source: git/lib/zh_CN.po @ e9988b3

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data
Last change on this file since e9988b3 was e9988b3, checked in by Olly Betts <olly@…>, 10 years ago

lib/: More translation updates.

  • Property mode set to 100644
File size: 61.0 KB
Line 
1msgid ""
2msgstr ""
3"Project-Id-Version: survex\n"
4"Report-Msgid-Bugs-To: olly@survex.com\n"
5"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
7"Last-Translator: Olly Betts <olly@survex.com>\n"
8"Language-Team: \n"
9"MIME-Version: 1.0\n"
10"Content-Type: text/plain; charset=utf-8\n"
11"Content-Transfer-Encoding: 8bit\n"
12"Language: zh_CN\n"
13
14#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
15#. allocate space for.
16#: ../src/message.c:83
17#: n:1
18#, c-format
19msgid "Out of memory (couldn’t find %lu bytes)."
20msgstr ""
21
22#. TRANSLATORS: Feel free to translate as "or newer" instead of "or greater" if that
23#. gives a more natural translation.  It's technically not quite right when there are
24#. parallel active release series (e.g. Survex 1.0.40 was released *after* 1.2.0), but
25#. this seems unlikely to confuse users.
26#: ../src/commands.c:1567
27#: n:2
28#, c-format
29msgid "Survex version %s or greater required to process this survey data."
30msgstr ""
31
32#. TRANSLATORS: Indicates a warning message e.g.:
33#. "spoon.svx:12: warning: *prefix is deprecated"
34#: ../src/aven.cc:365
35#: ../src/message.c:1235
36#: n:4
37msgid "warning"
38msgstr "警告"
39
40#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u by
41#. the line number in that file.
42#: ../src/datain.c:105
43#: n:5
44#, c-format
45msgid "In file included from %s:%u:\n"
46msgstr ""
47
48#. TRANSLATORS: If you're unsure what "deprecated" means, see:
49#. http://en.wikipedia.org/wiki/Deprecation
50#: ../src/commands.c:535
51#: n:6
52msgid "*prefix is deprecated - use *begin and *end instead"
53msgstr ""
54
55#. TRANSLATORS: Here "station" is a survey station, not a train station.
56#: ../src/readval.c:205
57#: n:7
58#, c-format
59msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
60msgstr ""
61
62#: ../src/readval.c:384
63#: n:8
64msgid "Field may not be omitted"
65msgstr ""
66
67#: ../src/datain.c:1469
68#: ../src/datain.c:1749
69#: ../src/readval.c:386
70#: ../src/readval.c:427
71#: ../src/readval.c:457
72#: n:9
73#, c-format
74msgid "Expecting numeric field, found “%s”"
75msgstr ""
76
77#: ../src/commands.c:1473
78#: n:10
79#, c-format
80msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
81msgstr ""
82
83#: ../src/debug.h:45
84#: ../src/debug.h:47
85#: ../src/matrix.c:352
86#: ../src/message.c:233
87#: n:11
88msgid "Bug in program detected! Please report this to the authors"
89msgstr ""
90
91#: ../src/commands.c:1681
92#: ../src/extend.c:420
93#: n:12
94#, c-format
95msgid "Unknown command “%s”"
96msgstr ""
97
98#. TRANSLATORS: Here "station" is a survey station, not a train station.
99#: ../src/netbits.c:401
100#: n:13
101#, c-format
102msgid "Station “%s” equated to itself"
103msgstr ""
104
105#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between survey stations.
106#: ../src/datain.c:997
107#: n:14
108msgid "Compass reading may not be omitted except on plumbed legs"
109msgstr ""
110
111#: ../src/datain.c:244
112#: ../src/extend.c:425
113#: n:15
114msgid "End of line not blank"
115msgstr ""
116
117#: ../src/cavern.c:385
118#: n:16
119#, c-format
120msgid "There were %d warning(s)."
121msgstr ""
122
123#. TRANSLATORS: %s is replaced by the command we attempted to run.
124#: ../src/cavernlog.cc:174
125#: ../src/cavernlog.cc:232
126#: n:17
127#, c-format
128msgid "Couldn’t run external command: “%s”"
129msgstr ""
130
131#: ../src/datain.c:80
132#: ../src/datain.c:88
133#: ../src/datain.c:95
134#: ../src/datain.c:730
135#: ../src/extend.c:541
136#: ../src/sorterr.c:75
137#: ../src/sorterr.c:92
138#: ../src/sorterr.c:234
139#: n:18
140msgid "Error reading file"
141msgstr "读文件出错"
142
143#: ../src/message.c:1250
144#: n:19
145msgid "Too many errors - giving up"
146msgstr ""
147
148#. TRANSLATORS: If you're unsure what "deprecated" means, see:
149#. http://en.wikipedia.org/wiki/Deprecation
150#: ../src/commands.c:1352
151#: n:20
152msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
153msgstr ""
154
155#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
156#. So the problem here is that the leg is vertical, so a compass reading has
157#. no meaning!
158#: ../src/datain.c:970
159#: n:21
160msgid "Compass reading given on plumbed leg"
161msgstr ""
162
163#: ../src/commands.c:619
164#: n:22
165msgid "END with no matching BEGIN in this file"
166msgstr ""
167
168#: ../src/datain.c:717
169#: n:23
170msgid "BEGIN with no matching END in this file"
171msgstr ""
172
173#: ../src/datain.c:361
174#: ../src/img_hosted.c:30
175#: ../src/printwx.cc:1457
176#: n:24
177#, c-format
178msgid "Couldn’t open data file “%s”"
179msgstr ""
180
181#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
182#. deprecated, so this error would be generated by:
183#.
184#. *equate \foo.7 1
185#.
186#. If you're unsure what "deprecated" means, see:
187#. http://en.wikipedia.org/wiki/Deprecation
188#: ../src/commands.c:444
189#: ../src/readval.c:90
190#: ../src/readval.c:94
191#: n:25
192msgid "ROOT is deprecated"
193msgstr ""
194
195#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
196#. "Station “\outer.inner.1” not exported from survey “\outer”)":
197#. *equate entrance outer.inner.1
198#. *begin outer
199#. *begin inner
200#. *export 1
201#. 1 2 1.23 045 -6
202#. *end inner
203#. *end outer
204#: ../src/commands.c:861
205#: ../src/listpos.c:107
206#: ../src/readval.c:324
207#: n:26
208#, c-format
209msgid "Station “%s” not exported from survey “%s”"
210msgstr ""
211
212#. TRANSLATORS: This error occurs if there's an attempt to export a station
213#. from a survey which doesn't actually exist.
214#: ../src/listpos.c:110
215#: n:286
216#, c-format
217msgid "Reference to station “%s” from non-existent survey “%s”"
218msgstr ""
219
220#: ../src/readval.c:296
221#: n:27
222#, c-format
223msgid "“%s” can’t be both a station and a survey"
224msgstr ""
225
226#: ../src/extend.c:247
227#: ../src/extend.c:262
228#: ../src/extend.c:302
229#: ../src/extend.c:342
230#: ../src/extend.c:382
231#: ../src/readval.c:202
232#: n:28
233msgid "Expecting station name"
234msgstr ""
235
236#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
237#.
238#. If you're unsure what "deprecated" means, see:
239#. http://en.wikipedia.org/wiki/Deprecation
240#: ../src/commands.c:507
241#: n:29
242msgid "Reentering an existing prefix level is deprecated"
243msgstr ""
244
245#: ../src/commands.c:514
246#: n:30
247msgid "Originally entered here"
248msgstr ""
249
250#: ../src/commands.c:1503
251#: n:31
252#, c-format
253msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
254msgstr ""
255
256#: ../src/commands.c:1510
257#: n:32
258#, c-format
259msgid "Found “%s”, expecting “ON” or “OFF”"
260msgstr ""
261
262#. TRANSLATORS: EQUATE is a command name, so shouldn’t be translated.
263#: ../src/commands.c:834
264#: n:33
265msgid "Only one station in EQUATE command"
266msgstr ""
267
268#: ../src/commands.c:398
269#: n:34
270#, c-format
271msgid "Unknown quantity “%s”"
272msgstr ""
273
274#: ../src/commands.c:318
275#: n:35
276#, c-format
277msgid "Unknown units “%s”"
278msgstr ""
279
280#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
281#. *begin
282#. 1 2 10.00 178 -01
283#. *end entrance      <--[Message given here]
284#: ../src/commands.c:636
285#: n:36
286msgid "Matching BEGIN tag has no prefix"
287msgstr ""
288
289#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
290#. the correct term in other languages may be singular.
291#: ../src/commands.c:328
292#: n:37
293#, c-format
294msgid "Invalid units “%s” for quantity"
295msgstr ""
296
297#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
298#. a filename parameter - we don’t really want it here, so lose it with "%.0s"
299#. (which should display 0 characters from the filename) FIXME: sort out this
300#: ../src/img_hosted.c:31
301#: n:38
302msgid "Out of memory %.0s"
303msgstr ""
304
305#: ../src/commands.c:391
306#: n:39
307#, c-format
308msgid "Unknown instrument “%s”"
309msgstr ""
310
311#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
312#: ../src/commands.c:1324
313#: n:40
314msgid "Scale factor must be 1.0 for DECLINATION"
315msgstr ""
316
317#. TRANSLATORS: If the scale factor for an instrument is zero, then any reading
318#. would be mapped to zero, which doesn't make sense.
319#: ../src/commands.c:1328
320#: n:391
321msgid "Scale factor must be non-zero"
322msgstr ""
323
324#: ../src/commands.c:1371
325#: n:41
326#, c-format
327msgid "Unknown setting “%s”"
328msgstr ""
329
330#: ../src/commands.c:436
331#: n:42
332#, c-format
333msgid "Unknown character class “%s”"
334msgstr ""
335
336#: ../src/extend.c:587
337#: ../src/netskel.c:90
338#: n:43
339msgid "No survey data"
340msgstr ""
341
342#: ../src/filename.c:52
343#: ../src/img_hosted.c:32
344#: n:44
345#, c-format
346msgid "Filename “%s” refers to directory"
347msgstr ""
348
349#: ../src/netartic.c:384
350#: n:45
351msgid "Survey not all connected to fixed stations"
352msgstr ""
353
354#: ../src/commands.c:770
355#: ../src/datain.c:643
356#: n:46
357msgid "Station already fixed or equated to a fixed point"
358msgstr ""
359
360#: ../src/cavern.c:288
361#: ../src/filename.c:55
362#: ../src/img_hosted.c:33
363#: n:47
364#, c-format
365msgid "Failed to open output file “%s”"
366msgstr ""
367
368#: ../src/commands.c:1426
369#: n:48
370msgid "Standard deviation must be positive"
371msgstr ""
372
373#. TRANSLATORS: as in: Usage: cavern …
374#: ../src/cmdline.c:165
375#: n:49
376msgid "Usage"
377msgstr "使用"
378
379#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
380#. "survey stations".
381#.
382#. %s is replaced by the name of the station.
383#: ../src/netbits.c:329
384#: n:50
385#, c-format
386msgid "Survey leg with same station (“%s”) at both ends - typing error?"
387msgstr ""
388
389#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
390#. full circle.
391#: ../src/datain.c:923
392#: ../src/datain.c:931
393#: ../src/datain.c:943
394#: n:51
395msgid "Clino reading over 90 degrees (absolute value)"
396msgstr ""
397
398#: ../src/netbits.c:416
399#: n:52
400#, c-format
401msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
402msgstr ""
403
404#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
405#: ../src/netbits.c:422
406#: n:53
407#, c-format
408msgid "Equating two equal fixed points: “%s” and “%s”"
409msgstr ""
410
411#. TRANSLATORS: " *fix a " gives this message:
412#: ../src/commands.c:693
413#: n:54
414msgid "FIX command with no coordinates - fixing at (0,0,0)"
415msgstr ""
416
417#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
418#: ../src/commands.c:773
419#: ../src/datain.c:645
420#: n:55
421msgid "Station already fixed at the same coordinates"
422msgstr ""
423
424#: ../src/commands.c:686
425#: n:56
426msgid "More than one FIX command with no coordinates"
427msgstr ""
428
429#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
430#. would generate error 57:
431#. *begin fred
432#. 1 2 1.23 045 -6
433#. *export 2
434#. *end fred
435#: ../src/commands.c:1688
436#: n:57
437msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
438msgstr ""
439
440#: ../src/readval.c:514
441#: n:58
442msgid "Invalid year (< 1900 or > 2078)"
443msgstr ""
444
445#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
446#: ../src/datain.c:825
447#: ../src/datain.c:834
448#: n:59
449msgid "Suspicious compass reading"
450msgstr ""
451
452#: ../src/datain.c:1445
453#: n:60
454msgid "Negative tape reading"
455msgstr ""
456
457#: ../src/commands.c:688
458#: n:61
459msgid "Same station fixed twice with no coordinates"
460msgstr ""
461
462#. TRANSLATORS: This means that the data fed in said this.
463#. It could be a gross error (e.g. the decimal point is missing from
464#. the depth gauge reading) or it could just be due to random error on
465#. a near vertical leg
466#: ../src/datain.c:1144
467#: n:62
468msgid "Tape reading is less than change in depth"
469msgstr ""
470
471#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
472#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
473#. neither style nor reading is a keyword in the program
474#. This error complains about a depth gauge reading in normal style, for example
475#: ../src/commands.c:1069
476#: n:63
477#, c-format
478msgid "Reading “%s” not allowed in data style “%s”"
479msgstr ""
480
481#. TRANSLATORS: i.e. not enough readings for the style.
482#: ../src/commands.c:1238
483#: n:64
484#, c-format
485msgid "Too few readings for data style “%s”"
486msgstr ""
487
488#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
489#: ../src/commands.c:1034
490#: n:65
491#, c-format
492msgid "Data style “%s” unknown"
493msgstr ""
494
495#. TRANSLATORS: Here "station" is a survey station, not a train station.
496#.
497#. Exporting a station twice give error 66:
498#. *begin example
499#. *export 1
500#. *export 1
501#. 1 2 1.24 045 -6
502#. *end example
503#: ../src/commands.c:905
504#: n:66
505#, c-format
506msgid "Station “%s” already exported"
507msgstr ""
508
509#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
510#: ../src/commands.c:1089
511#: n:67
512#, c-format
513msgid "Duplicate reading “%s”"
514msgstr ""
515
516#: ../src/commands.c:800
517#: n:68
518#, c-format
519msgid "FLAG “%s” unknown"
520msgstr ""
521
522#: ../src/readval.c:471
523#: n:69
524msgid "Missing \""
525msgstr ""
526
527#. TRANSLATORS: Here "station" is a survey station, not a train station.
528#: ../src/listpos.c:121
529#: n:70
530#, c-format
531msgid "Station “%s” referred to just once, with an explicit prefix - typo?"
532msgstr ""
533
534#. TRANSLATORS: Here "station" is a survey station, not a train station.
535#: ../src/netartic.c:394
536#: n:71
537msgid "The following survey stations are not attached to a fixed point:"
538msgstr ""
539
540#: ../src/netskel.c:129
541#: n:72
542#, c-format
543msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
544msgstr ""
545
546#. TRANSLATORS: fixed survey station that is not part of any survey
547#: ../src/netskel.c:919
548#: n:73
549#, c-format
550msgid "Unused fixed point “%s”"
551msgstr ""
552
553#: ../src/matrix.c:123
554#: n:74
555msgid "Network solved by reduction - no simultaneous equations to solve."
556msgstr ""
557
558#: ../src/matrix.c:134
559#: n:75
560#, c-format
561msgid "Solving %d simultaneous equations"
562msgstr ""
563
564#: ../src/commands.c:1146
565#: n:77
566#, c-format
567msgid "Reading “%s” duplicates previous reading(s)"
568msgstr ""
569
570#: ../src/matrix.c:132
571#: n:78
572msgid "Solving one equation"
573msgstr ""
574
575#: ../src/datain.c:896
576#: ../src/datain.c:1138
577#: ../src/datain.c:1326
578#: n:79
579msgid "Negative adjusted tape reading"
580msgstr ""
581
582#: ../src/commands.c:1604
583#: ../src/commands.c:1624
584#: n:80
585msgid "Date is in the future!"
586msgstr ""
587
588#: ../src/commands.c:1628
589#: n:81
590msgid "End of date range is before the start"
591msgstr ""
592
593#: ../src/avenprcore.cc:125
594#: n:82
595#, c-format
596msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
597msgstr ""
598
599#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
600#. there is no station "entrance.27" in the centre-line.
601#: ../src/netskel.c:1004
602#: n:83
603#, c-format
604msgid "Cross section specified at non-existent station “%s”"
605msgstr ""
606
607#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
608#. foresight and a clino reading for the backsight, or something similar.
609#: ../src/datain.c:957
610#: ../src/datain.c:978
611#: n:84
612msgid "CLINO and BACKCLINO readings must be of the same type"
613msgstr ""
614
615#: ../src/avenprcore.cc:120
616#: n:85
617#, c-format
618msgid "Parameter “%s” missing in printer configuration file"
619msgstr ""
620
621#: ../src/readval.c:522
622#: n:86
623msgid "Invalid month"
624msgstr ""
625
626#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
627#: ../src/readval.c:530
628#: n:87
629msgid "Invalid day of the month"
630msgstr ""
631
632#: ../src/cavern.c:237
633#: n:88
634#, c-format
635msgid "3d file format versions %d to %d supported"
636msgstr ""
637
638#, c-format
639#~ msgid "Error in format of font file “%s”"
640#~ msgstr ""
641
642#: ../src/readval.c:200
643#: n:89
644msgid "Expecting survey name"
645msgstr ""
646
647#. TRANSLATORS: Program will exit shortly after printing this
648#: ../src/message.c:224
649#: n:90
650msgid "Abnormal termination"
651msgstr ""
652
653#: ../src/message.c:225
654#: n:91
655msgid "Arithmetic error"
656msgstr ""
657
658#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
659#: ../src/message.c:226
660#: n:92
661msgid "Illegal instruction"
662msgstr "非法指令"
663
664#: ../src/extend.c:536
665#: ../src/mainfrm.cc:395
666#: ../src/sorterr.c:140
667#: n:93
668#, c-format
669msgid "Couldn’t open file “%s”"
670msgstr ""
671
672#: ../src/printwx.cc:587
673#: n:402
674#, c-format
675msgid "Couldn’t write file “%s”"
676msgstr ""
677
678#: ../src/message.c:227
679#: n:94
680msgid "Bad memory access"
681msgstr ""
682
683#. TRANSLATORS: If you're unsure what "deprecated" means, see:
684#. http://en.wikipedia.org/wiki/Deprecation
685#: ../src/commands.c:446
686#: ../src/commands.c:509
687#: ../src/commands.c:537
688#: ../src/commands.c:1049
689#: ../src/commands.c:1354
690#: ../src/readval.c:96
691#: n:95
692msgid "Further uses of this deprecated feature will not be reported"
693msgstr ""
694
695#: ../src/message.c:228
696#: n:97
697msgid "Unknown signal received"
698msgstr ""
699
700#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
701#. full circle.
702#: ../src/datain.c:862
703#: n:98
704#, c-format
705msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
706msgstr ""
707
708#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
709#. full circle.
710#: ../src/datain.c:1026
711#: n:99
712#, c-format
713msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
714msgstr ""
715
716#: ../src/cad3d.c:629
717#: n:100
718msgid "do not generate station markers"
719msgstr ""
720
721#: ../src/cad3d.c:630
722#: n:101
723msgid "do not generate station labels"
724msgstr ""
725
726#: ../src/cad3d.c:631
727#: n:102
728msgid "do not generate survey legs"
729msgstr ""
730
731#: ../src/cad3d.c:635
732#: n:103
733msgid "produce an elevation view"
734msgstr ""
735
736#: ../src/commands.c:1046
737#: n:104
738#, c-format
739msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
740msgstr ""
741
742#: ../src/extend.c:490
743#: n:105
744msgid "Reading in data - please wait…"
745msgstr ""
746
747#. TRANSLATORS: Perhaps the user tried to load a different type of file as a
748#. Survex .3d file, or the .3d file was corrupted.
749#: ../src/3dtopos.c:154
750#: ../src/3dtopos.c:160
751#: ../src/cad3d.c:873
752#: ../src/cad3d.c:884
753#: ../src/img_hosted.c:34
754#: n:106
755#, c-format
756msgid "Bad 3d image file “%s”"
757msgstr ""
758
759#. TRANSLATORS: This is the date format string used to timestamp .3d files
760#. internally.  Probably best to keep it the same for all translations.
761#: ../src/img.c:43
762#: ../src/mainfrm.cc:1358
763#: n:107
764#, c-format
765msgid "%a,%Y.%m.%d %H:%M:%S %Z"
766msgstr ""
767
768#. TRANSLATORS: put in .3d file if we can’t read the date/time
769#: ../src/mainfrm.cc:1354
770#: n:108
771msgid "Date and time not available."
772msgstr ""
773
774#: ../src/img_hosted.c:35
775#: n:109
776#, c-format
777msgid "Error reading from file “%s”"
778msgstr ""
779
780#: ../src/filename.c:79
781#: ../src/img_hosted.c:36
782#: ../src/mainfrm.cc:353
783#: ../src/mainfrm.cc:1848
784#: n:110
785#, c-format
786msgid "Error writing to file “%s”"
787msgstr ""
788
789#: ../src/filename.c:82
790#: n:111
791msgid "Error writing to file"
792msgstr "写入文件出错"
793
794#: ../src/sorterr.c:76
795#: ../src/sorterr.c:93
796#: ../src/sorterr.c:164
797#: n:112
798msgid "Couldn’t parse .err file"
799msgstr ""
800
801#: ../src/cavern.c:380
802#: n:113
803#, c-format
804msgid "There were %d warning(s) and %d error(s) - no output files produced."
805msgstr ""
806
807#: ../src/img_hosted.c:37
808#: n:114
809#, c-format
810msgid "File “%s” has a newer format than this program can understand"
811msgstr ""
812
813#: ../src/printwx.cc:923
814#: n:115
815msgid "North"
816msgstr "北"
817
818#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
819#: ../src/printwx.cc:947
820#: n:116
821msgid "Elevation on"
822msgstr ""
823
824#: ../src/printwx.cc:419
825#: n:117
826msgid "P&lan view"
827msgstr ""
828
829#: ../src/printwx.cc:421
830#: n:285
831msgid "&Elevation"
832msgstr ""
833
834#: ../src/gfxcore.cc:692
835#: ../src/mainfrm.cc:141
836#: n:118
837msgid "Elevation"
838msgstr ""
839
840#: ../src/cavern.c:342
841#: n:120
842msgid "Calculating statistics"
843msgstr ""
844
845#: ../src/readval.c:485
846#: n:121
847msgid "Expecting string field"
848msgstr ""
849
850#: ../src/cmdline.c:208
851#: n:122
852msgid "too few arguments"
853msgstr "太少参数"
854
855#: ../src/cmdline.c:215
856#: n:123
857msgid "too many arguments"
858msgstr ""
859
860#: ../src/cmdline.c:174
861#: ../src/cmdline.c:177
862#: ../src/cmdline.c:181
863#: n:124
864msgid "FILE"
865msgstr "文件"
866
867#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
868#. "sequence" for the English "traverse", which makes sense (although toporobot
869#. actually uses this term to mean something more specific).  Feel free to
870#. follow this lead if you can't think of a better term - these messages mostly
871#. indicate how processing is progressing.
872#.
873#. A trailing traverse is a dead end back to a junction.
874#: ../src/netskel.c:163
875#: n:125
876msgid "Removing trailing traverses"
877msgstr ""
878
879#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
880#. "sequence" for the English "traverse", which makes sense (although toporobot
881#. actually uses this term to mean something more specific).  Feel free to
882#. follow this lead if you can't think of a better term - these messages mostly
883#. indicate how processing is progressing.
884#: ../src/netskel.c:217
885#: n:126
886msgid "Concatenating traverses"
887msgstr ""
888
889#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
890#. "sequence" for the English "traverse", which makes sense (although toporobot
891#. actually uses this term to mean something more specific).  Feel free to
892#. follow this lead if you can't think of a better term - these messages mostly
893#. indicate how processing is progressing.
894#: ../src/netskel.c:410
895#: n:127
896msgid "Calculating traverses"
897msgstr ""
898
899#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
900#. "sequence" for the English "traverse", which makes sense (although toporobot
901#. actually uses this term to mean something more specific).  Feel free to
902#. follow this lead if you can't think of a better term - these messages mostly
903#. indicate how processing is progressing.
904#.
905#. A trailing traverse is a dead end back to a junction.
906#: ../src/netskel.c:742
907#: n:128
908msgid "Calculating trailing traverses"
909msgstr ""
910
911#: ../src/network.c:82
912#: n:129
913msgid "Simplifying network"
914msgstr ""
915
916#: ../src/network.c:540
917#: n:130
918msgid "Calculating network"
919msgstr ""
920
921#: ../src/datain.c:1435
922#: n:131
923#, c-format
924msgid "Found “%s”, expecting “F” or “B”"
925msgstr ""
926
927#: ../src/cavern.c:438
928#: n:132
929#, c-format
930msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
931msgstr ""
932
933#: ../src/cavern.c:441
934#: n:133
935#, c-format
936msgid "Total plan length of survey legs = %7.2fm"
937msgstr ""
938
939#: ../src/cavern.c:444
940#: n:134
941#, c-format
942msgid "Total vertical length of survey legs = %7.2fm"
943msgstr ""
944
945#. TRANSLATORS: numbers are altitudes of highest and lowest stations
946#: ../src/cavern.c:450
947#: n:135
948#, c-format
949msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
950msgstr ""
951
952#. TRANSLATORS: c.f. previous message
953#: ../src/cavern.c:451
954#: n:136
955#, c-format
956msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
957msgstr ""
958
959#. TRANSLATORS: c.f. previous two messages
960#: ../src/cavern.c:452
961#: n:137
962#, c-format
963msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
964msgstr ""
965
966#: ../src/cavern.c:426
967#: n:138
968msgid "There is 1 loop."
969msgstr ""
970
971#: ../src/cavern.c:428
972#: n:139
973#, c-format
974msgid "There are %ld loops."
975msgstr ""
976
977#: ../src/cavern.c:364
978#: n:140
979#, c-format
980msgid "CPU time used %5.2fs"
981msgstr ""
982
983#: ../src/cavern.c:367
984#: n:141
985#, c-format
986msgid "Time used %5.2fs"
987msgstr ""
988
989#: ../src/cavern.c:369
990#: n:142
991msgid "Time used unavailable"
992msgstr ""
993
994#: ../src/cavern.c:372
995#: n:143
996#, c-format
997msgid "Time used %5.2fs (%5.2fs CPU time)"
998msgstr ""
999
1000#: ../src/cavern.c:376
1001#: n:144
1002msgid "Done."
1003msgstr "完成。"
1004
1005#: ../src/netskel.c:720
1006#: n:145
1007#, c-format
1008msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1009msgstr ""
1010
1011#: ../src/netskel.c:723
1012#: n:146
1013#, c-format
1014msgid "Error %6.2f%%"
1015msgstr ""
1016
1017#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
1018#. error per metre is meaningless
1019#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
1020#. the numbers in the message above.
1021#: ../src/netskel.c:725
1022#: n:147
1023msgid "Error    N/A"
1024msgstr ""
1025
1026#: ../src/cad3d.c:632
1027#: n:148
1028#, c-format
1029msgid "generate grid (default %sm)"
1030msgstr ""
1031
1032#: ../src/cad3d.c:633
1033#: n:149
1034#, c-format
1035msgid "station labels text height (default %s)"
1036msgstr ""
1037
1038#: ../src/cad3d.c:634
1039#: n:152
1040#, c-format
1041msgid "station marker size (default %s)"
1042msgstr ""
1043
1044#: ../src/cad3d.c:636
1045#: n:155
1046#, c-format
1047msgid "factor to scale down by (default %s)"
1048msgstr ""
1049
1050#: ../src/cad3d.c:637
1051#: n:156
1052msgid "produce DXF output"
1053msgstr ""
1054
1055#: ../src/cad3d.c:638
1056#: n:158
1057msgid "produce Skencil output"
1058msgstr ""
1059
1060#: ../src/cad3d.c:639
1061#: n:159
1062msgid "produce Compass PLT output for Carto"
1063msgstr ""
1064
1065#: ../src/cad3d.c:640
1066#: n:160
1067msgid "produce SVG output"
1068msgstr ""
1069
1070#. TRANSLATORS: description of --help option
1071#: ../src/cmdline.c:137
1072#: n:150
1073msgid "display this help and exit"
1074msgstr "显示该求助信息并退出"
1075
1076#. TRANSLATORS: description of --verbose option
1077#: ../src/cmdline.c:139
1078#: n:151
1079msgid "output version information and exit"
1080msgstr "显示版本信息并退出"
1081
1082#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1083#: ../src/cmdline.c:166
1084#: n:153
1085msgid "OPTION"
1086msgstr "选项"
1087
1088#: ../src/mainfrm.cc:145
1089#: ../src/printwx.cc:371
1090#: ../src/printwx.cc:984
1091#: ../src/printwx.cc:1038
1092#: n:154
1093msgid "Scale"
1094msgstr "比例尺"
1095
1096#: ../src/cmdline.c:190
1097#: n:157
1098#, c-format
1099msgid "Try “%s --help” for more information.\n"
1100msgstr ""
1101
1102#: ../src/avenprcore.cc:269
1103#: n:166
1104#, c-format
1105msgid "Page %d of %d"
1106msgstr "页 %d / %d"
1107
1108#: ../src/avenprcore.cc:272
1109#: ../src/printwx.cc:1463
1110#: n:167
1111#, c-format
1112msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1113msgstr ""
1114
1115#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1116#. something like "123°".  The bearing is up the page.
1117#: ../src/printwx.cc:929
1118#: n:168
1119#, c-format
1120msgid "Plan view, %s up page"
1121msgstr ""
1122
1123#. TRANSLATORS: This is used on printouts of elevations, with %s replaced by
1124#. something like "123°".  The bearing is the direction we’re looking.
1125#: ../src/printwx.cc:963
1126#: n:169
1127#, c-format
1128msgid "Elevation facing %s"
1129msgstr ""
1130
1131#. TRANSLATORS: This is used on printouts of tilted elevations, with the first
1132#. %s replaced by something like "123°", and the second by something like "-45°".
1133#. The bearing is the direction we’re looking.
1134#: ../src/printwx.cc:968
1135#: n:284
1136#, c-format
1137msgid "Elevation facing %s, tilted %s"
1138msgstr ""
1139
1140#. TRANSLATORS: This is used on printouts of extended elevations.
1141#: ../src/printwx.cc:976
1142#: n:191
1143msgid "Extended elevation"
1144msgstr ""
1145
1146#: ../src/cavern.c:412
1147#: n:172
1148msgid "Survey contains 1 survey station,"
1149msgstr ""
1150
1151#: ../src/cavern.c:414
1152#: n:173
1153#, c-format
1154msgid "Survey contains %ld survey stations,"
1155msgstr ""
1156
1157#: ../src/cavern.c:418
1158#: n:174
1159msgid " joined by 1 leg."
1160msgstr ""
1161
1162#: ../src/cavern.c:420
1163#: n:175
1164#, c-format
1165msgid " joined by %ld legs."
1166msgstr ""
1167
1168#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1169#: ../src/listpos.c:182
1170#: n:176
1171msgid "node"
1172msgstr "节点"
1173
1174#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1175#: ../src/listpos.c:182
1176#: n:177
1177msgid "nodes"
1178msgstr "节点"
1179
1180#. TRANSLATORS: connected component in the graph theory sense
1181#. It means there are %ld bits of survey with no connections between them
1182#. This message is only used if there are more than 1
1183#: ../src/cavern.c:434
1184#: n:178
1185#, c-format
1186msgid "Survey has %ld connected components."
1187msgstr ""
1188
1189#. TRANSLATORS: Label for button in aven’s cavern log window which causes the
1190#. survey data to be reprocessed.
1191#: ../src/cavernlog.cc:397
1192#: ../src/cavernlog.cc:408
1193#: n:184
1194msgid "Reprocess"
1195msgstr ""
1196
1197#: ../src/cmdline.c:238
1198#: ../src/cmdline.c:257
1199#: n:185
1200#, c-format
1201msgid "numeric argument “%s” out of range"
1202msgstr ""
1203
1204#: ../src/cmdline.c:240
1205#: n:186
1206#, c-format
1207msgid "argument “%s” not an integer"
1208msgstr ""
1209
1210#: ../src/cmdline.c:259
1211#: n:187
1212#, c-format
1213msgid "argument “%s” not a number"
1214msgstr ""
1215
1216#: ../src/commands.c:815
1217#: n:188
1218msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1219msgstr ""
1220
1221#: ../src/commands.c:818
1222#: n:189
1223msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1224msgstr ""
1225
1226#: ../src/listpos.c:82
1227#: n:190
1228#, c-format
1229msgid "Station “%s” referred to by *entrance or *export but never used"
1230msgstr ""
1231
1232#: ../src/commands.c:617
1233#: n:192
1234msgid "No matching BEGIN"
1235msgstr ""
1236
1237#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it’s
1238#. given at all
1239#: ../src/commands.c:639
1240#: n:193
1241msgid "Prefix tag doesn’t match BEGIN"
1242msgstr ""
1243
1244#: ../src/commands.c:643
1245#: n:194
1246msgid "Closing prefix omitted from END"
1247msgstr ""
1248
1249#. TRANSLATORS: heading line for .pos file
1250#. please try to ensure the “,”s (or at least the columns) are in the same place
1251#: ../src/3dtopos.c:109
1252#: n:195
1253msgid "( Easting, Northing, Altitude )"
1254msgstr ""
1255
1256#. TRANSLATORS: bpp is "Bits Per Pixel"
1257#: ../src/aboutdlg.cc:172
1258#: n:196
1259#, c-format
1260msgid "Display Depth: %d bpp"
1261msgstr ""
1262
1263#. TRANSLATORS: appended to previous message if the display is colour
1264#: ../src/aboutdlg.cc:173
1265#: n:197
1266msgid " (colour)"
1267msgstr ""
1268
1269#: ../src/readval.c:510
1270#: ../src/readval.c:520
1271#: ../src/readval.c:528
1272#: n:198
1273#, c-format
1274msgid "Expecting date, found “%s”"
1275msgstr ""
1276
1277#. TRANSLATORS: --help output for --survey option
1278#. "this" has been added to English translation
1279#: ../src/3dtopos.c:50
1280#: ../src/aven.cc:63
1281#: ../src/cad3d.c:628
1282#: ../src/diffpos.c:57
1283#: ../src/dump3d.c:49
1284#: ../src/extend.c:443
1285#: n:199
1286msgid "only load the sub-survey with this prefix"
1287msgstr ""
1288
1289#. TRANSLATORS: --help output for aven --print option
1290#: ../src/aven.cc:64
1291#: n:119
1292msgid "print and exit (requires a 3d file)"
1293msgstr ""
1294
1295#. TRANSLATORS: --help output for cavern --percentage option
1296#: ../src/cavern.c:122
1297#: n:161
1298msgid "display percentage progress"
1299msgstr ""
1300
1301#. TRANSLATORS: --help output for cavern --output option
1302#: ../src/cavern.c:123
1303#: n:162
1304msgid "set location for output files"
1305msgstr ""
1306
1307#. TRANSLATORS: --help output for cavern --quiet option
1308#: ../src/cavern.c:124
1309#: n:163
1310msgid "only show brief summary (-qq for errors only)"
1311msgstr ""
1312
1313#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1314#: ../src/cavern.c:125
1315#: n:164
1316msgid "do not create .err file"
1317msgstr ""
1318
1319#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1320#: ../src/cavern.c:126
1321#: n:165
1322msgid "turn warnings into errors"
1323msgstr ""
1324
1325#. TRANSLATORS: --help output for cavern --log option
1326#: ../src/cavern.c:127
1327#: n:170
1328msgid "log output to .log file"
1329msgstr ""
1330
1331#. TRANSLATORS: --help output for cavern --3d-version option
1332#: ../src/cavern.c:128
1333#: n:171
1334msgid "specify the 3d file format version to output"
1335msgstr ""
1336
1337#. TRANSLATORS: --help output for sorterr --horizontal option
1338#: ../src/sorterr.c:52
1339#: n:179
1340msgid "sort by horizontal error factor"
1341msgstr ""
1342
1343#. TRANSLATORS: --help output for sorterr --vertical option
1344#: ../src/sorterr.c:53
1345#: n:180
1346msgid "sort by vertical error factor"
1347msgstr ""
1348
1349#. TRANSLATORS: --help output for sorterr --percentage option
1350#: ../src/sorterr.c:54
1351#: n:181
1352msgid "sort by percentage error"
1353msgstr ""
1354
1355#. TRANSLATORS: --help output for sorterr --per-leg option
1356#: ../src/sorterr.c:55
1357#: n:182
1358msgid "sort by error per leg"
1359msgstr ""
1360
1361#. TRANSLATORS: --help output for sorterr --replace option
1362#: ../src/sorterr.c:56
1363#: n:183
1364msgid "replace .err file with resorted version"
1365msgstr ""
1366
1367#. TRANSLATORS: --help output for dump3d --rewind option
1368#: ../src/dump3d.c:50
1369#: n:204
1370msgid "rewind file and read it a second time"
1371msgstr ""
1372
1373#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s meaningless to say
1374#. your tape is marked in "0 feet" (but you might measure distance by counting
1375#. knots on a diving line, and tie them every "2 feet").
1376#: ../src/commands.c:1280
1377#: n:200
1378msgid "*UNITS factor must be non-zero"
1379msgstr ""
1380
1381#. TRANSLATORS: In the "File" menu
1382#: ../src/mainfrm.cc:760
1383#: n:201
1384msgid "&Screenshot…"
1385msgstr ""
1386
1387#: ../src/mainfrm.cc:1368
1388#: n:202
1389#, c-format
1390msgid "No survey data in 3d file “%s”"
1391msgstr ""
1392
1393#: ../src/gfxcore.cc:650
1394#: n:203
1395msgid "Facing"
1396msgstr "封面"
1397
1398#. TRANSLATORS: for the title of the About box
1399#: ../src/aboutdlg.cc:69
1400#: n:205
1401#, c-format
1402msgid "About %s"
1403msgstr "关于%s"
1404
1405#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1406#. it should be translated to the terminology that cavers using the language
1407#. would use.
1408#.
1409#. File->Open dialog:
1410#: ../src/mainfrm.cc:1821
1411#: n:206
1412msgid "Select a survey file to view"
1413msgstr ""
1414
1415#: ../src/mainfrm.cc:1813
1416#: n:207
1417msgid "Survex 3d files"
1418msgstr ""
1419
1420#: ../src/mainfrm.cc:1818
1421#: ../src/mainfrm.cc:2217
1422#: ../src/printwx.cc:563
1423#: n:208
1424msgid "All files"
1425msgstr "全部文件"
1426
1427#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1428#. it should be translated to the terminology that cavers using the language
1429#. would use.
1430#: ../src/mainfrm.cc:1812
1431#: n:229
1432msgid "All survey files"
1433msgstr ""
1434
1435#: ../src/mainfrm.cc:1814
1436#: n:329
1437msgid "Survex svx files"
1438msgstr ""
1439
1440#: ../src/mainfrm.cc:1816
1441#: n:330
1442msgid "Compass DAT and MAK files"
1443msgstr ""
1444
1445#: ../src/printwx.cc:269
1446#: n:411
1447msgid "DXF files"
1448msgstr ""
1449
1450#: ../src/printwx.cc:270
1451#: n:412
1452msgid "EPS files"
1453msgstr ""
1454
1455#: ../src/printwx.cc:271
1456#: n:413
1457msgid "GPX files"
1458msgstr ""
1459
1460#: ../src/printwx.cc:272
1461#: n:414
1462msgid "HPGL for plotters"
1463msgstr ""
1464
1465#: ../src/printwx.cc:273
1466#: n:415
1467msgid "Compass PLT for use with Carto"
1468msgstr ""
1469
1470#: ../src/printwx.cc:274
1471#: n:416
1472msgid "Skencil files"
1473msgstr ""
1474
1475#: ../src/printwx.cc:275
1476#: n:417
1477msgid "SVG files"
1478msgstr ""
1479
1480#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1481#. it should be translated to the terminology that cavers using the language
1482#. would use.
1483#.
1484#. This string is used in the about box (summarising the purpose of aven).
1485#: ../src/aboutdlg.cc:87
1486#: n:209
1487msgid "Survey visualisation tool"
1488msgstr ""
1489
1490#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any accelerator key.
1491#. The accelerators must be different within this group
1492#: ../src/mainfrm.cc:886
1493#: n:210
1494msgid "&File"
1495msgstr "文件(&F)"
1496
1497#: ../src/mainfrm.cc:887
1498#: n:211
1499msgid "&Rotation"
1500msgstr "旋转(&R)"
1501
1502#: ../src/mainfrm.cc:888
1503#: n:212
1504msgid "&Orientation"
1505msgstr "方向(&O)"
1506
1507#: ../src/mainfrm.cc:889
1508#: n:213
1509msgid "&View"
1510msgstr "查看(&V)"
1511
1512#: ../src/mainfrm.cc:891
1513#: n:214
1514msgid "&Controls"
1515msgstr "控制(&C)"
1516
1517#: ../src/mainfrm.cc:900
1518#: n:215
1519msgid "&Help"
1520msgstr "帮助(&H)"
1521
1522#: ../src/mainfrm.cc:893
1523#: n:216
1524msgid "&Presentation"
1525msgstr "演示文档(&P)"
1526
1527#: ../src/aboutdlg.cc:98
1528#: n:219
1529msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1530msgstr ""
1531
1532#. TRANSLATORS: Part of 3dtopos --help
1533#: ../src/3dtopos.c:85
1534#: n:217
1535msgid "3D_FILE [POS_FILE]"
1536msgstr ""
1537
1538#. TRANSLATORS: Part of diffpos --help
1539#: ../src/diffpos.c:261
1540#: n:218
1541msgid "FILE1 FILE2 [THRESHOLD]"
1542msgstr ""
1543
1544#. TRANSLATORS: Part of diffpos --help
1545#: ../src/diffpos.c:262
1546#: n:255
1547#, c-format
1548msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1549msgstr ""
1550
1551#. TRANSLATORS: Part of extend --help
1552#: ../src/extend.c:464
1553#: n:267
1554msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1555msgstr ""
1556
1557#. TRANSLATORS: Part of sorterr --help
1558#: ../src/sorterr.c:121
1559#: n:268
1560msgid "ERR_FILE [HOW_MANY]"
1561msgstr ""
1562
1563#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1564#. it should be translated to the terminology that cavers using the language
1565#. would use.
1566#.
1567#. Part of aven --help
1568#: ../src/aven.cc:106
1569#: ../src/aven.cc:130
1570#: n:269
1571msgid "[SURVEY_FILE]"
1572msgstr ""
1573
1574#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any accelerator key.
1575#. The string "\t" separates the menu text and any accelerator key.
1576#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
1577#. c.f. 201, 380, 381.
1578#: ../src/mainfrm.cc:754
1579#: n:220
1580msgid "&Open…\tCtrl+O"
1581msgstr ""
1582
1583#. TRANSLATORS: Used in the "colour key" for "colour by date" if there are
1584#. surveys without date information.
1585#: ../src/gfxcore.cc:931
1586#: n:221
1587msgid "Undated"
1588msgstr "取消隐藏"
1589
1590#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1591#. which aren’t part of a loop and so have no error information.
1592#: ../src/gfxcore.cc:953
1593#: n:290
1594msgid "Not in loop"
1595msgstr ""
1596
1597#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
1598#: ../src/commands.c:1134
1599#: n:222
1600msgid "NEWLINE can’t be the first reading"
1601msgstr ""
1602
1603#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
1604#: ../src/commands.c:1169
1605#: n:223
1606msgid "NEWLINE can’t be the last reading"
1607msgstr ""
1608
1609#. TRANSLATORS: error from "*data normal station tape compass clino"
1610#: ../src/commands.c:1191
1611#: n:224
1612msgid "Interleaved readings, but no NEWLINE"
1613msgstr ""
1614
1615#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
1616#: ../src/commands.c:1078
1617#: n:225
1618#, c-format
1619msgid "Reading “%s” must occur before NEWLINE"
1620msgstr ""
1621
1622#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
1623#: ../src/commands.c:1127
1624#: n:226
1625msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1626msgstr ""
1627
1628#: ../src/commands.c:1314
1629#: n:227
1630msgid "Can’t calibrate angular and length quantities together"
1631msgstr ""
1632
1633#: ../src/commands.c:564
1634#: n:397
1635msgid "Bad *alias command"
1636msgstr ""
1637
1638#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
1639#. height values).
1640#~ msgid "Select a terrain file to view"
1641#~ msgstr ""
1642
1643#~ msgid "Terrain files"
1644#~ msgstr ""
1645
1646#. TRANSLATORS: %s will be replaced by the application name ("Aven" currently)
1647#: ../src/log.cc:30
1648#: n:228
1649#, c-format
1650msgid "%s Error Log"
1651msgstr ""
1652
1653#. TRANSLATORS: Used in the "Export" settings dialog
1654#: ../src/printwx.cc:521
1655#: n:230
1656msgid "&Export…"
1657msgstr ""
1658
1659#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
1660#. Tickable menu item which toggles auto rotation
1661#: ../src/mainfrm.cc:773
1662#: n:231
1663msgid "Au&to-Rotate\tSpace"
1664msgstr ""
1665
1666#: ../src/mainfrm.cc:775
1667#: n:232
1668msgid "Speed &Up"
1669msgstr ""
1670
1671#: ../src/mainfrm.cc:776
1672#: n:233
1673msgid "Slow &Down"
1674msgstr ""
1675
1676#: ../src/mainfrm.cc:778
1677#: n:234
1678msgid "&Reverse Direction"
1679msgstr "反向(&R)"
1680
1681#: ../src/mainfrm.cc:780
1682#: n:235
1683msgid "Step Once &Anticlockwise"
1684msgstr ""
1685
1686#: ../src/mainfrm.cc:781
1687#: n:236
1688msgid "Step Once &Clockwise"
1689msgstr ""
1690
1691#. TRANSLATORS: View *looking* North
1692#: ../src/gfxcore.cc:3005
1693#: ../src/mainfrm.cc:784
1694#: n:240
1695msgid "View &North"
1696msgstr ""
1697
1698#. TRANSLATORS: View *looking* East
1699#: ../src/gfxcore.cc:3006
1700#: ../src/mainfrm.cc:785
1701#: n:241
1702msgid "View &East"
1703msgstr ""
1704
1705#. TRANSLATORS: View *looking* South
1706#: ../src/gfxcore.cc:3007
1707#: ../src/mainfrm.cc:786
1708#: n:242
1709msgid "View &South"
1710msgstr ""
1711
1712#. TRANSLATORS: View *looking* West
1713#: ../src/gfxcore.cc:3008
1714#: ../src/mainfrm.cc:787
1715#: n:243
1716msgid "View &West"
1717msgstr ""
1718
1719#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1720#. it should be translated to the terminology that cavers using the language
1721#. would use.
1722#: ../src/mainfrm.cc:789
1723#: n:244
1724msgid "Shift Survey &Left"
1725msgstr ""
1726
1727#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1728#. it should be translated to the terminology that cavers using the language
1729#. would use.
1730#: ../src/mainfrm.cc:790
1731#: n:245
1732msgid "Shift Survey &Right"
1733msgstr ""
1734
1735#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1736#. it should be translated to the terminology that cavers using the language
1737#. would use.
1738#: ../src/mainfrm.cc:791
1739#: n:246
1740msgid "Shift Survey &Up"
1741msgstr ""
1742
1743#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1744#. it should be translated to the terminology that cavers using the language
1745#. would use.
1746#: ../src/mainfrm.cc:792
1747#: n:247
1748msgid "Shift Survey &Down"
1749msgstr ""
1750
1751#: ../src/gfxcore.cc:3020
1752#: ../src/mainfrm.cc:794
1753#: n:248
1754msgid "&Plan View"
1755msgstr ""
1756
1757#: ../src/gfxcore.cc:3021
1758#: ../src/mainfrm.cc:795
1759#: n:249
1760msgid "Ele&vation"
1761msgstr ""
1762
1763#: ../src/mainfrm.cc:797
1764#: n:250
1765msgid "&Higher Viewpoint"
1766msgstr ""
1767
1768#: ../src/mainfrm.cc:798
1769#: n:251
1770msgid "L&ower Viewpoint"
1771msgstr ""
1772
1773#: ../src/mainfrm.cc:801
1774#: n:252
1775msgid "&Zoom In\t]"
1776msgstr ""
1777
1778#: ../src/mainfrm.cc:802
1779#: n:253
1780msgid "Zoo&m Out\t["
1781msgstr ""
1782
1783#: ../src/mainfrm.cc:804
1784#: n:254
1785msgid "Restore De&fault View"
1786msgstr ""
1787
1788#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing" and
1789#. "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in the
1790#. "what to print" dialog.
1791#: ../src/printwx.cc:337
1792#: n:283
1793msgid "View"
1794msgstr "查看"
1795
1796#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
1797#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn’t a
1798#. good name for this but nothing better has yet come to mind!
1799#: ../src/printwx.cc:338
1800#: n:256
1801msgid "Elements"
1802msgstr "元素"
1803
1804#: ../src/printwx.cc:392
1805#: ../src/printwx.cc:727
1806#: n:257
1807#, c-format
1808msgid "%d pages (%dx%d)"
1809msgstr ""
1810
1811#. TRANSLATORS: used in the scale drop down selector in the print dialog
1812#. the implicit meaning is "choose a suitable scale to fit the
1813#. plot on a single page", but we need something shorter
1814#: ../src/printwx.cc:374
1815#: ../src/printwx.cc:746
1816#: n:258
1817msgid "One page"
1818msgstr ""
1819
1820#: ../src/mainfrm.cc:137
1821#: ../src/printwx.cc:405
1822#: n:259
1823msgid "Bearing"
1824msgstr ""
1825
1826#: ../src/printwx.cc:439
1827#: n:260
1828msgid "Station Names"
1829msgstr ""
1830
1831#: ../src/printwx.cc:435
1832#: n:261
1833msgid "Crosses"
1834msgstr "格点"
1835
1836#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1837#. "survey stations".
1838#: ../src/printwx.cc:427
1839#: n:262
1840msgid "Underground Survey Legs"
1841msgstr ""
1842
1843#: ../src/printwx.cc:455
1844#: n:393
1845msgid "Cross-sections"
1846msgstr ""
1847
1848#: ../src/printwx.cc:460
1849#: n:394
1850msgid "Walls"
1851msgstr ""
1852
1853#: ../src/printwx.cc:464
1854#: n:395
1855msgid "Passages"
1856msgstr ""
1857
1858#: ../src/printwx.cc:468
1859#: n:421
1860msgid "Origin in centre"
1861msgstr ""
1862
1863#: ../src/printwx.cc:472
1864#: n:422
1865msgid "Full coordinates"
1866msgstr ""
1867
1868#. TRANSLATORS: Used in the print dialog:
1869#: ../src/printwx.cc:410
1870#: n:263
1871msgid "Tilt angle"
1872msgstr ""
1873
1874#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
1875#: ../src/printwx.cc:478
1876#: n:264
1877msgid "Page Borders"
1878msgstr ""
1879
1880#. TRANSLATORS: As in the legend on a map.  Used in the print dialog - controls
1881#. drawing the box at the lower left with survey name, view angles, etc
1882#: ../src/printwx.cc:484
1883#: n:265
1884msgid "Legend"
1885msgstr ""
1886
1887#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
1888#. (otherwise they’ll be skipped to save paper)
1889#: ../src/printwx.cc:482
1890#: n:266
1891msgid "Blank Pages"
1892msgstr ""
1893
1894#. TRANSLATORS: Items in the "View" menu:
1895#: ../src/mainfrm.cc:818
1896#: n:270
1897msgid "Station &Names\tCtrl+N"
1898msgstr ""
1899
1900#. TRANSLATORS: Toggles drawing of 3D passages
1901#: ../src/mainfrm.cc:819
1902#: n:346
1903msgid "Passage &Tubes\tCtrl+T"
1904msgstr ""
1905
1906#: ../src/mainfrm.cc:820
1907#: n:271
1908msgid "&Crosses\tCtrl+X"
1909msgstr "格点(&C)\tCtrl+X"
1910
1911#: ../src/mainfrm.cc:821
1912#: n:297
1913msgid "&Grid\tCtrl+G"
1914msgstr ""
1915
1916#: ../src/mainfrm.cc:822
1917#: n:318
1918msgid "&Bounding Box\tCtrl+B"
1919msgstr ""
1920
1921#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1922#. "survey stations".
1923#: ../src/mainfrm.cc:824
1924#: n:272
1925msgid "&Underground Survey Legs\tCtrl+L"
1926msgstr ""
1927
1928#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1929#. "survey stations".
1930#: ../src/mainfrm.cc:825
1931#: n:291
1932msgid "&Surface Survey Legs\tCtrl+F"
1933msgstr ""
1934
1935#: ../src/mainfrm.cc:834
1936#: n:273
1937msgid "&Overlapping Names"
1938msgstr ""
1939
1940#: ../src/gfxcore.cc:3043
1941#: ../src/mainfrm.cc:835
1942#: n:292
1943msgid "Colour by &Depth"
1944msgstr ""
1945
1946#: ../src/gfxcore.cc:3044
1947#: ../src/mainfrm.cc:836
1948#: n:293
1949msgid "Colour by D&ate"
1950msgstr ""
1951
1952#: ../src/gfxcore.cc:3045
1953#: ../src/mainfrm.cc:837
1954#: n:289
1955msgid "Colour by E&rror"
1956msgstr ""
1957
1958#: ../src/mainfrm.cc:839
1959#: n:294
1960msgid "Highlight &Entrances"
1961msgstr ""
1962
1963#: ../src/mainfrm.cc:840
1964#: n:295
1965msgid "Highlight &Fixed Points"
1966msgstr ""
1967
1968#: ../src/mainfrm.cc:841
1969#: n:296
1970msgid "Highlight E&xported Points"
1971msgstr ""
1972
1973#: ../src/printwx.cc:443
1974#: n:418
1975msgid "Entrances"
1976msgstr ""
1977
1978#: ../src/printwx.cc:447
1979#: n:419
1980msgid "Fixed Points"
1981msgstr ""
1982
1983#: ../src/printwx.cc:451
1984#: n:420
1985msgid "Exported Stations"
1986msgstr ""
1987
1988#: ../src/mainfrm.cc:846
1989#: n:237
1990msgid "&Perspective"
1991msgstr ""
1992
1993#: ../src/mainfrm.cc:848
1994#: n:238
1995msgid "Textured &Walls"
1996msgstr ""
1997
1998#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
1999#. instead if it gives a better translation which most users will understand.
2000#: ../src/mainfrm.cc:849
2001#: n:239
2002msgid "Fade Distant Ob&jects"
2003msgstr ""
2004
2005#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2006#. "survey stations".
2007#: ../src/mainfrm.cc:850
2008#: n:298
2009msgid "Smoot&hed Survey Legs"
2010msgstr ""
2011
2012#: ../src/mainfrm.cc:856
2013#: ../src/mainfrm.cc:860
2014#: n:356
2015msgid "Full Screen &Mode\tF11"
2016msgstr ""
2017
2018#: ../src/mainfrm.cc:874
2019#: n:274
2020msgid "&Compass"
2021msgstr "罗盘(&C)"
2022
2023#: ../src/mainfrm.cc:875
2024#: n:275
2025msgid "C&linometer"
2026msgstr ""
2027
2028#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2029#. corresponds to which depth, date, survey closure error, etc.
2030#: ../src/mainfrm.cc:876
2031#: n:276
2032msgid "Colour &Key"
2033msgstr ""
2034
2035#: ../src/mainfrm.cc:877
2036#: n:277
2037msgid "&Scale Bar"
2038msgstr "缩放栏(&S)"
2039
2040#: ../src/mainfrm.cc:869
2041#: n:280
2042msgid "&Reverse Sense\tCtrl+R"
2043msgstr ""
2044
2045#: ../src/mainfrm.cc:844
2046#: ../src/mainfrm.cc:871
2047#: n:281
2048msgid "&Cancel Measuring Line\tEscape"
2049msgstr ""
2050
2051#: ../src/mainfrm.cc:878
2052#: n:299
2053msgid "&Indicators"
2054msgstr ""
2055
2056#: ../src/z_getopt.c:695
2057#: ../src/z_getopt.c:707
2058#: n:300
2059#, c-format
2060msgid "%s: option “%s” is ambiguous\n"
2061msgstr "%s:选项“%s”含义不明确\n"
2062
2063#: ../src/z_getopt.c:1023
2064#: ../src/z_getopt.c:1034
2065#: n:301
2066#, c-format
2067msgid "%s: option “-W %s” is ambiguous\n"
2068msgstr "%s:选项“-W %s”含义不明确\n"
2069
2070#: ../src/z_getopt.c:751
2071#: ../src/z_getopt.c:755
2072#: n:302
2073#, c-format
2074msgid "%s: option “%c%s” doesn’t allow an argument\n"
2075msgstr "%s:选项“%c%s”不接受参数\n"
2076
2077#: ../src/z_getopt.c:740
2078#: ../src/z_getopt.c:743
2079#: n:303
2080#, c-format
2081msgid "%s: option “--%s” doesn’t allow an argument\n"
2082msgstr "%s:选项“--%s”不接受参数\n"
2083
2084#: ../src/z_getopt.c:1058
2085#: ../src/z_getopt.c:1069
2086#: n:304
2087#, c-format
2088msgid "%s: option “-W %s” doesn’t allow an argument\n"
2089msgstr "%s:选项“-W %s”不接受参数\n"
2090
2091#: ../src/z_getopt.c:790
2092#: ../src/z_getopt.c:802
2093#: ../src/z_getopt.c:1089
2094#: ../src/z_getopt.c:1101
2095#: n:305
2096#, c-format
2097msgid "%s: option “%s” requires an argument\n"
2098msgstr "%s:参数“%s”需要参数\n"
2099
2100#: ../src/z_getopt.c:960
2101#: ../src/z_getopt.c:971
2102#: ../src/z_getopt.c:1154
2103#: ../src/z_getopt.c:1166
2104#: n:306
2105#, c-format
2106msgid "%s: option requires an argument -- %c\n"
2107msgstr "%s:选项需要一个参数 -- %c\n"
2108
2109#: ../src/z_getopt.c:840
2110#: ../src/z_getopt.c:843
2111#: n:307
2112#, c-format
2113msgid "%s: unrecognized option “--%s”\n"
2114msgstr "%s:无法识别的选项“--%s”\n"
2115
2116#: ../src/z_getopt.c:851
2117#: ../src/z_getopt.c:854
2118#: n:308
2119#, c-format
2120msgid "%s: unrecognized option “%c%s”\n"
2121msgstr "%s:无法识别的选项“%c%s”\n"
2122
2123#: ../src/z_getopt.c:901
2124#: ../src/z_getopt.c:904
2125#: n:309
2126#, c-format
2127msgid "%s: illegal option -- %c\n"
2128msgstr "%s:非法选项 -- %c\n"
2129
2130#: ../src/z_getopt.c:910
2131#: ../src/z_getopt.c:913
2132#: n:310
2133#, c-format
2134msgid "%s: invalid option -- %c\n"
2135msgstr "%s:选项无效 -- %c\n"
2136
2137#: ../src/mainfrm.cc:807
2138#: n:311
2139msgid "&New Presentation"
2140msgstr ""
2141
2142#: ../src/mainfrm.cc:808
2143#: n:312
2144msgid "&Open Presentation…"
2145msgstr ""
2146
2147#: ../src/mainfrm.cc:809
2148#: n:313
2149msgid "&Save Presentation"
2150msgstr ""
2151
2152#: ../src/mainfrm.cc:810
2153#: n:314
2154msgid "Sa&ve Presentation As…"
2155msgstr ""
2156
2157#. TRANSLATORS: "Mark" as in "Mark this position"
2158#: ../src/mainfrm.cc:812
2159#: n:315
2160msgid "&Mark"
2161msgstr ""
2162
2163#. TRANSLATORS: "Play" as in "Play back a recording"
2164#: ../src/mainfrm.cc:813
2165#: n:316
2166msgid "Pla&y"
2167msgstr "播放(&Y)"
2168
2169#: ../src/mainfrm.cc:814
2170#: n:317
2171msgid "&Export as Movie…"
2172msgstr ""
2173
2174#: ../src/mainfrm.cc:2294
2175#: n:331
2176msgid "Export Movie"
2177msgstr ""
2178
2179#: ../src/mainfrm.cc:340
2180#: n:319
2181msgid "Select an output filename"
2182msgstr "选择输出文件名"
2183
2184#: ../src/mainfrm.cc:337
2185#: ../src/mainfrm.cc:2216
2186#: n:320
2187msgid "Aven presentations"
2188msgstr ""
2189
2190#. TRANSLATORS: title of the save screenshot dialog
2191#: ../src/mainfrm.cc:1834
2192#: n:321
2193msgid "Save Screenshot"
2194msgstr "保存截图"
2195
2196#: ../src/mainfrm.cc:2211
2197#: ../src/mainfrm.cc:2214
2198#: n:322
2199msgid "Select a presentation to open"
2200msgstr ""
2201
2202#: ../src/mainfrm.cc:419
2203#: n:323
2204#, c-format
2205msgid "Error in format of presentation file “%s”"
2206msgstr ""
2207
2208#. TRANSLATORS: "Compass" as in Larry Fish’s cave surveying package, so probably shouldn’t
2209#. be translated
2210#: ../src/mainfrm.cc:1815
2211#: n:324
2212msgid "Compass PLT files"
2213msgstr ""
2214
2215#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying package, so don’t translate it.
2216#: ../src/mainfrm.cc:1817
2217#: n:325
2218msgid "CMAP XYZ files"
2219msgstr ""
2220
2221#. TRANSLATORS: title of message box
2222#: ../src/mainfrm.cc:1890
2223#: ../src/mainfrm.cc:2188
2224#: ../src/mainfrm.cc:2205
2225#: n:326
2226msgid "Modified Presentation"
2227msgstr ""
2228
2229#. TRANSLATORS: and the question in that box
2230#: ../src/mainfrm.cc:1889
2231#: ../src/mainfrm.cc:2187
2232#: ../src/mainfrm.cc:2204
2233#: n:327
2234msgid "The current presentation has been modified.  Abandon unsaved changes?"
2235msgstr ""
2236
2237#: ../src/mainfrm.cc:2505
2238#: ../src/mainfrm.cc:2514
2239#: n:328
2240msgid "No matches were found."
2241msgstr "未找到匹配内容。"
2242
2243#~ msgid "Open &Terrain…"
2244#~ msgstr ""
2245
2246#~ msgid "Solid Su&rface"
2247#~ msgstr ""
2248
2249#. TRANSLATORS: number of stations found matching search
2250#, c-format
2251#~ msgid "%d found"
2252#~ msgstr ""
2253
2254#. TRANSLATORS: "Find stations" button tooltip
2255#: ../src/mainfrm.cc:950
2256#: n:332
2257msgid "Find"
2258msgstr "查找"
2259
2260#. TRANSLATORS: "Hide stations" button default tooltip
2261#: ../src/mainfrm.cc:951
2262#: ../src/mainfrm.cc:2546
2263#: n:333
2264msgid "Hide"
2265msgstr "隐藏"
2266
2267#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2268#: ../src/mainfrm.cc:2507
2269#: n:334
2270#, c-format
2271msgid "Hide %d found stations"
2272msgstr ""
2273
2274#: ../src/mainfrm.cc:220
2275#: ../src/mainfrm.cc:1960
2276#: ../src/mainfrm.cc:1965
2277#: ../src/mainfrm.cc:2030
2278#: ../src/mainfrm.cc:2033
2279#: ../src/mainfrm.cc:2077
2280#: ../src/mainfrm.cc:2082
2281#: n:335
2282msgid "Altitude"
2283msgstr "海拔"
2284
2285#. TRANSLATORS: error if you try to drag multiple files to the aven window
2286#: ../src/mainfrm.cc:693
2287#: n:336
2288msgid "You may only view one 3d file at a time."
2289msgstr ""
2290
2291#: ../src/mainfrm.cc:879
2292#: n:337
2293msgid "&Side Panel"
2294msgstr ""
2295
2296#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
2297#: ../src/mainfrm.cc:1959
2298#: ../src/mainfrm.cc:1963
2299#: ../src/mainfrm.cc:1986
2300#: ../src/mainfrm.cc:1988
2301#: ../src/mainfrm.cc:2076
2302#: ../src/mainfrm.cc:2080
2303#: n:338
2304msgid "%.2f E, %.2f N"
2305msgstr "%.2f东%.2f北"
2306
2307#. TRANSLATORS: Used in Aven:
2308#. From <stationname>
2309#. H: 123.45m V: 234.56m
2310#. Dist: 456.78m  Brg: 200
2311#: ../src/mainfrm.cc:2003
2312#: ../src/mainfrm.cc:2044
2313#: ../src/mainfrm.cc:2101
2314#: n:339
2315#, c-format
2316msgid "From %s"
2317msgstr ""
2318
2319#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2320#: ../src/mainfrm.cc:2105
2321#: ../src/mainfrm.cc:2108
2322#: n:340
2323#, c-format
2324msgid "H %.2f%s, V %.2f%s"
2325msgstr ""
2326
2327#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
2328#: ../src/mainfrm.cc:2121
2329#: ../src/mainfrm.cc:2125
2330#: n:341
2331#, c-format
2332msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2333msgstr ""
2334
2335#. TRANSLATORS: tickable menu item in View menu
2336#: ../src/gfxcore.cc:3034
2337#: ../src/gfxcore.cc:3049
2338#: ../src/mainfrm.cc:881
2339#: n:342
2340msgid "&Metric"
2341msgstr ""
2342
2343#. TRANSLATORS: tickable menu item in View menu.
2344#. Degrees are the angular measurement where there are 360 in a
2345#. full circle.
2346#: ../src/gfxcore.cc:3011
2347#: ../src/gfxcore.cc:3024
2348#: ../src/mainfrm.cc:882
2349#: n:343
2350msgid "&Degrees"
2351msgstr ""
2352
2353#. TRANSLATORS: abbreviation for "metres" (unit of length), used e.g. as "10m".
2354#. If there should be a space between the number and this, include one in the
2355#. translation.
2356#: ../src/mainfrm.cc:61
2357#: n:96
2358msgid "m"
2359msgstr ""
2360
2361#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g. as "10ft".
2362#. If there should be a space between the number and this, include one in the
2363#. translation.
2364#: ../src/mainfrm.cc:67
2365#: n:76
2366msgid "ft"
2367msgstr ""
2368
2369#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2370#: ../src/gfxcore.cc:3010
2371#: n:387
2372msgid "&Hide Compass"
2373msgstr ""
2374
2375#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2376#: ../src/gfxcore.cc:3023
2377#: n:384
2378msgid "&Hide Clino"
2379msgstr ""
2380
2381#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2382#: ../src/gfxcore.cc:3033
2383#: n:385
2384msgid "&Hide scale bar"
2385msgstr ""
2386
2387#. TRANSLATORS: Menu item which turns off the colour key.
2388#. The "Colour Key" is the thing in aven showing which colour
2389#. corresponds to which depth, date, survey closure error, etc.
2390#: ../src/gfxcore.cc:3047
2391#: n:386
2392msgid "&Hide colour key"
2393msgstr ""
2394
2395#. TRANSLATORS: degree symbol - probably should be translated to itself.
2396#: ../src/mainfrm.cc:2007
2397#: ../src/mainfrm.cc:2114
2398#: ../src/printwx.cc:927
2399#: ../src/printwx.cc:952
2400#: ../src/printwx.cc:956
2401#: ../src/printwx.cc:960
2402#: ../src/printwx.cc:967
2403#: n:344
2404msgid "°"
2405msgstr "°"
2406
2407#. TRANSLATORS: alternative angle units (400 grad = 360 degrees = full circle).
2408#. Try to make this as short as sensibly possible.
2409#.
2410#. E.g. in Italian and Spanish we use "g.cent." rather than
2411#. "gradi quattrocentesimali"/"grados centesimales"
2412#: ../src/mainfrm.cc:2010
2413#: ../src/mainfrm.cc:2117
2414#: n:345
2415msgid "grad"
2416msgstr "梯度"
2417
2418#: ../src/mainfrm.cc:864
2419#: n:347
2420#~ msgid "&Preferences…"
2421#~ msgstr ""
2422
2423#: n:348
2424#~ msgid "Draw passage walls"
2425#~ msgstr ""
2426
2427#: n:349
2428#~ msgid "Estimate LRUD readings based on heuristics"
2429#~ msgstr ""
2430
2431#: n:350
2432#~ msgid "Mark survey stations with crosses"
2433#~ msgstr ""
2434
2435#: n:351
2436#~ msgid "Highlight stations marked as entrances"
2437#~ msgstr ""
2438
2439#: n:352
2440#~ msgid "Highlight stations marked as fixed points"
2441#~ msgstr ""
2442
2443#: n:353
2444#~ msgid "Highlight stations which are exported"
2445#~ msgstr ""
2446
2447#: n:354
2448#~ msgid "Mark survey stations with their names"
2449#~ msgstr ""
2450
2451#: n:355
2452#~ msgid "Allow names to overlap on the display (faster)"
2453#~ msgstr ""
2454
2455#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2456#. "survey stations".
2457#: n:357
2458#~ msgid "Display underground survey legs"
2459#~ msgstr ""
2460
2461#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2462#. "survey stations".
2463#: n:358
2464#~ msgid "Display surface survey legs"
2465#~ msgstr ""
2466
2467#: n:359
2468#~ msgid "Colour surface surveys by depth"
2469#~ msgstr ""
2470
2471#: n:360
2472#~ msgid "Draw surface legs with dashed lines"
2473#~ msgstr ""
2474
2475#: n:361
2476#~ msgid "Draw a grid"
2477#~ msgstr ""
2478
2479#: n:362
2480#~ msgid "metric units"
2481#~ msgstr ""
2482
2483#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
2484#. the USA (rather confusingly now that England has largely gone metric!)
2485#: n:363
2486#~ msgid "imperial units"
2487#~ msgstr ""
2488
2489#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
2490#. full circle.
2491#: n:364
2492#~ msgid "degrees (°)"
2493#~ msgstr ""
2494
2495#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
2496#. full circle.
2497#: n:365
2498#~ msgid "grads"
2499#~ msgstr ""
2500
2501#: n:366
2502#~ msgid "Display measurements in"
2503#~ msgstr ""
2504
2505#: n:367
2506#~ msgid "Display angles in"
2507#~ msgstr ""
2508
2509#. TRANSLATORS: reverses the sense of the mouse controls
2510#: n:368
2511#~ msgid "Reverse the sense of the controls"
2512#~ msgstr ""
2513
2514#: n:369
2515#~ msgid "Display scale bar"
2516#~ msgstr ""
2517
2518#: n:370
2519#~ msgid "Display depth bar"
2520#~ msgstr ""
2521
2522#: n:371
2523#~ msgid "Display compass"
2524#~ msgstr ""
2525
2526#: n:372
2527#~ msgid "Display clinometer"
2528#~ msgstr ""
2529
2530#: n:373
2531#~ msgid "Display side panel"
2532#~ msgstr ""
2533
2534#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
2535#: ../src/mainfrm.cc:2014
2536#: ../src/mainfrm.cc:2017
2537#: n:374
2538#, c-format
2539msgid "%s: H %.2f%s, Brg %03d%s"
2540msgstr ""
2541
2542#. TRANSLATORS: "V" is short for "Vertical"
2543#: ../src/mainfrm.cc:2047
2544#: ../src/mainfrm.cc:2050
2545#: n:375
2546#, c-format
2547msgid "%s: V %.2f%s"
2548msgstr ""
2549
2550#. TRANSLATORS: labels for tabbed side panel
2551#. this is for the tab with the tree hierarchy of survey station names
2552#: ../src/mainfrm.cc:1002
2553#: n:376
2554msgid "Surveys"
2555msgstr ""
2556
2557#: ../src/mainfrm.cc:1003
2558#: n:377
2559msgid "Presentation"
2560msgstr "演示文档"
2561
2562#: ../src/mainfrm.cc:218
2563#: n:378
2564msgid "Easting"
2565msgstr "向东"
2566
2567#: ../src/mainfrm.cc:219
2568#: n:379
2569msgid "Northing"
2570msgstr "向北"
2571
2572#: ../src/mainfrm.cc:757
2573#: n:380
2574msgid "&Print…\tCtrl+P"
2575msgstr ""
2576
2577#: ../src/mainfrm.cc:758
2578#: n:381
2579msgid "P&age Setup…"
2580msgstr ""
2581
2582#: ../src/mainfrm.cc:761
2583#: n:382
2584msgid "&Export as…"
2585msgstr ""
2586
2587#. TRANSLATORS: Title of file dialog to choose name and type of exported file.
2588#: ../src/printwx.cc:567
2589#: n:401
2590msgid "Export as:"
2591msgstr ""
2592
2593#. TRANSLATORS: Title of the export dialog
2594#: ../src/printwx.cc:287
2595#: n:383
2596msgid "Export"
2597msgstr "导出"
2598
2599#. TRANSLATORS: for about box:
2600#: ../src/aboutdlg.cc:134
2601#: n:390
2602msgid "System Information:"
2603msgstr ""
2604
2605#. TRANSLATORS: Title of the print preview dialog
2606#: ../src/printwx.cc:606
2607#: n:398
2608msgid "Print Preview"
2609msgstr "打印预览"
2610
2611#. TRANSLATORS: Title of the print dialog
2612#: ../src/printwx.cc:287
2613#: n:399
2614msgid "Print"
2615msgstr "打印"
2616
2617#: ../src/printwx.cc:518
2618#: n:400
2619msgid "&Print…"
2620msgstr "打印(&P)"
2621
2622#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2623#. "survey stations".
2624#: ../src/printwx.cc:431
2625#: n:403
2626msgid "Sur&face Survey Legs"
2627msgstr ""
2628
2629#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2630#: ../src/mainfrm.cc:110
2631#: n:404
2632msgid "Edit Waypoint"
2633msgstr "编辑航点"
2634
2635#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint in a presentation.
2636#: ../src/mainfrm.cc:147
2637#: n:278
2638msgid " (unused in perspective view)"
2639msgstr ""
2640
2641#. TRANSLATORS: Field label in dialog to edit a waypoint in a presentation.
2642#: ../src/mainfrm.cc:152
2643#: n:279
2644msgid "Time: "
2645msgstr "时间: "
2646
2647#. TRANSLATORS: units+info after time field in dialog to edit a waypoint in a presentation.
2648#: ../src/mainfrm.cc:154
2649#: n:282
2650msgid " secs (0 = auto; *6 = 6 times auto)"
2651msgstr ""
2652
2653#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
2654#. things in future).
2655#: ../src/aven.cc:219
2656#: n:405
2657#, c-format
2658msgid "This version of %s requires OpenGL to work, but it isn’t available."
2659msgstr ""
2660
2661#. TRANSLATORS: for diffpos:
2662#: ../src/diffpos.c:158
2663#: n:500
2664#, c-format
2665msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2666msgstr ""
2667
2668#. TRANSLATORS: for diffpos:
2669#: ../src/diffpos.c:194
2670#: n:501
2671#, c-format
2672msgid "Added: %s"
2673msgstr ""
2674
2675#. TRANSLATORS: for diffpos:
2676#: ../src/diffpos.c:216
2677#: n:502
2678#, c-format
2679msgid "Deleted: %s"
2680msgstr ""
2681
2682#. TRANSLATORS: for extend:
2683#. the user specified breaking a loop or changing extend direction at
2684#. this station, but we didn’t find it in the 3d file
2685#: ../src/extend.c:258
2686#: ../src/extend.c:275
2687#: ../src/extend.c:315
2688#: ../src/extend.c:355
2689#: ../src/extend.c:395
2690#: n:510
2691#, c-format
2692msgid "Failed to find station %s"
2693msgstr ""
2694
2695#. TRANSLATORS: for extend:
2696#. the user specified breaking a loop or changing extend direction at
2697#. this leg, but we didn’t find it in the 3d file
2698#: ../src/extend.c:297
2699#: ../src/extend.c:337
2700#: ../src/extend.c:377
2701#: ../src/extend.c:417
2702#: n:511
2703#, c-format
2704msgid "Failed to find leg %s → %s"
2705msgstr ""
2706
2707#. TRANSLATORS: for extend:
2708#. "extend" is starting to produce an extended elevation from station %s
2709#: ../src/extend.c:252
2710#: n:512
2711#, c-format
2712msgid "Starting from station %s"
2713msgstr ""
2714
2715#. TRANSLATORS: for extend:
2716#: ../src/extend.c:268
2717#: n:513
2718#, c-format
2719msgid "Extending to the left from station %s"
2720msgstr ""
2721
2722#. TRANSLATORS: for extend:
2723#: ../src/extend.c:308
2724#: n:514
2725#, c-format
2726msgid "Extending to the right from station %s"
2727msgstr ""
2728
2729#. TRANSLATORS: for extend:
2730#: ../src/extend.c:287
2731#: n:515
2732#, c-format
2733msgid "Extending to the left from leg %s → %s"
2734msgstr ""
2735
2736#. TRANSLATORS: for extend:
2737#: ../src/extend.c:327
2738#: n:516
2739#, c-format
2740msgid "Extending to the right from leg %s → %s"
2741msgstr ""
2742
2743#. TRANSLATORS: for extend:
2744#: ../src/extend.c:388
2745#: n:517
2746#, c-format
2747msgid "Breaking survey loop at station %s"
2748msgstr ""
2749
2750#. TRANSLATORS: for extend:
2751#: ../src/extend.c:407
2752#: n:518
2753#, c-format
2754msgid "Breaking survey loop at leg %s → %s"
2755msgstr ""
2756
2757#. TRANSLATORS: for extend:
2758#: ../src/extend.c:348
2759#: n:519
2760#, c-format
2761msgid "Swapping extend direction from station %s"
2762msgstr ""
2763
2764#. TRANSLATORS: for extend:
2765#: ../src/extend.c:367
2766#: n:520
2767#, c-format
2768msgid "Swapping extend direction from leg %s → %s"
2769msgstr ""
2770
2771#. TRANSLATORS: for extend:
2772#: ../src/extend.c:533
2773#: n:521
2774#, c-format
2775msgid "Applying specfile: “%s”"
2776msgstr ""
2777
2778#. TRANSLATORS: for extend:
2779#. Used to tell the user that a file is being written - %s is the filename
2780#: ../src/extend.c:593
2781#: n:522
2782#, c-format
2783msgid "Writing %s…"
2784msgstr ""
2785
2786#: ../src/findentrances.cc:100
2787#: ../src/gpx.cc:70
2788#: n:287
2789#, c-format
2790msgid "Failed to initialise input coordinate system “%s”"
2791msgstr ""
2792
2793#: ../src/findentrances.cc:103
2794#: ../src/gpx.cc:76
2795#: n:288
2796#, c-format
2797msgid "Failed to initialise output coordinate system “%s”"
2798msgstr ""
2799
2800#: ../src/findentrances.cc:155
2801#: n:388
2802msgid "-d PROJ_DATUM 3D_FILE"
2803msgstr ""
2804
2805#. TRANSLATORS: The findentrances utility uses the PROJ library to do
2806#. coordinate transformations (https://trac.osgeo.org/proj/) - you
2807#. pass findentrances a string to tell PROJ what the input datum is.
2808#: ../src/findentrances.cc:146
2809#: ../src/printwx.cc:496
2810#: n:389
2811msgid "input datum as string to pass to PROJ"
2812msgstr ""
2813
2814#: ../src/readval.c:338
2815#: n:392
2816msgid "Separator in survey name"
2817msgstr ""
2818
2819#: ../src/readval.c:124
2820#: ../src/readval.c:139
2821#: ../src/readval.c:156
2822#: n:3
2823msgid "Can't have a leg between two anonymous stations"
2824msgstr ""
2825
2826#: ../src/dump3d.c:51
2827#: n:396
2828msgid "show survey date information (if present)"
2829msgstr ""
2830
2831#: ../src/mainfrm.cc:831
2832#: n:406
2833msgid "Spla&y Legs"
2834msgstr ""
2835
2836#: ../src/mainfrm.cc:828
2837#: n:407
2838msgid "&Hide"
2839msgstr "隐藏(&H)"
2840
2841#: ../src/mainfrm.cc:829
2842#: n:408
2843msgid "&Fade"
2844msgstr ""
2845
2846#: ../src/mainfrm.cc:830
2847#: n:409
2848msgid "&Show"
2849msgstr ""
2850
2851#: ../src/printwx.cc:346
2852#: n:410
2853msgid "Export format"
2854msgstr "导出格式"
Note: See TracBrowser for help on using the repository browser.