source: git/debian/changelog @ 816554b

survex (1.1.5) unstable; urgency=low

  * aven: Make blobs round like they are in Survex 1.0.
  * aven: If the graphics drivers don't support drawing blobs using OpenGL
    point markers, fall back to drawing filled circles.
  * aven: If the graphics drivers support it, draw crosses as texture mapped
    OpenGL point markers which is much faster.
  * aven: Cross size increased to match Survex 1.0.
  * aven: We must update which blobs are displayed if display of surface or
    underground legs is toggled.
  * cavern: Fix handling of a *solve followed by survey data, none of which is
    attached to the previous data.
  * cavern: Fixed "No survey data" error when a *solve is followed by another
    *solve (or the implicit solve at the end of processing) with no data between
    them.

 -- Wookey <wookey@survex.com>  Tue, 20 Sep 2005 15:08:53 +0100

survex (1.1.4) unstable; urgency=low

  * aven: Added Aven's icon to the "About" dialog.
  * aven: Use localised character for the decimal point (e.g. "," in most
    continental European countries).
  * aven: Previously the survey tree would get focus and then take keypresses
    (e.g. "P", "L", "Delete").  Now we pass most keypresses across so they
    operate on the cave, and transfer the input focus across when we do.
  * aven: Make pressing "Return" in the tree control expand/collapse a
    subtree.
  * aven: Speed up intialisation by delaying creation of OpenGL lists until
    they're needed.
  * aven: Added Mark Shinwell's bounding box with shadow of the survey.
  * aven: Disable the "Tubes" button/menu item when there's no LRUD data.
  * aven: Reworded "Restore Default Settings" as "Restore Default View".
  * aven: Set sensible default margins for printing and preserve any margin
    values the user specifies between runs (previously margins defaulted to 0
    each time aven was run).
  * Documentation: Document *DATA PASSAGE in the manual.

 -- Wookey <wookey@survex.com>  Sat, 17 Sep 2005 21:34:57 +0100

survex (1.1.3) unstable; urgency=low

  * cavern: Allow OMIT character (-) for left/right/up/down.
  * aven: Remove an unnecessary menu separator.
  * aven: Fix "Find" and "Hide" toolbar buttons to work with GTK2.0.
  * aven: Make the tooltip for "Hide" show the number of found stations.
  * aven: If * or ? is used in a glob-style pattern, force a non-substring
    match.
  * aven: Enable "New Presentation" when there's a 3d file loaded, rather than
    when there's a presentation loaded.
  * aven: Make entrances green in side panel tree list to match green blobs used
    in cave view.
  * aven: Don't show surface labels if we're not showing surface data, etc.
  * aven: Merge "Start Rotation" and "Stop Rotation" into "Toggle Rotation" and
    make "Space" the key for this.  Keep Return working "Stop Rotation" so
    existing users are happy, but don't advertise it.
  * aven: Normalise filename by adding any extension used, and use the
    normalised filename for file history and window title.
  * aven: Stop setting extra toolbar margin when using GTK2.0 as the toolbar
    buttons already have a sensible margin - the extra margin is only needed
    with GTK1.2.
  * aven: Fix handling of plumb legs in tube model.
  * aven: Fixed swapped L and R in tube model.
  * extend: Preserve UD cross-section information in extended elevation.
  * extend: Add new messages for John Pybus' enhancements.

 -- Wookey <wookey@survex.com>  Wed, 07 Sep 2005 00:33:01 +0100

survex (1.1.2) experimental; urgency=low

  * Added support for LRUD data in .svx files, in .3d files, and aven can
    now load and display it on screen and on printouts.  The ability to "fake"
    LRUD data in aven is gone for now but will reappear in some form later.
  * cavern: Removed support for writing Chasm's 3dx format.  We're going to
    fold any desirable missing chasm functionality into aven.
  * aven: Rearranged mouse actions as discussed on the mailing list.  Added
    cursors for each different mouse action to help the user learn what each
    does.  Also added cursors for the "compass" and "clino" as well as the
    scalebar to suggest to the user that they can be dragged to change the view.
  * aven: Don't segfault on Unix if LANG isn't a known language.
  * tests/smoketest.tst: If X windows is running, check that we can run aven
    with --help and --version.
  * tests/cavern.tst: Fixed cavern.tst to warn if it is skipping a test because
    no results are listed for it.  This revealed that there was a "newline" test
    which should have been called "newline", and was a broken testcase too!
    Fixed all these problems.
  * cavern: Applied Simeon Warner's patch for handling backcompass, backclino,
    and omitted forward compass/clino readings in Compass DAT files.  Added
    a feature test for this to the testsuite.
  * It no longer makes sense to have an option not to build aven or to build
    aven without OpenGL so remove old machinery for this from configure and
    the sources.
  * configure: Check if "-lXxf86vm" is needed on UNIX.
  * configure: Better output for strcasecmp test.
  * aven: Fix crosses to work much better.  Not a total fix - their position
    in the Z buffer isn't correct and they're rather slow to plot.
  * aven: Don't regenerate the hittest grid every time the mouse moves while
    animating, which solves the mysterious pausing effect (thanks go to Martin
    Green for spotting this!)  Also clear all the status bar coordinates when
    animating.
  * aven: Sort out clashing menu shortcuts in some languages.
  * aven: Fixed compilation problem on x86_64
  * SPUD: Pruned out stuff which has been done or which is not actually relevant
    to this branch.
  * Merge various changes from 1.0 branch:
    + aven: Port over "printing from aven" functionality.
    + aven: Port over "export as" functionality,
    + Add David Loeffler's vim mode for .svx files.
  * aven: Fix check for whether a label is behind us in perspective view.
  * aven: Don't use an opengl list for drawing the indicators - we typically
    make a new list each time we plot them anyway.
  * Remove lingering traces of support for RISC OS and pre-386 MSDOS
  * aven: Set icon on non-Windows platforms too.  This means that with
    WindowMaker on UNIX you get an icon on the AppIcon by default.
  * configure: Update wxWindows checks to handle newer wx versions.
  * Make all maintainer perl scripts "use bytes;" to avoid utf-8 double
    encoding problems.  They also all require Perl 5.8 now (hopefully this
    isn't an issue for anyone building from CVS).
  * acinclude.m4: Quote macro name for fix autotools warning.
  * doc/aven.sgml: "tilt up" is "'" not ",".
  * aven: Add support for mousewheels (to tilt the cave).
  * aven: Fixed twisted transitions to and from pitches in certain cases.
  * aven: Pick a sensible initial window size when the user's desktop is
    spread over more than one monitor (works best with wx2.5 or newer, but try
    to do better with wx2.4 or earlier as well).
  * aven: Initialise GfxCore slightly later to avoid visual glitch from notebook
    contents being visible before any survey is loaded.
  * aven: Allow a coloured texture to be used
  * aven: Don't initialise until we have data (to the user, this means the
    window is default colour (grey for most systems) not black until a survey
    is loaded).
  * aven: Fixed weird "shadowed" icons.

 -- Wookey <wookey@survex.com>  Fri, 15 Jul 2005 21:16:30 +0100

survex (1.1.1) experimental; urgency=low

  * aven: Delay loading the bitmap for the "About" dialog until it is first
    needed.  We want start up to be as quick as possible.

 -- Wookey <wookey@survex.com>  Tue, 05 Oct 2004 02:42:30 +0100

survex (1.1.0) experimental; urgency=low

  * aven: Now uses OpenGL for 3d rendering.
  * aven: Solid passages - passage dimensions are currently inferred from
    the leg length (pretty effective as you can measure longer legs in
    larger passages).  Use of real LRUD data coming soon...
  * aven: Depth colouring is now continuously varying.
  * aven: Colour by depth can now be turned off (and there's the start of a
    framework for properly implementing colour by date, error, etc).
  * aven: Find stations moved onto the toolbar and now uses a simple wildcarded
    match (? matches any character, * matches any number of characters).
  * aven: We now use the status bar for coordinates, distances, etc to make
    better use of screen space.
  * aven: Full screen mode (F11).
  * aven: Perspective view.
  * aven: Context sensitive cursor shape - needs more work.
  * aven: Mouse actions changed (hopefully they're now more natural, but
    you may find the change disorientating - feedback wanted on this).
  * aven: Added "presentations" which allow you to set up fly-through paths
    and load/save/run them.
  * aven: A presentation can be exported as a movie file.
  * aven: Added Save screenshot facility.
  * aven: Depth fogging option.
  * aven: Added Smooth Lines option.
  * aven: Added Textured Walls option.
  * aven: If a survey has surface legs but no underground legs, default to
    showing the surface legs.
  * cavern: Dates given to *date are now stored in the 3d file.

 -- Wookey <wookey@survex.com>  Fri, 01 Oct 2004 21:24:12 +0100

survex (1.0.32) unstable; urgency=low

  * aven: Fixed font sizes in "Print Preview".
  * aven: In the print setup dialog, replaced "Orientation" radio buttons with
    "Plan" and "Elevation" buttons.
  * aven: Fixed info box on printouts of elevations, tilted views, and
    extend elevations.
  * aven: Added "fit on one page" option, and make it the default.
  * aven: Reorder "Cancel", "Preview", "Print" buttons and make "Print" the
    default button.
  * aven: Read settings back from the print dialog when the "Print" button is
    pressed (was only done for "Preview" previously).
  * aven: Sorted out the initial size of the "Print Preview" window.
  * aven: Fixed the window manager's close button on the "Print Preview"
    window - previously this was being ignored.
  * aven: Sorted out initial survey scaling when loading a survey at startup.
  * aven: Fixed the measuring line to work better when the survey tree is
    manipulated with keys.  Tweaked redrawing of the measuring line to be a
    smidgen more efficient.  Fixed the blob and ring size which were one
    pixel too small on Windows.
  * aven: Added "System Information:" section to the "About" dialog to hold
    information useful when reporting bugs.  Currently it contains the
    wxWindows version, OS version, and colour depth information.
  * aven: Changed the "About" dialog's "Close" button to be "OK" for
    consistency with pretty much every other application.
  * aven: Added "File->Export as..." which integrates cad3d's functionality
    within aven.
  * aven: Updated a few icons.
  * cad3d: Added SVG export support from John Pybus
  * Fixed to allow compilation with GCC 3.4
  * Updates to German translation.

 -- Wookey <wookey@survex.com>  Thu, 30 Sep 2004 23:07:39 +0100

survex (1.0.31) unstable; urgency=low

  * aven: Fixed grid menu item so that it always correctly reflects whether
    the grid is enabled or not.
  * aven: Minor improvements to appearance of a few toolbar icons.
  * Updates to Catalan, French, Italian, Romanian, Slovak, and Spanish
    translations.
  * cavern: Fixed Romanian message which was appearing in English .err files.

 -- Wookey <wookey@survex.com>  Thu, 01 Jul 2004 01:36:19 +0100

survex (1.0.30) unstable; urgency=low

  * aven: Added printing directly from Aven!
  * aven: Fixed memory leak when showing the "About" dialog.
  * cavern: Equates are no longer considered when deciding which stations are
    flagged as surface and underground.
  * Romanian translation mostly completed.
  * Minor packaging tweaks (added website URL and changed package descriptions
    to start with a lowercase letter as suggested by packaging guidelines).

 -- Wookey <wookey@survex.com>  Sat, 29 May 2004 23:01:13 +0100

survex (1.0.29) unstable; urgency=low

  * cad3d: Fixed problem with DXF files which stopped them loading with some
    drawing packages (introduced in 1.0.27).
  * aven: Changed File->Exit to File->Quit.
  * Removed some unused messages from the message files.
  * Romanian translation started.
  * Fixed a few new lintian warnings.
  * Fixed new lintian warnings about missing quotes in menu files.

 -- Wookey <wookey@survex.com>  Mon, 19 Mar 2004 14:55:23 +0000

survex (1.0.28) unstable; urgency=low

  * Fixed 3d file reading code to fix incorrect unpacking of compressed
    station names in a rare case.  Also checked other rare cases work
    correctly.

 -- Wookey <wookey@survex.com>  Mon, 08 Mar 2004 20:54:03 +0000

survex (1.0.27) unstable; urgency=low

  * cad3d: DXF output now puts surface legs, stations, and labels in separate
    layers.
  * debian/control,debian/rules: The default gcc/g++ is now c102 so removed
    code to explicitly use GCC 3.2.

 -- Wookey <wookey@survex.com>  Wed, 07 Jan 2004 03:27:58 +0000

survex (1.0.26) unstable; urgency=low

  * Standards-Version: 3.6.1 (no changes).
  * Fixed lintian warning.
  * Tidied up debian/rules.
  * cavern: Fixed interleaved topofil data style - the length was always being
    calculated as zero.
  * aven: "All Files" now shows files without extensions too.
  * aven: added Ctrl+Q as shortcut for File->Exit.
  * aven: depth colouring now uses a proper colour gradient.
  * cad3d: fixed -e and -r options to not crash (the long versions have always
    worked).
  * extend: fixed to initialise an internal structure - failing to do so was
    probably causing crashes on some platforms.
  * Fixed standard graphics for "Note", "Warning", etc in the PostScript manual.
  * Documentation updated.
  * fixed svxedit man page which previously contained xcaverot documentation!
  * test suite: check that cavern doesn't report "nan" or "NaN" for any values.

 -- Wookey <wookey@survex.com>  Sat, 29 Nov 2003 00:40:24 +0000

survex (1.0.25) unstable; urgency=low

  * Updated config.guess and config.sub (closes: bug#186687).
  * Added missing Build-Depends on xlibs-dev (closes: bug#186956).

 -- Wookey <wookey@survex.com>  Mon, 31 Mar 2003 17:49:29 +0100

survex (1.0.24) unstable; urgency=low

  * cavern: fixed LEVEL (broken since around 1.0.8) and added test case.
  * cavern: corrected handling of declination in Compass DAT files and added
    test case; also added tests for other aspects of Compass DAT file
    reading.
  * printps/printpcl: fixed blank page detection in some obscure cases.
  * Documentation: started manual section on working with Compass data files.
  * Added Build-Depends on gcc-3.2 and g++-3.2.

 -- Wookey <wookey@survex.com>  Fri, 28 Mar 2003 02:03:16 +0000

survex (1.0.23) unstable; urgency=low

  * Documentation: include 3d v3 file format description on MS Windows, MS
    DOS, and RISC OS too; include PNG graphics for manual on MS Windows; minor
    updates to manual.
  * Prefer wxWindows 2.4 if it's available (closes: bug#183158).
  * Disabled experimental support for Chinese (LANG=zh) - it isn't currently
    working and makes the printer drivers unusable when LANG is set to zh.
  * Changed Section from math to science.
  * Changed Priority from optional to extra (we clearly should be optional).
  * Standards-Version: 3.5.8.0 (support DEB_BUILD_OPTIONS).

 -- Wookey <wookey@survex.com>  Tue, 04 Mar 2003 20:54:17 +0000

survex (1.0.22) unstable; urgency=low

  * aven: Fixed handling of extended elevations (and other flat surveys).
  * Documentation: fixed 3d v3 file format description and include it in debs.
  * Build-Depends on libwxgtk2.3-dev|libwxgtk2.2-dev so we still build on
    hppa while Ron Lee resolves the wx hppa build failure.

 -- Wookey <wookey@survex.com>  Tue, 26 Nov 2002 04:22:26 +0000

survex (1.0.21) unstable; urgency=low

  * cavern: when reading Compass DAT files, we now processes compass and clino
    backsights, and recognise the "X" flag which indicates a leg should be
    entirely ignored.  And we now report correct line number with errors in
    Compass .MAK files.
  * cavern: if "*infer plumbs on", don't infer a plumb if the clino is
    +/- 90 degrees, but the backclino isn't (and vice versa).
  * cavern: fixed 3dx output so it actually works with Chasm once more.
  * cavern: don't allocate extra space needed for producing 3dx output for
    Chasm unless we're actually producing that output - saves about 8 bytes
    per station.
  * cavern: removed slightly too keen sanity check which could misfire in very
    unusual circumstances.

 -- Wookey <wookey@survex.com>  Sat, 16 Nov 2002 15:15:12 +0000

survex (1.0.20) unstable; urgency=low

  * aven: update display when "Metric" or "Degrees" is toggled.
  * cavern: fixed handling of compass and clino corrections in Compass survey
    data - these were interpreted as radians rather than degrees so the
    correction was about 57 times too large!)
  * Improved handling of Compass PLT files - if the survey name is empty, don't
    insert a survey separator character.
  * Documentation: fixed incorrect markup which resulted in a bogus footnote.
  * Use wxwindows-2.3 rather than wxwindows-2.2 (closes: bug#166105).

 -- Wookey <wookey@survex.com>  Fri, 01 Nov 2002 15:28:37 +0000

survex (1.0.19) unstable; urgency=low

  * cavern: can now process Compass format survey data, and even mixed
    datasets.
  * cavern: major speedup (up to 60%) when reading in survey data containing
    a lot of stations in the same survey hierarchy level (which is how Compass
    files are handled).
  * cavern: don't warn about a compass reading on a plumbed leg if the
    plumb was inferred and the compass reading is zero.
  * cavern: reduced memory usage in code which reads a survey station name.
  * cavern: reported CPU time would go negative if cavern ran for more than
    about 36 minutes (highly unlikely but not impossible on a slow machine
    with a large, highly interconnect survey) - fixed.
  * cavern: avoid unnecessary work when --percentage isn't specified.
  * cavern: Writing "*:" at the start of a .svx file would crash cavern - fixed
    and added test case.  This is an error anyway, but it shouldn't cause a
    crash.
  * Don't distribute unused toolbar icons.
  * Documentation: minor updates.

 -- Wookey <wookey@survex.com>  Fri, 25 Oct 2002 03:16:34 +0100

survex (1.0.18) unstable; urgency=low

  * Fixed "Process" action on .svx files.
  * File associations: if survex-svxedit isn't installed, run gnome-edit
    instead.
  * Include file associations and file icons in the main package rather than
    survex-aven.
  * Documentation: added details of the 3d file format (version 3).
  * Updated TODO list.
  * Tweaked source to hopefully build on HPPA again (closes: bug#162912).
  * Proper description for survex-svxedit (closes: bug#162954, bug#162970).

 -- Wookey <wookey@survex.com>  Mon, 07 Oct 2002 00:29:05 +0100

survex (1.0.17) unstable; urgency=low

  * Note: 1.0.15 and 1.0.16 addressed MS Windows specific problems.
  * survex-aven package now installs mime types, icons, and file associations
    for Gnome.  Note: at present GMC doesn't seem to notice new files being
    created (e.g.  Process on a .svx file creates .3d and .err files) - you
    have to manually refresh the view.
  * survex-svxedit is now architecture independent.  Fixed up a few lintian
    warnings relating to it too.
  * Minor update to manual.

 -- Wookey <wookey@survex.com>  Tue, 24 Sep 2002 20:20:20 +0100

survex (1.0.14) unstable; urgency=low

  * svxedit: This is a Survex data entry editor from the therion team.  It
    currently experimental needs tcl and wish installed, so is it its own
    package: survex-svxedit.
  * Improved handling of Compass PLT files and CMAP xyz files.
  * aven: when picking non-overlapping labels, show a slight preference to
    shorter labels with the aim of displaying more labels.
  * aven: fixed hard to notice problem which could cause the cave to appear
    tilted sideways after a lot of manipulation.
  * cavern: Modest speed improvement (0.5% for sample dataset).
  * cavern: fixed a rarely sighted bug which caused erroneous error about some
    stations not being attached to a fixed point.
  * cavern: fixed clino readings and DIRECTION to work in interleaved data.
  * cavern: improved error reporting when an invalid value is given for a
    DIRECTION reading.
  * cavern: fixed "singular matrix" error when very low SDs were specified.
  * print*: if the --raw is used, the survey can now use the space this would
    have taken up.
  * Reading of ASCII 3d files now copes with MSDOS/MS Windows line endings
    once again.  Added regression test for this.
  * Updated documentation.

 -- Wookey <wookey@survex.com>  Sun, 15 Sep 2002 00:11:05 +0100

survex (1.0.13) unstable; urgency=low

  * aven: Fixed bug which caused the occasional spurious leg to be shown
    connecting arbitrary stations.
  * extend: try to extend along a survey, and make breaks where other surveys
    join.
  * cavern: Number reading code reworked to allow repeat readings to be
    supported, but the actual repeat reading code is currently disabled,
    and everything should work exactly as before.
  * Experimental support for Chinese (LANG=zh) - only a few messages are
    currently translated.

 -- Wookey <wookey@survex.com>  Fri, 28 Jun 2002 15:34:26 +0100

survex (1.0.12) unstable; urgency=low

  * diffpos: fixed to work on 64bit architectures.
  * sorterr: fixed to work with more than 1024 traverses.
  * Fixed handling of iso-8859-2 character set.
  * Fixed Aven to work from Debian Apps menu (running an installed program
    with an explicit path works again).
  * xcaverot: automatically switch on PDA mode if the screen is narrower than
    640 pixels.
  * Updates to Portuguese translation - all translations are now up-to-date.

 -- Wookey <wookey@survex.com>  Fri, 07 Jun 2002 18:16:30 +0100

survex (1.0.11) unstable; urgency=low

  * aven: improvements in 1.0.10 to the file type selector only work with
    wxGtk >= 2.3 (the debian package is the latest stable release: 2.2.9
    where this doesn't work).  Fixed to work as well as possible on 2.2.9,
    and as intended if rebuilt against 2.3.
  * aven: fixed so that loading PLT files works regardless of the current locale
    (previously it would fail for locales where the decimal character wasn't
    '.').
  * aven: key actions during autorotation no longer temporarily pause
    autorotation.
  * aven: switching to plan or elevation while rotating is now smooth.
  * aven: removed undocumented and confusing "free rotation mode".
  * cad3d: write dummy passage dimensions to .plt files to avoid Compass bug.
  * printps: now supports coloured printouts.
  * print*: fixed to work correctly with PLT files.
  * extend: fixed to work correctly with PLT files.
  * Updates to Italian translation.
  * Minor documentation updates.

 -- Wookey <wookey@survex.com>  Wed, 29 May 2002 13:44:31 +0100

survex (1.0.10) unstable; urgency=low

  * aven: Fully disabled some debug code (closes: bug#147309).
  * aven: only add a file to the list of recently used files if it was opened
    successfully.
  * aven: recognise ".plf" as a Compass PLT file too; recognise uppercase
    variants of file extensions in File->Open filters to help people who
    transfer files from MSDOS/MS Windows.
  * cavern: fixed bogus warning triggered by "*begin abc.def" (I'm not sure
    that this should be valid, but the warning given wasn't appropriate).
  * Fixed scaling problem when reading PLT file (feet->metres conversion
    factor was being applied backwards!)
  * Fixed potential problem when reading or writing a 3d file which couldn't
    be opened.
  * Translate dots to spaces in survey names in Compass PLT files.
  * Better handling of PLT files which have a D command before any M command.
  * Updates to German and Italian internationalisations.

 -- Wookey <wookey@survex.com>  Fri, 24 May 2002 12:48:54 +0100

survex (1.0.9) unstable; urgency=low

  * aven: Fixed jerky start when auto-rotation begins.
  * cavern: Fixed Direction reading - bug previously made it unusable.
  * Updates to French, Spanish, Catalan, and Slovak internationalisations.

 -- Wookey <wookey@survex.com>  Fri, 17 May 2002 12:06:48 +0100

survex (1.0.8) unstable; urgency=low

  * aven: lots of improvements and fixes - now uses 25% less memory.
  * cavern: support for backsights, percentage gradients, inferred exports,
    and a few minor bug fixes.
  * print*: a few improvements.
  * New Slovak (sk) internationalisation.

 -- Wookey <wookey@survex.com>  Mon, 13 May 2002 12:13:27 +0100

survex (1.0.7) unstable; urgency=low

  * print*: halted with a failed assertion in 1.0.4-1.0.6.

 -- Wookey <wookey@survex.com>  Mon, 08 Apr 2002 09:48:43 +0100

survex (1.0.6) unstable; urgency=low

  * Assorted aven fixes and enhancements.
  * Spell-checked documentation.

 -- Wookey <wookey@survex.com>  Sun, 07 Apr 2002 15:36:11 +0100

survex (1.0.5) unstable; urgency=low

  * img_open_survey() could crash if you tried to open an unrecognised file
    (i.e. not .3d, .pos, .plt, or .xyz format).
  * North and East were the wrong way round when reading in .plt files.
  * cad3d: Improved .plt file output - Compass should read it now.
  * Documentation updates.

 -- Wookey <wookey@survex.com>  Fri, 05 Apr 2002 01:52:54 +0100

survex (1.0.4) unstable; urgency=low

  * extend: now keep all names for an equated group of stations.
  * cad3d: if an output filename is given, use its extension to pick the
    default output format.
  * aven: movement with keyboard is now accelerated by Shift as in caverot.
  * print*: --no-borders fixed to work as documented; --no-cutlines added to
    turn off the dashed lines where pages join on multi-page printouts.
  * Improvements to .plt file reading.
  * Added support for reading CMAP XYZ files.
  * Documentation updates.

 -- Wookey <wookey@survex.com>  Mon, 01 Apr 2002 23:23:07 +0100

survex (1.0.3) unstable; urgency=low

  * aven: support for feet and grads.
  * aven: show altitude of mouse pointer when in elevation view.
  * print*: say where output is being sent.
  * Updated fr internationalisation; minor updates to other languages.

 -- Wookey <wookey@survex.com>  Thu, 21 Mar 2002 01:51:27 +0000

survex (1.0.2) unstable; urgency=low

  * printdm and printpcl now obey font_size_labels setting in print.ini etc.
  * Enhancements and bug-fix to handling of Topofil.
  * *FIX with 3 standard deviations but no covariances now works.
  * cad3d: new --plt option produces crude approximation to Compass .plt
    files - should be good enough for reading into Carto.
  * img library now reads Compass .plt files as if they were .3d files.
  * Updated ca and es internationalisations.

 -- Wookey <wookey@survex.com>  Sun, 17 Mar 2002 12:42:44 +0000

survex (1.0.1) unstable; urgency=low

  * Updated pt-br and it internationalisations.

 -- Wookey <wookey@survex.com>  Thu, 31 Jan 2002 06:15:26 +0000

survex (1.0.0) unstable; urgency=low

  * Compiling gfxcore.cc often causes an ICE in GCC 2.95, so if the compile
    fails on this source we now retry with -O instead of -O2.  Hopefully
    this'll get us a build on all architectures...

 -- Wookey <wookey@survex.com>  Sun, 23 Dec 2001 01:58:55 +0000

survex (0.99.10) unstable; urgency=low

  * Aven updates
  * Bug fix in .3d file reading code

 -- Wookey <wookey@survex.com>  Wed, 19 Dec 2001 14:28:10 +0000

survex (0.99.9) unstable; urgency=low

  * Aven updates

 -- Wookey <wookey@survex.com>  Sat, 15 Dec 2001 14:27:00 +0000

survex (0.99.8) unstable; urgency=low

  * New release - now compiles under GCC3.0 so should build on hppa

 -- Wookey <wookey@survex.com>  Tue, 04 Dec 2001 19:30:07 +0000

survex (0.99.7) unstable; urgency=low

  * New release

 -- Wookey <wookey@survex.com>  Thu, 15 Nov 2001 18:49:05 +0000

survex (0.99.6) unstable; urgency=low

  * New release (closes: bug#118280)

 -- Wookey <wookey@survex.com>  Fri, 09 Nov 2001 15:02:37 +0000

survex (0.99.5) unstable; urgency=low

  * New release (closes: bug#116511)
  * Aven updates

 -- Wookey <wookey@survex.com>  Mon, 22 Oct 2001 12:16:02 +0100

survex (0.99.4) unstable; urgency=low

  * New release

 -- Wookey <wookey@survex.com>  Fri, 12 Oct 2001 01:56:58 +0100

survex (0.99.3) unstable; urgency=low
 
  * New release
     
 -- Wookey <wookey@survex.com>  Fri, 05 Oct 2001 01:04:36 +0100