source: git/lib/sk.po @ 31f1db0

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data
Last change on this file since 31f1db0 was 31f1db0, checked in by Olly Betts <olly@…>, 9 years ago

lib/survex.pot: Update line number references, and reorder messages
a bit so some which are lower priority to translate are later in the
file.
lib/: Merge .pot changes.

  • Property mode set to 100644
File size: 80.2 KB
RevLine 
[d86459c]1msgid ""
2msgstr ""
[483796d]3"Project-Id-Version: survex\n"
[d86459c]4"Report-Msgid-Bugs-To: olly@survex.com\n"
5"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
[dd83970]6"PO-Revision-Date: 2014-01-16 03:17:10 +0000\n"
[351937d]7"Last-Translator: Martin Sluka <martinsluka@mac.com>\n"
[d86459c]8"Language-Team: \n"
9"MIME-Version: 1.0\n"
10"Content-Type: text/plain; charset=utf-8\n"
11"Content-Transfer-Encoding: 8bit\n"
[e521b8e0]12"Language: sk\n"
[d86459c]13
[a665282]14#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
15#. was trying to allocate space for.
16#: ../src/message.c:85
[4a78370]17#: n:1
[d86459c]18#, c-format
[ee7511a]19msgid "Out of memory (couldn’t find %lu bytes)."
[d86459c]20msgstr "Nedostatok pamäte (chýba %lu bytov)."
21
[31f1db0]22#. TRANSLATORS: %s will be replaced by the filename that we were trying
23#. to read when we ran out of memory.
24#: ../src/img_hosted.c:34
25#: n:38
26#, fuzzy, c-format
27msgid "Out of memory trying to read file “%s”"
28msgstr "Nedostatočná pamäť: “%s”"
29
[a665282]30#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
31#. greater" if that gives a more natural translation.  It's
32#. technically not quite right when there are parallel active release
33#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
[a7d4233]34#. seems unlikely to confuse users.  "Survex" is the name of the
35#. software, so should not be translated.
36#.
37#. Here "survey" is a "cave map" rather than list of questions - it should be
38#. translated to the terminology that cavers using the language would use.
39#: ../src/commands.c:2022
[4a78370]40#: n:2
[d86459c]41#, c-format
42msgid "Survex version %s or greater required to process this survey data."
43msgstr "Pre spracovanie týchto dát je potrebná verzia Survexu %s alebo novšia."
44
45#. TRANSLATORS: Indicates a warning message e.g.:
46#. "spoon.svx:12: warning: *prefix is deprecated"
[a7d4233]47#: ../src/aven.cc:397
[31f1db0]48#: ../src/cavernlog.cc:242
49#: ../src/message.c:1255
[4a78370]50#: n:4
[d86459c]51msgid "warning"
52msgstr "varovanie"
53
[31f1db0]54#. TRANSLATORS: Indicates an error message e.g.:
55#. "spoon.svx:13:4: error: Field may not be omitted"
56#: ../src/cavernlog.cc:241
57#: ../src/message.c:1259
58#: n:93
59msgid "error"
60msgstr ""
61
[a665282]62#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
[a7d4233]63#. by the line number in that file.  Your translation should also contain
64#. %s:%u so that automatic parsing of error messages to determine the file
65#. and line number still works.
66#: ../src/datain.c:109
[4a78370]67#: n:5
68#, c-format
[715720f]69msgid "In file included from %s:%u:\n"
70msgstr "V súbore vloženom z %s:%u:\n"
[d86459c]71
[63a4d47]72#. TRANSLATORS: If you're unsure what "deprecated" means, see:
73#. http://en.wikipedia.org/wiki/Deprecation
[dfc141d]74#: ../src/commands.c:560
[4a78370]75#: n:6
[d86459c]76msgid "*prefix is deprecated - use *begin and *end instead"
77msgstr "*prefix bol odmietnutý - použijte namiesto toho *begin a *end"
78
[1c6c300]79#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a665282]80#: ../src/readval.c:206
[4a78370]81#: n:7
[d86459c]82#, c-format
[0804fbe]83msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
84msgstr "Znak “%c” v mene bodu nie je povolený (použijte *SET NAMES pre nastavenie povolených znakov)"
[d86459c]85
[a7d4233]86#: ../src/readval.c:387
[4a78370]87#: n:8
[d86459c]88msgid "Field may not be omitted"
89msgstr "Pole by nemalo zostať nevyplnené"
90
[a7d4233]91#: ../src/datain.c:1530
92#: ../src/datain.c:1816
93#: ../src/readval.c:389
94#: ../src/readval.c:430
95#: ../src/readval.c:460
[4a78370]96#: n:9
[d86459c]97#, c-format
[0804fbe]98msgid "Expecting numeric field, found “%s”"
99msgstr "predpokladá sa numerické pole, zistené “%s”"
[d86459c]100
[a7d4233]101#: ../src/commands.c:1620
[4a78370]102#: n:10
[d86459c]103#, c-format
[0804fbe]104msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
105msgstr "Zistené “%s”, predpokladá sa “PRESERVE”, “TOUPPER” alebo “TOLOWER”"
[d86459c]106
107#: ../src/debug.h:45
108#: ../src/debug.h:47
[f8c981b]109#: ../src/matrix.c:352
[a665282]110#: ../src/message.c:238
[4a78370]111#: n:11
[d86459c]112msgid "Bug in program detected! Please report this to the authors"
113msgstr "Zistená chyba programu! Prosíme, dajte to na vedomie autorom"
114
[a7d4233]115#: ../src/commands.c:2137
116#: ../src/extend.c:436
[4a78370]117#: n:12
[d86459c]118#, c-format
[0804fbe]119msgid "Unknown command “%s”"
120msgstr "Neznámy príkaz “%s”"
[d86459c]121
[1c6c300]122#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a7d4233]123#: ../src/netbits.c:449
[4a78370]124#: n:13
[d86459c]125#, c-format
[0804fbe]126msgid "Station “%s” equated to itself"
127msgstr "Bod “%s” je totožný sám so sebou"
[d86459c]128
[a665282]129#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
130#. survey stations.
[a7d4233]131#: ../src/datain.c:1051
[4a78370]132#: n:14
[d86459c]133msgid "Compass reading may not be omitted except on plumbed legs"
134msgstr "Nemalo by chýbať čítanie kompasu pokiaľ nejde o vertikálnu zámeru"
135
[a7d4233]136#: ../src/datain.c:284
137#: ../src/extend.c:441
[4a78370]138#: n:15
[d86459c]139msgid "End of line not blank"
140msgstr "Koniec riadku obsahuje nepatričný znak"
141
[a720caa]142#: ../src/cavern.c:393
[4a78370]143#: n:16
[d86459c]144#, c-format
145msgid "There were %d warning(s)."
146msgstr "Celkom bolo zaznamenaných %d varovaní."
147
[3d3fb6c]148#. TRANSLATORS: %s is replaced by the command we attempted to run.
[a665282]149#: ../src/cavernlog.cc:175
150#: ../src/cavernlog.cc:233
[4a78370]151#: n:17
[07e28a3]152#, c-format
[3d3fb6c]153msgid "Couldn’t run external command: “%s”"
[07e28a3]154msgstr "Vykonávanie príkazu “%s” zlyhalo"
[d86459c]155
156#: ../src/datain.c:80
157#: ../src/datain.c:88
158#: ../src/datain.c:95
[a7d4233]159#: ../src/datain.c:770
160#: ../src/extend.c:559
[a665282]161#: ../src/sorterr.c:80
162#: ../src/sorterr.c:97
163#: ../src/sorterr.c:240
[4a78370]164#: n:18
[d86459c]165msgid "Error reading file"
166msgstr "Chyba pri čítaní súboru"
167
[31f1db0]168#: ../src/message.c:1275
[4a78370]169#: n:19
[d86459c]170msgid "Too many errors - giving up"
171msgstr "Príliš mnoho chýb, koniec"
172
[63a4d47]173#. TRANSLATORS: If you're unsure what "deprecated" means, see:
174#. http://en.wikipedia.org/wiki/Deprecation
[a7d4233]175#: ../src/commands.c:1499
[4a78370]176#: n:20
[d86459c]177msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
178msgstr "*DEFAULT bol odmietnutý - použijte namiesto toho *CALIBRATE/DATA/SD/UNITS s argumentom DEFAULT"
179
[a665282]180#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
181#. (a weight on a string).  So the problem here is that the leg is
182#. vertical, so a compass reading has no meaning!
[a7d4233]183#: ../src/datain.c:1022
[4a78370]184#: n:21
[d86459c]185msgid "Compass reading given on plumbed leg"
186msgstr "Pri vertikálnej zámere bol zadaný azimut"
187
[dfc141d]188#: ../src/commands.c:648
[4a78370]189#: n:22
[d86459c]190msgid "END with no matching BEGIN in this file"
191msgstr "V tomto súbore sa vyskytlo END bez odpovadajúceho BEGIN"
192
[a7d4233]193#: ../src/datain.c:757
[4a78370]194#: n:23
[d86459c]195msgid "BEGIN with no matching END in this file"
196msgstr "V tomto súbore sa vyskytlo BEGIN bez odpovadajúceho END"
197
[63a4d47]198#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
199#. deprecated, so this error would be generated by:
200#.
[d86459c]201#. *equate \foo.7 1
[63a4d47]202#.
203#. If you're unsure what "deprecated" means, see:
204#. http://en.wikipedia.org/wiki/Deprecation
[11f3c9a]205#: ../src/commands.c:463
[9e5ad92]206#: ../src/readval.c:90
207#: ../src/readval.c:94
[4a78370]208#: n:25
[d86459c]209msgid "ROOT is deprecated"
210msgstr "ROOT bol zamietnutý"
211
[a665282]212#. TRANSLATORS: A station must be exported out of each level it is in, so
213#. this would give "Station “\outer.inner.1” not exported from survey
214#. “\outer”)":
215#.
[d86459c]216#. *equate entrance outer.inner.1
217#. *begin outer
218#. *begin inner
219#. *export 1
220#. 1 2 1.23 045 -6
221#. *end inner
222#. *end outer
[a7d4233]223#.
224#. Here "survey" is a "cave map" rather than list of questions - it should be
225#. translated to the terminology that cavers using the language would use.
226#: ../src/commands.c:964
227#: ../src/commands.c:966
[dfc141d]228#: ../src/listpos.c:104
[a7d4233]229#: ../src/readval.c:328
230#: ../src/readval.c:331
[4a78370]231#: n:26
[d86459c]232#, c-format
[0804fbe]233msgid "Station “%s” not exported from survey “%s”"
234msgstr "Bod “%s” nebol exportovaný z merania (survey) “%s”"
[d86459c]235
[a665282]236#. TRANSLATORS: This error occurs if there's an attempt to
237#. export a station from a survey which doesn't actually exist.
[a7d4233]238#.
239#. Here "survey" is a "cave map" rather than list of questions - it should be
240#. translated to the terminology that cavers using the language would use.
241#: ../src/listpos.c:112
[4a78370]242#: n:286
[571547c]243#, c-format
244msgid "Reference to station “%s” from non-existent survey “%s”"
[b1afaf6]245msgstr "Odkaz na bod “%s” z neexistujúceho survey “%s”"
[571547c]246
[a7d4233]247#. TRANSLATORS: Here "station" is a survey station, not a train station.
248#.
249#. Here "survey" is a "cave map" rather than list of questions - it should be
250#. translated to the terminology that cavers using the language would use.
251#: ../src/readval.c:302
[4a78370]252#: n:27
[d86459c]253#, c-format
[ee7511a]254msgid "“%s” can’t be both a station and a survey"
[0804fbe]255msgstr "“%s” nemôže byť súčasne bodom i meraním (survey)"
[d86459c]256
[a7d4233]257#. TRANSLATORS: Here "station" is a survey station, not a train station.
258#: ../src/extend.c:248
259#: ../src/extend.c:267
260#: ../src/extend.c:312
261#: ../src/extend.c:354
262#: ../src/extend.c:396
[9e5ad92]263#: ../src/readval.c:202
[4a78370]264#: n:28
[d86459c]265msgid "Expecting station name"
266msgstr "Predpokladá sa meno bodu"
267
[eb9a1e3]268#. TRANSLATORS: e.g.
269#.
270#. *begin crawl
271#. 1 2 9.45 234 -01
272#. *end crawl
273#. *begin crawl    # <- warning here
274#. 2 3 7.67 223 -03
275#. *end crawl
[63a4d47]276#.
277#. If you're unsure what "deprecated" means, see:
278#. http://en.wikipedia.org/wiki/Deprecation
[dfc141d]279#: ../src/commands.c:537
[4a78370]280#: n:29
[eb9a1e3]281#, fuzzy
282msgid "Reentering an existing survey is deprecated"
[d86459c]283msgstr "Opakované vloženie existujúcej úrovne prefixu nie je povolené"
284
[dfc141d]285#: ../src/commands.c:538
[4a78370]286#: n:30
[d86459c]287msgid "Originally entered here"
288msgstr "Pôvodne vložené sem"
289
[a7d4233]290#: ../src/commands.c:1948
[4a78370]291#: n:31
[d86459c]292#, c-format
[0804fbe]293msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
294msgstr "Zistené “%s”, predpokladané “EQUATES”, “EXPORTS” alebo “PLUMBS”"
[d86459c]295
[a7d4233]296#: ../src/commands.c:1955
[4a78370]297#: n:32
[d86459c]298#, c-format
[0804fbe]299msgid "Found “%s”, expecting “ON” or “OFF”"
300msgstr "Zistené “%s”, predpokladané “ON” alebo “OFF”"
[d86459c]301
[a665282]302#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
303#. translated.
[a7d4233]304#.
305#. Here "station" is a survey station, not a train station.
306#: ../src/commands.c:924
[4a78370]307#: n:33
[d86459c]308msgid "Only one station in EQUATE command"
309msgstr "V zozname EQUATE zistený iba jeden bod"
310
[11f3c9a]311#: ../src/commands.c:410
[4a78370]312#: n:34
[d86459c]313#, c-format
[0804fbe]314msgid "Unknown quantity “%s”"
315msgstr "Neznáma hodnota “%s”"
[d86459c]316
[11f3c9a]317#: ../src/commands.c:327
[4a78370]318#: n:35
[d86459c]319#, c-format
[0804fbe]320msgid "Unknown units “%s”"
321msgstr "Neznáma jednotka “%s”"
[d86459c]322
[a7d4233]323#: ../src/commands.c:1788
324#: ../src/commands.c:1863
[11f3c9a]325#: n:434
326msgid "Unknown coordinate system"
327msgstr ""
328
[a7d4233]329#: ../src/commands.c:1883
330#: ../src/commands.c:1908
[aa430ec]331#: n:443
332#, c-format
333msgid "Invalid coordinate system: %s"
334msgstr ""
335
[a7d4233]336#: ../src/commands.c:1870
337#: ../src/commands.c:1888
[11f3c9a]338#: n:435
339msgid "Coordinate system unsuitable for output"
340msgstr ""
341
[dfc141d]342#: ../src/commands.c:824
[11f3c9a]343#: n:436
344msgid "Failed to convert coordinates"
345msgstr ""
346
[dfc141d]347#: ../src/commands.c:829
[11f3c9a]348#: n:437
[29d1883]349msgid "The input projection is set but the output projection isn't"
[11f3c9a]350msgstr ""
351
[dfc141d]352#: ../src/commands.c:831
[11f3c9a]353#: n:438
[29d1883]354msgid "The output projection is set but the input projection isn't"
[11f3c9a]355msgstr ""
356
[29d1883]357#: ../src/commands.c:731
[11f3c9a]358#: n:439
359msgid "Coordinates can't be omitted when coordinate system has been specified"
360msgstr ""
361
[613028c]362#. TRANSLATORS: Used when a BEGIN command has no survey, but the
363#. END command does, e.g.:
[a665282]364#.
[d86459c]365#. *begin
366#. 1 2 10.00 178 -01
367#. *end entrance      <--[Message given here]
[dfc141d]368#: ../src/commands.c:670
[4a78370]369#: n:36
[613028c]370#, fuzzy
371msgid "Matching BEGIN command has no survey name"
[d86459c]372msgstr "Odpovedajúci tag BEGIN nemá prefix"
373
[a665282]374#. TRANSLATORS: Note: In English you talk about the *units* of a single
375#. measurement, but the correct term in other languages may be singular.
[11f3c9a]376#: ../src/commands.c:340
[4a78370]377#: n:37
[d86459c]378#, c-format
[0804fbe]379msgid "Invalid units “%s” for quantity"
380msgstr "Nesprávna jednotka “%s” pre hodnotu"
[d86459c]381
[11f3c9a]382#: ../src/commands.c:403
[4a78370]383#: n:39
[d86459c]384#, c-format
[0804fbe]385msgid "Unknown instrument “%s”"
386msgstr "Neznáma pomôcka “%s”"
[d86459c]387
[a665282]388#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
389#. translate
[a7d4233]390#: ../src/commands.c:1467
[4a78370]391#: n:40
[d86459c]392msgid "Scale factor must be 1.0 for DECLINATION"
393msgstr "Prepočítací faktor pre DECLINATION musí byť 1.0"
394
[a665282]395#. TRANSLATORS: If the scale factor for an instrument is zero, then any
396#. reading would be mapped to zero, which doesn't make sense.
[a7d4233]397#: ../src/commands.c:1473
[4a78370]398#: n:391
[63a4d47]399msgid "Scale factor must be non-zero"
400msgstr "Prepočítací faktor musí byť nenulový"
401
[a7d4233]402#: ../src/commands.c:1518
[4a78370]403#: n:41
[d86459c]404#, c-format
[0804fbe]405msgid "Unknown setting “%s”"
406msgstr "Neznáme nastavenie “%s”"
[d86459c]407
[11f3c9a]408#: ../src/commands.c:448
[4a78370]409#: n:42
[d86459c]410#, c-format
[0804fbe]411msgid "Unknown character class “%s”"
412msgstr "Neznáma trieda charakteru “%s”"
[d86459c]413
[a7d4233]414#: ../src/extend.c:605
[f8c981b]415#: ../src/netskel.c:90
[4a78370]416#: n:43
[d86459c]417msgid "No survey data"
418msgstr "Chýbajú údaje z merania"
419
420#: ../src/filename.c:52
[31f1db0]421#: ../src/img_hosted.c:35
[4a78370]422#: n:44
[d86459c]423#, c-format
[0804fbe]424msgid "Filename “%s” refers to directory"
425msgstr "Meno súboru “%s” odpovedá adresáru"
[d86459c]426
[9e5ad92]427#: ../src/netartic.c:384
[4a78370]428#: n:45
[d86459c]429msgid "Survey not all connected to fixed stations"
430msgstr "Časti merania nie sú pripojené na fixné body"
431
[29d1883]432#: ../src/commands.c:854
[a7d4233]433#: ../src/datain.c:682
[4a78370]434#: n:46
[d86459c]435msgid "Station already fixed or equated to a fixed point"
436msgstr "Bod je už fixný alebo je totožný s fixným bodom"
437
[11f3c9a]438#: ../src/cavern.c:298
[d86459c]439#: ../src/filename.c:55
[31f1db0]440#: ../src/img_hosted.c:36
[4a78370]441#: n:47
[d86459c]442#, c-format
[0804fbe]443msgid "Failed to open output file “%s”"
444msgstr "Zlyhal pokus o otvorenie výstupného súboru  “%s”"
[d86459c]445
[a7d4233]446#: ../src/commands.c:1573
[4a78370]447#: n:48
[d86459c]448msgid "Standard deviation must be positive"
449msgstr "Štandardná ochylka musí byť pozitívna"
450
[399807d8]451#. TRANSLATORS: as in: Usage: cavern …
[a665282]452#: ../src/cmdline.c:168
[4a78370]453#: n:49
[d86459c]454msgid "Usage"
455msgstr "Použitie"
456
[97d5744]457#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
458#. "survey stations".
459#.
460#. %s is replaced by the name of the station.
[a7d4233]461#: ../src/netbits.c:346
[4a78370]462#: n:50
[d86459c]463#, c-format
[0804fbe]464msgid "Survey leg with same station (“%s”) at both ends - typing error?"
465msgstr "Zámera s tým istým bodom (“%s”) na oboch koncoch - preklep?"
[d86459c]466
[a665282]467#. TRANSLATORS: Degrees are the angular measurement where there are
468#. 360 in a full circle.
[a7d4233]469#: ../src/datain.c:969
470#: ../src/datain.c:977
471#: ../src/datain.c:989
[4a78370]472#: n:51
[d86459c]473msgid "Clino reading over 90 degrees (absolute value)"
474msgstr "Absolútna hodnota sklonu väčšia ako 90 stupňov"
475
[a7d4233]476#: ../src/netbits.c:464
[4a78370]477#: n:52
[d86459c]478#, c-format
[0804fbe]479msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
480msgstr "Pokus o ztotožnenie dvoch rôznych fixných bodov “%s” a “%s”"
[d86459c]481
[a665282]482#. TRANSLATORS: "equal" as in:
483#.
484#. *fix a 1 2 3
485#. *fix b 1 2 3
486#. *equate a b
[a7d4233]487#: ../src/netbits.c:475
[4a78370]488#: n:53
[d86459c]489#, c-format
[0804fbe]490msgid "Equating two equal fixed points: “%s” and “%s”"
491msgstr "Ztotožnenie dvoch identických fixných bodov “%s” a “%s”"
[d86459c]492
493#. TRANSLATORS: " *fix a " gives this message:
[29d1883]494#: ../src/commands.c:741
[4a78370]495#: n:54
[d86459c]496msgid "FIX command with no coordinates - fixing at (0,0,0)"
497msgstr "Príkaz FIX bez odpovedajúcich súradníc - priradené (0,0,0)"
498
499#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
[29d1883]500#: ../src/commands.c:858
[a7d4233]501#: ../src/datain.c:684
[4a78370]502#: n:55
[d86459c]503msgid "Station already fixed at the same coordinates"
504msgstr "Bod už bol fixovaný s tými istými súradnicami"
505
[dfc141d]506#. TRANSLATORS: Emitted after second and subsequent "FIX command with
507#. no coordinates - fixing at (0,0,0)" warnings.
[29d1883]508#: ../src/commands.c:749
[dfc141d]509#: n:441
[29d1883]510#, fuzzy, c-format
[dfc141d]511msgid "Already had FIX command with no coordinates for station “%s”"
512msgstr "Viac ako jeden príkaz FIX bez súradníc: “%s”"
513
[a7d4233]514#: ../src/commands.c:1673
[29d1883]515#: n:442
516#, c-format
517msgid "Station “%s” fixed before CS command first used"
518msgstr ""
519
[a665282]520#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
521#. <SURVEY>, so this would generate this error:
522#.
[d86459c]523#. *begin fred
524#. 1 2 1.23 045 -6
525#. *export 2
526#. *end fred
[a7d4233]527#: ../src/commands.c:2151
[4a78370]528#: n:57
[0804fbe]529msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
530msgstr "*EXPORT musí bezprostredne nasledovať “*BEGIN <SURVEY>”"
[d86459c]531
[31f1db0]532#: ../src/readval.c:516
[4a78370]533#: n:58
[d86459c]534msgid "Invalid year (< 1900 or > 2078)"
535msgstr "Neplatný rok (< 1900 alebo > 2078)"
536
[a665282]537#. TRANSLATORS: Suspicious means something like 410 degrees or -20
538#. degrees
[a7d4233]539#: ../src/datain.c:867
540#: ../src/datain.c:876
[4a78370]541#: n:59
[d86459c]542msgid "Suspicious compass reading"
543msgstr "Podozrivé čítanie kompasu"
544
[a7d4233]545#: ../src/datain.c:1506
[4a78370]546#: n:60
[d86459c]547msgid "Negative tape reading"
548msgstr "Záporný dļžkový údaj"
549
[29d1883]550#: ../src/commands.c:736
[4a78370]551#: n:61
[d86459c]552msgid "Same station fixed twice with no coordinates"
553msgstr "Niektorý z bodov bol fixovaný dvakrát bez súradníc"
554
555#. TRANSLATORS: This means that the data fed in said this.
[a665282]556#.
557#. It could be a gross error (e.g. the decimal point is missing from the
558#. depth gauge reading) or it could just be due to random error on a near
559#. vertical leg
[a7d4233]560#: ../src/datain.c:1205
[4a78370]561#: n:62
[d86459c]562msgid "Tape reading is less than change in depth"
563msgstr "Dļžkový údaj je menší ako výškový rozdiel"
564
565#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
566#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
[a665282]567#. neither style nor reading is a keyword in the program This error
568#. complains about a depth gauge reading in normal style, for example
[a7d4233]569#: ../src/commands.c:1185
[4a78370]570#: n:63
[d86459c]571#, c-format
[0804fbe]572msgid "Reading “%s” not allowed in data style “%s”"
573msgstr "Hodnota “%s” nie je povolená v type dát “%s”"
[d86459c]574
575#. TRANSLATORS: i.e. not enough readings for the style.
[a7d4233]576#: ../src/commands.c:1370
[4a78370]577#: n:64
[d86459c]578#, c-format
[0804fbe]579msgid "Too few readings for data style “%s”"
580msgstr "Príliš málo údajov pre typ dát “%s”"
[d86459c]581
582#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
[a7d4233]583#: ../src/commands.c:1145
[4a78370]584#: n:65
[d86459c]585#, c-format
[0804fbe]586msgid "Data style “%s” unknown"
587msgstr "Neznámy typ dát “%s”"
[d86459c]588
[1c6c300]589#. TRANSLATORS: Here "station" is a survey station, not a train station.
590#.
[a665282]591#. Exporting a station twice gives this error:
592#.
[d86459c]593#. *begin example
594#. *export 1
595#. *export 1
596#. 1 2 1.24 045 -6
597#. *end example
[a7d4233]598#: ../src/commands.c:1015
[4a78370]599#: n:66
[d86459c]600#, c-format
[0804fbe]601msgid "Station “%s” already exported"
602msgstr "Bod “%s” už bol vyexportovaný"
[d86459c]603
[a665282]604#. TRANSLATORS: complains about a situation like trying to define
605#. two from stations per leg
[a7d4233]606#: ../src/commands.c:1211
[4a78370]607#: n:67
[d86459c]608#, c-format
[0804fbe]609msgid "Duplicate reading “%s”"
610msgstr "Duplicitná hodnota “%s”"
[d86459c]611
[29d1883]612#: ../src/commands.c:885
[4a78370]613#: n:68
[d86459c]614#, c-format
[0804fbe]615msgid "FLAG “%s” unknown"
616msgstr "FLAG “%s” je neznámy"
[d86459c]617
[a7d4233]618#: ../src/readval.c:474
[4a78370]619#: n:69
[d86459c]620msgid "Missing \""
621msgstr "Chýba \""
622
[1c6c300]623#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a7d4233]624#: ../src/listpos.c:122
[4a78370]625#: n:70
[ec3d624]626#, fuzzy, c-format
627msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
[0804fbe]628msgstr "Bod “%s” použitý iba raz s explicitným prefixom - preklep?"
[d86459c]629
[a665282]630#. TRANSLATORS: Here "station" is a survey station, not a train
631#. station.
632#: ../src/netartic.c:396
[4a78370]633#: n:71
[d86459c]634msgid "The following survey stations are not attached to a fixed point:"
635msgstr "Nasledujúci body nie sú pripojené na fixný bod"
636
[11f3c9a]637#: ../src/netskel.c:135
[4a78370]638#: n:72
[d86459c]639#, c-format
[ee7511a]640msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
[d86459c]641msgstr "Meranie (survey) nemá fixné body. Preto bude fixovaný %s so súradnicami (0,0,0)"
642
[1c6c300]643#. TRANSLATORS: fixed survey station that is not part of any survey
[11f3c9a]644#: ../src/netskel.c:958
[4a78370]645#: n:73
[d86459c]646#, c-format
[0804fbe]647msgid "Unused fixed point “%s”"
648msgstr "Nepoužitý fixný bod “%s”"
[d86459c]649
650#: ../src/matrix.c:123
[4a78370]651#: n:74
[d86459c]652msgid "Network solved by reduction - no simultaneous equations to solve."
653msgstr "Sieť vyriešená redukciou - nie je treba riešiť simultánne rovnice"
654
[f8c981b]655#: ../src/matrix.c:134
[4a78370]656#: n:75
[d86459c]657#, c-format
658msgid "Solving %d simultaneous equations"
659msgstr "Rieši sa %d simultánnych rovníc"
660
[a7d4233]661#: ../src/commands.c:1273
[4a78370]662#: n:77
[d86459c]663#, c-format
[0804fbe]664msgid "Reading “%s” duplicates previous reading(s)"
665msgstr "Údaj “%s” duplikuje predchádzajúci údaj/e"
[d86459c]666
[f8c981b]667#: ../src/matrix.c:132
[4a78370]668#: n:78
[d86459c]669msgid "Solving one equation"
670msgstr "Rieši sa jedna rovnica"
671
[a7d4233]672#: ../src/datain.c:940
673#: ../src/datain.c:1194
674#: ../src/datain.c:1387
[4a78370]675#: n:79
[d86459c]676msgid "Negative adjusted tape reading"
677msgstr "Záporná nastavená vzdialenosť"
678
[a7d4233]679#: ../src/commands.c:2059
680#: ../src/commands.c:2079
[4a78370]681#: n:80
[d86459c]682msgid "Date is in the future!"
683msgstr "Dátum je v budúcnosti!"
684
[a7d4233]685#: ../src/commands.c:2083
[4a78370]686#: n:81
[d86459c]687msgid "End of date range is before the start"
688msgstr "Posledný dátum je pred prvým"
689
[f8c981b]690#: ../src/avenprcore.cc:125
[4a78370]691#: n:82
[d86459c]692#, c-format
[0804fbe]693msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
694msgstr "Parameter “%s” v konfiguračnom súbore tlačiarne má nesprávnu hodnotu “%s”"
[d86459c]695
[a665282]696#. TRANSLATORS: e.g. the user specifies a passage cross-section at
697#. station "entrance.27", but there is no station "entrance.27" in
698#. the centre-line.
[11f3c9a]699#: ../src/netskel.c:1046
[4a78370]700#: n:83
[d86459c]701#, c-format
[0804fbe]702msgid "Cross section specified at non-existent station “%s”"
[351937d]703msgstr "Priečny rez definovaný na neexistujúcom bode “%s”"
[d86459c]704
[a665282]705#. TRANSLATORS: In data with backsights, the user has tried to give a
706#. plumb for the foresight and a clino reading for the backsight, or
707#. something similar.
[a7d4233]708#: ../src/datain.c:1006
709#: ../src/datain.c:1030
[4a78370]710#: n:84
[d86459c]711msgid "CLINO and BACKCLINO readings must be of the same type"
[351937d]712msgstr "Hodnoty CLINO a BACKCLINO musí byť toho istého typu"
[d86459c]713
[f8c981b]714#: ../src/avenprcore.cc:120
[4a78370]715#: n:85
[d86459c]716#, c-format
[0804fbe]717msgid "Parameter “%s” missing in printer configuration file"
718msgstr "Parameter “%s” v konfiguračnom súbore tlačiarne chýba"
[d86459c]719
[31f1db0]720#: ../src/readval.c:524
[4a78370]721#: n:86
[d86459c]722msgid "Invalid month"
723msgstr "Nesprávny mesiac"
724
725#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
[31f1db0]726#: ../src/readval.c:533
[4a78370]727#: n:87
[d86459c]728msgid "Invalid day of the month"
729msgstr "Tento deň v tomto mesiaci neexistuje"
730
[11f3c9a]731#: ../src/cavern.c:247
[4a78370]732#: n:88
[d86459c]733#, c-format
[1c6c300]734msgid "3d file format versions %d to %d supported"
[351937d]735msgstr "Sú podporované 3D formáty súborov %d až %d"
[1c6c300]736
[9e5ad92]737#: ../src/readval.c:200
[4a78370]738#: n:89
[d86459c]739msgid "Expecting survey name"
[351937d]740msgstr "Predpokladá sa názov survey"
[d86459c]741
742#. TRANSLATORS: Program will exit shortly after printing this
[a665282]743#: ../src/message.c:227
[4a78370]744#: n:90
[d86459c]745msgid "Abnormal termination"
746msgstr "Abnormálne ukončenie"
747
[a665282]748#: ../src/message.c:228
[4a78370]749#: n:91
[d86459c]750msgid "Arithmetic error"
751msgstr "Aritmetická chyba"
752
[a665282]753#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
754#. opcodes -- corrupted program?
755#: ../src/message.c:231
[4a78370]756#: n:92
[d86459c]757msgid "Illegal instruction"
758msgstr "Ilegálna inštrukcia"
759
[a7d4233]760#: ../src/datain.c:401
761#: ../src/extend.c:554
[98cf5b5]762#: ../src/img_hosted.c:30
[31f1db0]763#: ../src/mainfrm.cc:425
764#: ../src/printwx.cc:1545
[a665282]765#: ../src/sorterr.c:146
[98cf5b5]766#: n:24
[d86459c]767#, c-format
[ee7511a]768msgid "Couldn’t open file “%s”"
[0804fbe]769msgstr "Nie je možné otvoriť súbor “%s”"
[d86459c]770
[31f1db0]771#: ../src/printwx.cc:649
[4a78370]772#: n:402
[1c6c300]773#, c-format
[ee7511a]774msgid "Couldn’t write file “%s”"
[351937d]775msgstr "Súbor “%s” sa nedá zapísať"
[1c6c300]776
[a665282]777#: ../src/message.c:232
[4a78370]778#: n:94
[d86459c]779msgid "Bad memory access"
780msgstr "Chyba prístupu do pamäte"
781
[63a4d47]782#. TRANSLATORS: If you're unsure what "deprecated" means, see:
783#. http://en.wikipedia.org/wiki/Deprecation
[11f3c9a]784#: ../src/commands.c:467
[dfc141d]785#: ../src/commands.c:540
786#: ../src/commands.c:562
[a7d4233]787#: ../src/commands.c:1160
788#: ../src/commands.c:1501
[9e5ad92]789#: ../src/readval.c:96
[4a78370]790#: n:95
[d86459c]791msgid "Further uses of this deprecated feature will not be reported"
792msgstr "Ďalšie použitia zamietnutej fukcie nebudú zaznamenané"
793
[a665282]794#: ../src/message.c:233
[4a78370]795#: n:97
[d86459c]796msgid "Unknown signal received"
797msgstr "Bol obdržaný neznámy signál"
798
[a665282]799#. TRANSLATORS: Degrees are the angular measurement where there are
800#. 360 in a full circle.
[a7d4233]801#: ../src/datain.c:906
[4a78370]802#: n:98
[d86459c]803#, c-format
804msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
[351937d]805msgstr "Hodnoty COMPASS a BACKCOMPASS sa líši o %s stupňov"
[d86459c]806
[a665282]807#. TRANSLATORS: Degrees are the angular measurement where
808#. there are 360 in a full circle.
[a7d4233]809#: ../src/datain.c:1082
[4a78370]810#: n:99
[d86459c]811#, c-format
812msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
[351937d]813msgstr "Hodnoty CLINO a BACKCLINO sa líši o %s stupňov"
[d86459c]814
[a7d4233]815#: ../src/commands.c:1157
[4a78370]816#: n:104
[d86459c]817#, c-format
[0804fbe]818msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
819msgstr "“*data %s %c …” boly zamietnuté - použijte “*data %s …” namiesto toho"
[d86459c]820
[a7d4233]821#: ../src/extend.c:507
[4a78370]822#: n:105
[d86459c]823msgid "Reading in data - please wait…"
824msgstr "Načítam údaje - prosím počkajte…"
825
[a665282]826#. TRANSLATORS: Perhaps the user tried to load a different type of file as
827#. a Survex .3d file, or the .3d file was corrupted.
828#: ../src/3dtopos.c:157
829#: ../src/3dtopos.c:163
[a7d4233]830#: ../src/cad3d.c:909
831#: ../src/cad3d.c:920
[31f1db0]832#: ../src/img_hosted.c:39
[4a78370]833#: n:106
[d86459c]834#, c-format
[0804fbe]835msgid "Bad 3d image file “%s”"
836msgstr "Nesprávny 3D obrazový súbor  “%s”"
[d86459c]837
[a665282]838#. TRANSLATORS: This is the date format string used to timestamp .3d
839#. files internally.  Probably best to keep it the same for all
840#. translations.
[f8c981b]841#: ../src/img.c:43
[31f1db0]842#: ../src/mainfrm.cc:1444
[4a78370]843#: n:107
[d86459c]844#, c-format
845msgid "%a,%Y.%m.%d %H:%M:%S %Z"
846msgstr "%a,%Y.%m.%d %H:%M:%S %Z"
847
[a665282]848#. TRANSLATORS: used a processed survey with no processing date/time info
[31f1db0]849#: ../src/mainfrm.cc:1437
[4a78370]850#: n:108
[d86459c]851msgid "Date and time not available."
852msgstr "Dátum a čas nie sú dostupné"
853
[31f1db0]854#: ../src/img_hosted.c:40
[4a78370]855#: n:109
[d86459c]856#, c-format
[0804fbe]857msgid "Error reading from file “%s”"
858msgstr "Chyba pri čítaní zo súboru “%s”"
[d86459c]859
860#: ../src/filename.c:79
[31f1db0]861#: ../src/img_hosted.c:41
862#: ../src/mainfrm.cc:383
863#: ../src/mainfrm.cc:1956
[4a78370]864#: n:110
[d86459c]865#, c-format
[0804fbe]866msgid "Error writing to file “%s”"
867msgstr "Chyba pri zápise do súboru “%s”"
[d86459c]868
869#: ../src/filename.c:82
[4a78370]870#: n:111
[d86459c]871msgid "Error writing to file"
872msgstr "Chyba pri zápise do súboru"
873
[a665282]874#: ../src/sorterr.c:81
875#: ../src/sorterr.c:98
876#: ../src/sorterr.c:170
[4a78370]877#: n:112
[ee7511a]878msgid "Couldn’t parse .err file"
[d86459c]879msgstr "Chyba pri analýze .err súboru"
880
[a720caa]881#: ../src/cavern.c:388
[4a78370]882#: n:113
[8fa7902]883#, c-format
[d86459c]884msgid "There were %d warning(s) and %d error(s) - no output files produced."
885msgstr "Vyskytlo sa %d varovaní a %d chýb - nebol vytvorený výstupný súbor."
886
[31f1db0]887#: ../src/img_hosted.c:42
[4a78370]888#: n:114
[d86459c]889#, c-format
[0804fbe]890msgid "File “%s” has a newer format than this program can understand"
891msgstr "Súbor “%s” má novší formát, než je tento program schopný zpracovať"
[d86459c]892
[31f1db0]893#: ../src/printwx.cc:997
[4a78370]894#: n:115
[d86459c]895msgid "North"
896msgstr "Sever"
897
898#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
[31f1db0]899#: ../src/printwx.cc:1024
[4a78370]900#: n:116
[d86459c]901msgid "Elevation on"
902msgstr "Profil v smere"
903
[31f1db0]904#: ../src/printwx.cc:454
[4a78370]905#: n:117
[8a78ca1]906msgid "P&lan view"
907msgstr "&Pôdorys"
908
[31f1db0]909#: ../src/printwx.cc:456
[4a78370]910#: n:285
[8a78ca1]911msgid "&Elevation"
912msgstr "P&rofil"
[d86459c]913
[a720caa]914#: ../src/gfxcore.cc:802
[31f1db0]915#: ../src/mainfrm.cc:166
[4a78370]916#: n:118
[d86459c]917msgid "Elevation"
918msgstr "Profil"
919
[11f3c9a]920#. TRANSLATORS: Label used for "clino" in Aven when the view is
921#. from directly above.
[a720caa]922#: ../src/gfxcore.cc:714
[0fceb30]923#: n:432
924msgid "Plan"
925msgstr "Pôdorys"
926
[11f3c9a]927#. TRANSLATORS: Label used for "clino" in Aven when the view is
928#. from directly below.
[a720caa]929#: ../src/gfxcore.cc:724
[0fceb30]930#: n:433
931msgid "Kiwi Plan"
932msgstr ""
933
[11f3c9a]934#: ../src/cavern.c:352
[4a78370]935#: n:120
[d86459c]936msgid "Calculating statistics"
937msgstr "Počíta sa štatistika"
938
[31f1db0]939#: ../src/readval.c:489
[4a78370]940#: n:121
[d86459c]941msgid "Expecting string field"
942msgstr "Predpokladá sa textové pole"
943
[a665282]944#: ../src/cmdline.c:212
[4a78370]945#: n:122
[d86459c]946msgid "too few arguments"
947msgstr "Príliš málo argumentov"
948
[a665282]949#: ../src/cmdline.c:219
[4a78370]950#: n:123
[d86459c]951msgid "too many arguments"
952msgstr "Príliš mnoho argumentov"
953
[a665282]954#: ../src/cmdline.c:178
[399807d8]955#: ../src/cmdline.c:181
[a665282]956#: ../src/cmdline.c:185
[4a78370]957#: n:124
[d86459c]958msgid "FILE"
959msgstr "SÚBOR"
960
[a665282]961#. TRANSLATORS: In French, Eric chose to use the terminology used by
962#. toporobot: "sequence" for the English "traverse", which makes sense
963#. (although toporobot actually uses this term to mean something more
964#. specific).  Feel free to follow this lead if you can't think of a better
965#. term - these messages mostly indicate how processing is progressing.
[63a4d47]966#.
967#. A trailing traverse is a dead end back to a junction.
[11f3c9a]968#: ../src/netskel.c:177
[4a78370]969#: n:125
[d86459c]970msgid "Removing trailing traverses"
971msgstr "Odstránenie slepých odbočiek"
972
[a665282]973#. TRANSLATORS: In French, Eric chose to use the terminology used by
974#. toporobot: "sequence" for the English "traverse", which makes sense
975#. (although toporobot actually uses this term to mean something more
976#. specific).  Feel free to follow this lead if you can't think of a better
977#. term - these messages mostly indicate how processing is progressing.
[11f3c9a]978#: ../src/netskel.c:236
[4a78370]979#: n:126
[c20d521]980msgid "Concatenating traverses"
981msgstr "Pripojenie spojok"
[d86459c]982
[a665282]983#. TRANSLATORS: In French, Eric chose to use the terminology used by
984#. toporobot: "sequence" for the English "traverse", which makes sense
985#. (although toporobot actually uses this term to mean something more
986#. specific).  Feel free to follow this lead if you can't think of a better
987#. term - these messages mostly indicate how processing is progressing.
[11f3c9a]988#: ../src/netskel.c:434
[4a78370]989#: n:127
[c20d521]990msgid "Calculating traverses"
991msgstr "Výpočet spojok"
[d86459c]992
[a665282]993#. TRANSLATORS: In French, Eric chose to use the terminology used by
994#. toporobot: "sequence" for the English "traverse", which makes sense
995#. (although toporobot actually uses this term to mean something more
996#. specific).  Feel free to follow this lead if you can't think of a better
997#. term - these messages mostly indicate how processing is progressing.
[63a4d47]998#.
999#. A trailing traverse is a dead end back to a junction.
[11f3c9a]1000#: ../src/netskel.c:779
[4a78370]1001#: n:128
[d86459c]1002msgid "Calculating trailing traverses"
1003msgstr "Výpočet koncových spojok"
1004
1005#: ../src/network.c:82
[4a78370]1006#: n:129
[d86459c]1007msgid "Simplifying network"
1008msgstr "Zjednodušenie siete"
1009
1010#: ../src/network.c:540
[4a78370]1011#: n:130
[d86459c]1012msgid "Calculating network"
1013msgstr "Výpočet siete"
1014
[a7d4233]1015#: ../src/datain.c:1496
[4a78370]1016#: n:131
[d86459c]1017#, c-format
[0804fbe]1018msgid "Found “%s”, expecting “F” or “B”"
1019msgstr "Nájdené “%s”, očakávané “F” alebo “B”"
[d86459c]1020
[a720caa]1021#: ../src/cavern.c:449
[4a78370]1022#: n:132
[1c6c300]1023#, c-format
[d86459c]1024msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
1025msgstr "Celková dļžka zámer = %7.2fm (%7.2fm nastavené)"
1026
[a720caa]1027#: ../src/cavern.c:452
[4a78370]1028#: n:133
[1c6c300]1029#, c-format
[d86459c]1030msgid "Total plan length of survey legs = %7.2fm"
1031msgstr "Celková pôdorysná dļžka zámer %7.2fm"
1032
[a720caa]1033#: ../src/cavern.c:455
[4a78370]1034#: n:134
[1c6c300]1035#, c-format
[d86459c]1036msgid "Total vertical length of survey legs = %7.2fm"
1037msgstr "Celková vertikálna dļžka zámer %7.2fm"
1038
1039#. TRANSLATORS: numbers are altitudes of highest and lowest stations
[a720caa]1040#: ../src/cavern.c:462
[4a78370]1041#: n:135
[1c6c300]1042#, c-format
[aecd032]1043msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1044msgstr "Vertikálny rozsah = %4.2fm (od %s v %4.2fm do %s v %4.2fm)"
[d86459c]1045
[aecd032]1046#. TRANSLATORS: c.f. previous message
[a720caa]1047#: ../src/cavern.c:464
[4a78370]1048#: n:136
[1c6c300]1049#, c-format
[aecd032]1050msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1051msgstr "Rozsah sever-juh = %4.2fm (od %s od %4.2fm do %s do %4.2fm)"
[d86459c]1052
[aecd032]1053#. TRANSLATORS: c.f. previous two messages
[a720caa]1054#: ../src/cavern.c:466
[4a78370]1055#: n:137
[1c6c300]1056#, c-format
[aecd032]1057msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1058msgstr "Rozsah východ-západ = %4.2fm (od %s od %4.2fm do %s do %4.2fm)"
[d86459c]1059
[a720caa]1060#: ../src/cavern.c:434
[4a78370]1061#: n:138
[d86459c]1062msgid "There is 1 loop."
1063msgstr "Jeden uzavretý polygón."
1064
[a720caa]1065#: ../src/cavern.c:436
[4a78370]1066#: n:139
[d86459c]1067#, c-format
1068msgid "There are %ld loops."
1069msgstr "%ld uzavretých polygónov."
1070
[11f3c9a]1071#: ../src/cavern.c:374
[4a78370]1072#: n:140
[1c6c300]1073#, c-format
[d86459c]1074msgid "CPU time used %5.2fs"
1075msgstr "Využitý čas CPU %5.2fs"
1076
[11f3c9a]1077#: ../src/cavern.c:377
[4a78370]1078#: n:141
[1c6c300]1079#, c-format
[d86459c]1080msgid "Time used %5.2fs"
1081msgstr "Celkový čas %5.2fs"
1082
[11f3c9a]1083#: ../src/cavern.c:379
[4a78370]1084#: n:142
[d86459c]1085msgid "Time used unavailable"
1086msgstr "Celkový čas - nedostupný"
1087
[11f3c9a]1088#: ../src/cavern.c:382
[4a78370]1089#: n:143
[1c6c300]1090#, c-format
[d86459c]1091msgid "Time used %5.2fs (%5.2fs CPU time)"
1092msgstr "Celkový čas %5.2fs (%5.2fs času CPU)"
1093
[11f3c9a]1094#: ../src/netskel.c:744
[4a78370]1095#: n:145
[1c6c300]1096#, c-format
[034141d]1097msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1098msgstr "Pôvodná dļžka %6.2fm (%3d zámer), redukovaná %6.2fm (%5.2fm/zámeru). "
[d86459c]1099
[11f3c9a]1100#: ../src/netskel.c:747
[4a78370]1101#: n:146
[1c6c300]1102#, c-format
[034141d]1103msgid "Error %6.2f%%"
1104msgstr "Chyba %6.2f%%"
[d86459c]1105
[a665282]1106#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1107#. traverse has zero length, so error per metre is meaningless.
1108#.
1109#. There should be 4 spaces between "Error" and "N/A" so that it lines
1110#. up with the numbers in the message above.
[11f3c9a]1111#: ../src/netskel.c:754
[4a78370]1112#: n:147
[d86459c]1113msgid "Error    N/A"
1114msgstr "Chyba (nemá zmysel)"
1115
1116#. TRANSLATORS: description of --help option
[a665282]1117#: ../src/cmdline.c:138
[4a78370]1118#: n:150
[d86459c]1119msgid "display this help and exit"
1120msgstr "zobraziť túto nápovedu a skončiť"
1121
1122#. TRANSLATORS: description of --verbose option
[a665282]1123#: ../src/cmdline.c:141
[4a78370]1124#: n:151
[d86459c]1125msgid "output version information and exit"
1126msgstr "zobraziť informáciu o verzii a skončiť"
1127
[399807d8]1128#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
[a665282]1129#: ../src/cmdline.c:170
[4a78370]1130#: n:153
[d86459c]1131msgid "OPTION"
1132msgstr "OPTION"
1133
[31f1db0]1134#: ../src/mainfrm.cc:170
1135#: ../src/printwx.cc:402
1136#: ../src/printwx.cc:1069
1137#: ../src/printwx.cc:1118
[4a78370]1138#: n:154
[d86459c]1139msgid "Scale"
1140msgstr "Merítko"
1141
[a665282]1142#: ../src/cmdline.c:194
[4a78370]1143#: n:157
[d86459c]1144#, c-format
[0804fbe]1145msgid "Try “%s --help” for more information.\n"
1146msgstr "Viac informácií získate príkazom “%s --help”.\n"
[d86459c]1147
[f8c981b]1148#: ../src/avenprcore.cc:269
[4a78370]1149#: n:166
[d86459c]1150#, c-format
1151msgid "Page %d of %d"
1152msgstr "Stránka  %d z %d"
1153
[f8c981b]1154#: ../src/avenprcore.cc:272
[31f1db0]1155#: ../src/printwx.cc:1551
[4a78370]1156#: n:167
[d86459c]1157#, c-format
[0804fbe]1158msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1159msgstr "Meranie (survey) “%s”   Stránka %d (z %d)   Zpracované od stránky %s"
[d86459c]1160
[8011e0c]1161#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1162#. something like "123°".  The bearing is up the page.
[31f1db0]1163#: ../src/printwx.cc:1005
[4a78370]1164#: n:168
[399807d8]1165#, c-format
1166msgid "Plan view, %s up page"
[351937d]1167msgstr "Mapa, %s v hlavičke"
[8011e0c]1168
[a665282]1169#. TRANSLATORS: This is used on printouts of elevations, with %s
1170#. replaced by something like "123°".  The bearing is the direction
1171#. we’re looking.
[31f1db0]1172#: ../src/printwx.cc:1043
[4a78370]1173#: n:169
[399807d8]1174#, c-format
1175msgid "Elevation facing %s"
[351937d]1176msgstr "Bočný pohľad v smere %s"
[399807d8]1177
[a665282]1178#. TRANSLATORS: This is used on printouts of tilted elevations, with
1179#. the first %s replaced by something like "123°", and the second by
1180#. something like "-45°".  The bearing is the direction we’re
1181#. looking.
[31f1db0]1182#: ../src/printwx.cc:1052
[4a78370]1183#: n:284
[399807d8]1184#, c-format
1185msgid "Elevation facing %s, tilted %s"
[351937d]1186msgstr "Bočný pohľad v smere %s, pootočený o %s"
[399807d8]1187
1188#. TRANSLATORS: This is used on printouts of extended elevations.
[31f1db0]1189#: ../src/printwx.cc:1061
[4a78370]1190#: n:191
[399807d8]1191msgid "Extended elevation"
1192msgstr "Rozvinutý rez"
[d86459c]1193
[a720caa]1194#: ../src/cavern.c:420
[4a78370]1195#: n:172
[d86459c]1196msgid "Survey contains 1 survey station,"
1197msgstr "Meranie (survey) obsahuje jediný bod,"
1198
[a720caa]1199#: ../src/cavern.c:422
[4a78370]1200#: n:173
[d86459c]1201#, c-format
1202msgid "Survey contains %ld survey stations,"
1203msgstr "Meranie (survey) obsahuje %ld bodov,"
1204
[a720caa]1205#: ../src/cavern.c:426
[4a78370]1206#: n:174
[d86459c]1207msgid " joined by 1 leg."
1208msgstr " spojených 1 zámerou."
1209
[a720caa]1210#: ../src/cavern.c:428
[4a78370]1211#: n:175
[d86459c]1212#, c-format
1213msgid " joined by %ld legs."
1214msgstr " spojených %ld zámerami."
1215
1216#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
[a7d4233]1217#: ../src/listpos.c:185
[4a78370]1218#: n:176
[d86459c]1219msgid "node"
1220msgstr "uzol"
1221
1222#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
[a7d4233]1223#: ../src/listpos.c:187
[4a78370]1224#: n:177
[d86459c]1225msgid "nodes"
1226msgstr "uzly"
1227
[a665282]1228#. TRANSLATORS: "Connected component" in the graph theory sense - it
1229#. means there are %ld bits of survey with no connections between them.
1230#. This message is only used if there are more than 1.
[a720caa]1231#: ../src/cavern.c:445
[4a78370]1232#: n:178
[d86459c]1233#, c-format
1234msgid "Survey has %ld connected components."
1235msgstr "Meranie (survey) má %ld spojených častí."
1236
[a665282]1237#. TRANSLATORS: Label for button in aven’s cavern log window which
1238#. causes the survey data to be reprocessed.
[31f1db0]1239#: ../src/cavernlog.cc:453
1240#: ../src/cavernlog.cc:464
[4a78370]1241#: n:184
[1c6c300]1242msgid "Reprocess"
[351937d]1243msgstr "Spracuj dáta znova"
[d86459c]1244
[a665282]1245#: ../src/cmdline.c:242
1246#: ../src/cmdline.c:261
[4a78370]1247#: n:185
[d86459c]1248#, c-format
[0804fbe]1249msgid "numeric argument “%s” out of range"
1250msgstr "číselný argument “%s” mimo rozsah"
[d86459c]1251
[a665282]1252#: ../src/cmdline.c:244
[4a78370]1253#: n:186
[d86459c]1254#, c-format
[0804fbe]1255msgid "argument “%s” not an integer"
1256msgstr "argument “%s” nie je integer"
[d86459c]1257
[a665282]1258#: ../src/cmdline.c:263
[4a78370]1259#: n:187
[d86459c]1260#, c-format
[0804fbe]1261msgid "argument “%s” not a number"
1262msgstr "argument “%s” nie je číslo"
[d86459c]1263
[29d1883]1264#: ../src/commands.c:900
[4a78370]1265#: n:188
[0804fbe]1266msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1267msgstr "predpokladá sa “DUPLICATE”, “SPLAY”, alebo “SURFACE”"
[d86459c]1268
[29d1883]1269#: ../src/commands.c:903
[4a78370]1270#: n:189
[0804fbe]1271msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1272msgstr "Predpokladá sa “NOT”, “DUPLICATE”, “SPLAY”, alebo “SURFACE”"
[d86459c]1273
[4a78370]1274#: ../src/listpos.c:82
1275#: n:190
[d86459c]1276#, c-format
[0804fbe]1277msgid "Station “%s” referred to by *entrance or *export but never used"
1278msgstr "Bod “%s” sa uvádza ako *entrance alebo *export ale nebol použitý"
[d86459c]1279
[dfc141d]1280#: ../src/commands.c:646
[4a78370]1281#: n:192
[d86459c]1282msgid "No matching BEGIN"
1283msgstr "Chýba odpovedajúce BEGIN"
1284
[613028c]1285#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
1286#. same <survey> if it’s given at all
[dfc141d]1287#: ../src/commands.c:674
[4a78370]1288#: n:193
[613028c]1289#, fuzzy
1290msgid "Survey name doesn’t match BEGIN"
[d86459c]1291msgstr "Prefix tag neodpovedá BEGIN"
1292
[613028c]1293#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1294#. END command omits it, e.g.:
1295#.
1296#. *begin entrance
1297#. 1 2 10.00 178 -01
1298#. *end     <--[Message given here]
[dfc141d]1299#: ../src/commands.c:683
[4a78370]1300#: n:194
[613028c]1301#, fuzzy
1302msgid "Survey name omitted from END"
[d86459c]1303msgstr "Koncový prefix chýba v END"
1304
[a665282]1305#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the “,”s
1306#. (or at least the columns) are in the same place
1307#: ../src/3dtopos.c:112
[4a78370]1308#: n:195
[d86459c]1309msgid "( Easting, Northing, Altitude )"
1310msgstr "( východ,  sever,    výška    )"
1311
[1c6c300]1312#. TRANSLATORS: bpp is "Bits Per Pixel"
[a7d4233]1313#: ../src/aboutdlg.cc:188
[4a78370]1314#: n:196
[399807d8]1315#, c-format
[1c6c300]1316msgid "Display Depth: %d bpp"
[351937d]1317msgstr "Rozsah zobrazenia %d v bitoch na pixel)"
[1c6c300]1318
1319#. TRANSLATORS: appended to previous message if the display is colour
[a7d4233]1320#: ../src/aboutdlg.cc:190
[4a78370]1321#: n:197
[1c6c300]1322msgid " (colour)"
[b14d8e8]1323msgstr " (pre farbu)"
[1c6c300]1324
[31f1db0]1325#: ../src/readval.c:512
1326#: ../src/readval.c:522
1327#: ../src/readval.c:530
[4a78370]1328#: n:198
[d86459c]1329#, c-format
[0804fbe]1330msgid "Expecting date, found “%s”"
1331msgstr "Predpokladá sa čas, najdené “%s”"
[d86459c]1332
[a665282]1333#. TRANSLATORS: --help output for --survey option.
1334#.
[45af761]1335#. "this" has been added to English translation
[399807d8]1336#: ../src/3dtopos.c:50
[a665282]1337#: ../src/aven.cc:66
1338#: ../src/cad3d.c:660
[399807d8]1339#: ../src/diffpos.c:57
[f8c981b]1340#: ../src/dump3d.c:49
[a7d4233]1341#: ../src/extend.c:459
[4a78370]1342#: n:199
[45af761]1343msgid "only load the sub-survey with this prefix"
1344msgstr "s prefixom sa natiahla iba časť merania"
[d86459c]1345
[1c6c300]1346#. TRANSLATORS: --help output for aven --print option
[a665282]1347#: ../src/aven.cc:68
[4a78370]1348#: n:119
[1c6c300]1349msgid "print and exit (requires a 3d file)"
[351937d]1350msgstr "vytlač a ukonči (vyžaduje 3D súbor)"
[1c6c300]1351
1352#. TRANSLATORS: --help output for cavern --percentage option
[11f3c9a]1353#: ../src/cavern.c:125
[4a78370]1354#: n:161
[1c6c300]1355msgid "display percentage progress"
[dd83970]1356msgstr "zobraz postup v percento"
[1c6c300]1357
1358#. TRANSLATORS: --help output for cavern --output option
[11f3c9a]1359#: ../src/cavern.c:127
[4a78370]1360#: n:162
[1c6c300]1361msgid "set location for output files"
[351937d]1362msgstr "urči miesto pre uloženie výstupných súborov"
[1c6c300]1363
1364#. TRANSLATORS: --help output for cavern --quiet option
[11f3c9a]1365#: ../src/cavern.c:129
[4a78370]1366#: n:163
[1c6c300]1367msgid "only show brief summary (-qq for errors only)"
[351937d]1368msgstr "zobraz iba krátku správu (-qq iba pre chyby)"
[1c6c300]1369
1370#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
[11f3c9a]1371#: ../src/cavern.c:131
[4a78370]1372#: n:164
[1c6c300]1373msgid "do not create .err file"
[351937d]1374msgstr "nedá sa vytvoriť súbor s chybami"
[1c6c300]1375
1376#. TRANSLATORS: --help output for cavern --warnings-are-errors option
[11f3c9a]1377#: ../src/cavern.c:133
[4a78370]1378#: n:165
[1c6c300]1379msgid "turn warnings into errors"
[351937d]1380msgstr "zmena varovania na chyby"
[1c6c300]1381
1382#. TRANSLATORS: --help output for cavern --log option
[11f3c9a]1383#: ../src/cavern.c:135
[4a78370]1384#: n:170
[1c6c300]1385msgid "log output to .log file"
[351937d]1386msgstr "zápis výstupu do súboru .log"
[1c6c300]1387
1388#. TRANSLATORS: --help output for cavern --3d-version option
[11f3c9a]1389#: ../src/cavern.c:137
[4a78370]1390#: n:171
[1c6c300]1391msgid "specify the 3d file format version to output"
[351937d]1392msgstr "ktorú verziu 3d súboru použiť pre výstup"
[1c6c300]1393
1394#. TRANSLATORS: --help output for sorterr --horizontal option
[a665282]1395#: ../src/sorterr.c:53
[4a78370]1396#: n:179
[1c6c300]1397msgid "sort by horizontal error factor"
[351937d]1398msgstr "triedenie podľa horizontálnej chyby"
[1c6c300]1399
1400#. TRANSLATORS: --help output for sorterr --vertical option
[a665282]1401#: ../src/sorterr.c:55
[4a78370]1402#: n:180
[1c6c300]1403msgid "sort by vertical error factor"
[351937d]1404msgstr "triedenie podľa vertikálnej chyby"
[1c6c300]1405
1406#. TRANSLATORS: --help output for sorterr --percentage option
[a665282]1407#: ../src/sorterr.c:57
[4a78370]1408#: n:181
[1c6c300]1409msgid "sort by percentage error"
[351937d]1410msgstr "triedenie podľa perceptuálnej chyby"
[1c6c300]1411
1412#. TRANSLATORS: --help output for sorterr --per-leg option
[a665282]1413#: ../src/sorterr.c:59
[4a78370]1414#: n:182
[1c6c300]1415msgid "sort by error per leg"
[351937d]1416msgstr "triedenie podľa chyby ne zámeru"
[1c6c300]1417
1418#. TRANSLATORS: --help output for sorterr --replace option
[a665282]1419#: ../src/sorterr.c:61
[4a78370]1420#: n:183
[1c6c300]1421msgid "replace .err file with resorted version"
[351937d]1422msgstr "prepísať súbor .err novým triedením"
[1c6c300]1423
1424#. TRANSLATORS: --help output for dump3d --rewind option
[a665282]1425#: ../src/dump3d.c:51
[4a78370]1426#: n:204
[1c6c300]1427msgid "rewind file and read it a second time"
[351937d]1428msgstr "znova načítať súbor od začiatku"
[1c6c300]1429
[a665282]1430#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1431#. meaningless to say your tape is marked in "0 feet" (but you might
1432#. measure distance by counting knots on a diving line, and tie them
1433#. every "2 feet").
[a7d4233]1434#: ../src/commands.c:1417
[4a78370]1435#: n:200
[d86459c]1436msgid "*UNITS factor must be non-zero"
1437msgstr "*UNITS faktor musí byť nenulový"
1438
1439#. TRANSLATORS: In the "File" menu
[31f1db0]1440#: ../src/mainfrm.cc:802
[4a78370]1441#: n:201
[d86459c]1442msgid "&Screenshot…"
[b1afaf6]1443msgstr "Otlačok o&brazovky…"
[d86459c]1444
[31f1db0]1445#: ../src/mainfrm.cc:1454
[4a78370]1446#: n:202
[d86459c]1447#, c-format
[0804fbe]1448msgid "No survey data in 3d file “%s”"
1449msgstr "V 3d súbore “%s” nie sú údaje"
[d86459c]1450
[a720caa]1451#: ../src/gfxcore.cc:704
[4a78370]1452#: n:203
[d86459c]1453msgid "Facing"
1454msgstr "Smer"
1455
1456#. TRANSLATORS: for the title of the About box
[a665282]1457#: ../src/aboutdlg.cc:70
[4a78370]1458#: n:205
[d86459c]1459#, c-format
1460msgid "About %s"
1461msgstr "O %s"
1462
[a665282]1463#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1464#. - it should be translated to the terminology that cavers using the
1465#. language would use.
[97d5744]1466#.
[d86459c]1467#. File->Open dialog:
[31f1db0]1468#: ../src/mainfrm.cc:1928
[4a78370]1469#: n:206
[1c6c300]1470msgid "Select a survey file to view"
[b1afaf6]1471msgstr "Vyber súbor s meraním (survey)"
[d86459c]1472
[a7d4233]1473#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
1474#. file extension, so neither should be translated.
[31f1db0]1475#: ../src/mainfrm.cc:1905
[4a78370]1476#: n:207
[d86459c]1477msgid "Survex 3d files"
1478msgstr "3D súbory Survex"
1479
[31f1db0]1480#: ../src/mainfrm.cc:1920
1481#: ../src/mainfrm.cc:2357
1482#: ../src/printwx.cc:629
[4a78370]1483#: n:208
[d86459c]1484msgid "All files"
1485msgstr "Všetky súbory"
1486
[a665282]1487#. TRANSLATORS: Here "survey" is a "cave map" rather than
1488#. list of questions - it should be translated to the
1489#. terminology that cavers using the language would use.
[31f1db0]1490#: ../src/mainfrm.cc:1902
[4a78370]1491#: n:229
[1c6c300]1492msgid "All survey files"
[351937d]1493msgstr "Všetky súbory s meraním"
[1c6c300]1494
[a7d4233]1495#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
1496#. file extension, so neither should be translated.
[31f1db0]1497#: ../src/mainfrm.cc:1908
[4a78370]1498#: n:329
[1c6c300]1499msgid "Survex svx files"
[351937d]1500msgstr "Súbory svx Survexu"
[1c6c300]1501
[a665282]1502#. TRANSLATORS: "Compass" as in Larry Fish’s cave
[a7d4233]1503#. surveying package, so should not be translated
[31f1db0]1504#: ../src/mainfrm.cc:1916
[4a78370]1505#: n:330
[1c6c300]1506msgid "Compass DAT and MAK files"
[351937d]1507msgstr "Súbory DAT a MAK pre Compass"
[1c6c300]1508
[31f1db0]1509#: ../src/printwx.cc:277
[583c17d]1510#: n:411
1511msgid "DXF files"
1512msgstr "Súbory DXF"
1513
[31f1db0]1514#: ../src/printwx.cc:278
[583c17d]1515#: n:412
1516msgid "EPS files"
1517msgstr "Súbory EPS"
1518
[31f1db0]1519#: ../src/printwx.cc:279
[583c17d]1520#: n:413
1521msgid "GPX files"
1522msgstr "Súbory GPX"
1523
[a7d4233]1524#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
1525#. on a (usually large) sheet of paper using a pen mounted in a motorised
1526#. mechanism.
[31f1db0]1527#: ../src/printwx.cc:283
[583c17d]1528#: n:414
1529msgid "HPGL for plotters"
1530msgstr "Súbory HPGL pre plotry"
1531
[31f1db0]1532#: ../src/printwx.cc:285
[aa430ec]1533#: n:444
1534msgid "KML files"
1535msgstr "Súbory KML"
1536
[a7d4233]1537#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
1538#. so should not be translated:
1539#. http://www.fountainware.com/compass/
1540#. http://www.psc-cavers.org/carto/
[31f1db0]1541#: ../src/printwx.cc:290
[583c17d]1542#: n:415
1543msgid "Compass PLT for use with Carto"
1544msgstr "Súbory Compass PLT pre použitie v prog. Carto"
1545
[a7d4233]1546#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
1547#. translated: http://www.skencil.org/
[31f1db0]1548#: ../src/printwx.cc:293
[583c17d]1549#: n:416
[9fc1cac]1550msgid "Skencil files"
1551msgstr "Súbory Skencil"
[583c17d]1552
[31f1db0]1553#: ../src/printwx.cc:294
[583c17d]1554#: n:417
1555msgid "SVG files"
1556msgstr "Súbory SVG"
[1c6c300]1557
[31f1db0]1558#: ../src/printwx.cc:284
1559#: n:445
1560msgid "JSON files"
1561msgstr ""
1562
[a665282]1563#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1564#. - it should be translated to the terminology that cavers using the
1565#. language would use.
[97d5744]1566#.
1567#. This string is used in the about box (summarising the purpose of aven).
[a7d4233]1568#: ../src/aboutdlg.cc:98
[4a78370]1569#: n:209
[d86459c]1570msgid "Survey visualisation tool"
1571msgstr "Vizualizácia polygónu"
1572
[a665282]1573#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
1574#. accelerator key.  The accelerators must be different within this group
[31f1db0]1575#: ../src/mainfrm.cc:967
[4a78370]1576#: n:210
[d86459c]1577msgid "&File"
1578msgstr "&Súbor"
1579
[31f1db0]1580#: ../src/mainfrm.cc:968
[4a78370]1581#: n:211
[d86459c]1582msgid "&Rotation"
1583msgstr "&Rotácia"
1584
[31f1db0]1585#: ../src/mainfrm.cc:969
[4a78370]1586#: n:212
[d86459c]1587msgid "&Orientation"
1588msgstr "&Orientácia"
1589
[31f1db0]1590#: ../src/mainfrm.cc:970
[4a78370]1591#: n:213
[d86459c]1592msgid "&View"
1593msgstr "&Pohľad"
1594
[31f1db0]1595#: ../src/mainfrm.cc:972
[4a78370]1596#: n:214
[d86459c]1597msgid "&Controls"
1598msgstr "O&vládanie"
1599
[31f1db0]1600#: ../src/mainfrm.cc:981
[4a78370]1601#: n:215
[d86459c]1602msgid "&Help"
1603msgstr "&Help"
1604
[31f1db0]1605#: ../src/mainfrm.cc:974
[4a78370]1606#: n:216
[d86459c]1607msgid "&Presentation"
1608msgstr "Pre&zentácia"
1609
[a7d4233]1610#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
1611#. some languages here:
1612#. http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
1613#: ../src/aboutdlg.cc:112
[4a78370]1614#: n:219
[d86459c]1615msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1616msgstr "Tento program je volný software; můžete jej šířit a modifikovat podle ustanovení Obecné veřejné licence GNU, vydávané Free Software Foundation; a to buď verze 2 této licence anebo (podle vašeho uvážení) kterékoli pozdější verze."
1617
[1c6c300]1618#. TRANSLATORS: Part of 3dtopos --help
[a665282]1619#: ../src/3dtopos.c:86
[4a78370]1620#: n:217
[1c6c300]1621msgid "3D_FILE [POS_FILE]"
[351937d]1622msgstr "3D_FILE [POS_FILE]"
[1c6c300]1623
1624#. TRANSLATORS: Part of diffpos --help
[a665282]1625#: ../src/diffpos.c:265
[4a78370]1626#: n:218
[1c6c300]1627msgid "FILE1 FILE2 [THRESHOLD]"
[351937d]1628msgstr "FILE1 FILE2 [THRESHOLD]"
[1c6c300]1629
1630#. TRANSLATORS: Part of diffpos --help
[a665282]1631#: ../src/diffpos.c:267
[4a78370]1632#: n:255
[399807d8]1633#, c-format
[1c6c300]1634msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
[351937d]1635msgstr "FILE1 a FILE2 môžu byť súbory .pos alebo .3d\nTHRESHOLD je max. ignorovateľná zmena pozdĺž ktorejkoľvek osi v metroch (defaultne %s)"
[1c6c300]1636
1637#. TRANSLATORS: Part of extend --help
[a7d4233]1638#: ../src/extend.c:481
[4a78370]1639#: n:267
[1c6c300]1640msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
[351937d]1641msgstr "INPUT_3D_FILE [OUTPUT_3D_FILE]"
[1c6c300]1642
1643#. TRANSLATORS: Part of sorterr --help
[a665282]1644#: ../src/sorterr.c:127
[4a78370]1645#: n:268
[a7b5554]1646msgid "ERR_FILE [HOW_MANY]"
1647msgstr "ERR_FILE [HOW_MANY]"
[1c6c300]1648
[a665282]1649#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1650#. - it should be translated to the terminology that cavers using the
1651#. language would use.
[97d5744]1652#.
1653#. Part of aven --help
[a665282]1654#: ../src/aven.cc:115
1655#: ../src/aven.cc:139
[4a78370]1656#: n:269
[1c6c300]1657msgid "[SURVEY_FILE]"
[351937d]1658msgstr "[SURVEY_FILE]"
[1c6c300]1659
[a665282]1660#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
1661#. accelerator key.
1662#.
[1c6c300]1663#. The string "\t" separates the menu text and any accelerator key.
[a665282]1664#.
1665#. "File" menu.  The accelerators must be different within this group.
[d86459c]1666#. c.f. 201, 380, 381.
[31f1db0]1667#: ../src/mainfrm.cc:795
[4a78370]1668#: n:220
[d86459c]1669msgid "&Open…\tCtrl+O"
1670msgstr "&Otvoriť…\tCtrl+O"
1671
[a665282]1672#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
[a7d4233]1673#. are surveys without date information.  Try to keep this fairly short.
1674#: ../src/gfxcore.cc:1048
[4a78370]1675#: n:221
[1c6c300]1676msgid "Undated"
[7196714]1677msgstr "Bez dátumu"
[1c6c300]1678
1679#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
[a7d4233]1680#. which aren’t part of a loop and so have no error information. Try to keep
1681#. this fairly short.
1682#: ../src/gfxcore.cc:1073
[4a78370]1683#: n:290
[1c6c300]1684msgid "Not in loop"
[351937d]1685msgstr "Nie je súčasťou uzavretého ťahu"
[d86459c]1686
[a665282]1687#. TRANSLATORS: error from:
1688#.
1689#. *data normal newline from to tape compass clino
[a7d4233]1690#: ../src/commands.c:1261
[4a78370]1691#: n:222
[ee7511a]1692msgid "NEWLINE can’t be the first reading"
[d86459c]1693msgstr "NEWLINE nemôže byť prvý údaj"
1694
[a665282]1695#. TRANSLATORS: error from:
1696#.
1697#. *data normal from to tape compass clino newline
[a7d4233]1698#: ../src/commands.c:1299
[4a78370]1699#: n:223
[ee7511a]1700msgid "NEWLINE can’t be the last reading"
[d86459c]1701msgstr "NEWLINE nemôže byť posledný údaj"
1702
[a665282]1703#. TRANSLATORS: Error given by something like:
1704#.
1705#. *data normal station tape compass clino
1706#.
1707#. ("station" signifies interleaved data).
[a7d4233]1708#: ../src/commands.c:1322
[4a78370]1709#: n:224
[d86459c]1710msgid "Interleaved readings, but no NEWLINE"
1711msgstr "Vložené údaje, ale nie NEWLINE"
1712
[a665282]1713#. TRANSLATORS: caused by e.g.
1714#.
1715#. *data diving station newline depth tape compass
1716#.
1717#. ("depth" needs to occur before "newline").
[a7d4233]1718#: ../src/commands.c:1198
[4a78370]1719#: n:225
[d86459c]1720#, c-format
[0804fbe]1721msgid "Reading “%s” must occur before NEWLINE"
1722msgstr "Údaj “%s” musí predchádzať NEWLINE"
[d86459c]1723
[a665282]1724#. TRANSLATORS: e.g.
1725#.
1726#. *data normal from to tape newline compass clino
[a7d4233]1727#: ../src/commands.c:1251
[4a78370]1728#: n:226
[d86459c]1729msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1730msgstr "NEWLINE môže byť zpracované iba pri STATION, DEPTH, a COUNT"
1731
[a7d4233]1732#. TRANSLATORS: e.g.
1733#.
1734#. *calibrate tape compass 1 1
1735#: ../src/commands.c:1455
[4a78370]1736#: n:227
[ee7511a]1737msgid "Can’t calibrate angular and length quantities together"
[d86459c]1738msgstr "Nie je možné nakalibrovať uhlovýé a dļžkové údaje naraz"
1739
[dfc141d]1740#: ../src/commands.c:589
[9e5ad92]1741#: n:397
1742msgid "Bad *alias command"
1743msgstr ""
1744
[a665282]1745#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1746#. currently)
1747#: ../src/log.cc:32
[4a78370]1748#: n:228
[399807d8]1749#, c-format
[1c6c300]1750msgid "%s Error Log"
[351937d]1751msgstr "%s záznam chýb"
[d86459c]1752
[a665282]1753#. TRANSLATORS: The text on the action button in the "Export" settings
1754#. dialog
[31f1db0]1755#: ../src/printwx.cc:588
[4a78370]1756#: n:230
[d86459c]1757msgid "&Export…"
1758msgstr "&Export…"
1759
[a665282]1760#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
1761#. this group.  Tickable menu item which toggles auto rotation
[31f1db0]1762#: ../src/mainfrm.cc:823
[4a78370]1763#: n:231
[d86459c]1764msgid "Au&to-Rotate\tSpace"
1765msgstr "&Autorotácia\tSpace"
1766
[31f1db0]1767#: ../src/mainfrm.cc:825
[4a78370]1768#: n:232
[d86459c]1769msgid "Speed &Up"
1770msgstr "Z&rýchliť rotáciu"
1771
[31f1db0]1772#: ../src/mainfrm.cc:826
[4a78370]1773#: n:233
[d86459c]1774msgid "Slow &Down"
1775msgstr "&Spomaliť rotáciu"
1776
[31f1db0]1777#: ../src/mainfrm.cc:828
[4a78370]1778#: n:234
[d86459c]1779msgid "&Reverse Direction"
1780msgstr "&Otočiť rotáciu"
1781
[31f1db0]1782#: ../src/mainfrm.cc:830
[4a78370]1783#: n:235
[d86459c]1784msgid "Step Once &Anticlockwise"
1785msgstr "Jeden krok proti s&meru otáčania hodín"
1786
[31f1db0]1787#: ../src/mainfrm.cc:831
[4a78370]1788#: n:236
[d86459c]1789msgid "Step Once &Clockwise"
1790msgstr "Jeden krok po smere otáča&nia hodín"
1791
1792#. TRANSLATORS: View *looking* North
[a7d4233]1793#: ../src/gfxcore.cc:3262
[31f1db0]1794#: ../src/mainfrm.cc:834
[4a78370]1795#: n:240
[d86459c]1796msgid "View &North"
1797msgstr "Pohľad na &sever"
1798
1799#. TRANSLATORS: View *looking* East
[a7d4233]1800#: ../src/gfxcore.cc:3264
[31f1db0]1801#: ../src/mainfrm.cc:835
[4a78370]1802#: n:241
[d86459c]1803msgid "View &East"
1804msgstr "Pohľad na &východ"
1805
1806#. TRANSLATORS: View *looking* South
[a7d4233]1807#: ../src/gfxcore.cc:3266
[31f1db0]1808#: ../src/mainfrm.cc:836
[4a78370]1809#: n:242
[d86459c]1810msgid "View &South"
1811msgstr "Pohľad na &juh"
1812
1813#. TRANSLATORS: View *looking* West
[a7d4233]1814#: ../src/gfxcore.cc:3268
[31f1db0]1815#: ../src/mainfrm.cc:837
[4a78370]1816#: n:243
[d86459c]1817msgid "View &West"
1818msgstr "Pohľad na &západ"
1819
[a665282]1820#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1821#. - it should be translated to the terminology that cavers using the
1822#. language would use.
[31f1db0]1823#: ../src/mainfrm.cc:842
[4a78370]1824#: n:244
[d86459c]1825msgid "Shift Survey &Left"
1826msgstr "Posunúť do&lava"
1827
[a665282]1828#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1829#. - it should be translated to the terminology that cavers using the
1830#. language would use.
[31f1db0]1831#: ../src/mainfrm.cc:846
[4a78370]1832#: n:245
[d86459c]1833msgid "Shift Survey &Right"
1834msgstr "Posunúť dop&rava"
1835
[a665282]1836#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1837#. - it should be translated to the terminology that cavers using the
1838#. language would use.
[31f1db0]1839#: ../src/mainfrm.cc:850
[4a78370]1840#: n:246
[d86459c]1841msgid "Shift Survey &Up"
1842msgstr "Posunúť do&hora"
1843
[a665282]1844#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1845#. - it should be translated to the terminology that cavers using the
1846#. language would use.
[31f1db0]1847#: ../src/mainfrm.cc:854
[4a78370]1848#: n:247
[d86459c]1849msgid "Shift Survey &Down"
1850msgstr "Posunúť &dolu"
1851
[a7d4233]1852#: ../src/gfxcore.cc:3285
[31f1db0]1853#: ../src/mainfrm.cc:856
[4a78370]1854#: n:248
[d86459c]1855msgid "&Plan View"
1856msgstr "&Pôdorys"
1857
[a7d4233]1858#: ../src/gfxcore.cc:3286
[31f1db0]1859#: ../src/mainfrm.cc:857
[4a78370]1860#: n:249
[d86459c]1861msgid "Ele&vation"
1862msgstr "R&ez"
1863
[31f1db0]1864#: ../src/mainfrm.cc:859
[4a78370]1865#: n:250
[d86459c]1866msgid "&Higher Viewpoint"
1867msgstr "Zväčšiť &náklon"
1868
[31f1db0]1869#: ../src/mainfrm.cc:860
[4a78370]1870#: n:251
[d86459c]1871msgid "L&ower Viewpoint"
1872msgstr "Z&menšiť náklon"
1873
[31f1db0]1874#: ../src/mainfrm.cc:863
[4a78370]1875#: n:252
[d86459c]1876msgid "&Zoom In\t]"
1877msgstr "Zväčš&iť\t]"
1878
[31f1db0]1879#: ../src/mainfrm.cc:864
[4a78370]1880#: n:253
[d86459c]1881msgid "Zoo&m Out\t["
1882msgstr "Zmenši&t\t["
1883
[31f1db0]1884#: ../src/mainfrm.cc:866
[4a78370]1885#: n:254
[d86459c]1886msgid "Restore De&fault View"
1887msgstr "&Obnovenie východzieho pohľadu"
1888
[a665282]1889#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1890#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1891#. the "what to print/export" dialog.
[31f1db0]1892#: ../src/printwx.cc:366
[4a78370]1893#: n:283
[8011e0c]1894msgid "View"
1895msgstr "Pohľad na"
1896
[a665282]1897#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1898#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1899#. "Elements" isn’t a good name for this but nothing better has yet come to
1900#. mind!
[31f1db0]1901#: ../src/printwx.cc:371
[4a78370]1902#: n:256
[d86459c]1903msgid "Elements"
1904msgstr "Objekty"
1905
[31f1db0]1906#: ../src/printwx.cc:377
1907#: n:410
1908msgid "Export format"
1909msgstr ""
1910
1911#: ../src/printwx.cc:426
1912#: ../src/printwx.cc:801
[4a78370]1913#: n:257
[d86459c]1914#, c-format
1915msgid "%d pages (%dx%d)"
1916msgstr "%d stránok (%dx%d)"
1917
[a665282]1918#. TRANSLATORS: used in the scale drop down selector in the print
1919#. dialog the implicit meaning is "choose a suitable scale to fit
1920#. the plot on a single page", but we need something shorter
[31f1db0]1921#: ../src/printwx.cc:408
1922#: ../src/printwx.cc:820
[4a78370]1923#: n:258
[d86459c]1924msgid "One page"
1925msgstr "Jednu stránku"
1926
[31f1db0]1927#: ../src/mainfrm.cc:162
1928#: ../src/printwx.cc:439
[4a78370]1929#: n:259
[d86459c]1930msgid "Bearing"
1931msgstr "Azimut"
1932
[31f1db0]1933#: ../src/printwx.cc:478
[4a78370]1934#: n:260
[d86459c]1935msgid "Station Names"
1936msgstr "Mená bodov"
1937
[31f1db0]1938#: ../src/printwx.cc:474
[4a78370]1939#: n:261
[d86459c]1940msgid "Crosses"
1941msgstr "Krížiky"
1942
[97d5744]1943#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1944#. "survey stations".
[31f1db0]1945#: ../src/printwx.cc:464
[4a78370]1946#: n:262
[d86459c]1947msgid "Underground Survey Legs"
1948msgstr "Zámery pod povrchom"
1949
[31f1db0]1950#: ../src/printwx.cc:494
[97d5744]1951#: n:393
1952msgid "Cross-sections"
1953msgstr ""
1954
[31f1db0]1955#: ../src/printwx.cc:499
[97d5744]1956#: n:394
1957msgid "Walls"
[6eef93d]1958msgstr "Steny"
[97d5744]1959
[31f1db0]1960#: ../src/printwx.cc:503
[97d5744]1961#: n:395
1962msgid "Passages"
[6eef93d]1963msgstr "Chodby"
[97d5744]1964
[31f1db0]1965#: ../src/printwx.cc:507
[57f70f2]1966#: n:421
1967msgid "Origin in centre"
1968msgstr ""
1969
[31f1db0]1970#: ../src/printwx.cc:511
[57f70f2]1971#: n:422
1972msgid "Full coordinates"
1973msgstr ""
1974
[d86459c]1975#. TRANSLATORS: Used in the print dialog:
[31f1db0]1976#: ../src/printwx.cc:445
[4a78370]1977#: n:263
[d86459c]1978msgid "Tilt angle"
1979msgstr "Náklon"
1980
[a665282]1981#. TRANSLATORS: used in the print dialog - controls drawing lines
1982#. around each page
[31f1db0]1983#: ../src/printwx.cc:519
[4a78370]1984#: n:264
[d86459c]1985msgid "Page Borders"
1986msgstr "Rámček"
1987
[a665282]1988#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
1989#. controls drawing the box at the lower left with survey name, view
1990#. angles, etc
[31f1db0]1991#: ../src/printwx.cc:530
[4a78370]1992#: n:265
[08e858b]1993msgid "Legend"
[d86459c]1994msgstr "Popiska"
1995
[a665282]1996#. TRANSLATORS: will be used in the print dialog - check this to print
1997#. blank pages (otherwise they’ll be skipped to save paper)
[31f1db0]1998#: ../src/printwx.cc:525
[4a78370]1999#: n:266
[d86459c]2000msgid "Blank Pages"
2001msgstr "Prázdne stránky"
2002
[6fe33ed]2003#. TRANSLATORS: Items in the "View" menu:
[31f1db0]2004#: ../src/mainfrm.cc:883
[4a78370]2005#: n:270
[d86459c]2006msgid "Station &Names\tCtrl+N"
2007msgstr "&Mená bodov\tCtrl+N"
2008
[6fe33ed]2009#. TRANSLATORS: Toggles drawing of 3D passages
[31f1db0]2010#: ../src/mainfrm.cc:885
[4a78370]2011#: n:346
[6fe33ed]2012msgid "Passage &Tubes\tCtrl+T"
2013msgstr "Chodby &rúrovité\tCtrl+T"
2014
[31f1db0]2015#: ../src/mainfrm.cc:886
[4a78370]2016#: n:271
[d86459c]2017msgid "&Crosses\tCtrl+X"
2018msgstr "&Krížiky\tCtrl+X"
2019
[31f1db0]2020#: ../src/mainfrm.cc:887
[4a78370]2021#: n:297
[6fe33ed]2022msgid "&Grid\tCtrl+G"
2023msgstr "&Sieť\tCtrl+G"
2024
[31f1db0]2025#: ../src/mainfrm.cc:888
[4a78370]2026#: n:318
[6fe33ed]2027msgid "&Bounding Box\tCtrl+B"
2028msgstr "&Ohraničenie\tCtrl+B"
2029
[97d5744]2030#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2031#. "survey stations".
[31f1db0]2032#: ../src/mainfrm.cc:892
[4a78370]2033#: n:272
[d86459c]2034msgid "&Underground Survey Legs\tCtrl+L"
2035msgstr "Zámery &pod povrchom\tCtrl+L"
2036
[97d5744]2037#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2038#. "survey stations".
[31f1db0]2039#: ../src/mainfrm.cc:895
[4a78370]2040#: n:291
[6fe33ed]2041msgid "&Surface Survey Legs\tCtrl+F"
2042msgstr "Zámery &na povrchu\tCtrl+F"
2043
[31f1db0]2044#: ../src/mainfrm.cc:904
[4a78370]2045#: n:273
[d86459c]2046msgid "&Overlapping Names"
2047msgstr "Pr&ekrývajúce sa mená"
2048
[a7d4233]2049#: ../src/gfxcore.cc:3323
[31f1db0]2050#: ../src/mainfrm.cc:905
[4a78370]2051#: n:292
[6fe33ed]2052msgid "Colour by &Depth"
2053msgstr "Farba podľa &hļbky"
2054
[a7d4233]2055#: ../src/gfxcore.cc:3324
[31f1db0]2056#: ../src/mainfrm.cc:906
[4a78370]2057#: n:293
[6fe33ed]2058msgid "Colour by D&ate"
2059msgstr "Farna podľa &dátumu"
2060
[a7d4233]2061#: ../src/gfxcore.cc:3325
[31f1db0]2062#: ../src/mainfrm.cc:907
[4a78370]2063#: n:289
[6fe33ed]2064msgid "Colour by E&rror"
2065msgstr "Colour &by Error"
2066
[31f1db0]2067#: ../src/mainfrm.cc:909
[4a78370]2068#: n:294
[6fe33ed]2069msgid "Highlight &Entrances"
2070msgstr "Zvýrazniť &vchody"
2071
[31f1db0]2072#: ../src/mainfrm.cc:910
[4a78370]2073#: n:295
[6fe33ed]2074msgid "Highlight &Fixed Points"
2075msgstr "Zvýrazniť &fixné body"
2076
[31f1db0]2077#: ../src/mainfrm.cc:911
[4a78370]2078#: n:296
[6fe33ed]2079msgid "Highlight E&xported Points"
2080msgstr "Zvýrazniť e&xportované body"
2081
[31f1db0]2082#: ../src/printwx.cc:482
[57f70f2]2083#: n:418
2084msgid "Entrances"
2085msgstr "Vchody"
2086
[31f1db0]2087#: ../src/printwx.cc:486
[57f70f2]2088#: n:419
2089msgid "Fixed Points"
2090msgstr "Fixné body"
2091
[31f1db0]2092#: ../src/printwx.cc:490
[57f70f2]2093#: n:420
2094msgid "Exported Stations"
2095msgstr "Exportované body"
2096
[31f1db0]2097#: ../src/mainfrm.cc:916
[4a78370]2098#: n:237
[6fe33ed]2099msgid "&Perspective"
2100msgstr "Perspektív&a"
2101
[31f1db0]2102#: ../src/mainfrm.cc:918
[4a78370]2103#: n:238
[6fe33ed]2104msgid "Textured &Walls"
2105msgstr "&Texturované steny"
2106
[a665282]2107#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2108#. using that term instead if it gives a better translation which most
2109#. users will understand.
[31f1db0]2110#: ../src/mainfrm.cc:922
[4a78370]2111#: n:239
[6fe33ed]2112msgid "Fade Distant Ob&jects"
2113msgstr "Hm&listý opar"
2114
[97d5744]2115#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2116#. "survey stations".
[31f1db0]2117#: ../src/mainfrm.cc:925
[4a78370]2118#: n:298
[6fe33ed]2119msgid "Smoot&hed Survey Legs"
2120msgstr "V&yrovnané zámery"
2121
[31f1db0]2122#: ../src/mainfrm.cc:931
2123#: ../src/mainfrm.cc:935
[4a78370]2124#: n:356
[6fe33ed]2125msgid "Full Screen &Mode\tF11"
2126msgstr "&Celoobrazovkový režim\tF11"
2127
[31f1db0]2128#: ../src/mainfrm.cc:949
[4a78370]2129#: n:274
[d86459c]2130msgid "&Compass"
2131msgstr "&Kompas"
2132
[31f1db0]2133#: ../src/mainfrm.cc:950
[4a78370]2134#: n:275
[d86459c]2135msgid "C&linometer"
2136msgstr "&Sklonomer"
2137
[b1afaf6]2138#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2139#. corresponds to which depth, date, survey closure error, etc.
[31f1db0]2140#: ../src/mainfrm.cc:953
[4a78370]2141#: n:276
[8011e0c]2142msgid "Colour &Key"
[b1afaf6]2143msgstr "Priradenie &Farieb"
[d86459c]2144
[31f1db0]2145#: ../src/mainfrm.cc:954
[4a78370]2146#: n:277
[d86459c]2147msgid "&Scale Bar"
2148msgstr "&Merítko"
2149
[31f1db0]2150#: ../src/mainfrm.cc:944
[4a78370]2151#: n:280
[d86459c]2152msgid "&Reverse Sense\tCtrl+R"
2153msgstr "Obrátený sme&r\tCtrl+R"
2154
[31f1db0]2155#: ../src/mainfrm.cc:914
2156#: ../src/mainfrm.cc:946
[4a78370]2157#: n:281
[d86459c]2158msgid "&Cancel Measuring Line\tEscape"
[9b9561b]2159msgstr "&Zrušit líniu meraní\tEscape"
[d86459c]2160
[31f1db0]2161#: ../src/mainfrm.cc:955
[4a78370]2162#: n:299
[d86459c]2163msgid "&Indicators"
2164msgstr "Indiká&tory"
2165
[aa430ec]2166#: ../src/z_getopt.c:697
2167#: ../src/z_getopt.c:709
[4a78370]2168#: n:300
[d86459c]2169#, c-format
[0804fbe]2170msgid "%s: option “%s” is ambiguous\n"
2171msgstr "%s: možnosť “%s” je dvojznačná\n"
[d86459c]2172
[aa430ec]2173#: ../src/z_getopt.c:1025
2174#: ../src/z_getopt.c:1036
[4a78370]2175#: n:301
[d86459c]2176#, c-format
[0804fbe]2177msgid "%s: option “-W %s” is ambiguous\n"
2178msgstr "%s: možnosť “-W %s” je dvojznačná\n"
[d86459c]2179
[aa430ec]2180#: ../src/z_getopt.c:753
2181#: ../src/z_getopt.c:757
[4a78370]2182#: n:302
[d86459c]2183#, c-format
[ee7511a]2184msgid "%s: option “%c%s” doesn’t allow an argument\n"
[0804fbe]2185msgstr "%s: možnosť “%c%s” neumožňuje argument\n"
[d86459c]2186
[aa430ec]2187#: ../src/z_getopt.c:742
2188#: ../src/z_getopt.c:745
[4a78370]2189#: n:303
[d86459c]2190#, c-format
[ee7511a]2191msgid "%s: option “--%s” doesn’t allow an argument\n"
[0804fbe]2192msgstr "%s: možnosť “--%s” neumožňuje argument\n"
[d86459c]2193
[aa430ec]2194#: ../src/z_getopt.c:1060
2195#: ../src/z_getopt.c:1071
[4a78370]2196#: n:304
[d86459c]2197#, c-format
[ee7511a]2198msgid "%s: option “-W %s” doesn’t allow an argument\n"
[0804fbe]2199msgstr "%s: možnosť “-W %s” neumožňuje argument\n"
[d86459c]2200
[aa430ec]2201#: ../src/z_getopt.c:792
2202#: ../src/z_getopt.c:804
2203#: ../src/z_getopt.c:1091
2204#: ../src/z_getopt.c:1103
[4a78370]2205#: n:305
[d86459c]2206#, c-format
[0804fbe]2207msgid "%s: option “%s” requires an argument\n"
2208msgstr "%s: možnosť “%s” vyžaduje argument\n"
[d86459c]2209
[aa430ec]2210#: ../src/z_getopt.c:962
2211#: ../src/z_getopt.c:973
2212#: ../src/z_getopt.c:1156
2213#: ../src/z_getopt.c:1168
[4a78370]2214#: n:306
[d86459c]2215#, c-format
2216msgid "%s: option requires an argument -- %c\n"
2217msgstr "%s: možnosť vyžaduje argument -- %c\n"
2218
[aa430ec]2219#: ../src/z_getopt.c:842
2220#: ../src/z_getopt.c:845
[4a78370]2221#: n:307
[d86459c]2222#, c-format
[0804fbe]2223msgid "%s: unrecognized option “--%s”\n"
2224msgstr "%s: nerozpoznaná možnosť “--%s”\n"
[d86459c]2225
[aa430ec]2226#: ../src/z_getopt.c:853
2227#: ../src/z_getopt.c:856
[4a78370]2228#: n:308
[d86459c]2229#, c-format
[0804fbe]2230msgid "%s: unrecognized option “%c%s”\n"
2231msgstr "%s: nerozpoznaná možnosť “%c%s”\n"
[d86459c]2232
[aa430ec]2233#: ../src/z_getopt.c:903
2234#: ../src/z_getopt.c:906
[4a78370]2235#: n:309
[d86459c]2236#, c-format
2237msgid "%s: illegal option -- %c\n"
2238msgstr "%s: nepovolená možnosť -- %c\n"
2239
[aa430ec]2240#: ../src/z_getopt.c:912
2241#: ../src/z_getopt.c:915
[4a78370]2242#: n:310
[d86459c]2243#, c-format
2244msgid "%s: invalid option -- %c\n"
2245msgstr "%s: nesprávna možnosť -- %c\n"
2246
[31f1db0]2247#: ../src/mainfrm.cc:869
[4a78370]2248#: n:311
[d86459c]2249msgid "&New Presentation"
2250msgstr "&Nová prezentácia"
2251
[31f1db0]2252#: ../src/mainfrm.cc:870
[4a78370]2253#: n:312
[d86459c]2254msgid "&Open Presentation…"
2255msgstr "&Otvoriť prezentáciu…"
2256
[31f1db0]2257#: ../src/mainfrm.cc:871
[4a78370]2258#: n:313
[d86459c]2259msgid "&Save Presentation"
2260msgstr "&Ulož prezentáciu"
2261
[31f1db0]2262#: ../src/mainfrm.cc:872
[4a78370]2263#: n:314
[d86459c]2264msgid "Sa&ve Presentation As…"
2265msgstr "Ulož prezentáciu a&ko…"
2266
2267#. TRANSLATORS: "Mark" as in "Mark this position"
[31f1db0]2268#: ../src/mainfrm.cc:875
[4a78370]2269#: n:315
[d86459c]2270msgid "&Mark"
2271msgstr "&Zvýrazni"
2272
2273#. TRANSLATORS: "Play" as in "Play back a recording"
[31f1db0]2274#: ../src/mainfrm.cc:877
[4a78370]2275#: n:316
[d86459c]2276msgid "Pla&y"
2277msgstr "&Prehrať"
2278
[31f1db0]2279#: ../src/mainfrm.cc:878
[4a78370]2280#: n:317
[d86459c]2281msgid "&Export as Movie…"
2282msgstr "&Vyexportuj ako film…"
2283
[31f1db0]2284#: ../src/mainfrm.cc:2434
[4a78370]2285#: n:331
[1c6c300]2286msgid "Export Movie"
[351937d]2287msgstr "vygeneruj film"
[1c6c300]2288
[31f1db0]2289#: ../src/mainfrm.cc:370
[4a78370]2290#: n:319
[d86459c]2291msgid "Select an output filename"
2292msgstr "Zvoliť meno výstupného súboru"
2293
[31f1db0]2294#: ../src/mainfrm.cc:367
2295#: ../src/mainfrm.cc:2356
[4a78370]2296#: n:320
[d86459c]2297msgid "Aven presentations"
2298msgstr "Prezentácie programu Aven"
2299
2300#. TRANSLATORS: title of the save screenshot dialog
[31f1db0]2301#: ../src/mainfrm.cc:1942
[4a78370]2302#: n:321
[d86459c]2303msgid "Save Screenshot"
2304msgstr "Uložiť otlačok obrazovky"
2305
[31f1db0]2306#: ../src/mainfrm.cc:2351
2307#: ../src/mainfrm.cc:2354
[4a78370]2308#: n:322
[d86459c]2309msgid "Select a presentation to open"
2310msgstr "Vybrať prezentáciu pre otvorenie"
2311
[31f1db0]2312#: ../src/mainfrm.cc:449
[4a78370]2313#: n:323
[d86459c]2314#, c-format
[0804fbe]2315msgid "Error in format of presentation file “%s”"
2316msgstr "Chyba vo formáte prezentačného súboru “%s”"
[d86459c]2317
[a665282]2318#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2319#. surveying package, so probably shouldn’t be translated
[31f1db0]2320#: ../src/mainfrm.cc:1912
[4a78370]2321#: n:324
[d86459c]2322msgid "Compass PLT files"
2323msgstr "Súbory Compass PLT"
2324
[a665282]2325#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2326#. package, so don’t translate it.
[31f1db0]2327#: ../src/mainfrm.cc:1919
[4a78370]2328#: n:325
[d86459c]2329msgid "CMAP XYZ files"
2330msgstr "Súbory CMAP XYZ"
2331
2332#. TRANSLATORS: title of message box
[31f1db0]2333#: ../src/mainfrm.cc:2005
2334#: ../src/mainfrm.cc:2328
2335#: ../src/mainfrm.cc:2345
[4a78370]2336#: n:326
[d86459c]2337msgid "Modified Presentation"
2338msgstr "Upravená prezentácia"
2339
2340#. TRANSLATORS: and the question in that box
[31f1db0]2341#: ../src/mainfrm.cc:2003
2342#: ../src/mainfrm.cc:2327
2343#: ../src/mainfrm.cc:2344
[4a78370]2344#: n:327
[d86459c]2345msgid "The current presentation has been modified.  Abandon unsaved changes?"
2346msgstr "Prezentácia bola zmenená. Nechcete radšej uožiť zmeny?"
2347
[31f1db0]2348#: ../src/mainfrm.cc:2645
2349#: ../src/mainfrm.cc:2656
[4a78370]2350#: n:328
[d86459c]2351msgid "No matches were found."
2352msgstr "Neúspešné hľadanie."
2353
[1c6c300]2354#. TRANSLATORS: "Find stations" button tooltip
[31f1db0]2355#: ../src/mainfrm.cc:1029
[4a78370]2356#: n:332
[d86459c]2357msgid "Find"
2358msgstr "Hľadať"
2359
[1c6c300]2360#. TRANSLATORS: "Hide stations" button default tooltip
[31f1db0]2361#: ../src/mainfrm.cc:1031
2362#: ../src/mainfrm.cc:2688
[4a78370]2363#: n:333
[d86459c]2364msgid "Hide"
2365msgstr "Schovať"
2366
[1c6c300]2367#. TRANSLATORS: "Hide stations" button tooltip when stations are found
[31f1db0]2368#: ../src/mainfrm.cc:2649
[4a78370]2369#: n:334
[1c6c300]2370#, c-format
2371msgid "Hide %d found stations"
[b1afaf6]2372msgstr "Skryť %d nájdených bodov"
[1c6c300]2373
[31f1db0]2374#: ../src/mainfrm.cc:250
2375#: ../src/mainfrm.cc:2093
2376#: ../src/mainfrm.cc:2174
2377#: ../src/mainfrm.cc:2226
[4a78370]2378#: n:335
[d86459c]2379msgid "Altitude"
2380msgstr "Nadmorská výška"
2381
[a665282]2382#. TRANSLATORS: error if you try to drag multiple files to the aven
2383#. window
[31f1db0]2384#: ../src/mainfrm.cc:727
[4a78370]2385#: n:336
[d86459c]2386msgid "You may only view one 3d file at a time."
2387msgstr "Môžete prehliadať iba jeden 3D súbor"
2388
[31f1db0]2389#: ../src/mainfrm.cc:956
[4a78370]2390#: n:337
[d86459c]2391msgid "&Side Panel"
2392msgstr "&Postranný panel"
2393
[a665282]2394#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2395#. Easting)
[31f1db0]2396#: ../src/mainfrm.cc:2091
2397#: ../src/mainfrm.cc:2113
2398#: ../src/mainfrm.cc:2115
2399#: ../src/mainfrm.cc:2225
[4a78370]2400#: n:338
[d86459c]2401msgid "%.2f E, %.2f N"
2402msgstr "%.2f V, %.2f S"
2403
2404#. TRANSLATORS: Used in Aven:
2405#. From <stationname>
2406#. H: 123.45m V: 234.56m
2407#. Dist: 456.78m  Brg: 200
[31f1db0]2408#: ../src/mainfrm.cc:2133
2409#: ../src/mainfrm.cc:2183
2410#: ../src/mainfrm.cc:2245
[4a78370]2411#: n:339
[d86459c]2412#, c-format
2413msgid "From %s"
2414msgstr "Od %s"
2415
2416#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
[31f1db0]2417#: ../src/mainfrm.cc:2258
[4a78370]2418#: n:340
[d86459c]2419#, c-format
2420msgid "H %.2f%s, V %.2f%s"
[577b94d]2421msgstr "H %.2f%s, V %.2f%s"
[d86459c]2422
[a665282]2423#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2424#. in Compass bearing)
[31f1db0]2425#: ../src/mainfrm.cc:2270
[4a78370]2426#: n:341
[d86459c]2427#, c-format
2428msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2429msgstr "%s: %s, Vzd %.2f%s, Azim %03d%s"
2430
[a720caa]2431#. TRANSLATORS: tickable menu item in View menu.
[a7d4233]2432#.
2433#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
2434#: ../src/gfxcore.cc:3314
2435#: ../src/gfxcore.cc:3332
[31f1db0]2436#: ../src/mainfrm.cc:958
[4a78370]2437#: n:342
[d86459c]2438msgid "&Metric"
2439msgstr "&Metricky"
2440
[8fa7902]2441#. TRANSLATORS: tickable menu item in View menu.
[a665282]2442#.
2443#. Degrees are the angular measurement where there are 360 in a full
2444#. circle.
[a7d4233]2445#: ../src/gfxcore.cc:3276
2446#: ../src/gfxcore.cc:3294
[31f1db0]2447#: ../src/mainfrm.cc:959
[4a78370]2448#: n:343
[d86459c]2449msgid "&Degrees"
2450msgstr "&Stupne"
2451
[d171c0c]2452#. TRANSLATORS: tickable menu item in View menu.
[a665282]2453#.
2454#. Show the tilt of the survey as a percentage gradient (100% = 45
2455#. degrees = 50 grad).
[a7d4233]2456#: ../src/gfxcore.cc:3299
[31f1db0]2457#: ../src/mainfrm.cc:960
[d171c0c]2458#: n:430
2459#, fuzzy
2460msgid "&Percent"
2461msgstr "P&ercent"
2462
[a665282]2463#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2464#. used e.g.  "5km".
2465#.
2466#. If there should be a space between the number and this, include
2467#. one in the translation.
[a7d4233]2468#: ../src/gfxcore.cc:1146
[31f1db0]2469#: ../src/printwx.cc:1110
[ccb83b7]2470#: n:423
2471msgid "km"
[0bb6bef]2472msgstr "km"
[ccb83b7]2473
[a665282]2474#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2475#. e.g. "10m".
[ccb83b7]2476#.
[a665282]2477#. If there should be a space between the number and this, include
2478#. one in the translation.
[a720caa]2479#: ../src/gfxcore.cc:1018
[a7d4233]2480#: ../src/gfxcore.cc:1153
[31f1db0]2481#: ../src/mainfrm.cc:2082
2482#: ../src/mainfrm.cc:2149
2483#: ../src/mainfrm.cc:2169
2484#: ../src/mainfrm.cc:2218
2485#: ../src/mainfrm.cc:2249
2486#: ../src/printwx.cc:1112
[ccb83b7]2487#: n:424
[e9988b3]2488msgid "m"
[ba8f8d3]2489msgstr "m"
[e9988b3]2490
[a665282]2491#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2492#. used e.g.  "50cm".
[ccb83b7]2493#.
[a665282]2494#. If there should be a space between the number and this, include
2495#. one in the translation.
[a7d4233]2496#: ../src/gfxcore.cc:1161
[31f1db0]2497#: ../src/printwx.cc:1115
[ccb83b7]2498#: n:425
2499msgid "cm"
[07e28a3]2500msgstr "cm"
[ccb83b7]2501
[a665282]2502#. TRANSLATORS: abbreviation for "miles" (unit of length,
2503#. plural), used e.g.  "2 miles".
[ccb83b7]2504#.
[a665282]2505#. If there should be a space between the number and this,
2506#. include one in the translation.
[a7d4233]2507#: ../src/gfxcore.cc:1174
[ccb83b7]2508#: n:426
2509msgid " miles"
2510msgstr ""
2511
[a665282]2512#. TRANSLATORS: abbreviation for "mile" (unit of length,
2513#. singular), used e.g.  "1 mile".
[ccb83b7]2514#.
[a665282]2515#. If there should be a space between the number and this,
2516#. include one in the translation.
[a7d4233]2517#: ../src/gfxcore.cc:1181
[ccb83b7]2518#: n:427
2519msgid " mile"
2520msgstr ""
2521
[a665282]2522#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2523#. as "10ft".
[ccb83b7]2524#.
[a665282]2525#. If there should be a space between the number and this, include
2526#. one in the translation.
[a720caa]2527#: ../src/gfxcore.cc:1018
[a7d4233]2528#: ../src/gfxcore.cc:1189
[31f1db0]2529#: ../src/mainfrm.cc:2087
2530#: ../src/mainfrm.cc:2152
2531#: ../src/mainfrm.cc:2172
2532#: ../src/mainfrm.cc:2223
2533#: ../src/mainfrm.cc:2254
[ccb83b7]2534#: n:428
[e9988b3]2535msgid "ft"
[ba8f8d3]2536msgstr "ft"
[e9988b3]2537
[a665282]2538#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2539#. e.g. as "6in".
[ccb83b7]2540#.
[a665282]2541#. If there should be a space between the number and this, include
2542#. one in the translation.
[a7d4233]2543#: ../src/gfxcore.cc:1197
[ccb83b7]2544#: n:429
2545msgid "in"
2546msgstr ""
2547
[b1afaf6]2548#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
[a7d4233]2549#: ../src/gfxcore.cc:3271
[4a78370]2550#: n:387
[399807d8]2551msgid "&Hide Compass"
[351937d]2552msgstr "&skryť azimut"
[399807d8]2553
[b1afaf6]2554#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
[a7d4233]2555#: ../src/gfxcore.cc:3289
[4a78370]2556#: n:384
[399807d8]2557msgid "&Hide Clino"
[351937d]2558msgstr "&skryť sklon"
[399807d8]2559
[b1afaf6]2560#. TRANSLATORS: Menu item which turns off the scale bar in aven.
[a7d4233]2561#: ../src/gfxcore.cc:3309
[4a78370]2562#: n:385
[399807d8]2563msgid "&Hide scale bar"
[351937d]2564msgstr "&skryť mierku"
[399807d8]2565
[b1afaf6]2566#. TRANSLATORS: Menu item which turns off the colour key.
2567#. The "Colour Key" is the thing in aven showing which colour
2568#. corresponds to which depth, date, survey closure error, etc.
[a7d4233]2569#: ../src/gfxcore.cc:3330
[4a78370]2570#: n:386
[399807d8]2571msgid "&Hide colour key"
[351937d]2572msgstr "&skryť popis farieb"
[399807d8]2573
[a665282]2574#. TRANSLATORS: degree symbol - probably should be translated to
2575#. itself.
[a720caa]2576#: ../src/gfxcore.cc:693
2577#: ../src/gfxcore.cc:768
[31f1db0]2578#: ../src/mainfrm.cc:2136
2579#: ../src/mainfrm.cc:2262
2580#: ../src/printwx.cc:1001
[a7d4233]2581#: ../src/printwx.cc:1029
2582#: ../src/printwx.cc:1033
[31f1db0]2583#: ../src/printwx.cc:1037
2584#: ../src/printwx.cc:1047
[4a78370]2585#: n:344
[399807d8]2586msgid "°"
2587msgstr "°"
2588
[a665282]2589#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2590#. circle).
[a720caa]2591#: ../src/gfxcore.cc:698
2592#: ../src/gfxcore.cc:773
[d171c0c]2593#: n:76
2594msgid "ᵍ"
[0bb6bef]2595msgstr "ᵍ"
[d171c0c]2596
[a665282]2597#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2598#. full circle).  Try to make this as short as sensibly possible.
[63a4d47]2599#.
2600#. E.g. in Italian and Spanish we use "g.cent." rather than
2601#. "gradi quattrocentesimali"/"grados centesimales"
[31f1db0]2602#: ../src/mainfrm.cc:2144
2603#: ../src/mainfrm.cc:2265
[4a78370]2604#: n:345
[d86459c]2605msgid "grad"
2606msgstr "grády"
2607
[11f3c9a]2608#. TRANSLATORS: symbol for percentage gradient (100% = 45
2609#. degrees = 50 grad).
[a720caa]2610#: ../src/gfxcore.cc:759
2611#: ../src/gfxcore.cc:777
[d171c0c]2612#: n:96
2613msgid "%"
[0bb6bef]2614msgstr "%"
[d171c0c]2615
[a7d4233]2616#. TRANSLATORS: infinity symbol - used for the percentage gradient on
[11f3c9a]2617#. vertical angles.
[a720caa]2618#: ../src/gfxcore.cc:753
[d171c0c]2619#: n:431
2620msgid "∞"
[0bb6bef]2621msgstr "∞"
[d171c0c]2622
[31f1db0]2623#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2624#. in Compass bearing)
2625#: ../src/mainfrm.cc:2156
2626#: n:374
2627#, c-format
2628msgid "%s: H %.2f%s, Brg %03d%s"
2629msgstr "%s: H %.2f%s, Azim %03d%s"
[d86459c]2630
[31f1db0]2631#. TRANSLATORS: "V" is short for "Vertical"
2632#: ../src/mainfrm.cc:2189
2633#: n:375
2634#, c-format
2635msgid "%s: V %.2f%s"
2636msgstr "%s: V %.2f%s"
[d86459c]2637
[31f1db0]2638#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2639#. tree hierarchy of survey station names
2640#: ../src/mainfrm.cc:1079
2641#: n:376
2642msgid "Surveys"
2643msgstr "Merania"
[d86459c]2644
[31f1db0]2645#: ../src/mainfrm.cc:1080
2646#: n:377
2647msgid "Presentation"
2648msgstr "Zobrazenie"
[d86459c]2649
[31f1db0]2650#: ../src/mainfrm.cc:248
2651#: n:378
2652msgid "Easting"
2653msgstr "východ"
[d86459c]2654
[31f1db0]2655#: ../src/mainfrm.cc:249
[4a78370]2656#: n:379
[d86459c]2657msgid "Northing"
2658msgstr "sever"
2659
[31f1db0]2660#: ../src/mainfrm.cc:798
[4a78370]2661#: n:380
[d86459c]2662msgid "&Print…\tCtrl+P"
2663msgstr "&Tlačiť…\tCtrl+P"
2664
[31f1db0]2665#: ../src/mainfrm.cc:799
[4a78370]2666#: n:381
[d86459c]2667msgid "P&age Setup…"
2668msgstr "&Nastavení tisku…"
2669
[31f1db0]2670#: ../src/mainfrm.cc:803
[4a78370]2671#: n:382
[d86459c]2672msgid "&Export as…"
2673msgstr "&Export ako…"
2674
[a665282]2675#. TRANSLATORS: Title of file dialog to choose name and type of exported
2676#. file.
[31f1db0]2677#: ../src/printwx.cc:635
[4a78370]2678#: n:401
[1c6c300]2679msgid "Export as:"
[351937d]2680msgstr "Exportuj ako:"
[1c6c300]2681
[a665282]2682#. TRANSLATORS: Title of the export
2683#. dialog
[31f1db0]2684#: ../src/printwx.cc:312
[4a78370]2685#: n:383
[d86459c]2686msgid "Export"
2687msgstr "Export"
2688
2689#. TRANSLATORS: for about box:
[a7d4233]2690#: ../src/aboutdlg.cc:149
[4a78370]2691#: n:390
[d86459c]2692msgid "System Information:"
2693msgstr "Informácie o systéme:"
2694
2695#. TRANSLATORS: Title of the print preview dialog
[31f1db0]2696#: ../src/printwx.cc:672
[4a78370]2697#: n:398
[d86459c]2698msgid "Print Preview"
2699msgstr "Náhľad tlače"
2700
[a665282]2701#. TRANSLATORS: Title of the print
2702#. dialog
[31f1db0]2703#: ../src/printwx.cc:309
[4a78370]2704#: n:399
[d86459c]2705msgid "Print"
2706msgstr "Tlačiť"
2707
[31f1db0]2708#: ../src/printwx.cc:583
[4a78370]2709#: n:400
[de8488a6]2710msgid "&Print…"
2711msgstr "&Tlačiť…"
[d86459c]2712
[97d5744]2713#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2714#. "survey stations".
[31f1db0]2715#: ../src/printwx.cc:470
[4a78370]2716#: n:403
[d86459c]2717msgid "Sur&face Survey Legs"
2718msgstr "Zámery &na povrchu"
2719
[1c6c300]2720#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
[31f1db0]2721#: ../src/mainfrm.cc:135
[4a78370]2722#: n:404
[1c6c300]2723msgid "Edit Waypoint"
[351937d]2724msgstr "Zmeniť miesto pohľadu"
[1c6c300]2725
[a665282]2726#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2727#. in a presentation.
[31f1db0]2728#: ../src/mainfrm.cc:174
[4a78370]2729#: n:278
[1c6c300]2730msgid " (unused in perspective view)"
[351937d]2731msgstr " (nepoužíva sa v perspektívnom zobrazení)"
[1c6c300]2732
[a665282]2733#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2734#. presentation.
[31f1db0]2735#: ../src/mainfrm.cc:181
[4a78370]2736#: n:279
[1c6c300]2737msgid "Time: "
[7196714]2738msgstr "Čas: "
[1c6c300]2739
[a665282]2740#. TRANSLATORS: units+info after time field in dialog to edit a
2741#. waypoint in a presentation.
[31f1db0]2742#: ../src/mainfrm.cc:185
[4a78370]2743#: n:282
[1c6c300]2744msgid " secs (0 = auto; *6 = 6 times auto)"
[351937d]2745msgstr " sekundy (0 = auto; *6 = 6 krát auto)"
[d86459c]2746
[a665282]2747#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2748#. perhaps by "Survex" or other things in future).
2749#: ../src/aven.cc:230
[4a78370]2750#: n:405
[b1afaf6]2751#, c-format
[ee7511a]2752msgid "This version of %s requires OpenGL to work, but it isn’t available."
[b1afaf6]2753msgstr "Verzia %s vyžaduje funkčné OpenGL, ale to nie je dostupné."
[d86459c]2754
2755#. TRANSLATORS: for diffpos:
[a665282]2756#: ../src/diffpos.c:159
[4a78370]2757#: n:500
[d86459c]2758#, c-format
2759msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2760msgstr "Posun (%3.2f,%3.2f,%3.2f): %s"
2761
2762#. TRANSLATORS: for diffpos:
[a665282]2763#: ../src/diffpos.c:196
[4a78370]2764#: n:501
[d86459c]2765#, c-format
2766msgid "Added: %s"
2767msgstr "Pridané: %s"
2768
2769#. TRANSLATORS: for diffpos:
[a665282]2770#: ../src/diffpos.c:219
[4a78370]2771#: n:502
[d86459c]2772#, c-format
2773msgid "Deleted: %s"
2774msgstr "Zrušené: %s"
2775
[a665282]2776#. TRANSLATORS: for extend: the user specified breaking a loop or
2777#. changing extend direction at this station, but we didn’t find it in
2778#. the 3d file
[a7d4233]2779#: ../src/extend.c:263
2780#: ../src/extend.c:281
2781#: ../src/extend.c:326
2782#: ../src/extend.c:368
2783#: ../src/extend.c:410
[4a78370]2784#: n:510
[d86459c]2785#, c-format
2786msgid "Failed to find station %s"
2787msgstr "Nepodarilo sa nájsť bod %s"
2788
[a665282]2789#. TRANSLATORS: for extend: the user specified breaking a loop or
2790#. changing extend direction at this leg, but we didn’t find it in the
2791#. 3d file
[a7d4233]2792#: ../src/extend.c:307
2793#: ../src/extend.c:349
2794#: ../src/extend.c:391
2795#: ../src/extend.c:433
[4a78370]2796#: n:511
[d86459c]2797#, c-format
2798msgid "Failed to find leg %s → %s"
2799msgstr "Nepodarilo sa nájsť zámeru %s → %s"
2800
[a665282]2801#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
[a7d4233]2802#: ../src/extend.c:254
[4a78370]2803#: n:512
[d86459c]2804#, c-format
2805msgid "Starting from station %s"
2806msgstr "Začať od bodu %s"
2807
2808#. TRANSLATORS: for extend:
[a7d4233]2809#: ../src/extend.c:274
[4a78370]2810#: n:513
[d86459c]2811#, c-format
2812msgid "Extending to the left from station %s"
2813msgstr "Rozvinutý rez vľavo od bodu %s"
2814
2815#. TRANSLATORS: for extend:
[a7d4233]2816#: ../src/extend.c:319
[4a78370]2817#: n:514
[d86459c]2818#, c-format
2819msgid "Extending to the right from station %s"
2820msgstr "Rozvinutý rez vpravo od bodu %s"
2821
2822#. TRANSLATORS: for extend:
[a7d4233]2823#: ../src/extend.c:294
[4a78370]2824#: n:515
[d86459c]2825#, c-format
2826msgid "Extending to the left from leg %s → %s"
2827msgstr "Rozvinutý rez vľavo od zámery %s → %s"
2828
2829#. TRANSLATORS: for extend:
[a7d4233]2830#: ../src/extend.c:339
[4a78370]2831#: n:516
[d86459c]2832#, c-format
2833msgid "Extending to the right from leg %s → %s"
2834msgstr "Rozvinutý rez vpravo od zámery %s → %s"
2835
2836#. TRANSLATORS: for extend:
[a7d4233]2837#: ../src/extend.c:403
[4a78370]2838#: n:517
[d86459c]2839#, c-format
2840msgid "Breaking survey loop at station %s"
2841msgstr "Prerušený okruh na bode %s"
2842
2843#. TRANSLATORS: for extend:
[a7d4233]2844#: ../src/extend.c:423
[4a78370]2845#: n:518
[d86459c]2846#, c-format
2847msgid "Breaking survey loop at leg %s → %s"
2848msgstr "Prerušený okruh v zámere %s → %s"
2849
2850#. TRANSLATORS: for extend:
[a7d4233]2851#: ../src/extend.c:361
[4a78370]2852#: n:519
[d86459c]2853#, c-format
2854msgid "Swapping extend direction from station %s"
2855msgstr "Zrkadlový smer rozvinutého rezu od bodu %s"
2856
2857#. TRANSLATORS: for extend:
[a7d4233]2858#: ../src/extend.c:381
[4a78370]2859#: n:520
[d86459c]2860#, c-format
2861msgid "Swapping extend direction from leg %s → %s"
2862msgstr "Zrkadlový smer rozvinutého rezu od zámery %s → %s"
2863
2864#. TRANSLATORS: for extend:
[a7d4233]2865#: ../src/extend.c:551
[4a78370]2866#: n:521
[d86459c]2867#, c-format
[0804fbe]2868msgid "Applying specfile: “%s”"
2869msgstr "Použiť nastavenie zo súboru: “%s”"
[d86459c]2870
2871#. TRANSLATORS: for extend:
2872#. Used to tell the user that a file is being written - %s is the filename
[a7d4233]2873#: ../src/extend.c:614
[4a78370]2874#: n:522
[d86459c]2875#, c-format
2876msgid "Writing %s…"
2877msgstr "Zapisuje sa súbor %s…"
[571547c]2878
2879#: ../src/findentrances.cc:100
[f8c981b]2880#: ../src/gpx.cc:70
[aa430ec]2881#: ../src/kml.cc:69
[4a78370]2882#: n:287
[571547c]2883#, c-format
2884msgid "Failed to initialise input coordinate system “%s”"
[b1afaf6]2885msgstr "Zlyhal pokus o inicializáciu vstupného súradnicového systému “%s”"
[571547c]2886
2887#: ../src/findentrances.cc:103
[11f3c9a]2888#: ../src/gpx.cc:75
[aa430ec]2889#: ../src/kml.cc:74
[4a78370]2890#: n:288
[571547c]2891#, c-format
2892msgid "Failed to initialise output coordinate system “%s”"
[b1afaf6]2893msgstr "Zlyhal pokus o inicializáciu výstupného súradnicového systému “%s”"
[571547c]2894
[11f3c9a]2895#: ../src/findentrances.cc:158
[4a78370]2896#: n:388
[571547c]2897msgid "-d PROJ_DATUM 3D_FILE"
[b1afaf6]2898msgstr "-d PROJ_DÁTUM 3D_SÚBOR"
[571547c]2899
[a665282]2900#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2901#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
2902#. what the input datum is.
[11f3c9a]2903#: ../src/findentrances.cc:149
[4a78370]2904#: n:389
[571547c]2905msgid "input datum as string to pass to PROJ"
[b1afaf6]2906msgstr "Vložiť dátum ako text pre PROJ"
[97d5744]2907
[11f3c9a]2908#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2909#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
2910#. of the coordinate projection in use, the user must specify it here for
2911#. export formats which need to know it (e.g. GPX).
[31f1db0]2912#: ../src/printwx.cc:544
[11f3c9a]2913#: n:440
2914msgid "Coordinate projection"
2915msgstr ""
2916
[a7d4233]2917#: ../src/readval.c:341
[97d5744]2918#: n:392
2919msgid "Separator in survey name"
2920msgstr ""
[82ae44a]2921
[a720caa]2922#. TRANSLATORS: Used in place of the station name when talking about an
2923#. anonymous station.
[31f1db0]2924#: ../src/labelinfo.h:82
[a720caa]2925#: n:56
2926msgid "anonymous station"
2927msgstr ""
2928
[9e5ad92]2929#: ../src/readval.c:124
2930#: ../src/readval.c:139
2931#: ../src/readval.c:156
[82ae44a]2932#: n:3
2933msgid "Can't have a leg between two anonymous stations"
2934msgstr ""
2935
[a665282]2936#: ../src/dump3d.c:52
[82ae44a]2937#: n:396
2938msgid "show survey date information (if present)"
2939msgstr ""
2940
[31f1db0]2941#: ../src/mainfrm.cc:901
[82ae44a]2942#: n:406
2943#, fuzzy
2944msgid "Spla&y Legs"
2945msgstr "Splay Legs (&z)"
2946
[31f1db0]2947#: ../src/mainfrm.cc:898
[82ae44a]2948#: n:407
2949msgid "&Hide"
[6073761]2950msgstr "&Skryť"
[82ae44a]2951
[31f1db0]2952#: ../src/mainfrm.cc:899
[82ae44a]2953#: n:408
2954msgid "&Fade"
2955msgstr ""
2956
[31f1db0]2957#: ../src/mainfrm.cc:900
[82ae44a]2958#: n:409
2959msgid "&Show"
[6073761]2960msgstr "&Zobraziť"
[583c17d]2961
[31f1db0]2962#: ../src/cad3d.c:661
2963#: n:100
2964msgid "do not generate station markers"
2965msgstr "negenerovať symboly bodov"
2966
2967#: ../src/cad3d.c:662
2968#: n:101
2969msgid "do not generate station labels"
2970msgstr "negenerovať popisky bodov"
2971
2972#: ../src/cad3d.c:663
2973#: n:102
2974msgid "do not generate survey legs"
2975msgstr "negenerovať zámery"
2976
2977#: ../src/cad3d.c:667
2978#: n:103
2979msgid "produce an elevation view"
2980msgstr "vytvoriť bočný pohľad"
2981
2982#: ../src/cad3d.c:664
2983#: n:148
2984#, c-format
2985msgid "generate grid (default %sm)"
2986msgstr "generovať sieť (defaultne %sm)"
2987
2988#: ../src/cad3d.c:665
2989#: n:149
2990#, c-format
2991msgid "station labels text height (default %s)"
2992msgstr "veľkosť textu pre popisky bodov (defaultne %sm)"
2993
2994#: ../src/cad3d.c:666
2995#: n:152
2996#, c-format
2997msgid "station marker size (default %s)"
2998msgstr "veľkosť symbolu bodu (defaultne %sm)"
2999
3000#: ../src/cad3d.c:668
3001#: n:155
3002#, c-format
3003msgid "factor to scale down by (default %s)"
3004msgstr "koeficient pre zmenšenie o (defaultne %sm)"
3005
3006#: ../src/cad3d.c:669
3007#: n:156
3008msgid "produce DXF output"
3009msgstr "vygenerovať formát DXF"
3010
3011#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
3012#. translated.
3013#: ../src/cad3d.c:672
3014#: n:158
3015msgid "produce Skencil output"
3016msgstr "vygenerovať formát Skencil"
3017
3018#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
3019#. so should not be translated.
3020#: ../src/cad3d.c:675
3021#: n:159
3022msgid "produce Compass PLT output for Carto"
3023msgstr "vygenerovať formát Compass PLT pre Carto"
3024
3025#: ../src/cad3d.c:676
3026#: n:160
3027msgid "produce SVG output"
3028msgstr "vygenerovať formát SVG"
3029
3030#, c-format
3031#~ msgid "Error in format of font file “%s”"
3032#~ msgstr "Chyba vo formáte fontu “%s”"
3033
3034#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
3035#. height values).
3036#~ msgid "Select a terrain file to view"
3037#~ msgstr "Vyber súbor s povrchom k zobrazeniu"
3038
3039#~ msgid "Terrain files"
3040#~ msgstr "Súbory s povrchom"
3041
3042#~ msgid "Open &Terrain…"
3043#~ msgstr "Otvoriť digitálny model &terénu…"
3044
3045#~ msgid "Solid Su&rface"
3046#~ msgstr "Neprie&hľadný povrch"
3047
3048#. TRANSLATORS: number of stations found matching search
3049#, c-format
3050#~ msgid "%d found"
3051#~ msgstr "%d nájdených"
3052
3053#: ../src/mainfrm.cc:939
3054#: n:347
3055#~ msgid "&Preferences…"
3056#~ msgstr "&Predvoľby…"
3057
3058#: n:348
3059#~ msgid "Draw passage walls"
3060#~ msgstr "Vykresliť steny priestorov"
3061
3062#: n:349
3063#~ msgid "Estimate LRUD readings based on heuristics"
3064#~ msgstr "Odhadnuté rozmery rezu na základe heuristiky"
3065
3066#: n:350
3067#~ msgid "Mark survey stations with crosses"
3068#~ msgstr "Vyznačiť meračské body krížikmi"
3069
3070#: n:351
3071#~ msgid "Highlight stations marked as entrances"
3072#~ msgstr "Zvýrazniť body označené ako vchody"
3073
3074#: n:352
3075#~ msgid "Highlight stations marked as fixed points"
3076#~ msgstr "Zvýrazniť body označené ako fixné body"
3077
3078#: n:353
3079#~ msgid "Highlight stations which are exported"
3080#~ msgstr "Zvýrazniť vyexportované body"
3081
3082#: n:354
3083#~ msgid "Mark survey stations with their names"
3084#~ msgstr "Doplniť body ich názvami"
3085
3086#: n:355
3087#~ msgid "Allow names to overlap on the display (faster)"
3088#~ msgstr "Povoliť prekrývanie názvov na obrazovke (rýchlejšie)"
3089
3090#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3091#. "survey stations".
3092#: n:357
3093#~ msgid "Display underground survey legs"
3094#~ msgstr "Zobraziť podzemné zámery"
3095
3096#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3097#. "survey stations".
3098#: n:358
3099#~ msgid "Display surface survey legs"
3100#~ msgstr "Zobraziť povrchové zámery"
3101
3102#: n:359
3103#~ msgid "Colour surface surveys by depth"
3104#~ msgstr "Zafarbiť povrchové zámery podľa výšky"
3105
3106#: n:360
3107#~ msgid "Draw surface legs with dashed lines"
3108#~ msgstr "Zobraziť povrchové zámery čiarkovano"
3109
3110#: n:361
3111#~ msgid "Draw a grid"
3112#~ msgstr "Zobraziť sieť"
3113
3114#: n:362
3115#~ msgid "metric units"
3116#~ msgstr "metrických jednotkách"
3117
3118#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
3119#. the USA (rather confusingly now that England has largely gone metric!)
3120#: n:363
3121#~ msgid "imperial units"
3122#~ msgstr "anglosaských jednotkách"
3123
3124#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
3125#. full circle.
3126#: n:364
3127#~ msgid "degrees (°)"
3128#~ msgstr "stupňoch (°)"
3129
3130#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
3131#. full circle.
3132#: n:365
3133#~ msgid "grads"
3134#~ msgstr "grádoch"
3135
3136#: n:366
3137#~ msgid "Display measurements in"
3138#~ msgstr "Zobraziť dļžky v"
3139
3140#: n:367
3141#~ msgid "Display angles in"
3142#~ msgstr "Zobraziť uhly v"
3143
3144#. TRANSLATORS: reverses the sense of the mouse controls
3145#: n:368
3146#~ msgid "Reverse the sense of the controls"
3147#~ msgstr "Obrátiť zmysel kontroly"
3148
3149#: n:369
3150#~ msgid "Display scale bar"
3151#~ msgstr "Zobraziť mierku"
3152
3153#: n:370
3154#~ msgid "Display depth bar"
3155#~ msgstr "Zobraziť hļbkovú škálu"
3156
3157#: n:371
3158#~ msgid "Display compass"
3159#~ msgstr "Zobraziť kompas"
3160
3161#: n:372
3162#~ msgid "Display clinometer"
3163#~ msgstr "Zobraziť sklon"
3164
3165#: n:373
3166#~ msgid "Display side panel"
3167#~ msgstr "Zobraziť bočný panel"
Note: See TracBrowser for help on using the repository browser.