source: git/lib/sk.po @ c6a54a8

line_contentsstereotravis-osx
Last change on this file since c6a54a8 was c6a54a8, checked in by Olly Betts <olly@…>, 5 years ago

lib/: Update source references and TRANSLATORS comments.

  • Property mode set to 100644
File size: 81.7 KB
Line 
1msgid ""
2msgstr ""
3"Project-Id-Version: survex\n"
4"Report-Msgid-Bugs-To: olly@survex.com\n"
5"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6"PO-Revision-Date: 2014-01-16 03:17:10 +0000\n"
7"Last-Translator: Martin Sluka <martinsluka@mac.com>\n"
8"Language-Team: \n"
9"MIME-Version: 1.0\n"
10"Content-Type: text/plain; charset=utf-8\n"
11"Content-Transfer-Encoding: 8bit\n"
12"Language: sk\n"
13
14#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
15#. accelerator key.  The accelerators must be different within this group
16#: ../src/mainfrm.cc:982
17#: n:210
18msgid "&File"
19msgstr "&Súbor"
20
21#: ../src/mainfrm.cc:983
22#: n:211
23msgid "&Rotation"
24msgstr "&Rotácia"
25
26#: ../src/mainfrm.cc:984
27#: n:212
28msgid "&Orientation"
29msgstr "&Orientácia"
30
31#: ../src/mainfrm.cc:985
32#: n:213
33msgid "&View"
34msgstr "&Pohľad"
35
36#: ../src/mainfrm.cc:987
37#: n:214
38msgid "&Controls"
39msgstr "O&vládanie"
40
41#: ../src/mainfrm.cc:996
42#: n:215
43msgid "&Help"
44msgstr "&Help"
45
46#: ../src/mainfrm.cc:989
47#: n:216
48msgid "&Presentation"
49msgstr "Pre&zentácia"
50
51#. TRANSLATORS: as in: Usage: cavern …
52#: ../src/cmdline.c:168
53#: n:49
54msgid "Usage"
55msgstr "Použitie"
56
57#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
58#. was trying to allocate space for.
59#: ../src/message.c:85
60#: n:1
61#, c-format
62msgid "Out of memory (couldn’t find %lu bytes)."
63msgstr "Nedostatok pamäte (chýba %lu bytov)."
64
65#. TRANSLATORS: %s will be replaced by the filename that we were trying
66#. to read when we ran out of memory.
67#: ../src/img_hosted.c:34
68#: n:38
69#, fuzzy, c-format
70msgid "Out of memory trying to read file “%s”"
71msgstr "Nedostatočná pamäť: “%s”"
72
73#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
74#. greater" if that gives a more natural translation.  It's
75#. technically not quite right when there are parallel active release
76#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
77#. seems unlikely to confuse users.  "Survex" is the name of the
78#. software, so should not be translated.
79#.
80#. Here "survey" is a "cave map" rather than list of questions - it should be
81#. translated to the terminology that cavers using the language would use.
82#: ../src/commands.c:2059
83#: n:2
84#, c-format
85msgid "Survex version %s or greater required to process this survey data."
86msgstr "Pre spracovanie týchto dát je potrebná verzia Survexu %s alebo novšia."
87
88#. TRANSLATORS: Indicates a warning message e.g.:
89#. "spoon.svx:12: warning: *prefix is deprecated"
90#: ../src/aven.cc:397
91#: ../src/cavernlog.cc:245
92#: ../src/message.c:1272
93#: n:4
94msgid "warning"
95msgstr "varovanie"
96
97#. TRANSLATORS: Indicates an error message e.g.:
98#. "spoon.svx:13:4: error: Field may not be omitted"
99#: ../src/cavernlog.cc:244
100#: ../src/message.c:1276
101#: n:93
102msgid "error"
103msgstr "chyba"
104
105#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
106#. by the line number in that file.  Your translation should also contain
107#. %s:%u so that automatic parsing of error messages to determine the file
108#. and line number still works.
109#: ../src/datain.c:109
110#: n:5
111#, c-format
112msgid "In file included from %s:%u:\n"
113msgstr "V súbore vloženom z %s:%u:\n"
114
115#. TRANSLATORS: If you're unsure what "deprecated" means, see:
116#. http://en.wikipedia.org/wiki/Deprecation
117#: ../src/commands.c:589
118#: n:6
119msgid "*prefix is deprecated - use *begin and *end instead"
120msgstr "*prefix bol odmietnutý - použijte namiesto toho *begin a *end"
121
122#. TRANSLATORS: Here "station" is a survey station, not a train station.
123#: ../src/readval.c:206
124#: n:7
125#, c-format
126msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
127msgstr "Znak “%c” v mene bodu nie je povolený (použijte *SET NAMES pre nastavenie povolených znakov)"
128
129#: ../src/readval.c:387
130#: n:8
131msgid "Field may not be omitted"
132msgstr "Pole by nemalo zostať nevyplnené"
133
134#: ../src/datain.c:1553
135#: ../src/datain.c:1839
136#: ../src/readval.c:389
137#: ../src/readval.c:430
138#: ../src/readval.c:460
139#: n:9
140#, c-format
141msgid "Expecting numeric field, found “%s”"
142msgstr "predpokladá sa numerické pole, zistené “%s”"
143
144#: ../src/commands.c:1657
145#: n:10
146#, c-format
147msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
148msgstr "Zistené “%s”, predpokladá sa “PRESERVE”, “TOUPPER” alebo “TOLOWER”"
149
150#: ../src/debug.h:45
151#: ../src/debug.h:47
152#: ../src/matrix.c:352
153#: ../src/message.c:238
154#: n:11
155msgid "Bug in program detected! Please report this to the authors"
156msgstr "Zistená chyba programu! Prosíme, dajte to na vedomie autorom"
157
158#: ../src/commands.c:2174
159#: ../src/extend.c:436
160#: n:12
161#, c-format
162msgid "Unknown command “%s”"
163msgstr "Neznámy príkaz “%s”"
164
165#. TRANSLATORS: Here "station" is a survey station, not a train station.
166#: ../src/netbits.c:449
167#: n:13
168#, c-format
169msgid "Station “%s” equated to itself"
170msgstr "Bod “%s” je totožný sám so sebou"
171
172#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
173#. survey stations.
174#: ../src/datain.c:1073
175#: n:14
176msgid "Compass reading may not be omitted except on plumbed legs"
177msgstr "Nemalo by chýbať čítanie kompasu pokiaľ nejde o vertikálnu zámeru"
178
179#: ../src/datain.c:284
180#: ../src/extend.c:441
181#: n:15
182msgid "End of line not blank"
183msgstr "Koniec riadku obsahuje nepatričný znak"
184
185#: ../src/cavern.c:393
186#: n:16
187#, c-format
188msgid "There were %d warning(s)."
189msgstr "Celkom bolo zaznamenaných %d varovaní."
190
191#. TRANSLATORS: %s is replaced by the command we attempted to run.
192#: ../src/cavernlog.cc:176
193#: ../src/cavernlog.cc:236
194#: n:17
195#, c-format
196msgid "Couldn’t run external command: “%s”"
197msgstr "Vykonávanie príkazu “%s” zlyhalo"
198
199#: ../src/datain.c:80
200#: ../src/datain.c:88
201#: ../src/datain.c:95
202#: ../src/datain.c:770
203#: ../src/extend.c:559
204#: ../src/sorterr.c:80
205#: ../src/sorterr.c:97
206#: ../src/sorterr.c:240
207#: n:18
208msgid "Error reading file"
209msgstr "Chyba pri čítaní súboru"
210
211#: ../src/message.c:1292
212#: n:19
213msgid "Too many errors - giving up"
214msgstr "Príliš mnoho chýb, koniec"
215
216#. TRANSLATORS: If you're unsure what "deprecated" means, see:
217#. http://en.wikipedia.org/wiki/Deprecation
218#: ../src/commands.c:1536
219#: n:20
220msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
221msgstr "*DEFAULT bol odmietnutý - použijte namiesto toho *CALIBRATE/DATA/SD/UNITS s argumentom DEFAULT"
222
223#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
224#. (a weight on a string).  So the problem here is that the leg is
225#. vertical, so a compass reading has no meaning!
226#: ../src/datain.c:1044
227#: n:21
228msgid "Compass reading given on plumbed leg"
229msgstr "Pri vertikálnej zámere bol zadaný azimut"
230
231#: ../src/commands.c:677
232#: n:22
233msgid "END with no matching BEGIN in this file"
234msgstr "V tomto súbore sa vyskytlo END bez odpovadajúceho BEGIN"
235
236#: ../src/datain.c:757
237#: n:23
238msgid "BEGIN with no matching END in this file"
239msgstr "V tomto súbore sa vyskytlo BEGIN bez odpovadajúceho END"
240
241#. TRANSLATORS: A station must be exported out of each level it is in, so
242#. this would give "Station “\outer.inner.1” not exported from survey
243#. “\outer”)":
244#.
245#. *equate entrance outer.inner.1
246#. *begin outer
247#. *begin inner
248#. *export 1
249#. 1 2 1.23 045 -6
250#. *end inner
251#. *end outer
252#.
253#. Here "survey" is a "cave map" rather than list of questions - it should be
254#. translated to the terminology that cavers using the language would use.
255#: ../src/commands.c:993
256#: ../src/commands.c:995
257#: ../src/listpos.c:104
258#: ../src/readval.c:328
259#: ../src/readval.c:331
260#: n:26
261#, c-format
262msgid "Station “%s” not exported from survey “%s”"
263msgstr "Bod “%s” nebol exportovaný z merania (survey) “%s”"
264
265#. TRANSLATORS: This error occurs if there's an attempt to
266#. export a station from a survey which doesn't actually exist.
267#.
268#. Here "survey" is a "cave map" rather than list of questions - it should be
269#. translated to the terminology that cavers using the language would use.
270#: ../src/listpos.c:112
271#: n:286
272#, c-format
273msgid "Reference to station “%s” from non-existent survey “%s”"
274msgstr "Odkaz na bod “%s” z neexistujúceho survey “%s”"
275
276#. TRANSLATORS: Here "station" is a survey station, not a train station.
277#.
278#. Here "survey" is a "cave map" rather than list of questions - it should be
279#. translated to the terminology that cavers using the language would use.
280#: ../src/readval.c:302
281#: n:27
282#, c-format
283msgid "“%s” can’t be both a station and a survey"
284msgstr "“%s” nemôže byť súčasne bodom i meraním (survey)"
285
286#. TRANSLATORS: Here "station" is a survey station, not a train station.
287#: ../src/extend.c:248
288#: ../src/extend.c:267
289#: ../src/extend.c:312
290#: ../src/extend.c:354
291#: ../src/extend.c:396
292#: ../src/readval.c:202
293#: n:28
294msgid "Expecting station name"
295msgstr "Predpokladá sa meno bodu"
296
297#: ../src/commands.c:1985
298#: n:31
299#, c-format
300msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
301msgstr "Zistené “%s”, predpokladané “EQUATES”, “EXPORTS” alebo “PLUMBS”"
302
303#: ../src/commands.c:1992
304#: n:32
305#, c-format
306msgid "Found “%s”, expecting “ON” or “OFF”"
307msgstr "Zistené “%s”, predpokladané “ON” alebo “OFF”"
308
309#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
310#. translated.
311#.
312#. Here "station" is a survey station, not a train station.
313#: ../src/commands.c:953
314#: n:33
315msgid "Only one station in EQUATE command"
316msgstr "V zozname EQUATE zistený iba jeden bod"
317
318#. TRANSLATORS: A "quantity" is something measured like "LENGTH",
319#. "BEARING", "ALTITUDE", etc.
320#: ../src/commands.c:439
321#: n:34
322#, c-format
323msgid "Unknown quantity “%s”"
324msgstr "Neznáma hodnota “%s”"
325
326#: ../src/commands.c:354
327#: n:35
328#, c-format
329msgid "Unknown units “%s”"
330msgstr "Neznáma jednotka “%s”"
331
332#: ../src/commands.c:1825
333#: ../src/commands.c:1900
334#: n:434
335msgid "Unknown coordinate system"
336msgstr ""
337
338#: ../src/commands.c:1920
339#: ../src/commands.c:1945
340#: n:443
341#, c-format
342msgid "Invalid coordinate system: %s"
343msgstr ""
344
345#: ../src/commands.c:1907
346#: ../src/commands.c:1925
347#: n:435
348msgid "Coordinate system unsuitable for output"
349msgstr ""
350
351#: ../src/commands.c:853
352#: n:436
353msgid "Failed to convert coordinates"
354msgstr ""
355
356#: ../src/commands.c:858
357#: n:437
358msgid "The input projection is set but the output projection isn't"
359msgstr ""
360
361#: ../src/commands.c:860
362#: n:438
363msgid "The output projection is set but the input projection isn't"
364msgstr ""
365
366#: ../src/commands.c:760
367#: n:439
368msgid "Coordinates can't be omitted when coordinate system has been specified"
369msgstr ""
370
371#. TRANSLATORS: Used when a BEGIN command has no survey, but the
372#. END command does, e.g.:
373#.
374#. *begin
375#. 1 2 10.00 178 -01
376#. *end entrance      <--[Message given here]
377#: ../src/commands.c:699
378#: n:36
379#, fuzzy
380msgid "Matching BEGIN command has no survey name"
381msgstr "Odpovedajúci tag BEGIN nemá prefix"
382
383#. TRANSLATORS: Note: In English you talk about the *units* of a single
384#. measurement, but the correct term in other languages may be singular.
385#: ../src/commands.c:367
386#: n:37
387#, c-format
388msgid "Invalid units “%s” for quantity"
389msgstr "Nesprávna jednotka “%s” pre hodnotu"
390
391#: ../src/commands.c:430
392#: n:39
393#, c-format
394msgid "Unknown instrument “%s”"
395msgstr "Neznáma pomôcka “%s”"
396
397#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
398#. translate
399#: ../src/commands.c:1504
400#: n:40
401msgid "Scale factor must be 1.0 for DECLINATION"
402msgstr "Prepočítací faktor pre DECLINATION musí byť 1.0"
403
404#. TRANSLATORS: If the scale factor for an instrument is zero, then any
405#. reading would be mapped to zero, which doesn't make sense.
406#: ../src/commands.c:1510
407#: n:391
408msgid "Scale factor must be non-zero"
409msgstr "Prepočítací faktor musí byť nenulový"
410
411#: ../src/commands.c:1555
412#: n:41
413#, c-format
414msgid "Unknown setting “%s”"
415msgstr "Neznáme nastavenie “%s”"
416
417#: ../src/commands.c:477
418#: n:42
419#, c-format
420msgid "Unknown character class “%s”"
421msgstr "Neznáma trieda charakteru “%s”"
422
423#: ../src/extend.c:605
424#: ../src/netskel.c:90
425#: n:43
426msgid "No survey data"
427msgstr "Chýbajú údaje z merania"
428
429#: ../src/filename.c:52
430#: ../src/img_hosted.c:35
431#: n:44
432#, c-format
433msgid "Filename “%s” refers to directory"
434msgstr "Meno súboru “%s” odpovedá adresáru"
435
436#. TRANSLATORS: At the end of processing (or if a *SOLVE command is used)
437#. cavern will issue this error if there are any sections of the survey
438#. network which are hanging.
439#: ../src/netartic.c:387
440#: n:45
441msgid "Survey not all connected to fixed stations"
442msgstr "Časti merania nie sú pripojené na fixné body"
443
444#: ../src/commands.c:883
445#: ../src/datain.c:682
446#: n:46
447msgid "Station already fixed or equated to a fixed point"
448msgstr "Bod je už fixný alebo je totožný s fixným bodom"
449
450#: ../src/cavern.c:298
451#: ../src/filename.c:55
452#: ../src/img_hosted.c:36
453#: n:47
454#, c-format
455msgid "Failed to open output file “%s”"
456msgstr "Zlyhal pokus o otvorenie výstupného súboru  “%s”"
457
458#: ../src/commands.c:1610
459#: n:48
460msgid "Standard deviation must be positive"
461msgstr "Štandardná ochylka musí byť pozitívna"
462
463#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
464#. "survey stations".
465#.
466#. %s is replaced by the name of the station.
467#: ../src/netbits.c:346
468#: n:50
469#, c-format
470msgid "Survey leg with same station (“%s”) at both ends - typing error?"
471msgstr "Zámera s tým istým bodom (“%s”) na oboch koncoch - preklep?"
472
473#. TRANSLATORS: %.f%s will be replaced with a right angle in the
474#. units currently in use, e.g. "90°" or "100ᵍ".  And "absolute
475#. value" means the reading ignoring the sign (so it might be
476#. < -90° or > 90°.
477#: ../src/datain.c:979
478#: ../src/datain.c:992
479#: ../src/datain.c:1010
480#: n:51
481#, c-format
482msgid "Clino reading over %.f%s (absolute value)"
483msgstr "Absolútna hodnota sklonu väčšia ako %.f%s"
484
485#: ../src/netbits.c:464
486#: n:52
487#, c-format
488msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
489msgstr "Pokus o ztotožnenie dvoch rôznych fixných bodov “%s” a “%s”"
490
491#. TRANSLATORS: "equal" as in:
492#.
493#. *fix a 1 2 3
494#. *fix b 1 2 3
495#. *equate a b
496#: ../src/netbits.c:475
497#: n:53
498#, c-format
499msgid "Equating two equal fixed points: “%s” and “%s”"
500msgstr "Ztotožnenie dvoch identických fixných bodov “%s” a “%s”"
501
502#. TRANSLATORS: " *fix a " gives this message:
503#: ../src/commands.c:770
504#: n:54
505msgid "FIX command with no coordinates - fixing at (0,0,0)"
506msgstr "Príkaz FIX bez odpovedajúcich súradníc - priradené (0,0,0)"
507
508#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
509#: ../src/commands.c:887
510#: ../src/datain.c:684
511#: n:55
512msgid "Station already fixed at the same coordinates"
513msgstr "Bod už bol fixovaný s tými istými súradnicami"
514
515#. TRANSLATORS: Emitted after second and subsequent "FIX command with
516#. no coordinates - fixing at (0,0,0)" warnings.
517#: ../src/commands.c:778
518#: n:441
519#, fuzzy, c-format
520msgid "Already had FIX command with no coordinates for station “%s”"
521msgstr "Viac ako jeden príkaz FIX bez súradníc: “%s”"
522
523#: ../src/commands.c:1710
524#: n:442
525#, c-format
526msgid "Station “%s” fixed before CS command first used"
527msgstr ""
528
529#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
530#. <SURVEY>, so this would generate this error:
531#.
532#. *begin fred
533#. 1 2 1.23 045 -6
534#. *export 2
535#. *end fred
536#: ../src/commands.c:2188
537#: n:57
538msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
539msgstr "*EXPORT musí bezprostredne nasledovať “*BEGIN <SURVEY>”"
540
541#: ../src/readval.c:516
542#: n:58
543msgid "Invalid year (< 1900 or > 2078)"
544msgstr "Neplatný rok (< 1900 alebo > 2078)"
545
546#. TRANSLATORS: Suspicious means something like 410 degrees or -20
547#. degrees
548#: ../src/datain.c:871
549#: ../src/datain.c:880
550#: n:59
551msgid "Suspicious compass reading"
552msgstr "Podozrivé čítanie kompasu"
553
554#: ../src/datain.c:1529
555#: n:60
556msgid "Negative tape reading"
557msgstr "Záporný dļžkový údaj"
558
559#: ../src/commands.c:765
560#: n:61
561msgid "Same station fixed twice with no coordinates"
562msgstr "Niektorý z bodov bol fixovaný dvakrát bez súradníc"
563
564#. TRANSLATORS: This means that the data fed in said this.
565#.
566#. It could be a gross error (e.g. the decimal point is missing from the
567#. depth gauge reading) or it could just be due to random error on a near
568#. vertical leg
569#: ../src/datain.c:1228
570#: n:62
571msgid "Tape reading is less than change in depth"
572msgstr "Dļžkový údaj je menší ako výškový rozdiel"
573
574#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
575#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
576#. neither style nor reading is a keyword in the program This error
577#. complains about a depth gauge reading in normal style, for example
578#: ../src/commands.c:1214
579#: n:63
580#, c-format
581msgid "Reading “%s” not allowed in data style “%s”"
582msgstr "Hodnota “%s” nie je povolená v type dát “%s”"
583
584#. TRANSLATORS: i.e. not enough readings for the style.
585#: ../src/commands.c:1404
586#: n:64
587#, c-format
588msgid "Too few readings for data style “%s”"
589msgstr "Príliš málo údajov pre typ dát “%s”"
590
591#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
592#: ../src/commands.c:1174
593#: n:65
594#, c-format
595msgid "Data style “%s” unknown"
596msgstr "Neznámy typ dát “%s”"
597
598#. TRANSLATORS: Here "station" is a survey station, not a train station.
599#.
600#. Exporting a station twice gives this error:
601#.
602#. *begin example
603#. *export 1
604#. *export 1
605#. 1 2 1.24 045 -6
606#. *end example
607#: ../src/commands.c:1044
608#: n:66
609#, c-format
610msgid "Station “%s” already exported"
611msgstr "Bod “%s” už bol vyexportovaný"
612
613#. TRANSLATORS: complains about a situation like trying to define
614#. two from stations per leg
615#: ../src/commands.c:1240
616#: n:67
617#, c-format
618msgid "Duplicate reading “%s”"
619msgstr "Duplicitná hodnota “%s”"
620
621#: ../src/commands.c:914
622#: n:68
623#, c-format
624msgid "FLAG “%s” unknown"
625msgstr "FLAG “%s” je neznámy"
626
627#: ../src/readval.c:474
628#: n:69
629msgid "Missing \""
630msgstr "Chýba \""
631
632#. TRANSLATORS: Here "station" is a survey station, not a train station.
633#: ../src/listpos.c:122
634#: n:70
635#, fuzzy, c-format
636msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
637msgstr "Bod “%s” použitý iba raz s explicitným prefixom - preklep?"
638
639#. TRANSLATORS: Here "station" is a survey station, not a train
640#. station.
641#: ../src/netartic.c:399
642#: n:71
643msgid "The following survey stations are not attached to a fixed point:"
644msgstr "Nasledujúci body nie sú pripojené na fixný bod"
645
646#: ../src/netskel.c:135
647#: n:72
648#, c-format
649msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
650msgstr "Meranie (survey) nemá fixné body. Preto bude fixovaný %s so súradnicami (0,0,0)"
651
652#. TRANSLATORS: fixed survey station that is not part of any survey
653#: ../src/netskel.c:958
654#: n:73
655#, c-format
656msgid "Unused fixed point “%s”"
657msgstr "Nepoužitý fixný bod “%s”"
658
659#: ../src/matrix.c:123
660#: n:74
661msgid "Network solved by reduction - no simultaneous equations to solve."
662msgstr "Sieť vyriešená redukciou - nie je treba riešiť simultánne rovnice"
663
664#: ../src/matrix.c:134
665#: n:75
666#, c-format
667msgid "Solving %d simultaneous equations"
668msgstr "Rieši sa %d simultánnych rovníc"
669
670#. TRANSLATORS: This is an error from the *DATA command.  It
671#. means that a reading (which will appear where %s is isn't
672#. valid as the list of readings has already included the same
673#. reading, or an equivalent one (e.g. you can't have both
674#. DEPTH and DEPTHCHANGE together).
675#: ../src/commands.c:1307
676#: n:77
677#, c-format
678msgid "Reading “%s” duplicates previous reading(s)"
679msgstr "Údaj “%s” duplikuje predchádzajúci údaj/e"
680
681#: ../src/matrix.c:132
682#: n:78
683msgid "Solving one equation"
684msgstr "Rieši sa jedna rovnica"
685
686#: ../src/datain.c:945
687#: ../src/datain.c:1217
688#: ../src/datain.c:1410
689#: n:79
690msgid "Negative adjusted tape reading"
691msgstr "Záporná nastavená vzdialenosť"
692
693#: ../src/commands.c:2096
694#: ../src/commands.c:2116
695#: n:80
696msgid "Date is in the future!"
697msgstr "Dátum je v budúcnosti!"
698
699#: ../src/commands.c:2120
700#: n:81
701msgid "End of date range is before the start"
702msgstr "Posledný dátum je pred prvým"
703
704#. TRANSLATORS: e.g. the user specifies a passage cross-section at
705#. station "entrance.27", but there is no station "entrance.27" in
706#. the centre-line.
707#: ../src/netskel.c:1046
708#: n:83
709#, c-format
710msgid "Cross section specified at non-existent station “%s”"
711msgstr "Priečny rez definovaný na neexistujúcom bode “%s”"
712
713#. TRANSLATORS: In data with backsights, the user has tried to give a
714#. plumb for the foresight and a clino reading for the backsight, or
715#. something similar.
716#: ../src/datain.c:1028
717#: ../src/datain.c:1052
718#: n:84
719msgid "CLINO and BACKCLINO readings must be of the same type"
720msgstr "Hodnoty CLINO a BACKCLINO musí byť toho istého typu"
721
722#: ../src/readval.c:524
723#: n:86
724msgid "Invalid month"
725msgstr "Nesprávny mesiac"
726
727#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
728#: ../src/readval.c:533
729#: n:87
730msgid "Invalid day of the month"
731msgstr "Tento deň v tomto mesiaci neexistuje"
732
733#: ../src/cavern.c:247
734#: n:88
735#, c-format
736msgid "3d file format versions %d to %d supported"
737msgstr "Sú podporované 3D formáty súborov %d až %d"
738
739#: ../src/readval.c:200
740#: n:89
741msgid "Expecting survey name"
742msgstr "Predpokladá sa názov survey"
743
744#: ../src/datain.c:401
745#: ../src/extend.c:554
746#: ../src/img_hosted.c:30
747#: ../src/mainfrm.cc:426
748#: ../src/sorterr.c:146
749#: n:24
750#, c-format
751msgid "Couldn’t open file “%s”"
752msgstr "Nie je možné otvoriť súbor “%s”"
753
754#: ../src/printwx.cc:687
755#: n:402
756#, c-format
757msgid "Couldn’t write file “%s”"
758msgstr "Súbor “%s” sa nedá zapísať"
759
760#. TRANSLATORS: If you're unsure what "deprecated" means, see:
761#. http://en.wikipedia.org/wiki/Deprecation
762#: ../src/commands.c:496
763#: ../src/commands.c:569
764#: ../src/commands.c:591
765#: ../src/commands.c:1189
766#: ../src/commands.c:1538
767#: ../src/readval.c:96
768#: n:95
769msgid "Further uses of this deprecated feature will not be reported"
770msgstr "Ďalšie použitia zamietnutej fukcie nebudú zaznamenané"
771
772#. TRANSLATORS: %s is replaced by the amount the readings disagree
773#. by, e.g. "2.5°" or "3ᵍ".
774#: ../src/datain.c:910
775#: n:98
776#, c-format
777msgid "COMPASS reading and BACKCOMPASS reading disagree by %s"
778msgstr "Hodnoty COMPASS a BACKCOMPASS sa líši o %s"
779
780#. TRANSLATORS: %s is replaced by the amount the readings disagree
781#. by, e.g. "2.5°" or "3ᵍ".
782#: ../src/datain.c:1104
783#: n:99
784#, c-format
785msgid "CLINO reading and BACKCLINO reading disagree by %s"
786msgstr "Hodnoty CLINO a BACKCLINO sa líši o %s"
787
788#: ../src/commands.c:1186
789#: n:104
790#, c-format
791msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
792msgstr "“*data %s %c …” boly zamietnuté - použijte “*data %s …” namiesto toho"
793
794#. TRANSLATORS: Perhaps the user tried to load a different type of file as
795#. a Survex .3d file, or the .3d file was corrupted.
796#: ../src/3dtopos.c:157
797#: ../src/3dtopos.c:163
798#: ../src/cad3d.c:909
799#: ../src/cad3d.c:920
800#: ../src/img_hosted.c:39
801#: n:106
802#, c-format
803msgid "Bad 3d image file “%s”"
804msgstr "Nesprávny 3D obrazový súbor  “%s”"
805
806#. TRANSLATORS: This is the date format string used to timestamp .3d
807#. files internally.  Probably best to keep it the same for all
808#. translations.
809#: ../src/img.c:43
810#: ../src/mainfrm.cc:1460
811#: n:107
812#, c-format
813msgid "%a,%Y.%m.%d %H:%M:%S %Z"
814msgstr "%a,%Y.%m.%d %H:%M:%S %Z"
815
816#. TRANSLATORS: used a processed survey with no processing date/time info
817#: ../src/mainfrm.cc:1453
818#: n:108
819msgid "Date and time not available."
820msgstr "Dátum a čas nie sú dostupné"
821
822#: ../src/img_hosted.c:40
823#: n:109
824#, c-format
825msgid "Error reading from file “%s”"
826msgstr "Chyba pri čítaní zo súboru “%s”"
827
828#: ../src/cavernlog.cc:522
829#: ../src/filename.c:79
830#: ../src/img_hosted.c:41
831#: ../src/mainfrm.cc:384
832#: ../src/mainfrm.cc:2018
833#: n:110
834#, c-format
835msgid "Error writing to file “%s”"
836msgstr "Chyba pri zápise do súboru “%s”"
837
838#: ../src/filename.c:82
839#: n:111
840msgid "Error writing to file"
841msgstr "Chyba pri zápise do súboru"
842
843#: ../src/cavern.c:388
844#: n:113
845#, c-format
846msgid "There were %d warning(s) and %d error(s) - no output files produced."
847msgstr "Vyskytlo sa %d varovaní a %d chýb - nebol vytvorený výstupný súbor."
848
849#: ../src/img_hosted.c:42
850#: n:114
851#, c-format
852msgid "File “%s” has a newer format than this program can understand"
853msgstr "Súbor “%s” má novší formát, než je tento program schopný zpracovať"
854
855#: ../src/printwx.cc:1035
856#: n:115
857msgid "North"
858msgstr "Sever"
859
860#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
861#: ../src/printwx.cc:1060
862#: n:116
863msgid "Elevation on"
864msgstr "Profil v smere"
865
866#: ../src/printwx.cc:489
867#: n:117
868msgid "P&lan view"
869msgstr "&Pôdorys"
870
871#: ../src/printwx.cc:491
872#: n:285
873msgid "&Elevation"
874msgstr "P&rofil"
875
876#: ../src/gfxcore.cc:806
877#: ../src/mainfrm.cc:167
878#: n:118
879msgid "Elevation"
880msgstr "Profil"
881
882#. TRANSLATORS: Label used for "clino" in Aven when the view is
883#. from directly above.
884#: ../src/gfxcore.cc:718
885#: n:432
886msgid "Plan"
887msgstr "Pôdorys"
888
889#. TRANSLATORS: Label used for "clino" in Aven when the view is
890#. from directly below.
891#: ../src/gfxcore.cc:728
892#: n:433
893msgid "Kiwi Plan"
894msgstr ""
895
896#: ../src/cavern.c:352
897#: n:120
898msgid "Calculating statistics"
899msgstr "Počíta sa štatistika"
900
901#: ../src/readval.c:489
902#: n:121
903msgid "Expecting string field"
904msgstr "Predpokladá sa textové pole"
905
906#: ../src/cmdline.c:212
907#: n:122
908msgid "too few arguments"
909msgstr "Príliš málo argumentov"
910
911#: ../src/cmdline.c:219
912#: n:123
913msgid "too many arguments"
914msgstr "Príliš mnoho argumentov"
915
916#: ../src/cmdline.c:178
917#: ../src/cmdline.c:181
918#: ../src/cmdline.c:185
919#: n:124
920msgid "FILE"
921msgstr "SÚBOR"
922
923#. TRANSLATORS: In French, Eric chose to use the terminology used by
924#. toporobot: "sequence" for the English "traverse", which makes sense
925#. (although toporobot actually uses this term to mean something more
926#. specific).  Feel free to follow this lead if you can't think of a better
927#. term - these messages mostly indicate how processing is progressing.
928#.
929#. A trailing traverse is a dead end back to a junction.
930#: ../src/netskel.c:177
931#: n:125
932msgid "Removing trailing traverses"
933msgstr "Odstránenie slepých odbočiek"
934
935#. TRANSLATORS: In French, Eric chose to use the terminology used by
936#. toporobot: "sequence" for the English "traverse", which makes sense
937#. (although toporobot actually uses this term to mean something more
938#. specific).  Feel free to follow this lead if you can't think of a better
939#. term - these messages mostly indicate how processing is progressing.
940#: ../src/netskel.c:236
941#: n:126
942msgid "Concatenating traverses"
943msgstr "Pripojenie spojok"
944
945#. TRANSLATORS: In French, Eric chose to use the terminology used by
946#. toporobot: "sequence" for the English "traverse", which makes sense
947#. (although toporobot actually uses this term to mean something more
948#. specific).  Feel free to follow this lead if you can't think of a better
949#. term - these messages mostly indicate how processing is progressing.
950#: ../src/netskel.c:434
951#: n:127
952msgid "Calculating traverses"
953msgstr "Výpočet spojok"
954
955#. TRANSLATORS: In French, Eric chose to use the terminology used by
956#. toporobot: "sequence" for the English "traverse", which makes sense
957#. (although toporobot actually uses this term to mean something more
958#. specific).  Feel free to follow this lead if you can't think of a better
959#. term - these messages mostly indicate how processing is progressing.
960#.
961#. A trailing traverse is a dead end back to a junction.
962#: ../src/netskel.c:779
963#: n:128
964msgid "Calculating trailing traverses"
965msgstr "Výpočet koncových spojok"
966
967#: ../src/network.c:82
968#: n:129
969msgid "Simplifying network"
970msgstr "Zjednodušenie siete"
971
972#: ../src/network.c:540
973#: n:130
974msgid "Calculating network"
975msgstr "Výpočet siete"
976
977#: ../src/datain.c:1519
978#: n:131
979#, c-format
980msgid "Found “%s”, expecting “F” or “B”"
981msgstr "Nájdené “%s”, očakávané “F” alebo “B”"
982
983#: ../src/cavern.c:454
984#: n:132
985#, c-format
986msgid "Total length of survey legs = %7.2f%s (%7.2f%s adjusted)"
987msgstr "Celková dļžka zámer = %7.2f%s (%7.2f%s nastavené)"
988
989#: ../src/cavern.c:457
990#: n:133
991#, c-format
992msgid "Total plan length of survey legs = %7.2f%s"
993msgstr "Celková pôdorysná dļžka zámer %7.2f%s"
994
995#: ../src/cavern.c:460
996#: n:134
997#, c-format
998msgid "Total vertical length of survey legs = %7.2f%s"
999msgstr "Celková vertikálna dļžka zámer %7.2f%s"
1000
1001#. TRANSLATORS: numbers are altitudes of highest and lowest stations
1002#: ../src/cavern.c:467
1003#: n:135
1004#, c-format
1005msgid "Vertical range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1006msgstr "Vertikálny rozsah = %4.2f%s (od %s v %4.2f%s do %s v %4.2f%s)"
1007
1008#. TRANSLATORS: c.f. previous message
1009#: ../src/cavern.c:470
1010#: n:136
1011#, c-format
1012msgid "North-South range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1013msgstr "Rozsah sever-juh = %4.2f%s (od %s od %4.2f%s do %s do %4.2f%s)"
1014
1015#. TRANSLATORS: c.f. previous two messages
1016#: ../src/cavern.c:473
1017#: n:137
1018#, c-format
1019msgid "East-West range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1020msgstr "Rozsah východ-západ = %4.2f%s (od %s od %4.2f%s do %s do %4.2f%s)"
1021
1022#: ../src/cavern.c:439
1023#: n:138
1024msgid "There is 1 loop."
1025msgstr "Jeden uzavretý polygón."
1026
1027#: ../src/cavern.c:441
1028#: n:139
1029#, c-format
1030msgid "There are %ld loops."
1031msgstr "%ld uzavretých polygónov."
1032
1033#: ../src/cavern.c:374
1034#: n:140
1035#, c-format
1036msgid "CPU time used %5.2fs"
1037msgstr "Využitý čas CPU %5.2fs"
1038
1039#: ../src/cavern.c:377
1040#: n:141
1041#, c-format
1042msgid "Time used %5.2fs"
1043msgstr "Celkový čas %5.2fs"
1044
1045#: ../src/cavern.c:379
1046#: n:142
1047msgid "Time used unavailable"
1048msgstr "Celkový čas - nedostupný"
1049
1050#: ../src/cavern.c:382
1051#: n:143
1052#, c-format
1053msgid "Time used %5.2fs (%5.2fs CPU time)"
1054msgstr "Celkový čas %5.2fs (%5.2fs času CPU)"
1055
1056#: ../src/netskel.c:744
1057#: n:145
1058#, c-format
1059msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1060msgstr "Pôvodná dļžka %6.2fm (%3d zámer), redukovaná %6.2fm (%5.2fm/zámeru). "
1061
1062#: ../src/netskel.c:747
1063#: n:146
1064#, c-format
1065msgid "Error %6.2f%%"
1066msgstr "Chyba %6.2f%%"
1067
1068#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1069#. traverse has zero length, so error per metre is meaningless.
1070#.
1071#. There should be 4 spaces between "Error" and "N/A" so that it lines
1072#. up with the numbers in the message above.
1073#: ../src/netskel.c:754
1074#: n:147
1075msgid "Error    N/A"
1076msgstr "Chyba (nemá zmysel)"
1077
1078#. TRANSLATORS: description of --help option
1079#: ../src/cmdline.c:138
1080#: n:150
1081msgid "display this help and exit"
1082msgstr "zobraziť túto nápovedu a skončiť"
1083
1084#. TRANSLATORS: description of --verbose option
1085#: ../src/cmdline.c:141
1086#: n:151
1087msgid "output version information and exit"
1088msgstr "zobraziť informáciu o verzii a skončiť"
1089
1090#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1091#: ../src/cmdline.c:170
1092#: n:153
1093msgid "OPTION"
1094msgstr "OPTION"
1095
1096#: ../src/mainfrm.cc:171
1097#: ../src/printwx.cc:435
1098#: ../src/printwx.cc:1097
1099#: ../src/printwx.cc:1146
1100#: n:154
1101msgid "Scale"
1102msgstr "Merítko"
1103
1104#: ../src/cmdline.c:194
1105#: n:157
1106#, c-format
1107msgid "Try “%s --help” for more information.\n"
1108msgstr "Viac informácií získate príkazom “%s --help”.\n"
1109
1110#: ../src/avenprcore.cc:169
1111#: n:166
1112#, c-format
1113msgid "Page %d of %d"
1114msgstr "Stránka  %d z %d"
1115
1116#: ../src/avenprcore.cc:172
1117#: ../src/printwx.cc:1542
1118#: n:167
1119#, c-format
1120msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1121msgstr "Meranie (survey) “%s”   Stránka %d (z %d)   Zpracované od stránky %s"
1122
1123#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1124#. something like "123°".  The bearing is up the page.
1125#: ../src/printwx.cc:1041
1126#: n:168
1127#, c-format
1128msgid "Plan view, %s up page"
1129msgstr "Mapa, %s v hlavičke"
1130
1131#. TRANSLATORS: This is used on printouts of elevations, with %s
1132#. replaced by something like "123°".  The bearing is the direction
1133#. we’re looking.
1134#: ../src/printwx.cc:1073
1135#: n:169
1136#, c-format
1137msgid "Elevation facing %s"
1138msgstr "Bočný pohľad v smere %s"
1139
1140#. TRANSLATORS: This is used on printouts of tilted elevations, with
1141#. the first %s replaced by something like "123°", and the second by
1142#. something like "-45°".  The bearing is the direction we’re
1143#. looking.
1144#: ../src/printwx.cc:1080
1145#: n:284
1146#, c-format
1147msgid "Elevation facing %s, tilted %s"
1148msgstr "Bočný pohľad v smere %s, pootočený o %s"
1149
1150#. TRANSLATORS: This is used on printouts of extended elevations.
1151#: ../src/printwx.cc:1089
1152#: n:191
1153msgid "Extended elevation"
1154msgstr "Rozvinutý rez"
1155
1156#: ../src/cavern.c:425
1157#: n:172
1158msgid "Survey contains 1 survey station,"
1159msgstr "Meranie (survey) obsahuje jediný bod,"
1160
1161#: ../src/cavern.c:427
1162#: n:173
1163#, c-format
1164msgid "Survey contains %ld survey stations,"
1165msgstr "Meranie (survey) obsahuje %ld bodov,"
1166
1167#: ../src/cavern.c:431
1168#: n:174
1169msgid " joined by 1 leg."
1170msgstr " spojených 1 zámerou."
1171
1172#: ../src/cavern.c:433
1173#: n:175
1174#, c-format
1175msgid " joined by %ld legs."
1176msgstr " spojených %ld zámerami."
1177
1178#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1179#: ../src/listpos.c:185
1180#: n:176
1181msgid "node"
1182msgstr "uzol"
1183
1184#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1185#: ../src/listpos.c:187
1186#: n:177
1187msgid "nodes"
1188msgstr "uzly"
1189
1190#. TRANSLATORS: "Connected component" in the graph theory sense - it
1191#. means there are %ld bits of survey with no connections between them.
1192#. This message is only used if there are more than 1.
1193#: ../src/cavern.c:450
1194#: n:178
1195#, c-format
1196msgid "Survey has %ld connected components."
1197msgstr "Meranie (survey) má %ld spojených častí."
1198
1199#. TRANSLATORS: Label for button in aven’s cavern log window which
1200#. allows the user to save the log to a file.
1201#: ../src/cavernlog.cc:456
1202#: n:446
1203msgid "Save Log"
1204msgstr "Uložiť Záznam"
1205
1206#. TRANSLATORS: Label for button in aven’s cavern log window which
1207#. causes the survey data to be reprocessed.
1208#: ../src/cavernlog.cc:463
1209#: ../src/cavernlog.cc:474
1210#: n:184
1211msgid "Reprocess"
1212msgstr "Spracuj dáta znova"
1213
1214#: ../src/cmdline.c:242
1215#: ../src/cmdline.c:261
1216#: n:185
1217#, c-format
1218msgid "numeric argument “%s” out of range"
1219msgstr "číselný argument “%s” mimo rozsah"
1220
1221#: ../src/cmdline.c:244
1222#: n:186
1223#, c-format
1224msgid "argument “%s” not an integer"
1225msgstr "argument “%s” nie je integer"
1226
1227#: ../src/cmdline.c:263
1228#: n:187
1229#, c-format
1230msgid "argument “%s” not a number"
1231msgstr "argument “%s” nie je číslo"
1232
1233#: ../src/commands.c:929
1234#: n:188
1235msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1236msgstr "predpokladá sa “DUPLICATE”, “SPLAY”, alebo “SURFACE”"
1237
1238#: ../src/commands.c:932
1239#: n:189
1240msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1241msgstr "Predpokladá sa “NOT”, “DUPLICATE”, “SPLAY”, alebo “SURFACE”"
1242
1243#: ../src/listpos.c:82
1244#: n:190
1245#, c-format
1246msgid "Station “%s” referred to by *entrance or *export but never used"
1247msgstr "Bod “%s” sa uvádza ako *entrance alebo *export ale nebol použitý"
1248
1249#: ../src/commands.c:675
1250#: n:192
1251msgid "No matching BEGIN"
1252msgstr "Chýba odpovedajúce BEGIN"
1253
1254#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
1255#. same <survey> if it’s given at all
1256#: ../src/commands.c:703
1257#: n:193
1258#, fuzzy
1259msgid "Survey name doesn’t match BEGIN"
1260msgstr "Prefix tag neodpovedá BEGIN"
1261
1262#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1263#. END command omits it, e.g.:
1264#.
1265#. *begin entrance
1266#. 1 2 10.00 178 -01
1267#. *end     <--[Message given here]
1268#: ../src/commands.c:712
1269#: n:194
1270#, fuzzy
1271msgid "Survey name omitted from END"
1272msgstr "Koncový prefix chýba v END"
1273
1274#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the “,”s
1275#. (or at least the columns) are in the same place
1276#: ../src/3dtopos.c:112
1277#: n:195
1278msgid "( Easting, Northing, Altitude )"
1279msgstr "( východ,  sever,    výška    )"
1280
1281#. TRANSLATORS: bpp is "Bits Per Pixel"
1282#: ../src/aboutdlg.cc:181
1283#: n:196
1284#, c-format
1285msgid "Display Depth: %d bpp"
1286msgstr "Rozsah zobrazenia %d v bitoch na pixel)"
1287
1288#. TRANSLATORS: appended to previous message if the display is colour
1289#: ../src/aboutdlg.cc:183
1290#: n:197
1291msgid " (colour)"
1292msgstr " (pre farbu)"
1293
1294#: ../src/readval.c:512
1295#: ../src/readval.c:522
1296#: ../src/readval.c:530
1297#: n:198
1298#, c-format
1299msgid "Expecting date, found “%s”"
1300msgstr "Predpokladá sa čas, najdené “%s”"
1301
1302#. TRANSLATORS: --help output for --survey option.
1303#.
1304#. "this" has been added to English translation
1305#: ../src/3dtopos.c:50
1306#: ../src/aven.cc:66
1307#: ../src/cad3d.c:660
1308#: ../src/diffpos.c:57
1309#: ../src/dump3d.c:49
1310#: ../src/extend.c:459
1311#: n:199
1312msgid "only load the sub-survey with this prefix"
1313msgstr "s prefixom sa natiahla iba časť merania"
1314
1315#. TRANSLATORS: --help output for aven --print option
1316#: ../src/aven.cc:68
1317#: n:119
1318msgid "print and exit (requires a 3d file)"
1319msgstr "vytlač a ukonči (vyžaduje 3D súbor)"
1320
1321#. TRANSLATORS: --help output for cavern --percentage option
1322#: ../src/cavern.c:125
1323#: n:161
1324msgid "display percentage progress"
1325msgstr "zobraz postup v percento"
1326
1327#. TRANSLATORS: --help output for cavern --output option
1328#: ../src/cavern.c:127
1329#: n:162
1330msgid "set location for output files"
1331msgstr "urči miesto pre uloženie výstupných súborov"
1332
1333#. TRANSLATORS: --help output for cavern --quiet option
1334#: ../src/cavern.c:129
1335#: n:163
1336msgid "only show brief summary (-qq for errors only)"
1337msgstr "zobraz iba krátku správu (-qq iba pre chyby)"
1338
1339#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1340#: ../src/cavern.c:131
1341#: n:164
1342msgid "do not create .err file"
1343msgstr "nedá sa vytvoriť súbor s chybami"
1344
1345#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1346#: ../src/cavern.c:133
1347#: n:165
1348msgid "turn warnings into errors"
1349msgstr "zmena varovania na chyby"
1350
1351#. TRANSLATORS: --help output for cavern --log option
1352#: ../src/cavern.c:135
1353#: n:170
1354msgid "log output to .log file"
1355msgstr "zápis výstupu do súboru .log"
1356
1357#. TRANSLATORS: --help output for cavern --3d-version option
1358#: ../src/cavern.c:137
1359#: n:171
1360msgid "specify the 3d file format version to output"
1361msgstr "ktorú verziu 3d súboru použiť pre výstup"
1362
1363#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1364#. meaningless to say your tape is marked in "0 feet" (but you might
1365#. measure distance by counting knots on a diving line, and tie them
1366#. every "2 feet").
1367#: ../src/commands.c:1451
1368#: n:200
1369msgid "*UNITS factor must be non-zero"
1370msgstr "*UNITS faktor musí byť nenulový"
1371
1372#: ../src/mainfrm.cc:1470
1373#: n:202
1374#, c-format
1375msgid "No survey data in 3d file “%s”"
1376msgstr "V 3d súbore “%s” nie sú údaje"
1377
1378#: ../src/gfxcore.cc:708
1379#: n:203
1380msgid "Facing"
1381msgstr "Smer"
1382
1383#. TRANSLATORS: for the title of the About box
1384#: ../src/aboutdlg.cc:63
1385#: n:205
1386#, c-format
1387msgid "About %s"
1388msgstr "O %s"
1389
1390#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1391#. - it should be translated to the terminology that cavers using the
1392#. language would use.
1393#.
1394#. File->Open dialog:
1395#: ../src/mainfrm.cc:1976
1396#: n:206
1397msgid "Select a survey file to view"
1398msgstr "Vyber súbor s meraním (survey)"
1399
1400#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
1401#. file extension, so neither should be translated.
1402#: ../src/mainfrm.cc:1953
1403#: n:207
1404msgid "Survex 3d files"
1405msgstr "3D súbory Survex"
1406
1407#: ../src/mainfrm.cc:1968
1408#: ../src/mainfrm.cc:2419
1409#: ../src/printwx.cc:667
1410#: n:208
1411msgid "All files"
1412msgstr "Všetky súbory"
1413
1414#. TRANSLATORS: Here "survey" is a "cave map" rather than
1415#. list of questions - it should be translated to the
1416#. terminology that cavers using the language would use.
1417#: ../src/mainfrm.cc:1950
1418#: n:229
1419msgid "All survey files"
1420msgstr "Všetky súbory s meraním"
1421
1422#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
1423#. file extension, so neither should be translated.
1424#: ../src/mainfrm.cc:1956
1425#: n:329
1426msgid "Survex svx files"
1427msgstr "Súbory svx Survexu"
1428
1429#. TRANSLATORS: "Compass" as in Larry Fish’s cave
1430#. surveying package, so should not be translated
1431#: ../src/mainfrm.cc:1964
1432#: n:330
1433msgid "Compass DAT and MAK files"
1434msgstr "Súbory DAT a MAK pre Compass"
1435
1436#: ../src/printwx.cc:311
1437#: n:411
1438msgid "DXF files"
1439msgstr "Súbory DXF"
1440
1441#: ../src/printwx.cc:312
1442#: n:412
1443msgid "EPS files"
1444msgstr "Súbory EPS"
1445
1446#: ../src/printwx.cc:313
1447#: n:413
1448msgid "GPX files"
1449msgstr "Súbory GPX"
1450
1451#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
1452#. on a (usually large) sheet of paper using a pen mounted in a motorised
1453#. mechanism.
1454#: ../src/printwx.cc:317
1455#: n:414
1456msgid "HPGL for plotters"
1457msgstr "Súbory HPGL pre plotry"
1458
1459#: ../src/printwx.cc:319
1460#: n:444
1461msgid "KML files"
1462msgstr "Súbory KML"
1463
1464#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
1465#. so should not be translated:
1466#. http://www.fountainware.com/compass/
1467#. http://www.psc-cavers.org/carto/
1468#: ../src/printwx.cc:324
1469#: n:415
1470msgid "Compass PLT for use with Carto"
1471msgstr "Súbory Compass PLT pre použitie v prog. Carto"
1472
1473#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
1474#. translated: http://www.skencil.org/
1475#: ../src/printwx.cc:327
1476#: n:416
1477msgid "Skencil files"
1478msgstr "Súbory Skencil"
1479
1480#: ../src/printwx.cc:328
1481#: n:417
1482msgid "SVG files"
1483msgstr "Súbory SVG"
1484
1485#: ../src/printwx.cc:318
1486#: n:445
1487msgid "JSON files"
1488msgstr "Súbory JSON"
1489
1490#. TRANSLATORS: Log files from running cavern (extension .log)
1491#: ../src/cavernlog.cc:508
1492#: n:447
1493msgid "Log files"
1494msgstr ""
1495
1496#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1497#. - it should be translated to the terminology that cavers using the
1498#. language would use.
1499#.
1500#. This string is used in the about box (summarising the purpose of aven).
1501#: ../src/aboutdlg.cc:91
1502#: n:209
1503msgid "Survey visualisation tool"
1504msgstr "Vizualizácia polygónu"
1505
1506#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
1507#. some languages here:
1508#. http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
1509#: ../src/aboutdlg.cc:105
1510#: n:219
1511msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1512msgstr "Tento program je volný software; můžete jej šířit a modifikovat podle ustanovení Obecné veřejné licence GNU, vydávané Free Software Foundation; a to buď verze 2 této licence anebo (podle vašeho uvážení) kterékoli pozdější verze."
1513
1514#. TRANSLATORS: Part of 3dtopos --help
1515#: ../src/3dtopos.c:86
1516#: n:217
1517msgid "3D_FILE [POS_FILE]"
1518msgstr "3D_FILE [POS_FILE]"
1519
1520#. TRANSLATORS: Part of diffpos --help
1521#: ../src/diffpos.c:265
1522#: n:218
1523msgid "FILE1 FILE2 [THRESHOLD]"
1524msgstr "FILE1 FILE2 [THRESHOLD]"
1525
1526#. TRANSLATORS: Part of diffpos --help
1527#: ../src/diffpos.c:267
1528#: n:255
1529#, c-format
1530msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1531msgstr "FILE1 a FILE2 môžu byť súbory .pos alebo .3d\nTHRESHOLD je max. ignorovateľná zmena pozdĺž ktorejkoľvek osi v metroch (defaultne %s)"
1532
1533#. TRANSLATORS: Part of extend --help
1534#: ../src/extend.c:481
1535#: n:267
1536msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1537msgstr "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1538
1539#. TRANSLATORS: Part of sorterr --help
1540#: ../src/sorterr.c:127
1541#: n:268
1542msgid "ERR_FILE [HOW_MANY]"
1543msgstr "ERR_FILE [HOW_MANY]"
1544
1545#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1546#. - it should be translated to the terminology that cavers using the
1547#. language would use.
1548#.
1549#. Part of aven --help
1550#: ../src/aven.cc:115
1551#: ../src/aven.cc:139
1552#: n:269
1553msgid "[SURVEY_FILE]"
1554msgstr "[SURVEY_FILE]"
1555
1556#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
1557#. are surveys without date information.  Try to keep this fairly short.
1558#: ../src/gfxcore.cc:1052
1559#: n:221
1560msgid "Undated"
1561msgstr "Bez dátumu"
1562
1563#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1564#. which aren’t part of a loop and so have no error information. Try to keep
1565#. this fairly short.
1566#: ../src/gfxcore.cc:1077
1567#: n:290
1568msgid "Not in loop"
1569msgstr "Nie je súčasťou uzavretého ťahu"
1570
1571#. TRANSLATORS: error from:
1572#.
1573#. *data normal newline from to tape compass clino
1574#: ../src/commands.c:1290
1575#: n:222
1576msgid "NEWLINE can’t be the first reading"
1577msgstr "NEWLINE nemôže byť prvý údaj"
1578
1579#. TRANSLATORS: error from:
1580#.
1581#. *data normal from to tape compass clino newline
1582#: ../src/commands.c:1333
1583#: n:223
1584msgid "NEWLINE can’t be the last reading"
1585msgstr "NEWLINE nemôže byť posledný údaj"
1586
1587#. TRANSLATORS: Error given by something like:
1588#.
1589#. *data normal station tape compass clino
1590#.
1591#. ("station" signifies interleaved data).
1592#: ../src/commands.c:1356
1593#: n:224
1594msgid "Interleaved readings, but no NEWLINE"
1595msgstr "Vložené údaje, ale nie NEWLINE"
1596
1597#. TRANSLATORS: caused by e.g.
1598#.
1599#. *data diving station newline depth tape compass
1600#.
1601#. ("depth" needs to occur before "newline").
1602#: ../src/commands.c:1227
1603#: n:225
1604#, c-format
1605msgid "Reading “%s” must occur before NEWLINE"
1606msgstr "Údaj “%s” musí predchádzať NEWLINE"
1607
1608#. TRANSLATORS: e.g.
1609#.
1610#. *data normal from to tape newline compass clino
1611#: ../src/commands.c:1280
1612#: n:226
1613msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1614msgstr "NEWLINE môže byť zpracované iba pri STATION, DEPTH, a COUNT"
1615
1616#. TRANSLATORS: e.g.
1617#.
1618#. *calibrate tape compass 1 1
1619#: ../src/commands.c:1492
1620#: n:227
1621msgid "Can’t calibrate angular and length quantities together"
1622msgstr "Nie je možné nakalibrovať uhlovýé a dļžkové údaje naraz"
1623
1624#: ../src/commands.c:618
1625#: n:397
1626msgid "Bad *alias command"
1627msgstr ""
1628
1629#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1630#. currently)
1631#: ../src/log.cc:32
1632#: n:228
1633#, c-format
1634msgid "%s Error Log"
1635msgstr "%s záznam chýb"
1636
1637#. TRANSLATORS: The text on the action button in the "Export" settings
1638#. dialog
1639#: ../src/printwx.cc:626
1640#: n:230
1641msgid "&Export…"
1642msgstr "&Export…"
1643
1644#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
1645#. this group.  Tickable menu item which toggles auto rotation
1646#: ../src/mainfrm.cc:830
1647#: n:231
1648msgid "Au&to-Rotate\tSpace"
1649msgstr "&Autorotácia\tSpace"
1650
1651#: ../src/mainfrm.cc:832
1652#: n:232
1653msgid "Speed &Up"
1654msgstr "Z&rýchliť rotáciu"
1655
1656#: ../src/mainfrm.cc:833
1657#: n:233
1658msgid "Slow &Down"
1659msgstr "&Spomaliť rotáciu"
1660
1661#: ../src/mainfrm.cc:835
1662#: n:234
1663msgid "&Reverse Direction"
1664msgstr "&Otočiť rotáciu"
1665
1666#: ../src/mainfrm.cc:837
1667#: n:235
1668msgid "Step Once &Anticlockwise"
1669msgstr "Jeden krok proti s&meru otáčania hodín"
1670
1671#: ../src/mainfrm.cc:838
1672#: n:236
1673msgid "Step Once &Clockwise"
1674msgstr "Jeden krok po smere otáča&nia hodín"
1675
1676#. TRANSLATORS: View *looking* North
1677#: ../src/gfxcore.cc:3358
1678#: ../src/mainfrm.cc:841
1679#: n:240
1680msgid "View &North"
1681msgstr "Pohľad na &sever"
1682
1683#. TRANSLATORS: View *looking* East
1684#: ../src/gfxcore.cc:3360
1685#: ../src/mainfrm.cc:842
1686#: n:241
1687msgid "View &East"
1688msgstr "Pohľad na &východ"
1689
1690#. TRANSLATORS: View *looking* South
1691#: ../src/gfxcore.cc:3362
1692#: ../src/mainfrm.cc:843
1693#: n:242
1694msgid "View &South"
1695msgstr "Pohľad na &juh"
1696
1697#. TRANSLATORS: View *looking* West
1698#: ../src/gfxcore.cc:3364
1699#: ../src/mainfrm.cc:844
1700#: n:243
1701msgid "View &West"
1702msgstr "Pohľad na &západ"
1703
1704#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1705#. - it should be translated to the terminology that cavers using the
1706#. language would use.
1707#: ../src/mainfrm.cc:849
1708#: n:244
1709msgid "Shift Survey &Left"
1710msgstr "Posunúť do&lava"
1711
1712#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1713#. - it should be translated to the terminology that cavers using the
1714#. language would use.
1715#: ../src/mainfrm.cc:853
1716#: n:245
1717msgid "Shift Survey &Right"
1718msgstr "Posunúť dop&rava"
1719
1720#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1721#. - it should be translated to the terminology that cavers using the
1722#. language would use.
1723#: ../src/mainfrm.cc:857
1724#: n:246
1725msgid "Shift Survey &Up"
1726msgstr "Posunúť do&hora"
1727
1728#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1729#. - it should be translated to the terminology that cavers using the
1730#. language would use.
1731#: ../src/mainfrm.cc:861
1732#: n:247
1733msgid "Shift Survey &Down"
1734msgstr "Posunúť &dolu"
1735
1736#: ../src/gfxcore.cc:3381
1737#: ../src/mainfrm.cc:863
1738#: n:248
1739msgid "&Plan View"
1740msgstr "&Pôdorys"
1741
1742#: ../src/gfxcore.cc:3382
1743#: ../src/mainfrm.cc:864
1744#: n:249
1745msgid "Ele&vation"
1746msgstr "R&ez"
1747
1748#: ../src/mainfrm.cc:866
1749#: n:250
1750msgid "&Higher Viewpoint"
1751msgstr "Zväčšiť &náklon"
1752
1753#: ../src/mainfrm.cc:867
1754#: n:251
1755msgid "L&ower Viewpoint"
1756msgstr "Z&menšiť náklon"
1757
1758#: ../src/mainfrm.cc:870
1759#: n:252
1760msgid "&Zoom In\t]"
1761msgstr "Zväčš&iť\t]"
1762
1763#: ../src/mainfrm.cc:871
1764#: n:253
1765msgid "Zoo&m Out\t["
1766msgstr "Zmenši&t\t["
1767
1768#: ../src/mainfrm.cc:873
1769#: n:254
1770msgid "Restore De&fault View"
1771msgstr "&Obnovenie východzieho pohľadu"
1772
1773#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1774#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1775#. the "what to print/export" dialog.
1776#: ../src/printwx.cc:399
1777#: n:283
1778msgid "View"
1779msgstr "Pohľad na"
1780
1781#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1782#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1783#. "Elements" isn’t a good name for this but nothing better has yet come to
1784#. mind!
1785#: ../src/printwx.cc:404
1786#: n:256
1787msgid "Elements"
1788msgstr "Objekty"
1789
1790#: ../src/printwx.cc:410
1791#: n:410
1792msgid "Export format"
1793msgstr ""
1794
1795#: ../src/printwx.cc:459
1796#: ../src/printwx.cc:839
1797#: n:257
1798#, c-format
1799msgid "%d pages (%dx%d)"
1800msgstr "%d stránok (%dx%d)"
1801
1802#. TRANSLATORS: used in the scale drop down selector in the print
1803#. dialog the implicit meaning is "choose a suitable scale to fit
1804#. the plot on a single page", but we need something shorter
1805#: ../src/printwx.cc:441
1806#: ../src/printwx.cc:858
1807#: n:258
1808msgid "One page"
1809msgstr "Jednu stránku"
1810
1811#: ../src/mainfrm.cc:163
1812#: ../src/printwx.cc:472
1813#: n:259
1814msgid "Bearing"
1815msgstr "Azimut"
1816
1817#: ../src/printwx.cc:513
1818#: n:260
1819msgid "Station Names"
1820msgstr "Mená bodov"
1821
1822#: ../src/printwx.cc:509
1823#: n:261
1824msgid "Crosses"
1825msgstr "Krížiky"
1826
1827#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1828#. "survey stations".
1829#: ../src/printwx.cc:499
1830#: n:262
1831msgid "Underground Survey Legs"
1832msgstr "Zámery pod povrchom"
1833
1834#: ../src/printwx.cc:529
1835#: n:393
1836msgid "Cross-sections"
1837msgstr ""
1838
1839#: ../src/printwx.cc:534
1840#: n:394
1841msgid "Walls"
1842msgstr "Steny"
1843
1844#. TRANSLATORS: Label for checkbox which controls whether there's a
1845#. layer in the exported file (for formats such as DXF and SVG)
1846#. containing polygons for the inside of cave passages).
1847#: ../src/printwx.cc:541
1848#: n:395
1849msgid "Passages"
1850msgstr "Chodby"
1851
1852#: ../src/printwx.cc:545
1853#: n:421
1854msgid "Origin in centre"
1855msgstr ""
1856
1857#: ../src/printwx.cc:549
1858#: n:422
1859msgid "Full coordinates"
1860msgstr ""
1861
1862#. TRANSLATORS: Used in the print dialog:
1863#: ../src/printwx.cc:479
1864#: n:263
1865msgid "Tilt angle"
1866msgstr "Náklon"
1867
1868#. TRANSLATORS: used in the print dialog - controls drawing lines
1869#. around each page
1870#: ../src/printwx.cc:557
1871#: n:264
1872msgid "Page Borders"
1873msgstr "Rámček"
1874
1875#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
1876#. controls drawing the box at the lower left with survey name, view
1877#. angles, etc
1878#: ../src/printwx.cc:568
1879#: n:265
1880msgid "Legend"
1881msgstr "Popiska"
1882
1883#. TRANSLATORS: will be used in the print dialog - check this to print
1884#. blank pages (otherwise they’ll be skipped to save paper)
1885#: ../src/printwx.cc:563
1886#: n:266
1887msgid "Blank Pages"
1888msgstr "Prázdne stránky"
1889
1890#. TRANSLATORS: Items in the "View" menu:
1891#: ../src/mainfrm.cc:890
1892#: n:270
1893msgid "Station &Names\tCtrl+N"
1894msgstr "&Mená bodov\tCtrl+N"
1895
1896#. TRANSLATORS: Toggles drawing of 3D passages
1897#: ../src/mainfrm.cc:892
1898#: n:346
1899msgid "Passage &Tubes\tCtrl+T"
1900msgstr "Chodby &rúrovité\tCtrl+T"
1901
1902#: ../src/mainfrm.cc:893
1903#: n:271
1904msgid "&Crosses\tCtrl+X"
1905msgstr "&Krížiky\tCtrl+X"
1906
1907#: ../src/mainfrm.cc:894
1908#: n:297
1909msgid "&Grid\tCtrl+G"
1910msgstr "&Sieť\tCtrl+G"
1911
1912#: ../src/mainfrm.cc:895
1913#: n:318
1914msgid "&Bounding Box\tCtrl+B"
1915msgstr "&Ohraničenie\tCtrl+B"
1916
1917#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1918#. "survey stations".
1919#: ../src/mainfrm.cc:899
1920#: n:272
1921msgid "&Underground Survey Legs\tCtrl+L"
1922msgstr "Zámery &pod povrchom\tCtrl+L"
1923
1924#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1925#. "survey stations".
1926#: ../src/mainfrm.cc:902
1927#: n:291
1928msgid "&Surface Survey Legs\tCtrl+F"
1929msgstr "Zámery &na povrchu\tCtrl+F"
1930
1931#: ../src/mainfrm.cc:918
1932#: n:273
1933msgid "&Overlapping Names"
1934msgstr "Pr&ekrývajúce sa mená"
1935
1936#: ../src/gfxcore.cc:3419
1937#: ../src/mainfrm.cc:919
1938#: n:292
1939msgid "Colour by &Depth"
1940msgstr "Farba podľa &hļbky"
1941
1942#: ../src/gfxcore.cc:3420
1943#: ../src/mainfrm.cc:920
1944#: n:293
1945msgid "Colour by D&ate"
1946msgstr "Farna podľa &dátumu"
1947
1948#: ../src/gfxcore.cc:3421
1949#: ../src/mainfrm.cc:921
1950#: n:289
1951msgid "Colour by E&rror"
1952msgstr "Colour &by Error"
1953
1954#: ../src/gfxcore.cc:3422
1955#: ../src/mainfrm.cc:922
1956#: n:82
1957msgid "Colour by &Length"
1958msgstr ""
1959
1960#: ../src/mainfrm.cc:924
1961#: n:294
1962msgid "Highlight &Entrances"
1963msgstr "Zvýrazniť &vchody"
1964
1965#: ../src/mainfrm.cc:925
1966#: n:295
1967msgid "Highlight &Fixed Points"
1968msgstr "Zvýrazniť &fixné body"
1969
1970#: ../src/mainfrm.cc:926
1971#: n:296
1972msgid "Highlight E&xported Points"
1973msgstr "Zvýrazniť e&xportované body"
1974
1975#: ../src/printwx.cc:517
1976#: n:418
1977msgid "Entrances"
1978msgstr "Vchody"
1979
1980#: ../src/printwx.cc:521
1981#: n:419
1982msgid "Fixed Points"
1983msgstr "Fixné body"
1984
1985#: ../src/printwx.cc:525
1986#: n:420
1987msgid "Exported Stations"
1988msgstr "Exportované body"
1989
1990#: ../src/mainfrm.cc:931
1991#: n:237
1992msgid "&Perspective"
1993msgstr "Perspektív&a"
1994
1995#: ../src/mainfrm.cc:933
1996#: n:238
1997msgid "Textured &Walls"
1998msgstr "&Texturované steny"
1999
2000#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2001#. using that term instead if it gives a better translation which most
2002#. users will understand.
2003#: ../src/mainfrm.cc:937
2004#: n:239
2005msgid "Fade Distant Ob&jects"
2006msgstr "Hm&listý opar"
2007
2008#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2009#. "survey stations".
2010#: ../src/mainfrm.cc:940
2011#: n:298
2012msgid "Smoot&hed Survey Legs"
2013msgstr "V&yrovnané zámery"
2014
2015#: ../src/mainfrm.cc:946
2016#: ../src/mainfrm.cc:950
2017#: n:356
2018msgid "Full Screen &Mode\tF11"
2019msgstr "&Celoobrazovkový režim\tF11"
2020
2021#: ../src/mainfrm.cc:964
2022#: n:274
2023msgid "&Compass"
2024msgstr "&Kompas"
2025
2026#: ../src/mainfrm.cc:965
2027#: n:275
2028msgid "C&linometer"
2029msgstr "&Sklonomer"
2030
2031#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2032#. corresponds to which depth, date, survey closure error, etc.
2033#: ../src/mainfrm.cc:968
2034#: n:276
2035msgid "Colour &Key"
2036msgstr "Priradenie &Farieb"
2037
2038#: ../src/mainfrm.cc:969
2039#: n:277
2040msgid "&Scale Bar"
2041msgstr "&Merítko"
2042
2043#: ../src/mainfrm.cc:959
2044#: n:280
2045msgid "&Reverse Sense\tCtrl+R"
2046msgstr "Obrátený sme&r\tCtrl+R"
2047
2048#: ../src/mainfrm.cc:929
2049#: ../src/mainfrm.cc:961
2050#: n:281
2051msgid "&Cancel Measuring Line\tEscape"
2052msgstr "&Zrušit líniu meraní\tEscape"
2053
2054#: ../src/mainfrm.cc:970
2055#: n:299
2056msgid "&Indicators"
2057msgstr "Indiká&tory"
2058
2059#: ../src/z_getopt.c:697
2060#: ../src/z_getopt.c:709
2061#: n:300
2062#, c-format
2063msgid "%s: option “%s” is ambiguous\n"
2064msgstr "%s: možnosť “%s” je dvojznačná\n"
2065
2066#: ../src/z_getopt.c:1025
2067#: ../src/z_getopt.c:1036
2068#: n:301
2069#, c-format
2070msgid "%s: option “-W %s” is ambiguous\n"
2071msgstr "%s: možnosť “-W %s” je dvojznačná\n"
2072
2073#: ../src/z_getopt.c:753
2074#: ../src/z_getopt.c:757
2075#: n:302
2076#, c-format
2077msgid "%s: option “%c%s” doesn’t allow an argument\n"
2078msgstr "%s: možnosť “%c%s” neumožňuje argument\n"
2079
2080#: ../src/z_getopt.c:742
2081#: ../src/z_getopt.c:745
2082#: n:303
2083#, c-format
2084msgid "%s: option “--%s” doesn’t allow an argument\n"
2085msgstr "%s: možnosť “--%s” neumožňuje argument\n"
2086
2087#: ../src/z_getopt.c:1060
2088#: ../src/z_getopt.c:1071
2089#: n:304
2090#, c-format
2091msgid "%s: option “-W %s” doesn’t allow an argument\n"
2092msgstr "%s: možnosť “-W %s” neumožňuje argument\n"
2093
2094#: ../src/z_getopt.c:792
2095#: ../src/z_getopt.c:804
2096#: ../src/z_getopt.c:1091
2097#: ../src/z_getopt.c:1103
2098#: n:305
2099#, c-format
2100msgid "%s: option “%s” requires an argument\n"
2101msgstr "%s: možnosť “%s” vyžaduje argument\n"
2102
2103#: ../src/z_getopt.c:962
2104#: ../src/z_getopt.c:973
2105#: ../src/z_getopt.c:1156
2106#: ../src/z_getopt.c:1168
2107#: n:306
2108#, c-format
2109msgid "%s: option requires an argument -- %c\n"
2110msgstr "%s: možnosť vyžaduje argument -- %c\n"
2111
2112#: ../src/z_getopt.c:842
2113#: ../src/z_getopt.c:845
2114#: n:307
2115#, c-format
2116msgid "%s: unrecognized option “--%s”\n"
2117msgstr "%s: nerozpoznaná možnosť “--%s”\n"
2118
2119#: ../src/z_getopt.c:853
2120#: ../src/z_getopt.c:856
2121#: n:308
2122#, c-format
2123msgid "%s: unrecognized option “%c%s”\n"
2124msgstr "%s: nerozpoznaná možnosť “%c%s”\n"
2125
2126#: ../src/z_getopt.c:903
2127#: ../src/z_getopt.c:906
2128#: n:309
2129#, c-format
2130msgid "%s: illegal option -- %c\n"
2131msgstr "%s: nepovolená možnosť -- %c\n"
2132
2133#: ../src/z_getopt.c:912
2134#: ../src/z_getopt.c:915
2135#: n:310
2136#, c-format
2137msgid "%s: invalid option -- %c\n"
2138msgstr "%s: nesprávna možnosť -- %c\n"
2139
2140#: ../src/mainfrm.cc:876
2141#: n:311
2142msgid "&New Presentation"
2143msgstr "&Nová prezentácia"
2144
2145#: ../src/mainfrm.cc:877
2146#: n:312
2147msgid "&Open Presentation…"
2148msgstr "&Otvoriť prezentáciu…"
2149
2150#: ../src/mainfrm.cc:878
2151#: n:313
2152msgid "&Save Presentation"
2153msgstr "&Ulož prezentáciu"
2154
2155#: ../src/mainfrm.cc:879
2156#: n:314
2157msgid "Sa&ve Presentation As…"
2158msgstr "Ulož prezentáciu a&ko…"
2159
2160#. TRANSLATORS: "Mark" as in "Mark this position"
2161#: ../src/mainfrm.cc:882
2162#: n:315
2163msgid "&Mark"
2164msgstr "&Zvýrazni"
2165
2166#. TRANSLATORS: "Play" as in "Play back a recording"
2167#: ../src/mainfrm.cc:884
2168#: n:316
2169msgid "Pla&y"
2170msgstr "&Prehrať"
2171
2172#: ../src/mainfrm.cc:885
2173#: n:317
2174msgid "&Export as Movie…"
2175msgstr "&Vyexportuj ako film…"
2176
2177#: ../src/mainfrm.cc:2496
2178#: n:331
2179msgid "Export Movie"
2180msgstr "vygeneruj film"
2181
2182#: ../src/cavernlog.cc:511
2183#: ../src/mainfrm.cc:371
2184#: n:319
2185msgid "Select an output filename"
2186msgstr "Zvoliť meno výstupného súboru"
2187
2188#: ../src/mainfrm.cc:368
2189#: ../src/mainfrm.cc:2418
2190#: n:320
2191msgid "Aven presentations"
2192msgstr "Prezentácie programu Aven"
2193
2194#. TRANSLATORS: title of the save screenshot dialog
2195#: ../src/mainfrm.cc:2004
2196#: n:321
2197msgid "Save Screenshot"
2198msgstr "Uložiť otlačok obrazovky"
2199
2200#: ../src/mainfrm.cc:2413
2201#: ../src/mainfrm.cc:2416
2202#: n:322
2203msgid "Select a presentation to open"
2204msgstr "Vybrať prezentáciu pre otvorenie"
2205
2206#: ../src/mainfrm.cc:450
2207#: n:323
2208#, c-format
2209msgid "Error in format of presentation file “%s”"
2210msgstr "Chyba vo formáte prezentačného súboru “%s”"
2211
2212#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2213#. surveying package, so probably shouldn’t be translated
2214#: ../src/mainfrm.cc:1960
2215#: n:324
2216msgid "Compass PLT files"
2217msgstr "Súbory Compass PLT"
2218
2219#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2220#. package, so don’t translate it.
2221#: ../src/mainfrm.cc:1967
2222#: n:325
2223msgid "CMAP XYZ files"
2224msgstr "Súbory CMAP XYZ"
2225
2226#. TRANSLATORS: title of message box
2227#: ../src/mainfrm.cc:2067
2228#: ../src/mainfrm.cc:2390
2229#: ../src/mainfrm.cc:2407
2230#: n:326
2231msgid "Modified Presentation"
2232msgstr "Upravená prezentácia"
2233
2234#. TRANSLATORS: and the question in that box
2235#: ../src/mainfrm.cc:2065
2236#: ../src/mainfrm.cc:2389
2237#: ../src/mainfrm.cc:2406
2238#: n:327
2239msgid "The current presentation has been modified.  Abandon unsaved changes?"
2240msgstr "Prezentácia bola zmenená. Nechcete radšej uožiť zmeny?"
2241
2242#: ../src/mainfrm.cc:2707
2243#: ../src/mainfrm.cc:2718
2244#: n:328
2245msgid "No matches were found."
2246msgstr "Neúspešné hľadanie."
2247
2248#. TRANSLATORS: "Find stations" button tooltip
2249#: ../src/mainfrm.cc:1045
2250#: n:332
2251msgid "Find"
2252msgstr "Hľadať"
2253
2254#. TRANSLATORS: "Hide stations" button default tooltip
2255#: ../src/mainfrm.cc:1047
2256#: ../src/mainfrm.cc:2750
2257#: n:333
2258msgid "Hide"
2259msgstr "Schovať"
2260
2261#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2262#: ../src/mainfrm.cc:2711
2263#: n:334
2264#, c-format
2265msgid "Hide %d found stations"
2266msgstr "Skryť %d nájdených bodov"
2267
2268#: ../src/mainfrm.cc:251
2269#: ../src/mainfrm.cc:2155
2270#: ../src/mainfrm.cc:2236
2271#: ../src/mainfrm.cc:2288
2272#: n:335
2273msgid "Altitude"
2274msgstr "Nadmorská výška"
2275
2276#. TRANSLATORS: error if you try to drag multiple files to the aven
2277#. window
2278#: ../src/mainfrm.cc:732
2279#: n:336
2280msgid "You may only view one 3d file at a time."
2281msgstr "Môžete prehliadať iba jeden 3D súbor"
2282
2283#: ../src/mainfrm.cc:971
2284#: n:337
2285msgid "&Side Panel"
2286msgstr "&Postranný panel"
2287
2288#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2289#. Easting)
2290#: ../src/mainfrm.cc:2153
2291#: ../src/mainfrm.cc:2175
2292#: ../src/mainfrm.cc:2177
2293#: ../src/mainfrm.cc:2287
2294#: n:338
2295msgid "%.2f E, %.2f N"
2296msgstr "%.2f V, %.2f S"
2297
2298#. TRANSLATORS: Used in Aven:
2299#. From <stationname>
2300#. H: 123.45m V: 234.56m
2301#. Dist: 456.78m  Brg: 200
2302#: ../src/mainfrm.cc:2195
2303#: ../src/mainfrm.cc:2245
2304#: ../src/mainfrm.cc:2307
2305#: n:339
2306#, c-format
2307msgid "From %s"
2308msgstr "Od %s"
2309
2310#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2311#: ../src/mainfrm.cc:2320
2312#: n:340
2313#, c-format
2314msgid "H %.2f%s, V %.2f%s"
2315msgstr "H %.2f%s, V %.2f%s"
2316
2317#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2318#. in Compass bearing)
2319#: ../src/mainfrm.cc:2332
2320#: n:341
2321#, c-format
2322msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2323msgstr "%s: %s, Vzd %.2f%s, Azim %03d%s"
2324
2325#. TRANSLATORS: tickable menu item in View menu.
2326#.
2327#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
2328#: ../src/gfxcore.cc:3410
2329#: ../src/gfxcore.cc:3429
2330#: ../src/mainfrm.cc:973
2331#: n:342
2332msgid "&Metric"
2333msgstr "&Metricky"
2334
2335#. TRANSLATORS: tickable menu item in View menu.
2336#.
2337#. Degrees are the angular measurement where there are 360 in a full
2338#. circle.
2339#: ../src/gfxcore.cc:3372
2340#: ../src/gfxcore.cc:3390
2341#: ../src/mainfrm.cc:974
2342#: n:343
2343msgid "&Degrees"
2344msgstr "&Stupne"
2345
2346#. TRANSLATORS: tickable menu item in View menu.
2347#.
2348#. Show the tilt of the survey as a percentage gradient (100% = 45
2349#. degrees = 50 grad).
2350#: ../src/gfxcore.cc:3395
2351#: ../src/mainfrm.cc:975
2352#: n:430
2353#, fuzzy
2354msgid "&Percent"
2355msgstr "P&ercent"
2356
2357#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2358#. used e.g.  "5km".
2359#.
2360#. If there should be a space between the number and this, include
2361#. one in the translation.
2362#: ../src/gfxcore.cc:1169
2363#: ../src/printwx.cc:1138
2364#: n:423
2365msgid "km"
2366msgstr "km"
2367
2368#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2369#. e.g. "10m".
2370#.
2371#. If there should be a space between the number and this, include
2372#. one in the translation.
2373#: ../src/commands.c:305
2374#: ../src/gfxcore.cc:1022
2375#: ../src/gfxcore.cc:1088
2376#: ../src/gfxcore.cc:1176
2377#: ../src/mainfrm.cc:2144
2378#: ../src/mainfrm.cc:2211
2379#: ../src/mainfrm.cc:2231
2380#: ../src/mainfrm.cc:2280
2381#: ../src/mainfrm.cc:2311
2382#: ../src/printwx.cc:1140
2383#: n:424
2384msgid "m"
2385msgstr "m"
2386
2387#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2388#. used e.g.  "50cm".
2389#.
2390#. If there should be a space between the number and this, include
2391#. one in the translation.
2392#: ../src/gfxcore.cc:1184
2393#: ../src/printwx.cc:1143
2394#: n:425
2395msgid "cm"
2396msgstr "cm"
2397
2398#. TRANSLATORS: abbreviation for "miles" (unit of length,
2399#. plural), used e.g.  "2 miles".
2400#.
2401#. If there should be a space between the number and this,
2402#. include one in the translation.
2403#: ../src/gfxcore.cc:1197
2404#: n:426
2405msgid " miles"
2406msgstr ""
2407
2408#. TRANSLATORS: abbreviation for "mile" (unit of length,
2409#. singular), used e.g.  "1 mile".
2410#.
2411#. If there should be a space between the number and this,
2412#. include one in the translation.
2413#: ../src/gfxcore.cc:1204
2414#: n:427
2415msgid " mile"
2416msgstr ""
2417
2418#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2419#. as "10ft".
2420#.
2421#. If there should be a space between the number and this, include
2422#. one in the translation.
2423#: ../src/commands.c:306
2424#: ../src/gfxcore.cc:1022
2425#: ../src/gfxcore.cc:1091
2426#: ../src/gfxcore.cc:1212
2427#: ../src/mainfrm.cc:2149
2428#: ../src/mainfrm.cc:2214
2429#: ../src/mainfrm.cc:2234
2430#: ../src/mainfrm.cc:2285
2431#: ../src/mainfrm.cc:2316
2432#: n:428
2433msgid "ft"
2434msgstr "ft"
2435
2436#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2437#. e.g. as "6in".
2438#.
2439#. If there should be a space between the number and this, include
2440#. one in the translation.
2441#: ../src/gfxcore.cc:1220
2442#: n:429
2443msgid "in"
2444msgstr ""
2445
2446#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2447#: ../src/gfxcore.cc:3367
2448#: n:387
2449msgid "&Hide Compass"
2450msgstr "&skryť azimut"
2451
2452#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2453#: ../src/gfxcore.cc:3385
2454#: n:384
2455msgid "&Hide Clino"
2456msgstr "&skryť sklon"
2457
2458#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2459#: ../src/gfxcore.cc:3405
2460#: n:385
2461msgid "&Hide scale bar"
2462msgstr "&skryť mierku"
2463
2464#. TRANSLATORS: Menu item which turns off the colour key.
2465#. The "Colour Key" is the thing in aven showing which colour
2466#. corresponds to which depth, date, survey closure error, etc.
2467#: ../src/gfxcore.cc:3427
2468#: n:386
2469msgid "&Hide colour key"
2470msgstr "&skryť popis farieb"
2471
2472#. TRANSLATORS: degree symbol - probably should be translated to
2473#. itself.
2474#: ../src/commands.c:308
2475#: ../src/gfxcore.cc:697
2476#: ../src/gfxcore.cc:772
2477#: ../src/mainfrm.cc:2198
2478#: ../src/mainfrm.cc:2324
2479#: ../src/printwx.cc:89
2480#: n:344
2481msgid "°"
2482msgstr "°"
2483
2484#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2485#. circle).
2486#: ../src/commands.c:309
2487#: ../src/gfxcore.cc:702
2488#: ../src/gfxcore.cc:777
2489#: n:76
2490msgid "ᵍ"
2491msgstr "ᵍ"
2492
2493#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2494#. full circle).  Try to make this as short as sensibly possible.
2495#.
2496#. E.g. in Italian and Spanish we use "g.cent." rather than
2497#. "gradi quattrocentesimali"/"grados centesimales"
2498#: ../src/mainfrm.cc:2206
2499#: ../src/mainfrm.cc:2327
2500#: n:345
2501msgid "grad"
2502msgstr "grády"
2503
2504#. TRANSLATORS: symbol for percentage gradient (100% = 45
2505#. degrees = 50 grad).
2506#: ../src/commands.c:310
2507#: ../src/gfxcore.cc:763
2508#: ../src/gfxcore.cc:781
2509#: n:96
2510msgid "%"
2511msgstr "%"
2512
2513#. TRANSLATORS: infinity symbol - used for the percentage gradient on
2514#. vertical angles.
2515#: ../src/gfxcore.cc:757
2516#: n:431
2517msgid "∞"
2518msgstr "∞"
2519
2520#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2521#. in Compass bearing)
2522#: ../src/mainfrm.cc:2218
2523#: n:374
2524#, c-format
2525msgid "%s: H %.2f%s, Brg %03d%s"
2526msgstr "%s: H %.2f%s, Azim %03d%s"
2527
2528#. TRANSLATORS: "V" is short for "Vertical"
2529#: ../src/mainfrm.cc:2251
2530#: n:375
2531#, c-format
2532msgid "%s: V %.2f%s"
2533msgstr "%s: V %.2f%s"
2534
2535#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2536#. tree hierarchy of survey station names
2537#: ../src/mainfrm.cc:1095
2538#: n:376
2539msgid "Surveys"
2540msgstr "Merania"
2541
2542#: ../src/mainfrm.cc:1096
2543#: n:377
2544msgid "Presentation"
2545msgstr "Zobrazenie"
2546
2547#: ../src/mainfrm.cc:249
2548#: n:378
2549msgid "Easting"
2550msgstr "východ"
2551
2552#: ../src/mainfrm.cc:250
2553#: n:379
2554msgid "Northing"
2555msgstr "sever"
2556
2557#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
2558#. accelerator key.
2559#.
2560#. The string "\t" separates the menu text and any accelerator key.
2561#.
2562#. "File" menu.  The accelerators must be different within this group.
2563#. c.f. 201, 380, 381.
2564#: ../src/mainfrm.cc:801
2565#: n:220
2566msgid "&Open…\tCtrl+O"
2567msgstr "&Otvoriť…\tCtrl+O"
2568
2569#: ../src/mainfrm.cc:802
2570#: n:144
2571msgid "Show &Log"
2572msgstr "Zobraziť &záznam"
2573
2574#: ../src/mainfrm.cc:805
2575#: n:380
2576msgid "&Print…\tCtrl+P"
2577msgstr "&Tlačiť…\tCtrl+P"
2578
2579#: ../src/mainfrm.cc:806
2580#: n:381
2581msgid "P&age Setup…"
2582msgstr "&Nastavení tisku…"
2583
2584#. TRANSLATORS: In the "File" menu
2585#: ../src/mainfrm.cc:809
2586#: n:201
2587msgid "&Screenshot…"
2588msgstr "Otlačok o&brazovky…"
2589
2590#: ../src/mainfrm.cc:810
2591#: n:382
2592msgid "&Export as…"
2593msgstr "&Export ako…"
2594
2595#. TRANSLATORS: Title of file dialog to choose name and type of exported
2596#. file.
2597#: ../src/printwx.cc:673
2598#: n:401
2599msgid "Export as:"
2600msgstr "Exportuj ako:"
2601
2602#. TRANSLATORS: Title of the export
2603#. dialog
2604#: ../src/printwx.cc:346
2605#: n:383
2606msgid "Export"
2607msgstr "Export"
2608
2609#. TRANSLATORS: for about box:
2610#: ../src/aboutdlg.cc:142
2611#: n:390
2612msgid "System Information:"
2613msgstr "Informácie o systéme:"
2614
2615#. TRANSLATORS: Title of the print preview dialog
2616#: ../src/printwx.cc:710
2617#: n:398
2618msgid "Print Preview"
2619msgstr "Náhľad tlače"
2620
2621#. TRANSLATORS: Title of the print
2622#. dialog
2623#: ../src/printwx.cc:343
2624#: n:399
2625msgid "Print"
2626msgstr "Tlačiť"
2627
2628#: ../src/printwx.cc:621
2629#: n:400
2630msgid "&Print…"
2631msgstr "&Tlačiť…"
2632
2633#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2634#. "survey stations".
2635#: ../src/printwx.cc:505
2636#: n:403
2637msgid "Sur&face Survey Legs"
2638msgstr "Zámery &na povrchu"
2639
2640#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2641#: ../src/mainfrm.cc:136
2642#: n:404
2643msgid "Edit Waypoint"
2644msgstr "Zmeniť miesto pohľadu"
2645
2646#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2647#. in a presentation.
2648#: ../src/mainfrm.cc:175
2649#: n:278
2650msgid " (unused in perspective view)"
2651msgstr " (nepoužíva sa v perspektívnom zobrazení)"
2652
2653#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2654#. presentation.
2655#: ../src/mainfrm.cc:182
2656#: n:279
2657msgid "Time: "
2658msgstr "Čas: "
2659
2660#. TRANSLATORS: units+info after time field in dialog to edit a
2661#. waypoint in a presentation.
2662#: ../src/mainfrm.cc:186
2663#: n:282
2664msgid " secs (0 = auto; *6 = 6 times auto)"
2665msgstr " sekundy (0 = auto; *6 = 6 krát auto)"
2666
2667#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2668#. perhaps by "Survex" or other things in future).
2669#: ../src/aven.cc:230
2670#: n:405
2671#, c-format
2672msgid "This version of %s requires OpenGL to work, but it isn’t available."
2673msgstr "Verzia %s vyžaduje funkčné OpenGL, ale to nie je dostupné."
2674
2675#: ../src/readval.c:341
2676#: n:392
2677msgid "Separator in survey name"
2678msgstr ""
2679
2680#. TRANSLATORS: Used in place of the station name when talking about an
2681#. anonymous station.
2682#: ../src/labelinfo.h:82
2683#: n:56
2684msgid "anonymous station"
2685msgstr ""
2686
2687#: ../src/readval.c:124
2688#: ../src/readval.c:139
2689#: ../src/readval.c:156
2690#: n:3
2691msgid "Can't have a leg between two anonymous stations"
2692msgstr ""
2693
2694#: ../src/mainfrm.cc:915
2695#: n:406
2696#, fuzzy
2697msgid "Spla&y Legs"
2698msgstr "Splay Legs (&z)"
2699
2700#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
2701#. splay legs are not shown.
2702#: ../src/mainfrm.cc:907
2703#: n:407
2704msgid "&Hide"
2705msgstr "&Skryť"
2706
2707#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
2708#. aven will show splay legs with less bright colours (rather than the
2709#. same as other legs "Show" or not shown "Hide").
2710#: ../src/mainfrm.cc:911
2711#: n:408
2712msgid "&Fade"
2713msgstr ""
2714
2715#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
2716#. splay legs are shown the same as other legs.
2717#: ../src/mainfrm.cc:914
2718#: n:409
2719msgid "&Show"
2720msgstr "&Zobraziť"
2721
2722#: ../src/extend.c:507
2723#: n:105
2724msgid "Reading in data - please wait…"
2725msgstr "Načítam údaje - prosím počkajte…"
2726
2727#. TRANSLATORS: for extend: the user specified breaking a loop or
2728#. changing extend direction at this station, but we didn’t find it in
2729#. the 3d file
2730#: ../src/extend.c:263
2731#: ../src/extend.c:281
2732#: ../src/extend.c:326
2733#: ../src/extend.c:368
2734#: ../src/extend.c:410
2735#: n:510
2736#, c-format
2737msgid "Failed to find station %s"
2738msgstr "Nepodarilo sa nájsť bod %s"
2739
2740#. TRANSLATORS: for extend: the user specified breaking a loop or
2741#. changing extend direction at this leg, but we didn’t find it in the
2742#. 3d file
2743#: ../src/extend.c:307
2744#: ../src/extend.c:349
2745#: ../src/extend.c:391
2746#: ../src/extend.c:433
2747#: n:511
2748#, c-format
2749msgid "Failed to find leg %s → %s"
2750msgstr "Nepodarilo sa nájsť zámeru %s → %s"
2751
2752#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
2753#: ../src/extend.c:254
2754#: n:512
2755#, c-format
2756msgid "Starting from station %s"
2757msgstr "Začať od bodu %s"
2758
2759#. TRANSLATORS: for extend:
2760#: ../src/extend.c:274
2761#: n:513
2762#, c-format
2763msgid "Extending to the left from station %s"
2764msgstr "Rozvinutý rez vľavo od bodu %s"
2765
2766#. TRANSLATORS: for extend:
2767#: ../src/extend.c:319
2768#: n:514
2769#, c-format
2770msgid "Extending to the right from station %s"
2771msgstr "Rozvinutý rez vpravo od bodu %s"
2772
2773#. TRANSLATORS: for extend:
2774#: ../src/extend.c:294
2775#: n:515
2776#, c-format
2777msgid "Extending to the left from leg %s → %s"
2778msgstr "Rozvinutý rez vľavo od zámery %s → %s"
2779
2780#. TRANSLATORS: for extend:
2781#: ../src/extend.c:339
2782#: n:516
2783#, c-format
2784msgid "Extending to the right from leg %s → %s"
2785msgstr "Rozvinutý rez vpravo od zámery %s → %s"
2786
2787#. TRANSLATORS: for extend:
2788#: ../src/extend.c:403
2789#: n:517
2790#, c-format
2791msgid "Breaking survey loop at station %s"
2792msgstr "Prerušený okruh na bode %s"
2793
2794#. TRANSLATORS: for extend:
2795#: ../src/extend.c:423
2796#: n:518
2797#, c-format
2798msgid "Breaking survey loop at leg %s → %s"
2799msgstr "Prerušený okruh v zámere %s → %s"
2800
2801#. TRANSLATORS: for extend:
2802#: ../src/extend.c:361
2803#: n:519
2804#, c-format
2805msgid "Swapping extend direction from station %s"
2806msgstr "Zrkadlový smer rozvinutého rezu od bodu %s"
2807
2808#. TRANSLATORS: for extend:
2809#: ../src/extend.c:381
2810#: n:520
2811#, c-format
2812msgid "Swapping extend direction from leg %s → %s"
2813msgstr "Zrkadlový smer rozvinutého rezu od zámery %s → %s"
2814
2815#. TRANSLATORS: for extend:
2816#: ../src/extend.c:551
2817#: n:521
2818#, c-format
2819msgid "Applying specfile: “%s”"
2820msgstr "Použiť nastavenie zo súboru: “%s”"
2821
2822#. TRANSLATORS: for extend:
2823#. Used to tell the user that a file is being written - %s is the filename
2824#: ../src/extend.c:614
2825#: n:522
2826#, c-format
2827msgid "Writing %s…"
2828msgstr "Zapisuje sa súbor %s…"
2829
2830#. TRANSLATORS: --help output for sorterr --horizontal option
2831#: ../src/sorterr.c:53
2832#: n:179
2833msgid "sort by horizontal error factor"
2834msgstr "triedenie podľa horizontálnej chyby"
2835
2836#. TRANSLATORS: --help output for sorterr --vertical option
2837#: ../src/sorterr.c:55
2838#: n:180
2839msgid "sort by vertical error factor"
2840msgstr "triedenie podľa vertikálnej chyby"
2841
2842#. TRANSLATORS: --help output for sorterr --percentage option
2843#: ../src/sorterr.c:57
2844#: n:181
2845msgid "sort by percentage error"
2846msgstr "triedenie podľa perceptuálnej chyby"
2847
2848#. TRANSLATORS: --help output for sorterr --per-leg option
2849#: ../src/sorterr.c:59
2850#: n:182
2851msgid "sort by error per leg"
2852msgstr "triedenie podľa chyby ne zámeru"
2853
2854#. TRANSLATORS: --help output for sorterr --replace option
2855#: ../src/sorterr.c:61
2856#: n:183
2857msgid "replace .err file with resorted version"
2858msgstr "prepísať súbor .err novým triedením"
2859
2860#: ../src/sorterr.c:81
2861#: ../src/sorterr.c:98
2862#: ../src/sorterr.c:170
2863#: n:112
2864msgid "Couldn’t parse .err file"
2865msgstr "Chyba pri analýze .err súboru"
2866
2867#. TRANSLATORS: for diffpos:
2868#: ../src/diffpos.c:159
2869#: n:500
2870#, c-format
2871msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2872msgstr "Posun (%3.2f,%3.2f,%3.2f): %s"
2873
2874#. TRANSLATORS: for diffpos:
2875#: ../src/diffpos.c:196
2876#: n:501
2877#, c-format
2878msgid "Added: %s"
2879msgstr "Pridané: %s"
2880
2881#. TRANSLATORS: for diffpos:
2882#: ../src/diffpos.c:219
2883#: n:502
2884#, c-format
2885msgid "Deleted: %s"
2886msgstr "Zrušené: %s"
2887
2888#. TRANSLATORS: Program will exit shortly after printing this
2889#: ../src/message.c:227
2890#: n:90
2891msgid "Abnormal termination"
2892msgstr "Abnormálne ukončenie"
2893
2894#: ../src/message.c:228
2895#: n:91
2896msgid "Arithmetic error"
2897msgstr "Aritmetická chyba"
2898
2899#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
2900#. opcodes -- corrupted program?
2901#: ../src/message.c:231
2902#: n:92
2903msgid "Illegal instruction"
2904msgstr "Ilegálna inštrukcia"
2905
2906#: ../src/message.c:232
2907#: n:94
2908msgid "Bad memory access"
2909msgstr "Chyba prístupu do pamäte"
2910
2911#: ../src/message.c:233
2912#: n:97
2913msgid "Unknown signal received"
2914msgstr "Bol obdržaný neznámy signál"
2915
2916#. TRANSLATORS: e.g.
2917#.
2918#. *begin crawl
2919#. 1 2 9.45 234 -01
2920#. *end crawl
2921#. *begin crawl    # <- warning here
2922#. 2 3 7.67 223 -03
2923#. *end crawl
2924#.
2925#. If you're unsure what "deprecated" means, see:
2926#. http://en.wikipedia.org/wiki/Deprecation
2927#: ../src/commands.c:566
2928#: n:29
2929#, fuzzy
2930msgid "Reentering an existing survey is deprecated"
2931msgstr "Opakované vloženie existujúcej úrovne prefixu nie je povolené"
2932
2933#: ../src/commands.c:567
2934#: n:30
2935msgid "Originally entered here"
2936msgstr "Pôvodne vložené sem"
2937
2938#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
2939#. deprecated, so this error would be generated by:
2940#.
2941#. *equate \foo.7 1
2942#.
2943#. If you're unsure what "deprecated" means, see:
2944#. http://en.wikipedia.org/wiki/Deprecation
2945#: ../src/commands.c:492
2946#: ../src/readval.c:90
2947#: ../src/readval.c:94
2948#: n:25
2949msgid "ROOT is deprecated"
2950msgstr "ROOT bol zamietnutý"
2951
2952#. TRANSLATORS: --help output for dump3d --rewind option
2953#: ../src/dump3d.c:51
2954#: n:204
2955msgid "rewind file and read it a second time"
2956msgstr "znova načítať súbor od začiatku"
2957
2958#: ../src/dump3d.c:52
2959#: n:396
2960msgid "show survey date information (if present)"
2961msgstr ""
2962
2963#: ../src/findentrances.cc:100
2964#: ../src/gpx.cc:70
2965#: ../src/kml.cc:69
2966#: n:287
2967#, c-format
2968msgid "Failed to initialise input coordinate system “%s”"
2969msgstr "Zlyhal pokus o inicializáciu vstupného súradnicového systému “%s”"
2970
2971#: ../src/findentrances.cc:103
2972#: ../src/gpx.cc:75
2973#: ../src/kml.cc:74
2974#: n:288
2975#, c-format
2976msgid "Failed to initialise output coordinate system “%s”"
2977msgstr "Zlyhal pokus o inicializáciu výstupného súradnicového systému “%s”"
2978
2979#: ../src/findentrances.cc:158
2980#: n:388
2981msgid "-d PROJ_DATUM 3D_FILE"
2982msgstr "-d PROJ_DÁTUM 3D_SÚBOR"
2983
2984#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2985#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
2986#. what the input datum is.
2987#: ../src/findentrances.cc:149
2988#: n:389
2989msgid "input datum as string to pass to PROJ"
2990msgstr "Vložiť dátum ako text pre PROJ"
2991
2992#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2993#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
2994#. of the coordinate projection in use, the user must specify it here for
2995#. export formats which need to know it (e.g. GPX).
2996#: ../src/printwx.cc:582
2997#: n:440
2998msgid "Coordinate projection"
2999msgstr ""
3000
3001#: ../src/cad3d.c:661
3002#: n:100
3003msgid "do not generate station markers"
3004msgstr "negenerovať symboly bodov"
3005
3006#: ../src/cad3d.c:662
3007#: n:101
3008msgid "do not generate station labels"
3009msgstr "negenerovať popisky bodov"
3010
3011#: ../src/cad3d.c:663
3012#: n:102
3013msgid "do not generate survey legs"
3014msgstr "negenerovať zámery"
3015
3016#: ../src/cad3d.c:667
3017#: n:103
3018msgid "produce an elevation view"
3019msgstr "vytvoriť bočný pohľad"
3020
3021#: ../src/cad3d.c:664
3022#: n:148
3023#, c-format
3024msgid "generate grid (default %sm)"
3025msgstr "generovať sieť (defaultne %sm)"
3026
3027#: ../src/cad3d.c:665
3028#: n:149
3029#, c-format
3030msgid "station labels text height (default %s)"
3031msgstr "veľkosť textu pre popisky bodov (defaultne %sm)"
3032
3033#: ../src/cad3d.c:666
3034#: n:152
3035#, c-format
3036msgid "station marker size (default %s)"
3037msgstr "veľkosť symbolu bodu (defaultne %sm)"
3038
3039#: ../src/cad3d.c:668
3040#: n:155
3041#, c-format
3042msgid "factor to scale down by (default %s)"
3043msgstr "koeficient pre zmenšenie o (defaultne %sm)"
3044
3045#: ../src/cad3d.c:669
3046#: n:156
3047msgid "produce DXF output"
3048msgstr "vygenerovať formát DXF"
3049
3050#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
3051#. translated.
3052#: ../src/cad3d.c:672
3053#: n:158
3054msgid "produce Skencil output"
3055msgstr "vygenerovať formát Skencil"
3056
3057#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
3058#. so should not be translated.
3059#: ../src/cad3d.c:675
3060#: n:159
3061msgid "produce Compass PLT output for Carto"
3062msgstr "vygenerovať formát Compass PLT pre Carto"
3063
3064#: ../src/cad3d.c:676
3065#: n:160
3066msgid "produce SVG output"
3067msgstr "vygenerovať formát SVG"
3068
3069#, c-format
3070#~ msgid "Error in format of font file “%s”"
3071#~ msgstr "Chyba vo formáte fontu “%s”"
3072
3073#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
3074#. height values).
3075#~ msgid "Select a terrain file to view"
3076#~ msgstr "Vyber súbor s povrchom k zobrazeniu"
3077
3078#~ msgid "Terrain files"
3079#~ msgstr "Súbory s povrchom"
3080
3081#~ msgid "Open &Terrain…"
3082#~ msgstr "Otvoriť digitálny model &terénu…"
3083
3084#~ msgid "Solid Su&rface"
3085#~ msgstr "Neprie&hľadný povrch"
3086
3087#. TRANSLATORS: number of stations found matching search
3088#, c-format
3089#~ msgid "%d found"
3090#~ msgstr "%d nájdených"
3091
3092#: ../src/mainfrm.cc:954
3093#: n:347
3094#~ msgid "&Preferences…"
3095#~ msgstr "&Predvoľby…"
3096
3097#: n:348
3098#~ msgid "Draw passage walls"
3099#~ msgstr "Vykresliť steny priestorov"
3100
3101#: n:349
3102#~ msgid "Estimate LRUD readings based on heuristics"
3103#~ msgstr "Odhadnuté rozmery rezu na základe heuristiky"
3104
3105#: n:350
3106#~ msgid "Mark survey stations with crosses"
3107#~ msgstr "Vyznačiť meračské body krížikmi"
3108
3109#: n:351
3110#~ msgid "Highlight stations marked as entrances"
3111#~ msgstr "Zvýrazniť body označené ako vchody"
3112
3113#: n:352
3114#~ msgid "Highlight stations marked as fixed points"
3115#~ msgstr "Zvýrazniť body označené ako fixné body"
3116
3117#: n:353
3118#~ msgid "Highlight stations which are exported"
3119#~ msgstr "Zvýrazniť vyexportované body"
3120
3121#: n:354
3122#~ msgid "Mark survey stations with their names"
3123#~ msgstr "Doplniť body ich názvami"
3124
3125#: n:355
3126#~ msgid "Allow names to overlap on the display (faster)"
3127#~ msgstr "Povoliť prekrývanie názvov na obrazovke (rýchlejšie)"
3128
3129#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3130#. "survey stations".
3131#: n:357
3132#~ msgid "Display underground survey legs"
3133#~ msgstr "Zobraziť podzemné zámery"
3134
3135#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3136#. "survey stations".
3137#: n:358
3138#~ msgid "Display surface survey legs"
3139#~ msgstr "Zobraziť povrchové zámery"
3140
3141#: n:359
3142#~ msgid "Colour surface surveys by depth"
3143#~ msgstr "Zafarbiť povrchové zámery podľa výšky"
3144
3145#: n:360
3146#~ msgid "Draw surface legs with dashed lines"
3147#~ msgstr "Zobraziť povrchové zámery čiarkovano"
3148
3149#: n:361
3150#~ msgid "Draw a grid"
3151#~ msgstr "Zobraziť sieť"
3152
3153#: n:362
3154#~ msgid "metric units"
3155#~ msgstr "metrických jednotkách"
3156
3157#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
3158#. the USA (rather confusingly now that England has largely gone metric!)
3159#: n:363
3160#~ msgid "imperial units"
3161#~ msgstr "anglosaských jednotkách"
3162
3163#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
3164#. full circle.
3165#: n:364
3166#~ msgid "degrees (°)"
3167#~ msgstr "stupňoch (°)"
3168
3169#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
3170#. full circle.
3171#: n:365
3172#~ msgid "grads"
3173#~ msgstr "grádoch"
3174
3175#: n:366
3176#~ msgid "Display measurements in"
3177#~ msgstr "Zobraziť dļžky v"
3178
3179#: n:367
3180#~ msgid "Display angles in"
3181#~ msgstr "Zobraziť uhly v"
3182
3183#. TRANSLATORS: reverses the sense of the mouse controls
3184#: n:368
3185#~ msgid "Reverse the sense of the controls"
3186#~ msgstr "Obrátiť zmysel kontroly"
3187
3188#: n:369
3189#~ msgid "Display scale bar"
3190#~ msgstr "Zobraziť mierku"
3191
3192#: n:370
3193#~ msgid "Display depth bar"
3194#~ msgstr "Zobraziť hļbkovú škálu"
3195
3196#: n:371
3197#~ msgid "Display compass"
3198#~ msgstr "Zobraziť kompas"
3199
3200#: n:372
3201#~ msgid "Display clinometer"
3202#~ msgstr "Zobraziť sklon"
3203
3204#: n:373
3205#~ msgid "Display side panel"
3206#~ msgstr "Zobraziť bočný panel"
Note: See TracBrowser for help on using the repository browser.