Context Navigation

id.po @ 469c47b

Visit:

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data

Last change on this file since 469c47b was a720caa, checked in by Olly Betts <olly@…>, 10 years ago
lib/: Merge changes from survex.pot to *.po.
Property mode set to `100644`
File size: 66.8 KB

Line
1	msgid ""
2	msgstr ""
3	"Project-Id-Version: survex\n"
4	"Report-Msgid-Bugs-To: olly@survex.com\n"
5	"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6	"PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
7	"Last-Translator: Arief Setiadi Wibowo <q_thrynx@yahoo.com>\n"
8	"Language-Team: Indonesian <id@li.org>\n"
9	"MIME-Version: 1.0\n"
10	"Content-Type: text/plain; charset=utf-8\n"
11	"Content-Transfer-Encoding: 8bit\n"
12	"Language: id\n"
13
14	#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
15	#. was trying to allocate space for.
16	#: ../src/message.c:85
17	#: n:1
18	#, c-format
19	msgid "Out of memory (couldn’t find %lu bytes)."
20	msgstr "Kehabisan memori (tidak dapat menemukan %lu byte)."
21
22	#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
23	#. greater" if that gives a more natural translation. It's
24	#. technically not quite right when there are parallel active release
25	#. series (e.g. Survex 1.0.40 was released after 1.2.0), but this
26	#. seems unlikely to confuse users.
27	#: ../src/commands.c:2006
28	#: n:2
29	#, c-format
30	msgid "Survex version %s or greater required to process this survey data."
31	msgstr "Survex versi %s atau selanjutnya dibutuhkan untuk memproses data survei ini."
32
33	#. TRANSLATORS: Indicates a warning message e.g.:
34	#. "spoon.svx:12: warning: *prefix is deprecated"
35	#: ../src/aven.cc:374
36	#: ../src/message.c:1251
37	#: n:4
38	msgid "warning"
39	msgstr "peringatan"
40
41	#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
42	#. by the line number in that file.
43	#: ../src/datain.c:107
44	#: n:5
45	#, c-format
46	msgid "In file included from %s:%u:\n"
47	msgstr ""
48
49	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
50	#. http://en.wikipedia.org/wiki/Deprecation
51	#: ../src/commands.c:560
52	#: n:6
53	msgid "prefix is deprecated - use begin and *end instead"
54	msgstr ""
55
56	#. TRANSLATORS: Here "station" is a survey station, not a train station.
57	#: ../src/readval.c:206
58	#: n:7
59	#, c-format
60	msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
61	msgstr "Karakter “%c” tidak diperkenankan di nama station (gunakan *SET NAMES untuk mengatur karakter yang diperkenankan)"
62
63	#: ../src/readval.c:382
64	#: n:8
65	msgid "Field may not be omitted"
66	msgstr ""
67
68	#: ../src/datain.c:1526
69	#: ../src/datain.c:1812
70	#: ../src/readval.c:384
71	#: ../src/readval.c:425
72	#: ../src/readval.c:455
73	#: n:9
74	#, c-format
75	msgid "Expecting numeric field, found “%s”"
76	msgstr "Mengharapkan isian numerik, menemukan “%s”"
77
78	#: ../src/commands.c:1609
79	#: n:10
80	#, c-format
81	msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
82	msgstr ""
83
84	#: ../src/debug.h:45
85	#: ../src/debug.h:47
86	#: ../src/matrix.c:352
87	#: ../src/message.c:238
88	#: n:11
89	msgid "Bug in program detected! Please report this to the authors"
90	msgstr "Ditemukan kutu pada program! Mohon laporkan ini pada penulis program"
91
92	#: ../src/commands.c:2121
93	#: ../src/extend.c:435
94	#: n:12
95	#, c-format
96	msgid "Unknown command “%s”"
97	msgstr "Perintah tidak dikenal “%s”"
98
99	#. TRANSLATORS: Here "station" is a survey station, not a train station.
100	#: ../src/netbits.c:407
101	#: n:13
102	#, c-format
103	msgid "Station “%s” equated to itself"
104	msgstr ""
105
106	#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
107	#. survey stations.
108	#: ../src/datain.c:1047
109	#: n:14
110	msgid "Compass reading may not be omitted except on plumbed legs"
111	msgstr ""
112
113	#: ../src/datain.c:282
114	#: ../src/extend.c:440
115	#: n:15
116	msgid "End of line not blank"
117	msgstr "Hentikan jika baris tidak kosong"
118
119	#: ../src/cavern.c:393
120	#: n:16
121	#, c-format
122	msgid "There were %d warning(s)."
123	msgstr "Terdapat peringatan %d"
124
125	#. TRANSLATORS: %s is replaced by the command we attempted to run.
126	#: ../src/cavernlog.cc:175
127	#: ../src/cavernlog.cc:233
128	#: n:17
129	#, c-format
130	msgid "Couldn’t run external command: “%s”"
131	msgstr "Gagal mengeksekusi “%s”"
132
133	#: ../src/datain.c:80
134	#: ../src/datain.c:88
135	#: ../src/datain.c:95
136	#: ../src/datain.c:766
137	#: ../src/extend.c:558
138	#: ../src/sorterr.c:80
139	#: ../src/sorterr.c:97
140	#: ../src/sorterr.c:240
141	#: n:18
142	msgid "Error reading file"
143	msgstr "Kesalahan membaca berkas"
144
145	#: ../src/message.c:1266
146	#: n:19
147	msgid "Too many errors - giving up"
148	msgstr "Terlalu banyak galat - menyerah"
149
150	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
151	#. http://en.wikipedia.org/wiki/Deprecation
152	#: ../src/commands.c:1488
153	#: n:20
154	msgid "DEFAULT is deprecated - use CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
155	msgstr ""
156
157	#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
158	#. (a weight on a string). So the problem here is that the leg is
159	#. vertical, so a compass reading has no meaning!
160	#: ../src/datain.c:1018
161	#: n:21
162	msgid "Compass reading given on plumbed leg"
163	msgstr ""
164
165	#: ../src/commands.c:648
166	#: n:22
167	msgid "END with no matching BEGIN in this file"
168	msgstr ""
169
170	#: ../src/datain.c:753
171	#: n:23
172	msgid "BEGIN with no matching END in this file"
173	msgstr ""
174
175	#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
176	#. deprecated, so this error would be generated by:
177	#.
178	#. *equate \foo.7 1
179	#.
180	#. If you're unsure what "deprecated" means, see:
181	#. http://en.wikipedia.org/wiki/Deprecation
182	#: ../src/commands.c:463
183	#: ../src/readval.c:90
184	#: ../src/readval.c:94
185	#: n:25
186	msgid "ROOT is deprecated"
187	msgstr ""
188
189	#. TRANSLATORS: A station must be exported out of each level it is in, so
190	#. this would give "Station “\outer.inner.1” not exported from survey
191	#. “\outer”)":
192	#.
193	#. *equate entrance outer.inner.1
194	#. *begin outer
195	#. *begin inner
196	#. *export 1
197	#. 1 2 1.23 045 -6
198	#. *end inner
199	#. *end outer
200	#: ../src/commands.c:957
201	#: ../src/commands.c:959
202	#: ../src/listpos.c:104
203	#: ../src/readval.c:323
204	#: ../src/readval.c:326
205	#: n:26
206	#, c-format
207	msgid "Station “%s” not exported from survey “%s”"
208	msgstr ""
209
210	#. TRANSLATORS: This error occurs if there's an attempt to
211	#. export a station from a survey which doesn't actually exist.
212	#: ../src/listpos.c:109
213	#: n:286
214	#, c-format
215	msgid "Reference to station “%s” from non-existent survey “%s”"
216	msgstr ""
217
218	#: ../src/readval.c:297
219	#: n:27
220	#, c-format
221	msgid "“%s” can’t be both a station and a survey"
222	msgstr ""
223
224	#: ../src/extend.c:247
225	#: ../src/extend.c:266
226	#: ../src/extend.c:311
227	#: ../src/extend.c:353
228	#: ../src/extend.c:395
229	#: ../src/readval.c:202
230	#: n:28
231	msgid "Expecting station name"
232	msgstr ""
233
234	#. TRANSLATORS: e.g.
235	#.
236	#. *begin crawl
237	#. 1 2 9.45 234 -01
238	#. *end crawl
239	#. *begin crawl # <- warning here
240	#. 2 3 7.67 223 -03
241	#. *end crawl
242	#.
243	#. If you're unsure what "deprecated" means, see:
244	#. http://en.wikipedia.org/wiki/Deprecation
245	#: ../src/commands.c:537
246	#: n:29
247	msgid "Reentering an existing survey is deprecated"
248	msgstr ""
249
250	#: ../src/commands.c:538
251	#: n:30
252	msgid "Originally entered here"
253	msgstr "Aslinya masukkan disini"
254
255	#: ../src/commands.c:1937
256	#: n:31
257	#, c-format
258	msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
259	msgstr ""
260
261	#: ../src/commands.c:1944
262	#: n:32
263	#, c-format
264	msgid "Found “%s”, expecting “ON” or “OFF”"
265	msgstr "Menemukan “%s”, seharusnya “ON” atau “OFF”"
266
267	#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
268	#. translated.
269	#: ../src/commands.c:921
270	#: n:33
271	msgid "Only one station in EQUATE command"
272	msgstr ""
273
274	#: ../src/commands.c:410
275	#: n:34
276	#, c-format
277	msgid "Unknown quantity “%s”"
278	msgstr "Kuantitas tidak diketahui “%s”"
279
280	#: ../src/commands.c:327
281	#: n:35
282	#, c-format
283	msgid "Unknown units “%s”"
284	msgstr "Unit tidak diketahui “%s”"
285
286	#: ../src/commands.c:1777
287	#: ../src/commands.c:1852
288	#: n:434
289	msgid "Unknown coordinate system"
290	msgstr ""
291
292	#: ../src/commands.c:1872
293	#: ../src/commands.c:1897
294	#: n:443
295	#, c-format
296	msgid "Invalid coordinate system: %s"
297	msgstr ""
298
299	#: ../src/commands.c:1859
300	#: ../src/commands.c:1877
301	#: n:435
302	msgid "Coordinate system unsuitable for output"
303	msgstr ""
304
305	#: ../src/commands.c:824
306	#: n:436
307	msgid "Failed to convert coordinates"
308	msgstr ""
309
310	#: ../src/commands.c:829
311	#: n:437
312	msgid "The input projection is set but the output projection isn't"
313	msgstr ""
314
315	#: ../src/commands.c:831
316	#: n:438
317	msgid "The output projection is set but the input projection isn't"
318	msgstr ""
319
320	#: ../src/commands.c:731
321	#: n:439
322	msgid "Coordinates can't be omitted when coordinate system has been specified"
323	msgstr ""
324
325	#. TRANSLATORS: Used when a BEGIN command has no survey, but the
326	#. END command does, e.g.:
327	#.
328	#. *begin
329	#. 1 2 10.00 178 -01
330	#. *end entrance <--[Message given here]
331	#: ../src/commands.c:670
332	#: n:36
333	msgid "Matching BEGIN command has no survey name"
334	msgstr ""
335
336	#. TRANSLATORS: Note: In English you talk about the units of a single
337	#. measurement, but the correct term in other languages may be singular.
338	#: ../src/commands.c:340
339	#: n:37
340	#, c-format
341	msgid "Invalid units “%s” for quantity"
342	msgstr ""
343
344	#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all
345	#. errors there take a filename parameter - we don’t really want it here,
346	#. so lose it with "%.0s" (which should display 0 characters from the
347	#. filename) FIXME: sort out this
348	#: ../src/img_hosted.c:35
349	#: n:38
350	msgid "Out of memory %.0s"
351	msgstr "Kehabisan memori %.0s"
352
353	#: ../src/commands.c:403
354	#: n:39
355	#, c-format
356	msgid "Unknown instrument “%s”"
357	msgstr "Instrumen tidak diketahui “%s”"
358
359	#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
360	#. translate
361	#: ../src/commands.c:1456
362	#: n:40
363	msgid "Scale factor must be 1.0 for DECLINATION"
364	msgstr ""
365
366	#. TRANSLATORS: If the scale factor for an instrument is zero, then any
367	#. reading would be mapped to zero, which doesn't make sense.
368	#: ../src/commands.c:1462
369	#: n:391
370	msgid "Scale factor must be non-zero"
371	msgstr ""
372
373	#: ../src/commands.c:1507
374	#: n:41
375	#, c-format
376	msgid "Unknown setting “%s”"
377	msgstr "Pengaturan tidak dikenal “%s”"
378
379	#: ../src/commands.c:448
380	#: n:42
381	#, c-format
382	msgid "Unknown character class “%s”"
383	msgstr "Klas karakter tidak dikenal “%s”"
384
385	#: ../src/extend.c:604
386	#: ../src/netskel.c:90
387	#: n:43
388	msgid "No survey data"
389	msgstr "Tidak ada data survei"
390
391	#: ../src/filename.c:52
392	#: ../src/img_hosted.c:36
393	#: n:44
394	#, c-format
395	msgid "Filename “%s” refers to directory"
396	msgstr ""
397
398	#: ../src/netartic.c:384
399	#: n:45
400	msgid "Survey not all connected to fixed stations"
401	msgstr ""
402
403	#: ../src/commands.c:854
404	#: ../src/datain.c:679
405	#: n:46
406	msgid "Station already fixed or equated to a fixed point"
407	msgstr ""
408
409	#: ../src/cavern.c:298
410	#: ../src/filename.c:55
411	#: ../src/img_hosted.c:37
412	#: n:47
413	#, c-format
414	msgid "Failed to open output file “%s”"
415	msgstr "Gagal membuka “%s” untuk menulis"
416
417	#: ../src/commands.c:1562
418	#: n:48
419	msgid "Standard deviation must be positive"
420	msgstr ""
421
422	#. TRANSLATORS: as in: Usage: cavern …
423	#: ../src/cmdline.c:168
424	#: n:49
425	msgid "Usage"
426	msgstr "Penggunaan"
427
428	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
429	#. "survey stations".
430	#.
431	#. %s is replaced by the name of the station.
432	#: ../src/netbits.c:333
433	#: n:50
434	#, c-format
435	msgid "Survey leg with same station (“%s”) at both ends - typing error?"
436	msgstr ""
437
438	#. TRANSLATORS: Degrees are the angular measurement where there are
439	#. 360 in a full circle.
440	#: ../src/datain.c:965
441	#: ../src/datain.c:973
442	#: ../src/datain.c:985
443	#: n:51
444	msgid "Clino reading over 90 degrees (absolute value)"
445	msgstr ""
446
447	#: ../src/netbits.c:422
448	#: n:52
449	#, c-format
450	msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
451	msgstr ""
452
453	#. TRANSLATORS: "equal" as in:
454	#.
455	#. *fix a 1 2 3
456	#. *fix b 1 2 3
457	#. *equate a b
458	#: ../src/netbits.c:433
459	#: n:53
460	#, c-format
461	msgid "Equating two equal fixed points: “%s” and “%s”"
462	msgstr ""
463
464	#. TRANSLATORS: " *fix a " gives this message:
465	#: ../src/commands.c:741
466	#: n:54
467	msgid "FIX command with no coordinates - fixing at (0,0,0)"
468	msgstr ""
469
470	#. TRANSLATORS: fix a 1 2 3 / fix a 1 2 3
471	#: ../src/commands.c:858
472	#: ../src/datain.c:681
473	#: n:55
474	msgid "Station already fixed at the same coordinates"
475	msgstr ""
476
477	#. TRANSLATORS: Emitted after second and subsequent "FIX command with
478	#. no coordinates - fixing at (0,0,0)" warnings.
479	#: ../src/commands.c:749
480	#: n:441
481	#, c-format
482	msgid "Already had FIX command with no coordinates for station “%s”"
483	msgstr ""
484
485	#: ../src/commands.c:1662
486	#: n:442
487	#, c-format
488	msgid "Station “%s” fixed before CS command first used"
489	msgstr ""
490
491	#. TRANSLATORS: The EXPORT command is only valid just after BEGIN
492	#. <SURVEY>, so this would generate this error:
493	#.
494	#. *begin fred
495	#. 1 2 1.23 045 -6
496	#. *export 2
497	#. *end fred
498	#: ../src/commands.c:2135
499	#: n:57
500	msgid "EXPORT must immediately follow “BEGIN <SURVEY>”"
501	msgstr ""
502
503	#: ../src/readval.c:512
504	#: n:58
505	msgid "Invalid year (< 1900 or > 2078)"
506	msgstr ""
507
508	#. TRANSLATORS: Suspicious means something like 410 degrees or -20
509	#. degrees
510	#: ../src/datain.c:863
511	#: ../src/datain.c:872
512	#: n:59
513	msgid "Suspicious compass reading"
514	msgstr ""
515
516	#: ../src/datain.c:1502
517	#: n:60
518	msgid "Negative tape reading"
519	msgstr ""
520
521	#: ../src/commands.c:736
522	#: n:61
523	msgid "Same station fixed twice with no coordinates"
524	msgstr ""
525
526	#. TRANSLATORS: This means that the data fed in said this.
527	#.
528	#. It could be a gross error (e.g. the decimal point is missing from the
529	#. depth gauge reading) or it could just be due to random error on a near
530	#. vertical leg
531	#: ../src/datain.c:1201
532	#: n:62
533	msgid "Tape reading is less than change in depth"
534	msgstr ""
535
536	#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
537	#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
538	#. neither style nor reading is a keyword in the program This error
539	#. complains about a depth gauge reading in normal style, for example
540	#: ../src/commands.c:1178
541	#: n:63
542	#, c-format
543	msgid "Reading “%s” not allowed in data style “%s”"
544	msgstr ""
545
546	#. TRANSLATORS: i.e. not enough readings for the style.
547	#: ../src/commands.c:1363
548	#: n:64
549	#, c-format
550	msgid "Too few readings for data style “%s”"
551	msgstr ""
552
553	#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
554	#: ../src/commands.c:1138
555	#: n:65
556	#, c-format
557	msgid "Data style “%s” unknown"
558	msgstr ""
559
560	#. TRANSLATORS: Here "station" is a survey station, not a train station.
561	#.
562	#. Exporting a station twice gives this error:
563	#.
564	#. *begin example
565	#. *export 1
566	#. *export 1
567	#. 1 2 1.24 045 -6
568	#. *end example
569	#: ../src/commands.c:1008
570	#: n:66
571	#, c-format
572	msgid "Station “%s” already exported"
573	msgstr ""
574
575	#. TRANSLATORS: complains about a situation like trying to define
576	#. two from stations per leg
577	#: ../src/commands.c:1204
578	#: n:67
579	#, c-format
580	msgid "Duplicate reading “%s”"
581	msgstr ""
582
583	#: ../src/commands.c:885
584	#: n:68
585	#, c-format
586	msgid "FLAG “%s” unknown"
587	msgstr "FLAG “%s” tidak dikenali"
588
589	#: ../src/readval.c:469
590	#: n:69
591	msgid "Missing \""
592	msgstr "\" hilang"
593
594	#. TRANSLATORS: Here "station" is a survey station, not a train station.
595	#: ../src/listpos.c:119
596	#: n:70
597	#, c-format
598	msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
599	msgstr ""
600
601	#. TRANSLATORS: Here "station" is a survey station, not a train
602	#. station.
603	#: ../src/netartic.c:396
604	#: n:71
605	msgid "The following survey stations are not attached to a fixed point:"
606	msgstr ""
607
608	#: ../src/netskel.c:135
609	#: n:72
610	#, c-format
611	msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
612	msgstr ""
613
614	#. TRANSLATORS: fixed survey station that is not part of any survey
615	#: ../src/netskel.c:958
616	#: n:73
617	#, c-format
618	msgid "Unused fixed point “%s”"
619	msgstr ""
620
621	#: ../src/matrix.c:123
622	#: n:74
623	msgid "Network solved by reduction - no simultaneous equations to solve."
624	msgstr ""
625
626	#: ../src/matrix.c:134
627	#: n:75
628	#, c-format
629	msgid "Solving %d simultaneous equations"
630	msgstr ""
631
632	#: ../src/commands.c:1266
633	#: n:77
634	#, c-format
635	msgid "Reading “%s” duplicates previous reading(s)"
636	msgstr ""
637
638	#: ../src/matrix.c:132
639	#: n:78
640	msgid "Solving one equation"
641	msgstr ""
642
643	#: ../src/datain.c:936
644	#: ../src/datain.c:1190
645	#: ../src/datain.c:1383
646	#: n:79
647	msgid "Negative adjusted tape reading"
648	msgstr ""
649
650	#: ../src/commands.c:2043
651	#: ../src/commands.c:2063
652	#: n:80
653	msgid "Date is in the future!"
654	msgstr ""
655
656	#: ../src/commands.c:2067
657	#: n:81
658	msgid "End of date range is before the start"
659	msgstr ""
660
661	#: ../src/avenprcore.cc:125
662	#: n:82
663	#, c-format
664	msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
665	msgstr ""
666
667	#. TRANSLATORS: e.g. the user specifies a passage cross-section at
668	#. station "entrance.27", but there is no station "entrance.27" in
669	#. the centre-line.
670	#: ../src/netskel.c:1046
671	#: n:83
672	#, c-format
673	msgid "Cross section specified at non-existent station “%s”"
674	msgstr ""
675
676	#. TRANSLATORS: In data with backsights, the user has tried to give a
677	#. plumb for the foresight and a clino reading for the backsight, or
678	#. something similar.
679	#: ../src/datain.c:1002
680	#: ../src/datain.c:1026
681	#: n:84
682	msgid "CLINO and BACKCLINO readings must be of the same type"
683	msgstr ""
684
685	#: ../src/avenprcore.cc:120
686	#: n:85
687	#, c-format
688	msgid "Parameter “%s” missing in printer configuration file"
689	msgstr ""
690
691	#: ../src/readval.c:520
692	#: n:86
693	msgid "Invalid month"
694	msgstr ""
695
696	#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
697	#: ../src/readval.c:529
698	#: n:87
699	msgid "Invalid day of the month"
700	msgstr ""
701
702	#: ../src/cavern.c:247
703	#: n:88
704	#, c-format
705	msgid "3d file format versions %d to %d supported"
706	msgstr ""
707
708	#, c-format
709	#~ msgid "Error in format of font file “%s”"
710	#~ msgstr ""
711
712	#: ../src/readval.c:200
713	#: n:89
714	msgid "Expecting survey name"
715	msgstr ""
716
717	#. TRANSLATORS: Program will exit shortly after printing this
718	#: ../src/message.c:227
719	#: n:90
720	msgid "Abnormal termination"
721	msgstr ""
722
723	#: ../src/message.c:228
724	#: n:91
725	msgid "Arithmetic error"
726	msgstr ""
727
728	#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
729	#. opcodes -- corrupted program?
730	#: ../src/message.c:231
731	#: n:92
732	msgid "Illegal instruction"
733	msgstr "Instruksi tidak legal"
734
735	#: ../src/datain.c:399
736	#: ../src/extend.c:553
737	#: ../src/img_hosted.c:30
738	#: ../src/mainfrm.cc:387
739	#: ../src/printwx.cc:1530
740	#: ../src/sorterr.c:146
741	#: n:24
742	#, c-format
743	msgid "Couldn’t open file “%s”"
744	msgstr "Tidak bisa membuka berkas “%s”"
745
746	#: ../src/printwx.cc:636
747	#: n:402
748	#, c-format
749	msgid "Couldn’t write file “%s”"
750	msgstr "Gagal membuka “%s” untuk menulis"
751
752	#: ../src/message.c:232
753	#: n:94
754	msgid "Bad memory access"
755	msgstr ""
756
757	#. TRANSLATORS: If you're unsure what "deprecated" means, see:
758	#. http://en.wikipedia.org/wiki/Deprecation
759	#: ../src/commands.c:467
760	#: ../src/commands.c:540
761	#: ../src/commands.c:562
762	#: ../src/commands.c:1153
763	#: ../src/commands.c:1490
764	#: ../src/readval.c:96
765	#: n:95
766	msgid "Further uses of this deprecated feature will not be reported"
767	msgstr ""
768
769	#: ../src/message.c:233
770	#: n:97
771	msgid "Unknown signal received"
772	msgstr ""
773
774	#. TRANSLATORS: Degrees are the angular measurement where there are
775	#. 360 in a full circle.
776	#: ../src/datain.c:902
777	#: n:98
778	#, c-format
779	msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
780	msgstr ""
781
782	#. TRANSLATORS: Degrees are the angular measurement where
783	#. there are 360 in a full circle.
784	#: ../src/datain.c:1078
785	#: n:99
786	#, c-format
787	msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
788	msgstr ""
789
790	#: ../src/cad3d.c:661
791	#: n:100
792	msgid "do not generate station markers"
793	msgstr ""
794
795	#: ../src/cad3d.c:662
796	#: n:101
797	msgid "do not generate station labels"
798	msgstr ""
799
800	#: ../src/cad3d.c:663
801	#: n:102
802	msgid "do not generate survey legs"
803	msgstr ""
804
805	#: ../src/cad3d.c:667
806	#: n:103
807	msgid "produce an elevation view"
808	msgstr ""
809
810	#: ../src/commands.c:1150
811	#: n:104
812	#, c-format
813	msgid "“data %s %c …” is deprecated - use “data %s …” instead"
814	msgstr ""
815
816	#: ../src/extend.c:506
817	#: n:105
818	msgid "Reading in data - please wait…"
819	msgstr ""
820
821	#. TRANSLATORS: Perhaps the user tried to load a different type of file as
822	#. a Survex .3d file, or the .3d file was corrupted.
823	#: ../src/3dtopos.c:157
824	#: ../src/3dtopos.c:163
825	#: ../src/cad3d.c:905
826	#: ../src/cad3d.c:916
827	#: ../src/img_hosted.c:40
828	#: n:106
829	#, c-format
830	msgid "Bad 3d image file “%s”"
831	msgstr ""
832
833	#. TRANSLATORS: This is the date format string used to timestamp .3d
834	#. files internally. Probably best to keep it the same for all
835	#. translations.
836	#: ../src/img.c:43
837	#: ../src/mainfrm.cc:1412
838	#: n:107
839	#, c-format
840	msgid "%a,%Y.%m.%d %H:%M:%S %Z"
841	msgstr ""
842
843	#. TRANSLATORS: used a processed survey with no processing date/time info
844	#: ../src/mainfrm.cc:1405
845	#: n:108
846	msgid "Date and time not available."
847	msgstr ""
848
849	#: ../src/img_hosted.c:41
850	#: n:109
851	#, c-format
852	msgid "Error reading from file “%s”"
853	msgstr "Kesalahan membaca berkas “%s”"
854
855	#: ../src/filename.c:79
856	#: ../src/img_hosted.c:42
857	#: ../src/mainfrm.cc:345
858	#: ../src/mainfrm.cc:1920
859	#: n:110
860	#, c-format
861	msgid "Error writing to file “%s”"
862	msgstr "Galat saat menulis ke berkas “%s”"
863
864	#: ../src/filename.c:82
865	#: n:111
866	msgid "Error writing to file"
867	msgstr "Galat saat menulis ke berkas"
868
869	#: ../src/sorterr.c:81
870	#: ../src/sorterr.c:98
871	#: ../src/sorterr.c:170
872	#: n:112
873	msgid "Couldn’t parse .err file"
874	msgstr ""
875
876	#: ../src/cavern.c:388
877	#: n:113
878	#, c-format
879	msgid "There were %d warning(s) and %d error(s) - no output files produced."
880	msgstr ""
881
882	#: ../src/img_hosted.c:43
883	#: n:114
884	#, c-format
885	msgid "File “%s” has a newer format than this program can understand"
886	msgstr ""
887
888	#: ../src/printwx.cc:982
889	#: n:115
890	msgid "North"
891	msgstr "Utara"
892
893	#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
894	#: ../src/printwx.cc:1009
895	#: n:116
896	msgid "Elevation on"
897	msgstr ""
898
899	#: ../src/printwx.cc:441
900	#: n:117
901	msgid "P&lan view"
902	msgstr ""
903
904	#: ../src/printwx.cc:443
905	#: n:285
906	msgid "&Elevation"
907	msgstr ""
908
909	#: ../src/gfxcore.cc:802
910	#: ../src/mainfrm.cc:128
911	#: n:118
912	msgid "Elevation"
913	msgstr ""
914
915	#. TRANSLATORS: Label used for "clino" in Aven when the view is
916	#. from directly above.
917	#: ../src/gfxcore.cc:714
918	#: n:432
919	msgid "Plan"
920	msgstr ""
921
922	#. TRANSLATORS: Label used for "clino" in Aven when the view is
923	#. from directly below.
924	#: ../src/gfxcore.cc:724
925	#: n:433
926	msgid "Kiwi Plan"
927	msgstr ""
928
929	#: ../src/cavern.c:352
930	#: n:120
931	msgid "Calculating statistics"
932	msgstr ""
933
934	#: ../src/readval.c:483
935	#: n:121
936	msgid "Expecting string field"
937	msgstr ""
938
939	#: ../src/cmdline.c:212
940	#: n:122
941	msgid "too few arguments"
942	msgstr "parameternya kurang"
943
944	#: ../src/cmdline.c:219
945	#: n:123
946	msgid "too many arguments"
947	msgstr "parameternya terlalu banyak"
948
949	#: ../src/cmdline.c:178
950	#: ../src/cmdline.c:181
951	#: ../src/cmdline.c:185
952	#: n:124
953	msgid "FILE"
954	msgstr "BERKAS"
955
956	#. TRANSLATORS: In French, Eric chose to use the terminology used by
957	#. toporobot: "sequence" for the English "traverse", which makes sense
958	#. (although toporobot actually uses this term to mean something more
959	#. specific). Feel free to follow this lead if you can't think of a better
960	#. term - these messages mostly indicate how processing is progressing.
961	#.
962	#. A trailing traverse is a dead end back to a junction.
963	#: ../src/netskel.c:177
964	#: n:125
965	msgid "Removing trailing traverses"
966	msgstr ""
967
968	#. TRANSLATORS: In French, Eric chose to use the terminology used by
969	#. toporobot: "sequence" for the English "traverse", which makes sense
970	#. (although toporobot actually uses this term to mean something more
971	#. specific). Feel free to follow this lead if you can't think of a better
972	#. term - these messages mostly indicate how processing is progressing.
973	#: ../src/netskel.c:236
974	#: n:126
975	msgid "Concatenating traverses"
976	msgstr ""
977
978	#. TRANSLATORS: In French, Eric chose to use the terminology used by
979	#. toporobot: "sequence" for the English "traverse", which makes sense
980	#. (although toporobot actually uses this term to mean something more
981	#. specific). Feel free to follow this lead if you can't think of a better
982	#. term - these messages mostly indicate how processing is progressing.
983	#: ../src/netskel.c:434
984	#: n:127
985	msgid "Calculating traverses"
986	msgstr ""
987
988	#. TRANSLATORS: In French, Eric chose to use the terminology used by
989	#. toporobot: "sequence" for the English "traverse", which makes sense
990	#. (although toporobot actually uses this term to mean something more
991	#. specific). Feel free to follow this lead if you can't think of a better
992	#. term - these messages mostly indicate how processing is progressing.
993	#.
994	#. A trailing traverse is a dead end back to a junction.
995	#: ../src/netskel.c:779
996	#: n:128
997	msgid "Calculating trailing traverses"
998	msgstr ""
999
1000	#: ../src/network.c:82
1001	#: n:129
1002	msgid "Simplifying network"
1003	msgstr ""
1004
1005	#: ../src/network.c:540
1006	#: n:130
1007	msgid "Calculating network"
1008	msgstr ""
1009
1010	#: ../src/datain.c:1492
1011	#: n:131
1012	#, c-format
1013	msgid "Found “%s”, expecting “F” or “B”"
1014	msgstr ""
1015
1016	#: ../src/cavern.c:449
1017	#: n:132
1018	#, c-format
1019	msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
1020	msgstr ""
1021
1022	#: ../src/cavern.c:452
1023	#: n:133
1024	#, c-format
1025	msgid "Total plan length of survey legs = %7.2fm"
1026	msgstr ""
1027
1028	#: ../src/cavern.c:455
1029	#: n:134
1030	#, c-format
1031	msgid "Total vertical length of survey legs = %7.2fm"
1032	msgstr ""
1033
1034	#. TRANSLATORS: numbers are altitudes of highest and lowest stations
1035	#: ../src/cavern.c:462
1036	#: n:135
1037	#, c-format
1038	msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1039	msgstr ""
1040
1041	#. TRANSLATORS: c.f. previous message
1042	#: ../src/cavern.c:464
1043	#: n:136
1044	#, c-format
1045	msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1046	msgstr ""
1047
1048	#. TRANSLATORS: c.f. previous two messages
1049	#: ../src/cavern.c:466
1050	#: n:137
1051	#, c-format
1052	msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
1053	msgstr ""
1054
1055	#: ../src/cavern.c:434
1056	#: n:138
1057	msgid "There is 1 loop."
1058	msgstr ""
1059
1060	#: ../src/cavern.c:436
1061	#: n:139
1062	#, c-format
1063	msgid "There are %ld loops."
1064	msgstr ""
1065
1066	#: ../src/cavern.c:374
1067	#: n:140
1068	#, c-format
1069	msgid "CPU time used %5.2fs"
1070	msgstr ""
1071
1072	#: ../src/cavern.c:377
1073	#: n:141
1074	#, c-format
1075	msgid "Time used %5.2fs"
1076	msgstr ""
1077
1078	#: ../src/cavern.c:379
1079	#: n:142
1080	msgid "Time used unavailable"
1081	msgstr ""
1082
1083	#: ../src/cavern.c:382
1084	#: n:143
1085	#, c-format
1086	msgid "Time used %5.2fs (%5.2fs CPU time)"
1087	msgstr ""
1088
1089	#: ../src/netskel.c:744
1090	#: n:145
1091	#, c-format
1092	msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1093	msgstr ""
1094
1095	#: ../src/netskel.c:747
1096	#: n:146
1097	#, fuzzy, c-format
1098	msgid "Error %6.2f%%"
1099	msgstr "Kesalahan %6.2f%%"
1100
1101	#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1102	#. traverse has zero length, so error per metre is meaningless.
1103	#.
1104	#. There should be 4 spaces between "Error" and "N/A" so that it lines
1105	#. up with the numbers in the message above.
1106	#: ../src/netskel.c:754
1107	#: n:147
1108	#, fuzzy
1109	msgid "Error N/A"
1110	msgstr "Kesalahan N/A"
1111
1112	#: ../src/cad3d.c:664
1113	#: n:148
1114	#, c-format
1115	msgid "generate grid (default %sm)"
1116	msgstr ""
1117
1118	#: ../src/cad3d.c:665
1119	#: n:149
1120	#, c-format
1121	msgid "station labels text height (default %s)"
1122	msgstr ""
1123
1124	#: ../src/cad3d.c:666
1125	#: n:152
1126	#, c-format
1127	msgid "station marker size (default %s)"
1128	msgstr ""
1129
1130	#: ../src/cad3d.c:668
1131	#: n:155
1132	#, c-format
1133	msgid "factor to scale down by (default %s)"
1134	msgstr ""
1135
1136	#: ../src/cad3d.c:669
1137	#: n:156
1138	msgid "produce DXF output"
1139	msgstr ""
1140
1141	#: ../src/cad3d.c:670
1142	#: n:158
1143	msgid "produce Skencil output"
1144	msgstr ""
1145
1146	#: ../src/cad3d.c:671
1147	#: n:159
1148	msgid "produce Compass PLT output for Carto"
1149	msgstr ""
1150
1151	#: ../src/cad3d.c:672
1152	#: n:160
1153	msgid "produce SVG output"
1154	msgstr ""
1155
1156	#. TRANSLATORS: description of --help option
1157	#: ../src/cmdline.c:138
1158	#: n:150
1159	msgid "display this help and exit"
1160	msgstr ""
1161
1162	#. TRANSLATORS: description of --verbose option
1163	#: ../src/cmdline.c:141
1164	#: n:151
1165	msgid "output version information and exit"
1166	msgstr "keluarkan informasi versi dan keluar"
1167
1168	#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1169	#: ../src/cmdline.c:170
1170	#: n:153
1171	msgid "OPTION"
1172	msgstr "OPSI"
1173
1174	#: ../src/mainfrm.cc:132
1175	#: ../src/printwx.cc:389
1176	#: ../src/printwx.cc:1054
1177	#: ../src/printwx.cc:1103
1178	#: n:154
1179	msgid "Scale"
1180	msgstr ""
1181
1182	#: ../src/cmdline.c:194
1183	#: n:157
1184	#, c-format
1185	msgid "Try “%s --help” for more information.\n"
1186	msgstr ""
1187
1188	#: ../src/avenprcore.cc:269
1189	#: n:166
1190	#, c-format
1191	msgid "Page %d of %d"
1192	msgstr "Halaman %d dari %d"
1193
1194	#: ../src/avenprcore.cc:272
1195	#: ../src/printwx.cc:1536
1196	#: n:167
1197	#, fuzzy, c-format
1198	msgid "Survey “%s” Page %d (of %d) Processed on %s"
1199	msgstr "Survey “%s” Halaman %d dari %d Processed on %s"
1200
1201	#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1202	#. something like "123°". The bearing is up the page.
1203	#: ../src/printwx.cc:990
1204	#: n:168
1205	#, c-format
1206	msgid "Plan view, %s up page"
1207	msgstr ""
1208
1209	#. TRANSLATORS: This is used on printouts of elevations, with %s
1210	#. replaced by something like "123°". The bearing is the direction
1211	#. we’re looking.
1212	#: ../src/printwx.cc:1028
1213	#: n:169
1214	#, c-format
1215	msgid "Elevation facing %s"
1216	msgstr ""
1217
1218	#. TRANSLATORS: This is used on printouts of tilted elevations, with
1219	#. the first %s replaced by something like "123°", and the second by
1220	#. something like "-45°". The bearing is the direction we’re
1221	#. looking.
1222	#: ../src/printwx.cc:1037
1223	#: n:284
1224	#, c-format
1225	msgid "Elevation facing %s, tilted %s"
1226	msgstr ""
1227
1228	#. TRANSLATORS: This is used on printouts of extended elevations.
1229	#: ../src/printwx.cc:1046
1230	#: n:191
1231	msgid "Extended elevation"
1232	msgstr ""
1233
1234	#: ../src/cavern.c:420
1235	#: n:172
1236	msgid "Survey contains 1 survey station,"
1237	msgstr ""
1238
1239	#: ../src/cavern.c:422
1240	#: n:173
1241	#, c-format
1242	msgid "Survey contains %ld survey stations,"
1243	msgstr ""
1244
1245	#: ../src/cavern.c:426
1246	#: n:174
1247	msgid " joined by 1 leg."
1248	msgstr ""
1249
1250	#: ../src/cavern.c:428
1251	#: n:175
1252	#, c-format
1253	msgid " joined by %ld legs."
1254	msgstr ""
1255
1256	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1257	#: ../src/listpos.c:182
1258	#: n:176
1259	msgid "node"
1260	msgstr "node"
1261
1262	#. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1263	#: ../src/listpos.c:184
1264	#: n:177
1265	msgid "nodes"
1266	msgstr "node"
1267
1268	#. TRANSLATORS: "Connected component" in the graph theory sense - it
1269	#. means there are %ld bits of survey with no connections between them.
1270	#. This message is only used if there are more than 1.
1271	#: ../src/cavern.c:445
1272	#: n:178
1273	#, c-format
1274	msgid "Survey has %ld connected components."
1275	msgstr ""
1276
1277	#. TRANSLATORS: Label for button in aven’s cavern log window which
1278	#. causes the survey data to be reprocessed.
1279	#: ../src/cavernlog.cc:400
1280	#: ../src/cavernlog.cc:411
1281	#: n:184
1282	msgid "Reprocess"
1283	msgstr ""
1284
1285	#: ../src/cmdline.c:242
1286	#: ../src/cmdline.c:261
1287	#: n:185
1288	#, c-format
1289	msgid "numeric argument “%s” out of range"
1290	msgstr ""
1291
1292	#: ../src/cmdline.c:244
1293	#: n:186
1294	#, c-format
1295	msgid "argument “%s” not an integer"
1296	msgstr ""
1297
1298	#: ../src/cmdline.c:263
1299	#: n:187
1300	#, c-format
1301	msgid "argument “%s” not a number"
1302	msgstr ""
1303
1304	#: ../src/commands.c:900
1305	#: n:188
1306	msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1307	msgstr ""
1308
1309	#: ../src/commands.c:903
1310	#: n:189
1311	msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1312	msgstr ""
1313
1314	#: ../src/listpos.c:82
1315	#: n:190
1316	#, c-format
1317	msgid "Station “%s” referred to by entrance or export but never used"
1318	msgstr ""
1319
1320	#: ../src/commands.c:646
1321	#: n:192
1322	msgid "No matching BEGIN"
1323	msgstr ""
1324
1325	#. TRANSLATORS: BEGIN <survey> and END <survey> should have the
1326	#. same <survey> if it’s given at all
1327	#: ../src/commands.c:674
1328	#: n:193
1329	msgid "Survey name doesn’t match BEGIN"
1330	msgstr ""
1331
1332	#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1333	#. END command omits it, e.g.:
1334	#.
1335	#. *begin entrance
1336	#. 1 2 10.00 178 -01
1337	#. *end <--[Message given here]
1338	#: ../src/commands.c:683
1339	#: n:194
1340	msgid "Survey name omitted from END"
1341	msgstr ""
1342
1343	#. TRANSLATORS: Heading line for .pos file. Please try to ensure the “,”s
1344	#. (or at least the columns) are in the same place
1345	#: ../src/3dtopos.c:112
1346	#: n:195
1347	msgid "( Easting, Northing, Altitude )"
1348	msgstr ""
1349
1350	#. TRANSLATORS: bpp is "Bits Per Pixel"
1351	#: ../src/aboutdlg.cc:181
1352	#: n:196
1353	#, c-format
1354	msgid "Display Depth: %d bpp"
1355	msgstr ""
1356
1357	#. TRANSLATORS: appended to previous message if the display is colour
1358	#: ../src/aboutdlg.cc:183
1359	#: n:197
1360	msgid " (colour)"
1361	msgstr " (warna)"
1362
1363	#: ../src/readval.c:508
1364	#: ../src/readval.c:518
1365	#: ../src/readval.c:526
1366	#: n:198
1367	#, c-format
1368	msgid "Expecting date, found “%s”"
1369	msgstr ""
1370
1371	#. TRANSLATORS: --help output for --survey option.
1372	#.
1373	#. "this" has been added to English translation
1374	#: ../src/3dtopos.c:50
1375	#: ../src/aven.cc:66
1376	#: ../src/cad3d.c:660
1377	#: ../src/diffpos.c:57
1378	#: ../src/dump3d.c:49
1379	#: ../src/extend.c:458
1380	#: n:199
1381	msgid "only load the sub-survey with this prefix"
1382	msgstr ""
1383
1384	#. TRANSLATORS: --help output for aven --print option
1385	#: ../src/aven.cc:68
1386	#: n:119
1387	msgid "print and exit (requires a 3d file)"
1388	msgstr ""
1389
1390	#. TRANSLATORS: --help output for cavern --percentage option
1391	#: ../src/cavern.c:125
1392	#: n:161
1393	msgid "display percentage progress"
1394	msgstr ""
1395
1396	#. TRANSLATORS: --help output for cavern --output option
1397	#: ../src/cavern.c:127
1398	#: n:162
1399	msgid "set location for output files"
1400	msgstr ""
1401
1402	#. TRANSLATORS: --help output for cavern --quiet option
1403	#: ../src/cavern.c:129
1404	#: n:163
1405	msgid "only show brief summary (-qq for errors only)"
1406	msgstr ""
1407
1408	#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1409	#: ../src/cavern.c:131
1410	#: n:164
1411	msgid "do not create .err file"
1412	msgstr ""
1413
1414	#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1415	#: ../src/cavern.c:133
1416	#: n:165
1417	msgid "turn warnings into errors"
1418	msgstr ""
1419
1420	#. TRANSLATORS: --help output for cavern --log option
1421	#: ../src/cavern.c:135
1422	#: n:170
1423	msgid "log output to .log file"
1424	msgstr ""
1425
1426	#. TRANSLATORS: --help output for cavern --3d-version option
1427	#: ../src/cavern.c:137
1428	#: n:171
1429	msgid "specify the 3d file format version to output"
1430	msgstr ""
1431
1432	#. TRANSLATORS: --help output for sorterr --horizontal option
1433	#: ../src/sorterr.c:53
1434	#: n:179
1435	msgid "sort by horizontal error factor"
1436	msgstr ""
1437
1438	#. TRANSLATORS: --help output for sorterr --vertical option
1439	#: ../src/sorterr.c:55
1440	#: n:180
1441	msgid "sort by vertical error factor"
1442	msgstr ""
1443
1444	#. TRANSLATORS: --help output for sorterr --percentage option
1445	#: ../src/sorterr.c:57
1446	#: n:181
1447	msgid "sort by percentage error"
1448	msgstr ""
1449
1450	#. TRANSLATORS: --help output for sorterr --per-leg option
1451	#: ../src/sorterr.c:59
1452	#: n:182
1453	msgid "sort by error per leg"
1454	msgstr ""
1455
1456	#. TRANSLATORS: --help output for sorterr --replace option
1457	#: ../src/sorterr.c:61
1458	#: n:183
1459	msgid "replace .err file with resorted version"
1460	msgstr ""
1461
1462	#. TRANSLATORS: --help output for dump3d --rewind option
1463	#: ../src/dump3d.c:51
1464	#: n:204
1465	msgid "rewind file and read it a second time"
1466	msgstr ""
1467
1468	#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1469	#. meaningless to say your tape is marked in "0 feet" (but you might
1470	#. measure distance by counting knots on a diving line, and tie them
1471	#. every "2 feet").
1472	#: ../src/commands.c:1410
1473	#: n:200
1474	msgid "*UNITS factor must be non-zero"
1475	msgstr ""
1476
1477	#. TRANSLATORS: In the "File" menu
1478	#: ../src/mainfrm.cc:769
1479	#: n:201
1480	msgid "&Screenshot…"
1481	msgstr ""
1482
1483	#: ../src/mainfrm.cc:1422
1484	#: n:202
1485	#, c-format
1486	msgid "No survey data in 3d file “%s”"
1487	msgstr ""
1488
1489	#: ../src/gfxcore.cc:704
1490	#: n:203
1491	msgid "Facing"
1492	msgstr ""
1493
1494	#. TRANSLATORS: for the title of the About box
1495	#: ../src/aboutdlg.cc:70
1496	#: n:205
1497	#, c-format
1498	msgid "About %s"
1499	msgstr "Tetang %s"
1500
1501	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1502	#. - it should be translated to the terminology that cavers using the
1503	#. language would use.
1504	#.
1505	#. File->Open dialog:
1506	#: ../src/mainfrm.cc:1892
1507	#: n:206
1508	msgid "Select a survey file to view"
1509	msgstr ""
1510
1511	#: ../src/mainfrm.cc:1871
1512	#: n:207
1513	msgid "Survex 3d files"
1514	msgstr ""
1515
1516	#: ../src/mainfrm.cc:1884
1517	#: ../src/mainfrm.cc:2316
1518	#: ../src/printwx.cc:616
1519	#: n:208
1520	msgid "All files"
1521	msgstr "Semua berkas"
1522
1523	#. TRANSLATORS: Here "survey" is a "cave map" rather than
1524	#. list of questions - it should be translated to the
1525	#. terminology that cavers using the language would use.
1526	#: ../src/mainfrm.cc:1870
1527	#: n:229
1528	msgid "All survey files"
1529	msgstr ""
1530
1531	#: ../src/mainfrm.cc:1872
1532	#: n:329
1533	msgid "Survex svx files"
1534	msgstr "Berkas Survex svx"
1535
1536	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
1537	#. surveying package, so probably shouldn’t be translated
1538	#: ../src/mainfrm.cc:1880
1539	#: n:330
1540	msgid "Compass DAT and MAK files"
1541	msgstr ""
1542
1543	#: ../src/printwx.cc:274
1544	#: n:411
1545	msgid "DXF files"
1546	msgstr "Berkas DXF"
1547
1548	#: ../src/printwx.cc:275
1549	#: n:412
1550	msgid "EPS files"
1551	msgstr "Berkas EPS"
1552
1553	#: ../src/printwx.cc:276
1554	#: n:413
1555	msgid "GPX files"
1556	msgstr "Berkas GPX"
1557
1558	#: ../src/printwx.cc:277
1559	#: n:414
1560	msgid "HPGL for plotters"
1561	msgstr ""
1562
1563	#: ../src/printwx.cc:278
1564	#: n:444
1565	msgid "KML files"
1566	msgstr "Berkas KML"
1567
1568	#: ../src/printwx.cc:279
1569	#: n:415
1570	msgid "Compass PLT for use with Carto"
1571	msgstr ""
1572
1573	#: ../src/printwx.cc:280
1574	#: n:416
1575	msgid "Skencil files"
1576	msgstr "Berkas Skencil"
1577
1578	#: ../src/printwx.cc:281
1579	#: n:417
1580	msgid "SVG files"
1581	msgstr "Berkas SVG"
1582
1583	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1584	#. - it should be translated to the terminology that cavers using the
1585	#. language would use.
1586	#.
1587	#. This string is used in the about box (summarising the purpose of aven).
1588	#: ../src/aboutdlg.cc:94
1589	#: n:209
1590	msgid "Survey visualisation tool"
1591	msgstr ""
1592
1593	#. TRANSLATORS: Aven menu titles. An “&” goes before the letter of any
1594	#. accelerator key. The accelerators must be different within this group
1595	#: ../src/mainfrm.cc:928
1596	#: n:210
1597	msgid "&File"
1598	msgstr "&Berkas"
1599
1600	#: ../src/mainfrm.cc:929
1601	#: n:211
1602	msgid "&Rotation"
1603	msgstr ""
1604
1605	#: ../src/mainfrm.cc:930
1606	#: n:212
1607	msgid "&Orientation"
1608	msgstr "&Orientasi"
1609
1610	#: ../src/mainfrm.cc:931
1611	#: n:213
1612	msgid "&View"
1613	msgstr "&Tilik"
1614
1615	#: ../src/mainfrm.cc:933
1616	#: n:214
1617	msgid "&Controls"
1618	msgstr ""
1619
1620	#: ../src/mainfrm.cc:942
1621	#: n:215
1622	msgid "&Help"
1623	msgstr "Ba&ntuan"
1624
1625	#: ../src/mainfrm.cc:935
1626	#: n:216
1627	msgid "&Presentation"
1628	msgstr ""
1629
1630	#: ../src/aboutdlg.cc:105
1631	#: n:219
1632	msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1633	msgstr ""
1634
1635	#. TRANSLATORS: Part of 3dtopos --help
1636	#: ../src/3dtopos.c:86
1637	#: n:217
1638	msgid "3D_FILE [POS_FILE]"
1639	msgstr ""
1640
1641	#. TRANSLATORS: Part of diffpos --help
1642	#: ../src/diffpos.c:265
1643	#: n:218
1644	msgid "FILE1 FILE2 [THRESHOLD]"
1645	msgstr ""
1646
1647	#. TRANSLATORS: Part of diffpos --help
1648	#: ../src/diffpos.c:267
1649	#: n:255
1650	#, c-format
1651	msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1652	msgstr ""
1653
1654	#. TRANSLATORS: Part of extend --help
1655	#: ../src/extend.c:480
1656	#: n:267
1657	msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1658	msgstr ""
1659
1660	#. TRANSLATORS: Part of sorterr --help
1661	#: ../src/sorterr.c:127
1662	#: n:268
1663	msgid "ERR_FILE [HOW_MANY]"
1664	msgstr ""
1665
1666	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1667	#. - it should be translated to the terminology that cavers using the
1668	#. language would use.
1669	#.
1670	#. Part of aven --help
1671	#: ../src/aven.cc:115
1672	#: ../src/aven.cc:139
1673	#: n:269
1674	msgid "[SURVEY_FILE]"
1675	msgstr ""
1676
1677	#. TRANSLATORS: Aven menu items. An “&” goes before the letter of any
1678	#. accelerator key.
1679	#.
1680	#. The string "\t" separates the menu text and any accelerator key.
1681	#.
1682	#. "File" menu. The accelerators must be different within this group.
1683	#. c.f. 201, 380, 381.
1684	#: ../src/mainfrm.cc:762
1685	#: n:220
1686	msgid "&Open…\tCtrl+O"
1687	msgstr "&Buka…\tCtrl+O"
1688
1689	#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
1690	#. are surveys without date information.
1691	#: ../src/gfxcore.cc:1047
1692	#: n:221
1693	msgid "Undated"
1694	msgstr "Tidak bertanggal"
1695
1696	#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1697	#. which aren’t part of a loop and so have no error information.
1698	#: ../src/gfxcore.cc:1071
1699	#: n:290
1700	msgid "Not in loop"
1701	msgstr ""
1702
1703	#. TRANSLATORS: error from:
1704	#.
1705	#. *data normal newline from to tape compass clino
1706	#: ../src/commands.c:1254
1707	#: n:222
1708	msgid "NEWLINE can’t be the first reading"
1709	msgstr ""
1710
1711	#. TRANSLATORS: error from:
1712	#.
1713	#. *data normal from to tape compass clino newline
1714	#: ../src/commands.c:1292
1715	#: n:223
1716	msgid "NEWLINE can’t be the last reading"
1717	msgstr ""
1718
1719	#. TRANSLATORS: Error given by something like:
1720	#.
1721	#. *data normal station tape compass clino
1722	#.
1723	#. ("station" signifies interleaved data).
1724	#: ../src/commands.c:1315
1725	#: n:224
1726	msgid "Interleaved readings, but no NEWLINE"
1727	msgstr ""
1728
1729	#. TRANSLATORS: caused by e.g.
1730	#.
1731	#. *data diving station newline depth tape compass
1732	#.
1733	#. ("depth" needs to occur before "newline").
1734	#: ../src/commands.c:1191
1735	#: n:225
1736	#, c-format
1737	msgid "Reading “%s” must occur before NEWLINE"
1738	msgstr ""
1739
1740	#. TRANSLATORS: e.g.
1741	#.
1742	#. *data normal from to tape newline compass clino
1743	#: ../src/commands.c:1244
1744	#: n:226
1745	msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1746	msgstr ""
1747
1748	#: ../src/commands.c:1444
1749	#: n:227
1750	msgid "Can’t calibrate angular and length quantities together"
1751	msgstr ""
1752
1753	#: ../src/commands.c:589
1754	#: n:397
1755	msgid "Bad *alias command"
1756	msgstr ""
1757
1758	#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
1759	#. height values).
1760	#~ msgid "Select a terrain file to view"
1761	#~ msgstr ""
1762
1763	#~ msgid "Terrain files"
1764	#~ msgstr ""
1765
1766	#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1767	#. currently)
1768	#: ../src/log.cc:32
1769	#: n:228
1770	#, c-format
1771	msgid "%s Error Log"
1772	msgstr ""
1773
1774	#. TRANSLATORS: The text on the action button in the "Export" settings
1775	#. dialog
1776	#: ../src/printwx.cc:575
1777	#: n:230
1778	msgid "&Export…"
1779	msgstr "&Ekspor…"
1780
1781	#. TRANSLATORS: "Rotation" menu. The accelerators must be different within
1782	#. this group. Tickable menu item which toggles auto rotation
1783	#: ../src/mainfrm.cc:784
1784	#: n:231
1785	msgid "Au&to-Rotate\tSpace"
1786	msgstr ""
1787
1788	#: ../src/mainfrm.cc:786
1789	#: n:232
1790	msgid "Speed &Up"
1791	msgstr ""
1792
1793	#: ../src/mainfrm.cc:787
1794	#: n:233
1795	msgid "Slow &Down"
1796	msgstr ""
1797
1798	#: ../src/mainfrm.cc:789
1799	#: n:234
1800	msgid "&Reverse Direction"
1801	msgstr ""
1802
1803	#: ../src/mainfrm.cc:791
1804	#: n:235
1805	msgid "Step Once &Anticlockwise"
1806	msgstr ""
1807
1808	#: ../src/mainfrm.cc:792
1809	#: n:236
1810	msgid "Step Once &Clockwise"
1811	msgstr ""
1812
1813	#. TRANSLATORS: View looking North
1814	#: ../src/gfxcore.cc:3217
1815	#: ../src/mainfrm.cc:795
1816	#: n:240
1817	msgid "View &North"
1818	msgstr ""
1819
1820	#. TRANSLATORS: View looking East
1821	#: ../src/gfxcore.cc:3219
1822	#: ../src/mainfrm.cc:796
1823	#: n:241
1824	msgid "View &East"
1825	msgstr ""
1826
1827	#. TRANSLATORS: View looking South
1828	#: ../src/gfxcore.cc:3221
1829	#: ../src/mainfrm.cc:797
1830	#: n:242
1831	msgid "View &South"
1832	msgstr ""
1833
1834	#. TRANSLATORS: View looking West
1835	#: ../src/gfxcore.cc:3223
1836	#: ../src/mainfrm.cc:798
1837	#: n:243
1838	msgid "View &West"
1839	msgstr ""
1840
1841	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1842	#. - it should be translated to the terminology that cavers using the
1843	#. language would use.
1844	#: ../src/mainfrm.cc:803
1845	#: n:244
1846	msgid "Shift Survey &Left"
1847	msgstr ""
1848
1849	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1850	#. - it should be translated to the terminology that cavers using the
1851	#. language would use.
1852	#: ../src/mainfrm.cc:807
1853	#: n:245
1854	msgid "Shift Survey &Right"
1855	msgstr ""
1856
1857	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1858	#. - it should be translated to the terminology that cavers using the
1859	#. language would use.
1860	#: ../src/mainfrm.cc:811
1861	#: n:246
1862	msgid "Shift Survey &Up"
1863	msgstr ""
1864
1865	#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1866	#. - it should be translated to the terminology that cavers using the
1867	#. language would use.
1868	#: ../src/mainfrm.cc:815
1869	#: n:247
1870	msgid "Shift Survey &Down"
1871	msgstr ""
1872
1873	#: ../src/gfxcore.cc:3237
1874	#: ../src/mainfrm.cc:817
1875	#: n:248
1876	msgid "&Plan View"
1877	msgstr ""
1878
1879	#: ../src/gfxcore.cc:3238
1880	#: ../src/mainfrm.cc:818
1881	#: n:249
1882	msgid "Ele&vation"
1883	msgstr ""
1884
1885	#: ../src/mainfrm.cc:820
1886	#: n:250
1887	msgid "&Higher Viewpoint"
1888	msgstr ""
1889
1890	#: ../src/mainfrm.cc:821
1891	#: n:251
1892	msgid "L&ower Viewpoint"
1893	msgstr ""
1894
1895	#: ../src/mainfrm.cc:824
1896	#: n:252
1897	msgid "&Zoom In\t]"
1898	msgstr "Per&besar\t]"
1899
1900	#: ../src/mainfrm.cc:825
1901	#: n:253
1902	msgid "Zoo&m Out\t["
1903	msgstr "Per&kecil\t["
1904
1905	#: ../src/mainfrm.cc:827
1906	#: n:254
1907	msgid "Restore De&fault View"
1908	msgstr ""
1909
1910	#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1911	#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1912	#. the "what to print/export" dialog.
1913	#: ../src/printwx.cc:353
1914	#: n:283
1915	msgid "View"
1916	msgstr "Tilik"
1917
1918	#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1919	#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1920	#. "Elements" isn’t a good name for this but nothing better has yet come to
1921	#. mind!
1922	#: ../src/printwx.cc:358
1923	#: n:256
1924	msgid "Elements"
1925	msgstr "Bagian"
1926
1927	#: ../src/printwx.cc:413
1928	#: ../src/printwx.cc:786
1929	#: n:257
1930	#, c-format
1931	msgid "%d pages (%dx%d)"
1932	msgstr "%d halaman (%dx%d)"
1933
1934	#. TRANSLATORS: used in the scale drop down selector in the print
1935	#. dialog the implicit meaning is "choose a suitable scale to fit
1936	#. the plot on a single page", but we need something shorter
1937	#: ../src/printwx.cc:395
1938	#: ../src/printwx.cc:805
1939	#: n:258
1940	msgid "One page"
1941	msgstr "Satu halaman"
1942
1943	#: ../src/mainfrm.cc:124
1944	#: ../src/printwx.cc:426
1945	#: n:259
1946	msgid "Bearing"
1947	msgstr ""
1948
1949	#: ../src/printwx.cc:465
1950	#: n:260
1951	msgid "Station Names"
1952	msgstr ""
1953
1954	#: ../src/printwx.cc:461
1955	#: n:261
1956	msgid "Crosses"
1957	msgstr ""
1958
1959	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1960	#. "survey stations".
1961	#: ../src/printwx.cc:451
1962	#: n:262
1963	msgid "Underground Survey Legs"
1964	msgstr ""
1965
1966	#: ../src/printwx.cc:481
1967	#: n:393
1968	msgid "Cross-sections"
1969	msgstr "Potongan melintang"
1970
1971	#: ../src/printwx.cc:486
1972	#: n:394
1973	msgid "Walls"
1974	msgstr ""
1975
1976	#: ../src/printwx.cc:490
1977	#: n:395
1978	msgid "Passages"
1979	msgstr ""
1980
1981	#: ../src/printwx.cc:494
1982	#: n:421
1983	msgid "Origin in centre"
1984	msgstr ""
1985
1986	#: ../src/printwx.cc:498
1987	#: n:422
1988	msgid "Full coordinates"
1989	msgstr ""
1990
1991	#. TRANSLATORS: Used in the print dialog:
1992	#: ../src/printwx.cc:432
1993	#: n:263
1994	msgid "Tilt angle"
1995	msgstr ""
1996
1997	#. TRANSLATORS: used in the print dialog - controls drawing lines
1998	#. around each page
1999	#: ../src/printwx.cc:506
2000	#: n:264
2001	#, fuzzy
2002	msgid "Page Borders"
2003	msgstr "Batas"
2004
2005	#. TRANSLATORS: As in the legend on a map. Used in the print dialog -
2006	#. controls drawing the box at the lower left with survey name, view
2007	#. angles, etc
2008	#: ../src/printwx.cc:517
2009	#: n:265
2010	msgid "Legend"
2011	msgstr ""
2012
2013	#. TRANSLATORS: will be used in the print dialog - check this to print
2014	#. blank pages (otherwise they’ll be skipped to save paper)
2015	#: ../src/printwx.cc:512
2016	#: n:266
2017	msgid "Blank Pages"
2018	msgstr ""
2019
2020	#. TRANSLATORS: Items in the "View" menu:
2021	#: ../src/mainfrm.cc:844
2022	#: n:270
2023	msgid "Station &Names\tCtrl+N"
2024	msgstr ""
2025
2026	#. TRANSLATORS: Toggles drawing of 3D passages
2027	#: ../src/mainfrm.cc:846
2028	#: n:346
2029	msgid "Passage &Tubes\tCtrl+T"
2030	msgstr ""
2031
2032	#: ../src/mainfrm.cc:847
2033	#: n:271
2034	msgid "&Crosses\tCtrl+X"
2035	msgstr ""
2036
2037	#: ../src/mainfrm.cc:848
2038	#: n:297
2039	msgid "&Grid\tCtrl+G"
2040	msgstr ""
2041
2042	#: ../src/mainfrm.cc:849
2043	#: n:318
2044	msgid "&Bounding Box\tCtrl+B"
2045	msgstr ""
2046
2047	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2048	#. "survey stations".
2049	#: ../src/mainfrm.cc:853
2050	#: n:272
2051	msgid "&Underground Survey Legs\tCtrl+L"
2052	msgstr ""
2053
2054	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2055	#. "survey stations".
2056	#: ../src/mainfrm.cc:856
2057	#: n:291
2058	msgid "&Surface Survey Legs\tCtrl+F"
2059	msgstr ""
2060
2061	#: ../src/mainfrm.cc:865
2062	#: n:273
2063	msgid "&Overlapping Names"
2064	msgstr ""
2065
2066	#: ../src/gfxcore.cc:3272
2067	#: ../src/mainfrm.cc:866
2068	#: n:292
2069	msgid "Colour by &Depth"
2070	msgstr ""
2071
2072	#: ../src/gfxcore.cc:3273
2073	#: ../src/mainfrm.cc:867
2074	#: n:293
2075	msgid "Colour by D&ate"
2076	msgstr ""
2077
2078	#: ../src/gfxcore.cc:3274
2079	#: ../src/mainfrm.cc:868
2080	#: n:289
2081	msgid "Colour by E&rror"
2082	msgstr ""
2083
2084	#: ../src/mainfrm.cc:870
2085	#: n:294
2086	msgid "Highlight &Entrances"
2087	msgstr ""
2088
2089	#: ../src/mainfrm.cc:871
2090	#: n:295
2091	msgid "Highlight &Fixed Points"
2092	msgstr ""
2093
2094	#: ../src/mainfrm.cc:872
2095	#: n:296
2096	msgid "Highlight E&xported Points"
2097	msgstr ""
2098
2099	#: ../src/printwx.cc:469
2100	#: n:418
2101	msgid "Entrances"
2102	msgstr ""
2103
2104	#: ../src/printwx.cc:473
2105	#: n:419
2106	msgid "Fixed Points"
2107	msgstr ""
2108
2109	#: ../src/printwx.cc:477
2110	#: n:420
2111	msgid "Exported Stations"
2112	msgstr ""
2113
2114	#: ../src/mainfrm.cc:877
2115	#: n:237
2116	msgid "&Perspective"
2117	msgstr ""
2118
2119	#: ../src/mainfrm.cc:879
2120	#: n:238
2121	msgid "Textured &Walls"
2122	msgstr ""
2123
2124	#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2125	#. using that term instead if it gives a better translation which most
2126	#. users will understand.
2127	#: ../src/mainfrm.cc:883
2128	#: n:239
2129	msgid "Fade Distant Ob&jects"
2130	msgstr ""
2131
2132	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2133	#. "survey stations".
2134	#: ../src/mainfrm.cc:886
2135	#: n:298
2136	msgid "Smoot&hed Survey Legs"
2137	msgstr ""
2138
2139	#: ../src/mainfrm.cc:892
2140	#: ../src/mainfrm.cc:896
2141	#: n:356
2142	msgid "Full Screen &Mode\tF11"
2143	msgstr ""
2144
2145	#: ../src/mainfrm.cc:910
2146	#: n:274
2147	msgid "&Compass"
2148	msgstr ""
2149
2150	#: ../src/mainfrm.cc:911
2151	#: n:275
2152	msgid "C&linometer"
2153	msgstr ""
2154
2155	#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2156	#. corresponds to which depth, date, survey closure error, etc.
2157	#: ../src/mainfrm.cc:914
2158	#: n:276
2159	msgid "Colour &Key"
2160	msgstr ""
2161
2162	#: ../src/mainfrm.cc:915
2163	#: n:277
2164	msgid "&Scale Bar"
2165	msgstr ""
2166
2167	#: ../src/mainfrm.cc:905
2168	#: n:280
2169	msgid "&Reverse Sense\tCtrl+R"
2170	msgstr ""
2171
2172	#: ../src/mainfrm.cc:875
2173	#: ../src/mainfrm.cc:907
2174	#: n:281
2175	msgid "&Cancel Measuring Line\tEscape"
2176	msgstr ""
2177
2178	#: ../src/mainfrm.cc:916
2179	#: n:299
2180	msgid "&Indicators"
2181	msgstr ""
2182
2183	#: ../src/z_getopt.c:697
2184	#: ../src/z_getopt.c:709
2185	#: n:300
2186	#, c-format
2187	msgid "%s: option “%s” is ambiguous\n"
2188	msgstr "%s: pilihan “%s” ambigu\n"
2189
2190	#: ../src/z_getopt.c:1025
2191	#: ../src/z_getopt.c:1036
2192	#: n:301
2193	#, c-format
2194	msgid "%s: option “-W %s” is ambiguous\n"
2195	msgstr "%s: pilihan “-W %s” ambigu\n"
2196
2197	#: ../src/z_getopt.c:753
2198	#: ../src/z_getopt.c:757
2199	#: n:302
2200	#, c-format
2201	msgid "%s: option “%c%s” doesn’t allow an argument\n"
2202	msgstr "%s: pilihan “%c%s” tidak mengizinkan argumen\n"
2203
2204	#: ../src/z_getopt.c:742
2205	#: ../src/z_getopt.c:745
2206	#: n:303
2207	#, c-format
2208	msgid "%s: option “--%s” doesn’t allow an argument\n"
2209	msgstr "%s: pilihan “--%s” tidak mengizinkan argumen\n"
2210
2211	#: ../src/z_getopt.c:1060
2212	#: ../src/z_getopt.c:1071
2213	#: n:304
2214	#, c-format
2215	msgid "%s: option “-W %s” doesn’t allow an argument\n"
2216	msgstr "%s: pilihan “-W %s” tidak mengizinkan argumen\n"
2217
2218	#: ../src/z_getopt.c:792
2219	#: ../src/z_getopt.c:804
2220	#: ../src/z_getopt.c:1091
2221	#: ../src/z_getopt.c:1103
2222	#: n:305
2223	#, c-format
2224	msgid "%s: option “%s” requires an argument\n"
2225	msgstr "%s: opsi “%s” membutuhkan sebuah argumen\n"
2226
2227	#: ../src/z_getopt.c:962
2228	#: ../src/z_getopt.c:973
2229	#: ../src/z_getopt.c:1156
2230	#: ../src/z_getopt.c:1168
2231	#: n:306
2232	#, c-format
2233	msgid "%s: option requires an argument -- %c\n"
2234	msgstr "%s: opsi membutuhkan argumen -- %c\n"
2235
2236	#: ../src/z_getopt.c:842
2237	#: ../src/z_getopt.c:845
2238	#: n:307
2239	#, c-format
2240	msgid "%s: unrecognized option “--%s”\n"
2241	msgstr "%s: opsi tidak di-kenal “--%s”\n"
2242
2243	#: ../src/z_getopt.c:853
2244	#: ../src/z_getopt.c:856
2245	#: n:308
2246	#, c-format
2247	msgid "%s: unrecognized option “%c%s”\n"
2248	msgstr "%s: opsi tidak di-kenal “%c%s”\n"
2249
2250	#: ../src/z_getopt.c:903
2251	#: ../src/z_getopt.c:906
2252	#: n:309
2253	#, c-format
2254	msgid "%s: illegal option -- %c\n"
2255	msgstr "%s: opsi ilegal -- %c\n"
2256
2257	#: ../src/z_getopt.c:912
2258	#: ../src/z_getopt.c:915
2259	#: n:310
2260	#, c-format
2261	msgid "%s: invalid option -- %c\n"
2262	msgstr "%s: opsi tidak-valid -- %c\n"
2263
2264	#: ../src/mainfrm.cc:830
2265	#: n:311
2266	msgid "&New Presentation"
2267	msgstr ""
2268
2269	#: ../src/mainfrm.cc:831
2270	#: n:312
2271	msgid "&Open Presentation…"
2272	msgstr ""
2273
2274	#: ../src/mainfrm.cc:832
2275	#: n:313
2276	msgid "&Save Presentation"
2277	msgstr ""
2278
2279	#: ../src/mainfrm.cc:833
2280	#: n:314
2281	msgid "Sa&ve Presentation As…"
2282	msgstr ""
2283
2284	#. TRANSLATORS: "Mark" as in "Mark this position"
2285	#: ../src/mainfrm.cc:836
2286	#: n:315
2287	msgid "&Mark"
2288	msgstr ""
2289
2290	#. TRANSLATORS: "Play" as in "Play back a recording"
2291	#: ../src/mainfrm.cc:838
2292	#: n:316
2293	msgid "Pla&y"
2294	msgstr ""
2295
2296	#: ../src/mainfrm.cc:839
2297	#: n:317
2298	msgid "&Export as Movie…"
2299	msgstr ""
2300
2301	#: ../src/mainfrm.cc:2393
2302	#: n:331
2303	msgid "Export Movie"
2304	msgstr ""
2305
2306	#: ../src/mainfrm.cc:332
2307	#: n:319
2308	msgid "Select an output filename"
2309	msgstr ""
2310
2311	#: ../src/mainfrm.cc:329
2312	#: ../src/mainfrm.cc:2315
2313	#: n:320
2314	msgid "Aven presentations"
2315	msgstr ""
2316
2317	#. TRANSLATORS: title of the save screenshot dialog
2318	#: ../src/mainfrm.cc:1906
2319	#: n:321
2320	msgid "Save Screenshot"
2321	msgstr "Simpan tangkapan layar"
2322
2323	#: ../src/mainfrm.cc:2310
2324	#: ../src/mainfrm.cc:2313
2325	#: n:322
2326	msgid "Select a presentation to open"
2327	msgstr ""
2328
2329	#: ../src/mainfrm.cc:411
2330	#: n:323
2331	#, c-format
2332	msgid "Error in format of presentation file “%s”"
2333	msgstr ""
2334
2335	#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2336	#. surveying package, so probably shouldn’t be translated
2337	#: ../src/mainfrm.cc:1876
2338	#: n:324
2339	msgid "Compass PLT files"
2340	msgstr ""
2341
2342	#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2343	#. package, so don’t translate it.
2344	#: ../src/mainfrm.cc:1883
2345	#: n:325
2346	msgid "CMAP XYZ files"
2347	msgstr ""
2348
2349	#. TRANSLATORS: title of message box
2350	#: ../src/mainfrm.cc:1969
2351	#: ../src/mainfrm.cc:2287
2352	#: ../src/mainfrm.cc:2304
2353	#: n:326
2354	msgid "Modified Presentation"
2355	msgstr ""
2356
2357	#. TRANSLATORS: and the question in that box
2358	#: ../src/mainfrm.cc:1967
2359	#: ../src/mainfrm.cc:2286
2360	#: ../src/mainfrm.cc:2303
2361	#: n:327
2362	msgid "The current presentation has been modified. Abandon unsaved changes?"
2363	msgstr ""
2364
2365	#: ../src/mainfrm.cc:2604
2366	#: ../src/mainfrm.cc:2615
2367	#: n:328
2368	msgid "No matches were found."
2369	msgstr ""
2370
2371	#~ msgid "Open &Terrain…"
2372	#~ msgstr ""
2373
2374	#~ msgid "Solid Su&rface"
2375	#~ msgstr ""
2376
2377	#. TRANSLATORS: number of stations found matching search
2378	#, c-format
2379	#~ msgid "%d found"
2380	#~ msgstr "%d ditemukan"
2381
2382	#. TRANSLATORS: "Find stations" button tooltip
2383	#: ../src/mainfrm.cc:993
2384	#: n:332
2385	msgid "Find"
2386	msgstr "Cari"
2387
2388	#. TRANSLATORS: "Hide stations" button default tooltip
2389	#: ../src/mainfrm.cc:995
2390	#: ../src/mainfrm.cc:2647
2391	#: n:333
2392	msgid "Hide"
2393	msgstr "Tersembunyi"
2394
2395	#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2396	#: ../src/mainfrm.cc:2608
2397	#: n:334
2398	#, c-format
2399	msgid "Hide %d found stations"
2400	msgstr ""
2401
2402	#: ../src/mainfrm.cc:212
2403	#: ../src/mainfrm.cc:2052
2404	#: ../src/mainfrm.cc:2133
2405	#: ../src/mainfrm.cc:2185
2406	#: n:335
2407	msgid "Altitude"
2408	msgstr ""
2409
2410	#. TRANSLATORS: error if you try to drag multiple files to the aven
2411	#. window
2412	#: ../src/mainfrm.cc:689
2413	#: n:336
2414	msgid "You may only view one 3d file at a time."
2415	msgstr ""
2416
2417	#: ../src/mainfrm.cc:917
2418	#: n:337
2419	msgid "&Side Panel"
2420	msgstr ""
2421
2422	#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2423	#. Easting)
2424	#: ../src/mainfrm.cc:2050
2425	#: ../src/mainfrm.cc:2072
2426	#: ../src/mainfrm.cc:2074
2427	#: ../src/mainfrm.cc:2184
2428	#: n:338
2429	msgid "%.2f E, %.2f N"
2430	msgstr ""
2431
2432	#. TRANSLATORS: Used in Aven:
2433	#. From <stationname>
2434	#. H: 123.45m V: 234.56m
2435	#. Dist: 456.78m Brg: 200
2436	#: ../src/mainfrm.cc:2092
2437	#: ../src/mainfrm.cc:2142
2438	#: ../src/mainfrm.cc:2204
2439	#: n:339
2440	#, c-format
2441	msgid "From %s"
2442	msgstr ""
2443
2444	#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2445	#: ../src/mainfrm.cc:2217
2446	#: n:340
2447	#, c-format
2448	msgid "H %.2f%s, V %.2f%s"
2449	msgstr ""
2450
2451	#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2452	#. in Compass bearing)
2453	#: ../src/mainfrm.cc:2229
2454	#: n:341
2455	#, c-format
2456	msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2457	msgstr ""
2458
2459	#. TRANSLATORS: tickable menu item in View menu.
2460	#: ../src/gfxcore.cc:3263
2461	#: ../src/gfxcore.cc:3281
2462	#: ../src/mainfrm.cc:919
2463	#: n:342
2464	msgid "&Metric"
2465	msgstr ""
2466
2467	#. TRANSLATORS: tickable menu item in View menu.
2468	#.
2469	#. Degrees are the angular measurement where there are 360 in a full
2470	#. circle.
2471	#: ../src/gfxcore.cc:3228
2472	#: ../src/gfxcore.cc:3246
2473	#: ../src/mainfrm.cc:920
2474	#: n:343
2475	msgid "&Degrees"
2476	msgstr ""
2477
2478	#. TRANSLATORS: tickable menu item in View menu.
2479	#.
2480	#. Show the tilt of the survey as a percentage gradient (100% = 45
2481	#. degrees = 50 grad).
2482	#: ../src/gfxcore.cc:3251
2483	#: ../src/mainfrm.cc:921
2484	#: n:430
2485	msgid "&Percent"
2486	msgstr "&Persen"
2487
2488	#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2489	#. used e.g. "5km".
2490	#.
2491	#. If there should be a space between the number and this, include
2492	#. one in the translation.
2493	#: ../src/gfxcore.cc:1144
2494	#: ../src/printwx.cc:1095
2495	#: n:423
2496	msgid "km"
2497	msgstr ""
2498
2499	#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2500	#. e.g. "10m".
2501	#.
2502	#. If there should be a space between the number and this, include
2503	#. one in the translation.
2504	#: ../src/gfxcore.cc:1018
2505	#: ../src/gfxcore.cc:1151
2506	#: ../src/mainfrm.cc:2041
2507	#: ../src/mainfrm.cc:2108
2508	#: ../src/mainfrm.cc:2128
2509	#: ../src/mainfrm.cc:2177
2510	#: ../src/mainfrm.cc:2208
2511	#: ../src/printwx.cc:1097
2512	#: n:424
2513	msgid "m"
2514	msgstr ""
2515
2516	#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2517	#. used e.g. "50cm".
2518	#.
2519	#. If there should be a space between the number and this, include
2520	#. one in the translation.
2521	#: ../src/gfxcore.cc:1159
2522	#: ../src/printwx.cc:1100
2523	#: n:425
2524	msgid "cm"
2525	msgstr ""
2526
2527	#. TRANSLATORS: abbreviation for "miles" (unit of length,
2528	#. plural), used e.g. "2 miles".
2529	#.
2530	#. If there should be a space between the number and this,
2531	#. include one in the translation.
2532	#: ../src/gfxcore.cc:1172
2533	#: n:426
2534	msgid " miles"
2535	msgstr ""
2536
2537	#. TRANSLATORS: abbreviation for "mile" (unit of length,
2538	#. singular), used e.g. "1 mile".
2539	#.
2540	#. If there should be a space between the number and this,
2541	#. include one in the translation.
2542	#: ../src/gfxcore.cc:1179
2543	#: n:427
2544	msgid " mile"
2545	msgstr ""
2546
2547	#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2548	#. as "10ft".
2549	#.
2550	#. If there should be a space between the number and this, include
2551	#. one in the translation.
2552	#: ../src/gfxcore.cc:1018
2553	#: ../src/gfxcore.cc:1187
2554	#: ../src/mainfrm.cc:2046
2555	#: ../src/mainfrm.cc:2111
2556	#: ../src/mainfrm.cc:2131
2557	#: ../src/mainfrm.cc:2182
2558	#: ../src/mainfrm.cc:2213
2559	#: n:428
2560	msgid "ft"
2561	msgstr ""
2562
2563	#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2564	#. e.g. as "6in".
2565	#.
2566	#. If there should be a space between the number and this, include
2567	#. one in the translation.
2568	#: ../src/gfxcore.cc:1195
2569	#: n:429
2570	msgid "in"
2571	msgstr ""
2572
2573	#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2574	#: ../src/gfxcore.cc:3226
2575	#: n:387
2576	msgid "&Hide Compass"
2577	msgstr ""
2578
2579	#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2580	#: ../src/gfxcore.cc:3241
2581	#: n:384
2582	msgid "&Hide Clino"
2583	msgstr ""
2584
2585	#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2586	#: ../src/gfxcore.cc:3261
2587	#: n:385
2588	msgid "&Hide scale bar"
2589	msgstr ""
2590
2591	#. TRANSLATORS: Menu item which turns off the colour key.
2592	#. The "Colour Key" is the thing in aven showing which colour
2593	#. corresponds to which depth, date, survey closure error, etc.
2594	#: ../src/gfxcore.cc:3279
2595	#: n:386
2596	msgid "&Hide colour key"
2597	msgstr ""
2598
2599	#. TRANSLATORS: degree symbol - probably should be translated to
2600	#. itself.
2601	#: ../src/gfxcore.cc:693
2602	#: ../src/gfxcore.cc:768
2603	#: ../src/mainfrm.cc:2095
2604	#: ../src/mainfrm.cc:2221
2605	#: ../src/printwx.cc:986
2606	#: ../src/printwx.cc:1014
2607	#: ../src/printwx.cc:1018
2608	#: ../src/printwx.cc:1022
2609	#: ../src/printwx.cc:1032
2610	#: n:344
2611	msgid "°"
2612	msgstr "°"
2613
2614	#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2615	#. circle).
2616	#: ../src/gfxcore.cc:698
2617	#: ../src/gfxcore.cc:773
2618	#: n:76
2619	msgid "ᵍ"
2620	msgstr ""
2621
2622	#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2623	#. full circle). Try to make this as short as sensibly possible.
2624	#.
2625	#. E.g. in Italian and Spanish we use "g.cent." rather than
2626	#. "gradi quattrocentesimali"/"grados centesimales"
2627	#: ../src/mainfrm.cc:2103
2628	#: ../src/mainfrm.cc:2224
2629	#: n:345
2630	msgid "grad"
2631	msgstr ""
2632
2633	#. TRANSLATORS: symbol for percentage gradient (100% = 45
2634	#. degrees = 50 grad).
2635	#: ../src/gfxcore.cc:759
2636	#: ../src/gfxcore.cc:777
2637	#: n:96
2638	msgid "%"
2639	msgstr ""
2640
2641	#. TRANSLATORS: used for the percentage gradient on
2642	#. vertical angles.
2643	#: ../src/gfxcore.cc:753
2644	#: n:431
2645	msgid "∞"
2646	msgstr ""
2647
2648	#: ../src/mainfrm.cc:900
2649	#: n:347
2650	#~ msgid "&Preferences…"
2651	#~ msgstr "&Preferensi…"
2652
2653	#: n:348
2654	#~ msgid "Draw passage walls"
2655	#~ msgstr ""
2656
2657	#: n:349
2658	#~ msgid "Estimate LRUD readings based on heuristics"
2659	#~ msgstr ""
2660
2661	#: n:350
2662	#~ msgid "Mark survey stations with crosses"
2663	#~ msgstr ""
2664
2665	#: n:351
2666	#~ msgid "Highlight stations marked as entrances"
2667	#~ msgstr ""
2668
2669	#: n:352
2670	#~ msgid "Highlight stations marked as fixed points"
2671	#~ msgstr ""
2672
2673	#: n:353
2674	#~ msgid "Highlight stations which are exported"
2675	#~ msgstr ""
2676
2677	#: n:354
2678	#~ msgid "Mark survey stations with their names"
2679	#~ msgstr ""
2680
2681	#: n:355
2682	#~ msgid "Allow names to overlap on the display (faster)"
2683	#~ msgstr ""
2684
2685	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2686	#. "survey stations".
2687	#: n:357
2688	#~ msgid "Display underground survey legs"
2689	#~ msgstr ""
2690
2691	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2692	#. "survey stations".
2693	#: n:358
2694	#~ msgid "Display surface survey legs"
2695	#~ msgstr ""
2696
2697	#: n:359
2698	#~ msgid "Colour surface surveys by depth"
2699	#~ msgstr ""
2700
2701	#: n:360
2702	#~ msgid "Draw surface legs with dashed lines"
2703	#~ msgstr ""
2704
2705	#: n:361
2706	#~ msgid "Draw a grid"
2707	#~ msgstr ""
2708
2709	#: n:362
2710	#~ msgid "metric units"
2711	#~ msgstr ""
2712
2713	#. TRANSLATORS: Miles, Feet, Inches, etc. What they call "English units" in
2714	#. the USA (rather confusingly now that England has largely gone metric!)
2715	#: n:363
2716	#~ msgid "imperial units"
2717	#~ msgstr ""
2718
2719	#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
2720	#. full circle.
2721	#: n:364
2722	#~ msgid "degrees (°)"
2723	#~ msgstr ""
2724
2725	#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
2726	#. full circle.
2727	#: n:365
2728	#~ msgid "grads"
2729	#~ msgstr ""
2730
2731	#: n:366
2732	#~ msgid "Display measurements in"
2733	#~ msgstr ""
2734
2735	#: n:367
2736	#~ msgid "Display angles in"
2737	#~ msgstr ""
2738
2739	#. TRANSLATORS: reverses the sense of the mouse controls
2740	#: n:368
2741	#~ msgid "Reverse the sense of the controls"
2742	#~ msgstr ""
2743
2744	#: n:369
2745	#~ msgid "Display scale bar"
2746	#~ msgstr ""
2747
2748	#: n:370
2749	#~ msgid "Display depth bar"
2750	#~ msgstr ""
2751
2752	#: n:371
2753	#~ msgid "Display compass"
2754	#~ msgstr ""
2755
2756	#: n:372
2757	#~ msgid "Display clinometer"
2758	#~ msgstr ""
2759
2760	#: n:373
2761	#~ msgid "Display side panel"
2762	#~ msgstr ""
2763
2764	#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2765	#. in Compass bearing)
2766	#: ../src/mainfrm.cc:2115
2767	#: n:374
2768	#, c-format
2769	msgid "%s: H %.2f%s, Brg %03d%s"
2770	msgstr ""
2771
2772	#. TRANSLATORS: "V" is short for "Vertical"
2773	#: ../src/mainfrm.cc:2148
2774	#: n:375
2775	#, c-format
2776	msgid "%s: V %.2f%s"
2777	msgstr ""
2778
2779	#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2780	#. tree hierarchy of survey station names
2781	#: ../src/mainfrm.cc:1047
2782	#: n:376
2783	msgid "Surveys"
2784	msgstr ""
2785
2786	#: ../src/mainfrm.cc:1048
2787	#: n:377
2788	msgid "Presentation"
2789	msgstr ""
2790
2791	#: ../src/mainfrm.cc:210
2792	#: n:378
2793	msgid "Easting"
2794	msgstr ""
2795
2796	#: ../src/mainfrm.cc:211
2797	#: n:379
2798	msgid "Northing"
2799	msgstr ""
2800
2801	#: ../src/mainfrm.cc:765
2802	#: n:380
2803	msgid "&Print…\tCtrl+P"
2804	msgstr "&Cetak…\tCtrl+P"
2805
2806	#: ../src/mainfrm.cc:766
2807	#: n:381
2808	msgid "P&age Setup…"
2809	msgstr "&Tata Halaman…"
2810
2811	#: ../src/mainfrm.cc:770
2812	#: n:382
2813	msgid "&Export as…"
2814	msgstr ""
2815
2816	#. TRANSLATORS: Title of file dialog to choose name and type of exported
2817	#. file.
2818	#: ../src/printwx.cc:622
2819	#: n:401
2820	msgid "Export as:"
2821	msgstr ""
2822
2823	#. TRANSLATORS: Title of the export
2824	#. dialog
2825	#: ../src/printwx.cc:299
2826	#: n:383
2827	msgid "Export"
2828	msgstr "Ekspor"
2829
2830	#. TRANSLATORS: for about box:
2831	#: ../src/aboutdlg.cc:142
2832	#: n:390
2833	msgid "System Information:"
2834	msgstr ""
2835
2836	#. TRANSLATORS: Title of the print preview dialog
2837	#: ../src/printwx.cc:659
2838	#: n:398
2839	msgid "Print Preview"
2840	msgstr "Pratilik Cetak"
2841
2842	#. TRANSLATORS: Title of the print
2843	#. dialog
2844	#: ../src/printwx.cc:296
2845	#: n:399
2846	msgid "Print"
2847	msgstr "Cetak"
2848
2849	#: ../src/printwx.cc:570
2850	#: n:400
2851	msgid "&Print…"
2852	msgstr "&Cetak…"
2853
2854	#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2855	#. "survey stations".
2856	#: ../src/printwx.cc:457
2857	#: n:403
2858	msgid "Sur&face Survey Legs"
2859	msgstr ""
2860
2861	#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2862	#: ../src/mainfrm.cc:97
2863	#: n:404
2864	msgid "Edit Waypoint"
2865	msgstr ""
2866
2867	#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2868	#. in a presentation.
2869	#: ../src/mainfrm.cc:136
2870	#: n:278
2871	msgid " (unused in perspective view)"
2872	msgstr ""
2873
2874	#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2875	#. presentation.
2876	#: ../src/mainfrm.cc:143
2877	#: n:279
2878	msgid "Time: "
2879	msgstr "Waktu: "
2880
2881	#. TRANSLATORS: units+info after time field in dialog to edit a
2882	#. waypoint in a presentation.
2883	#: ../src/mainfrm.cc:147
2884	#: n:282
2885	msgid " secs (0 = auto; *6 = 6 times auto)"
2886	msgstr ""
2887
2888	#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2889	#. perhaps by "Survex" or other things in future).
2890	#: ../src/aven.cc:230
2891	#: n:405
2892	#, c-format
2893	msgid "This version of %s requires OpenGL to work, but it isn’t available."
2894	msgstr ""
2895
2896	#. TRANSLATORS: for diffpos:
2897	#: ../src/diffpos.c:159
2898	#: n:500
2899	#, c-format
2900	msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2901	msgstr ""
2902
2903	#. TRANSLATORS: for diffpos:
2904	#: ../src/diffpos.c:196
2905	#: n:501
2906	#, c-format
2907	msgid "Added: %s"
2908	msgstr ""
2909
2910	#. TRANSLATORS: for diffpos:
2911	#: ../src/diffpos.c:219
2912	#: n:502
2913	#, c-format
2914	msgid "Deleted: %s"
2915	msgstr ""
2916
2917	#. TRANSLATORS: for extend: the user specified breaking a loop or
2918	#. changing extend direction at this station, but we didn’t find it in
2919	#. the 3d file
2920	#: ../src/extend.c:262
2921	#: ../src/extend.c:280
2922	#: ../src/extend.c:325
2923	#: ../src/extend.c:367
2924	#: ../src/extend.c:409
2925	#: n:510
2926	#, c-format
2927	msgid "Failed to find station %s"
2928	msgstr ""
2929
2930	#. TRANSLATORS: for extend: the user specified breaking a loop or
2931	#. changing extend direction at this leg, but we didn’t find it in the
2932	#. 3d file
2933	#: ../src/extend.c:306
2934	#: ../src/extend.c:348
2935	#: ../src/extend.c:390
2936	#: ../src/extend.c:432
2937	#: n:511
2938	#, c-format
2939	msgid "Failed to find leg %s → %s"
2940	msgstr ""
2941
2942	#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
2943	#: ../src/extend.c:253
2944	#: n:512
2945	#, c-format
2946	msgid "Starting from station %s"
2947	msgstr ""
2948
2949	#. TRANSLATORS: for extend:
2950	#: ../src/extend.c:273
2951	#: n:513
2952	#, c-format
2953	msgid "Extending to the left from station %s"
2954	msgstr ""
2955
2956	#. TRANSLATORS: for extend:
2957	#: ../src/extend.c:318
2958	#: n:514
2959	#, c-format
2960	msgid "Extending to the right from station %s"
2961	msgstr ""
2962
2963	#. TRANSLATORS: for extend:
2964	#: ../src/extend.c:293
2965	#: n:515
2966	#, c-format
2967	msgid "Extending to the left from leg %s → %s"
2968	msgstr ""
2969
2970	#. TRANSLATORS: for extend:
2971	#: ../src/extend.c:338
2972	#: n:516
2973	#, c-format
2974	msgid "Extending to the right from leg %s → %s"
2975	msgstr ""
2976
2977	#. TRANSLATORS: for extend:
2978	#: ../src/extend.c:402
2979	#: n:517
2980	#, c-format
2981	msgid "Breaking survey loop at station %s"
2982	msgstr ""
2983
2984	#. TRANSLATORS: for extend:
2985	#: ../src/extend.c:422
2986	#: n:518
2987	#, c-format
2988	msgid "Breaking survey loop at leg %s → %s"
2989	msgstr ""
2990
2991	#. TRANSLATORS: for extend:
2992	#: ../src/extend.c:360
2993	#: n:519
2994	#, c-format
2995	msgid "Swapping extend direction from station %s"
2996	msgstr ""
2997
2998	#. TRANSLATORS: for extend:
2999	#: ../src/extend.c:380
3000	#: n:520
3001	#, c-format
3002	msgid "Swapping extend direction from leg %s → %s"
3003	msgstr ""
3004
3005	#. TRANSLATORS: for extend:
3006	#: ../src/extend.c:550
3007	#: n:521
3008	#, c-format
3009	msgid "Applying specfile: “%s”"
3010	msgstr ""
3011
3012	#. TRANSLATORS: for extend:
3013	#. Used to tell the user that a file is being written - %s is the filename
3014	#: ../src/extend.c:613
3015	#: n:522
3016	#, c-format
3017	msgid "Writing %s…"
3018	msgstr ""
3019
3020	#: ../src/findentrances.cc:100
3021	#: ../src/gpx.cc:70
3022	#: ../src/kml.cc:69
3023	#: n:287
3024	#, c-format
3025	msgid "Failed to initialise input coordinate system “%s”"
3026	msgstr ""
3027
3028	#: ../src/findentrances.cc:103
3029	#: ../src/gpx.cc:75
3030	#: ../src/kml.cc:74
3031	#: n:288
3032	#, c-format
3033	msgid "Failed to initialise output coordinate system “%s”"
3034	msgstr ""
3035
3036	#: ../src/findentrances.cc:158
3037	#: n:388
3038	msgid "-d PROJ_DATUM 3D_FILE"
3039	msgstr ""
3040
3041	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
3042	#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
3043	#. what the input datum is.
3044	#: ../src/findentrances.cc:149
3045	#: n:389
3046	msgid "input datum as string to pass to PROJ"
3047	msgstr ""
3048
3049	#. TRANSLATORS: The PROJ library is used to do coordinate transformations
3050	#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
3051	#. of the coordinate projection in use, the user must specify it here for
3052	#. export formats which need to know it (e.g. GPX).
3053	#: ../src/printwx.cc:531
3054	#: n:440
3055	msgid "Coordinate projection"
3056	msgstr ""
3057
3058	#: ../src/readval.c:336
3059	#: n:392
3060	msgid "Separator in survey name"
3061	msgstr ""
3062
3063	#. TRANSLATORS: Used in place of the station name when talking about an
3064	#. anonymous station.
3065	#: ../src/labelinfo.h:81
3066	#: n:56
3067	msgid "anonymous station"
3068	msgstr ""
3069
3070	#: ../src/readval.c:124
3071	#: ../src/readval.c:139
3072	#: ../src/readval.c:156
3073	#: n:3
3074	msgid "Can't have a leg between two anonymous stations"
3075	msgstr ""
3076
3077	#: ../src/dump3d.c:52
3078	#: n:396
3079	msgid "show survey date information (if present)"
3080	msgstr ""
3081
3082	#: ../src/mainfrm.cc:862
3083	#: n:406
3084	msgid "Spla&y Legs"
3085	msgstr ""
3086
3087	#: ../src/mainfrm.cc:859
3088	#: n:407
3089	msgid "&Hide"
3090	msgstr "&Tersembunyi"
3091
3092	#: ../src/mainfrm.cc:860
3093	#: n:408
3094	msgid "&Fade"
3095	msgstr ""
3096
3097	#: ../src/mainfrm.cc:861
3098	#: n:409
3099	msgid "&Show"
3100	msgstr ""
3101
3102	#: ../src/printwx.cc:364
3103	#: n:410
3104	msgid "Export format"
3105	msgstr ""

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format