Context Navigation

zh_CN.po@ 8377f15

Visit:

RELEASE/1.2 debug-ci debug-ci-sanitisers faster-cavernlog log-select main stereo stereo-2025 walls-data walls-data-hanging-as-warning warn-only-for-hanging-survey

Last change on this file since 8377f15 was 8377f15, checked in by Olly Betts <olly@…>, 11 years ago
lib/: Update and merge translations.
Property mode set to `100644`
File size: 68.7 KB

Line
1	msgid ""
2	msgstr ""
3	"Project-Id-Version: survex\n"
4	"Report-Msgid-Bugs-To: olly@survex.com\n"
5	"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6	"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
7	"Last-Translator: Olly Betts <olly@survex.com>\n"
8	"Language-Team: \n"
9	"MIME-Version: 1.0\n"
10	"Content-Type: text/plain; charset=utf-8\n"
11	"Content-Transfer-Encoding: 8bit\n"
12	"Language: zh_CN\n"
13
14	#. TRANSLATORS: Aven menu titles. An “&” goes before the letter of any
15	#. accelerator key. The accelerators must be different within this group
16	#: ../src/mainfrm.cc:972
17	#: n:210
18	msgid "&File"
19	msgstr "文件(&F)"
20
21	#: ../src/mainfrm.cc:973
22	#: n:211
23	msgid "&Rotation"
24	msgstr "旋转(&R)"
25
26	#: ../src/mainfrm.cc:974
27	#: n:212
28	msgid "&Orientation"
29	msgstr "方向(&O)"
30
31	#: ../src/mainfrm.cc:975
32	#: n:213
33	msgid "&View"
34	msgstr "查看(&V)"
35
36	#: ../src/mainfrm.cc:977
37	#: n:214
38	msgid "&Controls"
39	msgstr "控制(&C)"
40
41	#: ../src/mainfrm.cc:986
42	#: n:215
43	msgid "&Help"
44	msgstr "帮助(&H)"
45
46	#: ../src/mainfrm.cc:979
47	#: n:216
48	msgid "&Presentation"
49	msgstr "演示文档(&P)"
50
51	#. TRANSLATORS: as in: Usage: cavern …
52	#: ../src/cmdline.c:168
53	#: n:49
54	msgid "Usage"
55	msgstr "使用"
56
57	#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
58	#. was trying to allocate space for.
59	#: ../src/message.c:85
60	#: n:1
61	#, fuzzy, c-format
62	msgid "Out of memory (couldn’t find %lu bytes)."
63	msgstr "内存耗尽 (%lu 字节)"
64
65	#. TRANSLATORS: %s will be replaced by the filename that we were trying
66	#. to read when we ran out of memory.
67	#: ../src/img_hosted.c:34
68	#: n:38
69	#, fuzzy, c-format
70	msgid "Out of memory trying to read file “%s”"
71	msgstr "内存耗尽: “%s”"
72
73	#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
74	#. greater" if that gives a more natural translation. It's
75	#. technically not quite right when there are parallel active release
76	#. series (e.g. Survex 1.0.40 was released after 1.2.0), but this
77	#. seems unlikely to confuse users. "Survex" is the name of the
78	#. software, so should not be translated.
79	#.
80	#. Here "survey" is a "cave map" rather than list of questions - it should be
81	#. translated to the terminology that cavers using the language would use.
82	#: ../src/commands.c:2022
83	#: n:2
84	#, c-format
85	msgid "Survex version %s or greater required to process this survey data."
86	msgstr ""
87
88	#. TRANSLATORS: Indicates a warning message e.g.:
89	#. "spoon.svx:12: warning: *prefix is deprecated"
90	#: ../src/aven.cc:397
91	#: ../src/cavernlog.cc:245
92	#: ../src/message.c:1252
93	#: n:4
94	msgid "warning"
95	msgstr "警告"
96
97	#. TRANSLATORS: Indicates an error message e.g.:
98	#. "spoon.svx:13:4: error: Field may not be omitted"
99	#: ../src/cavernlog.cc:244
100	#: ../src/message.c:1256
101	#: n:93
102	msgid "error"
103	msgstr "错误"
104
105	#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
106	#. by the line number in that file. Your translation should also contain
107	#. %s:%u so that automatic parsing of error messages to determine the file
108	#. and line number still works.
109	#: ../src/datain.c:109
110	#: n:5
111	#, c-format
112	msgid "In file included from %s:%u:\n"
113	msgstr ""
114
115	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
116	#. http://en.wikipedia.org/wiki/Deprecation
117	#: ../src/commands.c:560
118	#: n:6
119	msgid "prefix is deprecated - use begin and *end instead"
120	msgstr ""
121
122	#. TRANSLATORS: Here "station" is a survey station, not a train station.
123	#: ../src/readval.c:206
124	#: n:7
125	#, c-format
126	msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
127	msgstr ""
128
129	#: ../src/readval.c:387
130	#: n:8
131	msgid "Field may not be omitted"
132	msgstr ""
133
134	#: ../src/datain.c:1530
135	#: ../src/datain.c:1816
136	#: ../src/readval.c:389
137	#: ../src/readval.c:430
138	#: ../src/readval.c:460
139	#: n:9
140	#, c-format
141	msgid "Expecting numeric field, found “%s”"
142	msgstr ""
143
144	#: ../src/commands.c:1620
145	#: n:10
146	#, c-format
147	msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
148	msgstr ""
149
150	#: ../src/debug.h:45
151	#: ../src/debug.h:47
152	#: ../src/matrix.c:352
153	#: ../src/message.c:238
154	#: n:11
155	msgid "Bug in program detected! Please report this to the authors"
156	msgstr ""
157
158	#: ../src/commands.c:2137
159	#: ../src/extend.c:436
160	#: n:12
161	#, c-format
162	msgid "Unknown command “%s”"
163	msgstr ""
164
165	#. TRANSLATORS: Here "station" is a survey station, not a train station.
166	#: ../src/netbits.c:449
167	#: n:13
168	#, c-format
169	msgid "Station “%s” equated to itself"
170	msgstr ""
171
172	#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
173	#. survey stations.
174	#: ../src/datain.c:1051
175	#: n:14
176	msgid "Compass reading may not be omitted except on plumbed legs"
177	msgstr ""
178
179	#: ../src/datain.c:284
180	#: ../src/extend.c:441
181	#: n:15
182	msgid "End of line not blank"
183	msgstr ""
184
185	#: ../src/cavern.c:393
186	#: n:16
187	#, c-format
188	msgid "There were %d warning(s)."
189	msgstr ""
190
191	#. TRANSLATORS: %s is replaced by the command we attempted to run.
192	#: ../src/cavernlog.cc:176
193	#: ../src/cavernlog.cc:236
194	#: n:17
195	#, c-format
196	msgid "Couldn’t run external command: “%s”"
197	msgstr "命令 “%s” 执行失败"
198
199	#: ../src/datain.c:80
200	#: ../src/datain.c:88
201	#: ../src/datain.c:95
202	#: ../src/datain.c:770
203	#: ../src/extend.c:559
204	#: ../src/sorterr.c:80
205	#: ../src/sorterr.c:97
206	#: ../src/sorterr.c:240
207	#: n:18
208	msgid "Error reading file"
209	msgstr "读文件出错"
210
211	#: ../src/message.c:1272
212	#: n:19
213	msgid "Too many errors - giving up"
214	msgstr ""
215
216	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
217	#. http://en.wikipedia.org/wiki/Deprecation
218	#: ../src/commands.c:1499
219	#: n:20
220	msgid "DEFAULT is deprecated - use CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
221	msgstr ""
222
223	#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
224	#. (a weight on a string). So the problem here is that the leg is
225	#. vertical, so a compass reading has no meaning!
226	#: ../src/datain.c:1022
227	#: n:21
228	msgid "Compass reading given on plumbed leg"
229	msgstr ""
230
231	#: ../src/commands.c:648
232	#: n:22
233	msgid "END with no matching BEGIN in this file"
234	msgstr ""
235
236	#: ../src/datain.c:757
237	#: n:23
238	msgid "BEGIN with no matching END in this file"
239	msgstr ""
240
241	#. TRANSLATORS: A station must be exported out of each level it is in, so
242	#. this would give "Station “\outer.inner.1” not exported from survey
243	#. “\outer”)":
244	#.
245	#. *equate entrance outer.inner.1
246	#. *begin outer
247	#. *begin inner
248	#. *export 1
249	#. 1 2 1.23 045 -6
250	#. *end inner
251	#. *end outer
252	#.
253	#. Here "survey" is a "cave map" rather than list of questions - it should be
254	#. translated to the terminology that cavers using the language would use.
255	#: ../src/commands.c:964
256	#: ../src/commands.c:966
257	#: ../src/listpos.c:104
258	#: ../src/readval.c:328
259	#: ../src/readval.c:331
260	#: n:26
261	#, c-format
262	msgid "Station “%s” not exported from survey “%s”"
263	msgstr ""
264
265	#. TRANSLATORS: This error occurs if there's an attempt to
266	#. export a station from a survey which doesn't actually exist.
267	#.
268	#. Here "survey" is a "cave map" rather than list of questions - it should be
269	#. translated to the terminology that cavers using the language would use.
270	#: ../src/listpos.c:112
271	#: n:286
272	#, c-format
273	msgid "Reference to station “%s” from non-existent survey “%s”"
274	msgstr ""
275
276	#. TRANSLATORS: Here "station" is a survey station, not a train station.
277	#.
278	#. Here "survey" is a "cave map" rather than list of questions - it should be
279	#. translated to the terminology that cavers using the language would use.
280	#: ../src/readval.c:302
281	#: n:27
282	#, c-format
283	msgid "“%s” can’t be both a station and a survey"
284	msgstr ""
285
286	#. TRANSLATORS: Here "station" is a survey station, not a train station.
287	#: ../src/extend.c:248
288	#: ../src/extend.c:267
289	#: ../src/extend.c:312
290	#: ../src/extend.c:354
291	#: ../src/extend.c:396
292	#: ../src/readval.c:202
293	#: n:28
294	msgid "Expecting station name"
295	msgstr ""
296
297	#: ../src/commands.c:1948
298	#: n:31
299	#, c-format
300	msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
301	msgstr ""
302
303	#: ../src/commands.c:1955
304	#: n:32
305	#, c-format
306	msgid "Found “%s”, expecting “ON” or “OFF”"
307	msgstr ""
308
309	#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
310	#. translated.
311	#.
312	#. Here "station" is a survey station, not a train station.
313	#: ../src/commands.c:924
314	#: n:33
315	msgid "Only one station in EQUATE command"
316	msgstr ""
317
318	#: ../src/commands.c:410
319	#: n:34
320	#, c-format
321	msgid "Unknown quantity “%s”"
322	msgstr ""
323
324	#: ../src/commands.c:327
325	#: n:35
326	#, c-format
327	msgid "Unknown units “%s”"
328	msgstr ""
329
330	#: ../src/commands.c:1788
331	#: ../src/commands.c:1863
332	#: n:434
333	msgid "Unknown coordinate system"
334	msgstr ""
335
336	#: ../src/commands.c:1883
337	#: ../src/commands.c:1908
338	#: n:443
339	#, c-format
340	msgid "Invalid coordinate system: %s"
341	msgstr ""
342
343	#: ../src/commands.c:1870
344	#: ../src/commands.c:1888
345	#: n:435
346	msgid "Coordinate system unsuitable for output"
347	msgstr ""
348
349	#: ../src/commands.c:824
350	#: n:436
351	msgid "Failed to convert coordinates"
352	msgstr ""
353
354	#: ../src/commands.c:829
355	#: n:437
356	msgid "The input projection is set but the output projection isn't"
357	msgstr ""
358
359	#: ../src/commands.c:831
360	#: n:438
361	msgid "The output projection is set but the input projection isn't"
362	msgstr ""
363
364	#: ../src/commands.c:731
365	#: n:439
366	msgid "Coordinates can't be omitted when coordinate system has been specified"
367	msgstr ""
368
369	#. TRANSLATORS: Used when a BEGIN command has no survey, but the
370	#. END command does, e.g.:
371	#.
372	#. *begin
373	#. 1 2 10.00 178 -01
374	#. *end entrance <--[Message given here]
375	#: ../src/commands.c:670
376	#: n:36
377	msgid "Matching BEGIN command has no survey name"
378	msgstr ""
379
380	#. TRANSLATORS: Note: In English you talk about the units of a single
381	#. measurement, but the correct term in other languages may be singular.
382	#: ../src/commands.c:340
383	#: n:37
384	#, c-format
385	msgid "Invalid units “%s” for quantity"
386	msgstr ""
387
388	#: ../src/commands.c:403
389	#: n:39
390	#, c-format
391	msgid "Unknown instrument “%s”"
392	msgstr ""
393
394	#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
395	#. translate
396	#: ../src/commands.c:1467
397	#: n:40
398	msgid "Scale factor must be 1.0 for DECLINATION"
399	msgstr ""
400
401	#. TRANSLATORS: If the scale factor for an instrument is zero, then any
402	#. reading would be mapped to zero, which doesn't make sense.
403	#: ../src/commands.c:1473
404	#: n:391
405	msgid "Scale factor must be non-zero"
406	msgstr ""
407
408	#: ../src/commands.c:1518
409	#: n:41
410	#, c-format
411	msgid "Unknown setting “%s”"
412	msgstr ""
413
414	#: ../src/commands.c:448
415	#: n:42
416	#, c-format
417	msgid "Unknown character class “%s”"
418	msgstr ""
419
420	#: ../src/extend.c:605
421	#: ../src/netskel.c:90
422	#: n:43
423	msgid "No survey data"
424	msgstr ""
425
426	#: ../src/filename.c:52
427	#: ../src/img_hosted.c:35
428	#: n:44
429	#, c-format
430	msgid "Filename “%s” refers to directory"
431	msgstr ""
432
433	#: ../src/netartic.c:384
434	#: n:45
435	msgid "Survey not all connected to fixed stations"
436	msgstr ""
437
438	#: ../src/commands.c:854
439	#: ../src/datain.c:682
440	#: n:46
441	msgid "Station already fixed or equated to a fixed point"
442	msgstr ""
443
444	#: ../src/cavern.c:298
445	#: ../src/filename.c:55
446	#: ../src/img_hosted.c:36
447	#: n:47
448	#, c-format
449	msgid "Failed to open output file “%s”"
450	msgstr ""
451
452	#: ../src/commands.c:1573
453	#: n:48
454	msgid "Standard deviation must be positive"
455	msgstr ""
456
457	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
458	#. "survey stations".
459	#.
460	#. %s is replaced by the name of the station.
461	#: ../src/netbits.c:346
462	#: n:50
463	#, c-format
464	msgid "Survey leg with same station (“%s”) at both ends - typing error?"
465	msgstr ""
466
467	#. TRANSLATORS: Degrees are the angular measurement where there are
468	#. 360 in a full circle.
469	#: ../src/datain.c:969
470	#: ../src/datain.c:977
471	#: ../src/datain.c:989
472	#: n:51
473	msgid "Clino reading over 90 degrees (absolute value)"
474	msgstr ""
475
476	#: ../src/netbits.c:464
477	#: n:52
478	#, c-format
479	msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
480	msgstr ""
481
482	#. TRANSLATORS: "equal" as in:
483	#.
484	#. *fix a 1 2 3
485	#. *fix b 1 2 3
486	#. *equate a b
487	#: ../src/netbits.c:475
488	#: n:53
489	#, c-format
490	msgid "Equating two equal fixed points: “%s” and “%s”"
491	msgstr ""
492
493	#. TRANSLATORS: " *fix a " gives this message:
494	#: ../src/commands.c:741
495	#: n:54
496	msgid "FIX command with no coordinates - fixing at (0,0,0)"
497	msgstr ""
498
499	#. TRANSLATORS: fix a 1 2 3 / fix a 1 2 3
500	#: ../src/commands.c:858
501	#: ../src/datain.c:684
502	#: n:55
503	msgid "Station already fixed at the same coordinates"
504	msgstr ""
505
506	#. TRANSLATORS: Emitted after second and subsequent "FIX command with
507	#. no coordinates - fixing at (0,0,0)" warnings.
508	#: ../src/commands.c:749
509	#: n:441
510	#, c-format
511	msgid "Already had FIX command with no coordinates for station “%s”"
512	msgstr ""
513
514	#: ../src/commands.c:1673
515	#: n:442
516	#, c-format
517	msgid "Station “%s” fixed before CS command first used"
518	msgstr ""
519
520	#. TRANSLATORS: The EXPORT command is only valid just after BEGIN
521	#. <SURVEY>, so this would generate this error:
522	#.
523	#. *begin fred
524	#. 1 2 1.23 045 -6
525	#. *export 2
526	#. *end fred
527	#: ../src/commands.c:2151
528	#: n:57
529	msgid "EXPORT must immediately follow “BEGIN <SURVEY>”"
530	msgstr ""
531
532	#: ../src/readval.c:516
533	#: n:58
534	msgid "Invalid year (< 1900 or > 2078)"
535	msgstr ""
536
537	#. TRANSLATORS: Suspicious means something like 410 degrees or -20
538	#. degrees
539	#: ../src/datain.c:867
540	#: ../src/datain.c:876
541	#: n:59
542	msgid "Suspicious compass reading"
543	msgstr ""
544
545	#: ../src/datain.c:1506
546	#: n:60
547	msgid "Negative tape reading"
548	msgstr ""
549
550	#: ../src/commands.c:736
551	#: n:61
552	msgid "Same station fixed twice with no coordinates"
553	msgstr ""
554
555	#. TRANSLATORS: This means that the data fed in said this.
556	#.
557	#. It could be a gross error (e.g. the decimal point is missing from the
558	#. depth gauge reading) or it could just be due to random error on a near
559	#. vertical leg
560	#: ../src/datain.c:1205
561	#: n:62
562	msgid "Tape reading is less than change in depth"
563	msgstr ""
564
565	#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
566	#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
567	#. neither style nor reading is a keyword in the program This error
568	#. complains about a depth gauge reading in normal style, for example
569	#: ../src/commands.c:1185
570	#: n:63
571	#, c-format
572	msgid "Reading “%s” not allowed in data style “%s”"
573	msgstr ""
574
575	#. TRANSLATORS: i.e. not enough readings for the style.
576	#: ../src/commands.c:1370
577	#: n:64
578	#, c-format
579	msgid "Too few readings for data style “%s”"
580	msgstr ""
581
582	#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
583	#: ../src/commands.c:1145
584	#: n:65
585	#, c-format
586	msgid "Data style “%s” unknown"
587	msgstr ""
588
589	#. TRANSLATORS: Here "station" is a survey station, not a train station.
590	#.
591	#. Exporting a station twice gives this error:
592	#.
593	#. *begin example
594	#. *export 1
595	#. *export 1
596	#. 1 2 1.24 045 -6
597	#. *end example
598	#: ../src/commands.c:1015
599	#: n:66
600	#, c-format
601	msgid "Station “%s” already exported"
602	msgstr ""
603
604	#. TRANSLATORS: complains about a situation like trying to define
605	#. two from stations per leg
606	#: ../src/commands.c:1211
607	#: n:67
608	#, c-format
609	msgid "Duplicate reading “%s”"
610	msgstr ""
611
612	#: ../src/commands.c:885
613	#: n:68
614	#, c-format
615	msgid "FLAG “%s” unknown"
616	msgstr ""
617
618	#: ../src/readval.c:474
619	#: n:69
620	msgid "Missing \""
621	msgstr "已丢失 \""
622
623	#. TRANSLATORS: Here "station" is a survey station, not a train station.
624	#: ../src/listpos.c:122
625	#: n:70
626	#, c-format
627	msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
628	msgstr ""
629
630	#. TRANSLATORS: Here "station" is a survey station, not a train
631	#. station.
632	#: ../src/netartic.c:396
633	#: n:71
634	msgid "The following survey stations are not attached to a fixed point:"
635	msgstr ""
636
637	#: ../src/netskel.c:135
638	#: n:72
639	#, c-format
640	msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
641	msgstr ""
642
643	#. TRANSLATORS: fixed survey station that is not part of any survey
644	#: ../src/netskel.c:958
645	#: n:73
646	#, c-format
647	msgid "Unused fixed point “%s”"
648	msgstr ""
649
650	#: ../src/matrix.c:123
651	#: n:74
652	msgid "Network solved by reduction - no simultaneous equations to solve."
653	msgstr ""
654
655	#: ../src/matrix.c:134
656	#: n:75
657	#, c-format
658	msgid "Solving %d simultaneous equations"
659	msgstr ""
660
661	#: ../src/commands.c:1273
662	#: n:77
663	#, c-format
664	msgid "Reading “%s” duplicates previous reading(s)"
665	msgstr ""
666
667	#: ../src/matrix.c:132
668	#: n:78
669	msgid "Solving one equation"
670	msgstr ""
671
672	#: ../src/datain.c:940
673	#: ../src/datain.c:1194
674	#: ../src/datain.c:1387
675	#: n:79
676	msgid "Negative adjusted tape reading"
677	msgstr ""
678
679	#: ../src/commands.c:2059
680	#: ../src/commands.c:2079
681	#: n:80
682	msgid "Date is in the future!"
683	msgstr ""
684
685	#: ../src/commands.c:2083
686	#: n:81
687	msgid "End of date range is before the start"
688	msgstr ""
689
690	#. TRANSLATORS: e.g. the user specifies a passage cross-section at
691	#. station "entrance.27", but there is no station "entrance.27" in
692	#. the centre-line.
693	#: ../src/netskel.c:1046
694	#: n:83
695	#, c-format
696	msgid "Cross section specified at non-existent station “%s”"
697	msgstr ""
698
699	#. TRANSLATORS: In data with backsights, the user has tried to give a
700	#. plumb for the foresight and a clino reading for the backsight, or
701	#. something similar.
702	#: ../src/datain.c:1006
703	#: ../src/datain.c:1030
704	#: n:84
705	msgid "CLINO and BACKCLINO readings must be of the same type"
706	msgstr ""
707
708	#: ../src/readval.c:524
709	#: n:86
710	msgid "Invalid month"
711	msgstr ""
712
713	#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
714	#: ../src/readval.c:533
715	#: n:87
716	msgid "Invalid day of the month"
717	msgstr ""
718
719	#: ../src/cavern.c:247
720	#: n:88
721	#, c-format
722	msgid "3d file format versions %d to %d supported"
723	msgstr ""
724
725	#: ../src/readval.c:200
726	#: n:89
727	msgid "Expecting survey name"
728	msgstr ""
729
730	#: ../src/datain.c:401
731	#: ../src/extend.c:554
732	#: ../src/img_hosted.c:30
733	#: ../src/mainfrm.cc:426
734	#: ../src/printwx.cc:1571
735	#: ../src/sorterr.c:146
736	#: n:24
737	#, c-format
738	msgid "Couldn’t open file “%s”"
739	msgstr "无法打开文件 “%s”"
740
741	#: ../src/printwx.cc:685
742	#: n:402
743	#, c-format
744	msgid "Couldn’t write file “%s”"
745	msgstr ""
746
747	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
748	#. http://en.wikipedia.org/wiki/Deprecation
749	#: ../src/commands.c:467
750	#: ../src/commands.c:540
751	#: ../src/commands.c:562
752	#: ../src/commands.c:1160
753	#: ../src/commands.c:1501
754	#: ../src/readval.c:96
755	#: n:95
756	msgid "Further uses of this deprecated feature will not be reported"
757	msgstr ""
758
759	#. TRANSLATORS: Degrees are the angular measurement where there are
760	#. 360 in a full circle.
761	#: ../src/datain.c:906
762	#: n:98
763	#, c-format
764	msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
765	msgstr ""
766
767	#. TRANSLATORS: Degrees are the angular measurement where
768	#. there are 360 in a full circle.
769	#: ../src/datain.c:1082
770	#: n:99
771	#, c-format
772	msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
773	msgstr ""
774
775	#: ../src/commands.c:1157
776	#: n:104
777	#, c-format
778	msgid "“data %s %c …” is deprecated - use “data %s …” instead"
779	msgstr ""
780
781	#. TRANSLATORS: Perhaps the user tried to load a different type of file as
782	#. a Survex .3d file, or the .3d file was corrupted.
783	#: ../src/3dtopos.c:157
784	#: ../src/3dtopos.c:163
785	#: ../src/cad3d.c:909
786	#: ../src/cad3d.c:920
787	#: ../src/img_hosted.c:39
788	#: n:106
789	#, c-format
790	msgid "Bad 3d image file “%s”"
791	msgstr ""
792
793	#. TRANSLATORS: This is the date format string used to timestamp .3d
794	#. files internally. Probably best to keep it the same for all
795	#. translations.
796	#: ../src/img.c:43
797	#: ../src/mainfrm.cc:1450
798	#: n:107
799	#, c-format
800	msgid "%a,%Y.%m.%d %H:%M:%S %Z"
801	msgstr ""
802
803	#. TRANSLATORS: used a processed survey with no processing date/time info
804	#: ../src/mainfrm.cc:1443
805	#: n:108
806	msgid "Date and time not available."
807	msgstr ""
808
809	#: ../src/img_hosted.c:40
810	#: n:109
811	#, fuzzy, c-format
812	msgid "Error reading from file “%s”"
813	msgstr "读文件出错: “%s”"
814
815	#: ../src/cavernlog.cc:522
816	#: ../src/filename.c:79
817	#: ../src/img_hosted.c:41
818	#: ../src/mainfrm.cc:384
819	#: ../src/mainfrm.cc:2008
820	#: n:110
821	#, fuzzy, c-format
822	msgid "Error writing to file “%s”"
823	msgstr "写入文件出错: “%s”"
824
825	#: ../src/filename.c:82
826	#: n:111
827	msgid "Error writing to file"
828	msgstr "写入文件出错"
829
830	#: ../src/cavern.c:388
831	#: n:113
832	#, c-format
833	msgid "There were %d warning(s) and %d error(s) - no output files produced."
834	msgstr ""
835
836	#: ../src/img_hosted.c:42
837	#: n:114
838	#, c-format
839	msgid "File “%s” has a newer format than this program can understand"
840	msgstr ""
841
842	#: ../src/printwx.cc:1033
843	#: n:115
844	msgid "North"
845	msgstr "北"
846
847	#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
848	#: ../src/printwx.cc:1058
849	#: n:116
850	msgid "Elevation on"
851	msgstr ""
852
853	#: ../src/printwx.cc:490
854	#: n:117
855	msgid "P&lan view"
856	msgstr ""
857
858	#: ../src/printwx.cc:492
859	#: n:285
860	msgid "&Elevation"
861	msgstr ""
862
863	#: ../src/gfxcore.cc:802
864	#: ../src/mainfrm.cc:167
865	#: n:118
866	msgid "Elevation"
867	msgstr ""
868
869	#. TRANSLATORS: Label used for "clino" in Aven when the view is
870	#. from directly above.
871	#: ../src/gfxcore.cc:714
872	#: n:432
873	msgid "Plan"
874	msgstr ""
875
876	#. TRANSLATORS: Label used for "clino" in Aven when the view is
877	#. from directly below.
878	#: ../src/gfxcore.cc:724
879	#: n:433
880	msgid "Kiwi Plan"
881	msgstr ""
882
883	#: ../src/cavern.c:352
884	#: n:120
885	msgid "Calculating statistics"
886	msgstr ""
887
888	#: ../src/readval.c:489
889	#: n:121
890	msgid "Expecting string field"
891	msgstr ""
892
893	#: ../src/cmdline.c:212
894	#: n:122
895	msgid "too few arguments"
896	msgstr "太少参数"
897
898	#: ../src/cmdline.c:219
899	#: n:123
900	msgid "too many arguments"
901	msgstr "的参数太多"
902
903	#: ../src/cmdline.c:178
904	#: ../src/cmdline.c:181
905	#: ../src/cmdline.c:185
906	#: n:124
907	msgid "FILE"
908	msgstr "文件"
909
910	#. TRANSLATORS: In French, Eric chose to use the terminology used by
911	#. toporobot: "sequence" for the English "traverse", which makes sense
912	#. (although toporobot actually uses this term to mean something more
913	#. specific). Feel free to follow this lead if you can't think of a better
914	#. term - these messages mostly indicate how processing is progressing.
915	#.
916	#. A trailing traverse is a dead end back to a junction.
917	#: ../src/netskel.c:177
918	#: n:125
919	msgid "Removing trailing traverses"
920	msgstr ""
921
922	#. TRANSLATORS: In French, Eric chose to use the terminology used by
923	#. toporobot: "sequence" for the English "traverse", which makes sense
924	#. (although toporobot actually uses this term to mean something more
925	#. specific). Feel free to follow this lead if you can't think of a better
926	#. term - these messages mostly indicate how processing is progressing.
927	#: ../src/netskel.c:236
928	#: n:126
929	msgid "Concatenating traverses"
930	msgstr ""
931
932	#. TRANSLATORS: In French, Eric chose to use the terminology used by
933	#. toporobot: "sequence" for the English "traverse", which makes sense
934	#. (although toporobot actually uses this term to mean something more
935	#. specific). Feel free to follow this lead if you can't think of a better
936	#. term - these messages mostly indicate how processing is progressing.
937	#: ../src/netskel.c:434
938	#: n:127
939	msgid "Calculating traverses"
940	msgstr ""
941
942	#. TRANSLATORS: In French, Eric chose to use the terminology used by
943	#. toporobot: "sequence" for the English "traverse", which makes sense
944	#. (although toporobot actually uses this term to mean something more
945	#. specific). Feel free to follow this lead if you can't think of a better
946	#. term - these messages mostly indicate how processing is progressing.
947	#.
948	#. A trailing traverse is a dead end back to a junction.
949	#: ../src/netskel.c:779
950	#: n:128
951	msgid "Calculating trailing traverses"
952	msgstr ""
953
954	#: ../src/network.c:82
955	#: n:129
956	msgid "Simplifying network"
957	msgstr ""
958
959	#: ../src/network.c:540
960	#: n:130
961	msgid "Calculating network"
962	msgstr ""
963
964	#: ../src/datain.c:1496
965	#: n:131
966	#, c-format
967	msgid "Found “%s”, expecting “F” or “B”"
968	msgstr ""
969
970	#: ../src/cavern.c:449
971	#: n:132
972	#, c-format
973	msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
974	msgstr ""
975
976	#: ../src/cavern.c:452
977	#: n:133
978	#, c-format
979	msgid "Total plan length of survey legs = %7.2fm"
980	msgstr ""
981
982	#: ../src/cavern.c:455
983	#: n:134
984	#, c-format
985	msgid "Total vertical length of survey legs = %7.2fm"
986	msgstr ""
987
988	#. TRANSLATORS: numbers are altitudes of highest and lowest stations
989	#: ../src/cavern.c:462
990	#: n:135
991	#, c-format
992	msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
993	msgstr ""
994
995	#. TRANSLATORS: c.f. previous message
996	#: ../src/cavern.c:464
997	#: n:136
998	#, c-format
999	msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1000	msgstr ""
1001
1002	#. TRANSLATORS: c.f. previous two messages
1003	#: ../src/cavern.c:466
1004	#: n:137
1005	#, c-format
1006	msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1007	msgstr ""
1008
1009	#: ../src/cavern.c:434
1010	#: n:138
1011	msgid "There is 1 loop."
1012	msgstr ""
1013
1014	#: ../src/cavern.c:436
1015	#: n:139
1016	#, c-format
1017	msgid "There are %ld loops."
1018	msgstr ""
1019
1020	#: ../src/cavern.c:374
1021	#: n:140
1022	#, c-format
1023	msgid "CPU time used %5.2fs"
1024	msgstr ""
1025
1026	#: ../src/cavern.c:377
1027	#: n:141
1028	#, c-format
1029	msgid "Time used %5.2fs"
1030	msgstr ""
1031
1032	#: ../src/cavern.c:379
1033	#: n:142
1034	msgid "Time used unavailable"
1035	msgstr ""
1036
1037	#: ../src/cavern.c:382
1038	#: n:143
1039	#, c-format
1040	msgid "Time used %5.2fs (%5.2fs CPU time)"
1041	msgstr ""
1042
1043	#: ../src/netskel.c:744
1044	#: n:145
1045	#, c-format
1046	msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1047	msgstr ""
1048
1049	#: ../src/netskel.c:747
1050	#: n:146
1051	#, c-format
1052	msgid "Error %6.2f%%"
1053	msgstr ""
1054
1055	#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1056	#. traverse has zero length, so error per metre is meaningless.
1057	#.
1058	#. There should be 4 spaces between "Error" and "N/A" so that it lines
1059	#. up with the numbers in the message above.
1060	#: ../src/netskel.c:754
1061	#: n:147
1062	msgid "Error N/A"
1063	msgstr ""
1064
1065	#. TRANSLATORS: description of --help option
1066	#: ../src/cmdline.c:138
1067	#: n:150
1068	msgid "display this help and exit"
1069	msgstr "显示该求助信息并退出"
1070
1071	#. TRANSLATORS: description of --verbose option
1072	#: ../src/cmdline.c:141
1073	#: n:151
1074	msgid "output version information and exit"
1075	msgstr "显示版本信息并退出"
1076
1077	#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1078	#: ../src/cmdline.c:170
1079	#: n:153
1080	msgid "OPTION"
1081	msgstr "选项"
1082
1083	#: ../src/mainfrm.cc:171
1084	#: ../src/printwx.cc:436
1085	#: ../src/printwx.cc:1095
1086	#: ../src/printwx.cc:1144
1087	#: n:154
1088	msgid "Scale"
1089	msgstr "比例尺"
1090
1091	#: ../src/cmdline.c:194
1092	#: n:157
1093	#, c-format
1094	msgid "Try “%s --help” for more information.\n"
1095	msgstr ""
1096
1097	#: ../src/avenprcore.cc:269
1098	#: n:166
1099	#, c-format
1100	msgid "Page %d of %d"
1101	msgstr "页 %d / %d"
1102
1103	#: ../src/avenprcore.cc:272
1104	#: ../src/printwx.cc:1577
1105	#: n:167
1106	#, c-format
1107	msgid "Survey “%s” Page %d (of %d) Processed on %s"
1108	msgstr ""
1109
1110	#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1111	#. something like "123°". The bearing is up the page.
1112	#: ../src/printwx.cc:1039
1113	#: n:168
1114	#, c-format
1115	msgid "Plan view, %s up page"
1116	msgstr ""
1117
1118	#. TRANSLATORS: This is used on printouts of elevations, with %s
1119	#. replaced by something like "123°". The bearing is the direction
1120	#. we’re looking.
1121	#: ../src/printwx.cc:1071
1122	#: n:169
1123	#, c-format
1124	msgid "Elevation facing %s"
1125	msgstr ""
1126
1127	#. TRANSLATORS: This is used on printouts of tilted elevations, with
1128	#. the first %s replaced by something like "123°", and the second by
1129	#. something like "-45°". The bearing is the direction we’re
1130	#. looking.
1131	#: ../src/printwx.cc:1078
1132	#: n:284
1133	#, c-format
1134	msgid "Elevation facing %s, tilted %s"
1135	msgstr ""
1136
1137	#. TRANSLATORS: This is used on printouts of extended elevations.
1138	#: ../src/printwx.cc:1087
1139	#: n:191
1140	msgid "Extended elevation"
1141	msgstr ""
1142
1143	#: ../src/cavern.c:420
1144	#: n:172
1145	msgid "Survey contains 1 survey station,"
1146	msgstr ""
1147
1148	#: ../src/cavern.c:422
1149	#: n:173
1150	#, c-format
1151	msgid "Survey contains %ld survey stations,"
1152	msgstr ""
1153
1154	#: ../src/cavern.c:426
1155	#: n:174
1156	msgid " joined by 1 leg."
1157	msgstr ""
1158
1159	#: ../src/cavern.c:428
1160	#: n:175
1161	#, c-format
1162	msgid " joined by %ld legs."
1163	msgstr ""
1164
1165	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1166	#: ../src/listpos.c:185
1167	#: n:176
1168	msgid "node"
1169	msgstr "节点"
1170
1171	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1172	#: ../src/listpos.c:187
1173	#: n:177
1174	msgid "nodes"
1175	msgstr "节点"
1176
1177	#. TRANSLATORS: "Connected component" in the graph theory sense - it
1178	#. means there are %ld bits of survey with no connections between them.
1179	#. This message is only used if there are more than 1.
1180	#: ../src/cavern.c:445
1181	#: n:178
1182	#, c-format
1183	msgid "Survey has %ld connected components."
1184	msgstr ""
1185
1186	#. TRANSLATORS: Label for button in aven’s cavern log window which
1187	#. allows the user to save the log to a file.
1188	#: ../src/cavernlog.cc:456
1189	#: n:446
1190	msgid "Save Log"
1191	msgstr ""
1192
1193	#. TRANSLATORS: Label for button in aven’s cavern log window which
1194	#. causes the survey data to be reprocessed.
1195	#: ../src/cavernlog.cc:463
1196	#: ../src/cavernlog.cc:474
1197	#: n:184
1198	msgid "Reprocess"
1199	msgstr ""
1200
1201	#: ../src/cmdline.c:242
1202	#: ../src/cmdline.c:261
1203	#: n:185
1204	#, c-format
1205	msgid "numeric argument “%s” out of range"
1206	msgstr ""
1207
1208	#: ../src/cmdline.c:244
1209	#: n:186
1210	#, c-format
1211	msgid "argument “%s” not an integer"
1212	msgstr ""
1213
1214	#: ../src/cmdline.c:263
1215	#: n:187
1216	#, c-format
1217	msgid "argument “%s” not a number"
1218	msgstr ""
1219
1220	#: ../src/commands.c:900
1221	#: n:188
1222	msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1223	msgstr ""
1224
1225	#: ../src/commands.c:903
1226	#: n:189
1227	msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1228	msgstr ""
1229
1230	#: ../src/listpos.c:82
1231	#: n:190
1232	#, c-format
1233	msgid "Station “%s” referred to by entrance or export but never used"
1234	msgstr ""
1235
1236	#: ../src/commands.c:646
1237	#: n:192
1238	msgid "No matching BEGIN"
1239	msgstr ""
1240
1241	#. TRANSLATORS: BEGIN <survey> and END <survey> should have the
1242	#. same <survey> if it’s given at all
1243	#: ../src/commands.c:674
1244	#: n:193
1245	msgid "Survey name doesn’t match BEGIN"
1246	msgstr ""
1247
1248	#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1249	#. END command omits it, e.g.:
1250	#.
1251	#. *begin entrance
1252	#. 1 2 10.00 178 -01
1253	#. *end <--[Message given here]
1254	#: ../src/commands.c:683
1255	#: n:194
1256	msgid "Survey name omitted from END"
1257	msgstr ""
1258
1259	#. TRANSLATORS: Heading line for .pos file. Please try to ensure the “,”s
1260	#. (or at least the columns) are in the same place
1261	#: ../src/3dtopos.c:112
1262	#: n:195
1263	msgid "( Easting, Northing, Altitude )"
1264	msgstr ""
1265
1266	#. TRANSLATORS: bpp is "Bits Per Pixel"
1267	#: ../src/aboutdlg.cc:181
1268	#: n:196
1269	#, c-format
1270	msgid "Display Depth: %d bpp"
1271	msgstr ""
1272
1273	#. TRANSLATORS: appended to previous message if the display is colour
1274	#: ../src/aboutdlg.cc:183
1275	#: n:197
1276	msgid " (colour)"
1277	msgstr ""
1278
1279	#: ../src/readval.c:512
1280	#: ../src/readval.c:522
1281	#: ../src/readval.c:530
1282	#: n:198
1283	#, c-format
1284	msgid "Expecting date, found “%s”"
1285	msgstr ""
1286
1287	#. TRANSLATORS: --help output for --survey option.
1288	#.
1289	#. "this" has been added to English translation
1290	#: ../src/3dtopos.c:50
1291	#: ../src/aven.cc:66
1292	#: ../src/cad3d.c:660
1293	#: ../src/diffpos.c:57
1294	#: ../src/dump3d.c:49
1295	#: ../src/extend.c:459
1296	#: n:199
1297	msgid "only load the sub-survey with this prefix"
1298	msgstr ""
1299
1300	#. TRANSLATORS: --help output for aven --print option
1301	#: ../src/aven.cc:68
1302	#: n:119
1303	msgid "print and exit (requires a 3d file)"
1304	msgstr ""
1305
1306	#. TRANSLATORS: --help output for cavern --percentage option
1307	#: ../src/cavern.c:125
1308	#: n:161
1309	msgid "display percentage progress"
1310	msgstr ""
1311
1312	#. TRANSLATORS: --help output for cavern --output option
1313	#: ../src/cavern.c:127
1314	#: n:162
1315	msgid "set location for output files"
1316	msgstr ""
1317
1318	#. TRANSLATORS: --help output for cavern --quiet option
1319	#: ../src/cavern.c:129
1320	#: n:163
1321	msgid "only show brief summary (-qq for errors only)"
1322	msgstr ""
1323
1324	#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1325	#: ../src/cavern.c:131
1326	#: n:164
1327	msgid "do not create .err file"
1328	msgstr ""
1329
1330	#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1331	#: ../src/cavern.c:133
1332	#: n:165
1333	msgid "turn warnings into errors"
1334	msgstr ""
1335
1336	#. TRANSLATORS: --help output for cavern --log option
1337	#: ../src/cavern.c:135
1338	#: n:170
1339	msgid "log output to .log file"
1340	msgstr ""
1341
1342	#. TRANSLATORS: --help output for cavern --3d-version option
1343	#: ../src/cavern.c:137
1344	#: n:171
1345	msgid "specify the 3d file format version to output"
1346	msgstr ""
1347
1348	#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1349	#. meaningless to say your tape is marked in "0 feet" (but you might
1350	#. measure distance by counting knots on a diving line, and tie them
1351	#. every "2 feet").
1352	#: ../src/commands.c:1417
1353	#: n:200
1354	msgid "*UNITS factor must be non-zero"
1355	msgstr ""
1356
1357	#: ../src/mainfrm.cc:1460
1358	#: n:202
1359	#, c-format
1360	msgid "No survey data in 3d file “%s”"
1361	msgstr ""
1362
1363	#: ../src/gfxcore.cc:704
1364	#: n:203
1365	msgid "Facing"
1366	msgstr "封面"
1367
1368	#. TRANSLATORS: for the title of the About box
1369	#: ../src/aboutdlg.cc:63
1370	#: n:205
1371	#, c-format
1372	msgid "About %s"
1373	msgstr "关于%s"
1374
1375	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1376	#. - it should be translated to the terminology that cavers using the
1377	#. language would use.
1378	#.
1379	#. File->Open dialog:
1380	#: ../src/mainfrm.cc:1966
1381	#: n:206
1382	msgid "Select a survey file to view"
1383	msgstr ""
1384
1385	#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
1386	#. file extension, so neither should be translated.
1387	#: ../src/mainfrm.cc:1943
1388	#: n:207
1389	msgid "Survex 3d files"
1390	msgstr "Survex 3d 文件"
1391
1392	#: ../src/mainfrm.cc:1958
1393	#: ../src/mainfrm.cc:2409
1394	#: ../src/printwx.cc:665
1395	#: n:208
1396	msgid "All files"
1397	msgstr "全部文件"
1398
1399	#. TRANSLATORS: Here "survey" is a "cave map" rather than
1400	#. list of questions - it should be translated to the
1401	#. terminology that cavers using the language would use.
1402	#: ../src/mainfrm.cc:1940
1403	#: n:229
1404	msgid "All survey files"
1405	msgstr ""
1406
1407	#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
1408	#. file extension, so neither should be translated.
1409	#: ../src/mainfrm.cc:1946
1410	#: n:329
1411	msgid "Survex svx files"
1412	msgstr "Survex svx 文件"
1413
1414	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
1415	#. surveying package, so should not be translated
1416	#: ../src/mainfrm.cc:1954
1417	#: n:330
1418	msgid "Compass DAT and MAK files"
1419	msgstr ""
1420
1421	#: ../src/printwx.cc:312
1422	#: n:411
1423	msgid "DXF files"
1424	msgstr "DXF 文件"
1425
1426	#: ../src/printwx.cc:313
1427	#: n:412
1428	msgid "EPS files"
1429	msgstr "EPS 文件"
1430
1431	#: ../src/printwx.cc:314
1432	#: n:413
1433	msgid "GPX files"
1434	msgstr "GPS 文件"
1435
1436	#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
1437	#. on a (usually large) sheet of paper using a pen mounted in a motorised
1438	#. mechanism.
1439	#: ../src/printwx.cc:318
1440	#: n:414
1441	msgid "HPGL for plotters"
1442	msgstr ""
1443
1444	#: ../src/printwx.cc:320
1445	#: n:444
1446	msgid "KML files"
1447	msgstr "KML 文件"
1448
1449	#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
1450	#. so should not be translated:
1451	#. http://www.fountainware.com/compass/
1452	#. http://www.psc-cavers.org/carto/
1453	#: ../src/printwx.cc:325
1454	#: n:415
1455	msgid "Compass PLT for use with Carto"
1456	msgstr ""
1457
1458	#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
1459	#. translated: http://www.skencil.org/
1460	#: ../src/printwx.cc:328
1461	#: n:416
1462	msgid "Skencil files"
1463	msgstr "Skencil 文件"
1464
1465	#: ../src/printwx.cc:329
1466	#: n:417
1467	msgid "SVG files"
1468	msgstr "SVG 文件"
1469
1470	#: ../src/printwx.cc:319
1471	#: n:445
1472	msgid "JSON files"
1473	msgstr ""
1474
1475	#. TRANSLATORS: Log files from running cavern (extension .log)
1476	#: ../src/cavernlog.cc:508
1477	#: n:447
1478	msgid "Log files"
1479	msgstr ""
1480
1481	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1482	#. - it should be translated to the terminology that cavers using the
1483	#. language would use.
1484	#.
1485	#. This string is used in the about box (summarising the purpose of aven).
1486	#: ../src/aboutdlg.cc:91
1487	#: n:209
1488	msgid "Survey visualisation tool"
1489	msgstr ""
1490
1491	#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
1492	#. some languages here:
1493	#. http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
1494	#: ../src/aboutdlg.cc:105
1495	#: n:219
1496	msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1497	msgstr ""
1498
1499	#. TRANSLATORS: Part of 3dtopos --help
1500	#: ../src/3dtopos.c:86
1501	#: n:217
1502	msgid "3D_FILE [POS_FILE]"
1503	msgstr ""
1504
1505	#. TRANSLATORS: Part of diffpos --help
1506	#: ../src/diffpos.c:265
1507	#: n:218
1508	msgid "FILE1 FILE2 [THRESHOLD]"
1509	msgstr ""
1510
1511	#. TRANSLATORS: Part of diffpos --help
1512	#: ../src/diffpos.c:267
1513	#: n:255
1514	#, c-format
1515	msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1516	msgstr ""
1517
1518	#. TRANSLATORS: Part of extend --help
1519	#: ../src/extend.c:481
1520	#: n:267
1521	msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1522	msgstr ""
1523
1524	#. TRANSLATORS: Part of sorterr --help
1525	#: ../src/sorterr.c:127
1526	#: n:268
1527	msgid "ERR_FILE [HOW_MANY]"
1528	msgstr ""
1529
1530	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1531	#. - it should be translated to the terminology that cavers using the
1532	#. language would use.
1533	#.
1534	#. Part of aven --help
1535	#: ../src/aven.cc:115
1536	#: ../src/aven.cc:139
1537	#: n:269
1538	msgid "[SURVEY_FILE]"
1539	msgstr ""
1540
1541	#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
1542	#. are surveys without date information. Try to keep this fairly short.
1543	#: ../src/gfxcore.cc:1048
1544	#: n:221
1545	msgid "Undated"
1546	msgstr "取消隐藏"
1547
1548	#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1549	#. which aren’t part of a loop and so have no error information. Try to keep
1550	#. this fairly short.
1551	#: ../src/gfxcore.cc:1073
1552	#: n:290
1553	msgid "Not in loop"
1554	msgstr ""
1555
1556	#. TRANSLATORS: error from:
1557	#.
1558	#. *data normal newline from to tape compass clino
1559	#: ../src/commands.c:1261
1560	#: n:222
1561	msgid "NEWLINE can’t be the first reading"
1562	msgstr ""
1563
1564	#. TRANSLATORS: error from:
1565	#.
1566	#. *data normal from to tape compass clino newline
1567	#: ../src/commands.c:1299
1568	#: n:223
1569	msgid "NEWLINE can’t be the last reading"
1570	msgstr ""
1571
1572	#. TRANSLATORS: Error given by something like:
1573	#.
1574	#. *data normal station tape compass clino
1575	#.
1576	#. ("station" signifies interleaved data).
1577	#: ../src/commands.c:1322
1578	#: n:224
1579	msgid "Interleaved readings, but no NEWLINE"
1580	msgstr ""
1581
1582	#. TRANSLATORS: caused by e.g.
1583	#.
1584	#. *data diving station newline depth tape compass
1585	#.
1586	#. ("depth" needs to occur before "newline").
1587	#: ../src/commands.c:1198
1588	#: n:225
1589	#, c-format
1590	msgid "Reading “%s” must occur before NEWLINE"
1591	msgstr ""
1592
1593	#. TRANSLATORS: e.g.
1594	#.
1595	#. *data normal from to tape newline compass clino
1596	#: ../src/commands.c:1251
1597	#: n:226
1598	msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1599	msgstr ""
1600
1601	#. TRANSLATORS: e.g.
1602	#.
1603	#. *calibrate tape compass 1 1
1604	#: ../src/commands.c:1455
1605	#: n:227
1606	msgid "Can’t calibrate angular and length quantities together"
1607	msgstr ""
1608
1609	#: ../src/commands.c:589
1610	#: n:397
1611	msgid "Bad *alias command"
1612	msgstr ""
1613
1614	#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1615	#. currently)
1616	#: ../src/log.cc:32
1617	#: n:228
1618	#, c-format
1619	msgid "%s Error Log"
1620	msgstr ""
1621
1622	#. TRANSLATORS: The text on the action button in the "Export" settings
1623	#. dialog
1624	#: ../src/printwx.cc:624
1625	#: n:230
1626	msgid "&Export…"
1627	msgstr ""
1628
1629	#. TRANSLATORS: "Rotation" menu. The accelerators must be different within
1630	#. this group. Tickable menu item which toggles auto rotation
1631	#: ../src/mainfrm.cc:828
1632	#: n:231
1633	msgid "Au&to-Rotate\tSpace"
1634	msgstr ""
1635
1636	#: ../src/mainfrm.cc:830
1637	#: n:232
1638	msgid "Speed &Up"
1639	msgstr ""
1640
1641	#: ../src/mainfrm.cc:831
1642	#: n:233
1643	msgid "Slow &Down"
1644	msgstr ""
1645
1646	#: ../src/mainfrm.cc:833
1647	#: n:234
1648	msgid "&Reverse Direction"
1649	msgstr "反向(&R)"
1650
1651	#: ../src/mainfrm.cc:835
1652	#: n:235
1653	msgid "Step Once &Anticlockwise"
1654	msgstr ""
1655
1656	#: ../src/mainfrm.cc:836
1657	#: n:236
1658	msgid "Step Once &Clockwise"
1659	msgstr ""
1660
1661	#. TRANSLATORS: View looking North
1662	#: ../src/gfxcore.cc:3262
1663	#: ../src/mainfrm.cc:839
1664	#: n:240
1665	msgid "View &North"
1666	msgstr ""
1667
1668	#. TRANSLATORS: View looking East
1669	#: ../src/gfxcore.cc:3264
1670	#: ../src/mainfrm.cc:840
1671	#: n:241
1672	msgid "View &East"
1673	msgstr ""
1674
1675	#. TRANSLATORS: View looking South
1676	#: ../src/gfxcore.cc:3266
1677	#: ../src/mainfrm.cc:841
1678	#: n:242
1679	msgid "View &South"
1680	msgstr ""
1681
1682	#. TRANSLATORS: View looking West
1683	#: ../src/gfxcore.cc:3268
1684	#: ../src/mainfrm.cc:842
1685	#: n:243
1686	msgid "View &West"
1687	msgstr ""
1688
1689	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1690	#. - it should be translated to the terminology that cavers using the
1691	#. language would use.
1692	#: ../src/mainfrm.cc:847
1693	#: n:244
1694	msgid "Shift Survey &Left"
1695	msgstr ""
1696
1697	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1698	#. - it should be translated to the terminology that cavers using the
1699	#. language would use.
1700	#: ../src/mainfrm.cc:851
1701	#: n:245
1702	msgid "Shift Survey &Right"
1703	msgstr ""
1704
1705	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1706	#. - it should be translated to the terminology that cavers using the
1707	#. language would use.
1708	#: ../src/mainfrm.cc:855
1709	#: n:246
1710	msgid "Shift Survey &Up"
1711	msgstr ""
1712
1713	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1714	#. - it should be translated to the terminology that cavers using the
1715	#. language would use.
1716	#: ../src/mainfrm.cc:859
1717	#: n:247
1718	msgid "Shift Survey &Down"
1719	msgstr ""
1720
1721	#: ../src/gfxcore.cc:3285
1722	#: ../src/mainfrm.cc:861
1723	#: n:248
1724	msgid "&Plan View"
1725	msgstr ""
1726
1727	#: ../src/gfxcore.cc:3286
1728	#: ../src/mainfrm.cc:862
1729	#: n:249
1730	msgid "Ele&vation"
1731	msgstr ""
1732
1733	#: ../src/mainfrm.cc:864
1734	#: n:250
1735	msgid "&Higher Viewpoint"
1736	msgstr ""
1737
1738	#: ../src/mainfrm.cc:865
1739	#: n:251
1740	msgid "L&ower Viewpoint"
1741	msgstr ""
1742
1743	#: ../src/mainfrm.cc:868
1744	#: n:252
1745	msgid "&Zoom In\t]"
1746	msgstr ""
1747
1748	#: ../src/mainfrm.cc:869
1749	#: n:253
1750	msgid "Zoo&m Out\t["
1751	msgstr ""
1752
1753	#: ../src/mainfrm.cc:871
1754	#: n:254
1755	msgid "Restore De&fault View"
1756	msgstr ""
1757
1758	#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1759	#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1760	#. the "what to print/export" dialog.
1761	#: ../src/printwx.cc:400
1762	#: n:283
1763	msgid "View"
1764	msgstr "查看"
1765
1766	#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1767	#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1768	#. "Elements" isn’t a good name for this but nothing better has yet come to
1769	#. mind!
1770	#: ../src/printwx.cc:405
1771	#: n:256
1772	msgid "Elements"
1773	msgstr "元素"
1774
1775	#: ../src/printwx.cc:411
1776	#: n:410
1777	msgid "Export format"
1778	msgstr "导出格式"
1779
1780	#: ../src/printwx.cc:460
1781	#: ../src/printwx.cc:837
1782	#: n:257
1783	#, c-format
1784	msgid "%d pages (%dx%d)"
1785	msgstr ""
1786
1787	#. TRANSLATORS: used in the scale drop down selector in the print
1788	#. dialog the implicit meaning is "choose a suitable scale to fit
1789	#. the plot on a single page", but we need something shorter
1790	#: ../src/printwx.cc:442
1791	#: ../src/printwx.cc:856
1792	#: n:258
1793	msgid "One page"
1794	msgstr ""
1795
1796	#: ../src/mainfrm.cc:163
1797	#: ../src/printwx.cc:473
1798	#: n:259
1799	msgid "Bearing"
1800	msgstr ""
1801
1802	#: ../src/printwx.cc:514
1803	#: n:260
1804	msgid "Station Names"
1805	msgstr ""
1806
1807	#: ../src/printwx.cc:510
1808	#: n:261
1809	msgid "Crosses"
1810	msgstr "格点"
1811
1812	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1813	#. "survey stations".
1814	#: ../src/printwx.cc:500
1815	#: n:262
1816	msgid "Underground Survey Legs"
1817	msgstr ""
1818
1819	#: ../src/printwx.cc:530
1820	#: n:393
1821	msgid "Cross-sections"
1822	msgstr ""
1823
1824	#: ../src/printwx.cc:535
1825	#: n:394
1826	msgid "Walls"
1827	msgstr ""
1828
1829	#: ../src/printwx.cc:539
1830	#: n:395
1831	msgid "Passages"
1832	msgstr ""
1833
1834	#: ../src/printwx.cc:543
1835	#: n:421
1836	msgid "Origin in centre"
1837	msgstr ""
1838
1839	#: ../src/printwx.cc:547
1840	#: n:422
1841	msgid "Full coordinates"
1842	msgstr ""
1843
1844	#. TRANSLATORS: Used in the print dialog:
1845	#: ../src/printwx.cc:480
1846	#: n:263
1847	msgid "Tilt angle"
1848	msgstr ""
1849
1850	#. TRANSLATORS: used in the print dialog - controls drawing lines
1851	#. around each page
1852	#: ../src/printwx.cc:555
1853	#: n:264
1854	msgid "Page Borders"
1855	msgstr ""
1856
1857	#. TRANSLATORS: As in the legend on a map. Used in the print dialog -
1858	#. controls drawing the box at the lower left with survey name, view
1859	#. angles, etc
1860	#: ../src/printwx.cc:566
1861	#: n:265
1862	msgid "Legend"
1863	msgstr ""
1864
1865	#. TRANSLATORS: will be used in the print dialog - check this to print
1866	#. blank pages (otherwise they’ll be skipped to save paper)
1867	#: ../src/printwx.cc:561
1868	#: n:266
1869	msgid "Blank Pages"
1870	msgstr ""
1871
1872	#. TRANSLATORS: Items in the "View" menu:
1873	#: ../src/mainfrm.cc:888
1874	#: n:270
1875	msgid "Station &Names\tCtrl+N"
1876	msgstr ""
1877
1878	#. TRANSLATORS: Toggles drawing of 3D passages
1879	#: ../src/mainfrm.cc:890
1880	#: n:346
1881	msgid "Passage &Tubes\tCtrl+T"
1882	msgstr ""
1883
1884	#: ../src/mainfrm.cc:891
1885	#: n:271
1886	msgid "&Crosses\tCtrl+X"
1887	msgstr "格点(&C)\tCtrl+X"
1888
1889	#: ../src/mainfrm.cc:892
1890	#: n:297
1891	msgid "&Grid\tCtrl+G"
1892	msgstr ""
1893
1894	#: ../src/mainfrm.cc:893
1895	#: n:318
1896	msgid "&Bounding Box\tCtrl+B"
1897	msgstr ""
1898
1899	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1900	#. "survey stations".
1901	#: ../src/mainfrm.cc:897
1902	#: n:272
1903	msgid "&Underground Survey Legs\tCtrl+L"
1904	msgstr ""
1905
1906	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1907	#. "survey stations".
1908	#: ../src/mainfrm.cc:900
1909	#: n:291
1910	msgid "&Surface Survey Legs\tCtrl+F"
1911	msgstr ""
1912
1913	#: ../src/mainfrm.cc:909
1914	#: n:273
1915	msgid "&Overlapping Names"
1916	msgstr ""
1917
1918	#: ../src/gfxcore.cc:3323
1919	#: ../src/mainfrm.cc:910
1920	#: n:292
1921	msgid "Colour by &Depth"
1922	msgstr ""
1923
1924	#: ../src/gfxcore.cc:3324
1925	#: ../src/mainfrm.cc:911
1926	#: n:293
1927	msgid "Colour by D&ate"
1928	msgstr ""
1929
1930	#: ../src/gfxcore.cc:3325
1931	#: ../src/mainfrm.cc:912
1932	#: n:289
1933	msgid "Colour by E&rror"
1934	msgstr ""
1935
1936	#: ../src/mainfrm.cc:914
1937	#: n:294
1938	msgid "Highlight &Entrances"
1939	msgstr ""
1940
1941	#: ../src/mainfrm.cc:915
1942	#: n:295
1943	msgid "Highlight &Fixed Points"
1944	msgstr ""
1945
1946	#: ../src/mainfrm.cc:916
1947	#: n:296
1948	msgid "Highlight E&xported Points"
1949	msgstr ""
1950
1951	#: ../src/printwx.cc:518
1952	#: n:418
1953	msgid "Entrances"
1954	msgstr ""
1955
1956	#: ../src/printwx.cc:522
1957	#: n:419
1958	msgid "Fixed Points"
1959	msgstr ""
1960
1961	#: ../src/printwx.cc:526
1962	#: n:420
1963	msgid "Exported Stations"
1964	msgstr ""
1965
1966	#: ../src/mainfrm.cc:921
1967	#: n:237
1968	msgid "&Perspective"
1969	msgstr ""
1970
1971	#: ../src/mainfrm.cc:923
1972	#: n:238
1973	msgid "Textured &Walls"
1974	msgstr ""
1975
1976	#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
1977	#. using that term instead if it gives a better translation which most
1978	#. users will understand.
1979	#: ../src/mainfrm.cc:927
1980	#: n:239
1981	msgid "Fade Distant Ob&jects"
1982	msgstr ""
1983
1984	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1985	#. "survey stations".
1986	#: ../src/mainfrm.cc:930
1987	#: n:298
1988	msgid "Smoot&hed Survey Legs"
1989	msgstr ""
1990
1991	#: ../src/mainfrm.cc:936
1992	#: ../src/mainfrm.cc:940
1993	#: n:356
1994	msgid "Full Screen &Mode\tF11"
1995	msgstr ""
1996
1997	#: ../src/mainfrm.cc:954
1998	#: n:274
1999	msgid "&Compass"
2000	msgstr "罗盘(&C)"
2001
2002	#: ../src/mainfrm.cc:955
2003	#: n:275
2004	msgid "C&linometer"
2005	msgstr ""
2006
2007	#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2008	#. corresponds to which depth, date, survey closure error, etc.
2009	#: ../src/mainfrm.cc:958
2010	#: n:276
2011	msgid "Colour &Key"
2012	msgstr ""
2013
2014	#: ../src/mainfrm.cc:959
2015	#: n:277
2016	msgid "&Scale Bar"
2017	msgstr "缩放栏(&S)"
2018
2019	#: ../src/mainfrm.cc:949
2020	#: n:280
2021	msgid "&Reverse Sense\tCtrl+R"
2022	msgstr ""
2023
2024	#: ../src/mainfrm.cc:919
2025	#: ../src/mainfrm.cc:951
2026	#: n:281
2027	msgid "&Cancel Measuring Line\tEscape"
2028	msgstr ""
2029
2030	#: ../src/mainfrm.cc:960
2031	#: n:299
2032	msgid "&Indicators"
2033	msgstr ""
2034
2035	#: ../src/z_getopt.c:697
2036	#: ../src/z_getopt.c:709
2037	#: n:300
2038	#, c-format
2039	msgid "%s: option “%s” is ambiguous\n"
2040	msgstr "%s：选项“%s”含义不明确\n"
2041
2042	#: ../src/z_getopt.c:1025
2043	#: ../src/z_getopt.c:1036
2044	#: n:301
2045	#, c-format
2046	msgid "%s: option “-W %s” is ambiguous\n"
2047	msgstr "%s：选项“-W %s”含义不明确\n"
2048
2049	#: ../src/z_getopt.c:753
2050	#: ../src/z_getopt.c:757
2051	#: n:302
2052	#, c-format
2053	msgid "%s: option “%c%s” doesn’t allow an argument\n"
2054	msgstr "%s：选项“%c%s”不接受参数\n"
2055
2056	#: ../src/z_getopt.c:742
2057	#: ../src/z_getopt.c:745
2058	#: n:303
2059	#, c-format
2060	msgid "%s: option “--%s” doesn’t allow an argument\n"
2061	msgstr "%s：选项“--%s”不接受参数\n"
2062
2063	#: ../src/z_getopt.c:1060
2064	#: ../src/z_getopt.c:1071
2065	#: n:304
2066	#, c-format
2067	msgid "%s: option “-W %s” doesn’t allow an argument\n"
2068	msgstr "%s：选项“-W %s”不接受参数\n"
2069
2070	#: ../src/z_getopt.c:792
2071	#: ../src/z_getopt.c:804
2072	#: ../src/z_getopt.c:1091
2073	#: ../src/z_getopt.c:1103
2074	#: n:305
2075	#, c-format
2076	msgid "%s: option “%s” requires an argument\n"
2077	msgstr "%s：参数“%s”需要参数\n"
2078
2079	#: ../src/z_getopt.c:962
2080	#: ../src/z_getopt.c:973
2081	#: ../src/z_getopt.c:1156
2082	#: ../src/z_getopt.c:1168
2083	#: n:306
2084	#, c-format
2085	msgid "%s: option requires an argument -- %c\n"
2086	msgstr "%s：选项需要一个参数 -- %c\n"
2087
2088	#: ../src/z_getopt.c:842
2089	#: ../src/z_getopt.c:845
2090	#: n:307
2091	#, c-format
2092	msgid "%s: unrecognized option “--%s”\n"
2093	msgstr "%s：无法识别的选项“--%s”\n"
2094
2095	#: ../src/z_getopt.c:853
2096	#: ../src/z_getopt.c:856
2097	#: n:308
2098	#, c-format
2099	msgid "%s: unrecognized option “%c%s”\n"
2100	msgstr "%s：无法识别的选项“%c%s”\n"
2101
2102	#: ../src/z_getopt.c:903
2103	#: ../src/z_getopt.c:906
2104	#: n:309
2105	#, c-format
2106	msgid "%s: illegal option -- %c\n"
2107	msgstr "%s：非法选项 -- %c\n"
2108
2109	#: ../src/z_getopt.c:912
2110	#: ../src/z_getopt.c:915
2111	#: n:310
2112	#, c-format
2113	msgid "%s: invalid option -- %c\n"
2114	msgstr "%s：选项无效 -- %c\n"
2115
2116	#: ../src/mainfrm.cc:874
2117	#: n:311
2118	msgid "&New Presentation"
2119	msgstr ""
2120
2121	#: ../src/mainfrm.cc:875
2122	#: n:312
2123	msgid "&Open Presentation…"
2124	msgstr ""
2125
2126	#: ../src/mainfrm.cc:876
2127	#: n:313
2128	msgid "&Save Presentation"
2129	msgstr ""
2130
2131	#: ../src/mainfrm.cc:877
2132	#: n:314
2133	msgid "Sa&ve Presentation As…"
2134	msgstr ""
2135
2136	#. TRANSLATORS: "Mark" as in "Mark this position"
2137	#: ../src/mainfrm.cc:880
2138	#: n:315
2139	msgid "&Mark"
2140	msgstr ""
2141
2142	#. TRANSLATORS: "Play" as in "Play back a recording"
2143	#: ../src/mainfrm.cc:882
2144	#: n:316
2145	msgid "Pla&y"
2146	msgstr "播放(&Y)"
2147
2148	#: ../src/mainfrm.cc:883
2149	#: n:317
2150	msgid "&Export as Movie…"
2151	msgstr ""
2152
2153	#: ../src/mainfrm.cc:2486
2154	#: n:331
2155	msgid "Export Movie"
2156	msgstr ""
2157
2158	#: ../src/cavernlog.cc:511
2159	#: ../src/mainfrm.cc:371
2160	#: n:319
2161	msgid "Select an output filename"
2162	msgstr "选择输出文件名"
2163
2164	#: ../src/mainfrm.cc:368
2165	#: ../src/mainfrm.cc:2408
2166	#: n:320
2167	msgid "Aven presentations"
2168	msgstr ""
2169
2170	#. TRANSLATORS: title of the save screenshot dialog
2171	#: ../src/mainfrm.cc:1994
2172	#: n:321
2173	msgid "Save Screenshot"
2174	msgstr "保存截图"
2175
2176	#: ../src/mainfrm.cc:2403
2177	#: ../src/mainfrm.cc:2406
2178	#: n:322
2179	msgid "Select a presentation to open"
2180	msgstr ""
2181
2182	#: ../src/mainfrm.cc:450
2183	#: n:323
2184	#, c-format
2185	msgid "Error in format of presentation file “%s”"
2186	msgstr ""
2187
2188	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2189	#. surveying package, so probably shouldn’t be translated
2190	#: ../src/mainfrm.cc:1950
2191	#: n:324
2192	msgid "Compass PLT files"
2193	msgstr ""
2194
2195	#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2196	#. package, so don’t translate it.
2197	#: ../src/mainfrm.cc:1957
2198	#: n:325
2199	msgid "CMAP XYZ files"
2200	msgstr ""
2201
2202	#. TRANSLATORS: title of message box
2203	#: ../src/mainfrm.cc:2057
2204	#: ../src/mainfrm.cc:2380
2205	#: ../src/mainfrm.cc:2397
2206	#: n:326
2207	msgid "Modified Presentation"
2208	msgstr ""
2209
2210	#. TRANSLATORS: and the question in that box
2211	#: ../src/mainfrm.cc:2055
2212	#: ../src/mainfrm.cc:2379
2213	#: ../src/mainfrm.cc:2396
2214	#: n:327
2215	msgid "The current presentation has been modified. Abandon unsaved changes?"
2216	msgstr ""
2217
2218	#: ../src/mainfrm.cc:2697
2219	#: ../src/mainfrm.cc:2708
2220	#: n:328
2221	msgid "No matches were found."
2222	msgstr "未找到匹配内容。"
2223
2224	#. TRANSLATORS: "Find stations" button tooltip
2225	#: ../src/mainfrm.cc:1035
2226	#: n:332
2227	msgid "Find"
2228	msgstr "查找"
2229
2230	#. TRANSLATORS: "Hide stations" button default tooltip
2231	#: ../src/mainfrm.cc:1037
2232	#: ../src/mainfrm.cc:2740
2233	#: n:333
2234	msgid "Hide"
2235	msgstr "隐藏"
2236
2237	#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2238	#: ../src/mainfrm.cc:2701
2239	#: n:334
2240	#, c-format
2241	msgid "Hide %d found stations"
2242	msgstr ""
2243
2244	#: ../src/mainfrm.cc:251
2245	#: ../src/mainfrm.cc:2145
2246	#: ../src/mainfrm.cc:2226
2247	#: ../src/mainfrm.cc:2278
2248	#: n:335
2249	msgid "Altitude"
2250	msgstr "海拔"
2251
2252	#. TRANSLATORS: error if you try to drag multiple files to the aven
2253	#. window
2254	#: ../src/mainfrm.cc:730
2255	#: n:336
2256	msgid "You may only view one 3d file at a time."
2257	msgstr ""
2258
2259	#: ../src/mainfrm.cc:961
2260	#: n:337
2261	msgid "&Side Panel"
2262	msgstr ""
2263
2264	#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2265	#. Easting)
2266	#: ../src/mainfrm.cc:2143
2267	#: ../src/mainfrm.cc:2165
2268	#: ../src/mainfrm.cc:2167
2269	#: ../src/mainfrm.cc:2277
2270	#: n:338
2271	msgid "%.2f E, %.2f N"
2272	msgstr "%.2f东%.2f北"
2273
2274	#. TRANSLATORS: Used in Aven:
2275	#. From <stationname>
2276	#. H: 123.45m V: 234.56m
2277	#. Dist: 456.78m Brg: 200
2278	#: ../src/mainfrm.cc:2185
2279	#: ../src/mainfrm.cc:2235
2280	#: ../src/mainfrm.cc:2297
2281	#: n:339
2282	#, c-format
2283	msgid "From %s"
2284	msgstr ""
2285
2286	#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2287	#: ../src/mainfrm.cc:2310
2288	#: n:340
2289	#, c-format
2290	msgid "H %.2f%s, V %.2f%s"
2291	msgstr ""
2292
2293	#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2294	#. in Compass bearing)
2295	#: ../src/mainfrm.cc:2322
2296	#: n:341
2297	#, c-format
2298	msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2299	msgstr ""
2300
2301	#. TRANSLATORS: tickable menu item in View menu.
2302	#.
2303	#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
2304	#: ../src/gfxcore.cc:3314
2305	#: ../src/gfxcore.cc:3332
2306	#: ../src/mainfrm.cc:963
2307	#: n:342
2308	msgid "&Metric"
2309	msgstr ""
2310
2311	#. TRANSLATORS: tickable menu item in View menu.
2312	#.
2313	#. Degrees are the angular measurement where there are 360 in a full
2314	#. circle.
2315	#: ../src/gfxcore.cc:3276
2316	#: ../src/gfxcore.cc:3294
2317	#: ../src/mainfrm.cc:964
2318	#: n:343
2319	msgid "&Degrees"
2320	msgstr ""
2321
2322	#. TRANSLATORS: tickable menu item in View menu.
2323	#.
2324	#. Show the tilt of the survey as a percentage gradient (100% = 45
2325	#. degrees = 50 grad).
2326	#: ../src/gfxcore.cc:3299
2327	#: ../src/mainfrm.cc:965
2328	#: n:430
2329	msgid "&Percent"
2330	msgstr "百分比(&P)"
2331
2332	#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2333	#. used e.g. "5km".
2334	#.
2335	#. If there should be a space between the number and this, include
2336	#. one in the translation.
2337	#: ../src/gfxcore.cc:1146
2338	#: ../src/printwx.cc:1136
2339	#: n:423
2340	msgid "km"
2341	msgstr "千米"
2342
2343	#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2344	#. e.g. "10m".
2345	#.
2346	#. If there should be a space between the number and this, include
2347	#. one in the translation.
2348	#: ../src/gfxcore.cc:1018
2349	#: ../src/gfxcore.cc:1153
2350	#: ../src/mainfrm.cc:2134
2351	#: ../src/mainfrm.cc:2201
2352	#: ../src/mainfrm.cc:2221
2353	#: ../src/mainfrm.cc:2270
2354	#: ../src/mainfrm.cc:2301
2355	#: ../src/printwx.cc:1138
2356	#: n:424
2357	msgid "m"
2358	msgstr "米"
2359
2360	#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2361	#. used e.g. "50cm".
2362	#.
2363	#. If there should be a space between the number and this, include
2364	#. one in the translation.
2365	#: ../src/gfxcore.cc:1161
2366	#: ../src/printwx.cc:1141
2367	#: n:425
2368	msgid "cm"
2369	msgstr "厘米"
2370
2371	#. TRANSLATORS: abbreviation for "miles" (unit of length,
2372	#. plural), used e.g. "2 miles".
2373	#.
2374	#. If there should be a space between the number and this,
2375	#. include one in the translation.
2376	#: ../src/gfxcore.cc:1174
2377	#: n:426
2378	msgid " miles"
2379	msgstr "英里"
2380
2381	#. TRANSLATORS: abbreviation for "mile" (unit of length,
2382	#. singular), used e.g. "1 mile".
2383	#.
2384	#. If there should be a space between the number and this,
2385	#. include one in the translation.
2386	#: ../src/gfxcore.cc:1181
2387	#: n:427
2388	msgid " mile"
2389	msgstr "英里"
2390
2391	#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2392	#. as "10ft".
2393	#.
2394	#. If there should be a space between the number and this, include
2395	#. one in the translation.
2396	#: ../src/gfxcore.cc:1018
2397	#: ../src/gfxcore.cc:1189
2398	#: ../src/mainfrm.cc:2139
2399	#: ../src/mainfrm.cc:2204
2400	#: ../src/mainfrm.cc:2224
2401	#: ../src/mainfrm.cc:2275
2402	#: ../src/mainfrm.cc:2306
2403	#: n:428
2404	msgid "ft"
2405	msgstr "英尺"
2406
2407	#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2408	#. e.g. as "6in".
2409	#.
2410	#. If there should be a space between the number and this, include
2411	#. one in the translation.
2412	#: ../src/gfxcore.cc:1197
2413	#: n:429
2414	msgid "in"
2415	msgstr "英寸"
2416
2417	#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2418	#: ../src/gfxcore.cc:3271
2419	#: n:387
2420	msgid "&Hide Compass"
2421	msgstr ""
2422
2423	#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2424	#: ../src/gfxcore.cc:3289
2425	#: n:384
2426	msgid "&Hide Clino"
2427	msgstr ""
2428
2429	#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2430	#: ../src/gfxcore.cc:3309
2431	#: n:385
2432	msgid "&Hide scale bar"
2433	msgstr ""
2434
2435	#. TRANSLATORS: Menu item which turns off the colour key.
2436	#. The "Colour Key" is the thing in aven showing which colour
2437	#. corresponds to which depth, date, survey closure error, etc.
2438	#: ../src/gfxcore.cc:3330
2439	#: n:386
2440	msgid "&Hide colour key"
2441	msgstr ""
2442
2443	#. TRANSLATORS: degree symbol - probably should be translated to
2444	#. itself.
2445	#: ../src/gfxcore.cc:693
2446	#: ../src/gfxcore.cc:768
2447	#: ../src/mainfrm.cc:2188
2448	#: ../src/mainfrm.cc:2314
2449	#: ../src/printwx.cc:90
2450	#: n:344
2451	msgid "°"
2452	msgstr "°"
2453
2454	#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2455	#. circle).
2456	#: ../src/gfxcore.cc:698
2457	#: ../src/gfxcore.cc:773
2458	#: n:76
2459	msgid "ᵍ"
2460	msgstr ""
2461
2462	#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2463	#. full circle). Try to make this as short as sensibly possible.
2464	#.
2465	#. E.g. in Italian and Spanish we use "g.cent." rather than
2466	#. "gradi quattrocentesimali"/"grados centesimales"
2467	#: ../src/mainfrm.cc:2196
2468	#: ../src/mainfrm.cc:2317
2469	#: n:345
2470	msgid "grad"
2471	msgstr "梯度"
2472
2473	#. TRANSLATORS: symbol for percentage gradient (100% = 45
2474	#. degrees = 50 grad).
2475	#: ../src/gfxcore.cc:759
2476	#: ../src/gfxcore.cc:777
2477	#: n:96
2478	msgid "%"
2479	msgstr ""
2480
2481	#. TRANSLATORS: infinity symbol - used for the percentage gradient on
2482	#. vertical angles.
2483	#: ../src/gfxcore.cc:753
2484	#: n:431
2485	msgid "∞"
2486	msgstr ""
2487
2488	#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2489	#. in Compass bearing)
2490	#: ../src/mainfrm.cc:2208
2491	#: n:374
2492	#, c-format
2493	msgid "%s: H %.2f%s, Brg %03d%s"
2494	msgstr ""
2495
2496	#. TRANSLATORS: "V" is short for "Vertical"
2497	#: ../src/mainfrm.cc:2241
2498	#: n:375
2499	#, c-format
2500	msgid "%s: V %.2f%s"
2501	msgstr ""
2502
2503	#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2504	#. tree hierarchy of survey station names
2505	#: ../src/mainfrm.cc:1085
2506	#: n:376
2507	msgid "Surveys"
2508	msgstr ""
2509
2510	#: ../src/mainfrm.cc:1086
2511	#: n:377
2512	msgid "Presentation"
2513	msgstr "演示文档"
2514
2515	#: ../src/mainfrm.cc:249
2516	#: n:378
2517	msgid "Easting"
2518	msgstr "向东"
2519
2520	#: ../src/mainfrm.cc:250
2521	#: n:379
2522	msgid "Northing"
2523	msgstr "向北"
2524
2525	#. TRANSLATORS: Aven menu items. An “&” goes before the letter of any
2526	#. accelerator key.
2527	#.
2528	#. The string "\t" separates the menu text and any accelerator key.
2529	#.
2530	#. "File" menu. The accelerators must be different within this group.
2531	#. c.f. 201, 380, 381.
2532	#: ../src/mainfrm.cc:799
2533	#: n:220
2534	msgid "&Open…\tCtrl+O"
2535	msgstr ""
2536
2537	#: ../src/mainfrm.cc:800
2538	#: n:144
2539	msgid "Show &Log"
2540	msgstr ""
2541
2542	#: ../src/mainfrm.cc:803
2543	#: n:380
2544	msgid "&Print…\tCtrl+P"
2545	msgstr "打印(&P)…\tCtrl+P"
2546
2547	#: ../src/mainfrm.cc:804
2548	#: n:381
2549	msgid "P&age Setup…"
2550	msgstr "页面设置(&a)…"
2551
2552	#. TRANSLATORS: In the "File" menu
2553	#: ../src/mainfrm.cc:807
2554	#: n:201
2555	msgid "&Screenshot…"
2556	msgstr ""
2557
2558	#: ../src/mainfrm.cc:808
2559	#: n:382
2560	msgid "&Export as…"
2561	msgstr ""
2562
2563	#. TRANSLATORS: Title of file dialog to choose name and type of exported
2564	#. file.
2565	#: ../src/printwx.cc:671
2566	#: n:401
2567	msgid "Export as:"
2568	msgstr ""
2569
2570	#. TRANSLATORS: Title of the export
2571	#. dialog
2572	#: ../src/printwx.cc:347
2573	#: n:383
2574	msgid "Export"
2575	msgstr "导出"
2576
2577	#. TRANSLATORS: for about box:
2578	#: ../src/aboutdlg.cc:142
2579	#: n:390
2580	msgid "System Information:"
2581	msgstr ""
2582
2583	#. TRANSLATORS: Title of the print preview dialog
2584	#: ../src/printwx.cc:708
2585	#: n:398
2586	msgid "Print Preview"
2587	msgstr "打印预览"
2588
2589	#. TRANSLATORS: Title of the print
2590	#. dialog
2591	#: ../src/printwx.cc:344
2592	#: n:399
2593	msgid "Print"
2594	msgstr "打印"
2595
2596	#: ../src/printwx.cc:619
2597	#: n:400
2598	msgid "&Print…"
2599	msgstr "打印(&P)"
2600
2601	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2602	#. "survey stations".
2603	#: ../src/printwx.cc:506
2604	#: n:403
2605	msgid "Sur&face Survey Legs"
2606	msgstr ""
2607
2608	#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2609	#: ../src/mainfrm.cc:136
2610	#: n:404
2611	msgid "Edit Waypoint"
2612	msgstr "编辑航点"
2613
2614	#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2615	#. in a presentation.
2616	#: ../src/mainfrm.cc:175
2617	#: n:278
2618	msgid " (unused in perspective view)"
2619	msgstr ""
2620
2621	#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2622	#. presentation.
2623	#: ../src/mainfrm.cc:182
2624	#: n:279
2625	msgid "Time: "
2626	msgstr "时间： "
2627
2628	#. TRANSLATORS: units+info after time field in dialog to edit a
2629	#. waypoint in a presentation.
2630	#: ../src/mainfrm.cc:186
2631	#: n:282
2632	msgid " secs (0 = auto; *6 = 6 times auto)"
2633	msgstr ""
2634
2635	#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2636	#. perhaps by "Survex" or other things in future).
2637	#: ../src/aven.cc:230
2638	#: n:405
2639	#, c-format
2640	msgid "This version of %s requires OpenGL to work, but it isn’t available."
2641	msgstr ""
2642
2643	#: ../src/readval.c:341
2644	#: n:392
2645	msgid "Separator in survey name"
2646	msgstr ""
2647
2648	#. TRANSLATORS: Used in place of the station name when talking about an
2649	#. anonymous station.
2650	#: ../src/labelinfo.h:82
2651	#: n:56
2652	msgid "anonymous station"
2653	msgstr ""
2654
2655	#: ../src/readval.c:124
2656	#: ../src/readval.c:139
2657	#: ../src/readval.c:156
2658	#: n:3
2659	msgid "Can't have a leg between two anonymous stations"
2660	msgstr ""
2661
2662	#: ../src/mainfrm.cc:906
2663	#: n:406
2664	msgid "Spla&y Legs"
2665	msgstr ""
2666
2667	#: ../src/mainfrm.cc:903
2668	#: n:407
2669	msgid "&Hide"
2670	msgstr "隐藏(&H)"
2671
2672	#: ../src/mainfrm.cc:904
2673	#: n:408
2674	msgid "&Fade"
2675	msgstr ""
2676
2677	#: ../src/mainfrm.cc:905
2678	#: n:409
2679	msgid "&Show"
2680	msgstr ""
2681
2682	#: ../src/extend.c:507
2683	#: n:105
2684	msgid "Reading in data - please wait…"
2685	msgstr ""
2686
2687	#. TRANSLATORS: for extend: the user specified breaking a loop or
2688	#. changing extend direction at this station, but we didn’t find it in
2689	#. the 3d file
2690	#: ../src/extend.c:263
2691	#: ../src/extend.c:281
2692	#: ../src/extend.c:326
2693	#: ../src/extend.c:368
2694	#: ../src/extend.c:410
2695	#: n:510
2696	#, c-format
2697	msgid "Failed to find station %s"
2698	msgstr ""
2699
2700	#. TRANSLATORS: for extend: the user specified breaking a loop or
2701	#. changing extend direction at this leg, but we didn’t find it in the
2702	#. 3d file
2703	#: ../src/extend.c:307
2704	#: ../src/extend.c:349
2705	#: ../src/extend.c:391
2706	#: ../src/extend.c:433
2707	#: n:511
2708	#, c-format
2709	msgid "Failed to find leg %s → %s"
2710	msgstr ""
2711
2712	#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
2713	#: ../src/extend.c:254
2714	#: n:512
2715	#, c-format
2716	msgid "Starting from station %s"
2717	msgstr ""
2718
2719	#. TRANSLATORS: for extend:
2720	#: ../src/extend.c:274
2721	#: n:513
2722	#, c-format
2723	msgid "Extending to the left from station %s"
2724	msgstr ""
2725
2726	#. TRANSLATORS: for extend:
2727	#: ../src/extend.c:319
2728	#: n:514
2729	#, c-format
2730	msgid "Extending to the right from station %s"
2731	msgstr ""
2732
2733	#. TRANSLATORS: for extend:
2734	#: ../src/extend.c:294
2735	#: n:515
2736	#, c-format
2737	msgid "Extending to the left from leg %s → %s"
2738	msgstr ""
2739
2740	#. TRANSLATORS: for extend:
2741	#: ../src/extend.c:339
2742	#: n:516
2743	#, c-format
2744	msgid "Extending to the right from leg %s → %s"
2745	msgstr ""
2746
2747	#. TRANSLATORS: for extend:
2748	#: ../src/extend.c:403
2749	#: n:517
2750	#, c-format
2751	msgid "Breaking survey loop at station %s"
2752	msgstr ""
2753
2754	#. TRANSLATORS: for extend:
2755	#: ../src/extend.c:423
2756	#: n:518
2757	#, c-format
2758	msgid "Breaking survey loop at leg %s → %s"
2759	msgstr ""
2760
2761	#. TRANSLATORS: for extend:
2762	#: ../src/extend.c:361
2763	#: n:519
2764	#, c-format
2765	msgid "Swapping extend direction from station %s"
2766	msgstr ""
2767
2768	#. TRANSLATORS: for extend:
2769	#: ../src/extend.c:381
2770	#: n:520
2771	#, c-format
2772	msgid "Swapping extend direction from leg %s → %s"
2773	msgstr ""
2774
2775	#. TRANSLATORS: for extend:
2776	#: ../src/extend.c:551
2777	#: n:521
2778	#, c-format
2779	msgid "Applying specfile: “%s”"
2780	msgstr ""
2781
2782	#. TRANSLATORS: for extend:
2783	#. Used to tell the user that a file is being written - %s is the filename
2784	#: ../src/extend.c:614
2785	#: n:522
2786	#, c-format
2787	msgid "Writing %s…"
2788	msgstr ""
2789
2790	#. TRANSLATORS: --help output for sorterr --horizontal option
2791	#: ../src/sorterr.c:53
2792	#: n:179
2793	msgid "sort by horizontal error factor"
2794	msgstr ""
2795
2796	#. TRANSLATORS: --help output for sorterr --vertical option
2797	#: ../src/sorterr.c:55
2798	#: n:180
2799	msgid "sort by vertical error factor"
2800	msgstr ""
2801
2802	#. TRANSLATORS: --help output for sorterr --percentage option
2803	#: ../src/sorterr.c:57
2804	#: n:181
2805	msgid "sort by percentage error"
2806	msgstr ""
2807
2808	#. TRANSLATORS: --help output for sorterr --per-leg option
2809	#: ../src/sorterr.c:59
2810	#: n:182
2811	msgid "sort by error per leg"
2812	msgstr ""
2813
2814	#. TRANSLATORS: --help output for sorterr --replace option
2815	#: ../src/sorterr.c:61
2816	#: n:183
2817	msgid "replace .err file with resorted version"
2818	msgstr ""
2819
2820	#: ../src/sorterr.c:81
2821	#: ../src/sorterr.c:98
2822	#: ../src/sorterr.c:170
2823	#: n:112
2824	msgid "Couldn’t parse .err file"
2825	msgstr ""
2826
2827	#. TRANSLATORS: for diffpos:
2828	#: ../src/diffpos.c:159
2829	#: n:500
2830	#, c-format
2831	msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2832	msgstr ""
2833
2834	#. TRANSLATORS: for diffpos:
2835	#: ../src/diffpos.c:196
2836	#: n:501
2837	#, c-format
2838	msgid "Added: %s"
2839	msgstr ""
2840
2841	#. TRANSLATORS: for diffpos:
2842	#: ../src/diffpos.c:219
2843	#: n:502
2844	#, c-format
2845	msgid "Deleted: %s"
2846	msgstr ""
2847
2848	#. TRANSLATORS: Program will exit shortly after printing this
2849	#: ../src/message.c:227
2850	#: n:90
2851	msgid "Abnormal termination"
2852	msgstr ""
2853
2854	#: ../src/message.c:228
2855	#: n:91
2856	msgid "Arithmetic error"
2857	msgstr ""
2858
2859	#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
2860	#. opcodes -- corrupted program?
2861	#: ../src/message.c:231
2862	#: n:92
2863	msgid "Illegal instruction"
2864	msgstr "非法指令"
2865
2866	#: ../src/message.c:232
2867	#: n:94
2868	msgid "Bad memory access"
2869	msgstr ""
2870
2871	#: ../src/message.c:233
2872	#: n:97
2873	msgid "Unknown signal received"
2874	msgstr ""
2875
2876	#. TRANSLATORS: e.g.
2877	#.
2878	#. *begin crawl
2879	#. 1 2 9.45 234 -01
2880	#. *end crawl
2881	#. *begin crawl # <- warning here
2882	#. 2 3 7.67 223 -03
2883	#. *end crawl
2884	#.
2885	#. If you're unsure what "deprecated" means, see:
2886	#. http://en.wikipedia.org/wiki/Deprecation
2887	#: ../src/commands.c:537
2888	#: n:29
2889	msgid "Reentering an existing survey is deprecated"
2890	msgstr ""
2891
2892	#: ../src/commands.c:538
2893	#: n:30
2894	msgid "Originally entered here"
2895	msgstr ""
2896
2897	#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
2898	#. deprecated, so this error would be generated by:
2899	#.
2900	#. *equate \foo.7 1
2901	#.
2902	#. If you're unsure what "deprecated" means, see:
2903	#. http://en.wikipedia.org/wiki/Deprecation
2904	#: ../src/commands.c:463
2905	#: ../src/readval.c:90
2906	#: ../src/readval.c:94
2907	#: n:25
2908	msgid "ROOT is deprecated"
2909	msgstr ""
2910
2911	#: ../src/avenprcore.cc:125
2912	#: n:82
2913	#, c-format
2914	msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
2915	msgstr ""
2916
2917	#: ../src/avenprcore.cc:120
2918	#: n:85
2919	#, c-format
2920	msgid "Parameter “%s” missing in printer configuration file"
2921	msgstr ""
2922
2923	#. TRANSLATORS: --help output for dump3d --rewind option
2924	#: ../src/dump3d.c:51
2925	#: n:204
2926	msgid "rewind file and read it a second time"
2927	msgstr ""
2928
2929	#: ../src/dump3d.c:52
2930	#: n:396
2931	msgid "show survey date information (if present)"
2932	msgstr ""
2933
2934	#: ../src/findentrances.cc:100
2935	#: ../src/gpx.cc:70
2936	#: ../src/kml.cc:69
2937	#: n:287
2938	#, c-format
2939	msgid "Failed to initialise input coordinate system “%s”"
2940	msgstr ""
2941
2942	#: ../src/findentrances.cc:103
2943	#: ../src/gpx.cc:75
2944	#: ../src/kml.cc:74
2945	#: n:288
2946	#, c-format
2947	msgid "Failed to initialise output coordinate system “%s”"
2948	msgstr ""
2949
2950	#: ../src/findentrances.cc:158
2951	#: n:388
2952	msgid "-d PROJ_DATUM 3D_FILE"
2953	msgstr ""
2954
2955	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2956	#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
2957	#. what the input datum is.
2958	#: ../src/findentrances.cc:149
2959	#: n:389
2960	msgid "input datum as string to pass to PROJ"
2961	msgstr ""
2962
2963	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2964	#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
2965	#. of the coordinate projection in use, the user must specify it here for
2966	#. export formats which need to know it (e.g. GPX).
2967	#: ../src/printwx.cc:580
2968	#: n:440
2969	msgid "Coordinate projection"
2970	msgstr ""
2971
2972	#: ../src/cad3d.c:661
2973	#: n:100
2974	msgid "do not generate station markers"
2975	msgstr ""
2976
2977	#: ../src/cad3d.c:662
2978	#: n:101
2979	msgid "do not generate station labels"
2980	msgstr ""
2981
2982	#: ../src/cad3d.c:663
2983	#: n:102
2984	msgid "do not generate survey legs"
2985	msgstr ""
2986
2987	#: ../src/cad3d.c:667
2988	#: n:103
2989	msgid "produce an elevation view"
2990	msgstr ""
2991
2992	#: ../src/cad3d.c:664
2993	#: n:148
2994	#, c-format
2995	msgid "generate grid (default %sm)"
2996	msgstr ""
2997
2998	#: ../src/cad3d.c:665
2999	#: n:149
3000	#, c-format
3001	msgid "station labels text height (default %s)"
3002	msgstr ""
3003
3004	#: ../src/cad3d.c:666
3005	#: n:152
3006	#, c-format
3007	msgid "station marker size (default %s)"
3008	msgstr ""
3009
3010	#: ../src/cad3d.c:668
3011	#: n:155
3012	#, c-format
3013	msgid "factor to scale down by (default %s)"
3014	msgstr ""
3015
3016	#: ../src/cad3d.c:669
3017	#: n:156
3018	msgid "produce DXF output"
3019	msgstr ""
3020
3021	#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
3022	#. translated.
3023	#: ../src/cad3d.c:672
3024	#: n:158
3025	msgid "produce Skencil output"
3026	msgstr ""
3027
3028	#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
3029	#. so should not be translated.
3030	#: ../src/cad3d.c:675
3031	#: n:159
3032	msgid "produce Compass PLT output for Carto"
3033	msgstr ""
3034
3035	#: ../src/cad3d.c:676
3036	#: n:160
3037	msgid "produce SVG output"
3038	msgstr ""
3039
3040	#, c-format
3041	#~ msgid "Error in format of font file “%s”"
3042	#~ msgstr ""
3043
3044	#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
3045	#. height values).
3046	#~ msgid "Select a terrain file to view"
3047	#~ msgstr ""
3048
3049	#~ msgid "Terrain files"
3050	#~ msgstr ""
3051
3052	#~ msgid "Open &Terrain…"
3053	#~ msgstr ""
3054
3055	#~ msgid "Solid Su&rface"
3056	#~ msgstr ""
3057
3058	#. TRANSLATORS: number of stations found matching search
3059	#, c-format
3060	#~ msgid "%d found"
3061	#~ msgstr ""
3062
3063	#: ../src/mainfrm.cc:944
3064	#: n:347
3065	#~ msgid "&Preferences…"
3066	#~ msgstr ""
3067
3068	#: n:348
3069	#~ msgid "Draw passage walls"
3070	#~ msgstr ""
3071
3072	#: n:349
3073	#~ msgid "Estimate LRUD readings based on heuristics"
3074	#~ msgstr ""
3075
3076	#: n:350
3077	#~ msgid "Mark survey stations with crosses"
3078	#~ msgstr ""
3079
3080	#: n:351
3081	#~ msgid "Highlight stations marked as entrances"
3082	#~ msgstr ""
3083
3084	#: n:352
3085	#~ msgid "Highlight stations marked as fixed points"
3086	#~ msgstr ""
3087
3088	#: n:353
3089	#~ msgid "Highlight stations which are exported"
3090	#~ msgstr ""
3091
3092	#: n:354
3093	#~ msgid "Mark survey stations with their names"
3094	#~ msgstr ""
3095
3096	#: n:355
3097	#~ msgid "Allow names to overlap on the display (faster)"
3098	#~ msgstr ""
3099
3100	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3101	#. "survey stations".
3102	#: n:357
3103	#~ msgid "Display underground survey legs"
3104	#~ msgstr ""
3105
3106	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3107	#. "survey stations".
3108	#: n:358
3109	#~ msgid "Display surface survey legs"
3110	#~ msgstr ""
3111
3112	#: n:359
3113	#~ msgid "Colour surface surveys by depth"
3114	#~ msgstr ""
3115
3116	#: n:360
3117	#~ msgid "Draw surface legs with dashed lines"
3118	#~ msgstr ""
3119
3120	#: n:361
3121	#~ msgid "Draw a grid"
3122	#~ msgstr ""
3123
3124	#: n:362
3125	#~ msgid "metric units"
3126	#~ msgstr ""
3127
3128	#. TRANSLATORS: Miles, Feet, Inches, etc. What they call "English units" in
3129	#. the USA (rather confusingly now that England has largely gone metric!)
3130	#: n:363
3131	#~ msgid "imperial units"
3132	#~ msgstr ""
3133
3134	#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
3135	#. full circle.
3136	#: n:364
3137	#~ msgid "degrees (°)"
3138	#~ msgstr ""
3139
3140	#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
3141	#. full circle.
3142	#: n:365
3143	#~ msgid "grads"
3144	#~ msgstr ""
3145
3146	#: n:366
3147	#~ msgid "Display measurements in"
3148	#~ msgstr ""
3149
3150	#: n:367
3151	#~ msgid "Display angles in"
3152	#~ msgstr ""
3153
3154	#. TRANSLATORS: reverses the sense of the mouse controls
3155	#: n:368
3156	#~ msgid "Reverse the sense of the controls"
3157	#~ msgstr ""
3158
3159	#: n:369
3160	#~ msgid "Display scale bar"
3161	#~ msgstr ""
3162
3163	#: n:370
3164	#~ msgid "Display depth bar"
3165	#~ msgstr ""
3166
3167	#: n:371
3168	#~ msgid "Display compass"
3169	#~ msgstr ""
3170
3171	#: n:372
3172	#~ msgid "Display clinometer"
3173	#~ msgstr ""
3174
3175	#: n:373
3176	#~ msgid "Display side panel"
3177	#~ msgstr ""

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format