[11c814b] | 1 | up to: a7dfc9e6886db6888341f7e51763c8e180316848 |
---|
| 2 | |
---|
| 3 | * aven: |
---|
| 4 | |
---|
| 5 | + Use superscript 'g' symbol instead of word 'grads' in status bar. This |
---|
| 6 | conserves the limited space available, and we already do this in the |
---|
| 7 | compass and clino indicators so it's more consistent too. |
---|
| 8 | |
---|
| 9 | + Show one decimal place on measure line bearing. Pointed out by Benedikt |
---|
| 10 | Hallinger on the therion list, though I'm sure this has been asked for |
---|
| 11 | before by others. |
---|
| 12 | |
---|
| 13 | + Show gradient of the measuring line when both ends are stations. |
---|
| 14 | |
---|
| 15 | + Allow selection of text in cavern log window. Selection was disabled in |
---|
| 16 | 1.2.28 because it seemed you couldn't actually copy selected text to the |
---|
| 17 | clipboard, but retesting this now actually works fine for me, both with |
---|
| 18 | current git master with the change reverted, and with code just before the |
---|
| 19 | original change. |
---|
| 20 | |
---|
| 21 | + More robust parsing of cavern output - cleanly context highlighting which |
---|
| 22 | extends beyond the end of the line. |
---|
| 23 | |
---|
| 24 | + Allow showing duplicate legs as dashed lines or hiding them entirely, |
---|
| 25 | with dashed now being the default. Implemented by Patrick Warren. |
---|
| 26 | |
---|
| 27 | + Also allow "Dashed" for splays and "Faded" for duplicate legs. |
---|
| 28 | |
---|
| 29 | + Check environment variables VISUAL and EDITOR when looking for editor to |
---|
| 30 | use when a warning or error is clicked on in the cavern log window. |
---|
| 31 | Suggested by Wookey. |
---|
| 32 | |
---|
| 33 | The specified editor may have a GUI or need to run in a terminal, so it |
---|
| 34 | seems we have to special case each editor supported. This also means we |
---|
| 35 | can pass extra options needed to position the cursor on the |
---|
| 36 | appropriate line/column. |
---|
| 37 | Currently these editors are supported: |
---|
| 38 | gvim, vim, gedit, pluma, emacs, nano, jed, kate |
---|
| 39 | |
---|
| 40 | + Fix handling of non-square terrain data files - the X and Y dimensions were |
---|
| 41 | swapped. Reported by detrito. |
---|
| 42 | |
---|
| 43 | + Improve .hdr file parsing: |
---|
| 44 | Use documented defaults for more values. And where we only support |
---|
| 45 | a subset of values (or a particular value) check for files which |
---|
| 46 | don't fall in the support subset in more cases. |
---|
| 47 | Report error if NBITS not specified in .hdr |
---|
| 48 | |
---|
| 49 | * cavern: |
---|
| 50 | |
---|
| 51 | + (Mac OS X and Microsoft Windows versions): Build with newer version of |
---|
| 52 | PROJ library which fixes buggy handling of *fix with lat-long coordinates. |
---|
| 53 | Reported by Ross Davidson. |
---|
| 54 | |
---|
| 55 | + Fix cavern to handle Compass .DAT with no survey team. Previously this |
---|
| 56 | resulted in the bogus error: Expecting numeric field, found "FROM" |
---|
| 57 | Reported by Erin Lynch. |
---|
| 58 | |
---|
| 59 | + Handle UTF-8 "BOM" at start of .svx files. Unicode doesn't recommend its |
---|
| 60 | use, but Microsoft stuff seems to like to create files with it in, and the |
---|
| 61 | error cavern currently reports for such files is very confusing, so it |
---|
| 62 | seems best to just handle it. Reported by Rob Eavis. |
---|
| 63 | |
---|
| 64 | + Change a couple of messages to use double quotes for consistency with all |
---|
| 65 | other messages. |
---|
| 66 | |
---|
| 67 | * Fix errors in documentation of *units: "DEG" should be "DEGS", and |
---|
| 68 | "MINUTES" has been supported for ages but wasn't documented. Reported by |
---|
| 69 | Footleg. |
---|
| 70 | |
---|
| 71 | * Fix typo in dump3d documentation. |
---|
| 72 | |
---|
[56b37f3] | 73 | Changes in 1.2.30 (2016-10-03): |
---|
| 74 | |
---|
| 75 | * aven: |
---|
| 76 | |
---|
| 77 | + (Microsoft Windows version): Fix crash when trying to print or export |
---|
| 78 | (probably introduced in 1.2.28). Reported by Brian Clipstone. |
---|
| 79 | |
---|
| 80 | + Report error if terrain file contains no terrain data in area of survey. |
---|
| 81 | Suggested by detrito. |
---|
| 82 | |
---|
| 83 | + Errors when writing an export file were reported with the wrong filename |
---|
| 84 | - the .3d file, not the filename we were trying to write to. |
---|
| 85 | |
---|
| 86 | + Export to KML now supports exporting passages, walls and cross-sections. |
---|
| 87 | Addresses the remainder of ticket #4. |
---|
| 88 | |
---|
| 89 | * Add man page for dump3d. |
---|
| 90 | |
---|
[d0418ac] | 91 | Changes in 1.2.29 (2016-09-27): |
---|
| 92 | |
---|
| 93 | * aven: |
---|
| 94 | |
---|
| 95 | + Fix SVG output with non-ASCII characters (the charset in the SVG file |
---|
| 96 | is now set to UTF-8 not ISO-8859-1). |
---|
| 97 | |
---|
| 98 | + (Microsoft Windows version): Fix error dialog on startup in pre-built |
---|
[53c1e5d] | 99 | version. Reported by Brian Clipstone. |
---|
[d0418ac] | 100 | |
---|
| 101 | * Manual: Add link to TerrainData wiki page. Omission highlighted by Erin |
---|
| 102 | Lynch and "detrito". |
---|
| 103 | |
---|
| 104 | * Fix to build without FFmpeg/libav and with older versions, broken by changes |
---|
| 105 | in 1.2.28. Reported by James Begley. |
---|
| 106 | |
---|
[6897356] | 107 | Changes in 1.2.28 (2016-09-24): |
---|
[0d8f67a] | 108 | |
---|
| 109 | * cavern: |
---|
| 110 | |
---|
| 111 | + Show the contents of the line after error and warning messages while |
---|
| 112 | processing survey data, and indicate the region of the line in many cases |
---|
| 113 | in the same style that compilers such as GCC and clang use (using the |
---|
| 114 | column number we already have, plus new width information). Based on a |
---|
| 115 | patch from Mateusz Golicz. |
---|
| 116 | |
---|
| 117 | + Add column and width information for many more error and warning messages. |
---|
| 118 | |
---|
| 119 | + Fix column for "Separator in survey name" warning. |
---|
| 120 | |
---|
| 121 | + Improve warnings when using a backclino with range 0-180 degrees (reusing |
---|
| 122 | the same machinery we already have for a forward clino with range 0-180 |
---|
| 123 | degrees). |
---|
[99b3298] | 124 | |
---|
| 125 | * aven: |
---|
| 126 | |
---|
| 127 | + Include LRUD in printout/export of extended elevations, broken by |
---|
| 128 | improvements to export of tilted elevations in 1.2.27. Reported by Anthony |
---|
| 129 | Day. |
---|
| 130 | |
---|
| 131 | + Name <trk> tags in GPX output, so Garmin GPS units name the imported track |
---|
| 132 | usefully. Reported by Anthony Day. |
---|
| 133 | |
---|
| 134 | + Remember scale from previous print or export operation in the same run of |
---|
| 135 | aven. Suggested by Stuart Bennett. |
---|
| 136 | |
---|
[0d8f67a] | 137 | + Convert range indication below shown line to a highlight on that region |
---|
| 138 | of the line in cavern log window. |
---|
| 139 | |
---|
[99b3298] | 140 | + Fix colouring of error/warning without column in cavern log window. |
---|
| 141 | |
---|
| 142 | + Fix click on error/warning without column in cavern log window. |
---|
| 143 | |
---|
[6897356] | 144 | + Fix highlight of translations of "error" or "warning" containing non-ASCII |
---|
| 145 | characters. This fix for this only works with a Unicode build of |
---|
| 146 | wxWidgets, but as of wxWidgets 3.0, all builds are Unicode, so this |
---|
| 147 | shouldn't be much of a problem as wxWidgets 2.x is close to obsolete now. |
---|
| 148 | Reported by Mateusz Golicz. |
---|
| 149 | |
---|
[0d8f67a] | 150 | + Disable selection of text in cavern log window - you can't currently copy |
---|
| 151 | it to the clipboard, so until that's implemented it seems better to disable |
---|
| 152 | the ability to select it. Reported by Wookey. |
---|
| 153 | |
---|
[99b3298] | 154 | + Avoid special "1000" scale entry when exporting. |
---|
| 155 | |
---|
| 156 | + Show 1 page when "One Page" selected. |
---|
| 157 | |
---|
| 158 | + Reload processed data when restricting view. Fixes failure when |
---|
| 159 | restricting view on data just processed via aven. Spotted by Andrew |
---|
| 160 | Atkinson and myself. |
---|
| 161 | |
---|
| 162 | + Don't hide blobs and crosses behind terrain. Reported by Jenny Black. |
---|
| 163 | |
---|
| 164 | + Fix rendering of crosses using point sprites. The texture being used was |
---|
| 165 | misaligned relative to the image used for the visual fidelity check, so the |
---|
| 166 | check always failed and point sprites would never be used. Where point |
---|
| 167 | sprites are supported, they're probably the fastest option - on my netbook |
---|
| 168 | this change improves FPS by ~6 fold when displaying crosses for a large |
---|
| 169 | survey. |
---|
| 170 | |
---|
| 171 | + Support drawing blobs using point sprites. About 5 times faster than using |
---|
| 172 | lines on my netbook. |
---|
| 173 | |
---|
| 174 | + Recheck how best to draw crosses and blobs on the first run after Survex |
---|
| 175 | is upgraded (or downgraded) as the rendering code may have changed (we |
---|
| 176 | already recheck when the OpenGL hardware or driver changes). |
---|
| 177 | |
---|
[6897356] | 178 | + Change "MPEG" export to be MPEG4 (.mp4) rather than MPEG1 (.mpg). |
---|
| 179 | MPEG4 produces smaller output of higher quality, and should be widely |
---|
| 180 | supported these days. And I can't get the MPEG1 output to work without |
---|
| 181 | buffer underflows, resulting in a file which doesn't play without |
---|
| 182 | glitches. |
---|
| 183 | |
---|
| 184 | + Add OGG video to the list of formats - it's more compact than the others |
---|
| 185 | we currently list, though slower to write. |
---|
| 186 | |
---|
| 187 | + Fix export to movie formats for which libav/FFmpeg needs to seek the file |
---|
| 188 | being written. This was broken by changes in 1.2.27. |
---|
| 189 | |
---|
| 190 | + Overhaul movie export for the current FFmpeg API, fixing deprecation |
---|
| 191 | warnings when building against a recent version. |
---|
| 192 | |
---|
[99b3298] | 193 | + (Microsoft Windows version): Fix corrupted exported movie files. 1.2.27 |
---|
| 194 | changed the movie export code to allow writing to files with non-ASCII |
---|
| 195 | characters in the names, but the new code failed to open the file in binary |
---|
| 196 | mode, leading to corrupt output. Fixes #81, reported by Erin Lynch. |
---|
| 197 | |
---|
[f55cbeb] | 198 | * (Microsoft Windows version): Pre-built version now uses FFmpeg 3.1.3 for |
---|
| 199 | movie export. |
---|
| 200 | |
---|
| 201 | * (Mac OS X version): Pre-built version now uses FFmpeg 3.1.3 for movie |
---|
| 202 | export. |
---|
| 203 | |
---|
[99b3298] | 204 | * Fix to build without FFmpeg/libav, broken by changes in 1.2.27. Reported by |
---|
| 205 | James Begley. |
---|
| 206 | |
---|
[0d8f67a] | 207 | * The Polish translation is now very close to being complete, thanks to a |
---|
| 208 | substantial update from Mateusz Golicz. |
---|
| 209 | |
---|
[99b3298] | 210 | * Merge catalan translation updates from Adolfo Jayme. |
---|
| 211 | |
---|
[7333c2c] | 212 | * (Microsoft Windows version): Map LANG_CHINESE to zh_CN not zh so Chinese |
---|
| 213 | messages get used automatically. |
---|
| 214 | |
---|
| 215 | * cavern.tst: Remove random : from after ] - dash ignores the extra character, |
---|
| 216 | but it causes this test to fail if /bin/sh is a different shell (e.g. bash). |
---|
| 217 | |
---|
[0d8f67a] | 218 | * cavern.tst: Add expected output for more testcases. |
---|
| 219 | |
---|
| 220 | * Remove unwanted execute bit from some testcase data. |
---|
| 221 | |
---|
| 222 | * Use https for more URLs which support it. |
---|
| 223 | |
---|
[690fdab] | 224 | Changes in 1.2.27 (2016-06-06): |
---|
[dfe8d05] | 225 | |
---|
| 226 | * aven: |
---|
| 227 | |
---|
| 228 | + Right click on a survey in the survey tree now gives a pop-up menu |
---|
| 229 | with "Hide others", which restricts the view to just that survey |
---|
| 230 | and any subsurveys. Right click on the root of the survey tree |
---|
| 231 | gives a menu with "Show all" to undo any restriction in effect. |
---|
| 232 | (Currently these are implemented by reloading the file and using |
---|
| 233 | the same machinery as the --survey= command line option, but that will |
---|
| 234 | probably change in the future). |
---|
| 235 | |
---|
[690fdab] | 236 | + If there's a sub-survey restriction (from the --survey= command line |
---|
| 237 | option or the new UI described above) it is now shown in brackets after |
---|
| 238 | the survey tree root. |
---|
[dfe8d05] | 239 | |
---|
[690fdab] | 240 | + When reloading a survey, preserve the current view position (previously |
---|
| 241 | the view was recentred). |
---|
[dfe8d05] | 242 | |
---|
| 243 | + When reloading a survey, actually preserve the current scale factor |
---|
| 244 | (this was meant to happen, but the adjustment was applied in the |
---|
| 245 | wrong direction). |
---|
| 246 | |
---|
| 247 | + New "File->Extended Elevation..." menu item provides a way to generate |
---|
| 248 | extended elevations for simple cases without having to use the command |
---|
| 249 | line. Suggested by Fleur Loveridge. |
---|
| 250 | |
---|
[690fdab] | 251 | + Don't process key presses if accompanied by an unexpected modifier key. |
---|
| 252 | In particular, this means that aven no longer interferes with Alt+<function |
---|
| 253 | key> (which is typically handled by the desktop) and Alt+<letter> (which is |
---|
| 254 | typically a menu short cut). Reported by Владимир Георгиев. |
---|
[dfe8d05] | 255 | |
---|
| 256 | + Reduce file loading time by ~5%. The station name compare function was |
---|
| 257 | something of a hot spot, and optimising it yielded a nice improvement. |
---|
| 258 | |
---|
[690fdab] | 259 | + Allow splay legs to be disabled in when printing and exporting. Mostly |
---|
| 260 | addresses #60. |
---|
| 261 | |
---|
| 262 | + SVG export now shows splay legs thinner and in grey. See #60. |
---|
| 263 | |
---|
| 264 | + Fix export of rotated plans and tilted elevations - previously plans were |
---|
| 265 | always aligned with North up, and elevations which weren't exactly side on |
---|
| 266 | were exported as plans. Reported by Stuart Bennett. |
---|
| 267 | |
---|
| 268 | + Fix offset bounding box for exported elevations. |
---|
| 269 | |
---|
| 270 | + In print/export dialog the bearing value now wraps if you scroll up past |
---|
| 271 | 360 or down past 0. |
---|
| 272 | |
---|
| 273 | + Fix greying out of LRUD-based controls in the print/export dialog when the |
---|
| 274 | view is tilted (i.e. not plan or elevation). This stopped working in |
---|
| 275 | 1.2.18 when the pan and tilt spin controls were changed from integer- to |
---|
| 276 | real-valued ones. |
---|
[dfe8d05] | 277 | |
---|
| 278 | + Printouts now show LRUD as pale grey arrows from the station they are |
---|
| 279 | measured from. Based on patch from Michael Sargent. Closes #65. |
---|
| 280 | |
---|
[690fdab] | 281 | + Take LRUD into account for printout size. Fixes #72, reported by Erin |
---|
| 282 | Lynch. |
---|
[dfe8d05] | 283 | |
---|
[690fdab] | 284 | + Update movie export code to work with latest version of FFmpeg. |
---|
| 285 | |
---|
| 286 | + Make "Show Log" a toggle, so you can click on the button to take a look at |
---|
| 287 | the log, and a second click returns you to the survey view. |
---|
| 288 | |
---|
| 289 | + (Microsoft Windows version): Open the font file in binary mode - it looks |
---|
| 290 | like we were lucky and the font file (or at least its current version) |
---|
| 291 | would have loaded OK in text mode despite being binary data. |
---|
| 292 | |
---|
| 293 | + (Microsoft Windows version): Exporting to files with non-ASCII filenames |
---|
| 294 | should now work. |
---|
[dfe8d05] | 295 | |
---|
| 296 | * cavern: |
---|
| 297 | |
---|
| 298 | + Allow tape or backtape to be omitted. Reported by Erin Lynch. |
---|
| 299 | |
---|
| 300 | + Grid convergence is now corrected for when using automatically |
---|
| 301 | calculated declinations (*declination auto <X> <Y> <Z>). Requested |
---|
| 302 | by Mateusz Golicz on the mailing list. |
---|
| 303 | |
---|
| 304 | + Clear any cached calculated declination upon another *declination auto |
---|
| 305 | with different coordinates. Previously if the date stayed the same, |
---|
| 306 | a previously cached declination for the old coordinates was used. |
---|
| 307 | |
---|
| 308 | + Fix check for end of version number array in *required. We would check up |
---|
| 309 | to 12 version components, the last 9 being bogus. In practice, *require is |
---|
| 310 | only likely to be used with up to three components, so this wouldn't be an |
---|
| 311 | issue. |
---|
| 312 | |
---|
| 313 | + *begin with an invalid prefix could cause a crash in some cases. Fixed |
---|
| 314 | by patch from Colin Watson. |
---|
| 315 | |
---|
[690fdab] | 316 | + Report column locations for errors to do with readings. |
---|
| 317 | |
---|
[dfe8d05] | 318 | * Merge translation updates from Jean-Marc. |
---|
| 319 | |
---|
| 320 | * img library: Better document which members can be set when writing. |
---|
| 321 | Highlighted by email query about use of img API from Владимир Георгиев. |
---|
| 322 | |
---|
[690fdab] | 323 | * Document how *declination interacts with *calibrate declination if both are |
---|
| 324 | used in the same dataset. |
---|
| 325 | |
---|
[dfe8d05] | 326 | * doc/3dformat.htm: Update details of how changes to the current label buffer |
---|
| 327 | are encoded to reflect changes in v8. Reported by Angus Sawyer. |
---|
| 328 | |
---|
| 329 | * Use docbook2man instead of docbook-to-man to generated Unix man pages |
---|
| 330 | from SGML source. The latter seems to be no longer actively maintained, and |
---|
| 331 | docbook2man now does a similarly good job. |
---|
| 332 | |
---|
| 333 | * Use https for survex.com links, and for other sites which support it. |
---|
| 334 | |
---|
[cd746b9] | 335 | Changes in 1.2.26 (2016-01-07): |
---|
| 336 | |
---|
| 337 | * aven: |
---|
| 338 | |
---|
| 339 | + (Microsoft Windows version): Fix to be able to process .svx files with |
---|
| 340 | cavern again. |
---|
| 341 | |
---|
[8ee50db] | 342 | * (Microsoft Windows version): Simplify upgrading process with innosetup |
---|
| 343 | installer - if Survex is already installed, we now just install to the same |
---|
| 344 | location and use the same start menu folder. |
---|
| 345 | |
---|
| 346 | * (Linux version): survex.spec: Update for filetype metadata change in 1.2.25. |
---|
| 347 | Fixes #79, reported by James Begley. |
---|
| 348 | |
---|
| 349 | * (Linux version): survex.spec: Fix to work with RPM 4.13. Fixes #79, reported |
---|
| 350 | by James Begley. |
---|
| 351 | |
---|
[cd5cd8f] | 352 | Changes in 1.2.25 (2016-01-05): |
---|
[4e92bec] | 353 | |
---|
[cd5cd8f] | 354 | * aven: |
---|
[4e92bec] | 355 | |
---|
[cd5cd8f] | 356 | + Drop broken code which attempts to fix 2D pitches. Fixes #73, reported by |
---|
| 357 | Erin Lynch. #76 tracks the issue the removed code was trying (but failing) |
---|
| 358 | to address. |
---|
[4e92bec] | 359 | |
---|
[cd5cd8f] | 360 | + When animating, don't try to update station info based on mouse movement |
---|
| 361 | over the survey tree. |
---|
[4e92bec] | 362 | |
---|
[cd5cd8f] | 363 | + Further improve code to handle cavern subprocess in aven. |
---|
[4e92bec] | 364 | |
---|
[cd5cd8f] | 365 | + Fix jump to error for filenames containing colons when the error location |
---|
| 366 | doesn't have a column number. Bug noted by Jenny Black. |
---|
[4e92bec] | 367 | |
---|
[cd5cd8f] | 368 | + If we encounter bad UTF-8 in cavern output, replace it with a red and white |
---|
| 369 | ? in a diamond (previously we gave up showing output at the first bad |
---|
| 370 | sequence). This can happen if you process a .svx file which isn't UTF-8 |
---|
| 371 | encoded. |
---|
[4e92bec] | 372 | |
---|
[cd5cd8f] | 373 | + (Unix version): Don't try to set the terminal window title when opening an |
---|
| 374 | editor from the cavern log window - gnome-terminal no longer supports this, |
---|
| 375 | and there doesn't seem to be a portable option for specifying the title for |
---|
| 376 | terminals which do still support this. |
---|
[4e92bec] | 377 | |
---|
[cd5cd8f] | 378 | + (Microsoft Windows version): Also quote for cmd.exe so that paths with |
---|
| 379 | spaces in work reliably. Reported by Marco Cotto. |
---|
[4e92bec] | 380 | |
---|
[cd5cd8f] | 381 | * cavern: |
---|
[4e92bec] | 382 | |
---|
[cd5cd8f] | 383 | + Improve error for mismatched fore/back-sight plumbs, reported by Andy |
---|
| 384 | Edwards (see #78). |
---|
[4e92bec] | 385 | |
---|
[cd5cd8f] | 386 | + Fix to use correct sd for backcompass. We were using zero instead, the |
---|
| 387 | most obvious effect of which was that the threshold for warning about |
---|
| 388 | differing COMPASS and BACKCOMPASS was about 71% of what it should have |
---|
| 389 | been, so we were warning in more cases than we should have been. |
---|
[4e92bec] | 390 | |
---|
[cd5cd8f] | 391 | + Implement support for specifying a length on backsights - if you're using |
---|
| 392 | something like a disto-x, you'll get a distance reading for the backsight |
---|
| 393 | too. Fixes #71, reported by Erin Lynch. |
---|
[4e92bec] | 394 | |
---|
[cd5cd8f] | 395 | + Make line counting more robust to mixed line ends. Noticed in example file |
---|
| 396 | from Pete Smart (see #69). |
---|
[4e92bec] | 397 | |
---|
[cd5cd8f] | 398 | * extend: New --show-breaks option which adds a leg flagged as surface survey |
---|
| 399 | between each points at which a loop has been broken. Suggested by Jenny |
---|
| 400 | Black. |
---|
[4e92bec] | 401 | |
---|
[cd5cd8f] | 402 | * (Unix version): Update filetype metadata to work with modern desktops. |
---|
[4e92bec] | 403 | |
---|
[cd5cd8f] | 404 | * Fix incorrect reporting of errors reading and writing processed survey data. |
---|
| 405 | Since 1.2.8, the error strings corresponding to IMG_CANTOPENOUT, |
---|
| 406 | IMG_BADFORMAT and IMG_DIRECTORY have been mixed up (this doesn't affect |
---|
| 407 | external programs using the img library, only Survex). Reported by Jenny |
---|
| 408 | Black. |
---|
[4e92bec] | 409 | |
---|
[cd5cd8f] | 410 | * Add missing options to extend man page and --help output. Noted by Jenny |
---|
| 411 | Black. |
---|
[4e92bec] | 412 | |
---|
[cd5cd8f] | 413 | * Document Document Ctrl+cursor keys for rotating and tilting in aven man page. |
---|
[4e92bec] | 414 | |
---|
[cd5cd8f] | 415 | * Fix broken SGML markup in manual. |
---|
[4e92bec] | 416 | |
---|
[cd5cd8f] | 417 | * Fix typo in manual reported by Jenny Black. |
---|
[4e92bec] | 418 | |
---|
[cd5cd8f] | 419 | * Update vim syntax file for newer commands, etc. |
---|
[4e92bec] | 420 | |
---|
[cd5cd8f] | 421 | * Minor translation updates. Thanks to Piotr Strębski and Jean-Marc. |
---|
[4e92bec] | 422 | |
---|
[cd5cd8f] | 423 | * Fix to compile with FFmpeg 2.9. Reported by Andreas Cadhalpun in |
---|
| 424 | https://bugs.debian.org/803863 |
---|
[4e92bec] | 425 | |
---|
[cd5cd8f] | 426 | * Stop maintaining ChangeLog files. They make merging patches harder, and stop |
---|
| 427 | 'git cherry-pick' from working as it should. The git repo history should be |
---|
| 428 | sufficient for complying with GPLv2 2(a). |
---|
[4e92bec] | 429 | |
---|
[cd5cd8f] | 430 | * (Microsoft Windows version): The installer requires admin privileges on Vista |
---|
| 431 | and later and OS versions older than Vista are past end of life, so drop code |
---|
| 432 | which tries to set up the registry differently depending if we have admin |
---|
| 433 | privileges or not. |
---|
[4e92bec] | 434 | |
---|
[52dad0e] | 435 | Changes in 1.2.24 (2015-09-23): |
---|
| 436 | |
---|
| 437 | * aven: |
---|
| 438 | |
---|
| 439 | + (Microsoft Windows version): Fix the cavern log window. Reported by Brian |
---|
| 440 | Clipstone. |
---|
| 441 | |
---|
| 442 | + (Microsoft Windows version): Add workaround to avoid breakage in Therion. |
---|
| 443 | Reported by Jenny Black. |
---|
| 444 | |
---|
| 445 | + If wx was built with thread support, aven now runs cavern from a separate |
---|
| 446 | thread, which works much better under wxMSW (where we can't use select), |
---|
| 447 | and also seems a bit smoother on Linux. |
---|
| 448 | |
---|
| 449 | + Fix handling of encoding of filenames when the operating system has no |
---|
| 450 | locale installed corresponding to the language selected for Survex's |
---|
| 451 | messages. |
---|
| 452 | |
---|
| 453 | + Undo accidentally committed debugging code which was sending message to |
---|
| 454 | the terminal in 1.2.23. |
---|
| 455 | |
---|
| 456 | * (Linux version): configure now looks first for wx-config-3.0, which Fedora's |
---|
| 457 | wx3 packages have. Reported by James Begley. |
---|
| 458 | |
---|
| 459 | * Indonesian translation fully up to date again. |
---|
| 460 | |
---|
| 461 | * Manual: Document anonymous stations, based on the text from NEWS. Reported |
---|
| 462 | by Wookey. |
---|
| 463 | |
---|
[1ff33eb] | 464 | Changes in 1.2.23 (2015-09-06): |
---|
[1ed104f] | 465 | |
---|
| 466 | * aven: |
---|
| 467 | |
---|
| 468 | + Updating the cavern log window is now much smoother, especially on slower |
---|
| 469 | machines. |
---|
| 470 | |
---|
| 471 | + Show "busy" mouse cursor while processing survey data. |
---|
| 472 | |
---|
| 473 | + Fix an assertion if you try to start processing a survex file while one is |
---|
| 474 | already being processed. |
---|
| 475 | |
---|
| 476 | + Processing a .svx file with an error now still adds it to the file history. |
---|
| 477 | Reported by Martin Green. |
---|
| 478 | |
---|
[d56a2d4] | 479 | + Fix the orientation of the starting end of tubes. |
---|
| 480 | |
---|
| 481 | * cavern: |
---|
| 482 | |
---|
| 483 | + New *ref command to allow specifying an external reference (e.g. where to |
---|
| 484 | find the original survey notes). |
---|
| 485 | |
---|
| 486 | + Drop support for showing percentage progress in cavern. It's confusing in |
---|
| 487 | a multiple-file dataset as it shows progress in the current file so jumps |
---|
| 488 | around. It also slows down processing, and on a slow machine you'd don't |
---|
| 489 | want that, while on a fast machine processing isn't slow enough for the |
---|
| 490 | progress display to be useful. |
---|
[1ed104f] | 491 | |
---|
| 492 | * French translation is now completely up to date, thanks to Michel Bovey. |
---|
| 493 | |
---|
[d56a2d4] | 494 | * Bundle proj's EPSG and ESRI code lists in the installers for MS Windows and |
---|
| 495 | OS X so that things like "*cs EPSG:29903" work. Reported by Graham Mullan. |
---|
| 496 | |
---|
[1ed104f] | 497 | * (Microsoft Windows version): Process survey data with aven rather than |
---|
| 498 | running cavern. |
---|
| 499 | |
---|
[53b6a5a] | 500 | * (Microsoft Windows version): Installer built with InnoSetup 5.5.6 (recent |
---|
| 501 | releases have been built with 5.5.3) to see if that solves Ray Duffy's |
---|
| 502 | reported issue with not having file associations for .svx files created. |
---|
| 503 | |
---|
[7f7dbd5] | 504 | Changes in 1.2.22 (2015-08-17): |
---|
[d225571] | 505 | |
---|
| 506 | * aven: |
---|
| 507 | |
---|
| 508 | + Ensure that the window has a depth buffer. Whether it does by default |
---|
| 509 | seems to vary depending on OS and maybe graphics card. Fixes #55 (terrain |
---|
| 510 | is no longer visible through itself), and also the rendering of passage |
---|
| 511 | tubes. Thanks to Martin Green for pointing me in the right direction for |
---|
| 512 | finding this fix. |
---|
| 513 | |
---|
| 514 | * cavern: |
---|
| 515 | |
---|
| 516 | + Fix *declination with an angle to actually work. |
---|
| 517 | |
---|
| 518 | + Fix assertion if we try to identify a hanging survey by an anonymous |
---|
| 519 | station. |
---|
| 520 | |
---|
[7f7dbd5] | 521 | + Improve errors for invalid survey names in *begin, *end, *equate and |
---|
| 522 | *export. |
---|
| 523 | |
---|
[2d865b7] | 524 | Changes in 1.2.21 (2015-07-28): |
---|
[31e9b72] | 525 | |
---|
[03c259e] | 526 | * aven: |
---|
| 527 | |
---|
[2d865b7] | 528 | + Fix exporting to KML and other text-based formats to always use "." for the |
---|
| 529 | decimal separator - previously "," would be used when the user's locale |
---|
| 530 | specified this for the decimal separator. Reported by Jan Schorn. |
---|
| 531 | |
---|
[22f17f1] | 532 | + Implement exporting of survey legs in KML format. |
---|
| 533 | |
---|
[03c259e] | 534 | + Put "paddle" placemarker icons on stations in exported KML files, using the |
---|
| 535 | same colour coding for entrances, fixed points and exported points as aven |
---|
| 536 | does. |
---|
| 537 | |
---|
[2d865b7] | 538 | + Remove the "Coordinate projection" field from the print dialog, as it isn't |
---|
| 539 | relevant there. Reported by Wookey. |
---|
| 540 | |
---|
| 541 | + Fix the initial scale for small caves (since 1.2.18 the initial scale has |
---|
| 542 | been too small). Reported by Wookey. |
---|
| 543 | |
---|
| 544 | + Don't rescale if the same file is reloaded, but adjust the volume diameter |
---|
| 545 | as appropriate. |
---|
| 546 | |
---|
[03c259e] | 547 | + Use wxGetenv() to read the SURVEXEDITOR variable, so we can accept Unicode |
---|
| 548 | values on Windows. |
---|
| 549 | |
---|
| 550 | * cavern: |
---|
| 551 | |
---|
[22f17f1] | 552 | + Fix coordinate systems using latitude and longitude - PROJ.4 wants these in |
---|
| 553 | radians, but we were passing degrees, which would generally cause the |
---|
| 554 | conversion to the output coordinate system to fail. Reported by Wookey. |
---|
| 555 | |
---|
[2d865b7] | 556 | + Fix *fix with standard deviations when *cs is in use, give an error for use |
---|
| 557 | of *fix with standard deviations before *cs. |
---|
| 558 | |
---|
| 559 | + Add new *declination command with support for setting the declination |
---|
| 560 | automatically from the IGRF model based on the survey date. Thanks to the |
---|
| 561 | Therion developers for the IGRF support code, which we're reusing. |
---|
[1687a13] | 562 | Fixes #54, reported by Wookey. |
---|
| 563 | |
---|
| 564 | + Allow the units for the zero error to be specified, making it easier to |
---|
| 565 | specify calibration with a scale if you measure the zero error externally |
---|
| 566 | (rather than using the instrument itself). Fixes #61, reported by Andrew |
---|
| 567 | Atkinson. |
---|
[2d865b7] | 568 | |
---|
| 569 | + Report the error from PROJ when coordinate conversion fails as part of the |
---|
| 570 | actual error rather than on a separate line. |
---|
[22f17f1] | 571 | |
---|
[03c259e] | 572 | + Fix use after free after *solve. This only occurs if a leg between the two |
---|
| 573 | exact same stations appears right before and right after the *solve, which |
---|
| 574 | is unlikely in real data, but the testsuite has an instance of this. This |
---|
| 575 | was introduced by the repeat leg averaging added in 1.2.17. |
---|
| 576 | |
---|
| 577 | + Fix small memory leak when solving network. This doesn't really matter |
---|
| 578 | when solving at the end of processing as cavern will exit after that, but |
---|
| 579 | if *solve is used we continue processing after solving. |
---|
| 580 | |
---|
| 581 | * Remove compatibility handling for specifying a country variant of a language |
---|
| 582 | in SURVEXLANG using "-" with a lower case country code (e.g. "en-us") - we |
---|
| 583 | changed to the standard "en_US" way back in 2001. This code was mangling |
---|
| 584 | character sets with a "-" in, and is no longer useful. |
---|
| 585 | |
---|
| 586 | * Ignore any "@<something>" modifier in the language code. |
---|
| 587 | |
---|
[2d865b7] | 588 | * Improve documentation of magnetic declination handling, and cover the new |
---|
| 589 | "*DECLINATION" command. |
---|
| 590 | |
---|
[ab3b4a9] | 591 | * Document aven's command line options in the manual and its man page. |
---|
| 592 | Reported by Jenny Black. |
---|
| 593 | |
---|
| 594 | * Point to '*case' and '*truncate' from the 'SEE ALSO' sections of each other's |
---|
| 595 | documentation. |
---|
| 596 | |
---|
[22f17f1] | 597 | * Remove references to SpeleoGen from the documentation - it hasn't been |
---|
| 598 | updated for many years, and can't read recent versions of the .3d format. |
---|
| 599 | |
---|
| 600 | * Strip documentation references to obsolete versions of MS Windows. |
---|
| 601 | |
---|
[2d865b7] | 602 | * doc/HACKING.htm: Update list of debian packages to install to build from git. |
---|
| 603 | |
---|
[7027ea1] | 604 | Changes in 1.2.20 (2015-06-26): |
---|
[0eaf4b1] | 605 | |
---|
| 606 | * aven: |
---|
| 607 | |
---|
[6de8e94] | 608 | + When printing, use the top margin rather than the right margin to calculate |
---|
[31e9b72] | 609 | the height of the printable area. In practice, the two values seem to be |
---|
| 610 | the same or very similar by default. |
---|
[0eaf4b1] | 611 | |
---|
| 612 | + Avoid assertion if the about dialog image fails to load. Reported by Phil |
---|
| 613 | Maynard. |
---|
| 614 | |
---|
| 615 | + Optimise the size of the about dialog images. |
---|
| 616 | |
---|
[7027ea1] | 617 | + Add support for reading terrain data which isn't in a .zip file. |
---|
| 618 | |
---|
| 619 | + Force a refresh after loading terrain data so that it gets displayed right |
---|
| 620 | away. |
---|
| 621 | |
---|
| 622 | + Make checks for terrain data extensions in zip files case insensitive. |
---|
[6de8e94] | 623 | |
---|
| 624 | + If reading terrain data fails, always report an error and never try to |
---|
| 625 | display it. |
---|
| 626 | |
---|
| 627 | * cavern: Allow clino readings in diving style data, suggested by Andrew |
---|
| 628 | Atkinson. Currently these readings are ignored, but a future version will |
---|
| 629 | check that they're consistent with the angle given by the depth gauge and |
---|
| 630 | tape, and perform suitable averaging. |
---|
| 631 | |
---|
[0eaf4b1] | 632 | * Remove lingering traces of svxedit. |
---|
| 633 | |
---|
| 634 | * configure: Fix to allow compiling without libav/ffmpeg, as was possible |
---|
| 635 | before 1.2.19. |
---|
| 636 | |
---|
| 637 | * (Unix version): Install the filetype and aven application icons under |
---|
| 638 | /usr/share/icons/hicolor, which is where they're expected to be these days. |
---|
| 639 | |
---|
| 640 | * (Unix version): Add %f to Exec in survex-aven.desktop. |
---|
| 641 | |
---|
| 642 | * (Mac OS X version): Remove useless extra copy of about box images from OS X |
---|
| 643 | disk image. |
---|
| 644 | |
---|
[6de8e94] | 645 | * (Mac OS X version): Only ship one copy of each of the translations. |
---|
| 646 | |
---|
[0eaf4b1] | 647 | * (Mac OS X version): Reduce the size of the aven binary by disabling a load of |
---|
| 648 | libav features we don't use. |
---|
| 649 | |
---|
| 650 | * (Microsoft Windows version): Reduce the size of the aven binary by disabling |
---|
| 651 | a load of libav features we don't use. |
---|
| 652 | |
---|
| 653 | * (Microsoft Windows version): Update message files to fix a missing Chinese |
---|
| 654 | message in the installer. |
---|
| 655 | |
---|
[1dc99d1] | 656 | Changes in 1.2.19 (2015-06-18): |
---|
[f96ac93] | 657 | |
---|
| 658 | * aven: |
---|
| 659 | |
---|
| 660 | + Fix exporting to GPX, KML and HPGL, which all failed to write the header to |
---|
| 661 | the exported file in 1.2.18. |
---|
| 662 | |
---|
[2dac61e1] | 663 | + Add exporting to Survex .pos format. |
---|
| 664 | |
---|
[4b67f71] | 665 | + If the measuring line isn't currently active, pressing "Escape" will now |
---|
| 666 | exit full screen mode. |
---|
| 667 | |
---|
| 668 | + (Mac OS X version): Change the shortcut for full screen mode to be the |
---|
| 669 | standard Ctrl+Command+F (rather than Shift+Command+F which we have been |
---|
| 670 | using since 1.2.7). |
---|
[2dac61e1] | 671 | |
---|
[f96ac93] | 672 | + (Mac OS X version): When we centre the view on the station this can |
---|
| 673 | generate a mouse move event, so clear the variable which says we are |
---|
| 674 | dragging before we process a left click on a station. This avoids random |
---|
| 675 | rotations of the survey when clicking on a station, reported in #47 by Hugh |
---|
[2dac61e1] | 676 | St. Lawrence. |
---|
[f96ac93] | 677 | |
---|
| 678 | + (Mac OS X version): Force use of a non-native toolbar to stop the toolbar |
---|
| 679 | icons from being rescaled and looking fuzzy. |
---|
| 680 | |
---|
| 681 | + (Mac OS X version): Remove code added in 1.2.18 which tries to set stop the |
---|
| 682 | toolbar icons from being rescaled, but which requires an unreleased version |
---|
| 683 | of wxWidgets, had a typo in, and doesn't actually seem to work anyway. |
---|
| 684 | |
---|
| 685 | + (Mac OS X version): Drop out of full screen mode if the mouse is mode to |
---|
| 686 | the top of the screen, since we can't seem to display the menu bar in this |
---|
| 687 | case like we do on other platforms. |
---|
| 688 | |
---|
[739440f] | 689 | + (Mac OS X version): Enable aven's movie export feature. |
---|
| 690 | |
---|
[2dac61e1] | 691 | + (Mac OS X version): Enable wxDisplay when building wxWidgets to better |
---|
| 692 | support multi-monitor setups. |
---|
| 693 | |
---|
[f96ac93] | 694 | + (Mac OS X version): Silence warning visible when aven is run from a |
---|
| 695 | terminal about a missing CFBundleTypeRole. |
---|
| 696 | |
---|
[4b67f71] | 697 | + When reading terrain data from a .zip file, report an error if the .zip |
---|
| 698 | file is bad, or if it doesn't contain any terrain data we recognise. |
---|
| 699 | |
---|
[f96ac93] | 700 | + Tweak error message in terrain reading code to distinguish two failure |
---|
| 701 | cases. |
---|
| 702 | |
---|
[2dac61e1] | 703 | + Add viewing angles and scale to footer, and shorten some of the other items |
---|
| 704 | to make room for this extra information. (Fixes ticket #52, reported by |
---|
| 705 | Erin Lynch) |
---|
| 706 | |
---|
| 707 | + If the footer is wider than the printout width, scale down the font used |
---|
| 708 | so that it exactly fits; if the footer is narrower, than space out the |
---|
| 709 | items in in so it uses the full width. |
---|
[f96ac93] | 710 | |
---|
| 711 | + If the saved size for aven's window exceeds the current display size |
---|
| 712 | (mostly likely because we're now plugged into a smaller monitor), then |
---|
| 713 | reduce the size of the window to fit the display. If the saved size is < |
---|
| 714 | (480x320), increase it to at least that, as aven isn't usable in a smaller |
---|
| 715 | window. |
---|
| 716 | |
---|
[2dac61e1] | 717 | + Remove crude bodge which tries to pick a nicer initial window size when |
---|
| 718 | using wxWidgets without wxDisplay on a multi-monitor setup - aven now opens |
---|
| 719 | with the same size window it had when it was closed, so the initial size is |
---|
| 720 | only relevant on the first ever run. |
---|
[f96ac93] | 721 | |
---|
| 722 | * Assorted translation updates. Notably Indonesian is at 100% again. |
---|
| 723 | |
---|
| 724 | * Stop trying to catch and report signals. The only real reason to do it is so |
---|
| 725 | we can say "Bug in program detected! Please report this to the authors" |
---|
| 726 | before we exit, but when the program crashes that's pretty obvious. In aven |
---|
| 727 | we try to pop up a message box for this message, which may fail due to |
---|
| 728 | whatever caused the signal, while with the command line tools there's no |
---|
| 729 | great benefit over just letting the shell report the signal. |
---|
| 730 | |
---|
[4b67f71] | 731 | * Use pkg-config to probe for libav and proj, which sorts out the correct flags |
---|
| 732 | for building on OS X against a static install of libav. |
---|
| 733 | |
---|
[3f02aa4] | 734 | Changes in 1.2.18 (2015-06-03): |
---|
[2595419] | 735 | |
---|
[4a8031f] | 736 | * aven: |
---|
[a5670c7] | 737 | |
---|
[4a8031f] | 738 | + Add support for reading terrain data (from a zip file containing either an |
---|
| 739 | SRTM .hgt file, or an ESRI .bil file and associated metadata files), and |
---|
| 740 | rendering it as a transparent surface. |
---|
[a5670c7] | 741 | |
---|
[4a8031f] | 742 | + Remove actions from 'Orientation' and 'Rotation' menus which you wouldn't |
---|
| 743 | sanely want to perform from the menu. |
---|
[a5670c7] | 744 | |
---|
[4a8031f] | 745 | + Create a "Colour by" submenu of the "View" menu to house the various |
---|
| 746 | colouring options. |
---|
[a5670c7] | 747 | |
---|
[4a8031f] | 748 | + Add "Colour by Gradient" and "Colour by Length". |
---|
[a5670c7] | 749 | |
---|
[4a8031f] | 750 | + Make the button to dismiss the "About" dialog "OK" rather than "Close", |
---|
| 751 | which seems more logical, and also allows the dialog to be closed by |
---|
| 752 | pressing "Escape". |
---|
[a5670c7] | 753 | |
---|
[38e5701] | 754 | + Destroy any existing clipping region before we write the page footer. |
---|
| 755 | Hopefully solves ticket #52, reported by Erin Lynch. |
---|
| 756 | |
---|
[4a8031f] | 757 | + Don't round bearing and tilt angles to integers when printing and |
---|
| 758 | exporting. |
---|
[a5670c7] | 759 | |
---|
[38e5701] | 760 | + Add passage export for EPS format. (Partly addresses ticket #4) |
---|
| 761 | |
---|
| 762 | + Add JSON export. This should be regarded as experimental, and the format |
---|
| 763 | is quite likely to change. |
---|
| 764 | |
---|
[4a8031f] | 765 | + Pressing F6 now toggles the display of rendering stats, currently FPS |
---|
| 766 | (Frames Per Second) and the number of triangles in the terrain mesh. |
---|
[a5670c7] | 767 | |
---|
[4a8031f] | 768 | + Add a menu item and toolbar button to show the cavern log window if the |
---|
| 769 | currently shown survey data was processed by aven. Reported by Hugh St |
---|
| 770 | Lawrence in #47, and by Dave Clucas and others previously on the list. |
---|
| 771 | |
---|
| 772 | + Add "Save Log" button to Aven's cavern log window. |
---|
| 773 | |
---|
| 774 | + In cavern log window, highlight "error" markers in red and "warning" |
---|
| 775 | markers in orange. |
---|
| 776 | |
---|
| 777 | + Rework code to read cavern's output. In particular, we no longer mix |
---|
| 778 | buffered and non-buffered system calls. |
---|
| 779 | |
---|
| 780 | + Aven's support for reading colours and font sizes for printouts from |
---|
| 781 | print.ini has never worked - the contents of the ini files are ignored due |
---|
| 782 | to a bug which has been there since the code was added in 2005 - but nobody |
---|
| 783 | has ever complained. So just strip out that code entirely - we should |
---|
| 784 | support setting the colours and font sizes, but a GUI interface for setting |
---|
| 785 | them would be better. |
---|
| 786 | |
---|
| 787 | + Fix to compile with a Unicode build of wxWidgets 2.8. Reported by Bill |
---|
| 788 | Gee. |
---|
| 789 | |
---|
| 790 | + Take the width of the messages used above the compass and clino into |
---|
| 791 | account when calculating how much space to allow for them - now the labels |
---|
| 792 | won't overlap or be cut off in translations where they are long. |
---|
| 793 | |
---|
| 794 | + (Mac OS X version): Attempt to address the size of the toolbar icons. |
---|
| 795 | |
---|
| 796 | * cavern: |
---|
[0476b10] | 797 | |
---|
[38e5701] | 798 | + Reject *fix with SDs which aren't all positive. (fixes#2, reported by |
---|
| 799 | susscorfa). |
---|
| 800 | |
---|
[4a8031f] | 801 | + Use the currently set units when outputting measurements in warnings, |
---|
[38e5701] | 802 | errors, and the stats at the end of the run. Requested by Bill Gee. |
---|
[4a8031f] | 803 | |
---|
| 804 | + Include column number when a *include file isn't found. |
---|
| 805 | |
---|
| 806 | + Show 'error' in front of error messages, like we show 'warning' in front of |
---|
| 807 | warnings. Fixes #48, reported by Wookey. |
---|
| 808 | |
---|
| 809 | + Increase the threshold for warning that fore and back measurements differ |
---|
| 810 | from 2 SDs to 3 SDs. |
---|
| 811 | |
---|
| 812 | * findentrances: If the 3d file specifies the coordinate system, use it. |
---|
| 813 | |
---|
| 814 | * svxedit: Remove svxedit - while an editor with built-in knowledge of survex |
---|
| 815 | would be nice to have, svxedit doesn't really offer that, and it looks ugly |
---|
| 816 | in a modern desktop. |
---|
[a5670c7] | 817 | |
---|
[dd65182] | 818 | * If we run out of memory while reading a processed survey data file, include |
---|
| 819 | the filename in the error message. |
---|
| 820 | |
---|
[4a8031f] | 821 | * Many translation updates - notably Indonesian and Russian are now the two |
---|
| 822 | most complete translations. |
---|
[dd65182] | 823 | |
---|
[4a8031f] | 824 | * (Microsoft Windows version): Add code page 1252 mappings for fancy quotes. |
---|
[dd65182] | 825 | |
---|
[4a8031f] | 826 | * Transliterate gradient and infinity symbols if the current character set |
---|
| 827 | lacks them. |
---|
[dd65182] | 828 | |
---|
[4a8031f] | 829 | * Add SVG version of .plt icon. |
---|
| 830 | |
---|
| 831 | * Manual: |
---|
| 832 | |
---|
| 833 | + Add complete list of quantities you can set SDs for. Thanks for Wookey for |
---|
| 834 | highlighting that the previous list was incomplete. |
---|
| 835 | |
---|
| 836 | + Document averaging of a group of repeated readings. |
---|
[dd65182] | 837 | |
---|
[4a8031f] | 838 | + Add a link to the sample data from the manual. |
---|
[dd65182] | 839 | |
---|
[4a8031f] | 840 | + Remove references to contact addresses which are no longer there. Remove |
---|
| 841 | offer to post people floppies, and references to a CD image which isn't |
---|
| 842 | available for download. |
---|
| 843 | |
---|
| 844 | * Remove non-breaking spaces from the diffpos and extend manual pages, as they |
---|
| 845 | actually make the output formatting worse (presumably these used to work |
---|
| 846 | around a since-fixed bug in one of the docbook processing tools). |
---|
[2595419] | 847 | |
---|
[4a8031f] | 848 | * doc/TODO.htm: Update. |
---|
[dd65182] | 849 | |
---|
[3f02aa4] | 850 | * Fix to compile without warnings with 'g++ --std=gnu++11'. |
---|
| 851 | |
---|
[1646310] | 852 | Changes in 1.2.17 (2015-02-24): |
---|
[a6064e2] | 853 | |
---|
| 854 | * MacOS X version: |
---|
| 855 | |
---|
| 856 | + Update INSTALL file with current status. |
---|
| 857 | |
---|
[e067870] | 858 | + Aven.app now has a custom icon. |
---|
[9e053fc] | 859 | |
---|
[e067870] | 860 | + Add icons for all the filetypes supported. |
---|
| 861 | |
---|
| 862 | + Add Finder actions for .svx, .3d, .plt and .pos files. |
---|
[9e053fc] | 863 | |
---|
| 864 | + aven: Hide the status bar and tool bar in Full Screen mode, as wx doesn't |
---|
| 865 | currently do this for us. |
---|
| 866 | |
---|
[a6064e2] | 867 | + aven: Fix short-cut for toggling Full Screen mode. |
---|
| 868 | |
---|
| 869 | + aven: Make "About" menu item appear. |
---|
| 870 | |
---|
[9e053fc] | 871 | + aven: Fix "Close" button in about dialog. |
---|
| 872 | |
---|
| 873 | + aven: Make custom cursors black with a white outline to match the standard |
---|
| 874 | OS X cursor. |
---|
| 875 | |
---|
[e067870] | 876 | + svxedit: Now wrapped up in an application bundle as svxedit.app. It |
---|
| 877 | still doesn't really work like a standard app though - e.g. you can't load |
---|
| 878 | files from Finder (instead run svxedit.app and use File->Open), the font |
---|
| 879 | size of most menu items is wrong, the icon for the app is the wish icon |
---|
| 880 | rather than the svxedit icon, shortcuts use Ctrl not the Cmd key, and |
---|
| 881 | probably more. I'd probably recommend using another editor (OS X comes |
---|
| 882 | with TextEdit.app for example). |
---|
| 883 | |
---|
| 884 | + The documentation is now in a "Docs" directory alongside the apps, rather |
---|
| 885 | than in the rather less obvious "share/doc/survex" directory. |
---|
| 886 | |
---|
[a6064e2] | 887 | + Default to building for x86_64, since all modern Macs are 64 bit. |
---|
| 888 | |
---|
[9e053fc] | 889 | + Disable use of liblzma when building wxWidgets for OS X, which was |
---|
| 890 | preventing the build from working on OS X 10.6.8. |
---|
| 891 | |
---|
| 892 | + Download wx sources from SF via redirecting link. Thanks to David A. |
---|
| 893 | Riggs. |
---|
| 894 | |
---|
| 895 | + buildmacosx.sh: Handle the mount point for the disk image containing a |
---|
| 896 | space. |
---|
| 897 | |
---|
[4baea3a] | 898 | + Link with a static build of PROJ for doing coordinate system conversions. |
---|
[9e053fc] | 899 | |
---|
| 900 | + Build wx with --disable-webview to avoid a compilation failure on OS X |
---|
| 901 | 10.10.1. |
---|
| 902 | |
---|
| 903 | + Use wx-config --cc and --cxx to get the compilers to use for building |
---|
| 904 | everything else, as wx adds options to them which otherwise cause linking |
---|
| 905 | errors. |
---|
| 906 | |
---|
[4baea3a] | 907 | + The diskimage (.dmg) file is now compressed with bzip2, which gives a |
---|
| 908 | smaller download. This means OS X 10.4 is required, but we probably |
---|
| 909 | already need at least 10.5 because that's the minimum version which the |
---|
| 910 | wxWidgets build supports by default. |
---|
| 911 | |
---|
[e067870] | 912 | + Remove unused files and copies of files from the diskimage. |
---|
| 913 | |
---|
[a6064e2] | 914 | * cavern: If the same leg is repeated consecutively, average the readings and |
---|
| 915 | treat as a single leg. |
---|
| 916 | |
---|
[9e053fc] | 917 | * dump3d: Report SEPARATOR used by the file being read. |
---|
| 918 | |
---|
| 919 | * aven.svg: Fix visual glitch in SVG icon for aven. Noted by David A. Riggs. |
---|
| 920 | |
---|
| 921 | * aven: |
---|
| 922 | |
---|
| 923 | + Greatly reduce flicker when mouse is moved to the top of the screen in full |
---|
| 924 | screen mode and the menu bar reappears. |
---|
| 925 | |
---|
| 926 | + For export formats where scaling is supporting, aven now actually uses the |
---|
| 927 | scale specified in the export dialog (previously it ignored this and used |
---|
| 928 | 1:500). |
---|
| 929 | |
---|
| 930 | + Reimplement animation so that it's based on angular change per unit of |
---|
| 931 | elapsed time, rather than averaging the time take for the last two scene |
---|
| 932 | redraws. This gives smoother animation in the face of variable load and |
---|
| 933 | scene redraw time, and should be more consistent between platforms. |
---|
| 934 | |
---|
| 935 | + Switching to a point of the compass during auto-rotation now jumps straight |
---|
| 936 | there rather than the two animations fighting. |
---|
| 937 | |
---|
| 938 | + Reduce the maximum auto-rotation speed, as the previous limit was uselessly |
---|
| 939 | fast. |
---|
| 940 | |
---|
| 941 | + Disable stepping the rotation angle when animating (previously we only did |
---|
| 942 | when rotating). |
---|
| 943 | |
---|
[1646310] | 944 | + Speed up start-up a bit - rather than loading icons from individual PNG |
---|
| 945 | files on disk, compile them into the aven binary. |
---|
| 946 | |
---|
| 947 | * (Unix version): Add "MimeType" field to desktop files so that file |
---|
| 948 | associations work out of the box with modern desktop environments. |
---|
| 949 | |
---|
| 950 | * Add start of Hungarian translation from Imre Balogh. |
---|
| 951 | |
---|
| 952 | * Merge in many updates to the Russian translation from "vsuhachev". |
---|
| 953 | |
---|
| 954 | * Assorted minor updates to other translations. |
---|
| 955 | |
---|
| 956 | * Create scalable (SVG) versions of file type icons. |
---|
[e067870] | 957 | |
---|
[a6064e2] | 958 | * doc/manual.sgml: Remove $Id and $Date markers, as they don't get expanded now |
---|
| 959 | we're using git. |
---|
| 960 | |
---|
[1646310] | 961 | * tests/: Improve test coverage in a few places: |
---|
| 962 | |
---|
| 963 | + Extend tests of fore and back sights to test calibration of the back |
---|
| 964 | compass. |
---|
| 965 | |
---|
| 966 | + Test "Can't calibrate angular and length quantities together" error. |
---|
| 967 | |
---|
| 968 | + Check that "*set names ." works when "." is also the decimal point. |
---|
[a6064e2] | 969 | |
---|
[03d0e8b] | 970 | Changes in 1.2.16 (2014-10-17): |
---|
[9aa10ad] | 971 | |
---|
| 972 | * aven: Add KML export (stations only currently). |
---|
| 973 | |
---|
[f480117] | 974 | * aven: Allow measuring line to measure from anonymous stations. (Fixes #44) |
---|
| 975 | |
---|
[9aa10ad] | 976 | * aven: Fix corrupted names in exported files. |
---|
| 977 | |
---|
| 978 | * aven: Fix error log window under wxWidgets >= 2.9 to include the system |
---|
| 979 | information before the first log message like it does under wxWidgets 2.8. |
---|
| 980 | |
---|
| 981 | * cavern: Add support for "*cs JTSK" and "*cs JTSK03". |
---|
| 982 | |
---|
| 983 | * tests/: Improve test coverage. |
---|
| 984 | |
---|
[7bd113b] | 985 | * Translation updates for many languages, plus the start of translations to |
---|
| 986 | Greek and Polish. |
---|
[9aa10ad] | 987 | |
---|
| 988 | * Fix to build against wxWidgets 3.0 built with assertions disabled. Reported |
---|
| 989 | by Martin Sluka. |
---|
| 990 | |
---|
| 991 | * Fix warnings when compiling with clang (which is the default compiler on |
---|
| 992 | Mac OS X). Reported by Martin Sluka. |
---|
| 993 | |
---|
[44f51ca] | 994 | Changes in 1.2.15 (2014-08-14): |
---|
| 995 | |
---|
| 996 | * cavern: The *cs command now also supports "long-lat", "s-merc" (for "Web |
---|
| 997 | Mercator"), EPSG and ESRI codes, "eur79z30", "ijtsk" and "ijtsk03". This |
---|
| 998 | means that we now support all the coordinates systems which Therion does, |
---|
| 999 | except for a few which don't have X=East and Y=North. The documentation |
---|
| 1000 | for *cs has also been improved. |
---|
| 1001 | |
---|
| 1002 | * aven: We no longer persist full screen mode between runs - it's not a |
---|
| 1003 | standard behaviour of desktop programs, and it's too easy to go into full |
---|
| 1004 | screen mode from the menu and then not be able to get out again because you |
---|
| 1005 | don't know the required key shortcut. (ticket#39) |
---|
| 1006 | |
---|
| 1007 | * aven: When in full screen mode, moving the mouse to the top of the screen now |
---|
| 1008 | makes the menu bar appear. This provides a non-shortcut way out of full |
---|
| 1009 | screen mode, as well as making it easier to perform other operations while in |
---|
| 1010 | full screen mode. The current implementation gives an annoyingly flickery |
---|
| 1011 | transition, but hopefully we can improve this in future. (ticket#39) |
---|
| 1012 | |
---|
| 1013 | * (MacOS X version): If built with wxWidgets >= 3.1.0 (which is still in |
---|
| 1014 | development), we now call EnableFullScreenView() which improves the full |
---|
| 1015 | screen mode experience on OS X 10.7 and later. |
---|
| 1016 | |
---|
| 1017 | * img library: Improve documentation for img_ERROR_INFO. |
---|
| 1018 | |
---|
| 1019 | * tests/: Ship some missing .out files and compare.tst. |
---|
| 1020 | |
---|
| 1021 | * tests/: cavern.tst testcase back2 is now actually used. Fix a bug in this |
---|
| 1022 | testcase, and extend it to cover a variant of the situation reported as a bug |
---|
| 1023 | in therion by Bill Gee to the therion list. |
---|
| 1024 | |
---|
| 1025 | * (Linux version) survex.spec: Add run-time requirement on proj and proj-epsg |
---|
| 1026 | for the survex package and on tk for the svxedit package. |
---|
| 1027 | |
---|
[6a87cce] | 1028 | Changes in 1.2.14 (2014-07-05): |
---|
[5c676e2] | 1029 | |
---|
[1efeb6d] | 1030 | * img library: Add ability to store a PROJ4 string describing the coordinate |
---|
| 1031 | system in use in 3d v8 files. |
---|
| 1032 | |
---|
| 1033 | * aven: If the 3d file specifies a coordinate system, then use it for exporting |
---|
| 1034 | to formats which need to know (currently GPX). If the input file doesn't |
---|
[6a87cce] | 1035 | specify the coordinate system, allow the user to enter a PROJ4 string in the |
---|
| 1036 | export dialog. |
---|
[1efeb6d] | 1037 | |
---|
[ea59b58] | 1038 | * aven: You can now quickly zoom to a particular area by holding down the |
---|
| 1039 | "Shift" key and dragging with the left mouse button to create a rectangular |
---|
| 1040 | "rubber band box" around the area you wish to zoom to. If you release the |
---|
| 1041 | "Shift" key while still dragging, the box is centred on the start point |
---|
| 1042 | rather than having one corner there. |
---|
| 1043 | |
---|
[26e7fa4] | 1044 | * aven: Fix exporting of passage tubes in elevations and extended elevations |
---|
| 1045 | - previously up and down were getting drawn across the page! |
---|
| 1046 | |
---|
[5c676e2] | 1047 | * aven: Fix "Cancel" to work on the print/export dialog, broken by changes in |
---|
| 1048 | 1.2.13. (Reported by Brian Clipstone) |
---|
| 1049 | |
---|
[515b83e] | 1050 | * aven: Fix the conditions on which the menu item "Cancel measuring line" is |
---|
| 1051 | enabled - previously it was hard to actually cancel it via the menu. |
---|
| 1052 | Reported by Hugh St Lawrence. |
---|
| 1053 | |
---|
[5c676e2] | 1054 | * aven: Fix wx assertion failures when showing hit test debug view on platforms |
---|
| 1055 | such as 64-bit Linux. |
---|
| 1056 | |
---|
[2c5ec88] | 1057 | * aven: When viewing from above, show "Plan" above the "clino" which indicates |
---|
| 1058 | the tilt angle (instead of "Elevation -90°"). |
---|
| 1059 | |
---|
[5c676e2] | 1060 | * aven: The extended font data now loads faster, and also uses less memory on |
---|
| 1061 | 64-bit platforms. |
---|
| 1062 | |
---|
[ea59b58] | 1063 | * aven: Dragging the vertical divider between the side panel and the 3D view |
---|
| 1064 | now only updates when you finish the drag, as redrawing continuously just |
---|
| 1065 | looks clunky except on an ultra-fast machine. |
---|
| 1066 | |
---|
[2c5ec88] | 1067 | * aven: (German translation) Abbreviate "Blickrichtung" so it doesn't overfill |
---|
| 1068 | the space available in the aven UI. |
---|
| 1069 | |
---|
[1efeb6d] | 1070 | * cavern: Add a *cs command to allow setting the coordinate system for *fix |
---|
| 1071 | commands, and the coordinate system used for processed survey data. The |
---|
| 1072 | latter is now stored in 3d v8 format files. |
---|
[ea59b58] | 1073 | |
---|
[515b83e] | 1074 | * cavern: Add support for 'L' flag (exclude from length) in Compass .dat files |
---|
| 1075 | and handle it in the same way as the "DUPLICATE" flag in .svx files. |
---|
| 1076 | |
---|
[6a87cce] | 1077 | * cavern: If there's more than one *fix command with coordinates, still |
---|
| 1078 | actually fix the second and subsequent ones, to avoid triggering bogus errors |
---|
| 1079 | about unconnected surveys. |
---|
| 1080 | |
---|
| 1081 | * cavern: If there's more than one *fix command with coordinates, report the |
---|
| 1082 | station name of the previous one, plus the file and line number where it was. |
---|
| 1083 | |
---|
[67a0fc6] | 1084 | * cavern: Fix handling of the rather contrived case of *fix with no coordinates |
---|
| 1085 | followed by *solve and then another *fix with no coordinates not to access |
---|
| 1086 | freed memory. |
---|
| 1087 | |
---|
[1efeb6d] | 1088 | * dump3d: Report any specified coordinate system. |
---|
| 1089 | |
---|
| 1090 | * doc/3dformat.htm: Update to document how the coordinate system is stored. |
---|
| 1091 | |
---|
[2c5ec88] | 1092 | * (Microsoft Windows version): Include dump3d in the installer. |
---|
| 1093 | |
---|
[5c676e2] | 1094 | * Fix a compiler warning. |
---|
| 1095 | |
---|
| 1096 | * Improve test coverage. |
---|
| 1097 | |
---|
[0d365be] | 1098 | Changes in 1.2.13 (2014-05-15): |
---|
[acbb5b1] | 1099 | |
---|
[8ccd1d8] | 1100 | * aven: Fix --print option to wait for printing to happen before exiting |
---|
| 1101 | (previously it would exit right after opening the print dialog, so you |
---|
| 1102 | couldn't actually print anything out using it). |
---|
| 1103 | |
---|
[acbb5b1] | 1104 | * aven: Increase the threshold for how close the pointer needs to be to a |
---|
| 1105 | station from 5 pixels to 7 to try to help touchscreen users. Reported by |
---|
| 1106 | Hugh St Lawrence. |
---|
| 1107 | |
---|
[0d365be] | 1108 | * aven: Add "fat finger" mode, toggled by pressing F2, to allow investigating |
---|
[8ccd1d8] | 1109 | if increasing the minimum pointer to station threshold helps Hugh's problems |
---|
| 1110 | with using aven on a touch screen device. |
---|
| 1111 | |
---|
[acbb5b1] | 1112 | * aven: The measuring line was unable to see stations which had just been |
---|
| 1113 | revealed by toggling surface or underground legs on - this is now fixed. |
---|
| 1114 | |
---|
| 1115 | * aven: Add "hit test grid debug" mode, which shows the hit test grid and how |
---|
| 1116 | many entries are in each box (toggled by F3). |
---|
| 1117 | |
---|
| 1118 | * aven: Pressing F4 now allows the user to toggle wxWidgets assertion messages |
---|
| 1119 | off and back on. |
---|
| 1120 | |
---|
| 1121 | * aven: Create the empty hit-test grid data structure lazily, to reduce start |
---|
| 1122 | up time a little. |
---|
| 1123 | |
---|
| 1124 | * cavern: Improve messages which talk about "tags" and/or "prefixes" in *begin |
---|
| 1125 | and *end commands to instead talk about "survey names". |
---|
| 1126 | |
---|
| 1127 | * cavern: For ages cavern has warned if you reentered a survey, but this |
---|
| 1128 | warning was suppressed if it occurred at the same line of the same file as |
---|
| 1129 | the survey was first entered, but this can only happen if you include the |
---|
| 1130 | same survey file more than once, which isn't a sensible thing to do for a |
---|
| 1131 | file with actual survey data in (you might reasonably do it to set up survey |
---|
| 1132 | grade details or something like that). The warning is now given in this |
---|
| 1133 | situation too. |
---|
| 1134 | |
---|
| 1135 | * cavern: After 5 warnings about reentering a survey we give up warning about |
---|
| 1136 | it, but we used to keep reporting where the survey was originally entered - |
---|
| 1137 | this secondary diagnostic message is now silenced when the main message is. |
---|
| 1138 | |
---|
| 1139 | * (Microsoft Windows version): Compile C code with optimisation on. |
---|
| 1140 | |
---|
| 1141 | * Add the start of a Russian translation, with messages take from therion. |
---|
| 1142 | |
---|
| 1143 | * Minor translation updates to French. |
---|
| 1144 | |
---|
| 1145 | * Fix compiler warning from GCC. |
---|
| 1146 | |
---|
| 1147 | * Testsuite improvements: |
---|
| 1148 | |
---|
| 1149 | + Test that "..." anon station works. |
---|
| 1150 | |
---|
| 1151 | + cavern.tst: Check number of errors returned by all testcases which should |
---|
| 1152 | fail and give an error count. |
---|
| 1153 | |
---|
| 1154 | + cavern.tst: Fix to actually fully test everything when builddir != srcdir. |
---|
| 1155 | |
---|
[ad727d8] | 1156 | Changes in 1.2.12 (2014-04-14): |
---|
[46d12e9] | 1157 | |
---|
[63e8642] | 1158 | * aven: Fix measuring line to show change in altitude rather than altitude |
---|
| 1159 | itself (accidentally broken by changes in 1.2.11). Reported by Brian |
---|
| 1160 | Clipstone. |
---|
[46d12e9] | 1161 | |
---|
[ad727d8] | 1162 | * aven: Fix printing when built with wxWidgets 3.0. |
---|
| 1163 | |
---|
| 1164 | * aven: Several visual improvements to printouts: |
---|
| 1165 | |
---|
| 1166 | + Move the numbers below the scale bar down a little so that they don't |
---|
| 1167 | overlap the scale bar ticks. |
---|
| 1168 | |
---|
| 1169 | + Set the clipping region after we draw the page border and info box to avoid |
---|
| 1170 | clipping the border in print preview. |
---|
| 1171 | |
---|
| 1172 | + Tidy up the appearance of the compass and elevation arrow. |
---|
| 1173 | |
---|
[63e8642] | 1174 | * aven: Fix to build with libav 10. Reported by Moritz Muehlenhoff in |
---|
| 1175 | <http://bugs.debian.org/739332>. |
---|
[46d12e9] | 1176 | |
---|
[63e8642] | 1177 | * aven: Fix to build with older libav where avcodec_free_frame() isn't |
---|
| 1178 | available. |
---|
[46d12e9] | 1179 | |
---|
[ad727d8] | 1180 | * (Linux version) survex.spec: Update spec file used for building RPM packages. |
---|
| 1181 | |
---|
| 1182 | * (Unix version): Add "Keywords:" entry to .desktop files. |
---|
| 1183 | |
---|
| 1184 | * (Unix version): Enable large file support, mostly to support filing systems |
---|
| 1185 | which return 64 bit inode values, such as CIFS mounts. |
---|
| 1186 | |
---|
[63e8642] | 1187 | * (Microsoft Windows version): Only allow "A-Z" or "a-z" for driver letters, |
---|
| 1188 | rather than any character which is a letter in the current locale. |
---|
[46d12e9] | 1189 | |
---|
[63e8642] | 1190 | * Various translation updates. |
---|
[46d12e9] | 1191 | |
---|
[aac3336] | 1192 | Changes in 1.2.11 (2014-01-28): |
---|
[fb941bfd] | 1193 | |
---|
| 1194 | * aven: Fix wxWidgets assertion when double clicking on an anonymous station. |
---|
| 1195 | Reported by Kevin Dixon. |
---|
| 1196 | |
---|
[aac3336] | 1197 | * aven: Embed the font data for the first 256 Unicode characters for use in the |
---|
| 1198 | survey pane into the compiled aven binary to reduce start up overhead. Any |
---|
| 1199 | additional characters needed are loaded from a data file only if/when a |
---|
| 1200 | character >= U+100 is actually needed (as before). |
---|
| 1201 | |
---|
[ad3017d] | 1202 | * aven: Fix display of Unicode characters above 256 when there's a character |
---|
| 1203 | <= 256 earlier in the same string. |
---|
| 1204 | |
---|
[77bdacf] | 1205 | * aven: Use the actual width of Unicode characters above 256 rather than |
---|
| 1206 | assuming they are 16 pixels wide. |
---|
[ad3017d] | 1207 | |
---|
| 1208 | * aven: If full screen, don't show the side panel when a new file is opened |
---|
| 1209 | (e.g. via Ctrl+O). |
---|
| 1210 | |
---|
| 1211 | * aven: Don't give an assertion failure when showing passages for a cave with |
---|
| 1212 | no vertical extent. Reported by Jonny Prouty. |
---|
| 1213 | |
---|
| 1214 | * aven: Change terminology in print dialog - say "legend" instead of "info |
---|
| 1215 | box". |
---|
| 1216 | |
---|
| 1217 | * aven: Add option to show the tilt angle as a percentage gradient. |
---|
| 1218 | |
---|
| 1219 | * aven: Show the units (degrees, grads, or percent) for the tilt and bearing |
---|
| 1220 | indicators. |
---|
| 1221 | |
---|
| 1222 | * aven: All length units are now translatable. |
---|
| 1223 | |
---|
[fb941bfd] | 1224 | * aven: Split log_fl_error helper function out of CHECK_GL_ERROR macro, which |
---|
| 1225 | will reduce code size and also the number of deprecation warnings about |
---|
| 1226 | gluErrorString on Mac OS X 10.9. |
---|
| 1227 | |
---|
[ad3017d] | 1228 | * (Microsoft Windows version): aven: Try to work around redraw issues related |
---|
| 1229 | to the measuring line by redrawing the whole window, which doesn't seem to be |
---|
| 1230 | measurably slower. |
---|
| 1231 | |
---|
| 1232 | * cavern: If *units is used to try to set units for LEVEL, PLUMB, or POSITION, |
---|
| 1233 | give an error rather than quietly ignoring the attempt. |
---|
| 1234 | |
---|
[77bdacf] | 1235 | * cad3d: Make cad3d remap control characters and spaces in station names when |
---|
| 1236 | generating PLT output in the same way aven does. |
---|
| 1237 | |
---|
[ad3017d] | 1238 | * Various translation updates (particular thanks to Eric Madelaine and Dennis |
---|
| 1239 | Baudys), including the start of a Bulgarian translation, with messages taken |
---|
| 1240 | from Therion and elsewhere. |
---|
| 1241 | |
---|
| 1242 | * (Microsoft Windows version): On Microsoft Windows 2000 and newer, use |
---|
| 1243 | GetUserDefaultUILanguage() to get the UI language to use. For older |
---|
| 1244 | versions, continue to use GetUserDefaultLCID(). |
---|
[fb941bfd] | 1245 | |
---|
| 1246 | * (Microsoft Windows version): The Indonesian translation will now be used |
---|
| 1247 | automatically when the system language is set to Indonesian. |
---|
| 1248 | |
---|
| 1249 | * (Mac OS X version): Fix to build with wx 3.0.0 on OS X 10.9. Thanks to David |
---|
| 1250 | A. Riggs for his work on this. |
---|
| 1251 | |
---|
| 1252 | * (Mac OS X version): Update buildmacosx.sh script to use wx 3.0.0, and add a |
---|
| 1253 | checksum check for the downloaded wx sources. |
---|
| 1254 | |
---|
| 1255 | * Fix a lot of the compiler warnings when building with clang. |
---|
| 1256 | |
---|
[ad3017d] | 1257 | * doc/manual.sgml: Add missing quantities to the list documented as accepted by |
---|
| 1258 | *units: LEFT, RIGHT, UP/CEILING, DOWN/FLOOR (missing entirely); |
---|
| 1259 | BACKCOMPASS/BACKBEARING, BACKCLINO/BACKGRADIENT (missing from the main list, |
---|
| 1260 | mentioned in list of the units that can be set for them); COUNT (missing |
---|
| 1261 | alternative name for COUNTER); DX/EASTING, DY/NORTHING, DZ/ALTITUDE |
---|
| 1262 | (incorrectly listed as X, Y, Z). Reported by Jonny Prouty. |
---|
| 1263 | |
---|
| 1264 | * Test suite: Improve test coverage for cavern. |
---|
| 1265 | |
---|
[0ecf3b1] | 1266 | Changes in 1.2.10 (2014-01-15): |
---|
| 1267 | |
---|
| 1268 | * aven: Fix assertion if two mouse buttons are held down at the same time. |
---|
| 1269 | If dragging with more than one mouse button held down, releasing one causes |
---|
| 1270 | another which is still held down to take effect. Reported by Brian |
---|
| 1271 | Clipstone. |
---|
| 1272 | |
---|
[53966d3] | 1273 | * aven: If we fail to start the external editor when the user clicks on an |
---|
| 1274 | error or warning from cavern, show an error box. |
---|
| 1275 | |
---|
[6f0d0d8] | 1276 | * aven: If the survey has a title, add it as a top-level <title> element to |
---|
| 1277 | exported SVG files. |
---|
| 1278 | |
---|
| 1279 | * aven: Escape '<', '>', and '&' in labels in exported SVG files. |
---|
| 1280 | |
---|
| 1281 | * aven: In GPX export, set the <time> element to the datestamp from the 3d |
---|
| 1282 | file. |
---|
| 1283 | |
---|
| 1284 | * aven: Don't try to write the title if it isn't set or is empty when exporting |
---|
| 1285 | GPX files. |
---|
| 1286 | |
---|
| 1287 | * aven: Don't bother looking up the printer page setup info when exporting. |
---|
| 1288 | |
---|
[0ecf3b1] | 1289 | * (Microsoft Windows version): aven: Fix crash on "File->Print" or |
---|
| 1290 | "File->Export" under Windows XP, reported by Brian Clipstone. |
---|
| 1291 | |
---|
| 1292 | * (Microsoft Windows version): aven: Fix error dialog about an incorrectly |
---|
| 1293 | encoded filename which could occur if run without being asked to load a file |
---|
| 1294 | on startup. |
---|
| 1295 | |
---|
| 1296 | * (Microsoft Windows version): aven: Compile with optimisation on. |
---|
| 1297 | |
---|
| 1298 | * img library, aven: Although processed CMAP data files are often referred to |
---|
| 1299 | as "CMAP .XYZ files", it seems that actually, the extension .XYZ isn't used, |
---|
| 1300 | rather .SHT (shot variant, produced by CMAP v16 and later), .UNA (unadjusted) |
---|
| 1301 | and .ADJ (adjusted) extensions are. Since we've long checked for .XYZ, we |
---|
| 1302 | continue to do so in case anyone is relying on it, but also check for the |
---|
| 1303 | other extensions. |
---|
| 1304 | |
---|
| 1305 | * img library: Add new "datestamp_numeric" field to struct img giving the |
---|
| 1306 | datestamp as a time_t in UTC (or (time_t)-1 if there's no datestamp or we |
---|
| 1307 | failed to convert it). For .3d >= v8, this field is reliable. We attempt to |
---|
| 1308 | convert date strings in .3d <= v7 and CMAP XYZ files, but may get the |
---|
| 1309 | timezone wrong. |
---|
| 1310 | |
---|
| 1311 | * img library: Fix my_strcasecmp() to handle top-bit set characters better. |
---|
| 1312 | |
---|
[6f0d0d8] | 1313 | * cavern: Fix NULL pointer dereference when processing Compass DAT file without |
---|
| 1314 | 'SURVEY DATE:'. |
---|
[0ecf3b1] | 1315 | |
---|
[6f0d0d8] | 1316 | * doc/manual.sgml: Update references to Survex 1.1 which should be to 1.2. |
---|
[0ecf3b1] | 1317 | |
---|
[6f0d0d8] | 1318 | * doc/manual.sgml: Note the station length limit Smaps used. |
---|
[0ecf3b1] | 1319 | |
---|
[53966d3] | 1320 | * Fix some compiler warnings if built with glibc's fortify source feature |
---|
| 1321 | enabled. |
---|
| 1322 | |
---|
[6b6fb4d] | 1323 | Changes in 1.2.9 (2014-01-08): |
---|
| 1324 | |
---|
| 1325 | * Document --3d-version in cavern man page and the manual. |
---|
| 1326 | |
---|
| 1327 | * aven: Fix compilation error in movie export code with recent libavi. |
---|
| 1328 | |
---|
| 1329 | * aven: Fix warning on stderr when export a movie as MPEG. |
---|
| 1330 | |
---|
| 1331 | * img library: In non-hosted mode, don't define GETC and PUTC if they're |
---|
| 1332 | already defined, to allow easy overriding with getc_unlocked() and |
---|
| 1333 | putc_unlocked() (which are significantly faster on Linux). |
---|
| 1334 | |
---|
| 1335 | * img library: In non-hosted mode, check that int is at least 32 bits, |
---|
| 1336 | and if not, use long. In practice, platforms with 16 bit int are mostly |
---|
| 1337 | obsolete, but it's not hard to be portable here. |
---|
| 1338 | |
---|
| 1339 | * img library: Add test that img.c and img.h compile in non-hosted mode |
---|
| 1340 | (regression test for issue fixed in 1.2.8). |
---|
| 1341 | |
---|
| 1342 | * (Microsoft Windows version): aven is now built with wxWidgets 3.0.0. |
---|
| 1343 | |
---|
| 1344 | * Update translations from launchpad and from existing similar messages. |
---|
| 1345 | |
---|
| 1346 | * Fix some compiler warnings. |
---|
| 1347 | |
---|
[e1f27c4] | 1348 | Changes in 1.2.8 (2013-10-29): |
---|
[da65891] | 1349 | |
---|
| 1350 | * cavern: Fix handling of anonymous wall stations ('..' by default) to |
---|
| 1351 | implicitly set the SPLAY leg flag, as was intended. Reported by Thomas |
---|
| 1352 | Holder. |
---|
| 1353 | |
---|
[e1f27c4] | 1354 | * cavern: Tweak .err file output not to lose the space in front of certain |
---|
[034141d] | 1355 | statistics when the value gets large. |
---|
| 1356 | |
---|
[a4adf09] | 1357 | * cavern: Eliminate redundant progress message when solving simultaneous |
---|
| 1358 | equations. |
---|
| 1359 | |
---|
[e1f27c4] | 1360 | * aven: Add a format drop down to the export dialog, and only show fields which |
---|
| 1361 | are meaningful and supported for the currently selected export format. The |
---|
| 1362 | format defaults to that used most recently. The "Elements" and "View" boxes |
---|
| 1363 | have been swapped in the print and export dialogs as that layout works much |
---|
| 1364 | better when the "View" box is hidden. |
---|
| 1365 | |
---|
[0056ee1] | 1366 | * aven: Changing checkboxes in the print or export dialog didn't work in 1.2.7 |
---|
| 1367 | - now works again. Reported by Anthony Day. |
---|
| 1368 | |
---|
[e1f27c4] | 1369 | * aven: Add GPX export (based on findentrances patch from Olaf Kähler). In |
---|
| 1370 | this release the projection which the survey coordinates are in defaults |
---|
| 1371 | to the BMN M31 grid used in the Totes Gebirge in Austria. On Unix, you |
---|
| 1372 | can edit ~/.aven and add a new line setting 'input_projection' to a PROJ |
---|
| 1373 | projection string. The ability to specify this projection in a better |
---|
| 1374 | way is coming soon. |
---|
| 1375 | |
---|
| 1376 | * aven: New export options "Origin in centre" and "Full coordinates" - the |
---|
| 1377 | latter fixes #10. GPX and PLT output implicitly force "full coordinates". |
---|
| 1378 | |
---|
| 1379 | * aven: The "Sketch" vector drawing program got renamed to "Skencil" some |
---|
| 1380 | time ago, so update references. |
---|
| 1381 | |
---|
| 1382 | * aven: Make the Presentation->Play menu item a checkbox, to avoid a warning |
---|
| 1383 | with wxMSW 2.9.5. Reported by Brian Clipstone. |
---|
| 1384 | |
---|
| 1385 | * aven: Make right click in an empty presentation mark the current position and |
---|
| 1386 | open it to edit, instead of crashing. |
---|
| 1387 | |
---|
| 1388 | * aven: Update movie export code to work with latest libav API. Reported by |
---|
| 1389 | Sebastian Ramacher. |
---|
| 1390 | |
---|
| 1391 | * aven: Improve reporting of errors during the process of exporting a movie. |
---|
| 1392 | |
---|
| 1393 | * aven: Don't try to close the movie if we aren't producing one. |
---|
| 1394 | |
---|
| 1395 | * aven: Fix assertion failure when double-clicking on the survey with wx2.9. |
---|
| 1396 | |
---|
| 1397 | * aven: Fix to build with wxMSW 2.9.5. |
---|
| 1398 | |
---|
| 1399 | * aven: Fix to build with wx 2.9.5 with wx2.8 compatibility disabled. |
---|
| 1400 | |
---|
| 1401 | * cad3d: The "Sketch" vector drawing program got renamed to "Skencil" some time |
---|
| 1402 | ago, so add a new --skencil option to specify this output format. The old |
---|
| 1403 | name (--sketch) is still recognised for compatibility. |
---|
| 1404 | |
---|
| 1405 | * cad3d: Make --marker-size work for Skencil and SVG output. |
---|
| 1406 | |
---|
| 1407 | * dump3d: Make --show-dates option show dates for XSECT. |
---|
[9fc1cac] | 1408 | |
---|
[88b54df6] | 1409 | * img library: |
---|
| 1410 | |
---|
[e1f27c4] | 1411 | + Fix to work once more when used outside of Survex (missing definition of |
---|
| 1412 | max() macro and a bad call to free() in img_close() for a file opened for |
---|
| 1413 | reading). |
---|
| 1414 | |
---|
| 1415 | + Use lround() instead of round(), and make the tests around whether we use |
---|
| 1416 | the library function or the our fallback implementation saner. |
---|
| 1417 | |
---|
| 1418 | + Fix // comments in C code for portability to pre-C99 compilers which don't |
---|
| 1419 | support these as an extension. |
---|
[88b54df6] | 1420 | |
---|
[f807d8bf] | 1421 | + Can now be compiled as C++ as well as as C. |
---|
| 1422 | |
---|
[e1f27c4] | 1423 | * (Microsoft Windows version): The installer is now built with a newer version |
---|
| 1424 | of Innosetup, and includes translations for all the languages which Survex |
---|
| 1425 | itself has any translations for. |
---|
| 1426 | |
---|
| 1427 | * (Microsoft Windows version): aven is now built with wxWidgets 2.9.5. |
---|
| 1428 | |
---|
| 1429 | * Minor translation updates. |
---|
| 1430 | |
---|
| 1431 | * tests/Makefile.am: Distribute files for "normal_bad" testcase. |
---|
| 1432 | |
---|
[e34bebc] | 1433 | Changes in 1.2.7 (2013-07-27): |
---|
[65d9b6b] | 1434 | |
---|
[e34bebc] | 1435 | * Add support for anonymous stations, which are indicated by one, two or three |
---|
| 1436 | separator characters - with the default separator of '.', that means '.', |
---|
| 1437 | '..', and '...' are anonymous stations. Single separator ('.' by default) |
---|
| 1438 | is an anonymous non-wall point, double separator ('..' by default) |
---|
| 1439 | is an anoymous wall point at the end of an implicit splay), and triple |
---|
| 1440 | separator ('...' by default) is an anoymous point (with nothing special about |
---|
| 1441 | the leg). A new *alias command allows '-' to be mapped to '..' for |
---|
| 1442 | compatibility with pocket topo: *alias station - .. |
---|
[07beaa4] | 1443 | |
---|
[e34bebc] | 1444 | * New version 8 of the 3d format: |
---|
[07beaa4] | 1445 | |
---|
[e34bebc] | 1446 | + Supports new flags img_SFLAG_ANON and img_SFLAG_WALL. |
---|
[07beaa4] | 1447 | |
---|
[e34bebc] | 1448 | + New explicit file-wide flag for 'this is an extended elevation', rather |
---|
| 1449 | than modifying the survey title to indicate this. |
---|
[da9d788] | 1450 | |
---|
[e34bebc] | 1451 | + The survey prefix is often unchanged from one leg to the next, so use a |
---|
| 1452 | spare flag to compactly indicate when there's no label change. |
---|
[da9d788] | 1453 | |
---|
[e34bebc] | 1454 | + The data style of each leg is now stored. |
---|
[da9d788] | 1455 | |
---|
[e34bebc] | 1456 | + The "processed at" time is stored as seconds since 1970 rather than a |
---|
| 1457 | human-readable string. |
---|
[da9d788] | 1458 | |
---|
[e34bebc] | 1459 | + Since 3d v8 features significant changes to the format, the format |
---|
| 1460 | documentation for v7 and earlier has been split off into 3dformat-old.htm. |
---|
[da9d788] | 1461 | |
---|
[e34bebc] | 1462 | * img library: |
---|
[da9d788] | 1463 | |
---|
[e34bebc] | 1464 | + New station flags img_SFLAG_ANON and img_SFLAG_WALL. |
---|
[da9d788] | 1465 | |
---|
[e34bebc] | 1466 | + Handle .pos files containing unnamed stations - don't suck the next line in |
---|
| 1467 | as the station name, and set img_SFLAG_ANON for them. |
---|
[da9d788] | 1468 | |
---|
[e34bebc] | 1469 | + Repurpose the long unused fBinary parameter to img_open_write() as a flags |
---|
| 1470 | parameter, and add img_FFLAG_EXTENDED to specify that this is an extended |
---|
| 1471 | elevation, in place of appending " (extended)" to the title. Internally we |
---|
| 1472 | still append this to the title (and remove it upon reading) when writing |
---|
| 1473 | 3d v7 or earlier, but for the new 3d v8 format, this flag is stored |
---|
| 1474 | explicitly in the file. |
---|
[da9d788] | 1475 | |
---|
[e34bebc] | 1476 | + img.h: Add comments for the lists of "Leg flags" and "Station flags". |
---|
[da9d788] | 1477 | |
---|
[e34bebc] | 1478 | * aven: |
---|
[da9d788] | 1479 | |
---|
[e34bebc] | 1480 | + We now require at least wxWidgets 2.8.0 - it was released over 6 years ago |
---|
| 1481 | now, and the wx developers consider even 2.8 to be rather long in the |
---|
| 1482 | tooth. We stopped testing building with wxWidgets 2.6 some time ago, and |
---|
| 1483 | formally dropping support for older versions allows a number of workarounds |
---|
| 1484 | to be removed from the aven source code. Also, features deprecated in |
---|
| 1485 | wxWidgets 2.9 are no longer used in our code. |
---|
[da9d788] | 1486 | |
---|
[e34bebc] | 1487 | + Don't run incremental search on every key-press, as on a slow machine the |
---|
| 1488 | short initial search(es) will take a while but not be useful. Instead only |
---|
| 1489 | actually run the search when we're told there are no more key-presses |
---|
| 1490 | queued up. |
---|
[da9d788] | 1491 | |
---|
[e34bebc] | 1492 | + Implement support for including cross-section information in exported SVG |
---|
| 1493 | and DXF files (ticket#4). The DXF export is untested currently. |
---|
| 1494 | |
---|
| 1495 | + Show splay legs faded by default, with menu options to hide them or show |
---|
| 1496 | them like other legs. |
---|
| 1497 | |
---|
| 1498 | + Speed up loading a .3d file with cross-sections by using a map to convert |
---|
| 1499 | station names to positions. |
---|
| 1500 | |
---|
| 1501 | + In the cavern log window, don't highlight a file:linenumber if there's no |
---|
| 1502 | message after it, which avoids highlighting the "Included from" lines |
---|
| 1503 | wrongly. |
---|
| 1504 | |
---|
| 1505 | + Fix not to crash when trying to report an error while starting up. |
---|
| 1506 | |
---|
| 1507 | + (MacOS X version): Change the menu shortcut for "Full Screen Mode" to be |
---|
| 1508 | the OS X standard shortcut Shift-Command-F (previously we used F11, but |
---|
| 1509 | that's used by the desktop). |
---|
| 1510 | |
---|
| 1511 | + Add checks for errors when reading the font file. |
---|
[07beaa4] | 1512 | |
---|
[e34bebc] | 1513 | + Remove useless extra quoting when invoking vim to show the location of an |
---|
| 1514 | error from cavern. |
---|
[07beaa4] | 1515 | |
---|
[e34bebc] | 1516 | + Include GL/gl.h before GL/glext.h (needed on Debian wheezy). |
---|
[da9d788] | 1517 | |
---|
[e34bebc] | 1518 | + Use wxValidator to simplify keeping svxPrintDlg member variables and fields |
---|
| 1519 | in the dialog in sync. |
---|
[da9d788] | 1520 | |
---|
[e34bebc] | 1521 | * cavern: |
---|
[3dfffa2] | 1522 | |
---|
[e34bebc] | 1523 | + Demote errors about invalid dates to warnings, since we've accepted *date |
---|
| 1524 | for ages without any checks on the value, and so existing datasets |
---|
| 1525 | probably contain invalid dates and dates in other formats. (ticket#19) |
---|
[3dfffa2] | 1526 | |
---|
[e34bebc] | 1527 | + New *alias command allows '-' to be mapped to '..' for compatibility with |
---|
| 1528 | pocket topo: *alias station - .. |
---|
[07beaa4] | 1529 | |
---|
[e34bebc] | 1530 | + We want to warn if there's a clino reading which it would be impossible to |
---|
| 1531 | have read from the instrument (e.g. on a -90 to 90 degree scale you can't |
---|
| 1532 | read "93" (it's probably a typo e.g. for "39"). However, the gradient |
---|
| 1533 | reading from a topofil is typically in the range 0 to 180, with 90 being |
---|
| 1534 | horizontal. Really we should allow the valid range to be explicitly |
---|
| 1535 | specified, but for now we infer it from the zero error - if this is within |
---|
| 1536 | 45 degrees of 90 then we assume the instrument can read between 0 and 180 |
---|
| 1537 | degrees. |
---|
[da9d788] | 1538 | |
---|
[e34bebc] | 1539 | + If the survey isn't all connected, still run survey tree checks and report |
---|
| 1540 | errors and/or warnings which might suggest typo locations. Thanks to Kevin |
---|
| 1541 | Dixon for the report which highlighted this issue. |
---|
[da9d788] | 1542 | |
---|
[e34bebc] | 1543 | + Report a warning if *begin SURVEY has a separator character in SURVEY. |
---|
[da9d788] | 1544 | |
---|
[e34bebc] | 1545 | + Report column numbers as well as line numbers for some cavern errors and |
---|
| 1546 | warnings. |
---|
[07beaa4] | 1547 | |
---|
[e34bebc] | 1548 | + Adjust width of node stats table to fit longest count when there are more |
---|
| 1549 | than 9999 of a particular order of node. |
---|
[07beaa4] | 1550 | |
---|
[e34bebc] | 1551 | + If the argument to *include has an opening double quote but the closing |
---|
| 1552 | double quote is missing, then skip trying to open the file. |
---|
[da9d788] | 1553 | |
---|
[e34bebc] | 1554 | + Move "Station X referred to just once" warning after non-existent survey |
---|
| 1555 | check - if both fire, the non-existent survey error is likely to be more |
---|
| 1556 | relevant. |
---|
[da9d788] | 1557 | |
---|
[e34bebc] | 1558 | + We no longer follow an error for a bad reading in passage data with a bogus |
---|
| 1559 | "End of line not blank" error, but instead check the remaining readings on |
---|
| 1560 | the same line. |
---|
[da9d788] | 1561 | |
---|
[e34bebc] | 1562 | + We no longer follow an error about OMIT for a required reading with a bogus |
---|
| 1563 | "End of line not blank" error. |
---|
[7f6250a] | 1564 | |
---|
[e34bebc] | 1565 | + Report an error if the scale factor in *calibrate is zero - it doesn't make |
---|
| 1566 | sense and probably means someone reversed the arguments to *calibrate. |
---|
[3dfffa2] | 1567 | |
---|
[e34bebc] | 1568 | + Report the parent include files starting from the outermost, as that's more |
---|
| 1569 | logical when there are multiple levels involved. |
---|
[07beaa4] | 1570 | |
---|
[e34bebc] | 1571 | + If we were expecting a numeric field and instead get something which starts |
---|
| 1572 | with '+', '-', or '.' but which isn't a number, then fix the error to |
---|
| 1573 | include that character in the token reported. |
---|
[3dfffa2] | 1574 | |
---|
[e34bebc] | 1575 | + Simplify handling of quantity lists to only recognise 'DEFAULT' as the |
---|
| 1576 | first item. |
---|
[07beaa4] | 1577 | |
---|
[e34bebc] | 1578 | * cad3d: Check for errors from img_rewind() and report them. |
---|
[07beaa4] | 1579 | |
---|
[e34bebc] | 1580 | * dump3d: |
---|
[07beaa4] | 1581 | |
---|
[e34bebc] | 1582 | + Build, install and package dump3d as standard - it's useful for grabbing |
---|
| 1583 | info from 3d files in scripts. |
---|
[07beaa4] | 1584 | |
---|
[e34bebc] | 1585 | + Add --show-dates option. |
---|
[07beaa4] | 1586 | |
---|
[e34bebc] | 1587 | + Show only 2 decimal places on coordinates and passage dimensions. |
---|
[07beaa4] | 1588 | |
---|
[e34bebc] | 1589 | + Report the data style of legs. |
---|
[da9d788] | 1590 | |
---|
[e34bebc] | 1591 | + Report if the file is an extended elevation. |
---|
| 1592 | |
---|
| 1593 | + Report img_STOP as STOP rather than CODE_0xffffffff. |
---|
[3dfffa2] | 1594 | |
---|
| 1595 | * Test suite: |
---|
| 1596 | |
---|
| 1597 | + cavern.tst: Fix equatenosuchstn testcase (added in 1.2.6) to normalise the |
---|
| 1598 | expected output so it passes reliably. |
---|
| 1599 | |
---|
[e34bebc] | 1600 | + cavern.tst: Run diffpos <expected> <actual> so the reports of 'Added' and |
---|
| 1601 | 'Deleted' stations upon failure are the more natural way round. |
---|
| 1602 | |
---|
[07beaa4] | 1603 | + Add more testcases, expand some existing testcases, and add expected output |
---|
| 1604 | for more. |
---|
| 1605 | |
---|
[e34bebc] | 1606 | * (Microsoft Windows version): Use wx-config's --cc and --cxx flags to find the |
---|
| 1607 | appropriate C and C++ compilers to use, and link mingw build statically to |
---|
| 1608 | avoid needing the libgcc DLL (which newer GCC seems to have by default). |
---|
[3dfffa2] | 1609 | |
---|
| 1610 | * (Unix version): When determining the character set for command-line tools, |
---|
| 1611 | check environmental variable LANG after LC_ALL and LC_CTYPE. |
---|
| 1612 | |
---|
| 1613 | * When determining the language, check environmental variable LC_ALL before |
---|
| 1614 | LC_MESSAGES and LANG (but after SURVEXLANG). |
---|
| 1615 | |
---|
[e34bebc] | 1616 | * If we don't find the message file, only give an error if it was specified |
---|
[665183c] | 1617 | with SURVEXLANG, since that is an explicit instruction to Survex, whereas |
---|
[e34bebc] | 1618 | LANG, LC_ALL and LC_MESSAGES are essentially system "preferred locale" |
---|
| 1619 | settings. |
---|
| 1620 | |
---|
| 1621 | * There are a handful of hard-coded English message strings for reporting |
---|
| 1622 | errors trying loading message files, etc. These are all now ASCII, as if we |
---|
| 1623 | fail trying to open a message file, it's more likely the encoding isn't |
---|
| 1624 | set correctly. |
---|
| 1625 | |
---|
| 1626 | * Prune strings we are no longer using and are probably unlikely to use again |
---|
| 1627 | into a new file po_codes_dead, so that translators don't get presented with |
---|
| 1628 | them to translate. |
---|
| 1629 | |
---|
[07beaa4] | 1630 | * Merge lots of translation updates. Most translations are now complete or |
---|
| 1631 | close to complete. |
---|
[3dfffa2] | 1632 | |
---|
| 1633 | * Add start of Indonesian translation from Arief Setiadi Wibowo. |
---|
| 1634 | |
---|
[07beaa4] | 1635 | * Fix various compiler warnings when building from source. |
---|
| 1636 | |
---|
[e34bebc] | 1637 | * Include scripts gdtconvert and gen_img2aven in the source distribution. |
---|
| 1638 | |
---|
[c575465] | 1639 | Changes in 1.2.6 (2012-02-23): |
---|
[b081031] | 1640 | |
---|
| 1641 | * (Mac OS X version): Fix so that cavern finds its messages when run by aven. |
---|
| 1642 | |
---|
| 1643 | * (Microsoft Windows version): Include JPEG images for aven in the installer |
---|
| 1644 | package (ticket#35). |
---|
| 1645 | |
---|
| 1646 | * cavern: If we have a reference to a station in a non-existent survey, give a |
---|
| 1647 | helpful error rather than saying the station hasn't been exported from the |
---|
| 1648 | survey. (Bug reported by Martin Green via email) |
---|
| 1649 | |
---|
| 1650 | * aven: Fix to build with a non-Unicode wxWidgets library. Patch from Olaf |
---|
| 1651 | Kahler. |
---|
| 1652 | |
---|
| 1653 | * findentrances: Add findentrances utility from Olaf Kahler which produces a |
---|
[c575465] | 1654 | .gpx file with waypoints for entrances. This needs libproj so is disabled |
---|
| 1655 | by default for this release - to enable it install the development stuff for |
---|
| 1656 | libproj and build survex with: |
---|
| 1657 | |
---|
| 1658 | make FINDENTRANCES=findentrances |
---|
| 1659 | make install FINDENTRANCES=findentrances |
---|
[b081031] | 1660 | |
---|
| 1661 | * dump3d: Add support for showing img_ERROR_INFO items. |
---|
| 1662 | |
---|
| 1663 | * doc/3dformat.htm: Merge in some improvements from Mike McCombe. |
---|
| 1664 | |
---|
| 1665 | * Incorporate a French translation from launchpad I'd previously copied the |
---|
| 1666 | English version of by mistake. Attempt to correct mistranslation of "survey |
---|
| 1667 | file". |
---|
| 1668 | |
---|
[685116f] | 1669 | Changes in 1.2.5 (2012-01-03): |
---|
| 1670 | |
---|
| 1671 | * aven: |
---|
| 1672 | |
---|
| 1673 | + The survey tree in the left panel is now in sorted order once more. |
---|
| 1674 | |
---|
| 1675 | + No longer fails with an assertion if used for a long time (we were leaking |
---|
| 1676 | an OpenGL list each time one had to be regenerated). |
---|
| 1677 | |
---|
| 1678 | + Now builds with newer FFmpeg library. |
---|
| 1679 | |
---|
| 1680 | + Draw measuring line in front of the indicators rather than behind them. |
---|
| 1681 | |
---|
| 1682 | + Loading a new file (or reloading the current one) no longer invalidates |
---|
| 1683 | the OpenGL lists for the compass and clino, so will be a fraction faster. |
---|
| 1684 | |
---|
| 1685 | * Improve handling of attempts to look up translated messages before the |
---|
| 1686 | message subsystem is fully initialised (which only happens if there's an |
---|
| 1687 | error early on). |
---|
| 1688 | |
---|
| 1689 | * Improve the survex(7) man page text, and fix it to be marked as section 7 in |
---|
| 1690 | the man page source as well as in the filename. |
---|
| 1691 | |
---|
[f15ca67f] | 1692 | Changes in 1.2.4 (2012-01-01): |
---|
| 1693 | |
---|
| 1694 | * aven: |
---|
| 1695 | |
---|
| 1696 | + A change in 1.2.3 meant that aven tried to use OpenGL before it was |
---|
| 1697 | initialised, which doesn't cause problems in some machines, but causes aven |
---|
| 1698 | to abort on others. This is now fixed, and there's a check in place to |
---|
| 1699 | help avoid similar issues in future. (ticket#34) |
---|
| 1700 | |
---|
| 1701 | + Always use metres or feet for the depth colour key, and chose a consistent |
---|
| 1702 | precision by looking at the depth range. (ticket#30) |
---|
| 1703 | |
---|
| 1704 | + Show the depth units below the colour bar rather than after every value. |
---|
| 1705 | |
---|
| 1706 | + When zooming way in, stay in metres rather than switching to cm. |
---|
| 1707 | |
---|
| 1708 | + On the scale bar, say “1 mile” rather than “1 miles”. |
---|
| 1709 | |
---|
| 1710 | * Translation updates for Catalan, French and Slovak. |
---|
| 1711 | |
---|
[5b9942e] | 1712 | Changes in 1.2.3 (2011-12-31): |
---|
| 1713 | |
---|
| 1714 | * Fix to build with wxWidgets 2.9.2. |
---|
| 1715 | |
---|
| 1716 | * (Mac OS X version): |
---|
| 1717 | |
---|
| 1718 | + Processing .svx files from aven now works. |
---|
| 1719 | |
---|
| 1720 | + Remove spurious blank lines from the licence text in "Get Info". |
---|
| 1721 | |
---|
| 1722 | + Don't create the help menu at all, as it is empty (because the "About" |
---|
| 1723 | entry goes elsewhere) and sometimes seems to appear in the UI. |
---|
| 1724 | |
---|
| 1725 | + INSTALL.OSX: Update to reflect current status. |
---|
| 1726 | |
---|
| 1727 | * aven: |
---|
| 1728 | |
---|
| 1729 | + Fix Y coordinates of surface surveys on printouts. (Closes #32) |
---|
| 1730 | |
---|
| 1731 | + Improvements to text plotted on the survey pane: |
---|
| 1732 | |
---|
| 1733 | - Support plotting Unicode character points > 256 by lazily loading the |
---|
| 1734 | data for them from the font file and plotting them with a direct call to |
---|
| 1735 | glBitmap(), which is slower but doesn't require a display list per |
---|
| 1736 | character. |
---|
| 1737 | |
---|
| 1738 | - Adjust the spacing from fixed width to putting a one pixel gap either |
---|
| 1739 | side of each one character (so two between adjacent glyphs). Mostly this |
---|
| 1740 | reduces the horizontal width, but it adds a pixel for characters like "m" |
---|
| 1741 | and two in a few cases. |
---|
| 1742 | |
---|
| 1743 | - Fix .pixelfont file generation to correctly handle characters wider than |
---|
| 1744 | 8 pixels. |
---|
| 1745 | |
---|
| 1746 | + Fix expected cross shape so don't always reject using texture mapping to |
---|
| 1747 | draw crosses. |
---|
| 1748 | |
---|
[3ea0178] | 1749 | + As we read a survey file, eliminate tubes consisting of zero XSECTs as well |
---|
| 1750 | as those consisting of just one. Previously we would trip over the empty |
---|
| 1751 | tube later. Such tubes can for example be created by extend if a splay shot |
---|
| 1752 | is the start or end of a tube. |
---|
| 1753 | |
---|
[5b9942e] | 1754 | + Make the green colour used for entrances in the survey tree the same |
---|
| 1755 | (slightly darker than before) green used for the entrance blobs. |
---|
| 1756 | |
---|
| 1757 | + Report the version of the library we're actually running with if built |
---|
| 1758 | against wx >= 2.9.2. Make it clear that the version reported is the |
---|
| 1759 | version *built* with for wx < 2.9.2. |
---|
| 1760 | |
---|
[3ea0178] | 1761 | * extend: |
---|
| 1762 | |
---|
| 1763 | + Copy the end markers for passage tubes. |
---|
[5b9942e] | 1764 | |
---|
[3ea0178] | 1765 | + Preserve left and right data for tubes (previously they were set to -1.0 |
---|
| 1766 | which means "no info"). |
---|
| 1767 | |
---|
| 1768 | * img library: Fix incorrect comment in img.h which claimed that img_XFLAG_END |
---|
| 1769 | was no longer used - it certainly is! |
---|
| 1770 | |
---|
| 1771 | * Use curly double quotes instead of "`" and "'" to quote filenames, etc in |
---|
| 1772 | messages, and curly single right quote instead of straight ASCII apostrophe. |
---|
| 1773 | Fall back to using straight ASCII versions if we can't represent them in the |
---|
| 1774 | current character set. |
---|
[5b9942e] | 1775 | |
---|
[3ea0178] | 1776 | * Translation updates for Catalan, French, Slovak and Spanish. |
---|
[5b9942e] | 1777 | |
---|
| 1778 | * Test suite: |
---|
| 1779 | |
---|
| 1780 | + Add test coverage for interleaved diving data. |
---|
| 1781 | |
---|
| 1782 | + Add testcase for diving data with topofil-style distance. |
---|
| 1783 | |
---|
[94960ad] | 1784 | Changes in 1.2.2 (2011-10-06): |
---|
| 1785 | |
---|
| 1786 | * aven: |
---|
| 1787 | |
---|
| 1788 | + Replace the textured-mapped font drawing with an approach based on |
---|
| 1789 | glBitmap. This doesn't suffer from the character alignment issues which |
---|
| 1790 | the textured-mapped fonts had, and is actually significantly faster on some |
---|
| 1791 | machines. The current font used is (mostly) fixed-width, but this isn't an |
---|
| 1792 | inherent limitation - it was just the easiest font data to convert to a |
---|
| 1793 | usable format. |
---|
| 1794 | |
---|
| 1795 | + Fix assertion failure due to rounding differences on loading certain .3d |
---|
| 1796 | files. (ticket#26) |
---|
| 1797 | |
---|
| 1798 | + Fix assertion failure when turning on 3D passages if they stick out higher |
---|
| 1799 | or lower than any station. (ticket#29) |
---|
| 1800 | |
---|
[53f8a93] | 1801 | + Fix grid not to disappear when blobs are turned on and blobs are drawn |
---|
| 1802 | using lines. |
---|
| 1803 | |
---|
[94960ad] | 1804 | + If a degree sign isn't available in the character set in use, transliterate |
---|
| 1805 | it to 'dg' rather than skipping it. |
---|
| 1806 | |
---|
| 1807 | + Fix message which should have been a degree sign but got lost in the format |
---|
| 1808 | change for 1.2.0 and then got reassigned in 1.2.1. Externally, this means |
---|
| 1809 | that bearings in the status bar now have a degree sign after them if they |
---|
| 1810 | are in degrees rather than nothing (1.2.0) or "&Hide Compass" (1.2.1). |
---|
| 1811 | |
---|
| 1812 | + Fix print dialog to calculate the scale required for "One page" right |
---|
| 1813 | before it calculates how many pages are required, so we don't end up |
---|
| 1814 | something other than 1x1 being shown when the user changes settings. |
---|
| 1815 | |
---|
| 1816 | + Update the calculations for picking a scale and for deciding how many |
---|
| 1817 | pages are needed to take into account the change in info box height made |
---|
| 1818 | in 1.2.1. |
---|
| 1819 | |
---|
[9704252] | 1820 | Changes in 1.2.1 (2011-10-04): |
---|
[e3c58c3] | 1821 | |
---|
| 1822 | * Translation updates for US English. |
---|
| 1823 | |
---|
| 1824 | * aven: |
---|
| 1825 | |
---|
| 1826 | + Rename the "depth bar" to "colour key" in documentation, menus, etc since |
---|
| 1827 | it now shows colours for dates and errors as well as depths. |
---|
| 1828 | |
---|
| 1829 | + In the colour key for "colour by date", change "No info" to "Undated". |
---|
| 1830 | |
---|
| 1831 | + Remove the dark grey background from the colour key and just put a single |
---|
| 1832 | pixel black border around the colours. This is more in keeping with the |
---|
| 1833 | other controls, and means the colours are now on a black background so more |
---|
| 1834 | visually similar to the survey legs. |
---|
| 1835 | |
---|
| 1836 | + Move the colour key's "Undated"/"Not in loop" entry down a little to |
---|
| 1837 | improve the appearance. Make each section a pixel taller. |
---|
| 1838 | |
---|
[9704252] | 1839 | + Allow "Colour by X" to be selected even if there's no data for X or only a |
---|
| 1840 | single value of X used (the colour key is much smaller in these cases, and |
---|
| 1841 | does still provide some useful information). |
---|
| 1842 | |
---|
| 1843 | + Fix incorrect calculation of depth colouring for survey legs which straddle |
---|
| 1844 | a depth band boundary. |
---|
[e3c58c3] | 1845 | |
---|
| 1846 | + The scale bar, compass, clino, and colour key now all have right click |
---|
[9704252] | 1847 | menus which allow related actions to be performed (especially handy in |
---|
| 1848 | full-screen mode). |
---|
[e3c58c3] | 1849 | |
---|
| 1850 | + Improve the font used on the survey pane - it now contains the '-' |
---|
| 1851 | character (so the clino now shows negative angles as negative, and dates |
---|
| 1852 | in the colour key are now hyphenated). Also the spacing and alignment |
---|
| 1853 | are a little better, though still not perfect. |
---|
| 1854 | |
---|
| 1855 | + PLT file export now handles spaces and control characters in station names |
---|
| 1856 | by escaping them with '%' as in URLs. |
---|
| 1857 | |
---|
| 1858 | + Pressing "Enter" on a station in the tree control now centres the view on |
---|
| 1859 | that station. |
---|
| 1860 | |
---|
| 1861 | + The scale bar is now cached in an OpenGL display list since it often gets |
---|
| 1862 | redrawn exactly the same - for example, when rotating, panning, etc. |
---|
| 1863 | |
---|
| 1864 | + Pressing "F5" forces all cached OpenGL drawing lists to be invalidated and |
---|
| 1865 | then forces a refresh of the survey pane. This is intended as a debugging |
---|
| 1866 | aid - if pressing F5 changes the display at all then there's a missing case |
---|
[9704252] | 1867 | where a list should have been invalidated (please report if you find such |
---|
| 1868 | a case as it is a bug). |
---|
[e3c58c3] | 1869 | |
---|
[9704252] | 1870 | + We now automatically track which OpenGL display lists need to be |
---|
| 1871 | invalidated on window width or height changes. |
---|
[e3c58c3] | 1872 | |
---|
| 1873 | + Increase scale bar maximum width from 65% of the window width to 75% as it |
---|
| 1874 | was in 1.0.x (except that if that would overlap the clino we now reduce |
---|
| 1875 | that proportion down until it reaches 50%). Make the limit of zooming in |
---|
| 1876 | the same as in 1.0.x. (ticket#23) |
---|
| 1877 | |
---|
[9704252] | 1878 | + (Linux version): Previously wxGTK didn't really handle showing a dialog if |
---|
| 1879 | the application was fullscreen (the dialog got opened under the main |
---|
| 1880 | window!) To work around this, aven would switch out of full screen mode |
---|
| 1881 | temporarily while showing a dialog. This case works properly with recent |
---|
| 1882 | wxGTK, so disable our workaround with versions we know work. Also, apply |
---|
| 1883 | the workaround only for wxGTK, not everywhere except on Microsoft Windows |
---|
| 1884 | as there's no reason to think we need it for other platforms. |
---|
[e3c58c3] | 1885 | |
---|
| 1886 | + Grey out the "View North" action when we're already viewing North, and |
---|
| 1887 | similarly for other compass points. |
---|
| 1888 | |
---|
| 1889 | + (Mac OS X and Microsoft Windows versions): Fix missing newline to OpenGL |
---|
| 1890 | info in the "About" dialog. |
---|
| 1891 | |
---|
| 1892 | + Fix to set the correct filename on the root of the survey tree - previously |
---|
| 1893 | the filename of the previous file loaded was used! |
---|
| 1894 | |
---|
| 1895 | + The movie export code now works with newer versions of the FFmpeg libraries |
---|
| 1896 | as well as still working with older versions. |
---|
| 1897 | |
---|
| 1898 | + Fix mixed up messages - the print dialog now says "View" on the left |
---|
| 1899 | subgroup of controls rather than some unrelated message. |
---|
| 1900 | |
---|
| 1901 | + On printouts, combine the "Plan View"/"Elevation" info box field with the |
---|
| 1902 | field which gives the bearing and reduce the height on the info box by the |
---|
| 1903 | removed field, so it's now 3cm for plans and elevations, as for extended |
---|
| 1904 | elevations. Report the tilt angle for tilted elevations which it seems has |
---|
| 1905 | been missing for ages (it's not in recent 1.0.x either). |
---|
| 1906 | |
---|
| 1907 | + Tweak the exact positioning of informational text on printouts to look |
---|
| 1908 | nicer and make better use of the available space. |
---|
| 1909 | |
---|
| 1910 | + Add keyboard mnemonics to the "Plan" and "Elevation" buttons in the print |
---|
| 1911 | dialog. |
---|
| 1912 | |
---|
| 1913 | + Make the sign of the tilt angle for printouts consistent with the sign |
---|
| 1914 | shown by the "clino" in the survey pane. |
---|
| 1915 | |
---|
| 1916 | + In the "Print" dialog, when in plan view disable the "Plan view" button, |
---|
| 1917 | and similarly for the "Elevation" button. |
---|
| 1918 | |
---|
[9704252] | 1919 | + (Microsoft Windows version): Sort out appearance of custom cursors. |
---|
| 1920 | |
---|
[e3c58c3] | 1921 | + If a label isn't valid UTF-8 or CP1252, fall back to ISO8859-1. |
---|
| 1922 | |
---|
| 1923 | + (Mac OS X version): F11 puts aven into full screen mode, but apparently |
---|
| 1924 | you can't get out again easily, so add code to explicitly check for F11 |
---|
| 1925 | being pressed and toggle full screen. |
---|
| 1926 | |
---|
| 1927 | * (Linux version): Fix the RPM .spec file for where man pages now get installed |
---|
| 1928 | and package aven.svg and the vim support files. (Fixes from James Begley) |
---|
| 1929 | |
---|
| 1930 | * "make check" now performs several checks on the translation files. |
---|
| 1931 | |
---|
| 1932 | * More messages are now available to be translated. |
---|
| 1933 | |
---|
| 1934 | * cavern: Fix reporting of ranges of survey coordinates, which was broken by |
---|
| 1935 | the message handling changes in 1.2.0. |
---|
| 1936 | |
---|
| 1937 | * Fix warning when compiling with GCC. |
---|
| 1938 | |
---|
| 1939 | * INSTALL: Mention building wxWidgets with --enable-unicode. Mention using |
---|
| 1940 | sudo for installing on Unix. |
---|
| 1941 | |
---|
| 1942 | * In the manual, replace the instructions for building from source with a |
---|
| 1943 | pointer to the clearer instructions in INSTALL. |
---|
| 1944 | |
---|
| 1945 | * In the manual, make it clear that installing with administrator rights |
---|
| 1946 | also applies to newer platforms than XP. |
---|
| 1947 | |
---|
| 1948 | * doc/TODO.htm: Update. |
---|
| 1949 | |
---|
[120c1c6] | 1950 | Changes in 1.2.0 (2011-09-20): |
---|
[b4ac7007] | 1951 | |
---|
| 1952 | * Translation updates for Catalan, French, Romanian, Spanish, Slovak, and US |
---|
| 1953 | English. |
---|
| 1954 | |
---|
[9cfcb3f] | 1955 | * tests/smoke.tst: aven no longer requires an X display for --help or |
---|
| 1956 | --version, so replace skip of this check with a check that this remains the |
---|
| 1957 | case. |
---|
| 1958 | |
---|
| 1959 | * We now use the standard .po and .pot file formats for storing translations |
---|
| 1960 | (rather than the Survex-specific messages.txt format), and then translate |
---|
| 1961 | these into Survex's .msg format. |
---|
| 1962 | |
---|
[b4ac7007] | 1963 | * (Unix version): Move survex man page to section 7 (since it isn't documenting |
---|
| 1964 | an actual command). |
---|
| 1965 | |
---|
[9cfcb3f] | 1966 | * (Unix version): Write each generated man page to a temporary file, then |
---|
| 1967 | atomically rename, to avoid leaving an empty or partial man page behind if |
---|
| 1968 | docbook-to-man dies (1.1.16 had an empty cad3d.1, and we want to avoid a |
---|
| 1969 | recurrence of that). |
---|
| 1970 | |
---|
[b4ac7007] | 1971 | * (Unix version): Default to installing docs into /usr/share/doc/survex rather |
---|
| 1972 | than /usr/doc/survex. |
---|
| 1973 | |
---|
| 1974 | * aven: |
---|
| 1975 | |
---|
[120c1c6] | 1976 | + Fix handling of accented characters in the survey pane. |
---|
| 1977 | |
---|
[9cfcb3f] | 1978 | + Aven icon redrawn in SVG format - it's now a vector image which looks |
---|
| 1979 | nicer at larger sizes. |
---|
| 1980 | |
---|
[b4ac7007] | 1981 | + Explicitly request double-buffering, which seems to be needed for systems |
---|
| 1982 | with GLX >= 1.3. |
---|
| 1983 | |
---|
| 1984 | + Fix crash while trying to load certain .3d files. |
---|
| 1985 | |
---|
| 1986 | + Movie export code updated to work with more recent versions of FFmpeg. |
---|
[4095cc0] | 1987 | Currently this is disabled in Microsoft Windows builds, pending getting the |
---|
| 1988 | required libraries set up for building releases. |
---|
[b4ac7007] | 1989 | |
---|
| 1990 | + Reporting of errors during movie export improved. |
---|
| 1991 | |
---|
| 1992 | + Force playback speed to "x1" during movie export. |
---|
| 1993 | |
---|
| 1994 | + Use stock IDs for buttons where appropriate - such buttons may now be |
---|
| 1995 | rendered with icons on some platforms. |
---|
| 1996 | |
---|
[9cfcb3f] | 1997 | + If a label isn't valid UTF-8, treat it as CP1252 (the Microsoft superset of |
---|
| 1998 | ISO8859-1). |
---|
| 1999 | |
---|
| 2000 | + (Unix version): Remove special handling for toggling "full screen" on wxGTK |
---|
| 2001 | as it's no longer required with modern versions. |
---|
| 2002 | |
---|
| 2003 | + Don't redraw the survey on every mouse movement in the survey pane unless |
---|
| 2004 | the measuring line is (or just was) active. (ticket #17) |
---|
| 2005 | |
---|
[b4ac7007] | 2006 | * cavern: |
---|
| 2007 | |
---|
| 2008 | + Drop "non-fatal" from the report of how many errors there were at the end |
---|
| 2009 | of the run - it just confuses users - we won't even get here if there's a |
---|
| 2010 | fatal error! |
---|
| 2011 | |
---|
[9cfcb3f] | 2012 | + Add --3d-version option to allow the user to specify the version of the 3d |
---|
| 2013 | format to output. (ticket#21) |
---|
| 2014 | |
---|
| 2015 | * img library: |
---|
| 2016 | |
---|
| 2017 | + Make the highest and lowest valid values for img_output_version available |
---|
| 2018 | in img.h as IMG_VERSION_MIN and IMG_VERSION_MAX. |
---|
| 2019 | |
---|
[b4ac7007] | 2020 | * (Mac OS X version): Fix buildmacosx.sh script to check where the temporary |
---|
[120c1c6] | 2021 | volume actually gets mounted. Fix URL for downloading wxWidgets. |
---|
[b4ac7007] | 2022 | |
---|
[8f9b0b6d] | 2023 | Changes in 1.1.16 (2011-05-16): |
---|
[ecdb631] | 2024 | |
---|
| 2025 | * Translation updates for German, Spanish, Italian, Portuguese, Brazilian |
---|
| 2026 | Portuguese, and US English. |
---|
| 2027 | |
---|
| 2028 | * Use horizontal ellipses character rather than '...' and right arrow character |
---|
[ec8fd0d] | 2029 | rather than '->' where these characters are available. |
---|
[ecdb631] | 2030 | |
---|
| 2031 | * (Unix version): Link with -lGL, if it exists, to support linking with gold or |
---|
| 2032 | GNU ld --as-needed (Debian bug #615781). |
---|
| 2033 | |
---|
| 2034 | * img.c: |
---|
| 2035 | |
---|
| 2036 | + Fix code typo for IMG_API_VERSION == 0 case. |
---|
| 2037 | |
---|
| 2038 | + Fix code typo in code used when IMG_HOSTED isn't defined. |
---|
| 2039 | |
---|
| 2040 | * doc/TODO.htm: Remove entries which have now been done. |
---|
| 2041 | |
---|
[8f9b0b6d] | 2042 | * (Microsoft Windows version): aven: We now include all the available |
---|
| 2043 | translations for messages from wxWidgets, which means that standard widgets |
---|
| 2044 | will appear translated where available even if Survex messages aren't |
---|
| 2045 | translated. |
---|
| 2046 | |
---|
[f5e3521] | 2047 | Changes in 1.1.15 (2010-10-15): |
---|
[2d16e4e] | 2048 | |
---|
| 2049 | * aven: |
---|
| 2050 | |
---|
| 2051 | + In the cavern log window, change the "Rerun" button to "Reprocess" to |
---|
| 2052 | follow terminology in manual and elsewhere. Fixes ticket#15. |
---|
| 2053 | |
---|
| 2054 | + When displaying output from cavern, don't update the window after every |
---|
| 2055 | line, but only when we don't have data from cavern pending. Hopefully |
---|
| 2056 | addresses ticket#12. |
---|
| 2057 | |
---|
| 2058 | + If we aren't using GL_POINTS for blobs, draw them using a series of |
---|
| 2059 | abutting lines rather than with gluDisk which is faster and gives a |
---|
| 2060 | consistent shape. |
---|
| 2061 | |
---|
| 2062 | + Check whether blobs and crosses actually render correctly as points/point |
---|
| 2063 | sprites, and if they don't, fall back to drawing them with lines. The |
---|
| 2064 | best method is cached on disk, and rechecked automatically if the graphics |
---|
| 2065 | hardware is changed or the drivers upgraded. |
---|
| 2066 | |
---|
| 2067 | + Fix non-USE_FNT case to work again (it's limited to ISO-8859-1 characters |
---|
| 2068 | though, so we still enable USE_FNT by default). |
---|
| 2069 | |
---|
| 2070 | + Don't offer "All files" wildcard in presentation save dialog. |
---|
| 2071 | |
---|
| 2072 | + (Microsoft Windows): Handle filenames with non-Latin1 characters in in |
---|
| 2073 | more places. |
---|
| 2074 | |
---|
| 2075 | + (Microsoft Windows): Quote filenames with spaces and metacharacters in |
---|
[f5e3521] | 2076 | when running cavern from aven. Fixes ticket#11. |
---|
| 2077 | |
---|
| 2078 | * editwrap: (Microsoft Windows): Handle filenames with non-Latin1 characters. |
---|
| 2079 | |
---|
| 2080 | * diffpos: Handle files with duplicate labels in better - extend generates |
---|
| 2081 | duplicate labels when it breaks a loop. |
---|
| 2082 | |
---|
| 2083 | * Enable eswap-break testcase now that diffpos handles duplicate station names. |
---|
[2d16e4e] | 2084 | |
---|
| 2085 | * New v7 of .3d format which stores survey dates as number of days since |
---|
| 2086 | January 1st 1900, so we now support dates from 1900-2078 (rather than |
---|
| 2087 | 1970-2037) with a smaller file size. The img API is now versioned - you |
---|
| 2088 | can select the new "version 1" by compiling with -DIMG_API_VERSION=1, which |
---|
| 2089 | gives the survey dates in days in days1 and days2 instead of as time_t |
---|
| 2090 | values in date1 and date2. Fixes ticket#14. |
---|
| 2091 | |
---|
| 2092 | * Consistently use http://survex.com/ rather than http://www.survex.com/ - the |
---|
| 2093 | former has been the canonical name for some time, with www.survex.com just |
---|
| 2094 | redirecting to it. |
---|
| 2095 | |
---|
| 2096 | * (Unix version): Use unlocked file I/O if available, which can be much faster |
---|
| 2097 | in some cases (we don't need the locking as we don't do multithreaded file |
---|
| 2098 | I/O). |
---|
| 2099 | |
---|
| 2100 | * (Mac version): Fix compilation failure due to clash with Point in Mac OS X |
---|
| 2101 | headers. |
---|
| 2102 | |
---|
| 2103 | * (Mac version): buildmacosx.sh now works again. |
---|
| 2104 | |
---|
| 2105 | * Most tests weren't actually running any testcases (looks like a sh |
---|
| 2106 | portability issue). This is now fixed, and fortunately all tests still pass. |
---|
| 2107 | |
---|
| 2108 | * Include the extra .isl translation files for Innosetup in the source archive. |
---|
| 2109 | |
---|
[f9473ab] | 2110 | Changes in 1.1.14 (2010-07-26): |
---|
| 2111 | |
---|
| 2112 | * Restore compatibility with wxWidgets 2.6 (1.1.13 required wxWidgets 2.8). |
---|
| 2113 | |
---|
| 2114 | * aven: |
---|
| 2115 | |
---|
| 2116 | + After processing survey data, if there were warnings or errors, add a |
---|
| 2117 | "Rerun" button to allow easy reprocessing after fixing problems. If there |
---|
| 2118 | were only warnings, also add an "OK" button to allow moving on to viewing |
---|
| 2119 | the processed survey data (fixes ticket#13). |
---|
| 2120 | |
---|
| 2121 | + Optimise updating of the cavern log window (hopefully fixes ticket#12). |
---|
| 2122 | |
---|
| 2123 | + Fix links in cavern log window to link from exactly '<file>:<line>' (and |
---|
| 2124 | not the ': ' after), and to make the title for the terminal the |
---|
| 2125 | warning/error message. Avoid false positives by checking that '<line>' is |
---|
| 2126 | a number. |
---|
| 2127 | |
---|
| 2128 | + Don't double escape the contents of href and target in links in the cavern |
---|
| 2129 | log window. |
---|
| 2130 | |
---|
| 2131 | + Improve handling of the splitter window, fixing behavioural glitches in |
---|
| 2132 | various cases. |
---|
| 2133 | |
---|
| 2134 | + Highlight stations matching any current search when a file is loaded. |
---|
| 2135 | (ticket#9) |
---|
| 2136 | |
---|
| 2137 | + (Mac version): Fix build issue due to Mac OS X polluting the global |
---|
| 2138 | namespace with its own "Point" class. |
---|
| 2139 | |
---|
| 2140 | + (Unix version): The Gnome print dialog has its own preview window so |
---|
| 2141 | suppress ours if using the Gnome one. |
---|
| 2142 | |
---|
| 2143 | + (Unix version): Link aven with -lGLU which SuSE Linux needs. |
---|
| 2144 | |
---|
| 2145 | + (Microsoft Windows version): Fix handling of a double-click on the survey |
---|
| 2146 | tree when built with wxWidgets >= 2.8.11. |
---|
| 2147 | |
---|
| 2148 | * cavern: Report relevant file and line number for three warnings which didn't |
---|
| 2149 | give them before. |
---|
| 2150 | |
---|
| 2151 | * (Unix and Mac versions): configure: Update the wx-config probing code - |
---|
| 2152 | wxmac-config etc aren't present with newer wxWidgets versions so there's no |
---|
| 2153 | point looking for them now. |
---|
| 2154 | |
---|
| 2155 | * (Mac version): buildmacosx.sh: This script builds a diskimage with Survex in |
---|
| 2156 | for easy installation. Update it to work with the latest Survex versions |
---|
| 2157 | (use WX_CONFIG not WXCONFIG; use a Unicode build of wxWidgets; if building a |
---|
| 2158 | private wxWidgets, use 2.8.11 not 2.7.0-1). |
---|
| 2159 | |
---|
| 2160 | * manual: |
---|
| 2161 | |
---|
| 2162 | + Correctly capitalise "GTK". |
---|
| 2163 | |
---|
| 2164 | + Note that on Linux we only regularly test builds with the GTK+ version |
---|
| 2165 | (change taken from 1.0). |
---|
| 2166 | |
---|
| 2167 | * Fixed the cad3d man page, which was an empty file in 1.1.13. |
---|
| 2168 | |
---|
[0bd49eb] | 2169 | Changes in 1.1.13 (2010-06-16): |
---|
[90d0d71] | 2170 | |
---|
| 2171 | * Say "wxWidgets" instead of "wxWindows" consistently. |
---|
| 2172 | |
---|
[739b92c] | 2173 | * img.c: Fix small memory leak (filename_opened member). |
---|
[90d0d71] | 2174 | |
---|
| 2175 | * cad3d, aven: Fix export to SVG when a label contains a '%' character. |
---|
[f1cbf74] | 2176 | |
---|
| 2177 | * aven: |
---|
| 2178 | |
---|
[90d0d71] | 2179 | + wxWidgets 2.6.0 or newer is now required. |
---|
| 2180 | |
---|
| 2181 | + A "Unicode" build of wxWidgets is now supported. An "ANSI" build may still |
---|
| 2182 | work but hasn't been tested recently (all packaged versions of wxWidgets |
---|
| 2183 | seem to be Unicode now). |
---|
| 2184 | |
---|
| 2185 | + Fix potential uses of uninitialised variables which may have been causing |
---|
| 2186 | occasional glitches when loading a file on start-up. |
---|
| 2187 | |
---|
[e4bfd2f] | 2188 | + Improvements to the handling of the font used for plotting labels and other |
---|
| 2189 | text on the survey pane: |
---|
| 2190 | |
---|
| 2191 | - Loading the font file is more efficient. |
---|
| 2192 | |
---|
| 2193 | - Character spacing is improved. |
---|
| 2194 | |
---|
| 2195 | - Default font is now anti-aliased. |
---|
[90d0d71] | 2196 | |
---|
| 2197 | + "About" dialog: |
---|
| 2198 | |
---|
| 2199 | - Add "Copy" button to copy the system info to the clipboard for easier |
---|
| 2200 | bug reporting. |
---|
| 2201 | |
---|
| 2202 | - List OpenGL extensions last, since there are usually lots of them with a |
---|
| 2203 | modern gfx card. |
---|
| 2204 | |
---|
| 2205 | - Fix 100% CPU usage while the "About" dialog is open. |
---|
| 2206 | |
---|
| 2207 | + Processing .svx files: |
---|
| 2208 | |
---|
| 2209 | - Passing a .svx file on the command line now works better. |
---|
[1324d6c] | 2210 | |
---|
[739b92c] | 2211 | - Put the survey data log window in a splitter in the usual frame rather |
---|
| 2212 | than opening a separate frame for it. |
---|
| 2213 | |
---|
[90d0d71] | 2214 | - Auto-scroll the log window until we've reported a warning or error. |
---|
| 2215 | |
---|
| 2216 | - Fix small memory leak. |
---|
| 2217 | |
---|
| 2218 | + The presentation filename now defaults to using the basename of the |
---|
| 2219 | currently loaded dataset, but we always prompt before we first save with |
---|
| 2220 | such a name. |
---|
| 2221 | |
---|
| 2222 | + Reduce memory usage when saving a screenshot. |
---|
| 2223 | |
---|
[e4bfd2f] | 2224 | + Allow "Toggle Fullscreen" to work even if no survey is loaded now that we |
---|
| 2225 | persist the window size (and maximised or fullscreen state) between |
---|
| 2226 | invocations. |
---|
| 2227 | |
---|
[90d0d71] | 2228 | + Fix reporting of OpenGL errors. |
---|
| 2229 | |
---|
| 2230 | + Fix glitches when tilting while looking East. |
---|
| 2231 | |
---|
[739b92c] | 2232 | + Added Portuguese and Slovak translations of wxWidgets messages. |
---|
| 2233 | |
---|
[90d0d71] | 2234 | * Documentation: |
---|
| 2235 | |
---|
[e4bfd2f] | 2236 | + Rationalise manual formats - replace PostScript with PDF and drop RTF. |
---|
| 2237 | |
---|
| 2238 | + Drop the "alternative manual formats" self-extracting zip file - people |
---|
| 2239 | will generally just want one of the formats, so downloading several |
---|
| 2240 | together isn't very useful. |
---|
| 2241 | |
---|
[90d0d71] | 2242 | + 3dformat.htm: Update for v6 format (thanks to Mike McCombe). |
---|
| 2243 | |
---|
| 2244 | + GPL.htm: Replace HTML version of licence with a link to the version on |
---|
| 2245 | the FSF website. |
---|
| 2246 | |
---|
| 2247 | + ChngeLog.htm: Stop generating an HTML version of the ChangeLog - it's too |
---|
| 2248 | low level to be of interest to non-developers, and developers can look at |
---|
| 2249 | the source code. |
---|
| 2250 | |
---|
| 2251 | * (Unix version): configure: New preferred name for specifying wx-config script |
---|
| 2252 | is WX_CONFIG. WXCONFIG still supported for compatibility. |
---|
[f1cbf74] | 2253 | |
---|
[e4bfd2f] | 2254 | * (Linux version): Source RPM package dropped as you can just build an RPM |
---|
| 2255 | package from the source tarball. |
---|
| 2256 | |
---|
[739b92c] | 2257 | * (Microsoft Windows version): The installer is now created with a newer |
---|
| 2258 | version of InnoSetup, which gives a 10% smaller download. |
---|
| 2259 | |
---|
[2e12f8c] | 2260 | Changes in 1.1.12 (2007-02-07): |
---|
[5940815] | 2261 | |
---|
| 2262 | * aven: |
---|
| 2263 | |
---|
[3db0798] | 2264 | + Remember the window size or maximised/fullscreen state between invocations. |
---|
| 2265 | |
---|
[5940815] | 2266 | + Add options dialog to "Export" similar to the one for "Print". |
---|
| 2267 | |
---|
[6b2113d] | 2268 | + The "number of pages required" in the print dialog now updates when you |
---|
| 2269 | change what is to be shown (underground legs/surface legs/station |
---|
| 2270 | names/crosses). |
---|
| 2271 | |
---|
[920b066] | 2272 | Changes in 1.1.11 (2006-11-25): |
---|
| 2273 | |
---|
| 2274 | * Updated Czech, Spanish, and Slovak translations. |
---|
| 2275 | |
---|
[99d8798] | 2276 | * (MacOS X version): Assorted OS X specific tweaks and fixes. |
---|
| 2277 | |
---|
[920b066] | 2278 | * aven: |
---|
[78c67a6] | 2279 | |
---|
[920b066] | 2280 | + Pick a smaller and clearer font for labels. |
---|
[99d8798] | 2281 | |
---|
[920b066] | 2282 | + Fix character spacing. |
---|
[99d8798] | 2283 | |
---|
[920b066] | 2284 | + Tweak display of bearing and elevation angles to look nicer with |
---|
| 2285 | proportional fonts. |
---|
[99d8798] | 2286 | |
---|
[920b066] | 2287 | + Use the title from the 3d (or plt, etc) file for the window title |
---|
| 2288 | rather than the filename. |
---|
[99d8798] | 2289 | |
---|
[920b066] | 2290 | + Show distances to 2 decimal places rather than the nearest integer. |
---|
[99d8798] | 2291 | |
---|
[920b066] | 2292 | + Only consider underground legs when calculating the depth bands and |
---|
| 2293 | depth colouring. |
---|
[99d8798] | 2294 | |
---|
[920b066] | 2295 | + Add "Colour by Error". |
---|
[99d8798] | 2296 | |
---|
[920b066] | 2297 | + Add entry for "white" in date and error keys. |
---|
[99d8798] | 2298 | |
---|
[920b066] | 2299 | + When setting the view to a single point, don't change the scale. |
---|
[99d8798] | 2300 | |
---|
[920b066] | 2301 | + If reloading the same file, don't change the view |
---|
[99d8798] | 2302 | |
---|
[920b066] | 2303 | + Fix filetypes selector in open dialog. |
---|
[99d8798] | 2304 | |
---|
[920b066] | 2305 | + Fix the charset we use for aven in certain cases. |
---|
[99d8798] | 2306 | |
---|
[920b066] | 2307 | + Call msg_init before using msg_lang or it won't ever be set! |
---|
[99d8798] | 2308 | |
---|
[920b066] | 2309 | + Pass wx the full language code to initialise the C library locale. |
---|
[99d8798] | 2310 | |
---|
[920b066] | 2311 | + Fix bug in generating prefix tree view which could lead to a bogus |
---|
| 2312 | leading dot on some survey names (bug probably introduced in 1.1.10). |
---|
[99d8798] | 2313 | |
---|
[920b066] | 2314 | + "New Presentation" now ensures that the side panel is open |
---|
[99d8798] | 2315 | |
---|
[920b066] | 2316 | + Fix updating of cached opengl lists when the view is reset to the |
---|
| 2317 | default. |
---|
[99d8798] | 2318 | |
---|
[920b066] | 2319 | * Ignore LANG if it starts with a digit to avoid problems with bogus value for |
---|
| 2320 | LANG which AutoCAD installation seems to set on MS Windows. |
---|
[99d8798] | 2321 | |
---|
[920b066] | 2322 | * (Unix version): configure: Allow SGMLTOOLS and DOCBOOK_TO_MAN to be |
---|
| 2323 | specified. Either/both can be set to ":". |
---|
[99d8798] | 2324 | |
---|
[920b066] | 2325 | * dump3d: Report unknown (to dump3d) codes returned by img. |
---|
[99d8798] | 2326 | |
---|
[920b066] | 2327 | * img library: Flag all stations as underground in the old "ASCII" .3d format. |
---|
[99d8798] | 2328 | |
---|
[920b066] | 2329 | Changes in 1.1.10 (2006-07-14): |
---|
[ac3f376] | 2330 | |
---|
| 2331 | * aven: Clicking on a survey name in the survey tree now highlights it in |
---|
| 2332 | the map view. Double-clicking zooms the view to show the clicked survey |
---|
| 2333 | highlighted. Clicking the root clears the highlighting and double-clicking |
---|
| 2334 | the root restores the default view. To expand/collapse a branch, click |
---|
| 2335 | on the "[+]" or "[-]" icon to the left of the survey name. |
---|
| 2336 | |
---|
| 2337 | * aven: The measuring line can now measure to anywhere in plan or elevation |
---|
| 2338 | view (not just to a station!) In plan view the horizontal distance and |
---|
| 2339 | bearing are shown, while in elevation view the vertical distance is shown. |
---|
[90d0d71] | 2340 | |
---|
[ac3f376] | 2341 | * aven: Moving the mouse over a station in the survey view now highlights |
---|
| 2342 | that station in the survey tree (though it may not be visible if the |
---|
| 2343 | survey(s) it is in aren't expanded). |
---|
| 2344 | |
---|
| 2345 | * aven: Clicking on a station to centre the view now moves the mouse pointer |
---|
| 2346 | to the new location of the station (except on Mac OS X where this isn't |
---|
| 2347 | allowed). |
---|
| 2348 | |
---|
| 2349 | * aven: Fix which presentation toolbar buttons are shown as depressed. |
---|
| 2350 | |
---|
| 2351 | * Fix infinite loop reading 3d files with LRUD data (bug introduced in 1.1.9). |
---|
| 2352 | |
---|
| 2353 | * vim files are now installed with the correct paths (bug introduced in 1.1.9). |
---|
| 2354 | |
---|
[920b066] | 2355 | Changes in 1.1.9 (2006-07-04): |
---|
[6a2594be] | 2356 | |
---|
| 2357 | * (Unix version): Install desktop files for aven and svxedit contributed to the |
---|
| 2358 | Ubuntu package by Phil Bull, and corresponding pixmaps. |
---|
| 2359 | |
---|
| 2360 | * Fix img to filter out cross-sections which don't match the subsurvey (if |
---|
| 2361 | specified). The API now returns img_XSECT_END to mark the end of a |
---|
| 2362 | passage rather than setting a flag on the last img_XSECT of the passage. |
---|
| 2363 | |
---|
| 2364 | * Enhance integration with the vim editor - this can now colour .err files, run |
---|
| 2365 | cavern from vim and parse error output, and run aven from vim. Tweak the |
---|
| 2366 | existing vim mode for .svx files to fix a few minor bugs and add support for |
---|
| 2367 | the new "*data passage" style. |
---|
| 2368 | |
---|
| 2369 | * aven: fix drawing of the "blob" end of the measuring line on graphics cards |
---|
| 2370 | which can't draw large enough blobs for us. |
---|
| 2371 | |
---|
| 2372 | * aven: sort out confusion about what encoding everything is in which means |
---|
| 2373 | that the distance measured by the measuring line actually gets displayed |
---|
| 2374 | and also fixes problems with empty menu items in non-English locales in |
---|
| 2375 | some cases. |
---|
| 2376 | |
---|
| 2377 | * aven: redraw grey background after a menu is closed over the aven window |
---|
| 2378 | with no survey loaded. |
---|
| 2379 | |
---|
| 2380 | * aven: fix bug which caused printing to crash (introduced in 1.1.8). |
---|
| 2381 | |
---|
| 2382 | * aven: avoid crash on some machines when opening "About" dialog before having |
---|
| 2383 | loaded a survey. |
---|
| 2384 | |
---|
| 2385 | * aven: Translate "Plan" and "Elevation" buttons in print view dialog. |
---|
| 2386 | |
---|
| 2387 | * (Unix version): aven: Fix character set handling of cavern output. |
---|
| 2388 | |
---|
| 2389 | * cavern: Report an error if a cross-section is specified for a station which |
---|
| 2390 | doesn't exist. |
---|
| 2391 | |
---|
| 2392 | * Updated French and Italian translations. |
---|
| 2393 | |
---|
| 2394 | * (Unix version): aven: Fix "Can't open message file `en_US' using path |
---|
[f3cfd13] | 2395 | `${prefix}/share/survex'" error. |
---|
| 2396 | |
---|
[6a2594be] | 2397 | * Fix bug in 3d file reading on 64 bit platforms when used in STANDALONE mode |
---|
| 2398 | (doesn't affect Survex itself, but other applications which use img.c should |
---|
| 2399 | update their copy). |
---|
| 2400 | |
---|
| 2401 | * (Unix version): Add checks that wxWidgets is a non-unicode version (wx 2.6 |
---|
| 2402 | and later are caught by configure, whereas older wx versions are caught when |
---|
| 2403 | trying to compile). |
---|
| 2404 | |
---|
[920b066] | 2405 | Changes in 1.1.8 (2006.06.30): |
---|
[cd39f67] | 2406 | |
---|
[c988ae4] | 2407 | * Drop support for building with wxWidgets versions prior to 2.4.0 |
---|
| 2408 | (which was released on 2003-01-07). |
---|
| 2409 | |
---|
[9577fcc] | 2410 | * aven: Printing through aven now uses settings from the "[aven]" section |
---|
| 2411 | of print.ini, and support for hierarchical sections (using "like=") |
---|
| 2412 | has been disabled. |
---|
| 2413 | |
---|
[ecf2d23] | 2414 | * aven: Change mouse actions to be compatible with those in Survex 1.0. |
---|
| 2415 | The mousewheel now zooms in/out (it doesn't do anything in 1.0) and |
---|
| 2416 | left drag is now smart about not rotating and zooming at the same |
---|
| 2417 | time. |
---|
| 2418 | |
---|
[d1628e8e] | 2419 | * aven: Highlighting stations now happens as you type, and pressing |
---|
| 2420 | "Enter" or clicking the "Find" button now pans and zooms to show the |
---|
| 2421 | highlighted stations. |
---|
| 2422 | |
---|
[e67ed1b] | 2423 | * aven: Left-clicking away from a station now cancels measuring line. |
---|
| 2424 | |
---|
[3ddd351] | 2425 | * aven: Setting view to North, South, East, or West is now animated like |
---|
| 2426 | the tilt from plan to elevation. |
---|
| 2427 | |
---|
[c988ae4] | 2428 | * aven: Fix presentation saving to also write "." for decimal points and |
---|
| 2429 | presentation loading to accept either "." or ",". |
---|
| 2430 | |
---|
| 2431 | * (Unix version): aven: Add text for all toolbar items so that aven |
---|
| 2432 | will work with the Gnome desktop preference for displaying toolbars as |
---|
| 2433 | icons with text or just text (wxWidgets needs fixing first though). |
---|
| 2434 | |
---|
| 2435 | * (Unix version): aven: Remove the ability to detach the menu bar (yell |
---|
| 2436 | if you actually used it and I'll restore it!) |
---|
| 2437 | |
---|
| 2438 | * aven: Add "all survey files" option to the "open file" dialog. |
---|
| 2439 | |
---|
[84f1ed1] | 2440 | * (MS Windows version): aven: Fix cursor keys to pan survey. |
---|
| 2441 | |
---|
[a884696] | 2442 | * (MS Windows version): Built with wxWidgets 2.6.3 instead of 2.6.2. |
---|
| 2443 | |
---|
[9fe7af4f] | 2444 | * (MS Windows version): Fix installer to work on Windows 2000 or XP if |
---|
| 2445 | run by an unprivileged user. |
---|
| 2446 | |
---|
| 2447 | * (MS Windows version): Upgrade to the latest version of InnoSetup (the |
---|
| 2448 | installer builder we use) and include new installer translations for |
---|
| 2449 | UK English, Spanish, Brazilian Portuguese, Italian, Romanian, and Slovak. |
---|
| 2450 | |
---|
| 2451 | * (MS Windows version): aven: Include Catalan and Brazilian Portuguese |
---|
| 2452 | translations of messages for wxWidgets (the GUI library we use). |
---|
| 2453 | |
---|
[cd39f67] | 2454 | * aven: Disable "Highlight exported points" if there aren't any. |
---|
| 2455 | |
---|
[afffec4] | 2456 | * Updates to French translation from Michel Bovey. Also updates to German, |
---|
[5e74c26] | 2457 | Italian, Catalan, Spanish, and Romanian translations. |
---|
[581624b] | 2458 | |
---|
[38a192d] | 2459 | * (Unix version): test suite: fix smoke test to pass even without X running |
---|
| 2460 | (it was meant to but the code had a bug). |
---|
| 2461 | |
---|
[5892e08] | 2462 | * aven: Check if OpenGL is available and exit cleanly with a helpful error |
---|
| 2463 | if it isn't. |
---|
| 2464 | |
---|
[879e9c3] | 2465 | * (Unix version): aven: Fix --help and --version to work without a working |
---|
| 2466 | X display (provided it's built with wxWidgets 2.5.1 or newer). |
---|
| 2467 | |
---|
[c8f929b] | 2468 | * aven: Automatically select the presentation tab of the notebook when the user |
---|
| 2469 | selects "New Presentation" or "Open Presentation". |
---|
| 2470 | |
---|
| 2471 | * aven: Fix "Delete" in the presentation list to not get passed on (and so not |
---|
| 2472 | reset to default view as well). |
---|
| 2473 | |
---|
| 2474 | * aven: Fix Ctrl+Insert in the presentation list not to segfault if the list is |
---|
| 2475 | empty. |
---|
| 2476 | |
---|
| 2477 | * aven: Fix Cursor Up and Down in the presentation list to move the highlight |
---|
| 2478 | up and down instead of being passed on and moving the survey. |
---|
| 2479 | |
---|
[9ad92cc] | 2480 | * aven: Improve SVG output compatibility. Tested with Mozilla Firefox 1.5, |
---|
[ecf2d23] | 2481 | Adobe's SVG browser plugin, Gimp 2.2.8, Gqview 2.0.0, Opera 8.5, |
---|
| 2482 | Safari 2.0.3, and InkScape 0.42. |
---|
[9ad92cc] | 2483 | |
---|
| 2484 | * aven: Put a 5mm border around exported SVG files to allow for station markers |
---|
| 2485 | and non-zero width lines. |
---|
| 2486 | |
---|
| 2487 | * aven: Fix crash when exporting as SVG or Sketch if labels or surface data |
---|
| 2488 | was turned on. |
---|
| 2489 | |
---|
| 2490 | * aven: Actually close the file we're exporting which fixes problems with it |
---|
| 2491 | not always being fully written. |
---|
| 2492 | |
---|
[920b066] | 2493 | Changes in 1.1.7 (2005.10.18): |
---|
[6662d02] | 2494 | |
---|
| 2495 | * cavern: Add validity checking for dates in *date commands (with feature |
---|
| 2496 | test in testsuite). A date entered as just "year" or "year.month" now |
---|
| 2497 | becomes a date range for the relevant period (previously it became a single |
---|
| 2498 | date near the middle of that period). |
---|
[e0c7cd1] | 2499 | |
---|
[8add4c9] | 2500 | * extend: Fixed 2 uninitialised flags (should fix erratic behaviour on |
---|
| 2501 | with MS Windows). |
---|
| 2502 | |
---|
[9f524ee] | 2503 | * extend: Default output name for a file called input.3d is now input_extend.3d |
---|
| 2504 | rather than just extend.3d (which was annoying if you wanted to extend |
---|
| 2505 | several surveys in the same directory). |
---|
| 2506 | |
---|
[185d793] | 2507 | * aven: OpenGL 2.0 always includes support for point sprites so rework |
---|
[3efd6b6] | 2508 | our check for them to include that knowledge. |
---|
[185d793] | 2509 | |
---|
[3515947] | 2510 | * aven: Regenerate depth bar if user switches to/from metric units. |
---|
| 2511 | |
---|
[1235f9b] | 2512 | * aven: Don't clear the "there" mark just because the mouse pointer has |
---|
| 2513 | moved off a station. |
---|
| 2514 | |
---|
[4299674] | 2515 | * aven: When processing a .svx file, put the resultant .3d file in the |
---|
[d74279d] | 2516 | same directory (since that's where we then try to load it from). |
---|
[4299674] | 2517 | |
---|
[60dbe70] | 2518 | * aven: Fix labelling of date colouring on 32 bit platforms. |
---|
| 2519 | |
---|
[125c9ea] | 2520 | * aven: If "colour by date" is on and we load a survey with no date info |
---|
| 2521 | (or all surveyed on the same date) then set "colour by none". |
---|
| 2522 | |
---|
[ec58e3d3] | 2523 | * aven: Make the error dialog modal and remove a signal handler once it |
---|
| 2524 | has fired to prevent endless (or seemingly endless) cascades of error |
---|
| 2525 | dialogs. |
---|
| 2526 | |
---|
[8add4c9] | 2527 | * aven: Enforce a minimum object volume diameter of 1m to avoid problems |
---|
| 2528 | if a survey file with only one station in is loaded. |
---|
| 2529 | |
---|
[6662d02] | 2530 | * aven: Fix problems with indicators disappearing when we're drawing |
---|
| 2531 | blobs and/or crosses the slow (but always supported) way. (Problem |
---|
[d74279d] | 2532 | introduced in 1.1.6). |
---|
[6662d02] | 2533 | |
---|
[b65c13f] | 2534 | * (Unix version): aven: Really stop setting extra toolbar margin when using |
---|
| 2535 | GTK2.0. The attempt to fix this in 1.1.3 failed because __WXGTK12__ is |
---|
| 2536 | set for GTK+ 1.2 or *any later release* so is true for GTK+ 2.0 too! |
---|
| 2537 | |
---|
[17cce5f] | 2538 | * (Unix version): aven: Add details of which of wxGTK, wxMotif, and wxX11 |
---|
| 2539 | we've been compiled with, and which GTK+/Motif version where appropriate. |
---|
| 2540 | |
---|
[affaeee] | 2541 | * (Unix version): Fixed build on Fedora Core 3. |
---|
| 2542 | |
---|
[618b01f] | 2543 | * documentation: Updates to 3d file format specification from Mike McCombe. |
---|
| 2544 | |
---|
[920b066] | 2545 | Changes in 1.1.6 (2005.10.10): |
---|
[7e01c87] | 2546 | |
---|
| 2547 | * (MS Windows version): Distribution is about a third smaller than 1.1.5 |
---|
| 2548 | (mostly because mingwm10.dll is no longer required). |
---|
| 2549 | |
---|
[b88b171] | 2550 | * aven: If aven is asked to load a .svx, .dat, or .mak file, run cavern on |
---|
| 2551 | it, showing cavern's output in a window (with errors and warnings clickable |
---|
| 2552 | to load the offending file into an editor), and then loading the resulting |
---|
| 2553 | 3d file. |
---|
| 2554 | |
---|
[7e01c87] | 2555 | * aven: Added "Colour by Date" option. |
---|
| 2556 | |
---|
| 2557 | * aven: Disable "Colour by Depth" option if there's no elevation variation. |
---|
| 2558 | |
---|
| 2559 | * aven: Don't crash if trying to load a survey with no elevation variation. |
---|
| 2560 | Instead turn off depth colouring. |
---|
| 2561 | |
---|
[8ea82aa] | 2562 | * aven: Export as HPGL added. |
---|
| 2563 | |
---|
[887c26e] | 2564 | * aven: Improved update of mouse coordinates and measuring line (thanks to |
---|
| 2565 | Martin Green). |
---|
| 2566 | |
---|
[7c29c976] | 2567 | * aven: Show the coordinates of either the mouse pointer or the nearest |
---|
| 2568 | survey station to it (if there is one near enough). Showing both was |
---|
| 2569 | confusing and meant the status bar overflowed on smaller displays. |
---|
| 2570 | |
---|
[7e01c87] | 2571 | * aven: When printing an extended elevation, don't show bearing and elevation. |
---|
[bd21214] | 2572 | |
---|
[7e01c87] | 2573 | * aven: Don't lock "flat" surveys which aren't extended elevations - a |
---|
| 2574 | flat survey with LRUD data isn't flat any more! |
---|
| 2575 | |
---|
| 2576 | * aven: When we have to draw blobs and crosses the slow way (because the |
---|
| 2577 | graphics hardware doesn't support the fast way), draw them so that they |
---|
| 2578 | should appear at the correct depth into the 3D scene instead of on top |
---|
| 2579 | of everything else. |
---|
| 2580 | |
---|
| 2581 | * aven: Make "play presentation backwards" icon green to match the other |
---|
| 2582 | presentation icons. |
---|
| 2583 | |
---|
| 2584 | * (MS Windows version): aven: Mouse clicks on the survey view now set the |
---|
| 2585 | keyboard focus there. |
---|
[bd21214] | 2586 | |
---|
[b46bf92] | 2587 | * (MS Windows version): aven: Fix first redraw of a newly loaded survey. |
---|
| 2588 | |
---|
[796d7bf] | 2589 | * (MS Windows version): aven: Fix redrawing of measuring line. |
---|
| 2590 | |
---|
[7e01c87] | 2591 | * cavern: Store dates for img_XSECT. |
---|
| 2592 | |
---|
| 2593 | * cavern: Fixed small one-off memory leak if you specify -o more than once. |
---|
| 2594 | |
---|
[b88b171] | 2595 | * (Unix version): Check environmental variable LC_MESSAGES when deciding what |
---|
| 2596 | language to use for messages. |
---|
| 2597 | |
---|
[7c29c976] | 2598 | * (MS Windows version): "Print" on a 3d file now prints through aven rather |
---|
| 2599 | than the separate printer driver (Unix has done this for some time). |
---|
| 2600 | |
---|
[8ea82aa] | 2601 | * Removed old printer drivers. |
---|
| 2602 | |
---|
[7e01c87] | 2603 | * img library: When creating a 3d file, ignore img_XSECT if we've been asked |
---|
| 2604 | to write a file format version which doesn't support it. |
---|
[8ea82aa] | 2605 | |
---|
[920b066] | 2606 | Changes in 1.1.5 (2005.09.20): |
---|
[106cfdf] | 2607 | |
---|
| 2608 | * (MS Windows version): aven: Fixed crash on start-up (introduced in 1.1.4). |
---|
| 2609 | |
---|
[4ba80e0] | 2610 | * aven: Make blobs round like they are in Survex 1.0. |
---|
| 2611 | |
---|
| 2612 | * aven: If the graphics drivers don't support drawing blobs using OpenGL |
---|
| 2613 | point markers, fall back to drawing filled circles. |
---|
| 2614 | |
---|
[95ce35f] | 2615 | * aven: If the graphics drivers support it, draw crosses as texture mapped |
---|
| 2616 | OpenGL point markers which is much faster. |
---|
[90d0d71] | 2617 | |
---|
[95ce35f] | 2618 | * aven: Cross size increased to match Survex 1.0. |
---|
| 2619 | |
---|
[cd78148] | 2620 | * aven: We must update which blobs are displayed if display of surface or |
---|
| 2621 | underground legs is toggled. |
---|
| 2622 | |
---|
[f5627353] | 2623 | * cavern: Fix handling of a *solve followed by survey data, none of which is |
---|
| 2624 | attached to the previous data. |
---|
| 2625 | |
---|
[dfe4a520] | 2626 | * cavern: Fixed "No survey data" error when a *solve is followed by another |
---|
| 2627 | *solve (or the implicit solve at the end of processing) with no data between |
---|
| 2628 | them. |
---|
| 2629 | |
---|
[920b066] | 2630 | Changes in 1.1.4 (2005.09.19): |
---|
[4855072] | 2631 | |
---|
| 2632 | * aven: Added Aven's icon to the "About" dialog. |
---|
| 2633 | |
---|
| 2634 | * aven: Use localised character for the decimal point (e.g. "," in most |
---|
| 2635 | continental European countries). |
---|
| 2636 | |
---|
| 2637 | * aven: Previously the survey tree would get focus and then take keypresses |
---|
| 2638 | (e.g. "P", "L", "Delete"). Now we pass most keypresses across so they |
---|
| 2639 | operate on the cave, and transfer the input focus across when we do. |
---|
| 2640 | |
---|
| 2641 | * aven: Make pressing "Return" in the tree control expand/collapse a subtree. |
---|
| 2642 | |
---|
| 2643 | * aven: Speed up intialisation by delaying creation of OpenGL lists until |
---|
| 2644 | they're needed. |
---|
| 2645 | |
---|
| 2646 | * aven: Added Mark Shinwell's bounding box with shadow of the survey. |
---|
| 2647 | |
---|
| 2648 | * aven: Disable the "Tubes" button/menu item when there's no LRUD data. |
---|
| 2649 | |
---|
| 2650 | * aven: Reworded "Restore Default Settings" as "Restore Default View". |
---|
| 2651 | |
---|
| 2652 | * (Unix version): aven: Set sensible default margins for printing and preserve |
---|
| 2653 | any margin values the user specifies between runs (previously margins |
---|
| 2654 | defaulted to 0 each time aven was run). |
---|
| 2655 | |
---|
| 2656 | * Documentation: Document *DATA PASSAGE in the manual. |
---|
| 2657 | |
---|
[920b066] | 2658 | Changes in 1.1.3 (2005.09.07): |
---|
[0e558e5] | 2659 | |
---|
| 2660 | * (Microsoft Windows version): Fixed build problems. |
---|
| 2661 | |
---|
| 2662 | * cavern: Allow OMIT character (-) for left/right/up/down. |
---|
| 2663 | |
---|
| 2664 | * aven: Remove an unnecessary menu separator. |
---|
| 2665 | |
---|
| 2666 | * aven: Fix "Find" and "Hide" toolbar buttons to work with GTK2.0. |
---|
| 2667 | |
---|
| 2668 | * aven: Make the tooltip for "Hide" show the number of found stations. |
---|
| 2669 | |
---|
| 2670 | * aven: If * or ? is used in a glob-style pattern, force a non-substring match. |
---|
| 2671 | |
---|
| 2672 | * aven: Enable "New Presentation" when there's a 3d file loaded, rather than |
---|
| 2673 | when there's a presentation loaded. |
---|
| 2674 | |
---|
| 2675 | * aven: Make entrances green in side panel tree list to match green blobs used |
---|
| 2676 | in cave view. |
---|
| 2677 | |
---|
| 2678 | * aven: Don't show surface labels if we're not showing surface data, etc. |
---|
| 2679 | |
---|
| 2680 | * aven: Merge "Start Rotation" and "Stop Rotation" into "Toggle Rotation" and |
---|
| 2681 | make "Space" the key for this. Keep Return working "Stop Rotation" so |
---|
| 2682 | existing users are happy, but don't advertise it. |
---|
| 2683 | |
---|
| 2684 | * aven: Normalise filename by adding any extension used, and use the normalised |
---|
| 2685 | filename for file history and window title. |
---|
| 2686 | |
---|
| 2687 | * (Unix version): aven: Stop setting extra toolbar margin when using GTK2.0 |
---|
| 2688 | as the toolbar buttons already have a sensible margin - the extra margin is |
---|
| 2689 | only needed with GTK1.2. |
---|
| 2690 | |
---|
| 2691 | * aven: Fix handling of plumb legs in tube model. |
---|
| 2692 | |
---|
| 2693 | * aven: Fixed swapped L and R in tube model. |
---|
| 2694 | |
---|
| 2695 | * extend: Preserve UD cross-section information in extended elevation. |
---|
| 2696 | |
---|
| 2697 | * extend: Add new messages for John Pybus' enhancements. |
---|
| 2698 | |
---|
| 2699 | Changes in 1.1.2 (never formally released): |
---|
[8faa5d8] | 2700 | |
---|
| 2701 | * Added support for LRUD data in .svx files, in .3d files, and aven can |
---|
| 2702 | now load and display it on screen and on printouts. The ability to "fake" |
---|
| 2703 | LRUD data in aven is gone for now but will reappear in some form later. |
---|
| 2704 | |
---|
| 2705 | * cavern: Removed support for writing Chasm's 3dx format. We're going to |
---|
| 2706 | fold any desirable missing chasm functionality into aven. |
---|
| 2707 | |
---|
| 2708 | * aven: Rearranged mouse actions as discussed on the mailing list. Added |
---|
| 2709 | cursors for each different mouse action to help the user learn what each |
---|
| 2710 | does. Also added cursors for the "compass" and "clino" as well as the |
---|
| 2711 | scalebar to suggest to the user that they can be dragged to change the view. |
---|
[1a09e2c] | 2712 | |
---|
[0e558e5] | 2713 | * (Unix version): aven: Don't segfault if LANG isn't a known language. |
---|
[8faa5d8] | 2714 | |
---|
| 2715 | * tests/smoketest.tst: If X windows is running, check that we can run aven |
---|
| 2716 | with --help and --version. |
---|
| 2717 | |
---|
| 2718 | * tests/cavern.tst: Fixed cavern.tst to warn if it is skipping a test because |
---|
| 2719 | no results are listed for it. This revealed that there was a "newline" test |
---|
[6225339] | 2720 | which should have been called "badnewline", and was a broken testcase too! |
---|
[8faa5d8] | 2721 | Fixed all these problems. |
---|
| 2722 | |
---|
| 2723 | * cavern: Applied Simeon Warner's patch for handling backcompass, backclino, |
---|
| 2724 | and omitted forward compass/clino readings in Compass DAT files. Added |
---|
| 2725 | a feature test for this to the testsuite. |
---|
| 2726 | |
---|
| 2727 | * It no longer makes sense to have an option not to build aven or to build aven |
---|
[0e558e5] | 2728 | without OpenGL so remove old machinery for this from configure and the |
---|
| 2729 | sources. |
---|
[8faa5d8] | 2730 | |
---|
[0e558e5] | 2731 | * (Unix version): configure: Check if "-lXxf86vm" is needed. |
---|
[8faa5d8] | 2732 | |
---|
| 2733 | * configure: Better output for strcasecmp test. |
---|
| 2734 | |
---|
| 2735 | * aven: Fix crosses to work much better. Not a total fix - their position |
---|
| 2736 | in the Z buffer isn't correct and they're rather slow to plot. |
---|
| 2737 | |
---|
| 2738 | * aven: Don't regenerate the hittest grid every time the mouse moves while |
---|
| 2739 | animating, which solves the mysterious pausing effect (thanks go to Martin |
---|
| 2740 | Green for spotting this!) Also clear all the status bar coordinates when |
---|
| 2741 | animating. |
---|
| 2742 | |
---|
| 2743 | * aven: Sort out clashing menu shortcuts in some languages. |
---|
| 2744 | |
---|
| 2745 | * aven: Fixed compilation problem on x86_64 |
---|
| 2746 | |
---|
| 2747 | * SPUD: Pruned out stuff which has been done or which is not actually relevant |
---|
| 2748 | to this branch. |
---|
| 2749 | |
---|
| 2750 | * Merge various changes from 1.0 branch: |
---|
| 2751 | |
---|
| 2752 | + aven: Port over "printing from aven" functionality. |
---|
| 2753 | |
---|
| 2754 | + aven: Port over "export as" functionality, |
---|
| 2755 | |
---|
| 2756 | + Add David Loeffler's vim mode for .svx files. |
---|
| 2757 | |
---|
| 2758 | * aven: Fix check for whether a label is behind us in perspective view. |
---|
[1a09e2c] | 2759 | |
---|
[8faa5d8] | 2760 | * aven: Don't use an opengl list for drawing the indicators - we typically make |
---|
| 2761 | a new list each time we plot them anyway. |
---|
| 2762 | |
---|
| 2763 | * Remove lingering traces of support for RISC OS and pre-386 MSDOS |
---|
| 2764 | |
---|
| 2765 | * aven: Set icon on non-Windows platforms too. This means that with |
---|
[0e558e5] | 2766 | WindowMaker on Unix you get an icon on the AppIcon by default. |
---|
[8faa5d8] | 2767 | |
---|
| 2768 | * configure: Update wxWindows checks to handle newer wx versions. |
---|
| 2769 | |
---|
| 2770 | * Make all maintainer perl scripts "use bytes;" to avoid utf-8 double encoding |
---|
| 2771 | problems. They also all require Perl 5.8 now (hopefully this isn't an issue |
---|
| 2772 | for anyone building from CVS). |
---|
| 2773 | |
---|
| 2774 | * acinclude.m4: Quote macro name for fix autotools warning. |
---|
| 2775 | |
---|
[4855072] | 2776 | * Documentation: "tilt up" is "'" not ",". |
---|
[8faa5d8] | 2777 | |
---|
| 2778 | * aven: Add support for mousewheels (to tilt the cave). |
---|
| 2779 | |
---|
| 2780 | * aven: Fixed twisted transitions to and from pitches in certain cases. |
---|
| 2781 | |
---|
[0e558e5] | 2782 | * aven: Pick a sensible initial window size when the user's desktop is spread |
---|
| 2783 | over more than one monitor (works best with wx2.5 or newer, but try to do |
---|
[8faa5d8] | 2784 | better with wx2.4 or earlier as well). |
---|
| 2785 | |
---|
| 2786 | * aven: Initialise GfxCore slightly later to avoid visual glitch from notebook |
---|
| 2787 | contents being visible before any survey is loaded. |
---|
| 2788 | |
---|
| 2789 | * aven: Allow a coloured texture to be used |
---|
| 2790 | |
---|
| 2791 | * aven: Don't initialise until we have data (to the user, this means the window |
---|
[0130bc4] | 2792 | is default colour (grey for most systems) not black until a survey is |
---|
| 2793 | loaded). |
---|
[8faa5d8] | 2794 | |
---|
| 2795 | * aven: Fixed weird "shadowed" icons. |
---|
| 2796 | |
---|
[920b066] | 2797 | Changes in 1.1.1 (2004-10-06): |
---|
[a7aa27d9] | 2798 | |
---|
| 2799 | * (Microsoft Windows version): aven: Hopefully fix loading a survey file at |
---|
[1a09e2c] | 2800 | startup. |
---|
[a7aa27d9] | 2801 | |
---|
| 2802 | * aven: Delay loading the bitmap for the "About" dialog until it is first |
---|
| 2803 | needed. We want start up to be as quick as possible. |
---|
| 2804 | |
---|
[920b066] | 2805 | Changes between 1.0.32 and 1.1.0 (never formally released): |
---|
[edb6576] | 2806 | |
---|
[91e416e] | 2807 | * NOTE: Survex 1.1.X releases are development snapshots made available for |
---|
| 2808 | the purposes of allowing wider testing and getting more user feedback. Once |
---|
| 2809 | the code has stabilised the version number will be raised to 1.2.0. |
---|
[edb6576] | 2810 | |
---|
[91e416e] | 2811 | * aven: Now uses OpenGL for 3d rendering - you may need to install drivers if |
---|
| 2812 | you're using Windows 95 - these can be obtained from: |
---|
| 2813 | http://download.microsoft.com/download/win95upg/info/1/W95/EN-US/Opengl95.exe |
---|
[edb6576] | 2814 | |
---|
[91e416e] | 2815 | * aven: Solid passages - passage dimensions are currently inferred from |
---|
| 2816 | the leg length (pretty effective as you can measure longer legs in |
---|
| 2817 | larger passages). Use of real LRUD data coming soon... |
---|
[edb6576] | 2818 | |
---|
[91e416e] | 2819 | * aven: Depth colouring is now continuously varying. |
---|
[edb6576] | 2820 | |
---|
[0580c6a] | 2821 | * aven: Colour by depth can now be turned off (and there's the start of a |
---|
| 2822 | framework for properly implementing colour by date, error, etc). |
---|
| 2823 | |
---|
[4261983] | 2824 | * aven: Find stations moved onto the toolbar and now uses a simple wildcarded |
---|
| 2825 | match (? matches any character, * matches any number of characters). |
---|
| 2826 | |
---|
| 2827 | * aven: We now use the status bar for coordinates, distances, etc to make |
---|
| 2828 | better use of screen space. |
---|
[edb6576] | 2829 | |
---|
[f80077a] | 2830 | * aven: Full screen mode (F11). |
---|
[edb6576] | 2831 | |
---|
[6abab84] | 2832 | * aven: Perspective view. |
---|
| 2833 | |
---|
[91e416e] | 2834 | * aven: Context sensitive cursor shape - needs more work. |
---|
[edb6576] | 2835 | |
---|
[91e416e] | 2836 | * aven: Mouse actions changed (hopefully they're now more natural, but |
---|
| 2837 | you may find the change disorientating - feedback wanted on this). |
---|
[edb6576] | 2838 | |
---|
[1690fa9] | 2839 | * aven: Added "presentations" which allow you to set up fly-through paths |
---|
| 2840 | and load/save/run them. |
---|
| 2841 | |
---|
[0580c6a] | 2842 | * aven: A presentation can be exported as a movie file. |
---|
| 2843 | |
---|
[045e2af] | 2844 | * aven: Added Save screenshot facility. |
---|
| 2845 | |
---|
[c60062d] | 2846 | * aven: Depth fogging option. |
---|
| 2847 | |
---|
[0580c6a] | 2848 | * aven: Added Smooth Lines option. |
---|
| 2849 | |
---|
| 2850 | * aven: Added Textured Walls option. |
---|
| 2851 | |
---|
[f433fda] | 2852 | * aven: If a survey has surface legs but no underground legs, default to |
---|
| 2853 | showing the surface legs. |
---|
| 2854 | |
---|
[0580c6a] | 2855 | * cavern: Dates given to *date are now stored in the 3d file. |
---|