source: git/lib/zh_CN.po@ cf0b8dc

msgid ""
msgstr ""
"Project-Id-Version: survex\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
"Last-Translator: Qingqing Li <Unknown>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_CN\n"

#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
#. accelerator key.  The accelerators must be different within this group
#: ../src/mainfrm.cc:955
#: n:210
msgid "&File"
msgstr "文件(&F)"

#: ../src/mainfrm.cc:956
#: n:211
msgid "&Rotation"
msgstr "旋转(&R)"

#: ../src/mainfrm.cc:957
#: n:212
msgid "&Orientation"
msgstr "方向(&O)"

#: ../src/mainfrm.cc:958
#: n:213
msgid "&View"
msgstr "查看(&V)"

#: ../src/mainfrm.cc:960
#: n:214
msgid "&Controls"
msgstr "控制(&C)"

#: ../src/mainfrm.cc:972
#: n:215
msgid "&Help"
msgstr "帮助(&H)"

#. TRANSLATORS: "Presentation" in the sense of a talk with a slideshow -
#. the items in this menu allow the user to animate between preset
#. views.
#: ../src/mainfrm.cc:965
#: n:216
msgid "&Presentation"
msgstr "演示文档(&P)"

#. TRANSLATORS: as in: Usage: cavern …
#: ../src/cmdline.c:167
#: n:49
msgid "Usage"
msgstr "使用"

#: ../src/gla-gl.cc:263
#: n:389
msgid "Out of memory"
msgstr "内存耗尽"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
#. was trying to allocate space for.
#: ../src/message.c:68
#: ../src/message.c:1104
#: n:24
#, c-format
msgid "Out of memory (couldn’t find %lu bytes)."
msgstr "内存耗尽（不足 %lu 字节）"

#. TRANSLATORS: %s will be replaced by the filename
#. that we were trying to read when we ran out of
#. memory.
#: ../src/gfxcore.cc:4620
#: n:2
#, c-format
msgid "Out of memory trying to read file “%s”"
msgstr "试图读取文件“%s”时内存不足"

#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
#. greater" if that gives a more natural translation.  It's
#. technically not quite right when there are parallel active release
#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
#. seems unlikely to confuse users.  "Survex" is the name of the
#. software, so should not be translated.
#.
#. Here "survey" is a "cave map" rather than list of questions - it should be
#. translated to the terminology that cavers using the language would use.
#: ../src/commands.c:2841
#: n:38
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "处理此测量数据需要Survex %s 或以上版本。"

#. TRANSLATORS: Indicates a informational message e.g.:
#. "spoon.svx:12: info: Declination: [...]"
#: ../src/cavernlog.cc:531
#: ../src/message.c:1147
#: ../src/netartic.c:358
#: n:485
msgid "info"
msgstr "信息"

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#: ../src/aven.cc:476
#: ../src/cavernlog.cc:532
#: ../src/message.c:1152
#: n:106
msgid "warning"
msgstr "警告"

#. TRANSLATORS: Indicates an error message e.g.:
#. "spoon.svx:13:4: error: Field may not be omitted"
#: ../src/cavernlog.cc:533
#: ../src/message.c:1157
#: ../src/survexport.cc:469
#: n:93
msgid "error"
msgstr "错误"

#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
#. by the line number in that file.  Your translation should also contain
#. %s:%u so that automatic parsing of error messages to determine the file
#. and line number still works.
#: ../src/datain.c:157
#: n:44
#, c-format
msgid "In file included from %s:%u:\n"
msgstr "在文件中包括 %s:%u:\n"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. https://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:835
#: n:109
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix已弃用 - 请改用*begin和*end"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/readval.c:201
#: n:110
#, c-format
msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "站名中不允许使用字符“%c”（使用 *SET NAMES 设置允许使用的字符）"

#: ../src/readval.c:650
#: ../src/readval.c:690
#: n:114
msgid "Field may not be omitted"
msgstr "字段不能省略"

#: ../src/datain.c:4746
#: ../src/datain.c:4784
#: ../src/datain.c:4894
#: ../src/datain.c:4933
#: ../src/datain.c:4976
#: ../src/datain.c:5026
#: ../src/datain.c:5068
#: ../src/datain.c:5114
#: ../src/datain.c:5128
#: ../src/datain.c:5417
#: ../src/readval.c:652
#: ../src/readval.c:795
#: ../src/readval.c:828
#: n:9
#, c-format
msgid "Expecting numeric field, found “%s”"
msgstr "需要数字字段，找到“%s”"

#. TRANSLATORS: The first %d will be replaced by the (inclusive) lower
#. bound and the second by the (inclusive) upper bound, for example:
#. Expecting integer in range -60 to 60
#: ../src/readval.c:855
#: n:489
#, c-format
msgid "Expecting integer in range %d to %d"
msgstr ""

#: ../src/commands.c:2336
#: n:10
#, c-format
msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
msgstr "找到“%s”，需要“PRESERVE”、“TOUPPER”、“TOLOWER”"

#: ../src/debug.h:47
#: ../src/debug.h:51
#: n:11
msgid "Bug in program detected! Please report this to the authors"
msgstr "检测到程序错误！请将此报告给作者"

#: ../src/commands.c:3150
#: ../src/datain.c:2142
#: ../src/datain.c:2154
#: ../src/datain.c:2357
#: ../src/datain.c:2863
#: ../src/datain.c:3355
#: ../src/extend.c:462
#: n:12
#, c-format
msgid "Unknown command “%s”"
msgstr "未知的命令 “%s”"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netbits.c:434
#: n:13
#, c-format
msgid "Station “%s” equated to itself"
msgstr "站“%s”等同于它自身"

#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
#. survey stations.
#: ../src/datain.c:4032
#: n:14
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "除了垂直测量段，方位数据不可省略"

#: ../src/datain.c:5201
#: ../src/datain.c:5329
#: n:94
msgid "Tape reading may not be omitted"
msgstr "距离数据不可胜路"

#: ../src/commands.c:2379
#: ../src/datain.c:481
#: ../src/datain.c:2581
#: ../src/datain.c:2839
#: ../src/datain.c:4430
#: ../src/extend.c:467
#: n:15
msgid "End of line not blank"
msgstr "行尾不为空"

#: ../src/commands.c:369
#: n:74
msgid "No blank after token"
msgstr ""

#: ../src/cavern.c:415
#: n:16
#, c-format
msgid "There were %d warning(s)."
msgstr "有 %d 条警告。"

#. TRANSLATORS: %s is replaced by the command we attempted to run.
#: ../src/cavernlog.cc:418
#: ../src/cavernlog.cc:470
#: ../src/mainfrm.cc:1624
#: n:17
#, c-format
msgid "Couldn’t run external command: “%s”"
msgstr "命令 “%s” 执行失败"

#: ../src/datain.c:135
#: ../src/datain.c:143
#: ../src/datain.c:177
#: ../src/datain.c:206
#: ../src/datain.c:216
#: ../src/datain.c:232
#: ../src/datain.c:3163
#: ../src/datain.c:3515
#: ../src/extend.c:696
#: ../src/sorterr.c:77
#: ../src/sorterr.c:94
#: ../src/sorterr.c:237
#: n:18
msgid "Error reading file"
msgstr "读取文件时发生错误"

#: ../src/message.c:1180
#: n:19
msgid "Too many errors - giving up"
msgstr "错误太多 - 放弃"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. https://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:2126
#: n:20
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "不推荐*DEFAULT - 使用带DEFAULT参数的*CALIBRATE/DATA/SD/UNITS代替"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
#. (a weight on a string).  So the problem here is that the leg is
#. vertical, so a compass reading has no meaning!
#: ../src/datain.c:4002
#: n:21
msgid "Compass reading given on plumbed leg"
msgstr "垂直测量段上的罗盘读数"

#. TRANSLATORS: %s and %s are replaced with e.g. BEGIN and END
#. or END and BEGIN or #[ and #]
#: ../src/commands.c:1068
#: ../src/datain.c:2455
#: ../src/datain.c:3424
#: n:23
#, c-format
msgid "%s with no matching %s in this file"
msgstr "此文件中%s没有匹配的%s"

#. TRANSLATORS: A station must be exported out of each level it is in, so
#. this would give "Station “\outer.inner.1” not exported from survey
#. “\outer”)":
#.
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#.
#. Here "survey" is a "cave map" rather than list of questions - it should be
#. translated to the terminology that cavers using the language would use.
#: ../src/commands.c:1458
#: ../src/commands.c:1460
#: ../src/listpos.c:123
#: ../src/readval.c:341
#: ../src/readval.c:344
#: n:26
#, c-format
msgid "Station “%s” not exported from survey “%s”"
msgstr "站“%s”未从测量“%s”中导出"

#. TRANSLATORS: This error occurs if there's an attempt to
#. export a station from a survey which doesn't actually
#. exist.
#.
#. Here "survey" is a "cave map" rather than list of
#. questions - it should be translated to the terminology
#. that cavers using the language would use.
#: ../src/listpos.c:133
#: n:286
#, c-format
msgid "Reference to station “%s” from non-existent survey “%s”"
msgstr "站“%s”引用自不存在的测量“%s”"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#.
#. Here "survey" is a "cave map" rather than list of questions - it should be
#. translated to the terminology that cavers using the language would use.
#: ../src/readval.c:291
#: ../src/readval.c:315
#: n:27
#, c-format
msgid "“%s” can’t be both a station and a survey"
msgstr "“%s”不能既是一个测站又是一个测量"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/extend.c:269
#: ../src/extend.c:288
#: ../src/extend.c:334
#: ../src/extend.c:377
#: ../src/extend.c:420
#: ../src/readval.c:197
#: ../src/readval.c:458
#: ../src/readval.c:465
#: n:28
msgid "Expecting station name"
msgstr "需要站名"

#: ../src/commands.c:2751
#: n:31
#, c-format
msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
msgstr "找到“%s”，需要“EQUATES”、“EXPORTS”或“PLUMBS”"

#: ../src/commands.c:2757
#: n:32
#, c-format
msgid "Found “%s”, expecting “ON” or “OFF”"
msgstr "找到“%s”，需要“ON”或“OFF”"

#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
#. translated.
#.
#. Here "station" is a survey station, not a train station.
#: ../src/commands.c:1417
#: n:33
msgid "Only one station in EQUATE command"
msgstr "EQUATE命令中只有一个站"

#. TRANSLATORS: A "quantity" is something measured like "LENGTH",
#. "BEARING", "ALTITUDE", etc.
#: ../src/commands.c:642
#: n:34
#, c-format
msgid "Unknown quantity “%s”"
msgstr "未知量“%s”"

#: ../src/commands.c:541
#: n:35
#, c-format
msgid "Unknown units “%s”"
msgstr "未知单位“%s”"

#: ../src/commands.c:2297
#: n:532
#, c-format
msgid "Unknown team role “%s”"
msgstr ""

#: ../src/commands.c:2195
#: n:536
#, c-format
msgid "Unknown instrument type “%s”"
msgstr ""

#. TRANSLATORS: Survex has long misdefined "mils" as an alias for
#. "grads", of which there are 400 in a circle.  There are several
#. definitions of "mils" with a circle containing 2000π SI milliradians,
#. 6400 NATO mils, 6000 Warsaw Pact mils, and 6300 Swedish streck, and
#. they aren't in common use by cave surveyors, so we now just warn if
#. mils are used.  Here “grads” should not be translated as it shows
#. what cavern is assuming should be written in the .svx file instead.
#: ../src/commands.c:580
#: n:479
#, c-format
msgid "Units “%s” are deprecated, assuming “grads” - see manual for details"
msgstr "单位“%s”已弃用，假定为“grads”-有关详细信息，请参阅手册"

#: ../src/commands.c:2559
#: ../src/commands.c:2638
#: n:434
msgid "Unknown coordinate system"
msgstr "未知坐标系"

#: ../src/commands.c:2667
#: ../src/commands.c:2708
#: n:443
#, c-format
msgid "Invalid coordinate system: %s"
msgstr "无效坐标系：%s"

#: ../src/commands.c:2646
#: ../src/commands.c:2678
#: n:435
msgid "Coordinate system unsuitable for output"
msgstr "坐标系不适合输出"

#: ../src/commands.c:983
#: ../src/commands.c:1236
#: ../src/datain.c:2693
#: ../src/datain.c:3765
#: n:436
#, c-format
msgid "Failed to convert coordinates: %s"
msgstr "转换坐标失败：%s"

#: ../src/commands.c:1243
#: n:437
msgid "The input projection is set but the output projection isn't"
msgstr "设置了输入投影，但未设置输出投影"

#: ../src/commands.c:1245
#: n:438
msgid "The output projection is set but the input projection isn't"
msgstr "设置了输出投影，但未设置输入投影"

#: ../src/commands.c:1171
#: n:439
msgid "Coordinates can't be omitted when coordinate system has been specified"
msgstr "指定坐标系后，坐标不能省略"

#. TRANSLATORS: %s is replaced by the command that requires it, e.g.
#. *DECLINATION AUTO
#: ../src/commands.c:2090
#: ../src/datain.c:3803
#: n:301
#, c-format
msgid "Input coordinate system must be specified for “%s”"
msgstr "必须为“%s”指定输入坐标系"

#: ../src/datain.c:2705
#: ../src/datain.c:3785
#: n:488
msgid "Output coordinate system not set"
msgstr ""

#: ../src/datain.c:3287
#: n:503
#, c-format
msgid "Datum “%s” not supported"
msgstr ""

#: ../src/commands.c:2082
#: n:309
msgid "Expected number or “AUTO”"
msgstr "需要数字或“AUTO”"

#: ../src/datain.c:3825
#: n:304
msgid "No survey date specified - using 0 for magnetic declination"
msgstr "未指定测量日期-使用0作为磁偏角"

#. TRANSLATORS: This message gives information about the range of
#. declination values and the grid convergence value calculated for
#. each "*declination auto ..." command.
#.
#. The first %s will be replaced by the declination range (or single
#. value), and %.1f%s by the grid convergence angle.
#: ../src/commands.c:937
#: n:484
#, c-format
msgid "Declination: %s, grid convergence: %.1f%s"
msgstr ""

#. TRANSLATORS: Cavern computes the grid convergence at the
#. representative location(s) specified by the
#. `*declination auto` command(s).  The convergence values
#. for the most N, S, E and W survey stations with legs
#. attached are also computed and the range of these values
#. is reported in this message.  It's approximate because the
#. min or max convergence could actually be beyond this range
#. but it's unlikely to be very wrong.
#.
#. Each %.1f%s will be replaced with a convergence angle (e.g.
#. 0.9°) and the following %s with the station name where that
#. convergence angle was computed.
#: ../src/cavern.c:505
#: n:531
#, c-format
msgid "Approximate full range of grid convergence: %.1f%s at %s to %.1f%s at %s\n"
msgstr ""

#. TRANSLATORS: Used when a BEGIN command has no survey, but the
#. END command does, e.g.:
#.
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:1099
#: n:36
msgid "Matching BEGIN command has no survey name"
msgstr "匹配的BEGIN命令没有测量名称"

#. TRANSLATORS: Note: In English you talk about the *units* of a single
#. measurement, but the correct term in other languages may be singular.
#: ../src/commands.c:570
#: n:37
#, c-format
msgid "Invalid units “%s” for quantity"
msgstr "量的单位“%s”无效"

#: ../src/commands.c:634
#: n:39
#, c-format
msgid "Unknown instrument “%s”"
msgstr "未知工具“%s”"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
#. translate
#: ../src/commands.c:2022
#: n:40
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "DECLINATION的比例因子必须为1.0"

#. TRANSLATORS: If the scale factor for an instrument is zero, then any
#. reading would be mapped to zero, which doesn't make sense.
#: ../src/commands.c:2030
#: n:391
msgid "Scale factor must be non-zero"
msgstr "比例因子必须为非零"

#: ../src/commands.c:2146
#: n:41
#, c-format
msgid "Unknown setting “%s”"
msgstr "未知设置“%s”"

#: ../src/commands.c:678
#: n:42
#, c-format
msgid "Unknown character class “%s”"
msgstr "未知字符类“%s”"

#: ../src/extend.c:706
#: ../src/netskel.c:93
#: n:43
msgid "No survey data"
msgstr "无测量数据"

#: ../src/filename.c:80
#: n:5
#, c-format
msgid "Filename “%s” refers to directory"
msgstr "文件名“%s”引用了目录"

#. TRANSLATORS: At the end of processing (or if a *SOLVE command is used)
#. cavern will issue this warning if there are any sections of the survey
#. network which are hanging.
#: ../src/netartic.c:342
#: n:45
msgid "Survey not all connected to fixed stations"
msgstr "测量并非全部连接到固定站"

#: ../src/commands.c:1336
#: ../src/datain.c:958
#: ../src/datain.c:2726
#: n:46
msgid "Station already fixed or equated to a fixed point"
msgstr "站已经固定或等同到一个固定点"

#: ../src/commands.c:1341
#: ../src/datain.c:963
#: ../src/datain.c:2730
#: n:493
msgid "Previously fixed or equated here"
msgstr ""

#: ../src/cavern.c:312
#: ../src/filename.c:83
#: ../src/gfxcore.cc:4234
#: n:3
#, c-format
msgid "Failed to open output file “%s”"
msgstr "无法打开输出文件“%s”"

#: ../src/commands.c:1252
#: ../src/commands.c:1266
#: ../src/commands.c:1278
#: ../src/commands.c:2202
#: n:48
msgid "Standard deviation must be positive"
msgstr "标准偏差必须是正数"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#.
#. %s is replaced by the name of the station.
#: ../src/netbits.c:327
#: n:50
#, c-format
msgid "Survey leg with same station (“%s”) at both ends - typing error?"
msgstr "测量段的两端有同一个站(“%s”)—输入错误?"

#. TRANSLATORS: %.f%s will be replaced with a right angle in the
#. units currently in use, e.g. "90°" or "100ᵍ".  And "absolute
#. value" means the reading ignoring the sign (so it might be
#. < -90° or > 90°.
#: ../src/datain.c:3924
#: ../src/datain.c:3937
#: n:51
#, c-format
msgid "Clino reading over %.f%s (absolute value)"
msgstr "倾角读数超过 %.f%s（绝对值）"

#: ../src/netbits.c:449
#: n:52
#, c-format
msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
msgstr "尝试等同两个不相等的固定站“%s”和“%s”"

#. TRANSLATORS: "equal" as in:
#.
#. *fix a 1 2 3
#. *fix b 1 2 3
#. *equate a b
#: ../src/netbits.c:460
#: n:53
#, c-format
msgid "Equating two equal fixed points: “%s” and “%s”"
msgstr "等同两个相等的固定点：“%s”和“%s”"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:1191
#: n:54
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "FIX命令没有坐标—固定在 (0,0,0)"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:1339
#: ../src/datain.c:960
#: ../src/datain.c:2728
#: n:55
msgid "Station already fixed at the same coordinates"
msgstr "站已经固定在同一坐标"

#. TRANSLATORS: Emitted after second and subsequent "FIX" command
#. with no coordinates.
#: ../src/commands.c:1187
#: n:441
#, c-format
msgid "Already had FIX command with no coordinates for station “%s”"
msgstr "站“%s”已经有FIX命令但没有坐标"

#: ../src/commands.c:2435
#: n:442
#, c-format
msgid "Station “%s” fixed before CS command first used"
msgstr "在首次使用CS命令前，站“%s”已固定"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
#. <SURVEY>, so this would generate this error:
#.
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:3166
#: n:57
msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
msgstr "*EXPORT必须紧跟着“*BEGIN <SURVEY>”"

#. TRANSLATORS: %d will be replaced by the assumed year, e.g. 1918
#: ../src/commands.c:2873
#: ../src/commands.c:2948
#: ../src/readval.c:978
#: n:76
#, c-format
msgid "Assuming 2 digit year is %d"
msgstr "假设两位数年份为%d"

#: ../src/commands.c:2937
#: n:158
#, c-format
msgid "Interpreting as an ISO-format date - use “*date surveyed %d-%02d” to suppress this warning, or “*date %d %d” if you wanted a date range"
msgstr ""

#: ../src/commands.c:2877
#: ../src/commands.c:2951
#: ../src/readval.c:984
#: n:58
msgid "Invalid year (< 1900 or > 2078)"
msgstr "无效年份（<1900 或 >2078）"

#: ../src/commands.c:2346
#: ../src/commands.c:2349
#: ../src/commands.c:2357
#: ../src/commands.c:2360
#: n:534
msgid "Invalid year"
msgstr "无效年份"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20
#. degrees
#: ../src/datain.c:3624
#: ../src/datain.c:3633
#: ../src/readval.c:722
#: n:59
msgid "Suspicious compass reading"
msgstr "可疑的罗盘读数"

#: ../src/datain.c:4753
#: ../src/datain.c:4902
#: n:60
msgid "Negative tape reading"
msgstr "负的皮尺读数"

#: ../src/commands.c:1176
#: n:61
msgid "Same station fixed twice with no coordinates"
msgstr "同一个站点固定两次，无坐标"

#. TRANSLATORS: This means that the data fed in said this.
#.
#. It could be a gross error (e.g. the decimal point is missing from the
#. depth gauge reading) or it could just be due to random error on a near
#. vertical leg
#: ../src/datain.c:4208
#: n:62
msgid "Tape reading is less than change in depth"
msgstr "皮尺读数小于深度变化"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. style.  Neither "style" nor "reading" is a keyword in the program.
#.
#. This error complains about a "DEPTH" gauge reading in "NORMAL"
#. style, for example.
#: ../src/commands.c:1683
#: ../src/commands.c:1705
#: n:63
#, c-format
msgid "Reading “%s” not allowed in data style “%s”"
msgstr "不允许读取“%s”为“%s”数据样式"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1886
#: n:64
#, c-format
msgid "Too few readings for data style “%s”"
msgstr "数据样式“%s”的读数太少"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#: ../src/commands.c:1653
#: ../src/datain.c:2103
#: n:65
#, c-format
msgid "Data style “%s” unknown"
msgstr "未知的数据样式“%s”"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#.
#. Exporting a station twice gives this error:
#.
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:1509
#: n:66
#, c-format
msgid "Station “%s” already exported"
msgstr "站“%s”已导出"

#. TRANSLATORS: complains about a situation like trying to define
#. two from stations per leg
#: ../src/commands.c:1730
#: n:67
#, c-format
msgid "Duplicate reading “%s”"
msgstr "重复读取“%s”"

#: ../src/commands.c:2902
#: n:416
#, c-format
msgid "Duplicate date type “%s”"
msgstr ""

#: ../src/commands.c:1368
#: n:68
#, c-format
msgid "FLAG “%s” unknown"
msgstr "未知的标志“%s”"

#: ../src/readval.c:890
#: n:69
msgid "Missing \""
msgstr "已丢失 \""

#. TRANSLATORS: Here "station" is a survey station, not a train
#. station.
#: ../src/listpos.c:145
#: n:70
#, c-format
msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
msgstr "站“%s”只引用了一次，并且有明确的测量名称—输入错误？"

#. TRANSLATORS: Here "station" is a survey station, not a
#. train station.
#: ../src/netartic.c:355
#: n:71
msgid "The following survey stations are not attached to a fixed point:"
msgstr "下列测量站未连接到固定点："

#: ../src/netskel.c:133
#: n:72
#, c-format
msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
msgstr "测量没有固定点。 因此，我将%s固定在 (0,0,0)"

#. TRANSLATORS: fixed survey station that is not part of any survey
#: ../src/listpos.c:68
#: n:73
#, c-format
msgid "Unused fixed point “%s”"
msgstr "未使用的固定点“%s”"

#: ../src/matrix.c:120
#: n:75
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "解%d联立方程"

#. TRANSLATORS: This is an error from the *DATA command.  It
#. means that a reading (which will appear where %s is isn't
#. valid as the list of readings has already included the same
#. reading, or an equivalent one (e.g. you can't have both
#. DEPTH and DEPTHCHANGE together).
#: ../src/commands.c:1794
#: n:77
#, c-format
msgid "Reading “%s” duplicates previous reading(s)"
msgstr "读取“%s”与以前的读取重复"

#: ../src/matrix.c:118
#: n:78
msgid "Solving one equation"
msgstr "解一个方程"

#: ../src/datain.c:3961
#: ../src/datain.c:4197
#: ../src/datain.c:4612
#: n:79
msgid "Negative adjusted tape reading"
msgstr "负调整距离读数"

#: ../src/commands.c:2352
#: ../src/commands.c:2366
#: ../src/commands.c:3049
#: ../src/commands.c:3070
#: n:80
msgid "Date is in the future!"
msgstr "日期在未来！"

#: ../src/commands.c:2363
#: ../src/commands.c:3078
#: n:81
msgid "End of date range is before the start"
msgstr "结束日期范围在开始日期之前"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at
#. station "entrance.27", but there is no station "entrance.27" in
#. the centre-line.
#: ../src/netskel.c:1060
#: n:83
#, c-format
msgid "Cross section specified at non-existent station “%s”"
msgstr "在不存在的站“%s”处指定的横截面"

#. TRANSLATORS: In data with backsights, the user has tried to give a
#. plumb for the foresight and a clino reading for the backsight, or
#. something similar.
#: ../src/datain.c:3985
#: n:84
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "倾角和后视倾角的读数必须是同一类型"

#. TRANSLATORS: We've been told the foresight and backsight are
#. both "UP", or that they're both "DOWN".
#: ../src/datain.c:4011
#: n:92
msgid "Plumbed CLINO and BACKCLINO readings can't be in the same direction"
msgstr "垂直的倾角和后视倾角度数不能在同一方向"

#: ../src/commands.c:2979
#: ../src/commands.c:3015
#: ../src/readval.c:992
#: n:86
msgid "Invalid month"
msgstr "无效的月份"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/commands.c:2991
#: ../src/commands.c:3028
#: ../src/readval.c:999
#: n:87
msgid "Invalid day of the month"
msgstr "无效的日期号数"

#: ../src/cavern.c:261
#: n:88
#, c-format
msgid "3d file format versions %d to %d supported"
msgstr "支持%d到%d的3d文件格式版本"

#: ../src/readval.c:195
#: n:89
msgid "Expecting survey name"
msgstr "需要测量名称"

#: ../src/datain.c:3131
#: ../src/datain.c:3133
#: ../src/datain.c:3456
#: ../src/extend.c:691
#: ../src/gfxcore.cc:4568
#: ../src/mainfrm.cc:409
#: ../src/sorterr.c:143
#: n:1
#, c-format
msgid "Couldn’t open file “%s”"
msgstr "无法打开文件 “%s”"

#: ../src/printing.cc:674
#: ../src/survexport.cc:464
#: n:402
#, c-format
msgid "Couldn’t write file “%s”"
msgstr "无法写入文件“%s”"

#: ../src/datain.c:2533
#: ../src/datain.c:2538
#: n:498
msgid "Failed to create temporary file"
msgstr "无法创建临时文件"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. https://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:697
#: ../src/commands.c:813
#: ../src/commands.c:837
#: ../src/commands.c:1667
#: ../src/commands.c:2128
#: ../src/readval.c:87
#: n:95
msgid "Further uses of this deprecated feature will not be reported"
msgstr "不会报告此已弃用功能的进一步使用"

#. TRANSLATORS: %s is replaced by the amount the readings disagree
#. by, e.g. "0.12m" or "0.2ft".
#: ../src/datain.c:5190
#: ../src/datain.c:5318
#: n:97
#, c-format
msgid "TAPE reading and BACKTAPE reading disagree by %s"
msgstr "%s的距离读取和后视距离读取不一致"

#. TRANSLATORS: %s is replaced by the amount the readings disagree
#. by, e.g. "2.5°" or "3ᵍ".
#: ../src/datain.c:3876
#: n:98
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s"
msgstr "%s的方位读数和后视方位读数不一致"

#. TRANSLATORS: %s is replaced by the amount the readings disagree
#. by, e.g. "2.5°" or "3ᵍ".
#: ../src/datain.c:4063
#: n:99
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s"
msgstr "%s的倾角读数和后视倾角读数不一致"

#: ../src/commands.c:1664
#: n:104
#, c-format
msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
msgstr "“*data %s %c …”已弃用-请改用“*data %s …”"

#. TRANSLATORS: Perhaps the user tried to load a different type of file as
#. a Survex .3d file, or the .3d file was corrupted.
#: ../src/img_for_survex.h:41
#: n:4
#, c-format
msgid "Bad 3d image file “%s”"
msgstr "错误的3d图像文件“%s”"

#. TRANSLATORS: This is the date format string used to timestamp .3d
#. files internally.  Probably best to keep it the same for all
#. translations.
#: ../src/model.cc:382
#: n:107
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: used a processed survey with no processing date/time info
#: ../src/model.cc:375
#: n:108
msgid "Date and time not available."
msgstr "日期和时间不可用。"

#: ../src/img_for_survex.h:42
#: n:6
#, c-format
msgid "Error reading from file “%s”"
msgstr "读取文件“%s”时出错"

#: ../src/cavernlog.cc:662
#: ../src/filename.c:107
#: ../src/mainfrm.cc:371
#: ../src/mainfrm.cc:1549
#: n:7
#, c-format
msgid "Error writing to file “%s”"
msgstr "写入文件“%s”时出错"

#: ../src/filename.c:110
#: n:111
msgid "Error writing to file"
msgstr "写入文件出错"

#: ../src/cavern.c:410
#: n:113
#, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "有%d个警告和%d个错误-未生成输出文件。"

#: ../src/img_for_survex.h:43
#: n:8
#, c-format
msgid "File “%s” has a newer format than this program can understand"
msgstr "文件“%s”的格式比此程序所能理解的要新"

#: ../src/printing.cc:1182
#: n:115
msgid "North"
msgstr "北"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printing.cc:1207
#: n:116
msgid "Elevation on"
msgstr "仰角"

#: ../src/printing.cc:468
#: n:117
msgid "P&lan view"
msgstr "平面图(&L)"

#: ../src/printing.cc:470
#: n:285
msgid "&Elevation"
msgstr "立面(&E)"

#. TRANSLATORS: Label used for "clino" in Aven when the view is
#. neither from directly above nor from directly below.  It is
#. also used in the dialog for editing a marked position in a
#. presentation.
#.
#. Try to keep this translation short - ideally at most 10
#. characters - as otherwise the compass and clino will be moved
#. further apart to make room. */
#: ../src/gfxcore.cc:910
#: ../src/gfxcore.cc:2139
#: ../src/mainfrm.cc:160
#: n:118
msgid "Elevation"
msgstr "立面"

#. TRANSLATORS: Label used for "clino" in Aven when the view is
#. from directly above.
#.
#. Try to keep this translation short - ideally at most 10
#. characters - as otherwise the compass and clino will be moved
#. further apart to make room. */
#: ../src/gfxcore.cc:810
#: ../src/gfxcore.cc:2133
#: n:432
msgid "Plan"
msgstr "计划"

#. TRANSLATORS: Label used for "clino" in Aven when the view is
#. from directly below.
#.
#. Try to keep this translation short - ideally at most 10
#. characters - as otherwise the compass and clino will be moved
#. further apart to make room. */
#: ../src/gfxcore.cc:824
#: ../src/gfxcore.cc:2136
#: n:433
msgid "Kiwi Plan"
msgstr "仰视平面"

#: ../src/cavern.c:373
#: n:120
msgid "Calculating statistics"
msgstr "正在计算统计数据"

#: ../src/readval.c:906
#: n:121
msgid "Expecting string field"
msgstr "应为字符串字段"

#: ../src/cmdline.c:211
#: n:122
msgid "too few arguments"
msgstr "太少参数"

#: ../src/cmdline.c:218
#: n:123
msgid "too many arguments"
msgstr "的参数太多"

#: ../src/cmdline.c:177
#: ../src/cmdline.c:180
#: ../src/cmdline.c:184
#: n:124
msgid "FILE"
msgstr "文件"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:173
#: n:125
msgid "Removing trailing traverses"
msgstr "删除尾部导线"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#: ../src/netskel.c:232
#: n:126
msgid "Concatenating traverses"
msgstr "串联导线"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#: ../src/netskel.c:438
#: n:127
msgid "Calculating traverses"
msgstr "计算导线"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:787
#: n:128
msgid "Calculating trailing traverses"
msgstr "计算尾部导线"

#: ../src/network.c:67
#: n:129
msgid "Simplifying network"
msgstr "简化网络"

#: ../src/network.c:512
#: n:130
msgid "Calculating network"
msgstr "计算网络"

#: ../src/datain.c:4734
#: n:131
#, c-format
msgid "Found “%s”, expecting “F” or “B”"
msgstr "找到“%s”，应为“F”或“B”"

#: ../src/cavern.c:550
#: n:132
#, c-format
msgid "Total length of survey legs = %7.2f%s (%7.2f%s adjusted)"
msgstr "测量段的总长度 = %7.2f%s (%7.2f%s 调整过的)"

#: ../src/cavern.c:553
#: n:133
#, c-format
msgid "Total plan length of survey legs = %7.2f%s"
msgstr "测量段的总平面长度 = %7.2f%s"

#: ../src/cavern.c:556
#: n:134
#, c-format
msgid "Total vertical length of survey legs = %7.2f%s"
msgstr "测量段的总垂直长度 = %7.2f%s"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:563
#: n:135
#, c-format
msgid "Vertical range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
msgstr "垂直范围 = %4.2f%s（从%s位于%4.2f%s处到%s位于%4.2f%s处）"

#. TRANSLATORS: c.f. previous message
#: ../src/cavern.c:566
#: n:136
#, c-format
msgid "North-South range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
msgstr ""

#. TRANSLATORS: c.f. previous two messages
#: ../src/cavern.c:569
#: n:137
#, c-format
msgid "East-West range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
msgstr ""

#: ../src/cavern.c:531
#: n:138
msgid "There is 1 loop."
msgstr "有一个环路"

#: ../src/cavern.c:533
#: n:139
#, c-format
msgid "There are %ld loops."
msgstr "有%ld个环路"

#: ../src/cavern.c:395
#: n:140
#, c-format
msgid "CPU time used %5.2fs"
msgstr "CPU使用时间%5.2fs"

#: ../src/cavern.c:398
#: n:141
#, c-format
msgid "Time used %5.2fs"
msgstr "使用时间%5.2fs"

#: ../src/cavern.c:400
#: n:142
msgid "Time used unavailable"
msgstr "使用时间不可用"

#: ../src/cavern.c:403
#: n:143
#, c-format
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "使用时间%5.2fs（%5.2fs CPU时间）"

#: ../src/netskel.c:752
#: n:145
#, c-format
msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
msgstr "原始长度%6.2fm（%3d个段），移动了%6.2fm（%5.2fm/段）。 "

#: ../src/netskel.c:755
#: n:146
#, c-format
msgid "Error %6.2f%%"
msgstr "误差 %6.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
#. traverse has zero length, so error per metre is meaningless.
#.
#. There should be 4 spaces between "Error" and "N/A" so that it lines
#. up with the numbers in the message above.
#: ../src/netskel.c:762
#: n:147
msgid "Error    N/A"
msgstr "误差    不适用（导线长度为0）"

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:137
#: n:150
msgid "display this help and exit"
msgstr "显示该求助信息并退出"

#. TRANSLATORS: description of --version option
#: ../src/cmdline.c:140
#: n:151
msgid "output version information and exit"
msgstr "显示版本信息并退出"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
#: ../src/cmdline.c:169
#: n:153
msgid "OPTION"
msgstr "选项"

#: ../src/mainfrm.cc:164
#: ../src/printing.cc:406
#: ../src/printing.cc:1244
#: ../src/printing.cc:1293
#: n:154
msgid "Scale"
msgstr "比例尺"

#. TRANSLATORS: These example input values should not be translated.
#: ../src/survexport.cc:134
#: n:217
msgid "scale (50, 0.02, 1:50 and 2:100 all mean 1:50)"
msgstr "比例（50、 0.02、1:50 和 2:100 均为 1:50）"

#: ../src/cmdline.c:193
#: n:157
#, c-format
msgid "Try “%s --help” for more information.\n"
msgstr "请尝试“%s --help”获取更多信息。\n"

#. TRANSLATORS: N/M meaning page N of M in the page footer of a printout.
#: ../src/printing.cc:1950
#: n:232
#, c-format
msgid "%d/%d"
msgstr "%d/%d"

#. TRANSLATORS: Used in the footer of printouts to compactly indicate that
#. the date which follows is the date that the survey data was processed.
#.
#. Aven will replace %s with a string giving the date and time (e.g.
#. "2015-06-09 12:40:44").
#: ../src/printing.cc:1991
#: n:167
#, c-format
msgid "Processed: %s"
msgstr "已处理：%s"

#. TRANSLATORS: Used in the footer of printouts to compactly
#. indicate this is a plan view and what the viewing angle is.
#. Aven will replace %s with the bearing, and %.0f with the scale.
#.
#. This message probably doesn't need translating for most languages.
#: ../src/printing.cc:1905
#: n:233
#, c-format
msgid "↑%s 1:%.0f"
msgstr "↑%s 1:%.0f"

#. TRANSLATORS: Used in the footer of printouts to compactly
#. indicate this is an elevation view and what the viewing angle
#. is.  Aven will replace the %s codes with the bearings to the
#. left and right of the viewer, and %.0f with the scale.
#.
#. This message probably doesn't need translating for most languages.
#: ../src/printing.cc:1916
#: n:235
#, c-format
msgid "%s↔%s 1:%.0f"
msgstr "%s↔%s 1:%.0f"

#. TRANSLATORS: Used in the footer of printouts to compactly
#. indicate this is a tilted elevation view and what the viewing
#. angles are.  Aven will replace the %s codes with the bearings to
#. the left and right of the viewer and the angle the view is
#. tilted at, and %.0f with the scale.
#.
#. This message probably doesn't need translating for most languages.
#: ../src/printing.cc:1929
#: n:236
#, c-format
msgid "%s↔%s ∡%s 1:%.0f"
msgstr "%s↔%s ∡%s 1:%.0f"

#. TRANSLATORS: Used in the footer of printouts to compactly
#. indicate this is an extended elevation view.  Aven will replace
#. %.0f with the scale.
#.
#. Try to keep the translation short (for example, in English we
#. use "Extended" not "Extended elevation") - there is limited room
#. in the footer, and the details there are mostly to make it easy
#. to check that you have corresponding pages from a multiple page
#. printout.
#: ../src/printing.cc:1945
#: n:244
#, c-format
msgid "Extended 1:%.0f"
msgstr "扩展1:%.0f"

#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
#. something like "123°".  The bearing is up the page.
#: ../src/printing.cc:1188
#: n:168
#, c-format
msgid "Plan view, %s up page"
msgstr "平面图，纸上%s"

#. TRANSLATORS: This is used on printouts of elevations, with %s
#. replaced by something like "123°".  The bearing is the direction
#. we’re looking.
#: ../src/printing.cc:1220
#: n:169
#, c-format
msgid "Elevation facing %s"
msgstr "立面，面朝%s"

#. TRANSLATORS: Don't translate example command line option --tilt=-90
#: ../src/survexport.cc:140
#: n:462
msgid "plan view (equivalent to --tilt=-90)"
msgstr "平面图 (equivalent to --tilt=-90)"

#. TRANSLATORS: This is used on printouts of tilted elevations, with
#. the first %s replaced by something like "123°", and the second by
#. something like "-45°".  The bearing is the direction we’re
#. looking.
#: ../src/printing.cc:1227
#: n:284
#, c-format
msgid "Elevation facing %s, tilted %s"
msgstr "立面朝向%s，倾斜%s"

#. TRANSLATORS: Don't translate example command line option --tilt=0
#: ../src/survexport.cc:142
#: n:463
msgid "elevation view (equivalent to --tilt=0)"
msgstr "立面图(equivalent to --tilt=0)"

#. TRANSLATORS: This is used on printouts of extended elevations.
#: ../src/printing.cc:1236
#: n:191
msgid "Extended elevation"
msgstr "立面展开图"

#: ../src/cavern.c:513
#: n:172
msgid "Survey contains 1 survey station,"
msgstr "测量包含1个测量站，"

#: ../src/cavern.c:515
#: n:173
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "测量包含%ld个测量站，"

#: ../src/cavern.c:519
#: n:174
msgid " joined by 1 leg."
msgstr " 由1条测量段连接。"

#: ../src/cavern.c:521
#: n:175
#, c-format
msgid " joined by %ld legs."
msgstr " 由%ld条测量段连接。"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: n:176
msgid "node"
msgstr "节点"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: n:177
msgid "nodes"
msgstr "节点"

#. TRANSLATORS: "Connected component" in the graph theory sense - it
#. means there are %ld bits of survey with no connections between
#. them.  This message is only used if there are more than 1.
#: ../src/cavern.c:541
#: n:178
#, c-format
msgid "Survey has %ld connected components."
msgstr "测量有%ld个连接的组件。"

#. TRANSLATORS: Label for button in aven’s cavern log window which
#. allows the user to save the log to a file.
#: ../src/cavernlog.cc:600
#: n:446
msgid "&Save Log"
msgstr "保存日志(&S)"

#. TRANSLATORS: Label for button in aven’s cavern log window which
#. causes the survey data to be reprocessed.
#: ../src/cavernlog.cc:604
#: n:184
msgid "&Reprocess"
msgstr "重新处理(&R)"

#: ../src/cmdline.c:241
#: ../src/cmdline.c:260
#: n:185
#, c-format
msgid "numeric argument “%s” out of range"
msgstr "数值参数“%s”超出范围"

#: ../src/cmdline.c:243
#: n:186
#, c-format
msgid "argument “%s” not an integer"
msgstr "参数“%s”不是整数"

#: ../src/cmdline.c:262
#: n:187
#, c-format
msgid "argument “%s” not a number"
msgstr "参数“%s”不是数字"

#: ../src/commands.c:2964
#: ../src/datain.c:631
#: ../src/datain.c:639
#: ../src/datain.c:1704
#: ../src/datain.c:1937
#: ../src/datain.c:4354
#: n:497
#, c-format
msgid "Expecting “%s”"
msgstr "应为“%s”"

#: ../src/commands.c:2896
#: ../src/datain.c:930
#: ../src/datain.c:1614
#: ../src/datain.c:1972
#: ../src/datain.c:2094
#: ../src/datain.c:2234
#: ../src/datain.c:2266
#: ../src/datain.c:2621
#: n:103
#, c-format
msgid "Expecting “%s” or “%s”"
msgstr "应为“%s”或“%s”"

#: ../src/commands.c:1384
#: ../src/commands.c:2056
#: ../src/datain.c:1571
#: ../src/datain.c:1994
#: ../src/datain.c:2017
#: ../src/datain.c:4397
#: n:188
#, c-format
msgid "Expecting “%s”, “%s”, or “%s”"
msgstr "应为“%s”、“%s”或“%s”"

#: ../src/commands.c:1388
#: ../src/datain.c:2044
#: ../src/datain.c:2071
#: n:189
#, c-format
msgid "Expecting “%s”, “%s”, “%s”, or “%s”"
msgstr "应为“%s”、“%s”、“%s”或“%s”"

#: ../src/readval.c:692
#: ../src/readval.c:700
#: ../src/readval.c:708
#: ../src/readval.c:716
#: n:483
#, c-format
msgid "Expecting quadrant bearing, found “%s”"
msgstr ""

#. TRANSLATORS: The first %s is replaced by a station name,
#. the second %s by "entrance" or "export".
#: ../src/listpos.c:95
#: ../src/listpos.c:103
#: n:190
#, c-format
msgid "Station “%s” referred to by *%s but never used"
msgstr "测量站“%s”由 *%s 引用，但从未使用"

#. TRANSLATORS: %s is replaced with e.g. BEGIN or .BOOK or #[
#: ../src/commands.c:1063
#: ../src/datain.c:2317
#: ../src/datain.c:2462
#: ../src/datain.c:3201
#: n:192
#, c-format
msgid "No matching %s"
msgstr "没有匹配%s"

#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
#. same <survey> if it’s given at all
#: ../src/commands.c:1103
#: n:193
msgid "Survey name doesn’t match BEGIN"
msgstr "测量名称与BEGIN不匹配"

#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
#. END command omits it, e.g.:
#.
#. *begin entrance
#. 1 2 10.00 178 -01
#. *end     <--[Message given here]
#: ../src/commands.c:1112
#: n:194
msgid "Survey name omitted from END"
msgstr "调查名称被从END处省略"

#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the
#. “,”s (or at least the columns) are in the same place
#: ../src/pos.cc:98
#: n:195
msgid "( Easting, Northing, Altitude )"
msgstr "( 向东,    向北,     海拔     )"

#. TRANSLATORS: bpp is "Bits Per Pixel"
#: ../src/aboutdlg.cc:172
#: n:196
#, c-format
msgid "Display Depth: %d bpp"
msgstr "显示深度：%d bpp(每像素位数)"

#. TRANSLATORS: appended to previous message if the display is colour
#: ../src/aboutdlg.cc:174
#: n:197
msgid " (colour)"
msgstr " （彩色）"

#: ../src/commands.c:2865
#: ../src/commands.c:2927
#: ../src/commands.c:2970
#: ../src/commands.c:2986
#: ../src/commands.c:3011
#: ../src/commands.c:3022
#: ../src/readval.c:941
#: ../src/readval.c:949
#: ../src/readval.c:955
#: n:198
#, c-format
msgid "Expecting date, found “%s”"
msgstr "需要日期，发现“%s”"

#. TRANSLATORS: --help output for --survey option.
#.
#. "this" has been added to English translation
#: ../src/aven.cc:70
#: ../src/diffpos.c:56
#: ../src/dump3d.c:48
#: ../src/extend.c:486
#: ../src/survexport.cc:132
#: n:199
msgid "only load the sub-survey with this prefix"
msgstr "仅加载具有此前缀的子测量"

#. TRANSLATORS: --help output for aven --print option
#: ../src/aven.cc:72
#: n:119
msgid "print and exit (requires a 3d file)"
msgstr "打印并退出（需要3d文件）"

#. TRANSLATORS: --help output for cavern --output option
#: ../src/cavern.c:115
#: n:162
msgid "set location for output files"
msgstr "设置输出文件的位置"

#. TRANSLATORS: --help output for cavern --quiet option
#: ../src/cavern.c:117
#: n:163
#, fuzzy
msgid "fewer messages (-qq for even fewer)"
msgstr "仅显示简要摘要（-qq仅用于错误）"

#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
#: ../src/cavern.c:119
#: n:164
msgid "do not create .err file"
msgstr "不创建.err文件"

#. TRANSLATORS: --help output for cavern --warnings-are-errors option
#: ../src/cavern.c:121
#: n:165
msgid "turn warnings into errors"
msgstr "将警告转换为错误"

#. TRANSLATORS: --help output for cavern --log option
#: ../src/cavern.c:123
#: n:170
msgid "log output to .log file"
msgstr "日志输出到.log文件"

#. TRANSLATORS: --help output for cavern --3d-version option
#: ../src/cavern.c:125
#: n:171
msgid "specify the 3d file format version to output"
msgstr "指定要输出的3d文件格式版本"

#. TRANSLATORS: --help output for extend --specfile option
#: ../src/extend.c:488
#: n:90
msgid ".espec file to control extending"
msgstr "用.espec文件来控制扩展"

#. TRANSLATORS: --help output for extend --show-breaks option
#: ../src/extend.c:490
#: n:91
msgid "show breaks with surface survey legs in output"
msgstr "使用输出中的地面测量段显示中断"

#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
#. meaningless to say your tape is marked in "0 feet" (but you might
#. measure distance by counting knots on a diving line, and tie them
#. every "2 feet").
#: ../src/commands.c:1937
#: n:200
msgid "*UNITS factor must be non-zero"
msgstr "*UNITS 因子必须为非零"

#: ../src/model.cc:392
#: n:202
#, c-format
msgid "No survey data in 3d file “%s”"
msgstr "3d文件“%s”中没有测量数据"

#. TRANSLATORS: Used in aven above the compass indicator at the lower
#. right of the display, with a bearing below "Facing".  This indicates the
#. direction the viewer is "facing" in.
#.
#. Try to keep this translation short - ideally at most 10 characters -
#. as otherwise the compass and clino will be moved further apart to
#. make room. */
#: ../src/gfxcore.cc:796
#: ../src/gfxcore.cc:2120
#: n:203
msgid "Facing"
msgstr "封面"

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:60
#: n:205
#, c-format
msgid "About %s"
msgstr "关于%s"

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a
#. grid of height values).
#: ../src/mainfrm.cc:1468
#: n:451
msgid "Select a terrain file to view"
msgstr "选择要查看的地形文件"

#: ../src/mainfrm.cc:1498
#: n:496
msgid "Select a geodata file to overlay"
msgstr ""

#: ../src/mainfrm.cc:1462
#: n:452
msgid "Terrain files"
msgstr "地形文件"

#: ../src/mainfrm.cc:1494
#: n:495
msgid "Geodata files"
msgstr ""

#. TRANSLATORS: Aven shows a circle of terrain covering the area
#. of the survey plus a bit, but the terrain data file didn't
#. contain any data inside that circle.
#: ../src/gfxcore.cc:3175
#: n:161
msgid "No terrain data near area of survey"
msgstr "测量区域附近无地形数据"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. File->Open dialog:
#: ../src/mainfrm.cc:1439
#: n:206
msgid "Select a survey file to view"
msgstr "选择要查看的测量文件"

#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
#. file extension, so neither should be translated.
#: ../src/export.cc:64
#: ../src/mainfrm.cc:1400
#: ../src/mainfrm.cc:1603
#: n:207
msgid "Survex 3d files"
msgstr "Survex 3d 文件"

#: ../src/mainfrm.cc:1431
#: ../src/mainfrm.cc:1463
#: ../src/mainfrm.cc:1495
#: ../src/mainfrm.cc:2037
#: ../src/printing.cc:644
#: n:208
msgid "All files"
msgstr "全部文件"

#. TRANSLATORS: Here "survey" is a "cave map" rather than
#. list of questions - it should be translated to the
#. terminology that cavers using the language would use.
#: ../src/mainfrm.cc:1397
#: n:229
msgid "All survey files"
msgstr "所有测量文件"

#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
#. file extension, so neither should be translated.
#: ../src/mainfrm.cc:1403
#: n:329
msgid "Survex svx files"
msgstr "Survex svx 文件"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so should not be translated
#: ../src/mainfrm.cc:1411
#: n:330
msgid "Compass MAK files"
msgstr "Compass MAK 文件"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so should not be translated
#: ../src/mainfrm.cc:1415
#: n:490
msgid "Compass DAT files"
msgstr "Compass DAT 文件"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so should not be translated
#: ../src/mainfrm.cc:1419
#: n:491
msgid "Compass CLP files"
msgstr "Compass CLP 文件"

#. TRANSLATORS: "Walls" is David McKenzie's cave
#. surveying package, so should not be translated
#: ../src/mainfrm.cc:1423
#: n:504
msgid "Walls project files"
msgstr ""

#. TRANSLATORS: "Walls" is David McKenzie's cave
#. surveying package, so should not be translated
#: ../src/mainfrm.cc:1427
#: n:505
msgid "Walls survey data files"
msgstr ""

#: ../src/export.cc:67
#: n:101
msgid "CSV files"
msgstr "CSV 文件"

#: ../src/export.cc:70
#: n:411
msgid "DXF files"
msgstr "DXF 文件"

#: ../src/export.cc:73
#: n:412
msgid "EPS files"
msgstr "EPS 文件"

#: ../src/export.cc:76
#: n:413
msgid "GPX files"
msgstr "GPS 文件"

#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
#. on a (usually large) sheet of paper using a pen mounted in a motorised
#. mechanism.
#: ../src/export.cc:82
#: n:414
msgid "HPGL for plotters"
msgstr "绘图仪用HPGL"

#: ../src/export.cc:88
#: n:444
msgid "KML files"
msgstr "KML 文件"

#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
#. so should not be translated:
#. https://www.fountainware.com/compass/
#: ../src/export.cc:94
#: n:415
msgid "Compass PLT for use with Carto"
msgstr "与Carto一起使用的Compass PLT"

#. TRANSLATORS: Survex is the name of the software, and "pos" refers to a
#. file extension, so neither should be translated.
#: ../src/export.cc:99
#: n:166
msgid "Survex pos files"
msgstr "Survex pos 打开"

#: ../src/export.cc:102
#: n:417
msgid "SVG files"
msgstr "SVG 文件"

#: ../src/export.cc:85
#: n:445
msgid "JSON files"
msgstr "JSON 文件"

#: ../src/export.cc:105
#: ../src/printing.cc:376
#: n:523
msgid "Shapefiles (lines)"
msgstr ""

#: ../src/export.cc:108
#: ../src/printing.cc:377
#: n:524
msgid "Shapefiles (points)"
msgstr ""

#. TRANSLATORS: Log files from running cavern (extension .log)
#: ../src/cavernlog.cc:652
#: n:447
msgid "Log files"
msgstr "日志文件"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. This string is used in the about box (summarising the purpose of aven).
#: ../src/aboutdlg.cc:88
#: n:209
msgid "Survey visualisation tool"
msgstr "测量可视化工具"

#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
#. some languages here:
#. https://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
#: ../src/aboutdlg.cc:102
#: n:219
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "本程序是自由软件；您可以根据自由软件基金会发布的GNU通用公共许可证的条款重新发布和/或修改它；许可证的第2版或（由您选择）任何更高版本。"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:264
#: n:218
msgid "FILE1 FILE2 [THRESHOLD]"
msgstr "文件1 文件2 [阈值]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:266
#: n:255
#, c-format
msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
msgstr "文件1和文件2可以是.pos或.3d文件\n阈值为延任何轴可忽略的改变的最大值，单位“米”(默认 %s)"

#. TRANSLATORS: Part of extend --help
#: ../src/extend.c:559
#: n:267
msgid "INPUT_FILE [OUTPUT_3D_FILE]"
msgstr ""

#. TRANSLATORS: Part of sorterr --help
#: ../src/sorterr.c:124
#: n:268
msgid "ERR_FILE [HOW_MANY]"
msgstr ""

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. Part of aven --help
#: ../src/aven.cc:170
#: ../src/aven.cc:215
#: n:269
msgid "[SURVEY_FILE]"
msgstr ""

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. Part of cavern --help
#: ../src/cavern.c:227
#: n:507
msgid "[SURVEY_DATA_FILE]"
msgstr ""

#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
#. are surveys without date information.  Try to keep this fairly short.
#: ../src/gfxcore.cc:1164
#: n:221
msgid "Undated"
msgstr "取消隐藏"

#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
#. which aren’t part of a loop and so have no error information. Try to keep
#. this fairly short.
#: ../src/gfxcore.cc:1189
#: n:290
msgid "Not in loop"
msgstr "不在环路中"

#. TRANSLATORS: error from:
#.
#. *data normal newline from to tape compass clino
#: ../src/commands.c:1778
#: n:222
msgid "NEWLINE can’t be the first reading"
msgstr ""

#. TRANSLATORS: error from:
#.
#. *data normal from to tape compass clino newline
#: ../src/commands.c:1819
#: n:223
msgid "NEWLINE can’t be the last reading"
msgstr ""

#. TRANSLATORS: Error given by something like:
#.
#. *data normal station tape compass clino
#.
#. ("station" signifies interleaved data).
#: ../src/commands.c:1842
#: n:224
msgid "Interleaved readings, but no NEWLINE"
msgstr "交错的读数，但没有NEWLINE"

#. TRANSLATORS: caused by e.g.
#.
#. *data diving station newline depth tape compass
#.
#. ("depth" needs to occur before "newline").
#: ../src/commands.c:1718
#: n:225
#, c-format
msgid "Reading “%s” must occur before NEWLINE"
msgstr "必须在NEWLINE前读取“%s”"

#. TRANSLATORS: e.g.
#.
#. *data normal from to tape newline compass clino
#: ../src/commands.c:1769
#: n:226
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "NEWLINE前只能有STATION、DEPTH和COUNT"

#. TRANSLATORS: e.g.
#.
#. *calibrate tape compass 1 1
#: ../src/commands.c:1987
#: n:227
msgid "Can’t calibrate angular and length quantities together"
msgstr "无法同时校准角度和长度量"

#: ../src/commands.c:855
#: ../src/commands.c:867
#: n:397
msgid "Bad *alias command"
msgstr "错误的*alias命令"

#. TRANSLATORS: %s will be replaced by the application name ("Aven"
#. currently)
#: ../src/log.cc:30
#: n:228
#, c-format
msgid "%s Error Log"
msgstr "%s错误日志"

#. TRANSLATORS: The text on the action button in the "Export" settings
#. dialog
#: ../src/printing.cc:586
#: n:230
msgid "&Export..."
msgstr "导出(&E)..."

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
#. this group.  Tickable menu item which toggles auto rotation.
#. Please don't translate "Space" - that's the shortcut key to use which
#. wxWidgets needs to parse and it should then handle translating.
#: ../src/mainfrm.cc:791
#: n:231
msgid "Au&to-Rotate\tSpace"
msgstr ""

#: ../src/mainfrm.cc:793
#: n:234
msgid "&Reverse Direction\tR"
msgstr "反向(&R)\tR"

#. TRANSLATORS: View *looking* North
#: ../src/gfxcore.cc:4393
#: ../src/mainfrm.cc:796
#: n:240
msgid "View &North\tN"
msgstr ""

#. TRANSLATORS: View *looking* East
#: ../src/gfxcore.cc:4395
#: ../src/mainfrm.cc:797
#: n:241
msgid "View &East\tE"
msgstr ""

#. TRANSLATORS: View *looking* South
#: ../src/gfxcore.cc:4397
#: ../src/mainfrm.cc:798
#: n:242
msgid "View &South\tS"
msgstr ""

#. TRANSLATORS: View *looking* West
#: ../src/gfxcore.cc:4399
#: ../src/mainfrm.cc:799
#: n:243
msgid "View &West\tW"
msgstr ""

#: ../src/gfxcore.cc:4419
#: ../src/mainfrm.cc:801
#: n:248
msgid "&Plan View\tP"
msgstr ""

#: ../src/gfxcore.cc:4420
#: ../src/mainfrm.cc:802
#: n:249
msgid "E&levation\tL"
msgstr ""

#: ../src/mainfrm.cc:804
#: n:254
msgid "Restore De&fault View\tDelete"
msgstr ""

#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
#. the "what to print/export" dialog.
#: ../src/printing.cc:364
#: n:283
msgid "View"
msgstr "查看"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey
#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
#. "Elements" isn’t a good name for this but nothing better has yet come to
#. mind!
#: ../src/printing.cc:369
#: n:256
msgid "Elements"
msgstr "元素"

#: ../src/printing.cc:374
#: n:410
msgid "Export format"
msgstr "导出格式"

#: ../src/printing.cc:439
#: ../src/printing.cc:847
#: n:257
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d页（%dx%d）"

#. TRANSLATORS: used in the scale drop down selector in the print
#. dialog the implicit meaning is "choose a suitable scale to fit
#. the plot on a single page", but we need something shorter
#: ../src/printing.cc:411
#: n:258
msgid "One page"
msgstr "一页"

#: ../src/mainfrm.cc:156
#: ../src/printing.cc:446
#: n:259
msgid "Bearing"
msgstr "方位"

#. TRANSLATORS: These example input values should not be translated.
#: ../src/survexport.cc:136
#: n:460
msgid "bearing (90, 90d, 100g all mean 90°)"
msgstr "方位 (90, 90d, 100g 均为 90°)"

#: ../src/pos.cc:90
#: n:100
msgid "Station Name"
msgstr "站名"

#: ../src/printing.cc:496
#: n:260
msgid "Station Names"
msgstr "站名"

#. TRANSLATORS: Label for a checkbox in the print/export dialog.
#: ../src/printing.cc:500
#: n:537
msgid "Anonymous stations"
msgstr ""

#. TRANSLATORS: Option description in `survexport --help` output.
#: ../src/survexport.cc:149
#: n:538
msgid "anonymous stations"
msgstr ""

#: ../src/survexport.cc:147
#: n:475
msgid "station labels"
msgstr "站标签"

#: ../src/printing.cc:492
#: n:261
msgid "Crosses"
msgstr "格点"

#: ../src/survexport.cc:146
#: n:474
msgid "station markers"
msgstr "站标志"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printing.cc:478
#: n:262
msgid "Underground Survey Legs"
msgstr "地下测量段"

#: ../src/survexport.cc:143
#: n:476
msgid "underground survey legs"
msgstr "地下测量段"

#: ../src/printing.cc:512
#: n:393
msgid "Cross-sections"
msgstr "截面"

#: ../src/survexport.cc:151
#: n:469
msgid "cross-sections"
msgstr "截面"

#: ../src/printing.cc:517
#: n:394
msgid "Walls"
msgstr "墙"

#: ../src/survexport.cc:152
#: n:470
msgid "walls"
msgstr "墙"

#. TRANSLATORS: Label for checkbox which controls whether there's a
#. layer in the exported file (for formats such as DXF and SVG)
#. containing polygons for the inside of cave passages).
#: ../src/printing.cc:524
#: n:395
msgid "Passages"
msgstr "通道"

#: ../src/survexport.cc:153
#: n:471
msgid "passages"
msgstr "通道"

#: ../src/printing.cc:528
#: n:421
msgid "Origin in centre"
msgstr ""

#: ../src/survexport.cc:154
#: n:472
msgid "origin in centre"
msgstr ""

#: ../src/printing.cc:532
#: n:422
msgid "Full coordinates"
msgstr "全坐标"

#: ../src/survexport.cc:155
#: n:473
msgid "full coordinates"
msgstr "全坐标"

#: ../src/printing.cc:536
#: n:477
msgid "Clamp to ground"
msgstr "贴着地面"

#: ../src/survexport.cc:156
#: n:478
msgid "clamp to ground"
msgstr "贴着地面"

#. TRANSLATORS: Used in the print dialog:
#: ../src/printing.cc:456
#: n:263
msgid "Tilt angle"
msgstr "倾角"

#. TRANSLATORS: These example input values should not be translated.
#: ../src/survexport.cc:138
#: n:461
msgid "tilt (45, 45d, 50g, 100% all mean 45°)"
msgstr "倾斜角（45, 45d, 50g, 100% 均等同于 45°）"

#. TRANSLATORS: used in the print dialog - controls drawing lines
#. around each page
#: ../src/printing.cc:544
#: n:264
msgid "Page Borders"
msgstr "页面边框"

#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
#. controls drawing the box at the lower left with survey name, view
#. angles, etc
#: ../src/printing.cc:555
#: n:265
msgid "Legend"
msgstr "图例"

#. TRANSLATORS: will be used in the print dialog - check this to print
#. blank pages (otherwise they’ll be skipped to save paper)
#: ../src/printing.cc:550
#: n:266
msgid "Blank Pages"
msgstr "空白页"

#. TRANSLATORS: Items in the "View" menu:
#: ../src/mainfrm.cc:821
#: n:270
msgid "Station &Names\tCtrl+N"
msgstr ""

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:823
#: n:346
msgid "Passage &Tubes\tCtrl+T"
msgstr ""

#. TRANSLATORS: Toggles drawing the surface of the Earth
#: ../src/mainfrm.cc:825
#: n:449
msgid "Terr&ain"
msgstr ""

#: ../src/mainfrm.cc:826
#: n:271
msgid "&Crosses\tCtrl+X"
msgstr "格点(&C)\tCtrl+X"

#: ../src/mainfrm.cc:827
#: n:297
msgid "&Grid\tCtrl+G"
msgstr "网格(&G)\tCtrl+G"

#: ../src/mainfrm.cc:828
#: n:318
msgid "&Bounding Box\tCtrl+B"
msgstr ""

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:832
#: n:272
msgid "&Underground Survey Legs\tCtrl+L"
msgstr ""

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:835
#: n:291
msgid "&Surface Survey Legs\tCtrl+F"
msgstr ""

#: ../src/survexport.cc:144
#: n:464
msgid "surface survey legs"
msgstr "地表测量段"

#: ../src/mainfrm.cc:860
#: n:273
msgid "&Overlapping Names"
msgstr ""

#: ../src/mainfrm.cc:873
#: n:450
msgid "Co&lour by"
msgstr ""

#: ../src/mainfrm.cc:876
#: n:294
msgid "Highlight &Entrances"
msgstr ""

#: ../src/mainfrm.cc:877
#: n:295
msgid "Highlight &Fixed Points"
msgstr ""

#: ../src/mainfrm.cc:878
#: n:296
msgid "Highlight E&xported Points"
msgstr ""

#: ../src/printing.cc:500
#: n:418
msgid "Entrances"
msgstr "入口"

#: ../src/survexport.cc:148
#: n:466
msgid "entrances"
msgstr "入口"

#: ../src/printing.cc:504
#: n:419
msgid "Fixed Points"
msgstr "固定点"

#: ../src/survexport.cc:149
#: n:467
msgid "fixed points"
msgstr "固定点"

#: ../src/printing.cc:508
#: n:420
msgid "Exported Stations"
msgstr "导出站"

#: ../src/survexport.cc:150
#: n:468
msgid "exported stations"
msgstr "导出站"

#: ../src/mainfrm.cc:887
#: n:237
msgid "&Perspective"
msgstr ""

#: ../src/mainfrm.cc:889
#: n:238
msgid "Textured &Walls"
msgstr ""

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
#. using that term instead if it gives a better translation which most
#. users will understand.
#: ../src/mainfrm.cc:893
#: n:239
msgid "Fade Distant Ob&jects"
msgstr ""

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:896
#: n:298
msgid "Smoot&hed Survey Legs"
msgstr ""

#: ../src/mainfrm.cc:902
#: ../src/mainfrm.cc:909
#: n:356
msgid "Full Screen &Mode\tF11"
msgstr ""

#: ../src/gfxcore.cc:4463
#: ../src/mainfrm.cc:863
#: n:292
msgid "Colour by &Depth"
msgstr ""

#: ../src/gfxcore.cc:4464
#: ../src/mainfrm.cc:864
#: n:293
msgid "Colour by D&ate"
msgstr ""

#: ../src/gfxcore.cc:4465
#: ../src/mainfrm.cc:865
#: n:289
msgid "Colour by &Error"
msgstr ""

#: ../src/gfxcore.cc:4466
#: ../src/mainfrm.cc:866
#: n:480
msgid "Colour by &Horizontal Error"
msgstr ""

#: ../src/gfxcore.cc:4467
#: ../src/mainfrm.cc:867
#: n:481
msgid "Colour by &Vertical Error"
msgstr ""

#: ../src/gfxcore.cc:4468
#: ../src/mainfrm.cc:868
#: n:85
msgid "Colour by &Gradient"
msgstr ""

#: ../src/gfxcore.cc:4469
#: ../src/mainfrm.cc:869
#: n:82
msgid "Colour by &Length"
msgstr ""

#: ../src/gfxcore.cc:4470
#: ../src/mainfrm.cc:870
#: n:448
msgid "Colour by &Survey"
msgstr ""

#: ../src/gfxcore.cc:4471
#: ../src/mainfrm.cc:871
#: n:482
msgid "Colour by St&yle"
msgstr ""

#: ../src/mainfrm.cc:937
#: n:274
msgid "&Compass"
msgstr "罗盘(&C)"

#: ../src/mainfrm.cc:938
#: n:275
msgid "C&linometer"
msgstr ""

#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/mainfrm.cc:941
#: n:276
msgid "Colour &Key"
msgstr ""

#: ../src/mainfrm.cc:942
#: n:277
msgid "&Scale Bar"
msgstr "缩放栏(&S)"

#: ../src/mainfrm.cc:918
#: n:280
msgid "&Reverse Sense\tCtrl+R"
msgstr ""

#. TRANSLATORS: Please don't translate "Escape" - that's the shortcut key
#. to use which wxWidgets needs to parse and it should then handle
#. translating.
#: ../src/mainfrm.cc:885
#: ../src/mainfrm.cc:927
#: ../src/mainfrm.cc:933
#: n:281
msgid "&Cancel Measuring Line\tEscape"
msgstr ""

#: ../src/mainfrm.cc:943
#: n:299
msgid "&Indicators"
msgstr ""

#: ../src/z_getopt.c:716
#: n:300
#, c-format
msgid "%s: option “%s” is ambiguous\n"
msgstr "%s：选项“%s”含义不明确\n"

#: ../src/z_getopt.c:766
#: n:302
#, c-format
msgid "%s: option “%c%s” doesn’t allow an argument\n"
msgstr "%s：选项“%c%s”不接受参数\n"

#: ../src/z_getopt.c:753
#: n:303
#, c-format
msgid "%s: option “--%s” doesn’t allow an argument\n"
msgstr "%s：选项“--%s”不接受参数\n"

#: ../src/z_getopt.c:814
#: n:305
#, c-format
msgid "%s: option “%s” requires an argument\n"
msgstr "%s：参数“%s”需要参数\n"

#: ../src/z_getopt.c:1186
#: n:306
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s：选项需要一个参数 -- %c\n"

#: ../src/z_getopt.c:855
#: n:307
#, c-format
msgid "%s: unrecognized option “--%s”\n"
msgstr "%s：无法识别的选项“--%s”\n"

#: ../src/z_getopt.c:866
#: n:308
#, c-format
msgid "%s: unrecognized option “%c%s”\n"
msgstr "%s：无法识别的选项“%c%s”\n"

#: ../src/z_getopt.c:927
#: n:310
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s：选项无效 -- %c\n"

#: ../src/mainfrm.cc:807
#: n:311
msgid "&New Presentation"
msgstr "新演示文档(&N)"

#: ../src/mainfrm.cc:808
#: n:312
msgid "&Open Presentation..."
msgstr "打开演示文档...(&O)"

#: ../src/mainfrm.cc:809
#: n:313
msgid "&Save Presentation"
msgstr "保存演示文档(&S)"

#: ../src/mainfrm.cc:810
#: n:314
msgid "Sa&ve Presentation As..."
msgstr "保存演示文档为...(&V)"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:813
#: n:315
msgid "&Mark"
msgstr ""

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:815
#: n:316
msgid "Pla&y"
msgstr "播放(&Y)"

#: ../src/mainfrm.cc:816
#: n:317
msgid "&Export as Movie..."
msgstr ""

#: ../src/mainfrm.cc:2114
#: n:331
msgid "Export Movie"
msgstr "导出视频"

#: ../src/cavernlog.cc:655
#: ../src/mainfrm.cc:362
#: ../src/mainfrm.cc:1606
#: n:319
msgid "Select an output filename"
msgstr "选择输出文件名"

#: ../src/mainfrm.cc:359
#: ../src/mainfrm.cc:2036
#: n:320
msgid "Aven presentations"
msgstr "Aven演示文档"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1535
#: n:321
msgid "Save Screenshot"
msgstr "保存截图"

#: ../src/mainfrm.cc:2031
#: ../src/mainfrm.cc:2034
#: n:322
msgid "Select a presentation to open"
msgstr "选择打开一个演示文档"

#: ../src/mainfrm.cc:433
#: n:323
#, c-format
msgid "Error in format of presentation file “%s”"
msgstr "演示文档“%s”的格式错误"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so probably shouldn’t be translated
#: ../src/mainfrm.cc:1407
#: n:324
msgid "Compass PLT files"
msgstr "Compass PLT 打开"

#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
#. package, so don’t translate it.
#: ../src/mainfrm.cc:1430
#: n:325
msgid "CMAP XYZ files"
msgstr "CMAP XYZ 打开"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1642
#: ../src/mainfrm.cc:2009
#: ../src/mainfrm.cc:2025
#: n:326
msgid "Modified Presentation"
msgstr "修改演示文档"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1640
#: ../src/mainfrm.cc:2008
#: ../src/mainfrm.cc:2024
#: n:327
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "当前演示文档已被修改。要放弃未保存的更改吗？"

#: ../src/mainfrm.cc:2367
#: ../src/mainfrm.cc:2380
#: n:328
msgid "No matches were found."
msgstr "未找到匹配内容。"

#. TRANSLATORS: Menu item in right-click menu in survey tree.
#: ../src/aventreectrl.cc:375
#: ../src/aventreectrl.cc:406
#: n:332
msgid "Find"
msgstr "查找"

#. TRANSLATORS: Placeholder text in aven's station search control.
#: ../src/mainfrm.cc:1033
#: n:333
msgid "Find stations"
msgstr ""

#. TRANSLATORS: Find station tooltip when stations are found.  %d is
#. replaced by the number of matching stations and %s%s%s by the
#. pattern searched for.
#: ../src/mainfrm.cc:2357
#: n:334
#, c-format
msgid "%d stations match %s%s%s"
msgstr ""

#. TRANSLATORS: Tooltip for aven's station search control.
#: ../src/mainfrm.cc:1037
#: ../src/mainfrm.cc:2365
#: n:533
msgid "Station name search (substring or wildcard)"
msgstr ""

#: ../src/mainfrm.cc:1050
#: n:535
msgid "Z exaggeration factor"
msgstr ""

#: ../src/mainfrm.cc:243
#: ../src/mainfrm.cc:1729
#: ../src/mainfrm.cc:1805
#: ../src/mainfrm.cc:1857
#: ../src/pos.cc:89
#: n:335
msgid "Altitude"
msgstr "海拔"

#. TRANSLATORS: error if you try to drag multiple files to the aven
#. window
#: ../src/mainfrm.cc:688
#: n:336
msgid "You may only view one 3d file at a time."
msgstr ""

#: ../src/mainfrm.cc:944
#: n:337
msgid "&Side Panel"
msgstr ""

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
#. Easting)
#: ../src/mainfrm.cc:1727
#: ../src/mainfrm.cc:1749
#: ../src/mainfrm.cc:1751
#: ../src/mainfrm.cc:1856
#: n:338
#, c-format
msgid "%.2f E, %.2f N"
msgstr "%.2f东%.2f北"

#. TRANSLATORS: Used in Aven:
#. From <stationname>: H 12.24m, Brg 234.5°
#: ../src/mainfrm.cc:1769
#: ../src/mainfrm.cc:1814
#: ../src/mainfrm.cc:1878
#: n:339
#, c-format
msgid "From %s"
msgstr "自 %s"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:1891
#: n:340
#, fuzzy, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "横%.2f%s, 垂直 %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
#. in Compass bearing) and "Grd" for "Gradient" (the slope angle
#. measured by the clino)
#: ../src/mainfrm.cc:1931
#: n:341
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03.1f%s, Grd %s"
msgstr ""

#. TRANSLATORS: tickable menu item in View menu.
#.
#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
#: ../src/gfxcore.cc:4451
#: ../src/gfxcore.cc:4478
#: ../src/mainfrm.cc:946
#: n:342
msgid "&Metric"
msgstr ""

#. TRANSLATORS: tickable menu item in View menu.
#.
#. Degrees are the angular measurement where there are 360 in a full
#. circle.
#: ../src/gfxcore.cc:4407
#: ../src/gfxcore.cc:4428
#: ../src/gfxcore.cc:4480
#: ../src/mainfrm.cc:947
#: n:343
msgid "&Degrees"
msgstr ""

#. TRANSLATORS: tickable menu item in View menu.
#.
#. Show the tilt of the survey as a percentage gradient (100% = 45
#. degrees = 50 grad).
#: ../src/gfxcore.cc:4433
#: ../src/mainfrm.cc:948
#: n:430
msgid "&Percent"
msgstr "百分比(&P)"

#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
#. used e.g.  "5km".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1355
#: ../src/printing.cc:1285
#: n:423
msgid "km"
msgstr "千米"

#. TRANSLATORS: abbreviation for "metres" (unit of length), used
#. e.g. "10m".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/commands.c:491
#: ../src/gfxcore.cc:1124
#: ../src/gfxcore.cc:1216
#: ../src/gfxcore.cc:1362
#: ../src/mainfrm.cc:1718
#: ../src/mainfrm.cc:1780
#: ../src/mainfrm.cc:1800
#: ../src/mainfrm.cc:1849
#: ../src/mainfrm.cc:1882
#: ../src/printing.cc:1287
#: n:424
msgid "m"
msgstr "米"

#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
#. used e.g.  "50cm".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1370
#: ../src/printing.cc:1290
#: n:425
msgid "cm"
msgstr "厘米"

#. TRANSLATORS: abbreviation for "miles" (unit of length,
#. plural), used e.g.  "2 miles".
#.
#. If there should be a space between the number and this,
#. include one in the translation.
#: ../src/gfxcore.cc:1383
#: n:426
msgid " miles"
msgstr "英里"

#. TRANSLATORS: abbreviation for "mile" (unit of length,
#. singular), used e.g.  "1 mile".
#.
#. If there should be a space between the number and this,
#. include one in the translation.
#: ../src/gfxcore.cc:1390
#: n:427
msgid " mile"
msgstr "英里"

#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
#. as: 10′
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/commands.c:492
#: ../src/gfxcore.cc:1124
#: ../src/gfxcore.cc:1216
#: ../src/gfxcore.cc:1398
#: ../src/mainfrm.cc:1723
#: ../src/mainfrm.cc:1783
#: ../src/mainfrm.cc:1803
#: ../src/mainfrm.cc:1854
#: ../src/mainfrm.cc:1887
#: n:428
msgid "′"
msgstr "′"

#. TRANSLATORS: abbreviation for "inches" (unit of length), used
#. e.g. as: 6″
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1406
#: n:429
msgid "″"
msgstr "″"

#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
#: ../src/gfxcore.cc:4402
#: n:387
msgid "&Hide Compass"
msgstr ""

#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
#: ../src/gfxcore.cc:4423
#: n:384
msgid "&Hide Clino"
msgstr ""

#. TRANSLATORS: Menu item which turns off the scale bar in aven.
#: ../src/gfxcore.cc:4446
#: n:385
msgid "&Hide scale bar"
msgstr ""

#. TRANSLATORS: Menu item which turns off the colour key.
#. The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/gfxcore.cc:4476
#: n:386
msgid "&Hide colour key"
msgstr ""

#. TRANSLATORS: degree symbol - probably should be translated to
#. itself.
#: ../src/cavern.c:486
#: ../src/commands.c:494
#: ../src/commands.c:495
#: ../src/commands.c:917
#: ../src/gfxcore.cc:778
#: ../src/gfxcore.cc:868
#: ../src/gfxcore.cc:1197
#: ../src/mainfrm.cc:1772
#: ../src/mainfrm.cc:1895
#: ../src/mainfrm.cc:1918
#: ../src/printing.cc:87
#: n:344
msgid "°"
msgstr "°"

#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
#. circle).
#: ../src/commands.c:496
#: ../src/gfxcore.cc:783
#: ../src/gfxcore.cc:873
#: ../src/gfxcore.cc:1197
#: ../src/mainfrm.cc:1775
#: ../src/mainfrm.cc:1898
#: ../src/mainfrm.cc:1921
#: n:345
msgid "ᵍ"
msgstr "ᵍ"

#. TRANSLATORS: symbol for percentage gradient (100% = 45
#. degrees = 50 grad).
#: ../src/commands.c:497
#: ../src/gfxcore.cc:859
#: ../src/gfxcore.cc:877
#: ../src/mainfrm.cc:1916
#: n:96
msgid "%"
msgstr "%"

#. TRANSLATORS: infinity symbol - used for the percentage gradient on
#. vertical angles.
#: ../src/gfxcore.cc:853
#: ../src/mainfrm.cc:1914
#: n:431
msgid "∞"
msgstr "∞"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
#. in Compass bearing)
#: ../src/mainfrm.cc:1787
#: n:374
#, c-format
msgid "%s: H %.2f%s, Brg %03.1f%s"
msgstr ""

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:1820
#: n:375
#, c-format
msgid "%s: V %.2f%s"
msgstr ""

#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
#. tree hierarchy of survey station names
#: ../src/mainfrm.cc:1105
#: n:376
msgid "Surveys"
msgstr ""

#: ../src/mainfrm.cc:1106
#: n:377
msgid "Presentation"
msgstr "演示文档"

#. TRANSLATORS: In aven's survey tree, right-clicking on the root
#. gives a pop-up menu and this is an option (but only enabled if
#. the view is restricted to a subsurvey). It reloads the current
#. survey file with the who survey visible.
#: ../src/aventreectrl.cc:367
#: n:245
msgid "Show all"
msgstr "显示全部"

#. TRANSLATORS: In aven's survey tree, right-clicking on a survey
#. name gives a pop-up menu and this is an option.  It reloads the
#. current survey file with the view restricted to the survey
#. clicked upon.
#: ../src/aventreectrl.cc:385
#: n:246
msgid "Hide others"
msgstr "隐藏其他"

#: ../src/aventreectrl.cc:389
#: n:388
msgid "Hide si&blings"
msgstr ""

#: ../src/mainfrm.cc:241
#: ../src/pos.cc:87
#: n:378
msgid "Easting"
msgstr "向东"

#: ../src/mainfrm.cc:242
#: ../src/pos.cc:88
#: n:379
msgid "Northing"
msgstr "向北"

#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
#. accelerator key.
#.
#. The string "\t" separates the menu text and any accelerator key.
#.
#. "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:753
#: n:220
msgid "&Open...\tCtrl+O"
msgstr "打开(&O)...\tCtrl+O"

#. TRANSLATORS: Open a "Terrain file" - i.e. a digital model of the
#. terrain.
#: ../src/mainfrm.cc:756
#: n:453
msgid "Open &Terrain..."
msgstr "打开地形...(&T)"

#. TRANSLATORS: This is a menu item which allows displaying a GPX, KML,
#. shapefile, etc over the survey in Aven.
#: ../src/mainfrm.cc:757
#: n:494
msgid "Overlay &Geodata..."
msgstr ""

#: ../src/mainfrm.cc:758
#: n:144
msgid "Show &Log"
msgstr "显示日志(&L)"

#: ../src/mainfrm.cc:761
#: n:380
msgid "&Print...\tCtrl+P"
msgstr "打印(&P)...\tCtrl+P"

#: ../src/mainfrm.cc:762
#: n:381
msgid "P&age Setup..."
msgstr "页面设置(&a)..."

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:765
#: n:201
msgid "&Screenshot..."
msgstr "截图(&S)..."

#. TRANSLATORS: In the "File" menu - c.f. n:191
#: ../src/mainfrm.cc:768
#: n:247
msgid "E&xtended Elevation..."
msgstr ""

#: ../src/mainfrm.cc:766
#: n:382
msgid "&Export as..."
msgstr ""

#. TRANSLATORS: Title of file dialog to choose name and type of exported
#. file.
#: ../src/printing.cc:650
#: n:401
msgid "Export as:"
msgstr ""

#. TRANSLATORS: Title of the export
#. dialog
#: ../src/printing.cc:316
#: n:383
msgid "Export"
msgstr "导出"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:139
#: n:390
msgid "System Information:"
msgstr ""

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printing.cc:697
#: n:398
msgid "Print Preview"
msgstr "打印预览"

#. TRANSLATORS: Title of the print
#. dialog
#: ../src/printing.cc:313
#: n:399
msgid "Print"
msgstr "打印"

#: ../src/printing.cc:581
#: n:400
msgid "&Print..."
msgstr "打印(&P)..."

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printing.cc:484
#: n:403
msgid "Sur&face Survey Legs"
msgstr ""

#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:129
#: n:404
msgid "Edit Waypoint"
msgstr "编辑航点"

#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
#. in a presentation.
#: ../src/mainfrm.cc:168
#: n:278
msgid " (unused in perspective view)"
msgstr ""

#. TRANSLATORS: Field label in dialog to edit a waypoint in a
#. presentation.
#: ../src/mainfrm.cc:175
#: n:279
msgid "Time: "
msgstr "时间： "

#. TRANSLATORS: units+info after time field in dialog to edit a
#. waypoint in a presentation.
#: ../src/mainfrm.cc:179
#: n:282
#, fuzzy
msgid " secs (0 = auto; *6 = 6 times auto)"
msgstr " 秒 (0 = 自动; *6 = 6 times 自动)"

#. TRANSLATORS: %s will be replaced with "Aven" currently (and
#. perhaps by "Survex" or other things in future).
#: ../src/aven.cc:305
#: n:405
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn’t available."
msgstr "此版本的%s运行需要的OpenGL不可用。"

#: ../src/readval.c:357
#: n:392
msgid "Separator in survey name"
msgstr ""

#. TRANSLATORS: Used in place of the station name when talking about an
#. anonymous station.
#: ../src/labelinfo.h:102
#: n:56
msgid "anonymous station"
msgstr ""

#: ../src/readval.c:115
#: ../src/readval.c:131
#: ../src/readval.c:149
#: ../src/readval.c:413
#: n:47
msgid "Can't have a leg between two anonymous stations"
msgstr ""

#: ../src/mainfrm.cc:850
#: ../src/printing.cc:488
#: n:406
msgid "Spla&y Legs"
msgstr ""

#: ../src/survexport.cc:145
#: n:465
msgid "splay legs"
msgstr ""

#: ../src/mainfrm.cc:857
#: n:251
msgid "&Duplicate Legs"
msgstr ""

#. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
#. this is selected, such legs are not shown.
#: ../src/aventreectrl.cc:387
#: ../src/mainfrm.cc:840
#: ../src/mainfrm.cc:853
#: n:407
msgid "&Hide"
msgstr "隐藏(&H)"

#. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
#. this is selected, aven will show such legs with less bright colours.
#: ../src/mainfrm.cc:846
#: ../src/mainfrm.cc:855
#: n:408
msgid "&Fade"
msgstr ""

#. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
#. this is selected, aven will show such legs with dashed lines.
#: ../src/mainfrm.cc:843
#: ../src/mainfrm.cc:854
#: n:250
msgid "&Dashed"
msgstr ""

#. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
#. this is selected, such legs are shown the same as other legs.
#: ../src/aventreectrl.cc:388
#: ../src/mainfrm.cc:849
#: ../src/mainfrm.cc:856
#: n:409
msgid "&Show"
msgstr "显示(&S)"

#: ../src/extend.c:594
#: n:105
msgid "Reading in data - please wait…"
msgstr ""

#. TRANSLATORS: for extend: the user specified breaking a loop or
#. changing extend direction at this station, but we didn’t find it in
#. the 3d file
#: ../src/extend.c:284
#: ../src/extend.c:303
#: ../src/extend.c:349
#: ../src/extend.c:392
#: ../src/extend.c:435
#: n:510
#, c-format
msgid "Failed to find station %s"
msgstr ""

#. TRANSLATORS: for extend: the user specified breaking a loop or
#. changing extend direction at this leg, but we didn’t find it in the
#. 3d file
#: ../src/extend.c:329
#: ../src/extend.c:372
#: ../src/extend.c:415
#: ../src/extend.c:459
#: n:511
#, c-format
msgid "Failed to find leg %s → %s"
msgstr ""

#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:275
#: n:512
#, c-format
msgid "Starting from station %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:296
#: n:513
#, c-format
msgid "Extending to the left from station %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:342
#: n:514
#, c-format
msgid "Extending to the right from station %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:316
#: n:515
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:362
#: n:516
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:428
#: n:517
#, c-format
msgid "Breaking survey loop at station %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:449
#: n:518
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:385
#: n:519
#, c-format
msgid "Swapping extend direction from station %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:405
#: n:520
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr ""

#. TRANSLATORS: for extend:
#: ../src/extend.c:688
#: n:521
#, c-format
msgid "Applying specfile: “%s”"
msgstr ""

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:712
#: n:522
#, c-format
msgid "Writing %s…"
msgstr ""

#. TRANSLATORS: --help output for sorterr --horizontal option
#: ../src/sorterr.c:50
#: n:179
msgid "sort by horizontal error factor"
msgstr ""

#. TRANSLATORS: --help output for sorterr --vertical option
#: ../src/sorterr.c:52
#: n:180
msgid "sort by vertical error factor"
msgstr ""

#. TRANSLATORS: --help output for sorterr --percentage option
#: ../src/sorterr.c:54
#: n:181
msgid "sort by percentage error"
msgstr ""

#. TRANSLATORS: --help output for sorterr --per-leg option
#: ../src/sorterr.c:56
#: n:182
msgid "sort by error per leg"
msgstr ""

#. TRANSLATORS: --help output for sorterr --replace option
#: ../src/sorterr.c:58
#: n:183
msgid "replace .err file with re-sorted version"
msgstr ""

#: ../src/sorterr.c:78
#: ../src/sorterr.c:95
#: ../src/sorterr.c:167
#: n:112
msgid "Couldn’t parse .err file"
msgstr ""

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:158
#: n:500
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr ""

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:195
#: n:501
#, c-format
msgid "Added: %s"
msgstr "已添加：%s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:218
#: n:502
#, c-format
msgid "Deleted: %s"
msgstr "已删除：%s"

#. TRANSLATORS: The first of two warnings given when a survey which has
#. already been completed is reentered.  This example file crawl.svx:
#.
#. *begin crawl     ; <- second warning here
#. 1 2 9.45 234 -01
#. *end crawl
#. *begin crawl     ; <- first warning here
#. 2 3 7.67 223 -03
#. *end crawl
#.
#. Would lead to:
#.
#. crawl.svx:4:8: warning: Reentering an existing survey is deprecated
#. crawl.svx:1: info: Originally entered here
#.
#. If you're unsure what "deprecated" means, see:
#. https://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:787
#: n:29
msgid "Reentering an existing survey is deprecated"
msgstr ""

#. TRANSLATORS: The second of two warnings given when a survey which has
#. already been completed is reentered.  This example file crawl.svx:
#.
#. *begin crawl     ; <- second warning here
#. 1 2 9.45 234 -01
#. *end crawl
#. *begin crawl     ; <- first warning here
#. 2 3 7.67 223 -03
#. *end crawl
#.
#. Would lead to:
#.
#. crawl.svx:4:8: warning: Reentering an existing survey is deprecated
#. crawl.svx:1: info: Originally entered here
#.
#. If you're unsure what "deprecated" means, see:
#. https://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:806
#: n:30
msgid "Originally entered here"
msgstr ""

#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
#. END command omits it, e.g.:
#.
#. *begin entrance
#. 1 2 10.00 178 -01
#. *end
#.
#. gives:
#.
#. eg.svx:3: warning: Survey name omitted from END
#. eg.svx:1: info: Corresponding BEGIN was here
#: ../src/commands.c:1123
#: n:22
#, c-format
msgid "Corresponding %s was here"
msgstr ""

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
#. deprecated, so this warning would be generated by:
#.
#. *equate \foo.7 1
#.
#. If you're unsure what "deprecated" means, see:
#. https://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:693
#: ../src/readval.c:81
#: ../src/readval.c:85
#: n:25
msgid "ROOT is deprecated"
msgstr ""

#. TRANSLATORS: --help output for dump3d --rewind option
#: ../src/dump3d.c:50
#: n:204
msgid "rewind file and read it a second time"
msgstr ""

#: ../src/dump3d.c:51
#: n:396
msgid "show survey date information (if present)"
msgstr ""

#: ../src/dump3d.c:52
#: n:509
msgid "equivalent to --show-dates=-"
msgstr ""

#: ../src/dump3d.c:53
#: n:486
msgid "convert MOVE and LINE into LEG"
msgstr ""

#: ../src/gpx.cc:86
#: ../src/kml.cc:85
#: n:287
#, c-format
msgid "Failed to initialise input coordinate system “%s”"
msgstr ""

#: ../src/gfxcore.cc:3056
#: n:288
#, c-format
msgid "Failed to initialise output coordinate system “%s”"
msgstr ""

#. TRANSLATORS: %s is replaced by the name of a geodata
#. file, e.g. GPX, KML.
#: ../src/gfxcore.cc:4607
#: ../src/gfxcore.cc:4624
#: n:492
#, c-format
msgid "File “%s” not georeferenced"
msgstr ""

#: ../src/survexport.cc:158
#: n:148
#, c-format
msgid "generate grid (default %sm)"
msgstr ""

#: ../src/survexport.cc:159
#: n:149
#, c-format
msgid "station labels text height (default %s)"
msgstr ""

#: ../src/survexport.cc:160
#: n:152
#, c-format
msgid "station marker size (default %s)"
msgstr ""

#: ../src/survexport.cc:161
#: n:487
msgid "produce Survex 3d output"
msgstr ""

#: ../src/survexport.cc:162
#: n:102
msgid "produce CSV output"
msgstr ""

#: ../src/survexport.cc:163
#: n:156
msgid "produce DXF output"
msgstr ""

#: ../src/survexport.cc:164
#: n:454
msgid "produce EPS output"
msgstr ""

#: ../src/survexport.cc:165
#: n:455
msgid "produce GPX output"
msgstr ""

#: ../src/survexport.cc:166
#: n:456
msgid "produce HPGL output"
msgstr ""

#: ../src/survexport.cc:167
#: n:457
msgid "produce JSON output"
msgstr ""

#: ../src/survexport.cc:168
#: n:458
msgid "produce KML output"
msgstr ""

#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
#. so should not be translated.
#: ../src/survexport.cc:171
#: n:159
msgid "produce Compass PLT output for Carto"
msgstr ""

#: ../src/survexport.cc:172
#: n:459
msgid "produce Survex POS output"
msgstr ""

#: ../src/survexport.cc:173
#: n:525
msgid "produce Shapefile (lines) output"
msgstr ""

#: ../src/survexport.cc:174
#: n:526
msgid "produce Shapefile (points) output"
msgstr ""

#: ../src/survexport.cc:175
#: n:160
msgid "produce SVG output"
msgstr ""

#: ../src/survexport.cc:411
#: n:252
msgid "Export format not specified and not known from output file extension"
msgstr ""

#: ../src/survexport.cc:416
#: n:253
msgid "Export format not specified"
msgstr ""

#: ../src/survexport.cc:157
#: n:155
msgid "include items exported by default"
msgstr ""

#: ../src/datain.c:2515
#: n:499
#, c-format
msgid "Macro “%s” not defined"
msgstr ""

#: ../src/datain.c:2244
#: ../src/datain.c:2276
#: ../src/datain.c:2296
#: ../src/datain.c:4349
#: n:506
#, c-format
msgid "Ignoring “%s”"
msgstr ""

#. TRANSLATORS: Warning issued about a dubious case in survey data in
#. Walls format (.srv).  Real world example:
#.
#. P25      *8 5 15 3.58
#.
#. This is treated by Walls as a leg from P25 to *8 but seems likely
#. to be intended to be an isolated LRUD reading (one not on a survey
#. leg, useful for the start or end of a traverse) but the closing *
#. was missed (or perhaps in this particular case, mistyped as an 8
#. by failing to press shift), so Survex issues a warning about it.
#: ../src/datain.c:4453
#: n:508
msgid "Parsing as “to” station but may be isolated LRUD with missing closing delimiter"
msgstr ""

#: ../src/gdalexport.cc:47
#: ../src/gdalexport.cc:53
#: n:527
#, c-format
msgid "Failed to initialise GDAL “%s” driver"
msgstr ""

#: ../src/gdalexport.cc:142
#: n:528
msgid "Failed to create GDAL layer"
msgstr ""

#: ../src/gdalexport.cc:152
#: n:529
msgid "Failed to create GDAL field"
msgstr ""

#: ../src/gdalexport.cc:189
#: ../src/gdalexport.cc:207
#: n:530
msgid "Failed to create GDAL feature"
msgstr ""

#, c-format
#~ msgid "Error in format of font file “%s”"
#~ msgstr ""

#. TRANSLATORS: Show the terrain as solid rather than transparent.
#~ msgid "Solid Su&rface"
#~ msgstr ""

#. TRANSLATORS: number of stations found matching search
#, c-format
#~ msgid "%d found"
#~ msgstr ""

#: ../src/mainfrm.cc:913
#: n:347
#~ msgid "&Preferences..."
#~ msgstr "首选项(&P)..."

#: n:348
#~ msgid "Draw passage walls"
#~ msgstr ""

#: n:349
#~ msgid "Estimate LRUD readings based on heuristics"
#~ msgstr "基于启发法估计左右上下读数"

#: n:350
#~ msgid "Mark survey stations with crosses"
#~ msgstr ""

#: n:351
#~ msgid "Highlight stations marked as entrances"
#~ msgstr "突出显示标记为入口的站"

#: n:352
#~ msgid "Highlight stations marked as fixed points"
#~ msgstr "突出显示标记为固定点的站"

#: n:353
#~ msgid "Highlight stations which are exported"
#~ msgstr ""

#: n:354
#~ msgid "Mark survey stations with their names"
#~ msgstr "使用站名标记测量站"

#: n:355
#~ msgid "Allow names to overlap on the display (faster)"
#~ msgstr "允许名称在显示时重叠（更快）"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:357
#~ msgid "Display underground survey legs"
#~ msgstr "显示地下测量段"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:358
#~ msgid "Display surface survey legs"
#~ msgstr "显示地表测量段"

#: n:359
#~ msgid "Colour surface surveys by depth"
#~ msgstr "地表颜色按深度渲染"

#: n:360
#~ msgid "Draw surface legs with dashed lines"
#~ msgstr "使用虚线画地表测量段"

#: n:361
#~ msgid "Draw a grid"
#~ msgstr "绘制网格"

#: n:362
#~ msgid "metric units"
#~ msgstr "公制单位"

#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
#. the USA (rather confusingly now that England has largely gone metric!)
#: n:363
#~ msgid "imperial units"
#~ msgstr "英制单位"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: n:364
#~ msgid "degrees (°)"
#~ msgstr "度（°）"

#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
#. full circle.
#: n:365
#~ msgid "grads"
#~ msgstr ""

#: n:366
#~ msgid "Display measurements in"
#~ msgstr ""

#: n:367
#~ msgid "Display angles in"
#~ msgstr "角度显示为"

#. TRANSLATORS: reverses the sense of the mouse controls
#: n:368
#~ msgid "Reverse the sense of the controls"
#~ msgstr ""

#: n:369
#~ msgid "Display scale bar"
#~ msgstr "显示比例尺"

#: n:370
#~ msgid "Display depth bar"
#~ msgstr "显示深度栏"

#: n:371
#~ msgid "Display compass"
#~ msgstr "显示罗盘"

#: n:372
#~ msgid "Display clinometer"
#~ msgstr ""

#: n:373
#~ msgid "Display side panel"
#~ msgstr "显示侧面板"

#: n:440
#~ msgid "Coordinate projection"
#~ msgstr ""