:344
msgid "°"
msgstr "°"

#. TRANSLATORS: alternative angle units (400 grad = 360 degrees = full circle).
#. Try to make this as short as sensibly possible.
#.
#. E.g. in Italian and Spanish we use "g.cent." rather than
#. "gradi quattrocentesimali"/"grados centesimales"
#: ../src/mainfrm.cc:2001
#: ../src/mainfrm.cc:2120
#: n:345
msgid "grad"
msgstr "grade"

#: ../src/mainfrm.cc:850
#: n:347
#~ msgid "&Preferences…"
#~ msgstr "&Préférences…"

#: n:348
#~ msgid "Draw passage walls"
#~ msgstr "Déssiner les parois"

#: n:349
#~ msgid "Estimate LRUD readings based on heuristics"
#~ msgstr "Estimation heuristique des dimensions de galerie"

#: n:350
#~ msgid "Mark survey stations with crosses"
#~ msgstr "Marquer les stations par une croix"

#: n:351
#~ msgid "Highlight stations marked as entrances"
#~ msgstr "Montrer les entrées"

#: n:352
#~ msgid "Highlight stations marked as fixed points"
#~ msgstr "Montrer les points fixes"

#: n:353
#~ msgid "Highlight stations which are exported"
#~ msgstr "Montrer les stations exportées"

#: n:354
#~ msgid "Mark survey stations with their names"
#~ msgstr "Afficher les stations par leurs noms"

#: n:355
#~ msgid "Allow names to overlap on the display (faster)"
#~ msgstr "Permettre aux noms de se recouvrir (affichage plus rapide)"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:357
#~ msgid "Display underground survey legs"
#~ msgstr "Afficher les visées sous-terraines"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:358
#~ msgid "Display surface survey legs"
#~ msgstr "Afficher les visées de surface"

#: n:359
#~ msgid "Colour surface surveys by depth"
#~ msgstr "Couleur de la topo de surface en fonction de l’altitude"

#: n:360
#~ msgid "Draw surface legs with dashed lines"
#~ msgstr "Représenter les visées de surfaces par des pointillés"

#: n:361
#~ msgid "Draw a grid"
#~ msgstr "Afficher une grille"

#: n:362
#~ msgid "metric units"
#~ msgstr "mètres"

#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
#. the USA (rather confusingly now that England has largely gone metric!)
#: n:363
#~ msgid "imperial units"
#~ msgstr "mesures anglaises"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: n:364
#~ msgid "degrees (°)"
#~ msgstr "degrés (°)"

#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
#. full circle.
#: n:365
#~ msgid "grads"
#~ msgstr "grades"

#: n:366
#~ msgid "Display measurements in"
#~ msgstr "Afficher les distances en"

#: n:367
#~ msgid "Display angles in"
#~ msgstr "Afficher les angles en"

#. TRANSLATORS: reverses the sense of the mouse controls
#: n:368
#~ msgid "Reverse the sense of the controls"
#~ msgstr "Inverser le sens des contrôles"

#: n:369
#~ msgid "Display scale bar"
#~ msgstr "Afficher l’échelle"

#: n:370
#~ msgid "Display depth bar"
#~ msgstr "Afficher la barre de profondeur"

#: n:371
#~ msgid "Display compass"
#~ msgstr "Afficher la boussole"

#: n:372
#~ msgid "Display clinometer"
#~ msgstr "Afficher le clinomètre"

#: n:373
#~ msgid "Display side panel"
#~ msgstr "Afficher le panneau latéral"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
#: ../src/mainfrm.cc:2011
#: n:374
#, c-format
msgid "%s: H %.2f%s, Brg %03d%s"
msgstr "%s: H %.2f%s, Azim %03d%s"

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:2044
#: n:375
#, c-format
msgid "%s: V %.2f%s"
msgstr "%s: V %.2f%s"

#. TRANSLATORS: labels for tabbed side panel
#. this is for the tab with the tree hierarchy of survey station names
#: ../src/mainfrm.cc:988
#: n:376
msgid "Surveys"
msgstr "Topographies"

#: ../src/mainfrm.cc:989
#: n:377
msgid "Presentation"
msgstr "Présentation"

#: ../src/mainfrm.cc:204
#: n:378
msgid "Easting"
msgstr "Est"

#: ../src/mainfrm.cc:205
#: n:379
msgid "Northing"
msgstr "Nord"

#: ../src/mainfrm.cc:743
#: n:380
msgid "&Print…\tCtrl+P"
msgstr "&Imprimer…\tCtrl+P"

#: ../src/mainfrm.cc:744
#: n:381
msgid "P&age Setup…"
msgstr "Configurer la &page…"

#: ../src/mainfrm.cc:747
#: n:382
msgid "&Export as…"
msgstr "&Exporter sous…"

#. TRANSLATORS: Title of file dialog to choose name and type of exported file.
#: ../src/printwx.cc:567
#: n:401
msgid "Export as:"
msgstr "Exporter en tant que:"

#. TRANSLATORS: Title of the export dialog
#: ../src/printwx.cc:287
#: n:383
msgid "Export"
msgstr "Exporter"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:134
#: n:390
msgid "System Information:"
msgstr "Système d’information:"

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printwx.cc:606
#: n:398
msgid "Print Preview"
msgstr "Aperçu avant impression"

#. TRANSLATORS: Title of the print dialog
#: ../src/printwx.cc:287
#: n:399
msgid "Print"
msgstr "Imprimer"

#: ../src/printwx.cc:518
#: n:400
msgid "&Print…"
msgstr "&Imprimer…"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:431
#: n:403
msgid "Sur&face Survey Legs"
msgstr "Segments de topo en Sur&face"

#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:96
#: n:404
msgid "Edit Waypoint"
msgstr "Éditer un waypoint"

#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:133
#: n:278
msgid " (unused in perspective view)"
msgstr " (non utilisé dans la vue en perspective)"

#. TRANSLATORS: Field label in dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:138
#: n:279
msgid "Time: "
msgstr "Temps: "

#. TRANSLATORS: units+info after time field in dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:140
#: n:282
msgid " secs (0 = auto; *6 = 6 times auto)"
msgstr " secs (0 = auto; *6 = 6 fois auto)"

#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
#. things in future).
#: ../src/aven.cc:219
#: n:405
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn’t available."
msgstr "Cette version de %s a besoin d’OpenGL pour fonctionner, mais il n’est pas disponible."

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:158
#: n:500
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr "Déplacement de (%3.2f,%3.2f,%3.2f): %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:194
#: n:501
#, c-format
msgid "Added: %s"
msgstr "Ajout de: %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:216
#: n:502
#, c-format
msgid "Deleted: %s"
msgstr "Effacé: %s"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this station, but we didn’t find it in the 3d file
#: ../src/extend.c:258
#: ../src/extend.c:275
#: ../src/extend.c:315
#: ../src/extend.c:355
#: ../src/extend.c:395
#: n:510
#, c-format
msgid "Failed to find station %s"
msgstr "La station %s n’a pas été trouvée"

#. TRANSLATORS: for extend:
#. the user specified breaking a loop or changing extend direction at
#. this leg, but we didn’t find it in the 3d file
#: ../src/extend.c:297
#: ../src/extend.c:337
#: ../src/extend.c:377
#: ../src/extend.c:417
#: n:511
#, c-format
msgid "Failed to find leg %s → %s"
msgstr "Visée %s → %s non trouvé"

#. TRANSLATORS: for extend:
#. "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:252
#: n:512
#, c-format
msgid "Starting from station %s"
msgstr "Début à la station %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:268
#: n:513
#, c-format
msgid "Extending to the left from station %s"
msgstr "Extension vers la gauche en partant de la station %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:308
#: n:514
#, c-format
msgid "Extending to the right from station %s"
msgstr "Extension vers la droite en partant de la station %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:287
#: n:515
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr "Extension vers la gauche en partant de la visée %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:327
#: n:516
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr "Extension vers la droite en partant de la visée %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:388
#: n:517
#, c-format
msgid "Breaking survey loop at station %s"
msgstr "Coupure de la boucle à la station %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:407
#: n:518
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr "Coupure de la boucle à la visée %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:348
#: n:519
#, c-format
msgid "Swapping extend direction from station %s"
msgstr "Change la direction de la coupe développée à partir de la station %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:367
#: n:520
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr "Change la direction de la coupe développée à partir de la visée %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:533
#: n:521
#, c-format
msgid "Applying specfile: “%s”"
msgstr "Application du fichier de spécification: “%s”"

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:593
#: n:522
#, c-format
msgid "Writing %s…"
msgstr "Écriture de %s…"

#: ../src/findentrances.cc:100
#: ../src/gpx.cc:70
#: n:287
#, c-format
msgid "Failed to initialise input coordinate system “%s”"
msgstr "Échec à l'initialisation du système de coordonnées d’entrée “%s”"

#: ../src/findentrances.cc:103
#: ../src/gpx.cc:76
#: n:288
#, c-format
msgid "Failed to initialise output coordinate system “%s”"
msgstr "Échec à l'initialisation du système de coordonnées de sortie “%s”"

#: ../src/findentrances.cc:155
#: n:388
msgid "-d PROJ_DATUM 3D_FILE"
msgstr "-d PROJ_DATUM FICHIER_3D"

#. TRANSLATORS: The findentrances utility uses the PROJ library to do
#. coordinate transformations (https://trac.osgeo.org/proj/) - you
#. pass findentrances a string to tell PROJ what the input datum is.
#: ../src/findentrances.cc:146
#: ../src/printwx.cc:496
#: n:389
msgid "input datum as string to pass to PROJ"
msgstr "données (chaine de caractères) à passer à PROJ"

#: ../src/readval.c:338
#: n:392
msgid "Separator in survey name"
msgstr "Séparateur dans le nom de la topo"

#: ../src/readval.c:124
#: ../src/readval.c:139
#: ../src/readval.c:156
#: n:3
msgid "Can't have a leg between two anonymous stations"
msgstr "Impossible d'avoir une visée entre deux stations anonymes"

#: ../src/dump3d.c:51
#: n:396
msgid "show survey date information (if present)"
msgstr "montrer la date de la topo (si présente)"

#: ../src/mainfrm.cc:817
#: n:406
msgid "Spla&y Legs"
msgstr "Visées l&atérales"

#: ../src/mainfrm.cc:814
#: n:407
msgid "&Hide"
msgstr "Mas&quer"

#: ../src/mainfrm.cc:815
#: n:408
msgid "&Fade"
msgstr "&Obscurcir"

#: ../src/mainfrm.cc:816
#: n:409
msgid "&Show"
msgstr "&Montrer"

#: ../src/printwx.cc:346
#: n:410
msgid "Export format"
msgstr "Format d'exportation"