source: git/lib/ro.po @ a770b1bd

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data
Last change on this file since a770b1bd was a770b1bd, checked in by Olly Betts <olly@…>, 10 years ago

lib/: Fill in some missing translations from existing similar
translations.

  • Property mode set to 100644
File size: 71.1 KB
Line 
1msgid ""
2msgstr ""
3"Language: ro\n"
4"Project-Id-Version: survex\n"
5"Report-Msgid-Bugs-To: olly@survex.com\n"
6"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
7"PO-Revision-Date: 2014-01-15 20:38:46 +0000\n"
8"Last-Translator: Olly Betts <olly@survex.com>\n"
9"Language-Team: \n"
10"MIME-Version: 1.0\n"
11"Content-Type: text/plain; charset=utf-8\n"
12"Content-Transfer-Encoding: 8bit\n"
13
14#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex was trying to
15#. allocate space for.
16#: ../src/message.c:83
17#: n:1
18#, c-format
19msgid "Out of memory (couldn’t find %lu bytes)."
20msgstr "Memorie insuficienta (nu am putut gasi %lu bytes)"
21
22#. TRANSLATORS: Feel free to translate as "or newer" instead of "or greater" if that
23#. gives a more natural translation.  It's technically not quite right when there are
24#. parallel active release series (e.g. Survex 1.0.40 was released *after* 1.2.0), but
25#. this seems unlikely to confuse users.
26#: ../src/commands.c:1567
27#: n:2
28#, c-format
29msgid "Survex version %s or greater required to process this survey data."
30msgstr "Este necesara versiunea Survex %s sau superioara pentru procesarea acestor date"
31
32#. TRANSLATORS: Indicates a warning message e.g.:
33#. "spoon.svx:12: warning: *prefix is deprecated"
34#: ../src/aven.cc:367
35#: ../src/message.c:1215
36#: n:4
37msgid "warning"
38msgstr "avertisment"
39
40#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u by
41#. the line number in that file.
42#: ../src/datain.c:105
43#: n:5
44#, c-format
45msgid "In file included from %s:%u:\n"
46msgstr "In fisierul inclus de %s:%u:\n"
47
48#. TRANSLATORS: If you're unsure what "deprecated" means, see:
49#. http://en.wikipedia.org/wiki/Deprecation
50#: ../src/commands.c:535
51#: n:6
52msgid "*prefix is deprecated - use *begin and *end instead"
53msgstr "*prefix contine eroare - folositi in schimb *begin si *end"
54
55#. TRANSLATORS: Here "station" is a survey station, not a train station.
56#: ../src/readval.c:205
57#: n:7
58#, c-format
59msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
60msgstr "Folosirea caracterului “%c” in numele statiei, nu este permisa (folositi *SET NAMES pentru a modifica lista de caractere)"
61
62#: ../src/readval.c:384
63#: n:8
64msgid "Field may not be omitted"
65msgstr "Aceasta rubrica nu poate fi omisa"
66
67#: ../src/datain.c:1470
68#: ../src/datain.c:1750
69#: ../src/readval.c:386
70#: ../src/readval.c:427
71#: ../src/readval.c:457
72#: n:9
73#, c-format
74msgid "Expecting numeric field, found “%s”"
75msgstr "Se asteapta camp numeric, s-a gasit “%s”"
76
77#: ../src/commands.c:1473
78#: n:10
79#, c-format
80msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
81msgstr "S-a gasit “%s”, se astepta “PRESERVE”, “TOUPPER” sau “TOLOWER”"
82
83#: ../src/debug.h:45
84#: ../src/debug.h:47
85#: ../src/matrix.c:359
86#: ../src/message.c:233
87#: n:11
88msgid "Bug in program detected! Please report this to the authors"
89msgstr "Eroare de program! Va rugam anuntati autorii"
90
91#: ../src/commands.c:1681
92#: ../src/extend.c:420
93#: n:12
94#, c-format
95msgid "Unknown command “%s”"
96msgstr "Comanda necunoscuta “%s”"
97
98#. TRANSLATORS: Here "station" is a survey station, not a train station.
99#: ../src/netbits.c:401
100#: n:13
101#, c-format
102msgid "Station “%s” equated to itself"
103msgstr "Statia “%s” este egala cu ea insasi"
104
105#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between survey stations.
106#: ../src/datain.c:998
107#: n:14
108msgid "Compass reading may not be omitted except on plumbed legs"
109msgstr "Valoarea azimutului poate fi omisa doar in cazul vizelor verticale"
110
111#: ../src/datain.c:244
112#: ../src/extend.c:425
113#: n:15
114msgid "End of line not blank"
115msgstr "Sfarsitul liniei nu este gol"
116
117#: ../src/cavern.c:385
118#: n:16
119#, c-format
120msgid "There were %d warning(s)."
121msgstr "Au fost %d avertismente."
122
123#. TRANSLATORS: %s is replaced by the command we attempted to run.
124#: ../src/cavernlog.cc:174
125#: ../src/cavernlog.cc:224
126#: n:17
127#, c-format, fuzzy
128msgid "Couldn’t run external command: “%s”"
129msgstr "Nu s-a putut deschide “pipe”: “%s”"
130
131#: ../src/datain.c:80
132#: ../src/datain.c:88
133#: ../src/datain.c:95
134#: ../src/datain.c:731
135#: ../src/extend.c:543
136#: ../src/sorterr.c:75
137#: ../src/sorterr.c:92
138#: ../src/sorterr.c:234
139#: n:18
140msgid "Error reading file"
141msgstr "Eroare in citirea fisierului"
142
143#: ../src/message.c:1230
144#: n:19
145msgid "Too many errors - giving up"
146msgstr "Prea multe erori - proces intrerupt"
147
148#. TRANSLATORS: If you're unsure what "deprecated" means, see:
149#. http://en.wikipedia.org/wiki/Deprecation
150#: ../src/commands.c:1352
151#: n:20
152msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
153msgstr "*DEFAULT nu mai este folosit - folositi in schimb *CALIBRATE/DATA/SD/UNITS cu argumentul DEFAULT"
154
155#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline (a weight on a string).
156#. So the problem here is that the leg is vertical, so a compass reading has
157#. no meaning!
158#: ../src/datain.c:971
159#: n:21
160msgid "Compass reading given on plumbed leg"
161msgstr "Citire a busolei la o masuratoare verticala"
162
163#: ../src/commands.c:619
164#: n:22
165msgid "END with no matching BEGIN in this file"
166msgstr "END nu are un corespondent BEGIN in acest fisier"
167
168#: ../src/datain.c:718
169#: n:23
170msgid "BEGIN with no matching END in this file"
171msgstr "BEGIN nu are un corespondent END in acest fisier"
172
173#: ../src/datain.c:361
174#: ../src/img.c:178
175#: ../src/printwx.cc:1234
176#: n:24
177#, c-format
178msgid "Couldn’t open data file “%s”"
179msgstr "Nu am reusit deschiderea fisierului de date “%s”"
180
181#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
182#. deprecated, so this error would be generated by:
183#.
184#. *equate \foo.7 1
185#.
186#. If you're unsure what "deprecated" means, see:
187#. http://en.wikipedia.org/wiki/Deprecation
188#: ../src/commands.c:444
189#: ../src/readval.c:90
190#: ../src/readval.c:94
191#: n:25
192msgid "ROOT is deprecated"
193msgstr "ROOT nu se recomanda"
194
195#. TRANSLATORS: A station must be exported out of each level it is in, so this would give
196#. "Station “\outer.inner.1” not exported from survey “\outer”)":
197#. *equate entrance outer.inner.1
198#. *begin outer
199#. *begin inner
200#. *export 1
201#. 1 2 1.23 045 -6
202#. *end inner
203#. *end outer
204#: ../src/commands.c:861
205#: ../src/listpos.c:107
206#: ../src/readval.c:324
207#: n:26
208#, c-format
209msgid "Station “%s” not exported from survey “%s”"
210msgstr "Punctul de statie “%s” nu a fost exportat din masuratoarea “%s”"
211
212#. TRANSLATORS: This error occurs if there's an attempt to export a station
213#. from a survey which doesn't actually exist.
214#: ../src/listpos.c:110
215#: n:286
216#, c-format
217msgid "Reference to station “%s” from non-existent survey “%s”"
218msgstr ""
219
220#: ../src/readval.c:296
221#: n:27
222#, c-format
223msgid "“%s” can’t be both a station and a survey"
224msgstr "“%s” nu poate fi acelasi timp punct de statie si denumire de masuratoare"
225
226#: ../src/extend.c:247
227#: ../src/extend.c:262
228#: ../src/extend.c:302
229#: ../src/extend.c:342
230#: ../src/extend.c:382
231#: ../src/readval.c:202
232#: n:28
233msgid "Expecting station name"
234msgstr "Lipseste numele punctului de statie"
235
236#. TRANSLATORS: FIXME: perhaps use "survey" instead of "prefix level"?
237#.
238#. If you're unsure what "deprecated" means, see:
239#. http://en.wikipedia.org/wiki/Deprecation
240#: ../src/commands.c:507
241#: n:29
242msgid "Reentering an existing prefix level is deprecated"
243msgstr "Reintroducerea unui prefix deja existent nu este recomandata"
244
245#: ../src/commands.c:514
246#: n:30
247msgid "Originally entered here"
248msgstr "Introdus aici in original"
249
250#: ../src/commands.c:1503
251#: n:31
252#, c-format
253msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
254msgstr "S-a gasit “%s” in loc de “EQUATES”, “EXPORTS”, sau “PLUMBS”"
255
256#: ../src/commands.c:1510
257#: n:32
258#, c-format
259msgid "Found “%s”, expecting “ON” or “OFF”"
260msgstr "S-a gasit “%s” in loc de “ON” sau “OFF”"
261
262#. TRANSLATORS: EQUATE is a command name, so shouldn’t be translated.
263#: ../src/commands.c:834
264#: n:33
265msgid "Only one station in EQUATE command"
266msgstr "Doar un punct de statie in comanda EQUATE"
267
268#: ../src/commands.c:398
269#: n:34
270#, c-format
271msgid "Unknown quantity “%s”"
272msgstr "Cantitate necunoscuta “%s”"
273
274#: ../src/commands.c:318
275#: n:35
276#, c-format
277msgid "Unknown units “%s”"
278msgstr "Unitati necunoscute “%s”"
279
280#. TRANSLATORS: Used when a BEGIN tag has no prefix, but the END tag has one, e.g.:
281#. *begin
282#. 1 2 10.00 178 -01
283#. *end entrance      <--[Message given here]
284#: ../src/commands.c:636
285#: n:36
286msgid "Matching BEGIN tag has no prefix"
287msgstr "BEGIN nu are nici un prefix corespondent"
288
289#. TRANSLATORS: Note: In English you talk about the *units* of a single measurement, but
290#. the correct term in other languages may be singular.
291#: ../src/commands.c:328
292#: n:37
293#, c-format
294msgid "Invalid units “%s” for quantity"
295msgstr "Unitate incorecta “%s” pentru cantitate"
296
297#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all errors there take
298#. a filename parameter - we don’t really want it here, so lose it with "%.0s"
299#. (which should display 0 characters from the filename) FIXME: sort out this
300#: ../src/img.c:179
301#: n:38
302msgid "Out of memory %.0s"
303msgstr "Memorie insuficienta %.0s"
304
305#: ../src/commands.c:391
306#: n:39
307#, c-format
308msgid "Unknown instrument “%s”"
309msgstr "Instrument necunoscut “%s”"
310
311#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to translate
312#: ../src/commands.c:1324
313#: n:40
314msgid "Scale factor must be 1.0 for DECLINATION"
315msgstr "Raportul scarii trebuie sa fie 1.0 pentru DECLINATION"
316
317#. TRANSLATORS: If the scale factor for an instrument is zero, then any reading
318#. would be mapped to zero, which doesn't make sense.
319#: ../src/commands.c:1328
320#: n:391
321msgid "Scale factor must be non-zero"
322msgstr "Raportul scarii trebuie sa fie diferit de zero"
323
324#: ../src/commands.c:1371
325#: n:41
326#, c-format
327msgid "Unknown setting “%s”"
328msgstr "Parametru necunoscut “%s”"
329
330#: ../src/commands.c:436
331#: n:42
332#, c-format
333msgid "Unknown character class “%s”"
334msgstr "Clasa de caractere necunoscuta “%s”"
335
336#: ../src/extend.c:589
337#: ../src/netskel.c:89
338#: n:43
339msgid "No survey data"
340msgstr "Lipsesc masuratorile topografice"
341
342#: ../src/filename.c:52
343#: ../src/img.c:180
344#: n:44
345#, c-format
346msgid "Filename “%s” refers to directory"
347msgstr "Fisierul “%s” este un director"
348
349#: ../src/netartic.c:384
350#: n:45
351msgid "Survey not all connected to fixed stations"
352msgstr "Topografia nu este complet conectata la puncte fixate"
353
354#: ../src/commands.c:770
355#: ../src/datain.c:644
356#: n:46
357msgid "Station already fixed or equated to a fixed point"
358msgstr "Punct de statie deja fixat sau echivalat cu un punct fix"
359
360#: ../src/cavern.c:288
361#: ../src/filename.c:55
362#: ../src/img.c:181
363#: n:47
364#, c-format
365msgid "Failed to open output file “%s”"
366msgstr "Nu este posibila deschiderea fisierului “%s”"
367
368#: ../src/commands.c:1426
369#: n:48
370msgid "Standard deviation must be positive"
371msgstr "Deviatia standard trebuie sa fie pozitiva"
372
373#. TRANSLATORS: as in: Usage: cavern …
374#: ../src/cmdline.c:165
375#: n:49
376msgid "Usage"
377msgstr "Folosire"
378
379#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
380#. "survey stations".
381#.
382#. %s is replaced by the name of the station.
383#: ../src/netbits.c:329
384#: n:50
385#, c-format
386msgid "Survey leg with same station (“%s”) at both ends - typing error?"
387msgstr "Masuratoare cu acelasi punct (“%s”) la ambele capete - eroare de transcriere?"
388
389#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
390#. full circle.
391#: ../src/datain.c:924
392#: ../src/datain.c:932
393#: ../src/datain.c:944
394#: n:51
395msgid "Clino reading over 90 degrees (absolute value)"
396msgstr "Valoare a clinometrului peste 90 grade (valoare absoluta)"
397
398#: ../src/netbits.c:416
399#: n:52
400#, c-format
401msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
402msgstr "Tentativa de egalizare a doua puncte de statie fixe diferite: “%s” si “%s”"
403
404#. TRANSLATORS: "equal" as in: *fix a 1 2 3 / *fix b 1 2 3 / *equate a b
405#: ../src/netbits.c:422
406#: n:53
407#, c-format
408msgid "Equating two equal fixed points: “%s” and “%s”"
409msgstr "Egalizare a doua puncte de statie identice “%s” si “%s”"
410
411#. TRANSLATORS: " *fix a " gives this message:
412#: ../src/commands.c:693
413#: n:54
414msgid "FIX command with no coordinates - fixing at (0,0,0)"
415msgstr "Comanda FIX fara coordonate - se atribuie (0,0,0)"
416
417#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
418#: ../src/commands.c:773
419#: ../src/datain.c:646
420#: n:55
421msgid "Station already fixed at the same coordinates"
422msgstr "Punct de statie deja fixat cu aceleasi coordonate"
423
424#: ../src/commands.c:686
425#: n:56
426msgid "More than one FIX command with no coordinates"
427msgstr "Mai mult de o comanda FIX fara coordonate"
428
429#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN <SURVEY>, so this
430#. would generate error 57:
431#. *begin fred
432#. 1 2 1.23 045 -6
433#. *export 2
434#. *end fred
435#: ../src/commands.c:1688
436#: n:57
437msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
438msgstr "*EXPORT trebuie sa urmeze dupa “*BEGIN <TOPOGRAFIE>”"
439
440#: ../src/readval.c:514
441#: n:58
442msgid "Invalid year (< 1900 or > 2078)"
443msgstr "An gresit (< 1900 or > 2078)"
444
445#. TRANSLATORS: Suspicious means something like 410 degrees or -20 degrees
446#: ../src/datain.c:826
447#: ../src/datain.c:835
448#: n:59
449msgid "Suspicious compass reading"
450msgstr "Azimut suspect"
451
452#: ../src/datain.c:1446
453#: n:60
454msgid "Negative tape reading"
455msgstr "Distanta negativa"
456
457#: ../src/commands.c:688
458#: n:61
459msgid "Same station fixed twice with no coordinates"
460msgstr "Acelasi punct de statie fixat de doua ori fara coordonate"
461
462#. TRANSLATORS: This means that the data fed in said this.
463#. It could be a gross error (e.g. the decimal point is missing from
464#. the depth gauge reading) or it could just be due to random error on
465#. a near vertical leg
466#: ../src/datain.c:1145
467#: n:62
468msgid "Tape reading is less than change in depth"
469msgstr "Distanta este mai mica decat difeneta de nivel"
470
471#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
472#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
473#. neither style nor reading is a keyword in the program
474#. This error complains about a depth gauge reading in normal style, for example
475#: ../src/commands.c:1069
476#: n:63
477#, c-format
478msgid "Reading “%s” not allowed in data style “%s”"
479msgstr "Datele “%s” nu sunt permise in campul de date “%s”"
480
481#. TRANSLATORS: i.e. not enough readings for the style.
482#: ../src/commands.c:1238
483#: n:64
484#, c-format
485msgid "Too few readings for data style “%s”"
486msgstr "Lipsesc date pentru campul de date “%s”"
487
488#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
489#: ../src/commands.c:1034
490#: n:65
491#, c-format
492msgid "Data style “%s” unknown"
493msgstr "Tipul de date “%s” necunoscut"
494
495#. TRANSLATORS: Here "station" is a survey station, not a train station.
496#.
497#. Exporting a station twice give error 66:
498#. *begin example
499#. *export 1
500#. *export 1
501#. 1 2 1.24 045 -6
502#. *end example
503#: ../src/commands.c:905
504#: n:66
505#, c-format
506msgid "Station “%s” already exported"
507msgstr "Punctul de statie “%s” este deja exportat"
508
509#. TRANSLATORS: complains about a situation like trying to define two from stations per leg
510#: ../src/commands.c:1089
511#: n:67
512#, c-format
513msgid "Duplicate reading “%s”"
514msgstr "Campul “%s” duplicat"
515
516#: ../src/commands.c:800
517#: n:68
518#, c-format
519msgid "FLAG “%s” unknown"
520msgstr "FLAG “%s” necunoscut"
521
522#: ../src/readval.c:471
523#: n:69
524msgid "Missing \""
525msgstr "Lipseste \""
526
527#. TRANSLATORS: Here "station" is a survey station, not a train station.
528#: ../src/listpos.c:121
529#: n:70
530#, fuzzy, c-format
531msgid "Station “%s” referred to just once, with an explicit prefix - typo?"
532msgstr "Punctul de statie “%s” are o referinta unica, cu un prefix explicit - eroare de scriere?"
533
534#. TRANSLATORS: Here "station" is a survey station, not a train station.
535#: ../src/netartic.c:394
536#: n:71
537msgid "The following survey stations are not attached to a fixed point:"
538msgstr "Urmatoarele puncte de statie nu sunt atasate unui punct fixat"
539
540#: ../src/netskel.c:128
541#: n:72
542#, c-format
543msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
544msgstr "Topografia nu contine puncte fixate. Am fixat %s ca (0,0,0)"
545
546#. TRANSLATORS: fixed survey station that is not part of any survey
547#: ../src/netskel.c:914
548#: n:73
549#, c-format
550msgid "Unused fixed point “%s”"
551msgstr "Punct fix nefolosit “%s”"
552
553#: ../src/matrix.c:123
554#: n:74
555msgid "Network solved by reduction - no simultaneous equations to solve."
556msgstr "Retea rezolvata prin reducere - nici un sistem de ecuatii de rezolvat."
557
558#: ../src/matrix.c:135
559#: n:75
560#, c-format
561msgid "Solving %d simultaneous equations"
562msgstr "Rezolv %d ecuatii simultane"
563
564#: ../src/commands.c:1146
565#: n:77
566#, c-format
567msgid "Reading “%s” duplicates previous reading(s)"
568msgstr "Valoarea “%s” dubleaza campul/campurile precedent/e"
569
570#: ../src/matrix.c:133
571#: n:78
572msgid "Solving one equation"
573msgstr "Rezolv o ecuatie"
574
575#: ../src/datain.c:897
576#: ../src/datain.c:1139
577#: ../src/datain.c:1327
578#: n:79
579msgid "Negative adjusted tape reading"
580msgstr "Distanta corectata negativ"
581
582#: ../src/commands.c:1604
583#: ../src/commands.c:1624
584#: n:80
585msgid "Date is in the future!"
586msgstr "Data se gaseste in viitor!"
587
588#: ../src/commands.c:1628
589#: n:81
590msgid "End of date range is before the start"
591msgstr "Data finala este anterioara datei de inceput"
592
593#: ../src/avenprcore.cc:118
594#: n:82
595#, c-format
596msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
597msgstr "Parametrul “%s” are valoarea incorecta “%s” in fisierul de configurare a imprimantei"
598
599#. TRANSLATORS: e.g. the user specifies a passage cross-section at station "entrance.27", but
600#. there is no station "entrance.27" in the centre-line.
601#: ../src/netskel.c:999
602#: n:83
603#, c-format
604msgid "Cross section specified at non-existent station “%s”"
605msgstr ""
606
607#. TRANSLATORS: In data with backsights, the user has tried to give a plumb for the
608#. foresight and a clino reading for the backsight, or something similar.
609#: ../src/datain.c:958
610#: ../src/datain.c:979
611#: n:84
612msgid "CLINO and BACKCLINO readings must be of the same type"
613msgstr "Citirile CLINO si BACKCLINO trebuie sa fie de acelasi tip."
614
615#: ../src/avenprcore.cc:113
616#: n:85
617#, c-format
618msgid "Parameter “%s” missing in printer configuration file"
619msgstr "Parametrul “%s” lipseste din fisierul de configurare a imprimantei"
620
621#: ../src/readval.c:522
622#: n:86
623msgid "Invalid month"
624msgstr "Luna incorecta"
625
626#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
627#: ../src/readval.c:530
628#: n:87
629msgid "Invalid day of the month"
630msgstr "Zi incorecta"
631
632#: ../src/cavern.c:237
633#: n:88
634#, c-format
635msgid "3d file format versions %d to %d supported"
636msgstr ""
637
638#, c-format
639#~ msgid "Error in format of font file “%s”"
640#~ msgstr "Eroare in formatul fisireului de font “%s”"
641
642#: ../src/readval.c:200
643#: n:89
644msgid "Expecting survey name"
645msgstr "Se asteapta o denumire de topografie"
646
647#. TRANSLATORS: Program will exit shortly after printing this
648#: ../src/message.c:224
649#: n:90
650msgid "Abnormal termination"
651msgstr "Final anormal"
652
653#: ../src/message.c:225
654#: n:91
655msgid "Arithmetic error"
656msgstr "Eroare aritmetica"
657
658#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad opcodes -- corrupted program?
659#: ../src/message.c:226
660#: n:92
661msgid "Illegal instruction"
662msgstr "Instructiune ilegala"
663
664#: ../src/extend.c:538
665#: ../src/mainfrm.cc:376
666#: ../src/sorterr.c:140
667#: n:93
668#, c-format
669msgid "Couldn’t open file “%s”"
670msgstr "Nu am putut deschide fisierul “%s”"
671
672#: ../src/printwx.cc:402
673#: n:402
674#, c-format
675msgid "Couldn’t write file “%s”"
676msgstr ""
677
678#: ../src/message.c:227
679#: n:94
680msgid "Bad memory access"
681msgstr "Acces la memorie eronat"
682
683#. TRANSLATORS: If you're unsure what "deprecated" means, see:
684#. http://en.wikipedia.org/wiki/Deprecation
685#: ../src/commands.c:446
686#: ../src/commands.c:509
687#: ../src/commands.c:537
688#: ../src/commands.c:1049
689#: ../src/commands.c:1354
690#: ../src/readval.c:96
691#: n:95
692#, fuzzy
693msgid "Further uses of this deprecated feature will not be reported"
694msgstr "Folosirea ulterioara a acestei functionalitati ??? nu va fi semnalata"
695
696#: ../src/message.c:228
697#: n:97
698msgid "Unknown signal received"
699msgstr "Semnal necunoscut receptionat"
700
701#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
702#. full circle.
703#: ../src/datain.c:863
704#: n:98
705#, c-format
706msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
707msgstr "Lectura COMPASS si BACKCOMPASS nu concorda cu %s grade"
708
709#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
710#. full circle.
711#: ../src/datain.c:1027
712#: n:99
713#, c-format
714msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
715msgstr "Lectura CLINO si BACKCLINO nu concorda cu %s grade"
716
717#: ../src/cad3d.c:624
718#: n:100
719msgid "do not generate station markers"
720msgstr ""
721
722#: ../src/cad3d.c:625
723#: n:101
724msgid "do not generate station labels"
725msgstr ""
726
727#: ../src/cad3d.c:626
728#: n:102
729msgid "do not generate survey legs"
730msgstr ""
731
732#: ../src/cad3d.c:630
733#: n:103
734msgid "produce an elevation view"
735msgstr ""
736
737#: ../src/commands.c:1046
738#: n:104
739#, c-format
740msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
741msgstr "“*data %s %c …” nu este agreata - folositi “*data %s …” in loc"
742
743#: ../src/extend.c:490
744#: n:105
745msgid "Reading in data - please wait…"
746msgstr "Se citesc datele - va rog asteptati…"
747
748#. TRANSLATORS: Perhaps the user tried to load a different type of file as a
749#. Survex .3d file, or the .3d file was corrupted.
750#: ../src/3dtopos.c:154
751#: ../src/3dtopos.c:160
752#: ../src/cad3d.c:866
753#: ../src/cad3d.c:877
754#: ../src/img.c:182
755#: n:106
756#, c-format
757msgid "Bad 3d image file “%s”"
758msgstr "Fisier imagine 3d “%s” gresit"
759
760#. TRANSLATORS: This is the date format string used to timestamp .3d files
761#. internally.  Probably best to keep it the same for all translations.
762#: ../src/img.c:46
763#: ../src/mainfrm.cc:1316
764#: n:107
765#, c-format
766msgid "%a,%Y.%m.%d %H:%M:%S %Z"
767msgstr "%a,%Y.%m.%d %H:%M:%S %Z"
768
769#. TRANSLATORS: put in .3d file if we can’t read the date/time
770#: ../src/mainfrm.cc:1309
771#: n:108
772msgid "Date and time not available."
773msgstr "Data si ora nu sunt disponibile."
774
775#: ../src/img.c:183
776#: n:109
777#, c-format
778msgid "Error reading from file “%s”"
779msgstr "Eroare in citirea fisierului “%s”"
780
781#: ../src/filename.c:79
782#: ../src/img.c:184
783#: ../src/mainfrm.cc:334
784#: ../src/mainfrm.cc:1803
785#: n:110
786#, c-format
787msgid "Error writing to file “%s”"
788msgstr "Eroare in scrierea fisierului “%s”"
789
790#: ../src/filename.c:82
791#: n:111
792msgid "Error writing to file"
793msgstr "Eroare in scrierea fisierului"
794
795#: ../src/sorterr.c:76
796#: ../src/sorterr.c:93
797#: ../src/sorterr.c:164
798#: n:112
799msgid "Couldn’t parse .err file"
800msgstr "Lectura fisierului .err nu a putut fi realizata"
801
802#: ../src/cavern.c:380
803#: n:113
804#, c-format
805msgid "There were %d warning(s) and %d error(s) - no output files produced."
806msgstr "Au fost %d avertisment(e) si %d eroare(erori) - nu s-a generat nici un fisier."
807
808#: ../src/img.c:185
809#: n:114
810#, c-format
811msgid "File “%s” has a newer format than this program can understand"
812msgstr "Fisierul “%s” are un format prea nou pe care acest program nu il poate intelege"
813
814#: ../src/printwx.cc:700
815#: n:115
816msgid "North"
817msgstr "Nord"
818
819#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
820#: ../src/printwx.cc:724
821#: n:116
822msgid "Elevation on"
823msgstr "Profil in directia"
824
825#: ../src/printwx.cc:294
826#: n:117
827msgid "P&lan view"
828msgstr "&Plan"
829
830#: ../src/printwx.cc:296
831#: n:285
832msgid "&Elevation"
833msgstr "P&rofil"
834
835#: ../src/gfxcore.cc:692
836#: ../src/mainfrm.cc:126
837#: n:118
838msgid "Elevation"
839msgstr "Profil"
840
841#: ../src/cavern.c:342
842#: n:120
843msgid "Calculating statistics"
844msgstr "Calculez statisticile"
845
846#: ../src/readval.c:485
847#: n:121
848msgid "Expecting string field"
849msgstr "Camp de caractere asteptat"
850
851#: ../src/cmdline.c:208
852#: n:122
853msgid "too few arguments"
854msgstr "Parametrii insuficienti"
855
856#: ../src/cmdline.c:215
857#: n:123
858msgid "too many arguments"
859msgstr "Prea multi parametrii"
860
861#: ../src/cmdline.c:174
862#: ../src/cmdline.c:177
863#: ../src/cmdline.c:181
864#: n:124
865msgid "FILE"
866msgstr "FISIER"
867
868#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
869#. "sequence" for the English "traverse", which makes sense (although toporobot
870#. actually uses this term to mean something more specific).  Feel free to
871#. follow this lead if you can't think of a better term - these messages mostly
872#. indicate how processing is progressing.
873#.
874#. A trailing traverse is a dead end back to a junction.
875#: ../src/netskel.c:162
876#: n:125
877msgid "Removing trailing traverses"
878msgstr "Elimin traversele terminale"
879
880#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
881#. "sequence" for the English "traverse", which makes sense (although toporobot
882#. actually uses this term to mean something more specific).  Feel free to
883#. follow this lead if you can't think of a better term - these messages mostly
884#. indicate how processing is progressing.
885#: ../src/netskel.c:216
886#: n:126
887msgid "Concatenating traverses between nodes"
888msgstr "Leg traversele dintre noduri"
889
890#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
891#. "sequence" for the English "traverse", which makes sense (although toporobot
892#. actually uses this term to mean something more specific).  Feel free to
893#. follow this lead if you can't think of a better term - these messages mostly
894#. indicate how processing is progressing.
895#: ../src/netskel.c:409
896#: n:127
897msgid "Calculating traverses between nodes"
898msgstr "Calculez traversele dintre noduri"
899
900#. TRANSLATORS: In French, Eric chose to use the terminology used by toporobot:
901#. "sequence" for the English "traverse", which makes sense (although toporobot
902#. actually uses this term to mean something more specific).  Feel free to
903#. follow this lead if you can't think of a better term - these messages mostly
904#. indicate how processing is progressing.
905#.
906#. A trailing traverse is a dead end back to a junction.
907#: ../src/netskel.c:739
908#: n:128
909msgid "Calculating trailing traverses"
910msgstr "Calculez traversele terminale"
911
912#: ../src/network.c:82
913#: n:129
914msgid "Simplifying network"
915msgstr "Simplific reteaua"
916
917#: ../src/network.c:540
918#: n:130
919msgid "Calculating network"
920msgstr "Calculez reteaua"
921
922#: ../src/datain.c:1436
923#: n:131
924#, c-format
925msgid "Found “%s”, expecting “F” or “B”"
926msgstr "Am gasit “%s”, asteptam “F” sau “B”"
927
928#: ../src/cavern.c:438
929#: n:132
930#, c-format
931msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
932msgstr "Lungimea totala a masuratorilor topografiei = %7.2fm (%7.2fm ajustat)"
933
934#: ../src/cavern.c:441
935#: n:133
936#, c-format
937msgid "Total plan length of survey legs = %7.2fm"
938msgstr "Lungimea totala in plan a masuratorilor topografiei = %7.2fm"
939
940#: ../src/cavern.c:444
941#: n:134
942#, c-format
943msgid "Total vertical length of survey legs = %7.2fm"
944msgstr "Lungimea totala verticala a masuratorilor topografiei = %7.2fm"
945
946#. TRANSLATORS: numbers are altitudes of highest and lowest stations
947#: ../src/cavern.c:450
948#: n:135
949#, c-format
950msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
951msgstr "Interval vertical = %4.2fm (de la %s la %4.2fm de la %s la %4.2fm)"
952
953#. TRANSLATORS: c.f. previous message
954#: ../src/cavern.c:451
955#: n:136
956#, c-format
957msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
958msgstr "Extindere Nord-Sud = %4.2fm (de la %s la %4.2fm de la %s la %4.2fm)"
959
960#. TRANSLATORS: c.f. previous two messages
961#: ../src/cavern.c:452
962#: n:137
963#, c-format
964msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
965msgstr "Extindere Est-Vest = %4.2fm (de la %s la %4.2fm de la %s la %4.2fm)"
966
967#: ../src/cavern.c:426
968#: n:138
969msgid "There is 1 loop."
970msgstr "Este 1 inchidere."
971
972#: ../src/cavern.c:428
973#: n:139
974#, c-format
975msgid "There are %ld loops."
976msgstr "Sunt %ld inchideri."
977
978#: ../src/cavern.c:364
979#: n:140
980#, c-format
981msgid "CPU time used %5.2fs"
982msgstr "Timp CPU folosit %5.2fs"
983
984#: ../src/cavern.c:367
985#: n:141
986#, c-format
987msgid "Time used %5.2fs"
988msgstr "Timp utilizat %5.2fs"
989
990#: ../src/cavern.c:369
991#: n:142
992msgid "Time used unavailable"
993msgstr "Timp utilizat indisponibil"
994
995#: ../src/cavern.c:372
996#: n:143
997#, c-format
998msgid "Time used %5.2fs (%5.2fs CPU time)"
999msgstr "Timp utilizat %5.2fs (timp CPU %5.2fs)"
1000
1001#: ../src/cavern.c:376
1002#: n:144
1003msgid "Done."
1004msgstr "Gata."
1005
1006#: ../src/netskel.c:717
1007#: n:145
1008#, c-format
1009msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1010msgstr "Lungimea originala %6.2fm (%3d legs), ajustata %6.2fm (%5.2fm/masuratoare). "
1011
1012#: ../src/netskel.c:720
1013#: n:146
1014#, c-format
1015msgid "Error %6.2f%%"
1016msgstr "Eroare %6.2f%%"
1017
1018#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the traverse has zero length, so
1019#. error per metre is meaningless
1020#. There should be 4 spaces between "Error" and "N/A" so that it lines up with
1021#. the numbers in the message above.
1022#: ../src/netskel.c:722
1023#: n:147
1024msgid "Error    N/A"
1025msgstr "Eroare    N/A"
1026
1027#: ../src/cad3d.c:627
1028#: n:148
1029#, c-format
1030msgid "generate grid (default %sm)"
1031msgstr ""
1032
1033#: ../src/cad3d.c:628
1034#: n:149
1035#, c-format
1036msgid "station labels text height (default %s)"
1037msgstr ""
1038
1039#: ../src/cad3d.c:629
1040#: n:152
1041#, c-format
1042msgid "station marker size (default %s)"
1043msgstr ""
1044
1045#: ../src/cad3d.c:631
1046#: n:155
1047#, c-format
1048msgid "factor to scale down by (default %s)"
1049msgstr ""
1050
1051#: ../src/cad3d.c:632
1052#: n:156
1053msgid "produce DXF output"
1054msgstr ""
1055
1056#: ../src/cad3d.c:633
1057#: n:158
1058msgid "produce Skencil output"
1059msgstr ""
1060
1061#: ../src/cad3d.c:634
1062#: n:159
1063msgid "produce Compass PLT output for Carto"
1064msgstr ""
1065
1066#: ../src/cad3d.c:635
1067#: n:160
1068msgid "produce SVG output"
1069msgstr ""
1070
1071#. TRANSLATORS: description of --help option
1072#: ../src/cmdline.c:137
1073#: n:150
1074msgid "display this help and exit"
1075msgstr "afişează acest mesaj şi termină"
1076
1077#. TRANSLATORS: description of --verbose option
1078#: ../src/cmdline.c:139
1079#: n:151
1080msgid "output version information and exit"
1081msgstr "afişează informaţii despre versiune şi termină"
1082
1083#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1084#: ../src/cmdline.c:166
1085#: n:153
1086msgid "OPTION"
1087msgstr "OPŢIUNE"
1088
1089#: ../src/mainfrm.cc:130
1090#: ../src/printwx.cc:259
1091#: ../src/printwx.cc:761
1092#: ../src/printwx.cc:815
1093#: n:154
1094msgid "Scale"
1095msgstr "Scara"
1096
1097#: ../src/cmdline.c:190
1098#: n:157
1099#, c-format
1100msgid "Try “%s --help” for more information.\n"
1101msgstr "Încercaţi “%s --help” pentru informaclţii suplimentare.\n"
1102
1103#: ../src/avenprcore.cc:262
1104#: n:166
1105#, c-format
1106msgid "Page %d of %d"
1107msgstr "Pagina %d din %d"
1108
1109#: ../src/avenprcore.cc:265
1110#: ../src/printwx.cc:1240
1111#: n:167
1112#, c-format
1113msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1114msgstr "Topografia “%s”   Pagina %d (din %d)   Procesat in %s"
1115
1116#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1117#. something like "123°".  The bearing is up the page.
1118#: ../src/printwx.cc:706
1119#: n:168
1120#, c-format
1121msgid "Plan view, %s up page"
1122msgstr ""
1123
1124#. TRANSLATORS: This is used on printouts of elevations, with %s replaced by
1125#. something like "123°".  The bearing is the direction we’re looking.
1126#: ../src/printwx.cc:740
1127#: n:169
1128#, c-format
1129msgid "Elevation facing %s"
1130msgstr ""
1131
1132#. TRANSLATORS: This is used on printouts of tilted elevations, with the first
1133#. %s replaced by something like "123°", and the second by something like "-45°".
1134#. The bearing is the direction we’re looking.
1135#: ../src/printwx.cc:745
1136#: n:284
1137#, c-format
1138msgid "Elevation facing %s, tilted %s"
1139msgstr ""
1140
1141#. TRANSLATORS: This is used on printouts of extended elevations.
1142#: ../src/printwx.cc:753
1143#: n:191
1144msgid "Extended elevation"
1145msgstr "Profil longitudinal"
1146
1147#: ../src/cavern.c:412
1148#: n:172
1149msgid "Survey contains 1 survey station,"
1150msgstr "Topografia contine 1 punct de statie,"
1151
1152#: ../src/cavern.c:414
1153#: n:173
1154#, c-format
1155msgid "Survey contains %ld survey stations,"
1156msgstr "Topografia contine %ld puncte de statie,"
1157
1158#: ../src/cavern.c:418
1159#: n:174
1160msgid " joined by 1 leg."
1161msgstr " unite printr-o masuratoare."
1162
1163#: ../src/cavern.c:420
1164#: n:175
1165#, c-format
1166msgid " joined by %ld legs."
1167msgstr " unite prin %ld masuratori."
1168
1169#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1170#: ../src/listpos.c:182
1171#: n:176
1172msgid "node"
1173msgstr "nod"
1174
1175#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1176#: ../src/listpos.c:182
1177#: n:177
1178msgid "nodes"
1179msgstr "noduri"
1180
1181#. TRANSLATORS: connected component in the graph theory sense
1182#. It means there are %ld bits of survey with no connections between them
1183#. This message is only used if there are more than 1
1184#: ../src/cavern.c:434
1185#: n:178
1186#, c-format
1187msgid "Survey has %ld connected components."
1188msgstr "Topografia contine %ld componente conexe."
1189
1190#. TRANSLATORS: Label for button in aven’s cavern log window which causes the
1191#. survey data to be reprocessed.
1192#: ../src/cavernlog.cc:389
1193#: ../src/cavernlog.cc:400
1194#: n:184
1195msgid "Reprocess"
1196msgstr ""
1197
1198#: ../src/cmdline.c:238
1199#: ../src/cmdline.c:257
1200#: n:185
1201#, c-format
1202msgid "numeric argument “%s” out of range"
1203msgstr "argumentul numeric “%s” in afara intervalului acceptat"
1204
1205#: ../src/cmdline.c:240
1206#: n:186
1207#, c-format
1208msgid "argument “%s” not an integer"
1209msgstr "argumentul “%s” nu este un intreg"
1210
1211#: ../src/cmdline.c:259
1212#: n:187
1213#, c-format
1214msgid "argument “%s” not a number"
1215msgstr "argumentul “%s” nu este un numar"
1216
1217#: ../src/commands.c:815
1218#: n:188
1219msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1220msgstr "Astept “DUPLICATE”, “SPLAY”, sau “SURFACE”"
1221
1222#: ../src/commands.c:818
1223#: n:189
1224msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1225msgstr "Astept “NOT”, “DUPLICATE”, “SPLAY” sau “SURFACE”"
1226
1227#: ../src/listpos.c:82
1228#: n:190
1229#, c-format
1230msgid "Station “%s” referred to by *entrance or *export but never used"
1231msgstr "Punctul de statie “%s” a fost definit ca *entrance sau *export dar nu a fost folost"
1232
1233#: ../src/commands.c:617
1234#: n:192
1235msgid "No matching BEGIN"
1236msgstr "Lipseste BEGIN corespunzator"
1237
1238#. TRANSLATORS: *BEGIN <prefix> and *END <prefix> should have the same <prefix> if it’s
1239#. given at all
1240#: ../src/commands.c:639
1241#: n:193
1242msgid "Prefix tag doesn’t match BEGIN"
1243msgstr "Prefixul nu corespunde cu cel al lui BEGIN"
1244
1245#: ../src/commands.c:643
1246#: n:194
1247msgid "Closing prefix omitted from END"
1248msgstr "Prefixul de incheiere omis in END"
1249
1250#. TRANSLATORS: heading line for .pos file
1251#. please try to ensure the “,”s (or at least the columns) are in the same place
1252#: ../src/3dtopos.c:109
1253#: n:195
1254msgid "( Easting, Northing, Altitude )"
1255msgstr "( Est (X), Nord (Y), Altitudine Z )"
1256
1257#. TRANSLATORS: bpp is "Bits Per Pixel"
1258#: ../src/aboutdlg.cc:172
1259#: n:196
1260#, c-format
1261msgid "Display Depth: %d bpp"
1262msgstr ""
1263
1264#. TRANSLATORS: appended to previous message if the display is colour
1265#: ../src/aboutdlg.cc:173
1266#: n:197
1267msgid " (colour)"
1268msgstr ""
1269
1270#: ../src/readval.c:510
1271#: ../src/readval.c:520
1272#: ../src/readval.c:528
1273#: n:198
1274#, c-format
1275msgid "Expecting date, found “%s”"
1276msgstr "Date asteptate, “%s” gasit"
1277
1278#. TRANSLATORS: --help output for --survey option
1279#. "this" has been added to English translation
1280#: ../src/3dtopos.c:50
1281#: ../src/aven.cc:63
1282#: ../src/cad3d.c:623
1283#: ../src/diffpos.c:57
1284#: ../src/dump3d.c:50
1285#: ../src/extend.c:443
1286#: n:199
1287msgid "only load the sub-survey with this prefix"
1288msgstr "incarcati doar sub-topografia cu prefixul"
1289
1290#. TRANSLATORS: --help output for aven --print option
1291#: ../src/aven.cc:64
1292#: n:119
1293msgid "print and exit (requires a 3d file)"
1294msgstr ""
1295
1296#. TRANSLATORS: --help output for cavern --percentage option
1297#: ../src/cavern.c:122
1298#: n:161
1299msgid "display percentage progress"
1300msgstr ""
1301
1302#. TRANSLATORS: --help output for cavern --output option
1303#: ../src/cavern.c:123
1304#: n:162
1305msgid "set location for output files"
1306msgstr ""
1307
1308#. TRANSLATORS: --help output for cavern --quiet option
1309#: ../src/cavern.c:124
1310#: n:163
1311msgid "only show brief summary (-qq for errors only)"
1312msgstr ""
1313
1314#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1315#: ../src/cavern.c:125
1316#: n:164
1317msgid "do not create .err file"
1318msgstr ""
1319
1320#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1321#: ../src/cavern.c:126
1322#: n:165
1323msgid "turn warnings into errors"
1324msgstr ""
1325
1326#. TRANSLATORS: --help output for cavern --log option
1327#: ../src/cavern.c:127
1328#: n:170
1329msgid "log output to .log file"
1330msgstr ""
1331
1332#. TRANSLATORS: --help output for cavern --3d-version option
1333#: ../src/cavern.c:128
1334#: n:171
1335msgid "specify the 3d file format version to output"
1336msgstr ""
1337
1338#. TRANSLATORS: --help output for sorterr --horizontal option
1339#: ../src/sorterr.c:52
1340#: n:179
1341msgid "sort by horizontal error factor"
1342msgstr ""
1343
1344#. TRANSLATORS: --help output for sorterr --vertical option
1345#: ../src/sorterr.c:53
1346#: n:180
1347msgid "sort by vertical error factor"
1348msgstr ""
1349
1350#. TRANSLATORS: --help output for sorterr --percentage option
1351#: ../src/sorterr.c:54
1352#: n:181
1353msgid "sort by percentage error"
1354msgstr ""
1355
1356#. TRANSLATORS: --help output for sorterr --per-leg option
1357#: ../src/sorterr.c:55
1358#: n:182
1359msgid "sort by error per leg"
1360msgstr ""
1361
1362#. TRANSLATORS: --help output for sorterr --replace option
1363#: ../src/sorterr.c:56
1364#: n:183
1365msgid "replace .err file with resorted version"
1366msgstr ""
1367
1368#. TRANSLATORS: --help output for dump3d --rewind option
1369#: ../src/dump3d.c:51
1370#: n:204
1371msgid "rewind file and read it a second time"
1372msgstr ""
1373
1374#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s meaningless to say
1375#. your tape is marked in "0 feet" (but you might measure distance by counting
1376#. knots on a diving line, and tie them every "2 feet").
1377#: ../src/commands.c:1280
1378#: n:200
1379msgid "*UNITS factor must be non-zero"
1380msgstr "Factorul *UNITS trebuie sa fie diferit de zero"
1381
1382#. TRANSLATORS: In the "File" menu
1383#: ../src/mainfrm.cc:740
1384#: n:201
1385msgid "&Screenshot…"
1386msgstr "&Captura ecran…"
1387
1388#: ../src/mainfrm.cc:1327
1389#: n:202
1390#, c-format
1391msgid "No survey data in 3d file “%s”"
1392msgstr "Nu exista date de topografie in fisierul 3d “%s”"
1393
1394#: ../src/gfxcore.cc:650
1395#: n:203
1396msgid "Facing"
1397msgstr "Directie"
1398
1399#. TRANSLATORS: for the title of the About box
1400#: ../src/aboutdlg.cc:69
1401#: n:205
1402#, c-format
1403msgid "About %s"
1404msgstr "Despre %s"
1405
1406#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1407#. it should be translated to the terminology that cavers using the language
1408#. would use.
1409#.
1410#. File->Open dialog:
1411#: ../src/mainfrm.cc:1776
1412#: n:206
1413#, fuzzy
1414msgid "Select a survey file to view"
1415msgstr "Selectati un fisier 3d pentru vizualizare"
1416
1417#: ../src/mainfrm.cc:1768
1418#: n:207
1419msgid "Survex 3d files"
1420msgstr "Fisier Survex 3d"
1421
1422#: ../src/mainfrm.cc:1773
1423#: ../src/mainfrm.cc:2168
1424#: n:208
1425msgid "All files"
1426msgstr "Toate fisierele"
1427
1428#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1429#. it should be translated to the terminology that cavers using the language
1430#. would use.
1431#: ../src/mainfrm.cc:1767
1432#: n:229
1433msgid "All survey files"
1434msgstr ""
1435
1436#: ../src/mainfrm.cc:1769
1437#: n:329
1438msgid "Survex svx files"
1439msgstr "Fisier Survex svx"
1440
1441#: ../src/mainfrm.cc:1771
1442#: n:330
1443msgid "Compass DAT and MAK files"
1444msgstr ""
1445
1446#: ../src/printwx.cc:397
1447#: n:411
1448msgid "DXF files"
1449msgstr "Fisier DXF"
1450
1451#: ../src/printwx.cc:397
1452#: n:412
1453msgid "EPS files"
1454msgstr "Fisier EPS"
1455
1456#: ../src/printwx.cc:397
1457#: n:413
1458msgid "GPX files"
1459msgstr "Fisier GPX"
1460
1461#: ../src/printwx.cc:397
1462#: n:414
1463msgid "HPGL for plotters"
1464msgstr ""
1465
1466#: ../src/printwx.cc:397
1467#: n:415
1468msgid "Compass PLT for use with Carto"
1469msgstr ""
1470
1471#: ../src/printwx.cc:397
1472#: n:416
1473msgid "Skencil files"
1474msgstr "Fisier Skencil"
1475
1476#: ../src/printwx.cc:397
1477#: n:417
1478msgid "SVG files"
1479msgstr "Fisier SVG"
1480
1481#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1482#. it should be translated to the terminology that cavers using the language
1483#. would use.
1484#.
1485#. This string is used in the about box (summarising the purpose of aven).
1486#: ../src/aboutdlg.cc:87
1487#: n:209
1488msgid "Survey visualisation tool"
1489msgstr "Utilitar pentru vizualizarea topografiei"
1490
1491#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any accelerator key.
1492#. The accelerators must be different within this group
1493#: ../src/mainfrm.cc:866
1494#: n:210
1495msgid "&File"
1496msgstr "&Fişier"
1497
1498#: ../src/mainfrm.cc:867
1499#: n:211
1500msgid "&Rotation"
1501msgstr "&Rotire"
1502
1503#: ../src/mainfrm.cc:868
1504#: n:212
1505msgid "&Orientation"
1506msgstr "&Orientare"
1507
1508#: ../src/mainfrm.cc:869
1509#: n:213
1510msgid "&View"
1511msgstr "&Vizualizare"
1512
1513#: ../src/mainfrm.cc:871
1514#: n:214
1515msgid "&Controls"
1516msgstr "&Controale"
1517
1518#: ../src/mainfrm.cc:880
1519#: n:215
1520msgid "&Help"
1521msgstr "&Ajutor"
1522
1523#: ../src/mainfrm.cc:873
1524#: n:216
1525msgid "&Presentation"
1526msgstr "&Prezentare"
1527
1528#: ../src/aboutdlg.cc:98
1529#: n:219
1530msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1531msgstr "Acest program este liber; îl puteţi redistribui şi/sau modifica în conformitate cu termenii Licenţei Publice Generale GNU aşa cum este publicată de Free Software Foundation; fie versiunea 2 Licenţei, fie (la latitudinea dumneavoastră) orice versiune ulterioară."
1532
1533#. TRANSLATORS: Part of 3dtopos --help
1534#: ../src/3dtopos.c:85
1535#: n:217
1536msgid "3D_FILE [POS_FILE]"
1537msgstr ""
1538
1539#. TRANSLATORS: Part of diffpos --help
1540#: ../src/diffpos.c:261
1541#: n:218
1542msgid "FILE1 FILE2 [THRESHOLD]"
1543msgstr ""
1544
1545#. TRANSLATORS: Part of diffpos --help
1546#: ../src/diffpos.c:262
1547#: n:255
1548#, c-format
1549msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1550msgstr ""
1551
1552#. TRANSLATORS: Part of extend --help
1553#: ../src/extend.c:464
1554#: n:267
1555msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1556msgstr ""
1557
1558#. TRANSLATORS: Part of sorterr --help
1559#: ../src/sorterr.c:121
1560#: n:268
1561msgid "ERR_FILE [HOW_MANY]"
1562msgstr ""
1563
1564#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1565#. it should be translated to the terminology that cavers using the language
1566#. would use.
1567#.
1568#. Part of aven --help
1569#: ../src/aven.cc:109
1570#: ../src/aven.cc:136
1571#: n:269
1572msgid "[SURVEY_FILE]"
1573msgstr ""
1574
1575#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any accelerator key.
1576#. The string "\t" separates the menu text and any accelerator key.
1577#. TRANSLATORS: "File" menu.  The accelerators must be different within this group.
1578#. c.f. 201, 380, 381.
1579#: ../src/mainfrm.cc:734
1580#: n:220
1581msgid "&Open…\tCtrl+O"
1582msgstr "&Deschide…\tCtrl+O"
1583
1584#. TRANSLATORS: Used in the "colour key" for "colour by date" if there are
1585#. surveys without date information.
1586#: ../src/gfxcore.cc:931
1587#: n:221
1588msgid "Undated"
1589msgstr "Fără dată"
1590
1591#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1592#. which aren’t part of a loop and so have no error information.
1593#: ../src/gfxcore.cc:953
1594#: n:290
1595msgid "Not in loop"
1596msgstr ""
1597
1598#. TRANSLATORS: error from "*data normal newline from to tape compass clino"
1599#: ../src/commands.c:1134
1600#: n:222
1601msgid "NEWLINE can’t be the first reading"
1602msgstr "NEWLINE nu poate fi prima lectura"
1603
1604#. TRANSLATORS: error from "*data normal from to tape compass clino newline"
1605#: ../src/commands.c:1169
1606#: n:223
1607msgid "NEWLINE can’t be the last reading"
1608msgstr "NEWLINE nu poate fi ultima lectura"
1609
1610#. TRANSLATORS: error from "*data normal station tape compass clino"
1611#: ../src/commands.c:1191
1612#: n:224
1613msgid "Interleaved readings, but no NEWLINE"
1614msgstr "Lectura pe mai multe randuri, dar nici o NEWLINE"
1615
1616#. TRANSLATORS: caused by e.g. "*data diving station newline depth tape compass"
1617#: ../src/commands.c:1078
1618#: n:225
1619#, c-format
1620msgid "Reading “%s” must occur before NEWLINE"
1621msgstr "Lectura “%s” trebuie sa preceada NEWLINE"
1622
1623#. TRANSLATORS: e.g. "*data normal from to tape newline compass clino"
1624#: ../src/commands.c:1127
1625#: n:226
1626msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1627msgstr "en:226 NEWLINE poate fi precedat doar de STATION, DEPTH, si COUNT"
1628
1629#: ../src/commands.c:1314
1630#: n:227
1631msgid "Can’t calibrate angular and length quantities together"
1632msgstr "Nu pot calibra unghiurile verticale si lungimile in acelasi timp"
1633
1634#: ../src/commands.c:564
1635#: n:397
1636msgid "Bad *alias command"
1637msgstr ""
1638
1639#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
1640#. height values).
1641#~ msgid "Select a terrain file to view"
1642#~ msgstr "Selectati un model digital al terenului pentru vizualizare"
1643
1644#~ msgid "Terrain files"
1645#~ msgstr "Model digital al terenului"
1646
1647#. TRANSLATORS: %s will be replaced by the application name ("Aven" currently)
1648#: ../src/log.cc:30
1649#: n:228
1650#, c-format
1651msgid "%s Error Log"
1652msgstr ""
1653
1654#. TRANSLATORS: Used in the "Export" settings dialog
1655#: ../src/printwx.cc:363
1656#: n:230
1657msgid "&Export…"
1658msgstr "&Exporta…"
1659
1660#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within this group.
1661#. Tickable menu item which toggles auto rotation
1662#: ../src/mainfrm.cc:753
1663#: n:231
1664msgid "Au&to-Rotate\tSpace"
1665msgstr "&Auto-rotatie\tSpace"
1666
1667#: ../src/mainfrm.cc:755
1668#: n:232
1669msgid "Speed &Up"
1670msgstr "A&ccelereaza rotatia"
1671
1672#: ../src/mainfrm.cc:756
1673#: n:233
1674msgid "Slow &Down"
1675msgstr "&Incetineste rotatia"
1676
1677#: ../src/mainfrm.cc:758
1678#: n:234
1679msgid "&Reverse Direction"
1680msgstr "&Schimba directia"
1681
1682#: ../src/mainfrm.cc:760
1683#: n:235
1684msgid "Step Once &Anticlockwise"
1685msgstr "Un pas in sens a&ntiorar"
1686
1687#: ../src/mainfrm.cc:761
1688#: n:236
1689msgid "Step Once &Clockwise"
1690msgstr "Un pas in sens o&rar"
1691
1692#. TRANSLATORS: View *looking* North
1693#: ../src/gfxcore.cc:2994
1694#: ../src/mainfrm.cc:764
1695#: n:240
1696msgid "View &North"
1697msgstr "Vizualizare spre &Nord"
1698
1699#. TRANSLATORS: View *looking* East
1700#: ../src/gfxcore.cc:2995
1701#: ../src/mainfrm.cc:765
1702#: n:241
1703msgid "View &East"
1704msgstr "Vizualizare spre &Est"
1705
1706#. TRANSLATORS: View *looking* South
1707#: ../src/gfxcore.cc:2996
1708#: ../src/mainfrm.cc:766
1709#: n:242
1710msgid "View &South"
1711msgstr "Vizualizare spre &Sud"
1712
1713#. TRANSLATORS: View *looking* West
1714#: ../src/gfxcore.cc:2997
1715#: ../src/mainfrm.cc:767
1716#: n:243
1717msgid "View &West"
1718msgstr "Vizualizare spre &Vest"
1719
1720#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1721#. it should be translated to the terminology that cavers using the language
1722#. would use.
1723#: ../src/mainfrm.cc:769
1724#: n:244
1725msgid "Shift Survey &Left"
1726msgstr "Mutati topografia spre S&tanga"
1727
1728#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1729#. it should be translated to the terminology that cavers using the language
1730#. would use.
1731#: ../src/mainfrm.cc:770
1732#: n:245
1733msgid "Shift Survey &Right"
1734msgstr "Mutati topografia spre &Dreapta"
1735
1736#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1737#. it should be translated to the terminology that cavers using the language
1738#. would use.
1739#: ../src/mainfrm.cc:771
1740#: n:246
1741msgid "Shift Survey &Up"
1742msgstr "Mutati topografia In s&us"
1743
1744#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions -
1745#. it should be translated to the terminology that cavers using the language
1746#. would use.
1747#: ../src/mainfrm.cc:772
1748#: n:247
1749msgid "Shift Survey &Down"
1750msgstr "Mutati topografia In &jos"
1751
1752#: ../src/gfxcore.cc:3009
1753#: ../src/mainfrm.cc:774
1754#: n:248
1755msgid "&Plan View"
1756msgstr "&Plan"
1757
1758#: ../src/gfxcore.cc:3010
1759#: ../src/mainfrm.cc:775
1760#: n:249
1761msgid "Ele&vation"
1762msgstr "Profi&l"
1763
1764#: ../src/mainfrm.cc:777
1765#: n:250
1766msgid "&Higher Viewpoint"
1767msgstr "Punct de vizualizare mai in&alt"
1768
1769#: ../src/mainfrm.cc:778
1770#: n:251
1771msgid "L&ower Viewpoint"
1772msgstr "Punct de vizualizare mai j&os"
1773
1774#: ../src/mainfrm.cc:781
1775#: n:252
1776msgid "&Zoom In\t]"
1777msgstr "&Mărire\t]"
1778
1779#: ../src/mainfrm.cc:782
1780#: n:253
1781msgid "Zoo&m Out\t["
1782msgstr "Mi&cşorare\t["
1783
1784#: ../src/mainfrm.cc:784
1785#: n:254
1786msgid "Restore De&fault View"
1787msgstr "&Restabiliti setarile initiale"
1788
1789#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing" and
1790#. "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in the
1791#. "what to print" dialog.
1792#: ../src/printwx.cc:253
1793#: n:283
1794msgid "View"
1795msgstr "Vizualizare"
1796
1797#. TRANSLATORS: Used as a label for the surrounding box for the "survey legs" "stations"
1798#. "names" etc checkboxes in the "what to print" dialog.  "Elements" isn’t a
1799#. good name for this but nothing better has yet come to mind!
1800#: ../src/printwx.cc:254
1801#: n:256
1802msgid "Elements"
1803msgstr "Elemente"
1804
1805#: ../src/printwx.cc:273
1806#: ../src/printwx.cc:504
1807#: n:257
1808#, c-format
1809msgid "%d pages (%dx%d)"
1810msgstr "%d pagini (%dx%d)"
1811
1812#. TRANSLATORS: used in the scale drop down selector in the print dialog
1813#. the implicit meaning is "choose a suitable scale to fit the
1814#. plot on a single page", but we need something shorter
1815#: ../src/printwx.cc:260
1816#: ../src/printwx.cc:523
1817#: n:258
1818msgid "One page"
1819msgstr "O pagina"
1820
1821#: ../src/mainfrm.cc:122
1822#: ../src/printwx.cc:280
1823#: n:259
1824msgid "Bearing"
1825msgstr "Azimut"
1826
1827#: ../src/printwx.cc:316
1828#: n:260
1829msgid "Station Names"
1830msgstr "Numele punctelor de statie"
1831
1832#: ../src/printwx.cc:312
1833#: n:261
1834msgid "Crosses"
1835msgstr "Cruci"
1836
1837#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1838#. "survey stations".
1839#: ../src/printwx.cc:304
1840#: n:262
1841msgid "Underground Survey Legs"
1842msgstr "Portiuni subterane ale topografiei"
1843
1844#: ../src/printwx.cc:320
1845#: n:393
1846msgid "Cross-sections"
1847msgstr ""
1848
1849#: ../src/printwx.cc:325
1850#: n:394
1851msgid "Walls"
1852msgstr "Pereti"
1853
1854#: ../src/printwx.cc:329
1855#: n:395
1856msgid "Passages"
1857msgstr "Pasaje"
1858
1859#: ../src/printwc.cc:453
1860#: n:421
1861msgid "Origin in centre"
1862msgstr ""
1863
1864#: ../src/printwc.cc:458
1865#: n:422
1866msgid "Full coordinates"
1867msgstr ""
1868
1869#. TRANSLATORS: Used in the print dialog:
1870#: ../src/printwx.cc:285
1871#: n:263
1872msgid "Tilt angle"
1873msgstr "Unghi de inclinatie"
1874
1875#. TRANSLATORS: used in the print dialog - controls drawing lines around each page
1876#: ../src/printwx.cc:335
1877#: n:264
1878msgid "Page Borders"
1879msgstr "Limite pagina"
1880
1881#. TRANSLATORS: used in the print dialog - controls drawing the box at the lower left
1882#. with survey name, view angles, etc
1883#: ../src/printwx.cc:341
1884#: n:265
1885msgid "Info Box"
1886msgstr "Caseta de informatii"
1887
1888#. TRANSLATORS: will be used in the print dialog - check this to print blank pages
1889#. (otherwise they’ll be skipped to save paper)
1890#: ../src/printwx.cc:339
1891#: n:266
1892msgid "Blank Pages"
1893msgstr "Document nou"
1894
1895#. TRANSLATORS: Items in the "View" menu:
1896#: ../src/mainfrm.cc:798
1897#: n:270
1898msgid "Station &Names\tCtrl+N"
1899msgstr "&Numele punctelor de statie\tCtrl+N"
1900
1901#. TRANSLATORS: Toggles drawing of 3D passages
1902#: ../src/mainfrm.cc:799
1903#: n:346
1904msgid "Passage &Tubes\tCtrl+T"
1905msgstr "Pasaje &Tub\tCtrl+T"
1906
1907#: ../src/mainfrm.cc:800
1908#: n:271
1909msgid "&Crosses\tCtrl+X"
1910msgstr "&Cruci\tCtrl+X"
1911
1912#: ../src/mainfrm.cc:801
1913#: n:297
1914msgid "&Grid\tCtrl+G"
1915msgstr "&Grid\tCtrl+G"
1916
1917#: ../src/mainfrm.cc:802
1918#: n:318
1919msgid "&Bounding Box\tCtrl+B"
1920msgstr "Cadr&u\tCtrl+B"
1921
1922#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1923#. "survey stations".
1924#: ../src/mainfrm.cc:804
1925#: n:272
1926msgid "&Underground Survey Legs\tCtrl+L"
1927msgstr "&Portiuni subterane ale topografiei\tCtrl+L"
1928
1929#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1930#. "survey stations".
1931#: ../src/mainfrm.cc:805
1932#: n:291
1933msgid "&Surface Survey Legs\tCtrl+F"
1934msgstr "Portiuni de &suprafata ale topografiei\tCtrl+F"
1935
1936#: ../src/mainfrm.cc:814
1937#: n:273
1938msgid "&Overlapping Names"
1939msgstr "Nu&me suprapuse"
1940
1941#: ../src/gfxcore.cc:3032
1942#: ../src/mainfrm.cc:815
1943#: n:292
1944msgid "Colour by &Depth"
1945msgstr "Culori in functie de &adancime"
1946
1947#: ../src/gfxcore.cc:3033
1948#: ../src/mainfrm.cc:816
1949#: n:293
1950msgid "Colour by D&ate"
1951msgstr "Culori in functie de &Data"
1952
1953#: ../src/gfxcore.cc:3034
1954#: ../src/mainfrm.cc:817
1955#: n:289
1956#, fuzzy
1957msgid "Colour by E&rror"
1958msgstr "Colour b&y Error"
1959
1960#: ../src/mainfrm.cc:819
1961#: n:294
1962msgid "Highlight &Entrances"
1963msgstr "Marcheaza &Intrarile"
1964
1965#: ../src/mainfrm.cc:820
1966#: n:295
1967msgid "Highlight &Fixed Points"
1968msgstr "Marcheaza Punctele &Fixe"
1969
1970#: ../src/mainfrm.cc:821
1971#: n:296
1972msgid "Highlight E&xported Points"
1973msgstr "Marcheaza Punctele &Exportate"
1974
1975#: ../src/printwx.cc:415
1976#: n:418
1977msgid "Entrances"
1978msgstr "Intrarile"
1979
1980#: ../src/printwx.cc:419
1981#: n:419
1982msgid "Fixed Points"
1983msgstr "Punctele Fixe"
1984
1985#: ../src/printwx.cc:423
1986#: n:420
1987msgid "Exported Stations"
1988msgstr "Punctele Exportate"
1989
1990#: ../src/mainfrm.cc:826
1991#: n:237
1992msgid "&Perspective"
1993msgstr "Perspecti&va"
1994
1995#: ../src/mainfrm.cc:828
1996#: n:238
1997msgid "Textured &Walls"
1998msgstr "Pereti cu te&xtura"
1999
2000#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate using that term
2001#. instead if it gives a better translation which most users will understand.
2002#: ../src/mainfrm.cc:829
2003#: n:239
2004msgid "Fade Distant Ob&jects"
2005msgstr "&Obiecte indepartate neclare"
2006
2007#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2008#. "survey stations".
2009#: ../src/mainfrm.cc:830
2010#: n:298
2011msgid "Smoot&hed Survey Legs"
2012msgstr "Elementele topografiei &rotunjite"
2013
2014#: ../src/mainfrm.cc:836
2015#: ../src/mainfrm.cc:840
2016#: n:356
2017msgid "Full Screen &Mode\tF11"
2018msgstr "Afisare pe tot ecranu&l\tF11"
2019
2020#: ../src/mainfrm.cc:854
2021#: n:274
2022msgid "&Compass"
2023msgstr "&Busola"
2024
2025#: ../src/mainfrm.cc:855
2026#: n:275
2027msgid "C&linometer"
2028msgstr "&Clinometru"
2029
2030#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2031#. corresponds to which depth, date, survey closure error, etc.
2032#: ../src/mainfrm.cc:856
2033#: n:276
2034msgid "Colour &Key"
2035msgstr ""
2036
2037#: ../src/mainfrm.cc:857
2038#: n:277
2039msgid "&Scale Bar"
2040msgstr "Bara de control a &scarii"
2041
2042#: ../src/mainfrm.cc:849
2043#: n:280
2044msgid "&Reverse Sense\tCtrl+R"
2045msgstr "&Schimbati sensul\tCtrl+R"
2046
2047#: ../src/mainfrm.cc:824
2048#: ../src/mainfrm.cc:851
2049#: n:281
2050msgid "&Cancel Measuring Line\tEscape"
2051msgstr "&Anulati linia de masura\tEscape"
2052
2053#: ../src/mainfrm.cc:858
2054#: n:299
2055msgid "&Indicators"
2056msgstr "I&ndicatorii"
2057
2058#: ../src/z_getopt.c:695
2059#: ../src/z_getopt.c:707
2060#: n:300
2061#, c-format
2062msgid "%s: option “%s” is ambiguous\n"
2063msgstr "%s: opţiunea “%s” este ambiguă\n"
2064
2065#: ../src/z_getopt.c:1023
2066#: ../src/z_getopt.c:1034
2067#: n:301
2068#, c-format
2069msgid "%s: option “-W %s” is ambiguous\n"
2070msgstr "%s: opţiunea “-W %s” este ambiguă\n"
2071
2072#: ../src/z_getopt.c:751
2073#: ../src/z_getopt.c:755
2074#: n:302
2075#, c-format
2076msgid "%s: option “%c%s” doesn’t allow an argument\n"
2077msgstr "%s: opţiunea “%c%s” nu permite un argument\n"
2078
2079#: ../src/z_getopt.c:740
2080#: ../src/z_getopt.c:743
2081#: n:303
2082#, c-format
2083msgid "%s: option “--%s” doesn’t allow an argument\n"
2084msgstr "%s: opţiunea “--%s” nu permite un argument\n"
2085
2086#: ../src/z_getopt.c:1058
2087#: ../src/z_getopt.c:1069
2088#: n:304
2089#, c-format
2090msgid "%s: option “-W %s” doesn’t allow an argument\n"
2091msgstr "%s: opţiunea “-W %s” nu permite un argument\n"
2092
2093#: ../src/z_getopt.c:790
2094#: ../src/z_getopt.c:802
2095#: ../src/z_getopt.c:1089
2096#: ../src/z_getopt.c:1101
2097#: n:305
2098#, c-format
2099msgid "%s: option “%s” requires an argument\n"
2100msgstr "%s: opţiunea “%s” necesită un argument\n"
2101
2102#: ../src/z_getopt.c:960
2103#: ../src/z_getopt.c:971
2104#: ../src/z_getopt.c:1154
2105#: ../src/z_getopt.c:1166
2106#: n:306
2107#, c-format
2108msgid "%s: option requires an argument -- %c\n"
2109msgstr "%s: opţiunea necesită un argument -- %c\n"
2110
2111#: ../src/z_getopt.c:840
2112#: ../src/z_getopt.c:843
2113#: n:307
2114#, c-format
2115msgid "%s: unrecognized option “--%s”\n"
2116msgstr "%s: opţiune nerecunoscută “--%s”\n"
2117
2118#: ../src/z_getopt.c:851
2119#: ../src/z_getopt.c:854
2120#: n:308
2121#, c-format
2122msgid "%s: unrecognized option “%c%s”\n"
2123msgstr "%s: opţiune nerecunoscută “%c%s”\n"
2124
2125#: ../src/z_getopt.c:901
2126#: ../src/z_getopt.c:904
2127#: n:309
2128#, c-format
2129msgid "%s: illegal option -- %c\n"
2130msgstr "%s: opţiune ilegală -- %c\n"
2131
2132#: ../src/z_getopt.c:910
2133#: ../src/z_getopt.c:913
2134#: n:310
2135#, c-format
2136msgid "%s: invalid option -- %c\n"
2137msgstr "%s: opţiune invalidă -- %c\n"
2138
2139#: ../src/mainfrm.cc:787
2140#: n:311
2141msgid "&New Presentation"
2142msgstr "Prezentare &noua"
2143
2144#: ../src/mainfrm.cc:788
2145#: n:312
2146msgid "&Open Presentation…"
2147msgstr "&Deschidere prezentare…"
2148
2149#: ../src/mainfrm.cc:789
2150#: n:313
2151msgid "&Save Presentation"
2152msgstr "&Salvare Prezentare"
2153
2154#: ../src/mainfrm.cc:790
2155#: n:314
2156msgid "Sa&ve Presentation As…"
2157msgstr "Salvare Prezentare &ca…"
2158
2159#. TRANSLATORS: "Mark" as in "Mark this position"
2160#: ../src/mainfrm.cc:792
2161#: n:315
2162msgid "&Mark"
2163msgstr "&Marcheaza"
2164
2165#. TRANSLATORS: "Play" as in "Play back a recording"
2166#: ../src/mainfrm.cc:793
2167#: n:316
2168msgid "Pla&y"
2169msgstr "&Vizualizeaza"
2170
2171#: ../src/mainfrm.cc:794
2172#: n:317
2173msgid "&Export as Movie…"
2174msgstr "&Exporta ca Animatie…"
2175
2176#: ../src/mainfrm.cc:2245
2177#: n:331
2178msgid "Export Movie"
2179msgstr ""
2180
2181#: ../src/mainfrm.cc:321
2182#: n:319
2183msgid "Select an output filename"
2184msgstr "Selectati un fisier pentru iesire"
2185
2186#: ../src/mainfrm.cc:318
2187#: ../src/mainfrm.cc:2167
2188#: n:320
2189msgid "Aven presentations"
2190msgstr "Prezentare Aven"
2191
2192#. TRANSLATORS: title of the save screenshot dialog
2193#: ../src/mainfrm.cc:1789
2194#: n:321
2195msgid "Save Screenshot"
2196msgstr "Salvare captura de ecran"
2197
2198#: ../src/mainfrm.cc:2162
2199#: ../src/mainfrm.cc:2165
2200#: n:322
2201msgid "Select a presentation to open"
2202msgstr "Deschidere prezentare"
2203
2204#: ../src/mainfrm.cc:400
2205#: n:323
2206#, c-format
2207msgid "Error in format of presentation file “%s”"
2208msgstr "Eroare in formatul fisierului prezentare “%s”"
2209
2210#. TRANSLATORS: "Compass" as in Larry Fish’s cave surveying package, so probably shouldn’t
2211#. be translated
2212#: ../src/mainfrm.cc:1770
2213#: n:324
2214msgid "Compass PLT files"
2215msgstr "Fisier Compass PLT"
2216
2217#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying package, so don’t translate it.
2218#: ../src/mainfrm.cc:1772
2219#: n:325
2220msgid "CMAP XYZ files"
2221msgstr "Fisier CMAP XYZ"
2222
2223#. TRANSLATORS: title of message box
2224#: ../src/mainfrm.cc:1845
2225#: ../src/mainfrm.cc:2139
2226#: ../src/mainfrm.cc:2156
2227#: n:326
2228msgid "Modified Presentation"
2229msgstr "Prezentare Modificata"
2230
2231#. TRANSLATORS: and the question in that box
2232#: ../src/mainfrm.cc:1844
2233#: ../src/mainfrm.cc:2138
2234#: ../src/mainfrm.cc:2155
2235#: n:327
2236msgid "The current presentation has been modified.  Abandon unsaved changes?"
2237msgstr "Prezentarea curenta a fost modificata. Se abandoneaza schimbarile nesalvate?"
2238
2239#: ../src/mainfrm.cc:2456
2240#: ../src/mainfrm.cc:2465
2241#: n:328
2242msgid "No matches were found."
2243msgstr "Nici un element nua fost gasit."
2244
2245#~ msgid "Open &Terrain…"
2246#~ msgstr "Deschidere &Model Teren…"
2247
2248#~ msgid "Solid Su&rface"
2249#~ msgstr "Suprafata S&olida"
2250
2251#. TRANSLATORS: number of stations found matching search
2252#, c-format
2253#~ msgid "%d found"
2254#~ msgstr "%d gasit"
2255
2256#. TRANSLATORS: "Find stations" button tooltip
2257#: ../src/mainfrm.cc:930
2258#: n:332
2259msgid "Find"
2260msgstr "Găseşte"
2261
2262#. TRANSLATORS: "Hide stations" button default tooltip
2263#: ../src/mainfrm.cc:931
2264#: ../src/mainfrm.cc:2497
2265#: n:333
2266msgid "Hide"
2267msgstr "Ascunde"
2268
2269#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2270#: ../src/mainfrm.cc:2458
2271#: n:334
2272#, c-format
2273msgid "Hide %d found stations"
2274msgstr ""
2275
2276#: ../src/mainfrm.cc:205
2277#: ../src/mainfrm.cc:1915
2278#: ../src/mainfrm.cc:1919
2279#: ../src/mainfrm.cc:1984
2280#: ../src/mainfrm.cc:1986
2281#: ../src/mainfrm.cc:2029
2282#: ../src/mainfrm.cc:2033
2283#: n:335
2284msgid "Altitude"
2285msgstr "Altitudine"
2286
2287#. TRANSLATORS: error if you try to drag multiple files to the aven window
2288#: ../src/mainfrm.cc:674
2289#: n:336
2290msgid "You may only view one 3d file at a time."
2291msgstr "Puteti vizualiza doar un fisier 3d odata"
2292
2293#: ../src/mainfrm.cc:859
2294#: n:337
2295msgid "&Side Panel"
2296msgstr "&Cadran lateral"
2297
2298#. TRANSLATORS: show coordinates (N = North or Northing, E = East or Easting)
2299#: ../src/mainfrm.cc:1914
2300#: ../src/mainfrm.cc:1917
2301#: ../src/mainfrm.cc:1940
2302#: ../src/mainfrm.cc:1942
2303#: ../src/mainfrm.cc:2028
2304#: ../src/mainfrm.cc:2031
2305#: n:338
2306msgid "%.2f E, %.2f N"
2307msgstr "%.2f E, %.2f N"
2308
2309#. TRANSLATORS: Used in Aven:
2310#. From <stationname>
2311#. H: 123.45m V: 234.56m
2312#. Dist: 456.78m  Brg: 200
2313#: ../src/mainfrm.cc:1957
2314#: ../src/mainfrm.cc:1996
2315#: ../src/mainfrm.cc:2052
2316#: n:339
2317#, c-format
2318msgid "From %s"
2319msgstr "De la %s"
2320
2321#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2322#: ../src/mainfrm.cc:2056
2323#: ../src/mainfrm.cc:2059
2324#: n:340
2325#, c-format
2326msgid "H %.2f%s, V %.2f%s"
2327msgstr "H %.2f%s, V %.2f%s"
2328
2329#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as in Compass bearing)
2330#: ../src/mainfrm.cc:2072
2331#: ../src/mainfrm.cc:2076
2332#: n:341
2333#, c-format
2334msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2335msgstr "%s: %s, Dist %.2f%s, Azim %03d%s"
2336
2337#. TRANSLATORS: tickable menu item in View menu
2338#: ../src/gfxcore.cc:3023
2339#: ../src/gfxcore.cc:3038
2340#: ../src/mainfrm.cc:861
2341#: n:342
2342msgid "&Metric"
2343msgstr "&Metric"
2344
2345#. TRANSLATORS: tickable menu item in View menu.
2346#. Degrees are the angular measurement where there are 360 in a
2347#. full circle.
2348#: ../src/gfxcore.cc:3000
2349#: ../src/gfxcore.cc:3013
2350#: ../src/mainfrm.cc:862
2351#: n:343
2352msgid "&Degrees"
2353msgstr "&Grade"
2354
2355#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2356#: ../src/gfxcore.cc:2999
2357#: n:387
2358msgid "&Hide Compass"
2359msgstr ""
2360
2361#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2362#: ../src/gfxcore.cc:3012
2363#: n:384
2364msgid "&Hide Clino"
2365msgstr ""
2366
2367#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2368#: ../src/gfxcore.cc:3022
2369#: n:385
2370msgid "&Hide scale bar"
2371msgstr ""
2372
2373#. TRANSLATORS: Menu item which turns off the colour key.
2374#. The "Colour Key" is the thing in aven showing which colour
2375#. corresponds to which depth, date, survey closure error, etc.
2376#: ../src/gfxcore.cc:3036
2377#: n:386
2378msgid "&Hide colour key"
2379msgstr ""
2380
2381#. TRANSLATORS: degree symbol - probably should be translated to itself.
2382#: ../src/mainfrm.cc:1961
2383#: ../src/mainfrm.cc:2065
2384#: ../src/printwx.cc:704
2385#: ../src/printwx.cc:729
2386#: ../src/printwx.cc:733
2387#: ../src/printwx.cc:737
2388#: ../src/printwx.cc:744
2389#: n:344
2390msgid "°"
2391msgstr "°"
2392
2393#. TRANSLATORS: alternative angle units (400 grad = 360 degrees = full circle).
2394#. Try to make this as short as sensibly possible.
2395#.
2396#. E.g. in Italian and Spanish we use "g.cent." rather than
2397#. "gradi quattrocentesimali"/"grados centesimales"
2398#: ../src/mainfrm.cc:1964
2399#: ../src/mainfrm.cc:2068
2400#: n:345
2401msgid "grad"
2402msgstr "gr.cent"
2403
2404#: ../src/mainfrm.cc:844
2405#: n:347
2406#~ msgid "&Preferences…"
2407#~ msgstr "&Preferinte…"
2408
2409#: n:348
2410#~ msgid "Draw passage walls"
2411#~ msgstr "Deseneaza peretii"
2412
2413#: n:349
2414#~ msgid "Estimate LRUD readings based on heuristics"
2415#~ msgstr "Estimeaza masuratorile SDSJ pe baze euristice"
2416
2417#: n:350
2418#~ msgid "Mark survey stations with crosses"
2419#~ msgstr "Marcheaza punctele de statie cu cruci"
2420
2421#: n:351
2422#~ msgid "Highlight stations marked as entrances"
2423#~ msgstr "Evidentiaza punctele de statie selectate ca intrari"
2424
2425#: n:352
2426#~ msgid "Highlight stations marked as fixed points"
2427#~ msgstr "Evidentiaza punctele de statie selectate ca puncte fixe"
2428
2429#: n:353
2430#~ msgid "Highlight stations which are exported"
2431#~ msgstr "Evidentiaza punctele de statie care sunt exportate"
2432
2433#: n:354
2434#~ msgid "Mark survey stations with their names"
2435#~ msgstr "Marcheaza punctele de statie cu numele lor"
2436
2437#: n:355
2438#~ msgid "Allow names to overlap on the display (faster)"
2439#~ msgstr "Permite suprapunerea numelor (mai rapid)"
2440
2441#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2442#. "survey stations".
2443#: n:357
2444#~ msgid "Display underground survey legs"
2445#~ msgstr "Afisare masuratori subterane"
2446
2447#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2448#. "survey stations".
2449#: n:358
2450#~ msgid "Display surface survey legs"
2451#~ msgstr "Afisare masuratori de suprafata"
2452
2453#: n:359
2454#~ msgid "Colour surface surveys by depth"
2455#~ msgstr "Colorare masuratori suprafata in functie de altitudine"
2456
2457#: n:360
2458#~ msgid "Draw surface legs with dashed lines"
2459#~ msgstr "Deseneaza masuratorile de suprafata cu linie intrerupta"
2460
2461#: n:361
2462#~ msgid "Draw a grid"
2463#~ msgstr "Afiseaza un grid"
2464
2465#: n:362
2466#~ msgid "metric units"
2467#~ msgstr "Metri"
2468
2469#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
2470#. the USA (rather confusingly now that England has largely gone metric!)
2471#: n:363
2472#~ msgid "imperial units"
2473#~ msgstr "unitati masura englezesti"
2474
2475#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
2476#. full circle.
2477#: n:364
2478#~ msgid "degrees (°)"
2479#~ msgstr "grade sexagesimale (°)"
2480
2481#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
2482#. full circle.
2483#: n:365
2484#~ msgid "grads"
2485#~ msgstr "grade zecimale"
2486
2487#: n:366
2488#~ msgid "Display measurements in"
2489#~ msgstr "Afisare distante in"
2490
2491#: n:367
2492#~ msgid "Display angles in"
2493#~ msgstr "Afisare unghiuri in"
2494
2495#. TRANSLATORS: reverses the sense of the mouse controls
2496#: n:368
2497#~ msgid "Reverse the sense of the controls"
2498#~ msgstr "Schimba sensul butoanelor de control"
2499
2500#: n:369
2501#~ msgid "Display scale bar"
2502#~ msgstr "Afiseaza scara"
2503
2504#: n:370
2505#~ msgid "Display depth bar"
2506#~ msgstr "Afiseaza scara de adancime"
2507
2508#: n:371
2509#~ msgid "Display compass"
2510#~ msgstr "Afiseaza busola"
2511
2512#: n:372
2513#~ msgid "Display clinometer"
2514#~ msgstr "Afiseaza clinometrul"
2515
2516#: n:373
2517#~ msgid "Display side panel"
2518#~ msgstr "Afiseaza casuta laterala"
2519
2520#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as in Compass bearing)
2521#: ../src/mainfrm.cc:1968
2522#: ../src/mainfrm.cc:1971
2523#: n:374
2524#, fuzzy, c-format
2525msgid "%s: H %.2f%s, Brg %03d%s"
2526msgstr "%s: H %.2f%s, Azim %03d%s"
2527
2528#. TRANSLATORS: "V" is short for "Vertical"
2529#: ../src/mainfrm.cc:1999
2530#: ../src/mainfrm.cc:2002
2531#: n:375
2532#, fuzzy, c-format
2533msgid "%s: V %.2f%s"
2534msgstr "%s: V %.2f%s"
2535
2536#. TRANSLATORS: labels for tabbed side panel
2537#. this is for the tab with the tree hierarchy of survey station names
2538#: ../src/mainfrm.cc:982
2539#: n:376
2540msgid "Surveys"
2541msgstr "Masuratori"
2542
2543#: ../src/mainfrm.cc:983
2544#: n:377
2545msgid "Presentation"
2546msgstr "Prezentare"
2547
2548#: ../src/mainfrm.cc:203
2549#: n:378
2550msgid "Easting"
2551msgstr "Est"
2552
2553#: ../src/mainfrm.cc:204
2554#: n:379
2555msgid "Northing"
2556msgstr "Nord"
2557
2558#: ../src/mainfrm.cc:737
2559#: n:380
2560msgid "&Print…\tCtrl+P"
2561msgstr "&Imprimare…\tCtrl+P"
2562
2563#: ../src/mainfrm.cc:738
2564#: n:381
2565msgid "P&age Setup…"
2566msgstr "Initializare &pagina…"
2567
2568#: ../src/mainfrm.cc:741
2569#: n:382
2570msgid "&Export as…"
2571msgstr "&Exporta ca…"
2572
2573#. TRANSLATORS: Title of file dialog to choose name and type of exported file.
2574#: ../src/printwx.cc:396
2575#: n:401
2576msgid "Export as:"
2577msgstr ""
2578
2579#. TRANSLATORS: Title of the export dialog
2580#: ../src/printwx.cc:210
2581#: n:383
2582msgid "Export"
2583msgstr "Exporta"
2584
2585#. TRANSLATORS: for about box:
2586#: ../src/aboutdlg.cc:134
2587#: n:390
2588msgid "System Information:"
2589msgstr "Informatii despre Sistem:"
2590
2591#. TRANSLATORS: Title of the print preview dialog
2592#: ../src/printwx.cc:420
2593#: n:398
2594msgid "Print Preview"
2595msgstr "Vizualizare inaintea imprimarii"
2596
2597#. TRANSLATORS: Title of the print dialog
2598#: ../src/printwx.cc:210
2599#: n:399
2600msgid "Print"
2601msgstr "Imprimare"
2602
2603#: ../src/printwx.cc:360
2604#: n:400
2605msgid "&Print…"
2606msgstr "&Imprimare…"
2607
2608#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2609#. "survey stations".
2610#: ../src/printwx.cc:308
2611#: n:403
2612msgid "Sur&face Survey Legs"
2613msgstr "&Portiuni de suprafata ale topografiei"
2614
2615#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2616#: ../src/mainfrm.cc:95
2617#: n:404
2618msgid "Edit Waypoint"
2619msgstr ""
2620
2621#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint in a presentation.
2622#: ../src/mainfrm.cc:132
2623#: n:278
2624msgid " (unused in perspective view)"
2625msgstr ""
2626
2627#. TRANSLATORS: Field label in dialog to edit a waypoint in a presentation.
2628#: ../src/mainfrm.cc:137
2629#: n:279
2630msgid "Time: "
2631msgstr "Timp: "
2632
2633#. TRANSLATORS: units+info after time field in dialog to edit a waypoint in a presentation.
2634#: ../src/mainfrm.cc:139
2635#: n:282
2636msgid " secs (0 = auto; *6 = 6 times auto)"
2637msgstr ""
2638
2639#. TRANSLATORS: %s will be replaced with "Aven" currently (and perhaps by "Survex" or other
2640#. things in future).
2641#: ../src/aven.cc:221
2642#: n:405
2643#, c-format
2644msgid "This version of %s requires OpenGL to work, but it isn’t available."
2645msgstr ""
2646
2647#. TRANSLATORS: for diffpos:
2648#: ../src/diffpos.c:158
2649#: n:500
2650#, c-format
2651msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2652msgstr "Mutat cu (%3.2f,%3.2f,%3.2f): %s"
2653
2654#. TRANSLATORS: for diffpos:
2655#: ../src/diffpos.c:194
2656#: n:501
2657#, c-format
2658msgid "Added: %s"
2659msgstr "Adaugat: %s"
2660
2661#. TRANSLATORS: for diffpos:
2662#: ../src/diffpos.c:216
2663#: n:502
2664#, c-format
2665msgid "Deleted: %s"
2666msgstr "Eliminat: %s"
2667
2668#. TRANSLATORS: for extend:
2669#. the user specified breaking a loop or changing extend direction at
2670#. this station, but we didn’t find it in the 3d file
2671#: ../src/extend.c:258
2672#: ../src/extend.c:275
2673#: ../src/extend.c:315
2674#: ../src/extend.c:355
2675#: ../src/extend.c:395
2676#: n:510
2677#, c-format
2678msgid "Failed to find station %s"
2679msgstr "Nu s-a gasit punctul de statie %s"
2680
2681#. TRANSLATORS: for extend:
2682#. the user specified breaking a loop or changing extend direction at
2683#. this leg, but we didn’t find it in the 3d file
2684#: ../src/extend.c:297
2685#: ../src/extend.c:337
2686#: ../src/extend.c:377
2687#: ../src/extend.c:417
2688#: n:511
2689#, c-format
2690msgid "Failed to find leg %s → %s"
2691msgstr "Nu s-a gasit masuratoarea %s → %s"
2692
2693#. TRANSLATORS: for extend:
2694#. "extend" is starting to produce an extended elevation from station %s
2695#: ../src/extend.c:252
2696#: n:512
2697#, c-format
2698msgid "Starting from station %s"
2699msgstr "Incepind cu punctul de statie %s"
2700
2701#. TRANSLATORS: for extend:
2702#: ../src/extend.c:268
2703#: n:513
2704#, c-format
2705msgid "Extending to the left from station %s"
2706msgstr "Extindere spre stanga incepind cu punctul de statie %s"
2707
2708#. TRANSLATORS: for extend:
2709#: ../src/extend.c:308
2710#: n:514
2711#, c-format
2712msgid "Extending to the right from station %s"
2713msgstr "Extindere spre dreapta incepind cu punctul de statie %s"
2714
2715#. TRANSLATORS: for extend:
2716#: ../src/extend.c:287
2717#: n:515
2718#, c-format
2719msgid "Extending to the left from leg %s → %s"
2720msgstr "Extindere spre stanga incepind cu masuratoarea %s → %s"
2721
2722#. TRANSLATORS: for extend:
2723#: ../src/extend.c:327
2724#: n:516
2725#, c-format
2726msgid "Extending to the right from leg %s → %s"
2727msgstr "Extindere spre drepta incepind cu masuratoarea %s → %s"
2728
2729#. TRANSLATORS: for extend:
2730#: ../src/extend.c:388
2731#: n:517
2732#, c-format
2733msgid "Breaking survey loop at station %s"
2734msgstr "Topografia intrerupta incepind cu punctul de statie %s"
2735
2736#. TRANSLATORS: for extend:
2737#: ../src/extend.c:407
2738#: n:518
2739#, c-format
2740msgid "Breaking survey loop at leg %s → %s"
2741msgstr "Topografia intrerupta incepind cu masuratoarea %s → %s"
2742
2743#. TRANSLATORS: for extend:
2744#: ../src/extend.c:348
2745#: n:519
2746#, c-format
2747msgid "Swapping extend direction from station %s"
2748msgstr "Schimbare directie desen incepind cu punctul de statie %s"
2749
2750#. TRANSLATORS: for extend:
2751#: ../src/extend.c:367
2752#: n:520
2753#, c-format
2754msgid "Swapping extend direction from leg %s → %s"
2755msgstr "Schimbare directie desen incepind cu masuratoarea %s → %s"
2756
2757#. TRANSLATORS: for extend:
2758#: ../src/extend.c:535
2759#: n:521
2760#, c-format
2761msgid "Applying specfile: “%s”"
2762msgstr "Aplicare fisier de specificatii: “%s”"
2763
2764#. TRANSLATORS: for extend:
2765#. Used to tell the user that a file is being written - %s is the filename
2766#: ../src/extend.c:595
2767#: n:522
2768#, c-format
2769msgid "Writing %s…"
2770msgstr "Scriere %s…"
2771
2772#: ../src/findentrances.cc:100
2773#: n:287
2774#, c-format
2775msgid "Failed to initialise input coordinate system “%s”"
2776msgstr ""
2777
2778#: ../src/findentrances.cc:103
2779#: n:288
2780#, c-format
2781msgid "Failed to initialise output coordinate system “%s”"
2782msgstr ""
2783
2784#: ../src/findentrances.cc:155
2785#: n:388
2786msgid "-d PROJ_DATUM 3D_FILE"
2787msgstr ""
2788
2789#. TRANSLATORS: The findentrances utility uses the PROJ library to do
2790#. coordinate transformations (https://trac.osgeo.org/proj/) - you
2791#. pass findentrances a string to tell PROJ what the input datum is.
2792#: ../src/findentrances.cc:146
2793#: n:389
2794msgid "input datum as string to pass to PROJ"
2795msgstr ""
2796
2797#: ../src/readval.c:338
2798#: n:392
2799msgid "Separator in survey name"
2800msgstr ""
2801
2802#: ../src/readval.c:124
2803#: ../src/readval.c:139
2804#: ../src/readval.c:156
2805#: n:3
2806msgid "Can't have a leg between two anonymous stations"
2807msgstr ""
2808
2809#: ../src/dump3d.c:52
2810#: n:396
2811msgid "show survey date information (if present)"
2812msgstr ""
2813
2814#: ../src/mainfrm.cc:811
2815#: n:406
2816#, fuzzy
2817msgid "Spla&y Legs"
2818msgstr "Splay Legs (&z)"
2819
2820#: ../src/mainfrm.cc:808
2821#: n:407
2822msgid "&Hide"
2823msgstr ""
2824
2825#: ../src/mainfrm.cc:809
2826#: n:408
2827msgid "&Fade"
2828msgstr ""
2829
2830#: ../src/mainfrm.cc:810
2831#: n:409
2832msgid "&Show"
2833msgstr ""
2834
2835#: ../src/printwx.cc:297
2836#: n:410
2837msgid "Export format"
2838msgstr ""
Note: See TracBrowser for help on using the repository browser.