source: git/lib/ru.po @ 4b5971f

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data
Last change on this file since 4b5971f was 4b5971f, checked in by Olly Betts <olly@…>, 9 years ago

lib/: Add translations for "error" based on existing translations.

  • Property mode set to 100644
File size: 81.3 KB
RevLine 
[859d2937]1msgid ""
2msgstr ""
3"Project-Id-Version: survex\n"
4"Report-Msgid-Bugs-To: olly@survex.com\n"
5"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
[2afde70]7"Last-Translator: vsuhachev <vsuhachev@yandex.ru>\n"
[859d2937]8"Language-Team: \n"
9"MIME-Version: 1.0\n"
10"Content-Type: text/plain; charset=utf-8\n"
11"Content-Transfer-Encoding: 8bit\n"
12"Language: ru\n"
13
[a665282]14#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
15#. was trying to allocate space for.
16#: ../src/message.c:85
[859d2937]17#: n:1
18#, c-format
19msgid "Out of memory (couldn’t find %lu bytes)."
[2afde70]20msgstr "Недостаточно памяти (невозможно выделить %lu байт)."
[859d2937]21
[31f1db0]22#. TRANSLATORS: %s will be replaced by the filename that we were trying
23#. to read when we ran out of memory.
24#: ../src/img_hosted.c:34
25#: n:38
26#, fuzzy, c-format
27msgid "Out of memory trying to read file “%s”"
28msgstr "Недостаточно памяти: “%s”"
29
[a665282]30#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
31#. greater" if that gives a more natural translation.  It's
32#. technically not quite right when there are parallel active release
33#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
[a7d4233]34#. seems unlikely to confuse users.  "Survex" is the name of the
35#. software, so should not be translated.
36#.
37#. Here "survey" is a "cave map" rather than list of questions - it should be
38#. translated to the terminology that cavers using the language would use.
39#: ../src/commands.c:2022
[859d2937]40#: n:2
41#, c-format
42msgid "Survex version %s or greater required to process this survey data."
[2afde70]43msgstr "Для обработки данных этой топо-съемки требуется Survex версии %s и старше."
[859d2937]44
45#. TRANSLATORS: Indicates a warning message e.g.:
46#. "spoon.svx:12: warning: *prefix is deprecated"
[a7d4233]47#: ../src/aven.cc:397
[31f1db0]48#: ../src/cavernlog.cc:242
49#: ../src/message.c:1255
[859d2937]50#: n:4
51msgid "warning"
52msgstr "предупреждение"
53
[31f1db0]54#. TRANSLATORS: Indicates an error message e.g.:
55#. "spoon.svx:13:4: error: Field may not be omitted"
56#: ../src/cavernlog.cc:241
57#: ../src/message.c:1259
58#: n:93
59msgid "error"
[4b5971f]60msgstr "ошибка"
[31f1db0]61
[a665282]62#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
[a7d4233]63#. by the line number in that file.  Your translation should also contain
64#. %s:%u so that automatic parsing of error messages to determine the file
65#. and line number still works.
66#: ../src/datain.c:109
[859d2937]67#: n:5
68#, c-format
69msgid "In file included from %s:%u:\n"
70msgstr ""
71
72#. TRANSLATORS: If you're unsure what "deprecated" means, see:
73#. http://en.wikipedia.org/wiki/Deprecation
[dfc141d]74#: ../src/commands.c:560
[859d2937]75#: n:6
76msgid "*prefix is deprecated - use *begin and *end instead"
[2afde70]77msgstr "*prefix устарел - используйте *begin и *end вместо него"
[859d2937]78
79#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a665282]80#: ../src/readval.c:206
[859d2937]81#: n:7
82#, c-format
83msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
[2afde70]84msgstr "Символ “%c” недопустим в имени пикета (используйте *SET NAMES для определения допустимых символов)"
[859d2937]85
[a7d4233]86#: ../src/readval.c:387
[859d2937]87#: n:8
88msgid "Field may not be omitted"
[2afde70]89msgstr "Поле не может быть пропущено"
[859d2937]90
[a7d4233]91#: ../src/datain.c:1530
92#: ../src/datain.c:1816
93#: ../src/readval.c:389
94#: ../src/readval.c:430
95#: ../src/readval.c:460
[859d2937]96#: n:9
97#, c-format
98msgid "Expecting numeric field, found “%s”"
99msgstr ""
100
[a7d4233]101#: ../src/commands.c:1620
[859d2937]102#: n:10
103#, c-format
104msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
[2afde70]105msgstr "Вместо “%s” ожидаются “PRESERVE”, “TOUPPER”, или “TOLOWER”"
[859d2937]106
107#: ../src/debug.h:45
108#: ../src/debug.h:47
109#: ../src/matrix.c:352
[a665282]110#: ../src/message.c:238
[859d2937]111#: n:11
112msgid "Bug in program detected! Please report this to the authors"
[2afde70]113msgstr "Обнаружена ошибка в программе! Пожалуйста сообщите о ней авторам"
[859d2937]114
[a7d4233]115#: ../src/commands.c:2137
116#: ../src/extend.c:436
[859d2937]117#: n:12
118#, c-format
119msgid "Unknown command “%s”"
[2afde70]120msgstr "Неизвестная комманда “%s”"
[859d2937]121
122#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a7d4233]123#: ../src/netbits.c:449
[859d2937]124#: n:13
125#, c-format
126msgid "Station “%s” equated to itself"
127msgstr ""
128
[a665282]129#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
130#. survey stations.
[a7d4233]131#: ../src/datain.c:1051
[859d2937]132#: n:14
133msgid "Compass reading may not be omitted except on plumbed legs"
134msgstr ""
135
[a7d4233]136#: ../src/datain.c:284
137#: ../src/extend.c:441
[859d2937]138#: n:15
139msgid "End of line not blank"
140msgstr ""
141
[a720caa]142#: ../src/cavern.c:393
[859d2937]143#: n:16
144#, c-format
145msgid "There were %d warning(s)."
[2afde70]146msgstr "Получено %d предупреждений."
[859d2937]147
148#. TRANSLATORS: %s is replaced by the command we attempted to run.
[a665282]149#: ../src/cavernlog.cc:175
150#: ../src/cavernlog.cc:233
[859d2937]151#: n:17
152#, c-format
153msgid "Couldn’t run external command: “%s”"
[2afde70]154msgstr "Невозможно выполнить внешнюю команду: “%s”"
[859d2937]155
156#: ../src/datain.c:80
157#: ../src/datain.c:88
158#: ../src/datain.c:95
[a7d4233]159#: ../src/datain.c:770
160#: ../src/extend.c:559
[a665282]161#: ../src/sorterr.c:80
162#: ../src/sorterr.c:97
163#: ../src/sorterr.c:240
[859d2937]164#: n:18
165msgid "Error reading file"
[0af9ff3]166msgstr "Ошибка при чтении файла"
[859d2937]167
[31f1db0]168#: ../src/message.c:1275
[859d2937]169#: n:19
170msgid "Too many errors - giving up"
[2afde70]171msgstr "Возникло слишком много ошибок - выполнение прервано"
[859d2937]172
173#. TRANSLATORS: If you're unsure what "deprecated" means, see:
174#. http://en.wikipedia.org/wiki/Deprecation
[a7d4233]175#: ../src/commands.c:1499
[859d2937]176#: n:20
177msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
[2afde70]178msgstr "*DEFAULT устарело - используйте *CALIBRATE/DATA/SD/UNITS с аргументом DEFAULT вместо него"
[859d2937]179
[a665282]180#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
181#. (a weight on a string).  So the problem here is that the leg is
182#. vertical, so a compass reading has no meaning!
[a7d4233]183#: ../src/datain.c:1022
[859d2937]184#: n:21
185msgid "Compass reading given on plumbed leg"
186msgstr ""
187
[dfc141d]188#: ../src/commands.c:648
[859d2937]189#: n:22
190msgid "END with no matching BEGIN in this file"
[2afde70]191msgstr "END без соответствующего BEGIN в этом файле"
[859d2937]192
[a7d4233]193#: ../src/datain.c:757
[859d2937]194#: n:23
195msgid "BEGIN with no matching END in this file"
[2afde70]196msgstr "BEGIN без соответствующего END в этом файле"
[859d2937]197
198#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
199#. deprecated, so this error would be generated by:
200#.
201#. *equate \foo.7 1
202#.
203#. If you're unsure what "deprecated" means, see:
204#. http://en.wikipedia.org/wiki/Deprecation
[11f3c9a]205#: ../src/commands.c:463
[859d2937]206#: ../src/readval.c:90
207#: ../src/readval.c:94
208#: n:25
209msgid "ROOT is deprecated"
210msgstr ""
211
[a665282]212#. TRANSLATORS: A station must be exported out of each level it is in, so
213#. this would give "Station “\outer.inner.1” not exported from survey
214#. “\outer”)":
215#.
[859d2937]216#. *equate entrance outer.inner.1
217#. *begin outer
218#. *begin inner
219#. *export 1
220#. 1 2 1.23 045 -6
221#. *end inner
222#. *end outer
[a7d4233]223#.
224#. Here "survey" is a "cave map" rather than list of questions - it should be
225#. translated to the terminology that cavers using the language would use.
226#: ../src/commands.c:964
227#: ../src/commands.c:966
[dfc141d]228#: ../src/listpos.c:104
[a7d4233]229#: ../src/readval.c:328
230#: ../src/readval.c:331
[859d2937]231#: n:26
232#, c-format
233msgid "Station “%s” not exported from survey “%s”"
234msgstr ""
235
[a665282]236#. TRANSLATORS: This error occurs if there's an attempt to
237#. export a station from a survey which doesn't actually exist.
[a7d4233]238#.
239#. Here "survey" is a "cave map" rather than list of questions - it should be
240#. translated to the terminology that cavers using the language would use.
241#: ../src/listpos.c:112
[859d2937]242#: n:286
243#, c-format
244msgid "Reference to station “%s” from non-existent survey “%s”"
245msgstr ""
246
[a7d4233]247#. TRANSLATORS: Here "station" is a survey station, not a train station.
248#.
249#. Here "survey" is a "cave map" rather than list of questions - it should be
250#. translated to the terminology that cavers using the language would use.
251#: ../src/readval.c:302
[859d2937]252#: n:27
253#, c-format
254msgid "“%s” can’t be both a station and a survey"
[2afde70]255msgstr "“%s” не может быть одновременно именем пикета и топо-съемки"
[859d2937]256
[a7d4233]257#. TRANSLATORS: Here "station" is a survey station, not a train station.
258#: ../src/extend.c:248
259#: ../src/extend.c:267
260#: ../src/extend.c:312
261#: ../src/extend.c:354
262#: ../src/extend.c:396
[859d2937]263#: ../src/readval.c:202
264#: n:28
265msgid "Expecting station name"
[2afde70]266msgstr "Ожидается имя пикета"
[859d2937]267
[eb9a1e3]268#. TRANSLATORS: e.g.
269#.
270#. *begin crawl
271#. 1 2 9.45 234 -01
272#. *end crawl
273#. *begin crawl    # <- warning here
274#. 2 3 7.67 223 -03
275#. *end crawl
[859d2937]276#.
277#. If you're unsure what "deprecated" means, see:
278#. http://en.wikipedia.org/wiki/Deprecation
[dfc141d]279#: ../src/commands.c:537
[859d2937]280#: n:29
[eb9a1e3]281msgid "Reentering an existing survey is deprecated"
[859d2937]282msgstr ""
283
[dfc141d]284#: ../src/commands.c:538
[859d2937]285#: n:30
286msgid "Originally entered here"
287msgstr ""
288
[a7d4233]289#: ../src/commands.c:1948
[859d2937]290#: n:31
291#, c-format
292msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
[2afde70]293msgstr "Вместо “%s” ожидаются “EQUATES”, “EXPORTS” или “PLUMBS”"
[859d2937]294
[a7d4233]295#: ../src/commands.c:1955
[859d2937]296#: n:32
297#, c-format
298msgid "Found “%s”, expecting “ON” or “OFF”"
[2afde70]299msgstr "Вместо “%s” ожидаются “ON” или “OFF”"
[859d2937]300
[a665282]301#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
302#. translated.
[a7d4233]303#.
304#. Here "station" is a survey station, not a train station.
305#: ../src/commands.c:924
[859d2937]306#: n:33
307msgid "Only one station in EQUATE command"
[2afde70]308msgstr "Указано только одно имя пикета в команде EQUATE"
[859d2937]309
[11f3c9a]310#: ../src/commands.c:410
[859d2937]311#: n:34
312#, c-format
313msgid "Unknown quantity “%s”"
314msgstr ""
315
[11f3c9a]316#: ../src/commands.c:327
[859d2937]317#: n:35
318#, c-format
319msgid "Unknown units “%s”"
[2afde70]320msgstr "Неизвестная единица измерения “%s”"
[859d2937]321
[a7d4233]322#: ../src/commands.c:1788
323#: ../src/commands.c:1863
[11f3c9a]324#: n:434
325msgid "Unknown coordinate system"
[2afde70]326msgstr "Неизвестная система координат"
[11f3c9a]327
[a7d4233]328#: ../src/commands.c:1883
329#: ../src/commands.c:1908
[aa430ec]330#: n:443
331#, c-format
332msgid "Invalid coordinate system: %s"
[2afde70]333msgstr "Недопустимая система координат: %s"
[aa430ec]334
[a7d4233]335#: ../src/commands.c:1870
336#: ../src/commands.c:1888
[11f3c9a]337#: n:435
338msgid "Coordinate system unsuitable for output"
[2afde70]339msgstr "Система координат не подходит для вывода результатов"
[11f3c9a]340
[dfc141d]341#: ../src/commands.c:824
[11f3c9a]342#: n:436
343msgid "Failed to convert coordinates"
[2afde70]344msgstr "Неудача при переводе координат"
[11f3c9a]345
[dfc141d]346#: ../src/commands.c:829
[11f3c9a]347#: n:437
[29d1883]348msgid "The input projection is set but the output projection isn't"
[2afde70]349msgstr "Исходная проекция задана, а результирующая нет"
[11f3c9a]350
[dfc141d]351#: ../src/commands.c:831
[11f3c9a]352#: n:438
[29d1883]353msgid "The output projection is set but the input projection isn't"
[2afde70]354msgstr "Результирующая проекция задана, а исходная нет"
[11f3c9a]355
[29d1883]356#: ../src/commands.c:731
[11f3c9a]357#: n:439
358msgid "Coordinates can't be omitted when coordinate system has been specified"
[2afde70]359msgstr "Координаты не могут быть пропущены если указана система координат"
[11f3c9a]360
[613028c]361#. TRANSLATORS: Used when a BEGIN command has no survey, but the
362#. END command does, e.g.:
[a665282]363#.
[859d2937]364#. *begin
365#. 1 2 10.00 178 -01
366#. *end entrance      <--[Message given here]
[dfc141d]367#: ../src/commands.c:670
[859d2937]368#: n:36
[613028c]369msgid "Matching BEGIN command has no survey name"
[2afde70]370msgstr "Для соответствующей команды BEGIN не указано имя топо-съемки"
[859d2937]371
[a665282]372#. TRANSLATORS: Note: In English you talk about the *units* of a single
373#. measurement, but the correct term in other languages may be singular.
[11f3c9a]374#: ../src/commands.c:340
[859d2937]375#: n:37
376#, c-format
377msgid "Invalid units “%s” for quantity"
[2afde70]378msgstr "Недрпустимая единица измерения “%s” для значения"
[859d2937]379
[11f3c9a]380#: ../src/commands.c:403
[859d2937]381#: n:39
382#, c-format
383msgid "Unknown instrument “%s”"
[2afde70]384msgstr "Неизвестный инструмент “%s”"
[859d2937]385
[a665282]386#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
387#. translate
[a7d4233]388#: ../src/commands.c:1467
[859d2937]389#: n:40
390msgid "Scale factor must be 1.0 for DECLINATION"
[2afde70]391msgstr "Масштабный коэффициент должен равняться 1.0 для DECLINATION"
[859d2937]392
[a665282]393#. TRANSLATORS: If the scale factor for an instrument is zero, then any
394#. reading would be mapped to zero, which doesn't make sense.
[a7d4233]395#: ../src/commands.c:1473
[859d2937]396#: n:391
397msgid "Scale factor must be non-zero"
[2afde70]398msgstr "Масштабный коэффициент должен быть ненулевым"
[859d2937]399
[a7d4233]400#: ../src/commands.c:1518
[859d2937]401#: n:41
402#, c-format
403msgid "Unknown setting “%s”"
[2afde70]404msgstr "Неизвестная настройка “%s”"
[859d2937]405
[11f3c9a]406#: ../src/commands.c:448
[859d2937]407#: n:42
408#, c-format
409msgid "Unknown character class “%s”"
[2afde70]410msgstr "Неизвестный класс символов “%s”"
[859d2937]411
[a7d4233]412#: ../src/extend.c:605
[859d2937]413#: ../src/netskel.c:90
414#: n:43
415msgid "No survey data"
[2afde70]416msgstr "Нет данных топо-съемки"
[859d2937]417
418#: ../src/filename.c:52
[31f1db0]419#: ../src/img_hosted.c:35
[859d2937]420#: n:44
421#, c-format
422msgid "Filename “%s” refers to directory"
[2afde70]423msgstr "Имя файла “%s” ссылается на каталог файловой системы"
[859d2937]424
425#: ../src/netartic.c:384
426#: n:45
427msgid "Survey not all connected to fixed stations"
428msgstr ""
429
[29d1883]430#: ../src/commands.c:854
[a7d4233]431#: ../src/datain.c:682
[859d2937]432#: n:46
433msgid "Station already fixed or equated to a fixed point"
434msgstr ""
435
[11f3c9a]436#: ../src/cavern.c:298
[859d2937]437#: ../src/filename.c:55
[31f1db0]438#: ../src/img_hosted.c:36
[859d2937]439#: n:47
440#, c-format
441msgid "Failed to open output file “%s”"
[2afde70]442msgstr "Невозможно открыть выходной файл “%s”"
[859d2937]443
[a7d4233]444#: ../src/commands.c:1573
[859d2937]445#: n:48
446msgid "Standard deviation must be positive"
[2afde70]447msgstr "Стандартное отклонение должно быть положительным числом"
[859d2937]448
449#. TRANSLATORS: as in: Usage: cavern …
[a665282]450#: ../src/cmdline.c:168
[859d2937]451#: n:49
452msgid "Usage"
[0af9ff3]453msgstr "Использование"
[859d2937]454
455#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
456#. "survey stations".
457#.
458#. %s is replaced by the name of the station.
[a7d4233]459#: ../src/netbits.c:346
[859d2937]460#: n:50
461#, c-format
462msgid "Survey leg with same station (“%s”) at both ends - typing error?"
[2afde70]463msgstr "Замер с одинаковым именем пикета (“%s”) на обоих концах замера - опечатка?"
[859d2937]464
[a665282]465#. TRANSLATORS: Degrees are the angular measurement where there are
466#. 360 in a full circle.
[a7d4233]467#: ../src/datain.c:969
468#: ../src/datain.c:977
469#: ../src/datain.c:989
[859d2937]470#: n:51
471msgid "Clino reading over 90 degrees (absolute value)"
472msgstr ""
473
[a7d4233]474#: ../src/netbits.c:464
[859d2937]475#: n:52
476#, c-format
477msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
478msgstr ""
479
[a665282]480#. TRANSLATORS: "equal" as in:
481#.
482#. *fix a 1 2 3
483#. *fix b 1 2 3
484#. *equate a b
[a7d4233]485#: ../src/netbits.c:475
[859d2937]486#: n:53
487#, c-format
488msgid "Equating two equal fixed points: “%s” and “%s”"
489msgstr ""
490
491#. TRANSLATORS: " *fix a " gives this message:
[29d1883]492#: ../src/commands.c:741
[859d2937]493#: n:54
494msgid "FIX command with no coordinates - fixing at (0,0,0)"
[2afde70]495msgstr "Команда FIX без указания координат - выполнена фиксация с координатами (0,0,0)"
[859d2937]496
497#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
[29d1883]498#: ../src/commands.c:858
[a7d4233]499#: ../src/datain.c:684
[859d2937]500#: n:55
501msgid "Station already fixed at the same coordinates"
[2afde70]502msgstr "Пикет с таким именем уже зафиксирован с такими же координатами"
[859d2937]503
[dfc141d]504#. TRANSLATORS: Emitted after second and subsequent "FIX command with
505#. no coordinates - fixing at (0,0,0)" warnings.
[29d1883]506#: ../src/commands.c:749
[dfc141d]507#: n:441
508#, c-format
509msgid "Already had FIX command with no coordinates for station “%s”"
[2afde70]510msgstr "Повторное использование команды FIX без координат для пикета “%s”"
[dfc141d]511
[a7d4233]512#: ../src/commands.c:1673
[29d1883]513#: n:442
514#, c-format
515msgid "Station “%s” fixed before CS command first used"
516msgstr ""
517
[a665282]518#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
519#. <SURVEY>, so this would generate this error:
520#.
[859d2937]521#. *begin fred
522#. 1 2 1.23 045 -6
523#. *export 2
524#. *end fred
[a7d4233]525#: ../src/commands.c:2151
[859d2937]526#: n:57
527msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
528msgstr ""
529
[31f1db0]530#: ../src/readval.c:516
[859d2937]531#: n:58
[0af9ff3]532#, fuzzy
[859d2937]533msgid "Invalid year (< 1900 or > 2078)"
[0af9ff3]534msgstr "Введите год в промежутке от 1900 до 2078"
[859d2937]535
[a665282]536#. TRANSLATORS: Suspicious means something like 410 degrees or -20
537#. degrees
[a7d4233]538#: ../src/datain.c:867
539#: ../src/datain.c:876
[859d2937]540#: n:59
541msgid "Suspicious compass reading"
[2afde70]542msgstr "Подозрительное значение азимута"
[859d2937]543
[a7d4233]544#: ../src/datain.c:1506
[859d2937]545#: n:60
546msgid "Negative tape reading"
[2afde70]547msgstr "Отрицательное значение длинны замера"
[859d2937]548
[29d1883]549#: ../src/commands.c:736
[859d2937]550#: n:61
551msgid "Same station fixed twice with no coordinates"
[2afde70]552msgstr "Один и тот же пикет заыиксирован дважды без указания координат"
[859d2937]553
554#. TRANSLATORS: This means that the data fed in said this.
[a665282]555#.
556#. It could be a gross error (e.g. the decimal point is missing from the
557#. depth gauge reading) or it could just be due to random error on a near
558#. vertical leg
[a7d4233]559#: ../src/datain.c:1205
[859d2937]560#: n:62
561msgid "Tape reading is less than change in depth"
562msgstr ""
563
564#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
565#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
[a665282]566#. neither style nor reading is a keyword in the program This error
567#. complains about a depth gauge reading in normal style, for example
[a7d4233]568#: ../src/commands.c:1185
[859d2937]569#: n:63
570#, c-format
571msgid "Reading “%s” not allowed in data style “%s”"
572msgstr ""
573
574#. TRANSLATORS: i.e. not enough readings for the style.
[a7d4233]575#: ../src/commands.c:1370
[859d2937]576#: n:64
577#, c-format
578msgid "Too few readings for data style “%s”"
[2afde70]579msgstr "Недостаточно значений для стиля топо-данных “%s”"
[859d2937]580
581#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
[a7d4233]582#: ../src/commands.c:1145
[859d2937]583#: n:65
584#, c-format
585msgid "Data style “%s” unknown"
[2afde70]586msgstr "Неизвестный стиль топо-данных “%s”"
[859d2937]587
588#. TRANSLATORS: Here "station" is a survey station, not a train station.
589#.
[a665282]590#. Exporting a station twice gives this error:
591#.
[859d2937]592#. *begin example
593#. *export 1
594#. *export 1
595#. 1 2 1.24 045 -6
596#. *end example
[a7d4233]597#: ../src/commands.c:1015
[859d2937]598#: n:66
599#, c-format
600msgid "Station “%s” already exported"
[2afde70]601msgstr "Пикет с именем “%s” уже экспортирован"
[859d2937]602
[a665282]603#. TRANSLATORS: complains about a situation like trying to define
604#. two from stations per leg
[a7d4233]605#: ../src/commands.c:1211
[859d2937]606#: n:67
607#, c-format
608msgid "Duplicate reading “%s”"
609msgstr ""
610
[29d1883]611#: ../src/commands.c:885
[859d2937]612#: n:68
613#, c-format
614msgid "FLAG “%s” unknown"
[2afde70]615msgstr "FLAG “%s” - неизвестный флаг"
[859d2937]616
[a7d4233]617#: ../src/readval.c:474
[859d2937]618#: n:69
619msgid "Missing \""
[0af9ff3]620msgstr "Недостающие \""
[859d2937]621
622#. TRANSLATORS: Here "station" is a survey station, not a train station.
[a7d4233]623#: ../src/listpos.c:122
[859d2937]624#: n:70
625#, c-format
[ec3d624]626msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
[859d2937]627msgstr ""
628
[a665282]629#. TRANSLATORS: Here "station" is a survey station, not a train
630#. station.
631#: ../src/netartic.c:396
[859d2937]632#: n:71
633msgid "The following survey stations are not attached to a fixed point:"
634msgstr ""
635
[11f3c9a]636#: ../src/netskel.c:135
[859d2937]637#: n:72
638#, c-format
639msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
640msgstr ""
641
642#. TRANSLATORS: fixed survey station that is not part of any survey
[11f3c9a]643#: ../src/netskel.c:958
[859d2937]644#: n:73
645#, c-format
646msgid "Unused fixed point “%s”"
647msgstr ""
648
649#: ../src/matrix.c:123
650#: n:74
651msgid "Network solved by reduction - no simultaneous equations to solve."
652msgstr ""
653
654#: ../src/matrix.c:134
655#: n:75
656#, c-format
657msgid "Solving %d simultaneous equations"
658msgstr ""
659
[a7d4233]660#: ../src/commands.c:1273
[859d2937]661#: n:77
662#, c-format
663msgid "Reading “%s” duplicates previous reading(s)"
664msgstr ""
665
666#: ../src/matrix.c:132
667#: n:78
668msgid "Solving one equation"
669msgstr ""
670
[a7d4233]671#: ../src/datain.c:940
672#: ../src/datain.c:1194
673#: ../src/datain.c:1387
[859d2937]674#: n:79
675msgid "Negative adjusted tape reading"
676msgstr ""
677
[a7d4233]678#: ../src/commands.c:2059
679#: ../src/commands.c:2079
[859d2937]680#: n:80
681msgid "Date is in the future!"
682msgstr ""
683
[a7d4233]684#: ../src/commands.c:2083
[859d2937]685#: n:81
686msgid "End of date range is before the start"
687msgstr ""
688
689#: ../src/avenprcore.cc:125
690#: n:82
691#, c-format
692msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
[2afde70]693msgstr "Параметр “%s” имеет недопустимое значение “%s” в файле конфигурации принтера"
[859d2937]694
[a665282]695#. TRANSLATORS: e.g. the user specifies a passage cross-section at
696#. station "entrance.27", but there is no station "entrance.27" in
697#. the centre-line.
[11f3c9a]698#: ../src/netskel.c:1046
[859d2937]699#: n:83
700#, c-format
701msgid "Cross section specified at non-existent station “%s”"
702msgstr ""
703
[a665282]704#. TRANSLATORS: In data with backsights, the user has tried to give a
705#. plumb for the foresight and a clino reading for the backsight, or
706#. something similar.
[a7d4233]707#: ../src/datain.c:1006
708#: ../src/datain.c:1030
[859d2937]709#: n:84
710msgid "CLINO and BACKCLINO readings must be of the same type"
[2afde70]711msgstr "Значения CLINO и BACKCLINO должны иметь одинаковый тип"
[859d2937]712
713#: ../src/avenprcore.cc:120
714#: n:85
715#, c-format
716msgid "Parameter “%s” missing in printer configuration file"
[2afde70]717msgstr "Параметр “%s” отсутствует в файле конфигурации принтера"
[859d2937]718
[31f1db0]719#: ../src/readval.c:524
[859d2937]720#: n:86
721msgid "Invalid month"
[2afde70]722msgstr "Недопустимый месяц"
[859d2937]723
724#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
[31f1db0]725#: ../src/readval.c:533
[859d2937]726#: n:87
727msgid "Invalid day of the month"
[2afde70]728msgstr "Недопустимый день месяца"
[859d2937]729
[11f3c9a]730#: ../src/cavern.c:247
[859d2937]731#: n:88
732#, c-format
733msgid "3d file format versions %d to %d supported"
734msgstr ""
735
736#: ../src/readval.c:200
737#: n:89
738msgid "Expecting survey name"
[2afde70]739msgstr "Ожидается имя топо-съемки"
[859d2937]740
741#. TRANSLATORS: Program will exit shortly after printing this
[a665282]742#: ../src/message.c:227
[859d2937]743#: n:90
744msgid "Abnormal termination"
[2afde70]745msgstr "Аварийное завершение"
[859d2937]746
[a665282]747#: ../src/message.c:228
[859d2937]748#: n:91
749msgid "Arithmetic error"
750msgstr ""
751
[a665282]752#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
753#. opcodes -- corrupted program?
754#: ../src/message.c:231
[859d2937]755#: n:92
756msgid "Illegal instruction"
[0af9ff3]757msgstr "Недопустимая инструкция"
[859d2937]758
[a7d4233]759#: ../src/datain.c:401
760#: ../src/extend.c:554
[98cf5b5]761#: ../src/img_hosted.c:30
[31f1db0]762#: ../src/mainfrm.cc:425
763#: ../src/printwx.cc:1545
[a665282]764#: ../src/sorterr.c:146
[98cf5b5]765#: n:24
[859d2937]766#, c-format
767msgid "Couldn’t open file “%s”"
[98cf5b5]768msgstr "Невозможно открыть файл “%s”"
[859d2937]769
[31f1db0]770#: ../src/printwx.cc:649
[859d2937]771#: n:402
772#, c-format
773msgid "Couldn’t write file “%s”"
[2afde70]774msgstr "Невозможно сохранить файл “%s”"
[859d2937]775
[a665282]776#: ../src/message.c:232
[859d2937]777#: n:94
778msgid "Bad memory access"
779msgstr ""
780
781#. TRANSLATORS: If you're unsure what "deprecated" means, see:
782#. http://en.wikipedia.org/wiki/Deprecation
[11f3c9a]783#: ../src/commands.c:467
[dfc141d]784#: ../src/commands.c:540
785#: ../src/commands.c:562
[a7d4233]786#: ../src/commands.c:1160
787#: ../src/commands.c:1501
[859d2937]788#: ../src/readval.c:96
789#: n:95
790msgid "Further uses of this deprecated feature will not be reported"
791msgstr ""
792
[a665282]793#: ../src/message.c:233
[859d2937]794#: n:97
795msgid "Unknown signal received"
796msgstr ""
797
[a665282]798#. TRANSLATORS: Degrees are the angular measurement where there are
799#. 360 in a full circle.
[a7d4233]800#: ../src/datain.c:906
[859d2937]801#: n:98
802#, c-format
803msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
804msgstr ""
805
[a665282]806#. TRANSLATORS: Degrees are the angular measurement where
807#. there are 360 in a full circle.
[a7d4233]808#: ../src/datain.c:1082
[859d2937]809#: n:99
810#, c-format
811msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
812msgstr ""
813
[a7d4233]814#: ../src/commands.c:1157
[859d2937]815#: n:104
816#, c-format
817msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
[2afde70]818msgstr "“*data %s %c …” устарело - используйте “*data %s …” вместо него"
[859d2937]819
[a7d4233]820#: ../src/extend.c:507
[859d2937]821#: n:105
822msgid "Reading in data - please wait…"
[2afde70]823msgstr "Чтение исходных данных - пожалуйста ожидайте…"
[859d2937]824
[a665282]825#. TRANSLATORS: Perhaps the user tried to load a different type of file as
826#. a Survex .3d file, or the .3d file was corrupted.
827#: ../src/3dtopos.c:157
828#: ../src/3dtopos.c:163
[a7d4233]829#: ../src/cad3d.c:909
830#: ../src/cad3d.c:920
[31f1db0]831#: ../src/img_hosted.c:39
[859d2937]832#: n:106
833#, c-format
834msgid "Bad 3d image file “%s”"
835msgstr ""
836
[a665282]837#. TRANSLATORS: This is the date format string used to timestamp .3d
838#. files internally.  Probably best to keep it the same for all
839#. translations.
[859d2937]840#: ../src/img.c:43
[31f1db0]841#: ../src/mainfrm.cc:1444
[859d2937]842#: n:107
843#, c-format
844msgid "%a,%Y.%m.%d %H:%M:%S %Z"
[2afde70]845msgstr "%a,%Y.%m.%d %H:%M:%S %Z"
[859d2937]846
[a665282]847#. TRANSLATORS: used a processed survey with no processing date/time info
[31f1db0]848#: ../src/mainfrm.cc:1437
[859d2937]849#: n:108
850msgid "Date and time not available."
[2afde70]851msgstr "Дата и время недоступны."
[859d2937]852
[31f1db0]853#: ../src/img_hosted.c:40
[859d2937]854#: n:109
855#, c-format
856msgid "Error reading from file “%s”"
[2afde70]857msgstr "Ошибка чтения из файла “%s”"
[859d2937]858
859#: ../src/filename.c:79
[31f1db0]860#: ../src/img_hosted.c:41
861#: ../src/mainfrm.cc:383
862#: ../src/mainfrm.cc:1956
[859d2937]863#: n:110
864#, c-format
865msgid "Error writing to file “%s”"
[2afde70]866msgstr "Ошибка записи в файла “%s”"
[859d2937]867
868#: ../src/filename.c:82
869#: n:111
870msgid "Error writing to file"
[2afde70]871msgstr "Ошибка записи в файл"
[859d2937]872
[a665282]873#: ../src/sorterr.c:81
874#: ../src/sorterr.c:98
875#: ../src/sorterr.c:170
[859d2937]876#: n:112
877msgid "Couldn’t parse .err file"
[2afde70]878msgstr "Невозможно произвести разбор файла .err"
[859d2937]879
[a720caa]880#: ../src/cavern.c:388
[859d2937]881#: n:113
882#, c-format
883msgid "There were %d warning(s) and %d error(s) - no output files produced."
884msgstr ""
885
[31f1db0]886#: ../src/img_hosted.c:42
[859d2937]887#: n:114
888#, c-format
889msgid "File “%s” has a newer format than this program can understand"
[2afde70]890msgstr "Файл “%s” имеет более новый формат, с которым данная версия программы не может работать"
[859d2937]891
[31f1db0]892#: ../src/printwx.cc:997
[859d2937]893#: n:115
894msgid "North"
[0af9ff3]895msgstr "Север"
[859d2937]896
897#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
[31f1db0]898#: ../src/printwx.cc:1024
[859d2937]899#: n:116
900msgid "Elevation on"
901msgstr ""
902
[31f1db0]903#: ../src/printwx.cc:454
[859d2937]904#: n:117
905msgid "P&lan view"
[2afde70]906msgstr "П&лан"
[859d2937]907
[31f1db0]908#: ../src/printwx.cc:456
[859d2937]909#: n:285
910msgid "&Elevation"
[2afde70]911msgstr "&Разрез"
[859d2937]912
[a720caa]913#: ../src/gfxcore.cc:802
[31f1db0]914#: ../src/mainfrm.cc:166
[859d2937]915#: n:118
916msgid "Elevation"
[2afde70]917msgstr "Разрез"
[859d2937]918
[11f3c9a]919#. TRANSLATORS: Label used for "clino" in Aven when the view is
920#. from directly above.
[a720caa]921#: ../src/gfxcore.cc:714
[0fceb30]922#: n:432
923msgid "Plan"
[2afde70]924msgstr "Вид сверху"
[0fceb30]925
[11f3c9a]926#. TRANSLATORS: Label used for "clino" in Aven when the view is
927#. from directly below.
[a720caa]928#: ../src/gfxcore.cc:724
[0fceb30]929#: n:433
930msgid "Kiwi Plan"
[2afde70]931msgstr "Вид снизу"
[0fceb30]932
[11f3c9a]933#: ../src/cavern.c:352
[859d2937]934#: n:120
935msgid "Calculating statistics"
[2afde70]936msgstr "Расчет статистики"
[859d2937]937
[31f1db0]938#: ../src/readval.c:489
[859d2937]939#: n:121
940msgid "Expecting string field"
[2afde70]941msgstr "Ожидается строковое значение"
[859d2937]942
[a665282]943#: ../src/cmdline.c:212
[859d2937]944#: n:122
945msgid "too few arguments"
[2afde70]946msgstr "слишком мало аргументов"
[859d2937]947
[a665282]948#: ../src/cmdline.c:219
[859d2937]949#: n:123
950msgid "too many arguments"
[0af9ff3]951msgstr "слишком много аргументов"
[859d2937]952
[a665282]953#: ../src/cmdline.c:178
[859d2937]954#: ../src/cmdline.c:181
[a665282]955#: ../src/cmdline.c:185
[859d2937]956#: n:124
957msgid "FILE"
958msgstr "ФАЙЛ"
959
[a665282]960#. TRANSLATORS: In French, Eric chose to use the terminology used by
961#. toporobot: "sequence" for the English "traverse", which makes sense
962#. (although toporobot actually uses this term to mean something more
963#. specific).  Feel free to follow this lead if you can't think of a better
964#. term - these messages mostly indicate how processing is progressing.
[859d2937]965#.
966#. A trailing traverse is a dead end back to a junction.
[11f3c9a]967#: ../src/netskel.c:177
[859d2937]968#: n:125
969msgid "Removing trailing traverses"
970msgstr ""
971
[a665282]972#. TRANSLATORS: In French, Eric chose to use the terminology used by
973#. toporobot: "sequence" for the English "traverse", which makes sense
974#. (although toporobot actually uses this term to mean something more
975#. specific).  Feel free to follow this lead if you can't think of a better
976#. term - these messages mostly indicate how processing is progressing.
[11f3c9a]977#: ../src/netskel.c:236
[859d2937]978#: n:126
979msgid "Concatenating traverses"
980msgstr ""
981
[a665282]982#. TRANSLATORS: In French, Eric chose to use the terminology used by
983#. toporobot: "sequence" for the English "traverse", which makes sense
984#. (although toporobot actually uses this term to mean something more
985#. specific).  Feel free to follow this lead if you can't think of a better
986#. term - these messages mostly indicate how processing is progressing.
[11f3c9a]987#: ../src/netskel.c:434
[859d2937]988#: n:127
989msgid "Calculating traverses"
990msgstr ""
991
[a665282]992#. TRANSLATORS: In French, Eric chose to use the terminology used by
993#. toporobot: "sequence" for the English "traverse", which makes sense
994#. (although toporobot actually uses this term to mean something more
995#. specific).  Feel free to follow this lead if you can't think of a better
996#. term - these messages mostly indicate how processing is progressing.
[859d2937]997#.
998#. A trailing traverse is a dead end back to a junction.
[11f3c9a]999#: ../src/netskel.c:779
[859d2937]1000#: n:128
1001msgid "Calculating trailing traverses"
1002msgstr ""
1003
1004#: ../src/network.c:82
1005#: n:129
1006msgid "Simplifying network"
1007msgstr ""
1008
1009#: ../src/network.c:540
1010#: n:130
1011msgid "Calculating network"
1012msgstr ""
1013
[a7d4233]1014#: ../src/datain.c:1496
[859d2937]1015#: n:131
1016#, c-format
1017msgid "Found “%s”, expecting “F” or “B”"
[2afde70]1018msgstr "Вместо “%s” ожидается “F” или “B”"
[859d2937]1019
[a720caa]1020#: ../src/cavern.c:449
[859d2937]1021#: n:132
1022#, c-format
1023msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
1024msgstr ""
1025
[a720caa]1026#: ../src/cavern.c:452
[859d2937]1027#: n:133
1028#, c-format
1029msgid "Total plan length of survey legs = %7.2fm"
1030msgstr ""
1031
[a720caa]1032#: ../src/cavern.c:455
[859d2937]1033#: n:134
1034#, c-format
1035msgid "Total vertical length of survey legs = %7.2fm"
1036msgstr ""
1037
1038#. TRANSLATORS: numbers are altitudes of highest and lowest stations
[a720caa]1039#: ../src/cavern.c:462
[859d2937]1040#: n:135
1041#, c-format
1042msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1043msgstr ""
1044
1045#. TRANSLATORS: c.f. previous message
[a720caa]1046#: ../src/cavern.c:464
[859d2937]1047#: n:136
1048#, c-format
1049msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1050msgstr ""
1051
1052#. TRANSLATORS: c.f. previous two messages
[a720caa]1053#: ../src/cavern.c:466
[859d2937]1054#: n:137
1055#, c-format
1056msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1057msgstr ""
1058
[a720caa]1059#: ../src/cavern.c:434
[859d2937]1060#: n:138
1061msgid "There is 1 loop."
[2afde70]1062msgstr "Количество колец: 1"
[859d2937]1063
[a720caa]1064#: ../src/cavern.c:436
[859d2937]1065#: n:139
1066#, c-format
1067msgid "There are %ld loops."
[2afde70]1068msgstr "Количество колец: %ld"
[859d2937]1069
[11f3c9a]1070#: ../src/cavern.c:374
[859d2937]1071#: n:140
1072#, c-format
1073msgid "CPU time used %5.2fs"
1074msgstr ""
1075
[11f3c9a]1076#: ../src/cavern.c:377
[859d2937]1077#: n:141
1078#, c-format
1079msgid "Time used %5.2fs"
1080msgstr ""
1081
[11f3c9a]1082#: ../src/cavern.c:379
[859d2937]1083#: n:142
1084msgid "Time used unavailable"
[2afde70]1085msgstr "Отчет о затраченном времени недоступен"
[859d2937]1086
[11f3c9a]1087#: ../src/cavern.c:382
[859d2937]1088#: n:143
1089#, c-format
1090msgid "Time used %5.2fs (%5.2fs CPU time)"
[2afde70]1091msgstr "Затрачено времени %5.2fs (%5.2fs затрачено процессором)"
[859d2937]1092
[11f3c9a]1093#: ../src/netskel.c:744
[859d2937]1094#: n:145
1095#, c-format
1096msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1097msgstr ""
1098
[11f3c9a]1099#: ../src/netskel.c:747
[859d2937]1100#: n:146
1101#, c-format
1102msgid "Error %6.2f%%"
1103msgstr "Ошибка %6.2f%%"
1104
[a665282]1105#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1106#. traverse has zero length, so error per metre is meaningless.
1107#.
1108#. There should be 4 spaces between "Error" and "N/A" so that it lines
1109#. up with the numbers in the message above.
[11f3c9a]1110#: ../src/netskel.c:754
[859d2937]1111#: n:147
1112msgid "Error    N/A"
1113msgstr "Ошибка   N/A"
1114
1115#. TRANSLATORS: description of --help option
[a665282]1116#: ../src/cmdline.c:138
[859d2937]1117#: n:150
1118msgid "display this help and exit"
[94e25ff]1119msgstr "показать справку и выйти"
[859d2937]1120
1121#. TRANSLATORS: description of --verbose option
[a665282]1122#: ../src/cmdline.c:141
[859d2937]1123#: n:151
1124msgid "output version information and exit"
[94e25ff]1125msgstr "вывести информацию о версии и выйти"
[859d2937]1126
1127#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
[a665282]1128#: ../src/cmdline.c:170
[859d2937]1129#: n:153
1130msgid "OPTION"
[94e25ff]1131msgstr "ОПЦИЯ"
[859d2937]1132
[31f1db0]1133#: ../src/mainfrm.cc:170
1134#: ../src/printwx.cc:402
1135#: ../src/printwx.cc:1069
1136#: ../src/printwx.cc:1118
[859d2937]1137#: n:154
1138msgid "Scale"
1139msgstr "Масштаб"
1140
[a665282]1141#: ../src/cmdline.c:194
[859d2937]1142#: n:157
1143#, c-format
1144msgid "Try “%s --help” for more information.\n"
[2afde70]1145msgstr "Выполните “%s --help” для получения дополнительной информации.\n"
[859d2937]1146
1147#: ../src/avenprcore.cc:269
1148#: n:166
1149#, c-format
1150msgid "Page %d of %d"
[0af9ff3]1151msgstr "Страница %d из %d"
[859d2937]1152
1153#: ../src/avenprcore.cc:272
[31f1db0]1154#: ../src/printwx.cc:1551
[859d2937]1155#: n:167
1156#, c-format
1157msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1158msgstr ""
1159
1160#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1161#. something like "123°".  The bearing is up the page.
[31f1db0]1162#: ../src/printwx.cc:1005
[859d2937]1163#: n:168
1164#, c-format
1165msgid "Plan view, %s up page"
1166msgstr ""
1167
[a665282]1168#. TRANSLATORS: This is used on printouts of elevations, with %s
1169#. replaced by something like "123°".  The bearing is the direction
1170#. we’re looking.
[31f1db0]1171#: ../src/printwx.cc:1043
[859d2937]1172#: n:169
1173#, c-format
1174msgid "Elevation facing %s"
1175msgstr ""
1176
[a665282]1177#. TRANSLATORS: This is used on printouts of tilted elevations, with
1178#. the first %s replaced by something like "123°", and the second by
1179#. something like "-45°".  The bearing is the direction we’re
1180#. looking.
[31f1db0]1181#: ../src/printwx.cc:1052
[859d2937]1182#: n:284
1183#, c-format
1184msgid "Elevation facing %s, tilted %s"
[2afde70]1185msgstr "Разрез-проекция, направление взгляда  - азимут %s, угол %s"
[859d2937]1186
1187#. TRANSLATORS: This is used on printouts of extended elevations.
[31f1db0]1188#: ../src/printwx.cc:1061
[859d2937]1189#: n:191
1190msgid "Extended elevation"
[2afde70]1191msgstr "Разрез-развертка"
[859d2937]1192
[a720caa]1193#: ../src/cavern.c:420
[859d2937]1194#: n:172
1195msgid "Survey contains 1 survey station,"
[2afde70]1196msgstr "Топо-съемка содержит пикетов: 1,"
[859d2937]1197
[a720caa]1198#: ../src/cavern.c:422
[859d2937]1199#: n:173
1200#, c-format
1201msgid "Survey contains %ld survey stations,"
[2afde70]1202msgstr "Топо-съемка содержит пикетов: %ld,"
[859d2937]1203
[a720caa]1204#: ../src/cavern.c:426
[859d2937]1205#: n:174
1206msgid " joined by 1 leg."
[2afde70]1207msgstr " замеров: 1."
[859d2937]1208
[a720caa]1209#: ../src/cavern.c:428
[859d2937]1210#: n:175
1211#, c-format
1212msgid " joined by %ld legs."
[2afde70]1213msgstr " замеров: %ld."
[859d2937]1214
1215#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
[a7d4233]1216#: ../src/listpos.c:185
[859d2937]1217#: n:176
1218msgid "node"
1219msgstr ""
1220
1221#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
[a7d4233]1222#: ../src/listpos.c:187
[859d2937]1223#: n:177
1224msgid "nodes"
1225msgstr ""
1226
[a665282]1227#. TRANSLATORS: "Connected component" in the graph theory sense - it
1228#. means there are %ld bits of survey with no connections between them.
1229#. This message is only used if there are more than 1.
[a720caa]1230#: ../src/cavern.c:445
[859d2937]1231#: n:178
1232#, c-format
1233msgid "Survey has %ld connected components."
1234msgstr ""
1235
[a665282]1236#. TRANSLATORS: Label for button in aven’s cavern log window which
1237#. causes the survey data to be reprocessed.
[31f1db0]1238#: ../src/cavernlog.cc:453
1239#: ../src/cavernlog.cc:464
[859d2937]1240#: n:184
1241msgid "Reprocess"
1242msgstr ""
1243
[a665282]1244#: ../src/cmdline.c:242
1245#: ../src/cmdline.c:261
[859d2937]1246#: n:185
1247#, c-format
1248msgid "numeric argument “%s” out of range"
[2afde70]1249msgstr "числовой аргумент “%s” имеет недопустимое значение"
[859d2937]1250
[a665282]1251#: ../src/cmdline.c:244
[859d2937]1252#: n:186
1253#, c-format
1254msgid "argument “%s” not an integer"
[2afde70]1255msgstr "аргумент “%s” не является целым числом"
[859d2937]1256
[a665282]1257#: ../src/cmdline.c:263
[859d2937]1258#: n:187
1259#, c-format
1260msgid "argument “%s” not a number"
[2afde70]1261msgstr "аргумент “%s” не является числом"
[859d2937]1262
[29d1883]1263#: ../src/commands.c:900
[859d2937]1264#: n:188
1265msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
[2afde70]1266msgstr "Ожидается “DUPLICATE”, “SPLAY” или “SURFACE”"
[859d2937]1267
[29d1883]1268#: ../src/commands.c:903
[859d2937]1269#: n:189
1270msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
[2afde70]1271msgstr "Ожидается “NOT”, “DUPLICATE”, “SPLAY” или “SURFACE”"
[859d2937]1272
1273#: ../src/listpos.c:82
1274#: n:190
1275#, c-format
1276msgid "Station “%s” referred to by *entrance or *export but never used"
1277msgstr ""
1278
[dfc141d]1279#: ../src/commands.c:646
[859d2937]1280#: n:192
1281msgid "No matching BEGIN"
[2afde70]1282msgstr "Нет соответствующей команды BEGIN"
[859d2937]1283
[613028c]1284#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
1285#. same <survey> if it’s given at all
[dfc141d]1286#: ../src/commands.c:674
[859d2937]1287#: n:193
[613028c]1288msgid "Survey name doesn’t match BEGIN"
[c6e9faf]1289msgstr "Имя топо-съемки не совпадает с именем, указанным в команде BEGIN"
[859d2937]1290
[613028c]1291#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1292#. END command omits it, e.g.:
1293#.
1294#. *begin entrance
1295#. 1 2 10.00 178 -01
1296#. *end     <--[Message given here]
[dfc141d]1297#: ../src/commands.c:683
[859d2937]1298#: n:194
[613028c]1299msgid "Survey name omitted from END"
[c6e9faf]1300msgstr "Имя топосъемки указано в BEGIN, но отсутствует в END"
[859d2937]1301
[a665282]1302#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the “,”s
1303#. (or at least the columns) are in the same place
1304#: ../src/3dtopos.c:112
[859d2937]1305#: n:195
1306msgid "( Easting, Northing, Altitude )"
1307msgstr "( Easting, Northing, Высота   )"
1308
1309#. TRANSLATORS: bpp is "Bits Per Pixel"
[a7d4233]1310#: ../src/aboutdlg.cc:188
[859d2937]1311#: n:196
1312#, c-format
1313msgid "Display Depth: %d bpp"
[c6e9faf]1314msgstr "Глубина цвета: %d bpp"
[859d2937]1315
1316#. TRANSLATORS: appended to previous message if the display is colour
[a7d4233]1317#: ../src/aboutdlg.cc:190
[859d2937]1318#: n:197
1319msgid " (colour)"
[c6e9faf]1320msgstr " (цветное)"
[859d2937]1321
[31f1db0]1322#: ../src/readval.c:512
1323#: ../src/readval.c:522
1324#: ../src/readval.c:530
[859d2937]1325#: n:198
1326#, c-format
1327msgid "Expecting date, found “%s”"
[c6e9faf]1328msgstr "Вместо “%s” ожидается дата"
[859d2937]1329
[a665282]1330#. TRANSLATORS: --help output for --survey option.
1331#.
[859d2937]1332#. "this" has been added to English translation
1333#: ../src/3dtopos.c:50
[a665282]1334#: ../src/aven.cc:66
1335#: ../src/cad3d.c:660
[859d2937]1336#: ../src/diffpos.c:57
1337#: ../src/dump3d.c:49
[a7d4233]1338#: ../src/extend.c:459
[859d2937]1339#: n:199
1340msgid "only load the sub-survey with this prefix"
[c6e9faf]1341msgstr "обрабатывать топо-съемки только с указаным префиксом"
[859d2937]1342
1343#. TRANSLATORS: --help output for aven --print option
[a665282]1344#: ../src/aven.cc:68
[859d2937]1345#: n:119
1346msgid "print and exit (requires a 3d file)"
[c6e9faf]1347msgstr "распечатать и выйти (нуобходимо указать 3d файл)"
[859d2937]1348
1349#. TRANSLATORS: --help output for cavern --percentage option
[11f3c9a]1350#: ../src/cavern.c:125
[859d2937]1351#: n:161
1352msgid "display percentage progress"
[c6e9faf]1353msgstr "отображать ход выполнения задачи в процентах"
[859d2937]1354
1355#. TRANSLATORS: --help output for cavern --output option
[11f3c9a]1356#: ../src/cavern.c:127
[859d2937]1357#: n:162
1358msgid "set location for output files"
[c6e9faf]1359msgstr "указать местоположения для выходных файлов"
[859d2937]1360
1361#. TRANSLATORS: --help output for cavern --quiet option
[11f3c9a]1362#: ../src/cavern.c:129
[859d2937]1363#: n:163
1364msgid "only show brief summary (-qq for errors only)"
[c6e9faf]1365msgstr "отображать только краткие итоги (-qq для отображения только ошибок)"
[859d2937]1366
1367#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
[11f3c9a]1368#: ../src/cavern.c:131
[859d2937]1369#: n:164
1370msgid "do not create .err file"
[c6e9faf]1371msgstr "не создавать файл .err"
[859d2937]1372
1373#. TRANSLATORS: --help output for cavern --warnings-are-errors option
[11f3c9a]1374#: ../src/cavern.c:133
[859d2937]1375#: n:165
1376msgid "turn warnings into errors"
[c6e9faf]1377msgstr "трактовать предупреждения как ошибки"
[859d2937]1378
1379#. TRANSLATORS: --help output for cavern --log option
[11f3c9a]1380#: ../src/cavern.c:135
[859d2937]1381#: n:170
1382msgid "log output to .log file"
[c6e9faf]1383msgstr "выводить сообщения программы в .log файл"
[859d2937]1384
1385#. TRANSLATORS: --help output for cavern --3d-version option
[11f3c9a]1386#: ../src/cavern.c:137
[859d2937]1387#: n:171
1388msgid "specify the 3d file format version to output"
[c6e9faf]1389msgstr "указать версию формата в котором будет сохранятся 3d файл"
[859d2937]1390
1391#. TRANSLATORS: --help output for sorterr --horizontal option
[a665282]1392#: ../src/sorterr.c:53
[859d2937]1393#: n:179
1394msgid "sort by horizontal error factor"
[c6e9faf]1395msgstr "сортировать по величине горизонтальной составляющей ошибки"
[859d2937]1396
1397#. TRANSLATORS: --help output for sorterr --vertical option
[a665282]1398#: ../src/sorterr.c:55
[859d2937]1399#: n:180
1400msgid "sort by vertical error factor"
[c6e9faf]1401msgstr "сортировать по величине вертикальной составляющей ошибки"
[859d2937]1402
1403#. TRANSLATORS: --help output for sorterr --percentage option
[a665282]1404#: ../src/sorterr.c:57
[859d2937]1405#: n:181
1406msgid "sort by percentage error"
[c6e9faf]1407msgstr "сортировать по проценту ошибки относительно длинны кольца"
[859d2937]1408
1409#. TRANSLATORS: --help output for sorterr --per-leg option
[a665282]1410#: ../src/sorterr.c:59
[859d2937]1411#: n:182
1412msgid "sort by error per leg"
[c6e9faf]1413msgstr "сортировать по средней величине ошибки на замер"
[859d2937]1414
1415#. TRANSLATORS: --help output for sorterr --replace option
[a665282]1416#: ../src/sorterr.c:61
[859d2937]1417#: n:183
1418msgid "replace .err file with resorted version"
[c6e9faf]1419msgstr "заменить .err файл на пересортированный"
[859d2937]1420
1421#. TRANSLATORS: --help output for dump3d --rewind option
[a665282]1422#: ../src/dump3d.c:51
[859d2937]1423#: n:204
1424msgid "rewind file and read it a second time"
[c6e9faf]1425msgstr "повторно перечитать файл"
[859d2937]1426
[a665282]1427#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1428#. meaningless to say your tape is marked in "0 feet" (but you might
1429#. measure distance by counting knots on a diving line, and tie them
1430#. every "2 feet").
[a7d4233]1431#: ../src/commands.c:1417
[859d2937]1432#: n:200
1433msgid "*UNITS factor must be non-zero"
[c6e9faf]1434msgstr "Коэффициент в команде *UNITS должен быть ненулевым"
[859d2937]1435
1436#. TRANSLATORS: In the "File" menu
[31f1db0]1437#: ../src/mainfrm.cc:802
[859d2937]1438#: n:201
1439msgid "&Screenshot…"
[b1147af]1440msgstr "&Снимок экрана…"
[859d2937]1441
[31f1db0]1442#: ../src/mainfrm.cc:1454
[859d2937]1443#: n:202
1444#, c-format
1445msgid "No survey data in 3d file “%s”"
[c6e9faf]1446msgstr "Данные топо-съемки не найдены в файле “%s”"
[859d2937]1447
[a720caa]1448#: ../src/gfxcore.cc:704
[859d2937]1449#: n:203
1450msgid "Facing"
1451msgstr ""
1452
1453#. TRANSLATORS: for the title of the About box
[a665282]1454#: ../src/aboutdlg.cc:70
[859d2937]1455#: n:205
1456#, c-format
1457msgid "About %s"
[c6e9faf]1458msgstr "О программе %s"
[859d2937]1459
[a665282]1460#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1461#. - it should be translated to the terminology that cavers using the
1462#. language would use.
[859d2937]1463#.
1464#. File->Open dialog:
[31f1db0]1465#: ../src/mainfrm.cc:1928
[859d2937]1466#: n:206
1467msgid "Select a survey file to view"
[c6e9faf]1468msgstr "Выберите топо-съемку для просмотра"
[859d2937]1469
[a7d4233]1470#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
1471#. file extension, so neither should be translated.
[31f1db0]1472#: ../src/mainfrm.cc:1905
[859d2937]1473#: n:207
1474msgid "Survex 3d files"
[d5b33cb]1475msgstr "Survex 3d файлы"
[859d2937]1476
[31f1db0]1477#: ../src/mainfrm.cc:1920
1478#: ../src/mainfrm.cc:2357
1479#: ../src/printwx.cc:629
[859d2937]1480#: n:208
1481msgid "All files"
[d5b33cb]1482msgstr "Все файлы"
[859d2937]1483
[a665282]1484#. TRANSLATORS: Here "survey" is a "cave map" rather than
1485#. list of questions - it should be translated to the
1486#. terminology that cavers using the language would use.
[31f1db0]1487#: ../src/mainfrm.cc:1902
[859d2937]1488#: n:229
1489msgid "All survey files"
[c6e9faf]1490msgstr "Все файлы топо-съемок"
[859d2937]1491
[a7d4233]1492#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
1493#. file extension, so neither should be translated.
[31f1db0]1494#: ../src/mainfrm.cc:1908
[859d2937]1495#: n:329
1496msgid "Survex svx files"
[d5b33cb]1497msgstr "Survex svx файлы"
[859d2937]1498
[a665282]1499#. TRANSLATORS: "Compass" as in Larry Fish’s cave
[a7d4233]1500#. surveying package, so should not be translated
[31f1db0]1501#: ../src/mainfrm.cc:1916
[859d2937]1502#: n:330
1503msgid "Compass DAT and MAK files"
[c6e9faf]1504msgstr "DAT и MAK файлы Compass"
[859d2937]1505
[31f1db0]1506#: ../src/printwx.cc:277
[859d2937]1507#: n:411
1508msgid "DXF files"
[d5b33cb]1509msgstr "DXF файлы"
[859d2937]1510
[31f1db0]1511#: ../src/printwx.cc:278
[859d2937]1512#: n:412
1513msgid "EPS files"
[d5b33cb]1514msgstr "EPS файлы"
[859d2937]1515
[31f1db0]1516#: ../src/printwx.cc:279
[859d2937]1517#: n:413
1518msgid "GPX files"
[d5b33cb]1519msgstr "GPX файлы"
[859d2937]1520
[a7d4233]1521#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
1522#. on a (usually large) sheet of paper using a pen mounted in a motorised
1523#. mechanism.
[31f1db0]1524#: ../src/printwx.cc:283
[859d2937]1525#: n:414
1526msgid "HPGL for plotters"
[c6e9faf]1527msgstr "HPGL файлы (для плоттера)"
[859d2937]1528
[31f1db0]1529#: ../src/printwx.cc:285
[aa430ec]1530#: n:444
1531msgid "KML files"
[d5b33cb]1532msgstr "KML файлы"
[aa430ec]1533
[a7d4233]1534#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
1535#. so should not be translated:
1536#. http://www.fountainware.com/compass/
1537#. http://www.psc-cavers.org/carto/
[31f1db0]1538#: ../src/printwx.cc:290
[859d2937]1539#: n:415
1540msgid "Compass PLT for use with Carto"
[c6e9faf]1541msgstr "Compass PLT файлы для использования в Carto"
[859d2937]1542
[a7d4233]1543#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
1544#. translated: http://www.skencil.org/
[31f1db0]1545#: ../src/printwx.cc:293
[859d2937]1546#: n:416
1547msgid "Skencil files"
[d5b33cb]1548msgstr "Skencil файлы"
[859d2937]1549
[31f1db0]1550#: ../src/printwx.cc:294
[859d2937]1551#: n:417
1552msgid "SVG files"
[d5b33cb]1553msgstr "SVG файлы"
[859d2937]1554
[31f1db0]1555#: ../src/printwx.cc:284
1556#: n:445
1557msgid "JSON files"
1558msgstr ""
1559
[a665282]1560#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1561#. - it should be translated to the terminology that cavers using the
1562#. language would use.
[859d2937]1563#.
1564#. This string is used in the about box (summarising the purpose of aven).
[a7d4233]1565#: ../src/aboutdlg.cc:98
[859d2937]1566#: n:209
1567msgid "Survey visualisation tool"
[c6e9faf]1568msgstr "Инструмент для визуализации топо-съемок пещер"
[859d2937]1569
[a665282]1570#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
1571#. accelerator key.  The accelerators must be different within this group
[31f1db0]1572#: ../src/mainfrm.cc:967
[859d2937]1573#: n:210
1574msgid "&File"
1575msgstr "&Файл"
1576
[31f1db0]1577#: ../src/mainfrm.cc:968
[859d2937]1578#: n:211
1579msgid "&Rotation"
[94e25ff]1580msgstr "В&ращение"
[859d2937]1581
[31f1db0]1582#: ../src/mainfrm.cc:969
[859d2937]1583#: n:212
1584msgid "&Orientation"
1585msgstr "&Ориентация"
1586
[31f1db0]1587#: ../src/mainfrm.cc:970
[859d2937]1588#: n:213
1589msgid "&View"
[94e25ff]1590msgstr "&Вид"
[859d2937]1591
[31f1db0]1592#: ../src/mainfrm.cc:972
[859d2937]1593#: n:214
1594msgid "&Controls"
[94e25ff]1595msgstr "&Управление"
[859d2937]1596
[31f1db0]1597#: ../src/mainfrm.cc:981
[859d2937]1598#: n:215
1599msgid "&Help"
[8384422]1600msgstr "По&мощь"
[859d2937]1601
[31f1db0]1602#: ../src/mainfrm.cc:974
[859d2937]1603#: n:216
1604msgid "&Presentation"
[c6e9faf]1605msgstr "&Презентация"
[859d2937]1606
[a7d4233]1607#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
1608#. some languages here:
1609#. http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
1610#: ../src/aboutdlg.cc:112
[859d2937]1611#: n:219
1612msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
[c6e9faf]1613msgstr "Эта программа является свободным программным обеспечением; Вы можете распространять и/или изменять его в соответствии с условиями GNU General Public Licence, опубликованной Фондом свободного программного обеспечения; действительно либо для версии 2 Лицензии, либо (по вашему выбору) любой более поздней версии."
[859d2937]1614
1615#. TRANSLATORS: Part of 3dtopos --help
[a665282]1616#: ../src/3dtopos.c:86
[859d2937]1617#: n:217
1618msgid "3D_FILE [POS_FILE]"
[c6e9faf]1619msgstr "3D_ФАЙЛ [POS_ФАЙЛ]"
[859d2937]1620
1621#. TRANSLATORS: Part of diffpos --help
[a665282]1622#: ../src/diffpos.c:265
[859d2937]1623#: n:218
1624msgid "FILE1 FILE2 [THRESHOLD]"
[c6e9faf]1625msgstr "ФАЙЛ1 ФАЙЛ2 [ПОРОГ]"
[859d2937]1626
1627#. TRANSLATORS: Part of diffpos --help
[a665282]1628#: ../src/diffpos.c:267
[859d2937]1629#: n:255
1630#, c-format
1631msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
[c6e9faf]1632msgstr "ФАЙЛ1 и ФАЙЛ2 могут быть .pos или .3d файлами\nПОРОГ это максимальное игнорируемое изменение в метрах вдоль любой из координатных осей (по умолчанию %s)"
[859d2937]1633
1634#. TRANSLATORS: Part of extend --help
[a7d4233]1635#: ../src/extend.c:481
[859d2937]1636#: n:267
1637msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
[c6e9faf]1638msgstr "ВХОДНОЙ_3D_ФАЙЛ [ВЫХОДНОЙ_3D_ФАЙЛ]"
[859d2937]1639
1640#. TRANSLATORS: Part of sorterr --help
[a665282]1641#: ../src/sorterr.c:127
[859d2937]1642#: n:268
1643msgid "ERR_FILE [HOW_MANY]"
1644msgstr ""
1645
[a665282]1646#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1647#. - it should be translated to the terminology that cavers using the
1648#. language would use.
[859d2937]1649#.
1650#. Part of aven --help
[a665282]1651#: ../src/aven.cc:115
1652#: ../src/aven.cc:139
[859d2937]1653#: n:269
1654msgid "[SURVEY_FILE]"
[c6e9faf]1655msgstr "[ФАЙЛ_ТОПОСЪЕМКИ]"
[859d2937]1656
[a665282]1657#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
1658#. accelerator key.
1659#.
[859d2937]1660#. The string "\t" separates the menu text and any accelerator key.
[a665282]1661#.
1662#. "File" menu.  The accelerators must be different within this group.
[859d2937]1663#. c.f. 201, 380, 381.
[31f1db0]1664#: ../src/mainfrm.cc:795
[859d2937]1665#: n:220
1666msgid "&Open…\tCtrl+O"
1667msgstr "&Открыть…\tCtrl+O"
1668
[a665282]1669#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
[a7d4233]1670#. are surveys without date information.  Try to keep this fairly short.
1671#: ../src/gfxcore.cc:1048
[859d2937]1672#: n:221
1673msgid "Undated"
[c6e9faf]1674msgstr "Дата не указана"
[859d2937]1675
1676#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
[a7d4233]1677#. which aren’t part of a loop and so have no error information. Try to keep
1678#. this fairly short.
1679#: ../src/gfxcore.cc:1073
[859d2937]1680#: n:290
1681msgid "Not in loop"
[c6e9faf]1682msgstr "Не в кольце"
[859d2937]1683
[a665282]1684#. TRANSLATORS: error from:
1685#.
1686#. *data normal newline from to tape compass clino
[a7d4233]1687#: ../src/commands.c:1261
[859d2937]1688#: n:222
1689msgid "NEWLINE can’t be the first reading"
[c6e9faf]1690msgstr "NEWLINE не может быть первым значением"
[859d2937]1691
[a665282]1692#. TRANSLATORS: error from:
1693#.
1694#. *data normal from to tape compass clino newline
[a7d4233]1695#: ../src/commands.c:1299
[859d2937]1696#: n:223
1697msgid "NEWLINE can’t be the last reading"
[c6e9faf]1698msgstr "NEWLINE не может быть последним значением"
[859d2937]1699
[a665282]1700#. TRANSLATORS: Error given by something like:
1701#.
1702#. *data normal station tape compass clino
1703#.
1704#. ("station" signifies interleaved data).
[a7d4233]1705#: ../src/commands.c:1322
[859d2937]1706#: n:224
1707msgid "Interleaved readings, but no NEWLINE"
[c6e9faf]1708msgstr "Стиль данных подразумевает наличие перевода строки, но NEWLINE отсутствует"
[859d2937]1709
[a665282]1710#. TRANSLATORS: caused by e.g.
1711#.
1712#. *data diving station newline depth tape compass
1713#.
1714#. ("depth" needs to occur before "newline").
[a7d4233]1715#: ../src/commands.c:1198
[859d2937]1716#: n:225
1717#, c-format
1718msgid "Reading “%s” must occur before NEWLINE"
[c6e9faf]1719msgstr "Значение “%s” должно быть перед NEWLINE"
[859d2937]1720
[a665282]1721#. TRANSLATORS: e.g.
1722#.
1723#. *data normal from to tape newline compass clino
[a7d4233]1724#: ../src/commands.c:1251
[859d2937]1725#: n:226
1726msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
[c6e9faf]1727msgstr "Значению NEWLINE могут предшествовать только значения STATION, DEPTH или COUNT"
[859d2937]1728
[a7d4233]1729#. TRANSLATORS: e.g.
1730#.
1731#. *calibrate tape compass 1 1
1732#: ../src/commands.c:1455
[859d2937]1733#: n:227
1734msgid "Can’t calibrate angular and length quantities together"
1735msgstr ""
1736
[dfc141d]1737#: ../src/commands.c:589
[859d2937]1738#: n:397
1739msgid "Bad *alias command"
1740msgstr ""
1741
[a665282]1742#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1743#. currently)
1744#: ../src/log.cc:32
[859d2937]1745#: n:228
1746#, c-format
1747msgid "%s Error Log"
[c6e9faf]1748msgstr "Журнал ошибок %s"
[859d2937]1749
[a665282]1750#. TRANSLATORS: The text on the action button in the "Export" settings
1751#. dialog
[31f1db0]1752#: ../src/printwx.cc:588
[859d2937]1753#: n:230
1754msgid "&Export…"
[c6e9faf]1755msgstr "&Экспорт"
[859d2937]1756
[a665282]1757#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
1758#. this group.  Tickable menu item which toggles auto rotation
[31f1db0]1759#: ../src/mainfrm.cc:823
[859d2937]1760#: n:231
1761msgid "Au&to-Rotate\tSpace"
[c6e9faf]1762msgstr "Ав&томатическое вращение\tSpace"
[859d2937]1763
[31f1db0]1764#: ../src/mainfrm.cc:825
[859d2937]1765#: n:232
1766msgid "Speed &Up"
[c6e9faf]1767msgstr "&Ускорить вращение"
[859d2937]1768
[31f1db0]1769#: ../src/mainfrm.cc:826
[859d2937]1770#: n:233
1771msgid "Slow &Down"
[c6e9faf]1772msgstr "&Замедлить вращение"
[859d2937]1773
[31f1db0]1774#: ../src/mainfrm.cc:828
[859d2937]1775#: n:234
1776msgid "&Reverse Direction"
[c6e9faf]1777msgstr "&Поменять направление вращения"
[859d2937]1778
[31f1db0]1779#: ../src/mainfrm.cc:830
[859d2937]1780#: n:235
1781msgid "Step Once &Anticlockwise"
[c6e9faf]1782msgstr "Шаг П&ротив часовой стрелки"
[859d2937]1783
[31f1db0]1784#: ../src/mainfrm.cc:831
[859d2937]1785#: n:236
1786msgid "Step Once &Clockwise"
[c6e9faf]1787msgstr "Шаг По &часовой стрелке"
[859d2937]1788
1789#. TRANSLATORS: View *looking* North
[a7d4233]1790#: ../src/gfxcore.cc:3262
[31f1db0]1791#: ../src/mainfrm.cc:834
[859d2937]1792#: n:240
1793msgid "View &North"
[c6e9faf]1794msgstr "На &Север"
[859d2937]1795
1796#. TRANSLATORS: View *looking* East
[a7d4233]1797#: ../src/gfxcore.cc:3264
[31f1db0]1798#: ../src/mainfrm.cc:835
[859d2937]1799#: n:241
1800msgid "View &East"
[c6e9faf]1801msgstr "На &Восток"
[859d2937]1802
1803#. TRANSLATORS: View *looking* South
[a7d4233]1804#: ../src/gfxcore.cc:3266
[31f1db0]1805#: ../src/mainfrm.cc:836
[859d2937]1806#: n:242
1807msgid "View &South"
[c6e9faf]1808msgstr "На &Юг"
[859d2937]1809
1810#. TRANSLATORS: View *looking* West
[a7d4233]1811#: ../src/gfxcore.cc:3268
[31f1db0]1812#: ../src/mainfrm.cc:837
[859d2937]1813#: n:243
1814msgid "View &West"
[c6e9faf]1815msgstr "На &Запад"
[859d2937]1816
[a665282]1817#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1818#. - it should be translated to the terminology that cavers using the
1819#. language would use.
[31f1db0]1820#: ../src/mainfrm.cc:842
[859d2937]1821#: n:244
1822msgid "Shift Survey &Left"
[c6e9faf]1823msgstr "Сдвиг В&лево"
[859d2937]1824
[a665282]1825#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1826#. - it should be translated to the terminology that cavers using the
1827#. language would use.
[31f1db0]1828#: ../src/mainfrm.cc:846
[859d2937]1829#: n:245
1830msgid "Shift Survey &Right"
[c6e9faf]1831msgstr "Сдвиг В&право"
[859d2937]1832
[a665282]1833#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1834#. - it should be translated to the terminology that cavers using the
1835#. language would use.
[31f1db0]1836#: ../src/mainfrm.cc:850
[859d2937]1837#: n:246
1838msgid "Shift Survey &Up"
[c6e9faf]1839msgstr "Сдвиг В&верх"
[859d2937]1840
[a665282]1841#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1842#. - it should be translated to the terminology that cavers using the
1843#. language would use.
[31f1db0]1844#: ../src/mainfrm.cc:854
[859d2937]1845#: n:247
1846msgid "Shift Survey &Down"
[c6e9faf]1847msgstr "Сдвиг В&низ"
[859d2937]1848
[a7d4233]1849#: ../src/gfxcore.cc:3285
[31f1db0]1850#: ../src/mainfrm.cc:856
[859d2937]1851#: n:248
1852msgid "&Plan View"
[69ddbce]1853msgstr "&План"
[859d2937]1854
[a7d4233]1855#: ../src/gfxcore.cc:3286
[31f1db0]1856#: ../src/mainfrm.cc:857
[859d2937]1857#: n:249
1858msgid "Ele&vation"
[69ddbce]1859msgstr "&Разрез"
[859d2937]1860
[31f1db0]1861#: ../src/mainfrm.cc:859
[859d2937]1862#: n:250
1863msgid "&Higher Viewpoint"
1864msgstr ""
1865
[31f1db0]1866#: ../src/mainfrm.cc:860
[859d2937]1867#: n:251
1868msgid "L&ower Viewpoint"
1869msgstr ""
1870
[31f1db0]1871#: ../src/mainfrm.cc:863
[859d2937]1872#: n:252
1873msgid "&Zoom In\t]"
1874msgstr ""
1875
[31f1db0]1876#: ../src/mainfrm.cc:864
[859d2937]1877#: n:253
1878msgid "Zoo&m Out\t["
1879msgstr ""
1880
[31f1db0]1881#: ../src/mainfrm.cc:866
[859d2937]1882#: n:254
1883msgid "Restore De&fault View"
1884msgstr ""
1885
[a665282]1886#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1887#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1888#. the "what to print/export" dialog.
[31f1db0]1889#: ../src/printwx.cc:366
[859d2937]1890#: n:283
1891msgid "View"
[94e25ff]1892msgstr "Вид"
[859d2937]1893
[a665282]1894#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1895#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1896#. "Elements" isn’t a good name for this but nothing better has yet come to
1897#. mind!
[31f1db0]1898#: ../src/printwx.cc:371
[859d2937]1899#: n:256
1900msgid "Elements"
[94e25ff]1901msgstr "Элементы"
[859d2937]1902
[31f1db0]1903#: ../src/printwx.cc:377
1904#: n:410
1905msgid "Export format"
1906msgstr ""
1907
1908#: ../src/printwx.cc:426
1909#: ../src/printwx.cc:801
[859d2937]1910#: n:257
1911#, c-format
1912msgid "%d pages (%dx%d)"
[c6e9faf]1913msgstr "%d страниц (%dx%d)"
[859d2937]1914
[a665282]1915#. TRANSLATORS: used in the scale drop down selector in the print
1916#. dialog the implicit meaning is "choose a suitable scale to fit
1917#. the plot on a single page", but we need something shorter
[31f1db0]1918#: ../src/printwx.cc:408
1919#: ../src/printwx.cc:820
[859d2937]1920#: n:258
1921msgid "One page"
[c6e9faf]1922msgstr "Одна страница"
[859d2937]1923
[31f1db0]1924#: ../src/mainfrm.cc:162
1925#: ../src/printwx.cc:439
[859d2937]1926#: n:259
1927msgid "Bearing"
[c6e9faf]1928msgstr "Азимут"
[859d2937]1929
[31f1db0]1930#: ../src/printwx.cc:478
[859d2937]1931#: n:260
1932msgid "Station Names"
[c6e9faf]1933msgstr "Названия пикетов"
[859d2937]1934
[31f1db0]1935#: ../src/printwx.cc:474
[859d2937]1936#: n:261
1937msgid "Crosses"
[c6e9faf]1938msgstr "Пикеты"
[859d2937]1939
1940#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1941#. "survey stations".
[31f1db0]1942#: ../src/printwx.cc:464
[859d2937]1943#: n:262
1944msgid "Underground Survey Legs"
[c6e9faf]1945msgstr "Подземные замеры"
[859d2937]1946
[31f1db0]1947#: ../src/printwx.cc:494
[859d2937]1948#: n:393
1949msgid "Cross-sections"
[07e28a3]1950msgstr "Сечения"
[859d2937]1951
[31f1db0]1952#: ../src/printwx.cc:499
[859d2937]1953#: n:394
1954msgid "Walls"
[c6e9faf]1955msgstr "Стены ходов"
[859d2937]1956
[31f1db0]1957#: ../src/printwx.cc:503
[859d2937]1958#: n:395
1959msgid "Passages"
1960msgstr ""
1961
[31f1db0]1962#: ../src/printwx.cc:507
[859d2937]1963#: n:421
1964msgid "Origin in centre"
1965msgstr ""
1966
[31f1db0]1967#: ../src/printwx.cc:511
[859d2937]1968#: n:422
1969msgid "Full coordinates"
[c6e9faf]1970msgstr "Полные координаты"
[859d2937]1971
1972#. TRANSLATORS: Used in the print dialog:
[31f1db0]1973#: ../src/printwx.cc:445
[859d2937]1974#: n:263
1975msgid "Tilt angle"
[c6e9faf]1976msgstr "Угол наклона"
[859d2937]1977
[a665282]1978#. TRANSLATORS: used in the print dialog - controls drawing lines
1979#. around each page
[31f1db0]1980#: ../src/printwx.cc:519
[859d2937]1981#: n:264
1982msgid "Page Borders"
[c6e9faf]1983msgstr "Границы страницы"
[859d2937]1984
[a665282]1985#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
1986#. controls drawing the box at the lower left with survey name, view
1987#. angles, etc
[31f1db0]1988#: ../src/printwx.cc:530
[859d2937]1989#: n:265
1990msgid "Legend"
[c6e9faf]1991msgstr "Условные обозначения"
[859d2937]1992
[a665282]1993#. TRANSLATORS: will be used in the print dialog - check this to print
1994#. blank pages (otherwise they’ll be skipped to save paper)
[31f1db0]1995#: ../src/printwx.cc:525
[859d2937]1996#: n:266
1997msgid "Blank Pages"
[c6e9faf]1998msgstr "Пустые страницы"
[859d2937]1999
2000#. TRANSLATORS: Items in the "View" menu:
[31f1db0]2001#: ../src/mainfrm.cc:883
[859d2937]2002#: n:270
2003msgid "Station &Names\tCtrl+N"
[c6e9faf]2004msgstr "&Названия пикетов\tCtrl+N"
[859d2937]2005
2006#. TRANSLATORS: Toggles drawing of 3D passages
[31f1db0]2007#: ../src/mainfrm.cc:885
[859d2937]2008#: n:346
2009msgid "Passage &Tubes\tCtrl+T"
2010msgstr ""
2011
[31f1db0]2012#: ../src/mainfrm.cc:886
[859d2937]2013#: n:271
2014msgid "&Crosses\tCtrl+X"
[c6e9faf]2015msgstr "&Пикеты\tCtrl+X"
[859d2937]2016
[31f1db0]2017#: ../src/mainfrm.cc:887
[859d2937]2018#: n:297
2019msgid "&Grid\tCtrl+G"
2020msgstr "&Сетка\tCtrl+G"
2021
[31f1db0]2022#: ../src/mainfrm.cc:888
[859d2937]2023#: n:318
2024msgid "&Bounding Box\tCtrl+B"
[c6e9faf]2025msgstr "&Вмещающий прямоугольник\tCtrl+B"
[859d2937]2026
2027#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2028#. "survey stations".
[31f1db0]2029#: ../src/mainfrm.cc:892
[859d2937]2030#: n:272
2031msgid "&Underground Survey Legs\tCtrl+L"
2032msgstr ""
2033
2034#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2035#. "survey stations".
[31f1db0]2036#: ../src/mainfrm.cc:895
[859d2937]2037#: n:291
2038msgid "&Surface Survey Legs\tCtrl+F"
2039msgstr ""
2040
[31f1db0]2041#: ../src/mainfrm.cc:904
[859d2937]2042#: n:273
2043msgid "&Overlapping Names"
[c6e9faf]2044msgstr "П&ерекрывающиеся надписи"
[859d2937]2045
[a7d4233]2046#: ../src/gfxcore.cc:3323
[31f1db0]2047#: ../src/mainfrm.cc:905
[859d2937]2048#: n:292
2049msgid "Colour by &Depth"
[c6e9faf]2050msgstr "Раскраска по &глубине"
[859d2937]2051
[a7d4233]2052#: ../src/gfxcore.cc:3324
[31f1db0]2053#: ../src/mainfrm.cc:906
[859d2937]2054#: n:293
2055msgid "Colour by D&ate"
[c6e9faf]2056msgstr "Раскраска по &дате"
[859d2937]2057
[a7d4233]2058#: ../src/gfxcore.cc:3325
[31f1db0]2059#: ../src/mainfrm.cc:907
[859d2937]2060#: n:289
2061msgid "Colour by E&rror"
[c6e9faf]2062msgstr "Раскраска по &ошибкам на кольцах"
[859d2937]2063
[31f1db0]2064#: ../src/mainfrm.cc:909
[859d2937]2065#: n:294
2066msgid "Highlight &Entrances"
[c6e9faf]2067msgstr "Подсветить в&ходы"
[859d2937]2068
[31f1db0]2069#: ../src/mainfrm.cc:910
[859d2937]2070#: n:295
2071msgid "Highlight &Fixed Points"
[c6e9faf]2072msgstr "Подсветить &фиксированные точки"
[859d2937]2073
[31f1db0]2074#: ../src/mainfrm.cc:911
[859d2937]2075#: n:296
2076msgid "Highlight E&xported Points"
[c6e9faf]2077msgstr "Подсветить &экспортированные точки"
[859d2937]2078
[31f1db0]2079#: ../src/printwx.cc:482
[859d2937]2080#: n:418
2081msgid "Entrances"
2082msgstr "Входы"
2083
[31f1db0]2084#: ../src/printwx.cc:486
[859d2937]2085#: n:419
2086msgid "Fixed Points"
[c6e9faf]2087msgstr "Фиксированные точки"
[859d2937]2088
[31f1db0]2089#: ../src/printwx.cc:490
[859d2937]2090#: n:420
2091msgid "Exported Stations"
[c6e9faf]2092msgstr "Экспортированные пикеты"
[859d2937]2093
[31f1db0]2094#: ../src/mainfrm.cc:916
[859d2937]2095#: n:237
2096msgid "&Perspective"
2097msgstr ""
2098
[31f1db0]2099#: ../src/mainfrm.cc:918
[859d2937]2100#: n:238
2101msgid "Textured &Walls"
[c6e9faf]2102msgstr "Текстурированные &стены"
[859d2937]2103
[a665282]2104#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2105#. using that term instead if it gives a better translation which most
2106#. users will understand.
[31f1db0]2107#: ../src/mainfrm.cc:922
[859d2937]2108#: n:239
2109msgid "Fade Distant Ob&jects"
[c6e9faf]2110msgstr "Затенять отдаленные об&ъекты"
[859d2937]2111
2112#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2113#. "survey stations".
[31f1db0]2114#: ../src/mainfrm.cc:925
[859d2937]2115#: n:298
2116msgid "Smoot&hed Survey Legs"
[8384422]2117msgstr "Сглажи&вать линии"
[859d2937]2118
[31f1db0]2119#: ../src/mainfrm.cc:931
2120#: ../src/mainfrm.cc:935
[859d2937]2121#: n:356
2122msgid "Full Screen &Mode\tF11"
[c6e9faf]2123msgstr "Полноэкранный ре&жим\tF11"
[859d2937]2124
[31f1db0]2125#: ../src/mainfrm.cc:949
[859d2937]2126#: n:274
2127msgid "&Compass"
[94e25ff]2128msgstr "&Компас"
[859d2937]2129
[31f1db0]2130#: ../src/mainfrm.cc:950
[859d2937]2131#: n:275
2132msgid "C&linometer"
[c6e9faf]2133msgstr "&Угломер"
[859d2937]2134
2135#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2136#. corresponds to which depth, date, survey closure error, etc.
[31f1db0]2137#: ../src/mainfrm.cc:953
[859d2937]2138#: n:276
2139msgid "Colour &Key"
[c6e9faf]2140msgstr "&Цветовая шкала"
[859d2937]2141
[31f1db0]2142#: ../src/mainfrm.cc:954
[859d2937]2143#: n:277
2144msgid "&Scale Bar"
[94e25ff]2145msgstr "&Масштаб"
[859d2937]2146
[31f1db0]2147#: ../src/mainfrm.cc:944
[859d2937]2148#: n:280
2149msgid "&Reverse Sense\tCtrl+R"
[c6e9faf]2150msgstr "&Инвертировать управление\tCtrl+R"
[859d2937]2151
[31f1db0]2152#: ../src/mainfrm.cc:914
2153#: ../src/mainfrm.cc:946
[859d2937]2154#: n:281
2155msgid "&Cancel Measuring Line\tEscape"
2156msgstr ""
2157
[31f1db0]2158#: ../src/mainfrm.cc:955
[859d2937]2159#: n:299
2160msgid "&Indicators"
[8384422]2161msgstr "И&ндикаторы"
[859d2937]2162
[aa430ec]2163#: ../src/z_getopt.c:697
2164#: ../src/z_getopt.c:709
[859d2937]2165#: n:300
2166#, c-format
2167msgid "%s: option “%s” is ambiguous\n"
[94e25ff]2168msgstr "%s: опция “%s” неоднозначна\n"
[859d2937]2169
[aa430ec]2170#: ../src/z_getopt.c:1025
2171#: ../src/z_getopt.c:1036
[859d2937]2172#: n:301
2173#, c-format
2174msgid "%s: option “-W %s” is ambiguous\n"
[94e25ff]2175msgstr "%s: опция “-W %s” неоднозначна\n"
[859d2937]2176
[aa430ec]2177#: ../src/z_getopt.c:753
2178#: ../src/z_getopt.c:757
[859d2937]2179#: n:302
2180#, c-format
2181msgid "%s: option “%c%s” doesn’t allow an argument\n"
[94e25ff]2182msgstr "%s: опция “%c%s” не допускает указания аргумента\n"
[859d2937]2183
[aa430ec]2184#: ../src/z_getopt.c:742
2185#: ../src/z_getopt.c:745
[859d2937]2186#: n:303
2187#, c-format
2188msgid "%s: option “--%s” doesn’t allow an argument\n"
[94e25ff]2189msgstr "%s: опция “--%s” не допускает указания аргумента\n"
[859d2937]2190
[aa430ec]2191#: ../src/z_getopt.c:1060
2192#: ../src/z_getopt.c:1071
[859d2937]2193#: n:304
2194#, c-format
2195msgid "%s: option “-W %s” doesn’t allow an argument\n"
[94e25ff]2196msgstr "%s: опция “-W %s” не допускает указания аргумента\n"
[859d2937]2197
[aa430ec]2198#: ../src/z_getopt.c:792
2199#: ../src/z_getopt.c:804
2200#: ../src/z_getopt.c:1091
2201#: ../src/z_getopt.c:1103
[859d2937]2202#: n:305
2203#, c-format
2204msgid "%s: option “%s” requires an argument\n"
[94e25ff]2205msgstr "%s: опция “%s” требует указания аргумента\n"
[859d2937]2206
[aa430ec]2207#: ../src/z_getopt.c:962
2208#: ../src/z_getopt.c:973
2209#: ../src/z_getopt.c:1156
2210#: ../src/z_getopt.c:1168
[859d2937]2211#: n:306
2212#, c-format
2213msgid "%s: option requires an argument -- %c\n"
[94e25ff]2214msgstr "%s: опция требует аргумент -- %c\n"
[859d2937]2215
[aa430ec]2216#: ../src/z_getopt.c:842
2217#: ../src/z_getopt.c:845
[859d2937]2218#: n:307
2219#, c-format
2220msgid "%s: unrecognized option “--%s”\n"
[94e25ff]2221msgstr "%s: неизвестная опция “--%s”\n"
[859d2937]2222
[aa430ec]2223#: ../src/z_getopt.c:853
2224#: ../src/z_getopt.c:856
[859d2937]2225#: n:308
2226#, c-format
2227msgid "%s: unrecognized option “%c%s”\n"
[94e25ff]2228msgstr "%s: неизвестная опция “%c%s”\n"
[859d2937]2229
[aa430ec]2230#: ../src/z_getopt.c:903
2231#: ../src/z_getopt.c:906
[859d2937]2232#: n:309
2233#, c-format
2234msgid "%s: illegal option -- %c\n"
[94e25ff]2235msgstr "%s: недопустимая опция -- %c\n"
[859d2937]2236
[aa430ec]2237#: ../src/z_getopt.c:912
2238#: ../src/z_getopt.c:915
[859d2937]2239#: n:310
2240#, c-format
2241msgid "%s: invalid option -- %c\n"
[94e25ff]2242msgstr "%s: неверная опция -- %c\n"
[859d2937]2243
[31f1db0]2244#: ../src/mainfrm.cc:869
[859d2937]2245#: n:311
2246msgid "&New Presentation"
2247msgstr ""
2248
[31f1db0]2249#: ../src/mainfrm.cc:870
[859d2937]2250#: n:312
2251msgid "&Open Presentation…"
2252msgstr ""
2253
[31f1db0]2254#: ../src/mainfrm.cc:871
[859d2937]2255#: n:313
2256msgid "&Save Presentation"
2257msgstr ""
2258
[31f1db0]2259#: ../src/mainfrm.cc:872
[859d2937]2260#: n:314
2261msgid "Sa&ve Presentation As…"
2262msgstr ""
2263
2264#. TRANSLATORS: "Mark" as in "Mark this position"
[31f1db0]2265#: ../src/mainfrm.cc:875
[859d2937]2266#: n:315
2267msgid "&Mark"
2268msgstr ""
2269
2270#. TRANSLATORS: "Play" as in "Play back a recording"
[31f1db0]2271#: ../src/mainfrm.cc:877
[859d2937]2272#: n:316
2273msgid "Pla&y"
[b1147af]2274msgstr "&Воспроизвести"
[859d2937]2275
[31f1db0]2276#: ../src/mainfrm.cc:878
[859d2937]2277#: n:317
2278msgid "&Export as Movie…"
2279msgstr ""
2280
[31f1db0]2281#: ../src/mainfrm.cc:2434
[859d2937]2282#: n:331
2283msgid "Export Movie"
2284msgstr ""
2285
[31f1db0]2286#: ../src/mainfrm.cc:370
[859d2937]2287#: n:319
2288msgid "Select an output filename"
2289msgstr ""
2290
[31f1db0]2291#: ../src/mainfrm.cc:367
2292#: ../src/mainfrm.cc:2356
[859d2937]2293#: n:320
2294msgid "Aven presentations"
2295msgstr ""
2296
2297#. TRANSLATORS: title of the save screenshot dialog
[31f1db0]2298#: ../src/mainfrm.cc:1942
[859d2937]2299#: n:321
2300msgid "Save Screenshot"
[b1147af]2301msgstr "Сохранить снимок экрана"
[859d2937]2302
[31f1db0]2303#: ../src/mainfrm.cc:2351
2304#: ../src/mainfrm.cc:2354
[859d2937]2305#: n:322
2306msgid "Select a presentation to open"
2307msgstr ""
2308
[31f1db0]2309#: ../src/mainfrm.cc:449
[859d2937]2310#: n:323
2311#, c-format
2312msgid "Error in format of presentation file “%s”"
2313msgstr ""
2314
[a665282]2315#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2316#. surveying package, so probably shouldn’t be translated
[31f1db0]2317#: ../src/mainfrm.cc:1912
[859d2937]2318#: n:324
2319msgid "Compass PLT files"
2320msgstr ""
2321
[a665282]2322#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2323#. package, so don’t translate it.
[31f1db0]2324#: ../src/mainfrm.cc:1919
[859d2937]2325#: n:325
2326msgid "CMAP XYZ files"
2327msgstr ""
2328
2329#. TRANSLATORS: title of message box
[31f1db0]2330#: ../src/mainfrm.cc:2005
2331#: ../src/mainfrm.cc:2328
2332#: ../src/mainfrm.cc:2345
[859d2937]2333#: n:326
2334msgid "Modified Presentation"
2335msgstr ""
2336
2337#. TRANSLATORS: and the question in that box
[31f1db0]2338#: ../src/mainfrm.cc:2003
2339#: ../src/mainfrm.cc:2327
2340#: ../src/mainfrm.cc:2344
[859d2937]2341#: n:327
2342msgid "The current presentation has been modified.  Abandon unsaved changes?"
2343msgstr ""
2344
[31f1db0]2345#: ../src/mainfrm.cc:2645
2346#: ../src/mainfrm.cc:2656
[859d2937]2347#: n:328
2348msgid "No matches were found."
2349msgstr ""
2350
2351#. TRANSLATORS: "Find stations" button tooltip
[31f1db0]2352#: ../src/mainfrm.cc:1029
[859d2937]2353#: n:332
2354msgid "Find"
2355msgstr "Поиск"
2356
2357#. TRANSLATORS: "Hide stations" button default tooltip
[31f1db0]2358#: ../src/mainfrm.cc:1031
2359#: ../src/mainfrm.cc:2688
[859d2937]2360#: n:333
2361msgid "Hide"
2362msgstr ""
2363
2364#. TRANSLATORS: "Hide stations" button tooltip when stations are found
[31f1db0]2365#: ../src/mainfrm.cc:2649
[859d2937]2366#: n:334
2367#, c-format
2368msgid "Hide %d found stations"
2369msgstr ""
2370
[31f1db0]2371#: ../src/mainfrm.cc:250
2372#: ../src/mainfrm.cc:2093
2373#: ../src/mainfrm.cc:2174
2374#: ../src/mainfrm.cc:2226
[859d2937]2375#: n:335
2376msgid "Altitude"
2377msgstr "Высота"
2378
[a665282]2379#. TRANSLATORS: error if you try to drag multiple files to the aven
2380#. window
[31f1db0]2381#: ../src/mainfrm.cc:727
[859d2937]2382#: n:336
2383msgid "You may only view one 3d file at a time."
2384msgstr ""
2385
[31f1db0]2386#: ../src/mainfrm.cc:956
[859d2937]2387#: n:337
2388msgid "&Side Panel"
2389msgstr ""
2390
[a665282]2391#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2392#. Easting)
[31f1db0]2393#: ../src/mainfrm.cc:2091
2394#: ../src/mainfrm.cc:2113
2395#: ../src/mainfrm.cc:2115
2396#: ../src/mainfrm.cc:2225
[859d2937]2397#: n:338
2398msgid "%.2f E, %.2f N"
2399msgstr ""
2400
2401#. TRANSLATORS: Used in Aven:
2402#. From <stationname>
2403#. H: 123.45m V: 234.56m
2404#. Dist: 456.78m  Brg: 200
[31f1db0]2405#: ../src/mainfrm.cc:2133
2406#: ../src/mainfrm.cc:2183
2407#: ../src/mainfrm.cc:2245
[859d2937]2408#: n:339
2409#, c-format
2410msgid "From %s"
2411msgstr ""
2412
2413#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
[31f1db0]2414#: ../src/mainfrm.cc:2258
[859d2937]2415#: n:340
2416#, c-format
2417msgid "H %.2f%s, V %.2f%s"
2418msgstr ""
2419
[a665282]2420#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2421#. in Compass bearing)
[31f1db0]2422#: ../src/mainfrm.cc:2270
[859d2937]2423#: n:341
2424#, c-format
2425msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2426msgstr ""
2427
[a720caa]2428#. TRANSLATORS: tickable menu item in View menu.
[a7d4233]2429#.
2430#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
2431#: ../src/gfxcore.cc:3314
2432#: ../src/gfxcore.cc:3332
[31f1db0]2433#: ../src/mainfrm.cc:958
[859d2937]2434#: n:342
2435msgid "&Metric"
2436msgstr ""
2437
2438#. TRANSLATORS: tickable menu item in View menu.
[a665282]2439#.
2440#. Degrees are the angular measurement where there are 360 in a full
2441#. circle.
[a7d4233]2442#: ../src/gfxcore.cc:3276
2443#: ../src/gfxcore.cc:3294
[31f1db0]2444#: ../src/mainfrm.cc:959
[859d2937]2445#: n:343
2446msgid "&Degrees"
2447msgstr ""
2448
2449#. TRANSLATORS: tickable menu item in View menu.
[a665282]2450#.
2451#. Show the tilt of the survey as a percentage gradient (100% = 45
2452#. degrees = 50 grad).
[a7d4233]2453#: ../src/gfxcore.cc:3299
[31f1db0]2454#: ../src/mainfrm.cc:960
[859d2937]2455#: n:430
2456msgid "&Percent"
[07e28a3]2457msgstr "&Печать"
[859d2937]2458
[a665282]2459#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2460#. used e.g.  "5km".
2461#.
2462#. If there should be a space between the number and this, include
2463#. one in the translation.
[a7d4233]2464#: ../src/gfxcore.cc:1146
[31f1db0]2465#: ../src/printwx.cc:1110
[859d2937]2466#: n:423
2467msgid "km"
2468msgstr "км"
2469
[a665282]2470#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2471#. e.g. "10m".
[859d2937]2472#.
[a665282]2473#. If there should be a space between the number and this, include
2474#. one in the translation.
[a720caa]2475#: ../src/gfxcore.cc:1018
[a7d4233]2476#: ../src/gfxcore.cc:1153
[31f1db0]2477#: ../src/mainfrm.cc:2082
2478#: ../src/mainfrm.cc:2149
2479#: ../src/mainfrm.cc:2169
2480#: ../src/mainfrm.cc:2218
2481#: ../src/mainfrm.cc:2249
2482#: ../src/printwx.cc:1112
[859d2937]2483#: n:424
2484msgid "m"
2485msgstr "м"
2486
[a665282]2487#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2488#. used e.g.  "50cm".
[859d2937]2489#.
[a665282]2490#. If there should be a space between the number and this, include
2491#. one in the translation.
[a7d4233]2492#: ../src/gfxcore.cc:1161
[31f1db0]2493#: ../src/printwx.cc:1115
[859d2937]2494#: n:425
2495msgid "cm"
2496msgstr "см"
2497
[a665282]2498#. TRANSLATORS: abbreviation for "miles" (unit of length,
2499#. plural), used e.g.  "2 miles".
[859d2937]2500#.
[a665282]2501#. If there should be a space between the number and this,
2502#. include one in the translation.
[a7d4233]2503#: ../src/gfxcore.cc:1174
[859d2937]2504#: n:426
2505msgid " miles"
2506msgstr ""
2507
[a665282]2508#. TRANSLATORS: abbreviation for "mile" (unit of length,
2509#. singular), used e.g.  "1 mile".
[859d2937]2510#.
[a665282]2511#. If there should be a space between the number and this,
2512#. include one in the translation.
[a7d4233]2513#: ../src/gfxcore.cc:1181
[859d2937]2514#: n:427
2515msgid " mile"
2516msgstr ""
2517
[a665282]2518#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2519#. as "10ft".
[859d2937]2520#.
[a665282]2521#. If there should be a space between the number and this, include
2522#. one in the translation.
[a720caa]2523#: ../src/gfxcore.cc:1018
[a7d4233]2524#: ../src/gfxcore.cc:1189
[31f1db0]2525#: ../src/mainfrm.cc:2087
2526#: ../src/mainfrm.cc:2152
2527#: ../src/mainfrm.cc:2172
2528#: ../src/mainfrm.cc:2223
2529#: ../src/mainfrm.cc:2254
[859d2937]2530#: n:428
2531msgid "ft"
2532msgstr "футов"
2533
[a665282]2534#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2535#. e.g. as "6in".
[859d2937]2536#.
[a665282]2537#. If there should be a space between the number and this, include
2538#. one in the translation.
[a7d4233]2539#: ../src/gfxcore.cc:1197
[859d2937]2540#: n:429
2541msgid "in"
2542msgstr ""
2543
2544#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
[a7d4233]2545#: ../src/gfxcore.cc:3271
[859d2937]2546#: n:387
2547msgid "&Hide Compass"
2548msgstr ""
2549
2550#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
[a7d4233]2551#: ../src/gfxcore.cc:3289
[859d2937]2552#: n:384
2553msgid "&Hide Clino"
2554msgstr ""
2555
2556#. TRANSLATORS: Menu item which turns off the scale bar in aven.
[a7d4233]2557#: ../src/gfxcore.cc:3309
[859d2937]2558#: n:385
2559msgid "&Hide scale bar"
2560msgstr ""
2561
2562#. TRANSLATORS: Menu item which turns off the colour key.
2563#. The "Colour Key" is the thing in aven showing which colour
2564#. corresponds to which depth, date, survey closure error, etc.
[a7d4233]2565#: ../src/gfxcore.cc:3330
[859d2937]2566#: n:386
2567msgid "&Hide colour key"
2568msgstr ""
2569
[a665282]2570#. TRANSLATORS: degree symbol - probably should be translated to
2571#. itself.
[a720caa]2572#: ../src/gfxcore.cc:693
2573#: ../src/gfxcore.cc:768
[31f1db0]2574#: ../src/mainfrm.cc:2136
2575#: ../src/mainfrm.cc:2262
2576#: ../src/printwx.cc:1001
[a7d4233]2577#: ../src/printwx.cc:1029
2578#: ../src/printwx.cc:1033
[31f1db0]2579#: ../src/printwx.cc:1037
2580#: ../src/printwx.cc:1047
[859d2937]2581#: n:344
2582msgid "°"
2583msgstr "°"
2584
[a665282]2585#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2586#. circle).
[a720caa]2587#: ../src/gfxcore.cc:698
2588#: ../src/gfxcore.cc:773
[859d2937]2589#: n:76
2590msgid "ᵍ"
2591msgstr "ᵍ"
2592
[a665282]2593#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2594#. full circle).  Try to make this as short as sensibly possible.
[859d2937]2595#.
2596#. E.g. in Italian and Spanish we use "g.cent." rather than
2597#. "gradi quattrocentesimali"/"grados centesimales"
[31f1db0]2598#: ../src/mainfrm.cc:2144
2599#: ../src/mainfrm.cc:2265
[859d2937]2600#: n:345
2601msgid "grad"
[b1147af]2602msgstr "град"
[859d2937]2603
[11f3c9a]2604#. TRANSLATORS: symbol for percentage gradient (100% = 45
2605#. degrees = 50 grad).
[a720caa]2606#: ../src/gfxcore.cc:759
2607#: ../src/gfxcore.cc:777
[859d2937]2608#: n:96
2609msgid "%"
2610msgstr "%"
2611
[a7d4233]2612#. TRANSLATORS: infinity symbol - used for the percentage gradient on
[11f3c9a]2613#. vertical angles.
[a720caa]2614#: ../src/gfxcore.cc:753
[859d2937]2615#: n:431
2616msgid "∞"
2617msgstr "∞"
2618
[31f1db0]2619#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2620#. in Compass bearing)
2621#: ../src/mainfrm.cc:2156
2622#: n:374
2623#, c-format
2624msgid "%s: H %.2f%s, Brg %03d%s"
2625msgstr ""
[859d2937]2626
[31f1db0]2627#. TRANSLATORS: "V" is short for "Vertical"
2628#: ../src/mainfrm.cc:2189
2629#: n:375
2630#, c-format
2631msgid "%s: V %.2f%s"
2632msgstr ""
[859d2937]2633
[31f1db0]2634#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2635#. tree hierarchy of survey station names
2636#: ../src/mainfrm.cc:1079
2637#: n:376
2638msgid "Surveys"
2639msgstr ""
[859d2937]2640
[31f1db0]2641#: ../src/mainfrm.cc:1080
2642#: n:377
2643msgid "Presentation"
2644msgstr ""
[859d2937]2645
[31f1db0]2646#: ../src/mainfrm.cc:248
2647#: n:378
2648msgid "Easting"
2649msgstr ""
[859d2937]2650
[31f1db0]2651#: ../src/mainfrm.cc:249
[859d2937]2652#: n:379
2653msgid "Northing"
2654msgstr ""
2655
[31f1db0]2656#: ../src/mainfrm.cc:798
[859d2937]2657#: n:380
2658msgid "&Print…\tCtrl+P"
[d5b33cb]2659msgstr "&Печать…\tCtrl+P"
[859d2937]2660
[31f1db0]2661#: ../src/mainfrm.cc:799
[859d2937]2662#: n:381
2663msgid "P&age Setup…"
[d5b33cb]2664msgstr "&Настройки страницы…"
[859d2937]2665
[31f1db0]2666#: ../src/mainfrm.cc:803
[859d2937]2667#: n:382
2668msgid "&Export as…"
2669msgstr ""
2670
[a665282]2671#. TRANSLATORS: Title of file dialog to choose name and type of exported
2672#. file.
[31f1db0]2673#: ../src/printwx.cc:635
[859d2937]2674#: n:401
2675msgid "Export as:"
2676msgstr ""
2677
[a665282]2678#. TRANSLATORS: Title of the export
2679#. dialog
[31f1db0]2680#: ../src/printwx.cc:312
[859d2937]2681#: n:383
2682msgid "Export"
2683msgstr ""
2684
2685#. TRANSLATORS: for about box:
[a7d4233]2686#: ../src/aboutdlg.cc:149
[859d2937]2687#: n:390
2688msgid "System Information:"
2689msgstr ""
2690
2691#. TRANSLATORS: Title of the print preview dialog
[31f1db0]2692#: ../src/printwx.cc:672
[859d2937]2693#: n:398
2694msgid "Print Preview"
[d5b33cb]2695msgstr "Предварительный просмотр печати"
[859d2937]2696
[a665282]2697#. TRANSLATORS: Title of the print
2698#. dialog
[31f1db0]2699#: ../src/printwx.cc:309
[859d2937]2700#: n:399
2701msgid "Print"
[d5b33cb]2702msgstr "Печать"
[859d2937]2703
[31f1db0]2704#: ../src/printwx.cc:583
[859d2937]2705#: n:400
2706msgid "&Print…"
[d5b33cb]2707msgstr "&Печать…"
[859d2937]2708
2709#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2710#. "survey stations".
[31f1db0]2711#: ../src/printwx.cc:470
[859d2937]2712#: n:403
2713msgid "Sur&face Survey Legs"
2714msgstr ""
2715
2716#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
[31f1db0]2717#: ../src/mainfrm.cc:135
[859d2937]2718#: n:404
2719msgid "Edit Waypoint"
2720msgstr ""
2721
[a665282]2722#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2723#. in a presentation.
[31f1db0]2724#: ../src/mainfrm.cc:174
[859d2937]2725#: n:278
2726msgid " (unused in perspective view)"
2727msgstr ""
2728
[a665282]2729#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2730#. presentation.
[31f1db0]2731#: ../src/mainfrm.cc:181
[859d2937]2732#: n:279
2733msgid "Time: "
2734msgstr ""
2735
[a665282]2736#. TRANSLATORS: units+info after time field in dialog to edit a
2737#. waypoint in a presentation.
[31f1db0]2738#: ../src/mainfrm.cc:185
[859d2937]2739#: n:282
2740msgid " secs (0 = auto; *6 = 6 times auto)"
2741msgstr ""
2742
[a665282]2743#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2744#. perhaps by "Survex" or other things in future).
2745#: ../src/aven.cc:230
[859d2937]2746#: n:405
2747#, c-format
2748msgid "This version of %s requires OpenGL to work, but it isn’t available."
2749msgstr ""
2750
2751#. TRANSLATORS: for diffpos:
[a665282]2752#: ../src/diffpos.c:159
[859d2937]2753#: n:500
2754#, c-format
2755msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2756msgstr ""
2757
2758#. TRANSLATORS: for diffpos:
[a665282]2759#: ../src/diffpos.c:196
[859d2937]2760#: n:501
2761#, c-format
2762msgid "Added: %s"
2763msgstr ""
2764
2765#. TRANSLATORS: for diffpos:
[a665282]2766#: ../src/diffpos.c:219
[859d2937]2767#: n:502
2768#, c-format
2769msgid "Deleted: %s"
2770msgstr ""
2771
[a665282]2772#. TRANSLATORS: for extend: the user specified breaking a loop or
2773#. changing extend direction at this station, but we didn’t find it in
2774#. the 3d file
[a7d4233]2775#: ../src/extend.c:263
2776#: ../src/extend.c:281
2777#: ../src/extend.c:326
2778#: ../src/extend.c:368
2779#: ../src/extend.c:410
[859d2937]2780#: n:510
2781#, c-format
2782msgid "Failed to find station %s"
2783msgstr ""
2784
[a665282]2785#. TRANSLATORS: for extend: the user specified breaking a loop or
2786#. changing extend direction at this leg, but we didn’t find it in the
2787#. 3d file
[a7d4233]2788#: ../src/extend.c:307
2789#: ../src/extend.c:349
2790#: ../src/extend.c:391
2791#: ../src/extend.c:433
[859d2937]2792#: n:511
2793#, c-format
2794msgid "Failed to find leg %s → %s"
2795msgstr ""
2796
[a665282]2797#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
[a7d4233]2798#: ../src/extend.c:254
[859d2937]2799#: n:512
2800#, c-format
2801msgid "Starting from station %s"
2802msgstr ""
2803
2804#. TRANSLATORS: for extend:
[a7d4233]2805#: ../src/extend.c:274
[859d2937]2806#: n:513
2807#, c-format
2808msgid "Extending to the left from station %s"
2809msgstr ""
2810
2811#. TRANSLATORS: for extend:
[a7d4233]2812#: ../src/extend.c:319
[859d2937]2813#: n:514
2814#, c-format
2815msgid "Extending to the right from station %s"
2816msgstr ""
2817
2818#. TRANSLATORS: for extend:
[a7d4233]2819#: ../src/extend.c:294
[859d2937]2820#: n:515
2821#, c-format
2822msgid "Extending to the left from leg %s → %s"
2823msgstr ""
2824
2825#. TRANSLATORS: for extend:
[a7d4233]2826#: ../src/extend.c:339
[859d2937]2827#: n:516
2828#, c-format
2829msgid "Extending to the right from leg %s → %s"
2830msgstr ""
2831
2832#. TRANSLATORS: for extend:
[a7d4233]2833#: ../src/extend.c:403
[859d2937]2834#: n:517
2835#, c-format
2836msgid "Breaking survey loop at station %s"
2837msgstr ""
2838
2839#. TRANSLATORS: for extend:
[a7d4233]2840#: ../src/extend.c:423
[859d2937]2841#: n:518
2842#, c-format
2843msgid "Breaking survey loop at leg %s → %s"
2844msgstr ""
2845
2846#. TRANSLATORS: for extend:
[a7d4233]2847#: ../src/extend.c:361
[859d2937]2848#: n:519
2849#, c-format
2850msgid "Swapping extend direction from station %s"
2851msgstr ""
2852
2853#. TRANSLATORS: for extend:
[a7d4233]2854#: ../src/extend.c:381
[859d2937]2855#: n:520
2856#, c-format
2857msgid "Swapping extend direction from leg %s → %s"
2858msgstr ""
2859
2860#. TRANSLATORS: for extend:
[a7d4233]2861#: ../src/extend.c:551
[859d2937]2862#: n:521
2863#, c-format
2864msgid "Applying specfile: “%s”"
2865msgstr ""
2866
2867#. TRANSLATORS: for extend:
2868#. Used to tell the user that a file is being written - %s is the filename
[a7d4233]2869#: ../src/extend.c:614
[859d2937]2870#: n:522
2871#, c-format
2872msgid "Writing %s…"
2873msgstr ""
2874
2875#: ../src/findentrances.cc:100
2876#: ../src/gpx.cc:70
[aa430ec]2877#: ../src/kml.cc:69
[859d2937]2878#: n:287
2879#, c-format
2880msgid "Failed to initialise input coordinate system “%s”"
2881msgstr ""
2882
2883#: ../src/findentrances.cc:103
[11f3c9a]2884#: ../src/gpx.cc:75
[aa430ec]2885#: ../src/kml.cc:74
[859d2937]2886#: n:288
2887#, c-format
2888msgid "Failed to initialise output coordinate system “%s”"
2889msgstr ""
2890
[11f3c9a]2891#: ../src/findentrances.cc:158
[859d2937]2892#: n:388
2893msgid "-d PROJ_DATUM 3D_FILE"
2894msgstr ""
2895
[a665282]2896#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2897#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
2898#. what the input datum is.
[11f3c9a]2899#: ../src/findentrances.cc:149
[859d2937]2900#: n:389
2901msgid "input datum as string to pass to PROJ"
2902msgstr ""
2903
[11f3c9a]2904#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2905#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
2906#. of the coordinate projection in use, the user must specify it here for
2907#. export formats which need to know it (e.g. GPX).
[31f1db0]2908#: ../src/printwx.cc:544
[11f3c9a]2909#: n:440
2910msgid "Coordinate projection"
2911msgstr ""
2912
[a7d4233]2913#: ../src/readval.c:341
[859d2937]2914#: n:392
2915msgid "Separator in survey name"
2916msgstr ""
2917
[a720caa]2918#. TRANSLATORS: Used in place of the station name when talking about an
2919#. anonymous station.
[31f1db0]2920#: ../src/labelinfo.h:82
[a720caa]2921#: n:56
2922msgid "anonymous station"
2923msgstr ""
2924
[859d2937]2925#: ../src/readval.c:124
2926#: ../src/readval.c:139
2927#: ../src/readval.c:156
2928#: n:3
2929msgid "Can't have a leg between two anonymous stations"
2930msgstr ""
2931
[a665282]2932#: ../src/dump3d.c:52
[859d2937]2933#: n:396
2934msgid "show survey date information (if present)"
2935msgstr ""
2936
[31f1db0]2937#: ../src/mainfrm.cc:901
[859d2937]2938#: n:406
2939msgid "Spla&y Legs"
2940msgstr ""
2941
[31f1db0]2942#: ../src/mainfrm.cc:898
[859d2937]2943#: n:407
2944msgid "&Hide"
2945msgstr ""
2946
[31f1db0]2947#: ../src/mainfrm.cc:899
[859d2937]2948#: n:408
2949msgid "&Fade"
2950msgstr ""
2951
[31f1db0]2952#: ../src/mainfrm.cc:900
[859d2937]2953#: n:409
2954msgid "&Show"
2955msgstr "&Показать"
2956
[31f1db0]2957#: ../src/cad3d.c:661
2958#: n:100
2959msgid "do not generate station markers"
2960msgstr ""
2961
2962#: ../src/cad3d.c:662
2963#: n:101
2964msgid "do not generate station labels"
2965msgstr "не создавать подписи названий пикетов"
2966
2967#: ../src/cad3d.c:663
2968#: n:102
2969msgid "do not generate survey legs"
2970msgstr "не создавать линии замеров"
2971
2972#: ../src/cad3d.c:667
2973#: n:103
2974msgid "produce an elevation view"
2975msgstr "создать разрез"
2976
2977#: ../src/cad3d.c:664
2978#: n:148
2979#, c-format
2980msgid "generate grid (default %sm)"
2981msgstr "создавать сетку (по умолчанию %sм)"
2982
2983#: ../src/cad3d.c:665
2984#: n:149
2985#, c-format
2986msgid "station labels text height (default %s)"
2987msgstr "высота текста для подписей имен пикетов (по умолчанию %s)"
2988
2989#: ../src/cad3d.c:666
2990#: n:152
2991#, c-format
2992msgid "station marker size (default %s)"
2993msgstr "размер значка пикета (по умолчанию %s)"
2994
2995#: ../src/cad3d.c:668
2996#: n:155
2997#, c-format
2998msgid "factor to scale down by (default %s)"
2999msgstr ""
3000
3001#: ../src/cad3d.c:669
3002#: n:156
3003msgid "produce DXF output"
3004msgstr ""
3005
3006#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
3007#. translated.
3008#: ../src/cad3d.c:672
3009#: n:158
3010msgid "produce Skencil output"
3011msgstr ""
3012
3013#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
3014#. so should not be translated.
3015#: ../src/cad3d.c:675
3016#: n:159
3017msgid "produce Compass PLT output for Carto"
[859d2937]3018msgstr ""
[31f1db0]3019
3020#: ../src/cad3d.c:676
3021#: n:160
3022msgid "produce SVG output"
3023msgstr ""
3024
3025#, c-format
3026#~ msgid "Error in format of font file “%s”"
3027#~ msgstr "Ошибка в формате файла шрифтов “%s”"
3028
3029#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
3030#. height values).
3031#~ msgid "Select a terrain file to view"
3032#~ msgstr "Выберите файл с рельефом поверхности для отображения"
3033
3034#~ msgid "Terrain files"
3035#~ msgstr "Файлы рельефа поверхности"
3036
3037#~ msgid "Open &Terrain…"
3038#~ msgstr ""
3039
3040#~ msgid "Solid Su&rface"
3041#~ msgstr ""
3042
3043#. TRANSLATORS: number of stations found matching search
3044#, c-format
3045#~ msgid "%d found"
3046#~ msgstr ""
3047
3048#: ../src/mainfrm.cc:939
3049#: n:347
3050#~ msgid "&Preferences…"
3051#~ msgstr "&Настройки…"
3052
3053#: n:348
3054#~ msgid "Draw passage walls"
3055#~ msgstr ""
3056
3057#: n:349
3058#~ msgid "Estimate LRUD readings based on heuristics"
3059#~ msgstr ""
3060
3061#: n:350
3062#~ msgid "Mark survey stations with crosses"
3063#~ msgstr ""
3064
3065#: n:351
3066#~ msgid "Highlight stations marked as entrances"
3067#~ msgstr ""
3068
3069#: n:352
3070#~ msgid "Highlight stations marked as fixed points"
3071#~ msgstr ""
3072
3073#: n:353
3074#~ msgid "Highlight stations which are exported"
3075#~ msgstr ""
3076
3077#: n:354
3078#~ msgid "Mark survey stations with their names"
3079#~ msgstr ""
3080
3081#: n:355
3082#~ msgid "Allow names to overlap on the display (faster)"
3083#~ msgstr ""
3084
3085#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3086#. "survey stations".
3087#: n:357
3088#~ msgid "Display underground survey legs"
3089#~ msgstr ""
3090
3091#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3092#. "survey stations".
3093#: n:358
3094#~ msgid "Display surface survey legs"
3095#~ msgstr ""
3096
3097#: n:359
3098#~ msgid "Colour surface surveys by depth"
3099#~ msgstr ""
3100
3101#: n:360
3102#~ msgid "Draw surface legs with dashed lines"
3103#~ msgstr ""
3104
3105#: n:361
3106#~ msgid "Draw a grid"
3107#~ msgstr "Рисовать сетку"
3108
3109#: n:362
3110#~ msgid "metric units"
3111#~ msgstr ""
3112
3113#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
3114#. the USA (rather confusingly now that England has largely gone metric!)
3115#: n:363
3116#~ msgid "imperial units"
3117#~ msgstr ""
3118
3119#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
3120#. full circle.
3121#: n:364
3122#~ msgid "degrees (°)"
3123#~ msgstr ""
3124
3125#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
3126#. full circle.
3127#: n:365
3128#~ msgid "grads"
3129#~ msgstr ""
3130
3131#: n:366
3132#~ msgid "Display measurements in"
3133#~ msgstr ""
3134
3135#: n:367
3136#~ msgid "Display angles in"
3137#~ msgstr ""
3138
3139#. TRANSLATORS: reverses the sense of the mouse controls
3140#: n:368
3141#~ msgid "Reverse the sense of the controls"
3142#~ msgstr ""
3143
3144#: n:369
3145#~ msgid "Display scale bar"
3146#~ msgstr ""
3147
3148#: n:370
3149#~ msgid "Display depth bar"
3150#~ msgstr ""
3151
3152#: n:371
3153#~ msgid "Display compass"
3154#~ msgstr ""
3155
3156#: n:372
3157#~ msgid "Display clinometer"
3158#~ msgstr ""
3159
3160#: n:373
3161#~ msgid "Display side panel"
3162#~ msgstr ""
Note: See TracBrowser for help on using the repository browser.