source: git/lib/de.po @ 0fceb30

msgid ""
msgstr ""
"Project-Id-Version: survex\n"
"Report-Msgid-Bugs-To: olly@survex.com\n"
"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
"PO-Revision-Date: 2014-01-16 03:14:41 +0000\n"
"Last-Translator: Dennis Baudys <Unknown>\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: de\n"

#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
#. was trying to allocate space for.
#: ../src/message.c:85
#: n:1
#, c-format
msgid "Out of memory (couldn’t find %lu bytes)."
msgstr "Zu wenig Speicherplatz (%lu Bytes nicht gefunden)."

#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
#. greater" if that gives a more natural translation.  It's
#. technically not quite right when there are parallel active release
#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
#. seems unlikely to confuse users.
#: ../src/commands.c:1666
#: n:2
#, c-format
msgid "Survex version %s or greater required to process this survey data."
msgstr "Zum Verarbeiten dieser Vermessungsdaten ist Survex-Version %s oder neuer erforderlich."

#. TRANSLATORS: Indicates a warning message e.g.:
#. "spoon.svx:12: warning: *prefix is deprecated"
#: ../src/aven.cc:374
#: ../src/message.c:1245
#: n:4
msgid "warning"
msgstr "Warnung"

#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
#. by the line number in that file.
#: ../src/datain.c:107
#: n:5
#, c-format
msgid "In file included from %s:%u:\n"
msgstr "In von %s:%u aus eingelesener Datei:\n"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:561
#: n:6
msgid "*prefix is deprecated - use *begin and *end instead"
msgstr "*prefix ist veraltet - stattdessen *begin und *end verwenden"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/readval.c:206
#: n:7
#, c-format
msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
msgstr "Ungültiges Zeichen »%c« in Messpunktname (erlaubte Zeichen können mit *SET NAMES definiert werden)"

#: ../src/readval.c:385
#: n:8
msgid "Field may not be omitted"
msgstr "Eintragung fehlt"

#: ../src/datain.c:1492
#: ../src/datain.c:1772
#: ../src/readval.c:387
#: ../src/readval.c:428
#: ../src/readval.c:458
#: n:9
#, c-format
msgid "Expecting numeric field, found “%s”"
msgstr "Zahl erwartet, »%s« gelesen"

#: ../src/commands.c:1567
#: n:10
#, c-format
msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
msgstr "»PRESERVE«, »TOUPPER« oder »TOLOWER« erwartet, »%s« gelesen"

#: ../src/debug.h:45
#: ../src/debug.h:47
#: ../src/matrix.c:352
#: ../src/message.c:238
#: n:11
msgid "Bug in program detected! Please report this to the authors"
msgstr "Fehler im Programm, bitte informieren Sie die Programmierer darüber"

#: ../src/commands.c:1780
#: ../src/extend.c:435
#: n:12
#, c-format
msgid "Unknown command “%s”"
msgstr "Unbekanntes Befehl »%s«"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/netbits.c:407
#: n:13
#, c-format
msgid "Station “%s” equated to itself"
msgstr "Messpunkt »%s« mit sich selbst gleichgesetzt"

#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
#. survey stations.
#: ../src/datain.c:1013
#: n:14
msgid "Compass reading may not be omitted except on plumbed legs"
msgstr "Kompassablesung darf nur bei Lotstrecken weggelassen werden"

#: ../src/datain.c:246
#: ../src/extend.c:440
#: n:15
msgid "End of line not blank"
msgstr "Ende der Zeile ist nicht leer"

#: ../src/cavern.c:392
#: n:16
#, c-format
msgid "There were %d warning(s)."
msgstr "Es gab %d Warnungen."

#. TRANSLATORS: %s is replaced by the command we attempted to run.
#: ../src/cavernlog.cc:175
#: ../src/cavernlog.cc:233
#: n:17
#, c-format
msgid "Couldn’t run external command: “%s”"
msgstr "Externer Befehl konnte nicht ausgeführt werden: »%s«"

#: ../src/datain.c:80
#: ../src/datain.c:88
#: ../src/datain.c:95
#: ../src/datain.c:732
#: ../src/extend.c:558
#: ../src/sorterr.c:80
#: ../src/sorterr.c:97
#: ../src/sorterr.c:240
#: n:18
msgid "Error reading file"
msgstr "Fehler beim Einlesen der Datei"

#: ../src/message.c:1260
#: n:19
msgid "Too many errors - giving up"
msgstr "Abbruch wegen zu vieler Fehler"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:1446
#: n:20
msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
msgstr "*DEFAULT ist veraltet - stattdessen *CALIBRATE/DATA/SD/UNITS mit DEFAULT-Argument verwenden"

#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
#. (a weight on a string).  So the problem here is that the leg is
#. vertical, so a compass reading has no meaning!
#: ../src/datain.c:984
#: n:21
msgid "Compass reading given on plumbed leg"
msgstr "Kompassablesung für geloteten Schacht angegeben"

#: ../src/commands.c:645
#: n:22
msgid "END with no matching BEGIN in this file"
msgstr "END ohne entsprechendes BEGIN in dieser Datei"

#: ../src/datain.c:719
#: n:23
msgid "BEGIN with no matching END in this file"
msgstr "BEGIN ohne entsprechendes END in dieser Datei"

#: ../src/datain.c:363
#: ../src/img_hosted.c:30
#: ../src/printwx.cc:1516
#: n:24
#, c-format
msgid "Couldn’t open data file “%s”"
msgstr "Datendatei »%s« konnte nicht geöffnet oder gefunden werden"

#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
#. deprecated, so this error would be generated by:
#.
#. *equate \foo.7 1
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:454
#: ../src/readval.c:90
#: ../src/readval.c:94
#: n:25
msgid "ROOT is deprecated"
msgstr "ROOT ist veraltet"

#. TRANSLATORS: A station must be exported out of each level it is in, so
#. this would give "Station “\outer.inner.1” not exported from survey
#. “\outer”)":
#.
#. *equate entrance outer.inner.1
#. *begin outer
#. *begin inner
#. *export 1
#. 1 2 1.23 045 -6
#. *end inner
#. *end outer
#: ../src/commands.c:913
#: ../src/listpos.c:107
#: ../src/readval.c:325
#: n:26
#, c-format
msgid "Station “%s” not exported from survey “%s”"
msgstr "Messpunkt »%s« nicht aus Vermessung »%s« exportiert"

#. TRANSLATORS: This error occurs if there's an attempt to
#. export a station from a survey which doesn't actually exist.
#: ../src/listpos.c:113
#: n:286
#, c-format
msgid "Reference to station “%s” from non-existent survey “%s”"
msgstr "Referenz zu Messpunkt »%s« aus nicht existierender Vermessung »%s«"

#: ../src/readval.c:297
#: n:27
#, c-format
msgid "“%s” can’t be both a station and a survey"
msgstr "»%s« kann nicht ein Messpunkt und eine Vermessung sein"

#: ../src/extend.c:247
#: ../src/extend.c:266
#: ../src/extend.c:311
#: ../src/extend.c:353
#: ../src/extend.c:395
#: ../src/readval.c:202
#: n:28
msgid "Expecting station name"
msgstr "Messpunktname erwartet"

#. TRANSLATORS: e.g.
#.
#. *begin crawl
#. 1 2 9.45 234 -01
#. *end crawl
#. *begin crawl    # <- warning here
#. 2 3 7.67 223 -03
#. *end crawl
#.
#. If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:530
#: n:29
#, fuzzy
msgid "Reentering an existing survey is deprecated"
msgstr "Erneutes Einführen einer Vermessung ist veraltet"

#: ../src/commands.c:536
#: n:30
msgid "Originally entered here"
msgstr "Bereits hier verwendet"

#: ../src/commands.c:1597
#: n:31
#, c-format
msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
msgstr "»EQUATES«, »EXPORTS« oder »PLUMBS« erwartet, »%s« gelesen"

#: ../src/commands.c:1604
#: n:32
#, c-format
msgid "Found “%s”, expecting “ON” or “OFF”"
msgstr "»ON« oder »OFF« erwartet, »%s« gelesen"

#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
#. translated.
#: ../src/commands.c:875
#: n:33
msgid "Only one station in EQUATE command"
msgstr "Nur ein Messpunkt im EQUATE-Befehl angegeben"

#: ../src/commands.c:401
#: n:34
#, c-format
msgid "Unknown quantity “%s”"
msgstr "Unbekannte Größe »%s«"

#: ../src/commands.c:318
#: n:35
#, c-format
msgid "Unknown units “%s”"
msgstr "Unbekannte Einheit(en) »%s«"

#. TRANSLATORS: Used when a BEGIN command has no survey, but the
#. END command does, e.g.:
#.
#. *begin
#. 1 2 10.00 178 -01
#. *end entrance      <--[Message given here]
#: ../src/commands.c:667
#: n:36
#, fuzzy
msgid "Matching BEGIN command has no survey name"
msgstr "Zugehöriges BEGIN hatte kein Vermessungsnamen"

#. TRANSLATORS: Note: In English you talk about the *units* of a single
#. measurement, but the correct term in other languages may be singular.
#: ../src/commands.c:331
#: n:37
#, c-format
msgid "Invalid units “%s” for quantity"
msgstr "Unpassende Einheit »%s« für diese Größe"

#. TRANSLATORS: nasty hack - this message is for the .3d img code, and all
#. errors there take a filename parameter - we don’t really want it here,
#. so lose it with "%.0s" (which should display 0 characters from the
#. filename) FIXME: sort out this
#: ../src/img_hosted.c:35
#: n:38
msgid "Out of memory %.0s"
msgstr "Nicht genug Speicher vorhanden %.0s"

#: ../src/commands.c:394
#: n:39
#, c-format
msgid "Unknown instrument “%s”"
msgstr "Unbekanntes Instrument »%s«"

#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
#. translate
#: ../src/commands.c:1414
#: n:40
msgid "Scale factor must be 1.0 for DECLINATION"
msgstr "Skalenfaktor für die DECLINATION muss 1.0 sein"

#. TRANSLATORS: If the scale factor for an instrument is zero, then any
#. reading would be mapped to zero, which doesn't make sense.
#: ../src/commands.c:1420
#: n:391
msgid "Scale factor must be non-zero"
msgstr "Skalenfaktor muss von Null verschieden sein"

#: ../src/commands.c:1465
#: n:41
#, c-format
msgid "Unknown setting “%s”"
msgstr "Ungültige Einstellung »%s«"

#: ../src/commands.c:439
#: n:42
#, c-format
msgid "Unknown character class “%s”"
msgstr "Unbekannte Zeichenklasse »%s«"

#: ../src/extend.c:604
#: ../src/netskel.c:90
#: n:43
msgid "No survey data"
msgstr "Keine Vermessungsdaten vorhanden"

#: ../src/filename.c:52
#: ../src/img_hosted.c:36
#: n:44
#, c-format
msgid "Filename “%s” refers to directory"
msgstr "Dateiname »%s« bezeichnet ein Verzeichnis"

#: ../src/netartic.c:384
#: n:45
msgid "Survey not all connected to fixed stations"
msgstr "Teile der Vermessung sind nicht mit festen Messpunkten verbunden"

#: ../src/commands.c:808
#: ../src/datain.c:645
#: n:46
msgid "Station already fixed or equated to a fixed point"
msgstr "Messpunkt ist schon fest oder gleich einem festen Punkt"

#: ../src/cavern.c:295
#: ../src/filename.c:55
#: ../src/img_hosted.c:37
#: n:47
#, c-format
msgid "Failed to open output file “%s”"
msgstr "Ausgabedatei »%s« konnte nicht geöffnet werden"

#: ../src/commands.c:1520
#: n:48
msgid "Standard deviation must be positive"
msgstr "Standardabweichung muss positiv sein"

#. TRANSLATORS: as in: Usage: cavern …
#: ../src/cmdline.c:168
#: n:49
msgid "Usage"
msgstr "Aufruf"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#.
#. %s is replaced by the name of the station.
#: ../src/netbits.c:333
#: n:50
#, c-format
msgid "Survey leg with same station (“%s”) at both ends - typing error?"
msgstr "Messstrecke mit einem auf sich selbst bezogenen Messpunkt (»%s«) – Tippfehler?"

#. TRANSLATORS: Degrees are the angular measurement where there are
#. 360 in a full circle.
#: ../src/datain.c:931
#: ../src/datain.c:939
#: ../src/datain.c:951
#: n:51
msgid "Clino reading over 90 degrees (absolute value)"
msgstr "Neigungseintrag übertrifft 90 Grad (Absolutwert)"

#: ../src/netbits.c:422
#: n:52
#, c-format
msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
msgstr "Versuch, zwei verschiedene feste Messpunkte gleichzusetzen: »%s« und »%s«"

#. TRANSLATORS: "equal" as in:
#.
#. *fix a 1 2 3
#. *fix b 1 2 3
#. *equate a b
#: ../src/netbits.c:433
#: n:53
#, c-format
msgid "Equating two equal fixed points: “%s” and “%s”"
msgstr "Zwei identische feste Punkte miteinander gleichgesetzt: »%s« und »%s«"

#. TRANSLATORS: " *fix a " gives this message:
#: ../src/commands.c:731
#: n:54
msgid "FIX command with no coordinates - fixing at (0,0,0)"
msgstr "FIX-Befehl ohne Koordinatenwerte, wurde auf (0,0,0) gesetzt"

#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
#: ../src/commands.c:812
#: ../src/datain.c:647
#: n:55
msgid "Station already fixed at the same coordinates"
msgstr "Messpunkt schon auf die gleichen Koordinaten festgelegt"

#: ../src/commands.c:723
#: n:56
msgid "More than one FIX command with no coordinates"
msgstr "Mehr als ein FIX-Befehl ohne Koordinaten"

#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
#. <SURVEY>, so this would generate this error:
#.
#. *begin fred
#. 1 2 1.23 045 -6
#. *export 2
#. *end fred
#: ../src/commands.c:1794
#: n:57
msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
msgstr "*EXPORT muss unmittelbar auf »*BEGIN <VERMESSUNG>« folgen"

#: ../src/readval.c:515
#: n:58
msgid "Invalid year (< 1900 or > 2078)"
msgstr "Ungültiges Jahr (< 1900 oder > 2078)"

#. TRANSLATORS: Suspicious means something like 410 degrees or -20
#. degrees
#: ../src/datain.c:829
#: ../src/datain.c:838
#: n:59
msgid "Suspicious compass reading"
msgstr "Seltsamer Kompasswert"

#: ../src/datain.c:1468
#: n:60
msgid "Negative tape reading"
msgstr "Negativer Längeneintrag"

#: ../src/commands.c:725
#: n:61
msgid "Same station fixed twice with no coordinates"
msgstr "Gleicher Messpunkt zweimal ohne Koordinaten angegeben"

#. TRANSLATORS: This means that the data fed in said this.
#.
#. It could be a gross error (e.g. the decimal point is missing from the
#. depth gauge reading) or it could just be due to random error on a near
#. vertical leg
#: ../src/datain.c:1167
#: n:62
msgid "Tape reading is less than change in depth"
msgstr "Längeneintrag ist kleiner als Höhenunterschied"

#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
#. neither style nor reading is a keyword in the program This error
#. complains about a depth gauge reading in normal style, for example
#: ../src/commands.c:1136
#: n:63
#, c-format
msgid "Reading “%s” not allowed in data style “%s”"
msgstr "Messgröße »%s« ist beim Datenformat »%s« nicht erlaubt"

#. TRANSLATORS: i.e. not enough readings for the style.
#: ../src/commands.c:1321
#: n:64
#, c-format
msgid "Too few readings for data style “%s”"
msgstr "Zu wenige Messwerte für Datenformat »%s«"

#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
#: ../src/commands.c:1096
#: n:65
#, c-format
msgid "Data style “%s” unknown"
msgstr "Datenformat »%s« unbekannt"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#.
#. Exporting a station twice gives this error:
#.
#. *begin example
#. *export 1
#. *export 1
#. 1 2 1.24 045 -6
#. *end example
#: ../src/commands.c:966
#: n:66
#, c-format
msgid "Station “%s” already exported"
msgstr "Messpunkt »%s« ist bereits exportiert"

#. TRANSLATORS: complains about a situation like trying to define
#. two from stations per leg
#: ../src/commands.c:1162
#: n:67
#, c-format
msgid "Duplicate reading “%s”"
msgstr "Messgröße »%s« mehrfach angegeben"

#: ../src/commands.c:839
#: n:68
#, c-format
msgid "FLAG “%s” unknown"
msgstr "FLAG »%s« unbekannt"

#: ../src/readval.c:472
#: n:69
msgid "Missing \""
msgstr "\" fehlt"

#. TRANSLATORS: Here "station" is a survey station, not a train station.
#: ../src/listpos.c:125
#: n:70
#, fuzzy, c-format
msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
msgstr "Messpunkt »%s« nur einmal erwähnt, mit explizitem Präfix - Tippfehler?"

#. TRANSLATORS: Here "station" is a survey station, not a train
#. station.
#: ../src/netartic.c:396
#: n:71
msgid "The following survey stations are not attached to a fixed point:"
msgstr "Die folgenden Messpunkte haben keine festen Koordinaten:"

#: ../src/netskel.c:129
#: n:72
#, c-format
msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
msgstr "Vermessung hat keine Festpunkte. %s wurde als Nullpunkt (0,0,0) gewählt"

#. TRANSLATORS: fixed survey station that is not part of any survey
#: ../src/netskel.c:951
#: n:73
#, c-format
msgid "Unused fixed point “%s”"
msgstr "Fester Messpunkt »%s« wird nicht verwendet"

#: ../src/matrix.c:123
#: n:74
msgid "Network solved by reduction - no simultaneous equations to solve."
msgstr "Netzausgleichung gelöst durch Reduktion - kein Gleichungssystem erforderlich."

#: ../src/matrix.c:134
#: n:75
#, c-format
msgid "Solving %d simultaneous equations"
msgstr "Löse System mit %d Gleichungen und Unbekannten"

#: ../src/commands.c:1224
#: n:77
#, c-format
msgid "Reading “%s” duplicates previous reading(s)"
msgstr "Eintrag »%s« wiederholt frühere(n)"

#: ../src/matrix.c:132
#: n:78
msgid "Solving one equation"
msgstr "Eine Gleichung wird gelöst"

#: ../src/datain.c:902
#: ../src/datain.c:1156
#: ../src/datain.c:1349
#: n:79
msgid "Negative adjusted tape reading"
msgstr "Negative korrigierte Streckenlänge"

#: ../src/commands.c:1703
#: ../src/commands.c:1723
#: n:80
msgid "Date is in the future!"
msgstr "Datum liegt in der Zukunft!"

#: ../src/commands.c:1727
#: n:81
msgid "End of date range is before the start"
msgstr "Das Enddatum ist früher als das Anfangsdatum"

#: ../src/avenprcore.cc:125
#: n:82
#, c-format
msgid "Parameter “%s” has invalid value “%s” in printer configuration file"
msgstr "Parameter »%s« hat den ungültigen Wert »%s« in der Druckerkonfigurationsdatei"

#. TRANSLATORS: e.g. the user specifies a passage cross-section at
#. station "entrance.27", but there is no station "entrance.27" in
#. the centre-line.
#: ../src/netskel.c:1039
#: n:83
#, c-format
msgid "Cross section specified at non-existent station “%s”"
msgstr "Überschneidung an nicht existierendem Messpunkt »%s« angegeben"

#. TRANSLATORS: In data with backsights, the user has tried to give a
#. plumb for the foresight and a clino reading for the backsight, or
#. something similar.
#: ../src/datain.c:968
#: ../src/datain.c:992
#: n:84
msgid "CLINO and BACKCLINO readings must be of the same type"
msgstr "CLINO- und BACKCLINO-Eintrag müssen den gleichen Typ haben"

#: ../src/avenprcore.cc:120
#: n:85
#, c-format
msgid "Parameter “%s” missing in printer configuration file"
msgstr "Parameter »%s« fehlt in der Druckerkonfigurationsdatei"

#: ../src/readval.c:523
#: n:86
msgid "Invalid month"
msgstr "Ungültiger Monat"

#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
#: ../src/readval.c:532
#: n:87
msgid "Invalid day of the month"
msgstr "Ungültiger Monatstag"

#: ../src/cavern.c:244
#: n:88
#, c-format
msgid "3d file format versions %d to %d supported"
msgstr "Versionen %d bis %d des 3D-Dateiformats werden unterstützt"

#, c-format
#~ msgid "Error in format of font file “%s”"
#~ msgstr "Formatfehler in der Schriftdatei »%s«"

#: ../src/readval.c:200
#: n:89
msgid "Expecting survey name"
msgstr "Name einer Vermessung erwartet"

#. TRANSLATORS: Program will exit shortly after printing this
#: ../src/message.c:227
#: n:90
msgid "Abnormal termination"
msgstr "Programmabbruch"

#: ../src/message.c:228
#: n:91
msgid "Arithmetic error"
msgstr "Arithmetikfehler"

#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
#. opcodes -- corrupted program?
#: ../src/message.c:231
#: n:92
msgid "Illegal instruction"
msgstr "Illegaler CPU-Befehlscode"

#: ../src/extend.c:553
#: ../src/mainfrm.cc:388
#: ../src/sorterr.c:146
#: n:93
#, c-format
msgid "Couldn’t open file “%s”"
msgstr "Datei »%s« konnte nicht geöffnet werden"

#: ../src/printwx.cc:624
#: n:402
#, c-format
msgid "Couldn’t write file “%s”"
msgstr "In die Datei »%s« konnte nicht geschrieben werden"

#: ../src/message.c:232
#: n:94
msgid "Bad memory access"
msgstr "Fehler beim Speicherzugriff"

#. TRANSLATORS: If you're unsure what "deprecated" means, see:
#. http://en.wikipedia.org/wiki/Deprecation
#: ../src/commands.c:458
#: ../src/commands.c:541
#: ../src/commands.c:563
#: ../src/commands.c:1111
#: ../src/commands.c:1448
#: ../src/readval.c:96
#: n:95
msgid "Further uses of this deprecated feature will not be reported"
msgstr "Weitere Vorkommen dieser veralteten Funktionalität werden nicht gemeldet werden"

#: ../src/message.c:233
#: n:97
msgid "Unknown signal received"
msgstr "Unbekanntes Signal erhalten"

#. TRANSLATORS: Degrees are the angular measurement where there are
#. 360 in a full circle.
#: ../src/datain.c:868
#: n:98
#, c-format
msgid "COMPASS reading and BACKCOMPASS reading disagree by %s degrees"
msgstr "COMPASS- und BACKCOMPASS-Eintrag differieren um %s Grad"

#. TRANSLATORS: Degrees are the angular measurement where
#. there are 360 in a full circle.
#: ../src/datain.c:1044
#: n:99
#, c-format
msgid "CLINO reading and BACKCLINO reading disagree by %s degrees"
msgstr "CLINO- und BACKCLINO-Eintrag differieren um %s Grad"

#: ../src/cad3d.c:661
#: n:100
msgid "do not generate station markers"
msgstr "Keine Messpunktmarkierungen erzeugen"

#: ../src/cad3d.c:662
#: n:101
msgid "do not generate station labels"
msgstr "Keine Messpunktbezeichnungen erzeugen"

#: ../src/cad3d.c:663
#: n:102
msgid "do not generate survey legs"
msgstr "Keine Messstrecken erzeugen"

#: ../src/cad3d.c:667
#: n:103
msgid "produce an elevation view"
msgstr "Aufrissansicht erzeugen"

#: ../src/commands.c:1108
#: n:104
#, c-format
msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
msgstr "»*data %s %c …« ist veraltet - verwenden Sie stattdessen »*data %s …«"

#: ../src/extend.c:506
#: n:105
msgid "Reading in data - please wait…"
msgstr "Daten werden eingelesen - bitte warten…"

#. TRANSLATORS: Perhaps the user tried to load a different type of file as
#. a Survex .3d file, or the .3d file was corrupted.
#: ../src/3dtopos.c:157
#: ../src/3dtopos.c:163
#: ../src/cad3d.c:905
#: ../src/cad3d.c:916
#: ../src/img_hosted.c:40
#: n:106
#, c-format
msgid "Bad 3d image file “%s”"
msgstr "3D-Bilddatei »%s« ist fehlerhaft"

#. TRANSLATORS: This is the date format string used to timestamp .3d
#. files internally.  Probably best to keep it the same for all
#. translations.
#: ../src/img.c:43
#: ../src/mainfrm.cc:1404
#: n:107
#, c-format
msgid "%a,%Y.%m.%d %H:%M:%S %Z"
msgstr "%a,%Y.%m.%d %H:%M:%S %Z"

#. TRANSLATORS: used a processed survey with no processing date/time info
#: ../src/mainfrm.cc:1397
#: n:108
msgid "Date and time not available."
msgstr "Datum und Uhrzeit nicht feststellbar."

#: ../src/img_hosted.c:41
#: n:109
#, c-format
msgid "Error reading from file “%s”"
msgstr "Fehler beim Lesen der Datei »%s«"

#: ../src/filename.c:79
#: ../src/img_hosted.c:42
#: ../src/mainfrm.cc:346
#: ../src/mainfrm.cc:1912
#: n:110
#, c-format
msgid "Error writing to file “%s”"
msgstr "Fehler beim Schreiben in die Datei »%s«"

#: ../src/filename.c:82
#: n:111
msgid "Error writing to file"
msgstr "Fehler beim Schreiben in eine Datei"

#: ../src/sorterr.c:81
#: ../src/sorterr.c:98
#: ../src/sorterr.c:170
#: n:112
msgid "Couldn’t parse .err file"
msgstr ".err-Datei konnte nicht interpretiert werden"

#: ../src/cavern.c:387
#: n:113
#, c-format
msgid "There were %d warning(s) and %d error(s) - no output files produced."
msgstr "Es gab %d Warnungen und %d Fehler - keine Ausgabedatei erstellt."

#: ../src/img_hosted.c:43
#: n:114
#, c-format
msgid "File “%s” has a newer format than this program can understand"
msgstr "Datei »%s« ist in einem neueren Format, als dieses Programm verarbeiten kann"

#: ../src/printwx.cc:968
#: n:115
msgid "North"
msgstr "Norden"

#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
#: ../src/printwx.cc:995
#: n:116
msgid "Elevation on"
msgstr "Aufriss auf die Ebene"

#: ../src/printwx.cc:437
#: n:117
msgid "P&lan view"
msgstr "&Grundriss"

#: ../src/printwx.cc:439
#: n:285
msgid "&Elevation"
msgstr "&Aufriss"

#: ../src/gfxcore.cc:793
#: ../src/mainfrm.cc:128
#: n:118
msgid "Elevation"
msgstr "Aufriss"

#: ../src/gfxcore.cc:705
#: n:432
msgid "Plan"
msgstr "Grundriss"

#: ../src/gfxcore.cc:715
#: n:433
msgid "Kiwi Plan"
msgstr ""

#: ../src/cavern.c:349
#: n:120
msgid "Calculating statistics"
msgstr "Statistik wird berechnet"

#: ../src/readval.c:486
#: n:121
msgid "Expecting string field"
msgstr "Textfeld erwartet"

#: ../src/cmdline.c:212
#: n:122
msgid "too few arguments"
msgstr "zu wenige Argumente"

#: ../src/cmdline.c:219
#: n:123
msgid "too many arguments"
msgstr "zu viele Argumente"

#: ../src/cmdline.c:178
#: ../src/cmdline.c:181
#: ../src/cmdline.c:185
#: n:124
msgid "FILE"
msgstr "DATEI"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:170
#: n:125
msgid "Removing trailing traverses"
msgstr "Einseitig angeschlossene Messzüge werden entfernt"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#: ../src/netskel.c:229
#: n:126
msgid "Concatenating traverses"
msgstr "Messzüge zwischen Abzweigungen werden verbunden"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#: ../src/netskel.c:427
#: n:127
msgid "Calculating traverses"
msgstr "Messzüge zwischen Abzweigungen werden berechnet"

#. TRANSLATORS: In French, Eric chose to use the terminology used by
#. toporobot: "sequence" for the English "traverse", which makes sense
#. (although toporobot actually uses this term to mean something more
#. specific).  Feel free to follow this lead if you can't think of a better
#. term - these messages mostly indicate how processing is progressing.
#.
#. A trailing traverse is a dead end back to a junction.
#: ../src/netskel.c:772
#: n:128
msgid "Calculating trailing traverses"
msgstr "Einseitig angeschlossene Messzüge werden berechnet"

#: ../src/network.c:82
#: n:129
msgid "Simplifying network"
msgstr "Netzwerk wird vereinfacht"

#: ../src/network.c:540
#: n:130
msgid "Calculating network"
msgstr "Netzwerk wird ausgeglichen"

#: ../src/datain.c:1458
#: n:131
#, c-format
msgid "Found “%s”, expecting “F” or “B”"
msgstr "»F« oder »B« erwartet, »%s« gelesen"

#: ../src/cavern.c:448
#: n:132
#, c-format
msgid "Total length of survey legs = %7.2fm (%7.2fm adjusted)"
msgstr "Gesamtlänge der Messstrecken = %7.2fm (%7.2fm ausgeglichen)"

#: ../src/cavern.c:451
#: n:133
#, c-format
msgid "Total plan length of survey legs = %7.2fm"
msgstr "Gesamte Horizontallänge der Messstrecken = %7.2fm"

#: ../src/cavern.c:454
#: n:134
#, c-format
msgid "Total vertical length of survey legs = %7.2fm"
msgstr "Gesamte Vertikallänge der Messstrecken = %7.2fm"

#. TRANSLATORS: numbers are altitudes of highest and lowest stations
#: ../src/cavern.c:461
#: n:135
#, c-format
msgid "Vertical range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Vertikale Erstreckung = %4.2fm (von %s auf %4.2fm bis %s auf %4.2fm)"

#. TRANSLATORS: c.f. previous message
#: ../src/cavern.c:463
#: n:136
#, c-format
msgid "North-South range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Nord-Süd-Erstreckung = %4.2fm (von %s bei %4.2fm bis %s bei %4.2fm)"

#. TRANSLATORS: c.f. previous two messages
#: ../src/cavern.c:465
#: n:137
#, c-format
msgid "East-West range = %4.2fm (from %s at %4.2fm to %s at %4.2fm)"
msgstr "Ost-West-Erstreckung = %4.2fm (von %s bei %4.2fm bis %s bei %4.2fm)"

#: ../src/cavern.c:433
#: n:138
msgid "There is 1 loop."
msgstr "Es gibt eine Ringverbindung."

#: ../src/cavern.c:435
#: n:139
#, c-format
msgid "There are %ld loops."
msgstr "Es gibt %ld Ringverbindungen."

#: ../src/cavern.c:371
#: n:140
#, c-format
msgid "CPU time used %5.2fs"
msgstr "Benötigte Rechenzeit (CPU) %5.2fs"

#: ../src/cavern.c:374
#: n:141
#, c-format
msgid "Time used %5.2fs"
msgstr "Benötigte Zeit %5.2fs"

#: ../src/cavern.c:376
#: n:142
msgid "Time used unavailable"
msgstr "Benötigte Zeit nicht feststellbar"

#: ../src/cavern.c:379
#: n:143
#, c-format
msgid "Time used %5.2fs (%5.2fs CPU time)"
msgstr "Benötigte Zeit %5.2fs (%5.2fs CPU-Zeit)"

#: ../src/cavern.c:383
#: n:144
msgid "Done."
msgstr "Fertig."

#: ../src/netskel.c:737
#: n:145
#, c-format
msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
msgstr "Ursprüngliche Länge %6.2fm (%3d Strecken), verändert um %6.2fm (%5.2fm/Messstrecke). "

#: ../src/netskel.c:740
#: n:146
#, c-format
msgid "Error %6.2f%%"
msgstr "Fehler %6.2f%%"

#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
#. traverse has zero length, so error per metre is meaningless.
#.
#. There should be 4 spaces between "Error" and "N/A" so that it lines
#. up with the numbers in the message above.
#: ../src/netskel.c:747
#: n:147
msgid "Error    N/A"
msgstr "Fehler   belanglos"

#: ../src/cad3d.c:664
#: n:148
#, c-format
msgid "generate grid (default %sm)"
msgstr "Gitter erzeugen (Vorgabe %sm)"

#: ../src/cad3d.c:665
#: n:149
#, c-format
msgid "station labels text height (default %s)"
msgstr "Texthöhe der Messpunktbezeichnungen (Vorgabe %s)"

#: ../src/cad3d.c:666
#: n:152
#, c-format
msgid "station marker size (default %s)"
msgstr "Messpunktmarkierungsgröße (Vorgabe %s)"

#: ../src/cad3d.c:668
#: n:155
#, c-format
msgid "factor to scale down by (default %s)"
msgstr "Faktor für Herunterskalieren (Vorgabe %s)"

#: ../src/cad3d.c:669
#: n:156
msgid "produce DXF output"
msgstr "DXF-Ausgabe erzeugen"

#: ../src/cad3d.c:670
#: n:158
msgid "produce Skencil output"
msgstr "Skencil-Ausgabe erzeugen"

#: ../src/cad3d.c:671
#: n:159
msgid "produce Compass PLT output for Carto"
msgstr "Compass PLT-Ausgabe für Carto erzeugen"

#: ../src/cad3d.c:672
#: n:160
msgid "produce SVG output"
msgstr "SVG-Ausgabe erzeugen"

#. TRANSLATORS: description of --help option
#: ../src/cmdline.c:138
#: n:150
msgid "display this help and exit"
msgstr "Diese Hilfemeldung anzeigen und Beenden"

#. TRANSLATORS: description of --verbose option
#: ../src/cmdline.c:141
#: n:151
msgid "output version information and exit"
msgstr "Versionsinformation ausgeben und beenden"

#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
#: ../src/cmdline.c:170
#: n:153
msgid "OPTION"
msgstr "OPTION"

#: ../src/mainfrm.cc:132
#: ../src/printwx.cc:385
#: ../src/printwx.cc:1040
#: ../src/printwx.cc:1089
#: n:154
msgid "Scale"
msgstr "Maßstab"

#: ../src/cmdline.c:194
#: n:157
#, c-format
msgid "Try “%s --help” for more information.\n"
msgstr "Versuchen Sie »%s --help« für weitere Hinweise.\n"

#: ../src/avenprcore.cc:269
#: n:166
#, c-format
msgid "Page %d of %d"
msgstr "Seite %d von %d"

#: ../src/avenprcore.cc:272
#: ../src/printwx.cc:1522
#: n:167
#, c-format
msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
msgstr "Vermessung »%s«   Seite %d (von %d)   Berechnung von Seite %s"

#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
#. something like "123°".  The bearing is up the page.
#: ../src/printwx.cc:976
#: n:168
#, c-format
msgid "Plan view, %s up page"
msgstr "Grundriß, %s oben"

#. TRANSLATORS: This is used on printouts of elevations, with %s
#. replaced by something like "123°".  The bearing is the direction
#. we’re looking.
#: ../src/printwx.cc:1014
#: n:169
#, c-format
msgid "Elevation facing %s"
msgstr "Aufriss in Richtung %s"

#. TRANSLATORS: This is used on printouts of tilted elevations, with
#. the first %s replaced by something like "123°", and the second by
#. something like "-45°".  The bearing is the direction we’re
#. looking.
#: ../src/printwx.cc:1023
#: n:284
#, c-format
msgid "Elevation facing %s, tilted %s"
msgstr "Aufriss in Richtung %s, Neigung %s"

#. TRANSLATORS: This is used on printouts of extended elevations.
#: ../src/printwx.cc:1032
#: n:191
msgid "Extended elevation"
msgstr "Abwicklung"

#: ../src/cavern.c:419
#: n:172
msgid "Survey contains 1 survey station,"
msgstr "Vermessung enthält 1 Messpunkt,"

#: ../src/cavern.c:421
#: n:173
#, c-format
msgid "Survey contains %ld survey stations,"
msgstr "Vermessung enthält %ld Messpunkte,"

#: ../src/cavern.c:425
#: n:174
msgid " joined by 1 leg."
msgstr " verbunden durch 1 Messstrecke."

#: ../src/cavern.c:427
#: n:175
#, c-format
msgid " joined by %ld legs."
msgstr " verbunden durch %ld Messstrecken."

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:188
#: n:176
msgid "node"
msgstr "Verzweigungspunkt"

#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
#: ../src/listpos.c:190
#: n:177
msgid "nodes"
msgstr "Verzweigungspunkte"

#. TRANSLATORS: "Connected component" in the graph theory sense - it
#. means there are %ld bits of survey with no connections between them.
#. This message is only used if there are more than 1.
#: ../src/cavern.c:444
#: n:178
#, c-format
msgid "Survey has %ld connected components."
msgstr "Netzwerk hat %ld zusammenhängende Teile."

#. TRANSLATORS: Label for button in aven’s cavern log window which
#. causes the survey data to be reprocessed.
#: ../src/cavernlog.cc:400
#: ../src/cavernlog.cc:411
#: n:184
msgid "Reprocess"
msgstr "Neu berechnen"

#: ../src/cmdline.c:242
#: ../src/cmdline.c:261
#: n:185
#, c-format
msgid "numeric argument “%s” out of range"
msgstr "Numerisches Argument »%s« ist nicht im gültigen Bereich"

#: ../src/cmdline.c:244
#: n:186
#, c-format
msgid "argument “%s” not an integer"
msgstr "Argument »%s« ist keine Ganzzahl"

#: ../src/cmdline.c:263
#: n:187
#, c-format
msgid "argument “%s” not a number"
msgstr "Argument »%s« ist keine Zahl"

#: ../src/commands.c:854
#: n:188
msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "»DUPLICATE«, »SPLAY« oder »SURFACE« erwartet"

#: ../src/commands.c:857
#: n:189
msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
msgstr "»NOT«, »DUPLICATE«, »SPLAY« oder »SURFACE« erwartet"

#: ../src/listpos.c:82
#: n:190
#, c-format
msgid "Station “%s” referred to by *entrance or *export but never used"
msgstr "In *entrance oder *export wird sich auf den Messpunkt »%s« bezogen, er wird aber nirgends verwendet"

#: ../src/commands.c:643
#: n:192
msgid "No matching BEGIN"
msgstr "Kein entsprechendes BEGIN"

#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
#. same <survey> if it’s given at all
#: ../src/commands.c:671
#: n:193
#, fuzzy
msgid "Survey name doesn’t match BEGIN"
msgstr "Vermessungsnamen passt nicht zu BEGIN"

#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
#. END command omits it, e.g.:
#.
#. *begin entrance
#. 1 2 10.00 178 -01
#. *end     <--[Message given here]
#: ../src/commands.c:680
#: n:194
#, fuzzy
msgid "Survey name omitted from END"
msgstr "Vermessungsnamen vor END fehlt"

#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the “,”s
#. (or at least the columns) are in the same place
#: ../src/3dtopos.c:112
#: n:195
msgid "( Easting, Northing, Altitude )"
msgstr "( Rechtsw.,Hochwert, Höhe     )"

#. TRANSLATORS: bpp is "Bits Per Pixel"
#: ../src/aboutdlg.cc:181
#: n:196
#, c-format
msgid "Display Depth: %d bpp"
msgstr "Farbtiefe: %d bpp"

#. TRANSLATORS: appended to previous message if the display is colour
#: ../src/aboutdlg.cc:183
#: n:197
msgid " (colour)"
msgstr " (Farbe)"

#: ../src/readval.c:511
#: ../src/readval.c:521
#: ../src/readval.c:529
#: n:198
#, c-format
msgid "Expecting date, found “%s”"
msgstr "Datum erwartet, »%s« gelesen"

#. TRANSLATORS: --help output for --survey option.
#.
#. "this" has been added to English translation
#: ../src/3dtopos.c:50
#: ../src/aven.cc:66
#: ../src/cad3d.c:660
#: ../src/diffpos.c:57
#: ../src/dump3d.c:49
#: ../src/extend.c:458
#: n:199
msgid "only load the sub-survey with this prefix"
msgstr "Nur Teilvermessung mit diesem Präfix laden"

#. TRANSLATORS: --help output for aven --print option
#: ../src/aven.cc:68
#: n:119
msgid "print and exit (requires a 3d file)"
msgstr "Drucken und Beenden (3D-Datei erforderlich)"

#. TRANSLATORS: --help output for cavern --percentage option
#: ../src/cavern.c:123
#: n:161
msgid "display percentage progress"
msgstr "Fortschrittsanzeige in Prozent anzeigen"

#. TRANSLATORS: --help output for cavern --output option
#: ../src/cavern.c:125
#: n:162
msgid "set location for output files"
msgstr "Ort für Ausgabedateien festlegen"

#. TRANSLATORS: --help output for cavern --quiet option
#: ../src/cavern.c:127
#: n:163
msgid "only show brief summary (-qq for errors only)"
msgstr "Nur kurze Zusammenfassung zeigen (-qq zeigt nur Fehler)"

#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
#: ../src/cavern.c:129
#: n:164
msgid "do not create .err file"
msgstr "Keine .err-Datei erstellen"

#. TRANSLATORS: --help output for cavern --warnings-are-errors option
#: ../src/cavern.c:131
#: n:165
msgid "turn warnings into errors"
msgstr "Warnungen als Fehler behandeln"

#. TRANSLATORS: --help output for cavern --log option
#: ../src/cavern.c:133
#: n:170
msgid "log output to .log file"
msgstr "Ausgabe in .log-Datei protokollieren"

#. TRANSLATORS: --help output for cavern --3d-version option
#: ../src/cavern.c:135
#: n:171
msgid "specify the 3d file format version to output"
msgstr "Version des 3D-Dateiformats für die Ausgabe"

#. TRANSLATORS: --help output for sorterr --horizontal option
#: ../src/sorterr.c:53
#: n:179
msgid "sort by horizontal error factor"
msgstr "Nach horizontalem Fehlerfaktor sortieren"

#. TRANSLATORS: --help output for sorterr --vertical option
#: ../src/sorterr.c:55
#: n:180
msgid "sort by vertical error factor"
msgstr "Nach vertikalem Fehlerfaktor sortieren"

#. TRANSLATORS: --help output for sorterr --percentage option
#: ../src/sorterr.c:57
#: n:181
msgid "sort by percentage error"
msgstr "Nach prozentualem Fehlerfaktor sortieren"

#. TRANSLATORS: --help output for sorterr --per-leg option
#: ../src/sorterr.c:59
#: n:182
msgid "sort by error per leg"
msgstr "Nach Fehlern pro Messstrecke sortieren"

#. TRANSLATORS: --help output for sorterr --replace option
#: ../src/sorterr.c:61
#: n:183
msgid "replace .err file with resorted version"
msgstr ".err-Datei durch sortierte Version ersetzen"

#. TRANSLATORS: --help output for dump3d --rewind option
#: ../src/dump3d.c:51
#: n:204
msgid "rewind file and read it a second time"
msgstr "An den Anfang der Datei und neu einlesen"

#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
#. meaningless to say your tape is marked in "0 feet" (but you might
#. measure distance by counting knots on a diving line, and tie them
#. every "2 feet").
#: ../src/commands.c:1368
#: n:200
msgid "*UNITS factor must be non-zero"
msgstr "Faktor nach *UNITS muss von Null verschieden sein"

#. TRANSLATORS: In the "File" menu
#: ../src/mainfrm.cc:765
#: n:201
msgid "&Screenshot…"
msgstr "Bildschirm&abzug…"

#: ../src/mainfrm.cc:1414
#: n:202
#, c-format
msgid "No survey data in 3d file “%s”"
msgstr "Keine Vermessungsdaten in 3D-Datei »%s«"

#: ../src/gfxcore.cc:695
#: n:203
msgid "Facing"
msgstr "Blickricht."

#. TRANSLATORS: for the title of the About box
#: ../src/aboutdlg.cc:70
#: n:205
#, c-format
msgid "About %s"
msgstr "Über %s"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. File->Open dialog:
#: ../src/mainfrm.cc:1884
#: n:206
msgid "Select a survey file to view"
msgstr "Vermessungsdatei zur Ansicht wählen"

#: ../src/mainfrm.cc:1863
#: n:207
msgid "Survex 3d files"
msgstr "Survex 3D-Dateien"

#: ../src/mainfrm.cc:1876
#: ../src/mainfrm.cc:2315
#: ../src/printwx.cc:598
#: n:208
msgid "All files"
msgstr "Alle Dateien"

#. TRANSLATORS: Here "survey" is a "cave map" rather than
#. list of questions - it should be translated to the
#. terminology that cavers using the language would use.
#: ../src/mainfrm.cc:1862
#: n:229
msgid "All survey files"
msgstr "Alle Vermessungsdateien"

#: ../src/mainfrm.cc:1864
#: n:329
msgid "Survex svx files"
msgstr "SVX-Dateien für Survex"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so probably shouldn’t be translated
#: ../src/mainfrm.cc:1872
#: n:330
msgid "Compass DAT and MAK files"
msgstr "Compass DAT- und MAK-Dateien"

#: ../src/printwx.cc:270
#: n:411
msgid "DXF files"
msgstr "DXF-Dateien"

#: ../src/printwx.cc:271
#: n:412
msgid "EPS files"
msgstr "EPS-Dateien"

#: ../src/printwx.cc:272
#: n:413
msgid "GPX files"
msgstr "GPX-Dateien"

#: ../src/printwx.cc:273
#: n:414
msgid "HPGL for plotters"
msgstr "HPGL-Dateien für Plotter"

#: ../src/printwx.cc:274
#: n:415
msgid "Compass PLT for use with Carto"
msgstr "Compass PLT-Dateien für Carto"

#: ../src/printwx.cc:275
#: n:416
msgid "Skencil files"
msgstr "Skencil-Dateien"

#: ../src/printwx.cc:276
#: n:417
msgid "SVG files"
msgstr "SVG-Dateien"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. This string is used in the about box (summarising the purpose of aven).
#: ../src/aboutdlg.cc:94
#: n:209
msgid "Survey visualisation tool"
msgstr "Visualisierungsprogramm für Vermessungsdaten"

#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
#. accelerator key.  The accelerators must be different within this group
#: ../src/mainfrm.cc:924
#: n:210
msgid "&File"
msgstr "&Datei"

#: ../src/mainfrm.cc:925
#: n:211
msgid "&Rotation"
msgstr "&Rotieren"

#: ../src/mainfrm.cc:926
#: n:212
msgid "&Orientation"
msgstr "&Orientierung"

#: ../src/mainfrm.cc:927
#: n:213
msgid "&View"
msgstr "&Ansicht"

#: ../src/mainfrm.cc:929
#: n:214
msgid "&Controls"
msgstr "&Steuerung"

#: ../src/mainfrm.cc:938
#: n:215
msgid "&Help"
msgstr "&Hilfe"

#: ../src/mainfrm.cc:931
#: n:216
msgid "&Presentation"
msgstr "&Präsentation"

#: ../src/aboutdlg.cc:105
#: n:219
msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
msgstr "Dieses Programm ist freie Software. Sie können es unter den Bedingungen der GNU General Public License, wie von der Free Software Foundation herausgegeben, weitergeben und/oder modifizieren, entweder unter Version 2 der Lizenz oder (wenn Sie es wünschen) jeder späteren Version."

#. TRANSLATORS: Part of 3dtopos --help
#: ../src/3dtopos.c:86
#: n:217
msgid "3D_FILE [POS_FILE]"
msgstr "3D-DATEI [POS-DATEI]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:265
#: n:218
msgid "FILE1 FILE2 [THRESHOLD]"
msgstr "DATEI1 DATEI2 [SCHWELLE]"

#. TRANSLATORS: Part of diffpos --help
#: ../src/diffpos.c:267
#: n:255
#, c-format
msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
msgstr "DATEI1 und DATEI2 können .pos- oder .3d-Dateien sein\nSCHWELLE ist die max. zu ignorierende Abweichung entlang beliebiger Achsen in Metern (Vorgabe %s)"

#. TRANSLATORS: Part of extend --help
#: ../src/extend.c:480
#: n:267
msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
msgstr "EINGABE-3D-DATEI [AUSGABE-3D-DATEI]"

#. TRANSLATORS: Part of sorterr --help
#: ../src/sorterr.c:127
#: n:268
msgid "ERR_FILE [HOW_MANY]"
msgstr "ERR-DATEI [WIE_VIELE]"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#.
#. Part of aven --help
#: ../src/aven.cc:115
#: ../src/aven.cc:139
#: n:269
msgid "[SURVEY_FILE]"
msgstr "[VERMESSUNGSDATEI]"

#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
#. accelerator key.
#.
#. The string "\t" separates the menu text and any accelerator key.
#.
#. "File" menu.  The accelerators must be different within this group.
#. c.f. 201, 380, 381.
#: ../src/mainfrm.cc:758
#: n:220
msgid "&Open…\tCtrl+O"
msgstr "Ö&ffnen…\tCtrl+O"

#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
#. are surveys without date information.
#: ../src/gfxcore.cc:1038
#: n:221
msgid "Undated"
msgstr "Nicht datiert"

#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
#. which aren’t part of a loop and so have no error information.
#: ../src/gfxcore.cc:1062
#: n:290
msgid "Not in loop"
msgstr "Nicht in Schleife"

#. TRANSLATORS: error from:
#.
#. *data normal newline from to tape compass clino
#: ../src/commands.c:1212
#: n:222
msgid "NEWLINE can’t be the first reading"
msgstr "NEWLINE kann nicht der erste Eintrag sein"

#. TRANSLATORS: error from:
#.
#. *data normal from to tape compass clino newline
#: ../src/commands.c:1250
#: n:223
msgid "NEWLINE can’t be the last reading"
msgstr "NEWLINE kann nicht der letzte Eintrag sein"

#. TRANSLATORS: Error given by something like:
#.
#. *data normal station tape compass clino
#.
#. ("station" signifies interleaved data).
#: ../src/commands.c:1273
#: n:224
msgid "Interleaved readings, but no NEWLINE"
msgstr "Abwechselnde Einträge, aber kein NEWLINE"

#. TRANSLATORS: caused by e.g.
#.
#. *data diving station newline depth tape compass
#.
#. ("depth" needs to occur before "newline").
#: ../src/commands.c:1149
#: n:225
#, c-format
msgid "Reading “%s” must occur before NEWLINE"
msgstr "Eintrag »%s« muss vor NEWLINE stehen"

#. TRANSLATORS: e.g.
#.
#. *data normal from to tape newline compass clino
#: ../src/commands.c:1202
#: n:226
msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
msgstr "Vor NEWLINE kann nur STATION, DEPTH oder COUNT stehen"

#: ../src/commands.c:1402
#: n:227
msgid "Can’t calibrate angular and length quantities together"
msgstr "Winkel und Längen können nicht gleichzeitig kalibriert werden"

#: ../src/commands.c:590
#: n:397
msgid "Bad *alias command"
msgstr "*alias-Befehl ist fehlerhaft"

#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
#. height values).
#~ msgid "Select a terrain file to view"
#~ msgstr "Geländedatei zur Ansicht wählen"

#~ msgid "Terrain files"
#~ msgstr "Geländedateien"

#. TRANSLATORS: %s will be replaced by the application name ("Aven"
#. currently)
#: ../src/log.cc:32
#: n:228
#, c-format
msgid "%s Error Log"
msgstr "%s-Fehlerprotokoll"

#. TRANSLATORS: The text on the action button in the "Export" settings
#. dialog
#: ../src/printwx.cc:556
#: n:230
msgid "&Export…"
msgstr "&Exportieren…"

#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
#. this group.  Tickable menu item which toggles auto rotation
#: ../src/mainfrm.cc:780
#: n:231
msgid "Au&to-Rotate\tSpace"
msgstr "Auto&matisch rotieren\tSpace"

#: ../src/mainfrm.cc:782
#: n:232
msgid "Speed &Up"
msgstr "&Schneller"

#: ../src/mainfrm.cc:783
#: n:233
msgid "Slow &Down"
msgstr "&Langsamer"

#: ../src/mainfrm.cc:785
#: n:234
msgid "&Reverse Direction"
msgstr "&Andere Richtung"

#: ../src/mainfrm.cc:787
#: n:235
msgid "Step Once &Anticlockwise"
msgstr "Schritt im &Gegenuhrzeigersinn"

#: ../src/mainfrm.cc:788
#: n:236
msgid "Step Once &Clockwise"
msgstr "Schritt im &Uhrzeigersinn"

#. TRANSLATORS: View *looking* North
#: ../src/gfxcore.cc:3188
#: ../src/mainfrm.cc:791
#: n:240
msgid "View &North"
msgstr "Nach &Norden"

#. TRANSLATORS: View *looking* East
#: ../src/gfxcore.cc:3190
#: ../src/mainfrm.cc:792
#: n:241
msgid "View &East"
msgstr "Nach &Osten"

#. TRANSLATORS: View *looking* South
#: ../src/gfxcore.cc:3192
#: ../src/mainfrm.cc:793
#: n:242
msgid "View &South"
msgstr "Nach &Süden"

#. TRANSLATORS: View *looking* West
#: ../src/gfxcore.cc:3194
#: ../src/mainfrm.cc:794
#: n:243
msgid "View &West"
msgstr "Nach &Westen"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:799
#: n:244
msgid "Shift Survey &Left"
msgstr "Nach &links verschieben"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:803
#: n:245
msgid "Shift Survey &Right"
msgstr "Nach &rechts verschieben"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:807
#: n:246
msgid "Shift Survey &Up"
msgstr "Nach o&ben verschieben"

#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
#. - it should be translated to the terminology that cavers using the
#. language would use.
#: ../src/mainfrm.cc:811
#: n:247
msgid "Shift Survey &Down"
msgstr "Nach &unten verschieben"

#: ../src/gfxcore.cc:3208
#: ../src/mainfrm.cc:813
#: n:248
msgid "&Plan View"
msgstr "&Grundriss"

#: ../src/gfxcore.cc:3209
#: ../src/mainfrm.cc:814
#: n:249
msgid "Ele&vation"
msgstr "&Aufriss"

#: ../src/mainfrm.cc:816
#: n:250
msgid "&Higher Viewpoint"
msgstr "&Höherer Standort"

#: ../src/mainfrm.cc:817
#: n:251
msgid "L&ower Viewpoint"
msgstr "Nie&drigerer Standort"

#: ../src/mainfrm.cc:820
#: n:252
msgid "&Zoom In\t]"
msgstr "&Vergrößern\t]"

#: ../src/mainfrm.cc:821
#: n:253
msgid "Zoo&m Out\t["
msgstr "Ver&kleinern\t["

#: ../src/mainfrm.cc:823
#: n:254
msgid "Restore De&fault View"
msgstr "&Zurück zur voreingestellten Ansicht"

#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
#. the "what to print/export" dialog.
#: ../src/printwx.cc:347
#: n:283
msgid "View"
msgstr "Ansicht"

#. TRANSLATORS: Used as a label for the surrounding box for the "survey
#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
#. "Elements" isn’t a good name for this but nothing better has yet come to
#. mind!
#: ../src/printwx.cc:352
#: n:256
msgid "Elements"
msgstr "Elemente"

#: ../src/printwx.cc:409
#: ../src/printwx.cc:772
#: n:257
#, c-format
msgid "%d pages (%dx%d)"
msgstr "%d Seiten (%dx%d)"

#. TRANSLATORS: used in the scale drop down selector in the print
#. dialog the implicit meaning is "choose a suitable scale to fit
#. the plot on a single page", but we need something shorter
#: ../src/printwx.cc:391
#: ../src/printwx.cc:791
#: n:258
msgid "One page"
msgstr "Eine Seite"

#: ../src/mainfrm.cc:124
#: ../src/printwx.cc:422
#: n:259
msgid "Bearing"
msgstr "Richtung"

#: ../src/printwx.cc:461
#: n:260
msgid "Station Names"
msgstr "Messpunktnamen"

#: ../src/printwx.cc:457
#: n:261
msgid "Crosses"
msgstr "Kreuze"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:447
#: n:262
msgid "Underground Survey Legs"
msgstr "Messstrecken unter Grund"

#: ../src/printwx.cc:477
#: n:393
msgid "Cross-sections"
msgstr "Überschneidungen"

#: ../src/printwx.cc:482
#: n:394
msgid "Walls"
msgstr "Wände"

#: ../src/printwx.cc:486
#: n:395
msgid "Passages"
msgstr "Passagen"

#: ../src/printwx.cc:490
#: n:421
msgid "Origin in centre"
msgstr "Ursprung in der Mitte"

#: ../src/printwx.cc:494
#: n:422
msgid "Full coordinates"
msgstr "Vollständige Koordinaten"

#. TRANSLATORS: Used in the print dialog:
#: ../src/printwx.cc:428
#: n:263
msgid "Tilt angle"
msgstr "Neigung"

#. TRANSLATORS: used in the print dialog - controls drawing lines
#. around each page
#: ../src/printwx.cc:502
#: n:264
msgid "Page Borders"
msgstr "Seitenrahmen"

#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
#. controls drawing the box at the lower left with survey name, view
#. angles, etc
#: ../src/printwx.cc:513
#: n:265
msgid "Legend"
msgstr "Legende"

#. TRANSLATORS: will be used in the print dialog - check this to print
#. blank pages (otherwise they’ll be skipped to save paper)
#: ../src/printwx.cc:508
#: n:266
msgid "Blank Pages"
msgstr "Leerseiten"

#. TRANSLATORS: Items in the "View" menu:
#: ../src/mainfrm.cc:840
#: n:270
msgid "Station &Names\tCtrl+N"
msgstr "Messpunkt&namen\tCtrl+N"

#. TRANSLATORS: Toggles drawing of 3D passages
#: ../src/mainfrm.cc:842
#: n:346
msgid "Passage &Tubes\tCtrl+T"
msgstr "3D-Pa&ssagen\tCtrl+T"

#: ../src/mainfrm.cc:843
#: n:271
msgid "&Crosses\tCtrl+X"
msgstr "Kreu&ze\tCtrl+X"

#: ../src/mainfrm.cc:844
#: n:297
msgid "&Grid\tCtrl+G"
msgstr "&Gitter\tCtrl+G"

#: ../src/mainfrm.cc:845
#: n:318
msgid "&Bounding Box\tCtrl+B"
msgstr "&Begrenzendes Rechteck\tCtrl+B"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:849
#: n:272
msgid "&Underground Survey Legs\tCtrl+L"
msgstr "Messstrecken unter Gr&und\tCtrl+L"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:852
#: n:291
msgid "&Surface Survey Legs\tCtrl+F"
msgstr "Messstrecken an der &Oberfläche\tCtrl+F"

#: ../src/mainfrm.cc:861
#: n:273
msgid "&Overlapping Names"
msgstr "Über&lappende Namen"

#: ../src/gfxcore.cc:3243
#: ../src/mainfrm.cc:862
#: n:292
msgid "Colour by &Depth"
msgstr "Farbe je nach &Tiefe"

#: ../src/gfxcore.cc:3244
#: ../src/mainfrm.cc:863
#: n:293
msgid "Colour by D&ate"
msgstr "Farbe je nach &Datum"

#: ../src/gfxcore.cc:3245
#: ../src/mainfrm.cc:864
#: n:289
msgid "Colour by E&rror"
msgstr "Anhand Fehle&rn einfärben"

#: ../src/mainfrm.cc:866
#: n:294
msgid "Highlight &Entrances"
msgstr "&Eingänge hervorheben"

#: ../src/mainfrm.cc:867
#: n:295
msgid "Highlight &Fixed Points"
msgstr "&Festpunkte hervorheben"

#: ../src/mainfrm.cc:868
#: n:296
msgid "Highlight E&xported Points"
msgstr "E&xportierte Punkte hervorheben"

#: ../src/printwx.cc:465
#: n:418
msgid "Entrances"
msgstr "Eingänge"

#: ../src/printwx.cc:469
#: n:419
msgid "Fixed Points"
msgstr "Festpunkte"

#: ../src/printwx.cc:473
#: n:420
msgid "Exported Stations"
msgstr "Exportierte Punkte"

#: ../src/mainfrm.cc:873
#: n:237
msgid "&Perspective"
msgstr "&Perspektive"

#: ../src/mainfrm.cc:875
#: n:238
msgid "Textured &Walls"
msgstr "&Wandtextur"

#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
#. using that term instead if it gives a better translation which most
#. users will understand.
#: ../src/mainfrm.cc:879
#: n:239
msgid "Fade Distant Ob&jects"
msgstr "Dunsteffe&kt"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/mainfrm.cc:882
#: n:298
msgid "Smoot&hed Survey Legs"
msgstr "Geglättete &Messstrecken"

#: ../src/mainfrm.cc:888
#: ../src/mainfrm.cc:892
#: n:356
msgid "Full Screen &Mode\tF11"
msgstr "&Vollbild-Modus\tF11"

#: ../src/mainfrm.cc:906
#: n:274
msgid "&Compass"
msgstr "&Kompass"

#: ../src/mainfrm.cc:907
#: n:275
msgid "C&linometer"
msgstr "&Neigungsanzeige"

#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/mainfrm.cc:910
#: n:276
msgid "Colour &Key"
msgstr "&Farbschlüssel"

#: ../src/mainfrm.cc:911
#: n:277
msgid "&Scale Bar"
msgstr "&Maßstab"

#: ../src/mainfrm.cc:901
#: n:280
msgid "&Reverse Sense\tCtrl+R"
msgstr "Richtung &umkehren\tCtrl+R"

#: ../src/mainfrm.cc:871
#: ../src/mainfrm.cc:903
#: n:281
msgid "&Cancel Measuring Line\tEscape"
msgstr "Messlinie &abschalten\tEscape"

#: ../src/mainfrm.cc:912
#: n:299
msgid "&Indicators"
msgstr "&Richtungsanzeiger"

#: ../src/z_getopt.c:695
#: ../src/z_getopt.c:707
#: n:300
#, c-format
msgid "%s: option “%s” is ambiguous\n"
msgstr "%s: Die Option »%s« ist nicht eindeutig\n"

#: ../src/z_getopt.c:1023
#: ../src/z_getopt.c:1034
#: n:301
#, c-format
msgid "%s: option “-W %s” is ambiguous\n"
msgstr "%s: Die Option »-W %s« ist nicht eindeutig\n"

#: ../src/z_getopt.c:751
#: ../src/z_getopt.c:755
#: n:302
#, c-format
msgid "%s: option “%c%s” doesn’t allow an argument\n"
msgstr "%s: Die Option »%c%s« erlaubt kein Argument\n"

#: ../src/z_getopt.c:740
#: ../src/z_getopt.c:743
#: n:303
#, c-format
msgid "%s: option “--%s” doesn’t allow an argument\n"
msgstr "%s: Die Option »--%s« erlaubt kein Argument\n"

#: ../src/z_getopt.c:1058
#: ../src/z_getopt.c:1069
#: n:304
#, c-format
msgid "%s: option “-W %s” doesn’t allow an argument\n"
msgstr "%s: Die Option »-W %s« erlaubt kein Argument\n"

#: ../src/z_getopt.c:790
#: ../src/z_getopt.c:802
#: ../src/z_getopt.c:1089
#: ../src/z_getopt.c:1101
#: n:305
#, c-format
msgid "%s: option “%s” requires an argument\n"
msgstr "%s: Die Option »%s« benötigt ein Argument\n"

#: ../src/z_getopt.c:960
#: ../src/z_getopt.c:971
#: ../src/z_getopt.c:1154
#: ../src/z_getopt.c:1166
#: n:306
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: Die Option verlangt ein Argmuent -- %c\n"

#: ../src/z_getopt.c:840
#: ../src/z_getopt.c:843
#: n:307
#, c-format
msgid "%s: unrecognized option “--%s”\n"
msgstr "%s: Unbekannte Option »--%s«\n"

#: ../src/z_getopt.c:851
#: ../src/z_getopt.c:854
#: n:308
#, c-format
msgid "%s: unrecognized option “%c%s”\n"
msgstr "%s: Unbekannte Option »%c%s«\n"

#: ../src/z_getopt.c:901
#: ../src/z_getopt.c:904
#: n:309
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: unzulässige Option -- %c\n"

#: ../src/z_getopt.c:910
#: ../src/z_getopt.c:913
#: n:310
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: ungültige Option -- %c\n"

#: ../src/mainfrm.cc:826
#: n:311
msgid "&New Presentation"
msgstr "&Neue Präsentation"

#: ../src/mainfrm.cc:827
#: n:312
msgid "&Open Presentation…"
msgstr "&Präsentation öffnen…"

#: ../src/mainfrm.cc:828
#: n:313
msgid "&Save Presentation"
msgstr "Präsentation &speichern"

#: ../src/mainfrm.cc:829
#: n:314
msgid "Sa&ve Presentation As…"
msgstr "Präsentation speichern &als…"

#. TRANSLATORS: "Mark" as in "Mark this position"
#: ../src/mainfrm.cc:832
#: n:315
msgid "&Mark"
msgstr "&Markieren"

#. TRANSLATORS: "Play" as in "Play back a recording"
#: ../src/mainfrm.cc:834
#: n:316
msgid "Pla&y"
msgstr "Abspie&len"

#: ../src/mainfrm.cc:835
#: n:317
msgid "&Export as Movie…"
msgstr "&Exportieren als Film…"

#: ../src/mainfrm.cc:2392
#: n:331
msgid "Export Movie"
msgstr "Film exportieren"

#: ../src/mainfrm.cc:333
#: n:319
msgid "Select an output filename"
msgstr "Name der Ausgabedatei wählen"

#: ../src/mainfrm.cc:330
#: ../src/mainfrm.cc:2314
#: n:320
msgid "Aven presentations"
msgstr "Aven Präsentationen"

#. TRANSLATORS: title of the save screenshot dialog
#: ../src/mainfrm.cc:1898
#: n:321
msgid "Save Screenshot"
msgstr "Bildschirmabzug speichern"

#: ../src/mainfrm.cc:2309
#: ../src/mainfrm.cc:2312
#: n:322
msgid "Select a presentation to open"
msgstr "Zu öffnende Präsentation auswählen"

#: ../src/mainfrm.cc:412
#: n:323
#, c-format
msgid "Error in format of presentation file “%s”"
msgstr "Formatfehler in der Präsentationsdatei »%s«"

#. TRANSLATORS: "Compass" as in Larry Fish’s cave
#. surveying package, so probably shouldn’t be translated
#: ../src/mainfrm.cc:1868
#: n:324
msgid "Compass PLT files"
msgstr "Compass PLT Datei"

#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
#. package, so don’t translate it.
#: ../src/mainfrm.cc:1875
#: n:325
msgid "CMAP XYZ files"
msgstr "CAMP XYZ Datei"

#. TRANSLATORS: title of message box
#: ../src/mainfrm.cc:1961
#: ../src/mainfrm.cc:2286
#: ../src/mainfrm.cc:2303
#: n:326
msgid "Modified Presentation"
msgstr "Modifizierte Präsentation"

#. TRANSLATORS: and the question in that box
#: ../src/mainfrm.cc:1959
#: ../src/mainfrm.cc:2285
#: ../src/mainfrm.cc:2302
#: n:327
msgid "The current presentation has been modified.  Abandon unsaved changes?"
msgstr "Die aktuelle Präsentation wurde verändert. Abbrechen, ohne die Änderungen zu speichern?"

#: ../src/mainfrm.cc:2603
#: ../src/mainfrm.cc:2614
#: n:328
msgid "No matches were found."
msgstr "Kein Treffer gefunden."

#~ msgid "Open &Terrain…"
#~ msgstr "Gelände&modell öffnen…"

#~ msgid "Solid Su&rface"
#~ msgstr "&Durchgezogene Oberfläche"

#. TRANSLATORS: number of stations found matching search
#, c-format
#~ msgid "%d found"
#~ msgstr "%d gefunden"

#. TRANSLATORS: "Find stations" button tooltip
#: ../src/mainfrm.cc:989
#: n:332
msgid "Find"
msgstr "Suchen"

#. TRANSLATORS: "Hide stations" button default tooltip
#: ../src/mainfrm.cc:991
#: ../src/mainfrm.cc:2646
#: n:333
msgid "Hide"
msgstr "Verstecken"

#. TRANSLATORS: "Hide stations" button tooltip when stations are found
#: ../src/mainfrm.cc:2607
#: n:334
#, c-format
msgid "Hide %d found stations"
msgstr "%d gefundene(n) Messpunkt(e) verstecken"

#: ../src/mainfrm.cc:213
#: ../src/mainfrm.cc:2044
#: ../src/mainfrm.cc:2127
#: ../src/mainfrm.cc:2180
#: n:335
msgid "Altitude"
msgstr "Höhe"

#. TRANSLATORS: error if you try to drag multiple files to the aven
#. window
#: ../src/mainfrm.cc:690
#: n:336
msgid "You may only view one 3d file at a time."
msgstr "Es kann nur eine 3D-Datei zugleich angezeigt werden."

#: ../src/mainfrm.cc:913
#: n:337
msgid "&Side Panel"
msgstr "&Seitliches Kontrollfeld"

#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
#. Easting)
#: ../src/mainfrm.cc:2042
#: ../src/mainfrm.cc:2064
#: ../src/mainfrm.cc:2066
#: ../src/mainfrm.cc:2179
#: n:338
msgid "%.2f E, %.2f N"
msgstr "%.2f H, %.2f R"

#. TRANSLATORS: Used in Aven:
#. From <stationname>
#. H: 123.45m V: 234.56m
#. Dist: 456.78m  Brg: 200
#: ../src/mainfrm.cc:2085
#: ../src/mainfrm.cc:2137
#: ../src/mainfrm.cc:2200
#: n:339
#, c-format
msgid "From %s"
msgstr "Von %s aus"

#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
#: ../src/mainfrm.cc:2213
#: n:340
#, c-format
msgid "H %.2f%s, V %.2f%s"
msgstr "H %.2f%s, V %.2f%s"

#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
#. in Compass bearing)
#: ../src/mainfrm.cc:2225
#: n:341
#, c-format
msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
msgstr "%s: %s, Dist %.2f%s, Richt. %03d%s"

#. TRANSLATORS: tickable menu item in View menu
#: ../src/gfxcore.cc:3234
#: ../src/gfxcore.cc:3252
#: ../src/mainfrm.cc:915
#: n:342
msgid "&Metric"
msgstr "&Metrisch"

#. TRANSLATORS: tickable menu item in View menu.
#.
#. Degrees are the angular measurement where there are 360 in a full
#. circle.
#: ../src/gfxcore.cc:3199
#: ../src/gfxcore.cc:3217
#: ../src/mainfrm.cc:916
#: n:343
msgid "&Degrees"
msgstr "&Grad"

#. TRANSLATORS: tickable menu item in View menu.
#.
#. Show the tilt of the survey as a percentage gradient (100% = 45
#. degrees = 50 grad).
#: ../src/gfxcore.cc:3222
#: ../src/mainfrm.cc:917
#: n:430
msgid "&Percent"
msgstr "&Prozentual"

#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
#. used e.g.  "5km".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1135
#: ../src/printwx.cc:1081
#: n:423
msgid "km"
msgstr "km"

#. TRANSLATORS: abbreviation for "metres" (unit of length), used
#. e.g. "10m".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1009
#: ../src/gfxcore.cc:1142
#: ../src/mainfrm.cc:2033
#: ../src/mainfrm.cc:2102
#: ../src/mainfrm.cc:2122
#: ../src/mainfrm.cc:2172
#: ../src/mainfrm.cc:2204
#: ../src/printwx.cc:1083
#: n:424
msgid "m"
msgstr "m"

#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
#. used e.g.  "50cm".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1150
#: ../src/printwx.cc:1086
#: n:425
msgid "cm"
msgstr "cm"

#. TRANSLATORS: abbreviation for "miles" (unit of length,
#. plural), used e.g.  "2 miles".
#.
#. If there should be a space between the number and this,
#. include one in the translation.
#: ../src/gfxcore.cc:1163
#: n:426
msgid " miles"
msgstr " Meilen"

#. TRANSLATORS: abbreviation for "mile" (unit of length,
#. singular), used e.g.  "1 mile".
#.
#. If there should be a space between the number and this,
#. include one in the translation.
#: ../src/gfxcore.cc:1170
#: n:427
msgid " mile"
msgstr " Meile"

#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
#. as "10ft".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1009
#: ../src/gfxcore.cc:1178
#: ../src/mainfrm.cc:2038
#: ../src/mainfrm.cc:2105
#: ../src/mainfrm.cc:2125
#: ../src/mainfrm.cc:2177
#: ../src/mainfrm.cc:2209
#: n:428
msgid "ft"
msgstr "ft"

#. TRANSLATORS: abbreviation for "inches" (unit of length), used
#. e.g. as "6in".
#.
#. If there should be a space between the number and this, include
#. one in the translation.
#: ../src/gfxcore.cc:1186
#: n:429
msgid "in"
msgstr "in"

#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
#: ../src/gfxcore.cc:3197
#: n:387
msgid "&Hide Compass"
msgstr "&Kompass verstecken"

#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
#: ../src/gfxcore.cc:3212
#: n:384
msgid "&Hide Clino"
msgstr "&Clino verstecken"

#. TRANSLATORS: Menu item which turns off the scale bar in aven.
#: ../src/gfxcore.cc:3232
#: n:385
msgid "&Hide scale bar"
msgstr "Maßstab &verstecken"

#. TRANSLATORS: Menu item which turns off the colour key.
#. The "Colour Key" is the thing in aven showing which colour
#. corresponds to which depth, date, survey closure error, etc.
#: ../src/gfxcore.cc:3250
#: n:386
msgid "&Hide colour key"
msgstr "Farbsc&hlüssel verstecken"

#. TRANSLATORS: degree symbol - probably should be translated to
#. itself.
#: ../src/gfxcore.cc:684
#: ../src/gfxcore.cc:759
#: ../src/mainfrm.cc:2089
#: ../src/mainfrm.cc:2217
#: ../src/printwx.cc:972
#: ../src/printwx.cc:1000
#: ../src/printwx.cc:1004
#: ../src/printwx.cc:1008
#: ../src/printwx.cc:1018
#: n:344
msgid "°"
msgstr "°"

#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
#. circle).
#: ../src/gfxcore.cc:689
#: ../src/gfxcore.cc:764
#: n:76
msgid "ᵍ"
msgstr "ᵍ"

#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
#. full circle).  Try to make this as short as sensibly possible.
#.
#. E.g. in Italian and Spanish we use "g.cent." rather than
#. "gradi quattrocentesimali"/"grados centesimales"
#: ../src/mainfrm.cc:2097
#: ../src/mainfrm.cc:2220
#: n:345
msgid "grad"
msgstr "Neugrad"

#. TRANSLATORS: symbol for percentage gradient (100% = 45 degrees =
#. 50 grad).
#: ../src/gfxcore.cc:750
#: ../src/gfxcore.cc:768
#: n:96
msgid "%"
msgstr "%"

#. TRANSLATORS: used for the percentage gradient on vertical
#. angles.
#: ../src/gfxcore.cc:744
#: n:431
msgid "∞"
msgstr "∞"

#: ../src/mainfrm.cc:896
#: n:347
#~ msgid "&Preferences…"
#~ msgstr "&Einstellungen…"

#: n:348
#~ msgid "Draw passage walls"
#~ msgstr "Wände einzeichnen"

#: n:349
#~ msgid "Estimate LRUD readings based on heuristics"
#~ msgstr "LROU-Werte heuristisch schätzen"

#: n:350
#~ msgid "Mark survey stations with crosses"
#~ msgstr "Messpunkte durch Kreuze markieren"

#: n:351
#~ msgid "Highlight stations marked as entrances"
#~ msgstr "Messpunkte an den Eingängen hervorheben"

#: n:352
#~ msgid "Highlight stations marked as fixed points"
#~ msgstr "Feste Messpunkte hervorheben"

#: n:353
#~ msgid "Highlight stations which are exported"
#~ msgstr "Exportierte Messpunkte hervorheben"

#: n:354
#~ msgid "Mark survey stations with their names"
#~ msgstr "Messpunkte mit ihren Namen beschriften"

#: n:355
#~ msgid "Allow names to overlap on the display (faster)"
#~ msgstr "Überlappende Beschriftungen zulassen (schneller)"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:357
#~ msgid "Display underground survey legs"
#~ msgstr "Messstrecken unter Grund anzeigen"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: n:358
#~ msgid "Display surface survey legs"
#~ msgstr "Messstrecken an der Oberfläche anzeigen"

#: n:359
#~ msgid "Colour surface surveys by depth"
#~ msgstr "Oberflächenvermessung nach Höhe einfärben"

#: n:360
#~ msgid "Draw surface legs with dashed lines"
#~ msgstr "Oberflächenstrecken gestrichelt zeichnen"

#: n:361
#~ msgid "Draw a grid"
#~ msgstr "Gitter einzeichnen"

#: n:362
#~ msgid "metric units"
#~ msgstr "Meter"

#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
#. the USA (rather confusingly now that England has largely gone metric!)
#: n:363
#~ msgid "imperial units"
#~ msgstr "englische Einheiten"

#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
#. full circle.
#: n:364
#~ msgid "degrees (°)"
#~ msgstr "Altgrad (°)"

#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
#. full circle.
#: n:365
#~ msgid "grads"
#~ msgstr "Neugrad (gon)"

#: n:366
#~ msgid "Display measurements in"
#~ msgstr "Längen anzeigen in"

#: n:367
#~ msgid "Display angles in"
#~ msgstr "Winkel anzeigen in"

#. TRANSLATORS: reverses the sense of the mouse controls
#: n:368
#~ msgid "Reverse the sense of the controls"
#~ msgstr "Maus-Steuerung umkehren"

#: n:369
#~ msgid "Display scale bar"
#~ msgstr "Maßstab anzeigen"

#: n:370
#~ msgid "Display depth bar"
#~ msgstr "Tiefenskala anzeigen"

#: n:371
#~ msgid "Display compass"
#~ msgstr "Kompass anzeigen"

#: n:372
#~ msgid "Display clinometer"
#~ msgstr "Neigungsmesser anzeigen"

#: n:373
#~ msgid "Display side panel"
#~ msgstr "Seitliches Kontrollfeld anzeigen"

#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
#. in Compass bearing)
#: ../src/mainfrm.cc:2109
#: n:374
#, c-format
msgid "%s: H %.2f%s, Brg %03d%s"
msgstr "%s: H %.2f%s, Richt. %03d%s"

#. TRANSLATORS: "V" is short for "Vertical"
#: ../src/mainfrm.cc:2143
#: n:375
#, c-format
msgid "%s: V %.2f%s"
msgstr "%s: V %.2f%s"

#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
#. tree hierarchy of survey station names
#: ../src/mainfrm.cc:1044
#: n:376
msgid "Surveys"
msgstr "Vermessungen"

#: ../src/mainfrm.cc:1045
#: n:377
msgid "Presentation"
msgstr "Präsentation"

#: ../src/mainfrm.cc:211
#: n:378
msgid "Easting"
msgstr "Rechtswert"

#: ../src/mainfrm.cc:212
#: n:379
msgid "Northing"
msgstr "Hochwert"

#: ../src/mainfrm.cc:761
#: n:380
msgid "&Print…\tCtrl+P"
msgstr "&Drucken…\tCtrl+P"

#: ../src/mainfrm.cc:762
#: n:381
msgid "P&age Setup…"
msgstr "&Seite einrichten…"

#: ../src/mainfrm.cc:766
#: n:382
msgid "&Export as…"
msgstr "&Exportieren als…"

#. TRANSLATORS: Title of file dialog to choose name and type of exported
#. file.
#: ../src/printwx.cc:604
#: n:401
msgid "Export as:"
msgstr "Exportieren als:"

#. TRANSLATORS: Title of the export
#. dialog
#: ../src/printwx.cc:294
#: n:383
msgid "Export"
msgstr "Exportieren"

#. TRANSLATORS: for about box:
#: ../src/aboutdlg.cc:142
#: n:390
msgid "System Information:"
msgstr "Systeminformation:"

#. TRANSLATORS: Title of the print preview dialog
#: ../src/printwx.cc:644
#: n:398
msgid "Print Preview"
msgstr "Druckvorschau"

#. TRANSLATORS: Title of the print
#. dialog
#: ../src/printwx.cc:291
#: n:399
msgid "Print"
msgstr "Drucken"

#: ../src/printwx.cc:551
#: n:400
msgid "&Print…"
msgstr "&Drucken…"

#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
#. "survey stations".
#: ../src/printwx.cc:453
#: n:403
msgid "Sur&face Survey Legs"
msgstr "Messstrecken an der Ober&fläche"

#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
#: ../src/mainfrm.cc:97
#: n:404
msgid "Edit Waypoint"
msgstr "Wegpunkt bearbeiten"

#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
#. in a presentation.
#: ../src/mainfrm.cc:136
#: n:278
msgid " (unused in perspective view)"
msgstr " (in Ansicht »Perspektive« ungenutzt)"

#. TRANSLATORS: Field label in dialog to edit a waypoint in a
#. presentation.
#: ../src/mainfrm.cc:143
#: n:279
msgid "Time: "
msgstr "Zeit: "

#. TRANSLATORS: units+info after time field in dialog to edit a
#. waypoint in a presentation.
#: ../src/mainfrm.cc:147
#: n:282
msgid " secs (0 = auto; *6 = 6 times auto)"
msgstr " Sekunden (0 = auto; *6 = 6 mal auto)"

#. TRANSLATORS: %s will be replaced with "Aven" currently (and
#. perhaps by "Survex" or other things in future).
#: ../src/aven.cc:230
#: n:405
#, c-format
msgid "This version of %s requires OpenGL to work, but it isn’t available."
msgstr "Diese Version von %s benötigt zum Funktionieren OpenGL, was jedoch nicht verfügbar ist."

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:159
#: n:500
#, c-format
msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
msgstr "Verschoben um (%3.2f,%3.2f,%3.2f): %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:196
#: n:501
#, c-format
msgid "Added: %s"
msgstr "Hinzugefügt: %s"

#. TRANSLATORS: for diffpos:
#: ../src/diffpos.c:219
#: n:502
#, c-format
msgid "Deleted: %s"
msgstr "Entfernt: %s"

#. TRANSLATORS: for extend: the user specified breaking a loop or
#. changing extend direction at this station, but we didn’t find it in
#. the 3d file
#: ../src/extend.c:262
#: ../src/extend.c:280
#: ../src/extend.c:325
#: ../src/extend.c:367
#: ../src/extend.c:409
#: n:510
#, c-format
msgid "Failed to find station %s"
msgstr "Messpunkt konnte nicht gefunden werden: %s"

#. TRANSLATORS: for extend: the user specified breaking a loop or
#. changing extend direction at this leg, but we didn’t find it in the
#. 3d file
#: ../src/extend.c:306
#: ../src/extend.c:348
#: ../src/extend.c:390
#: ../src/extend.c:432
#: n:511
#, c-format
msgid "Failed to find leg %s → %s"
msgstr "Messstrecke konnte nicht gefunden werden: %s → %s"

#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
#: ../src/extend.c:253
#: n:512
#, c-format
msgid "Starting from station %s"
msgstr "Bei diesem Messpunkt wird begonnen: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:273
#: n:513
#, c-format
msgid "Extending to the left from station %s"
msgstr "Von diesem Messpunkt aus nach links erweitern: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:318
#: n:514
#, c-format
msgid "Extending to the right from station %s"
msgstr "Von diesem Messpunkt aus nach rechts erweitern: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:293
#: n:515
#, c-format
msgid "Extending to the left from leg %s → %s"
msgstr "Von dieser Messstrecke aus nach links erweitern: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:338
#: n:516
#, c-format
msgid "Extending to the right from leg %s → %s"
msgstr "Von dieser Messstrecke aus nach rechts erweitern: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:402
#: n:517
#, c-format
msgid "Breaking survey loop at station %s"
msgstr "Messschleife wird an diesem Messpunkt unterbrochen: %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:422
#: n:518
#, c-format
msgid "Breaking survey loop at leg %s → %s"
msgstr "Messschleife wird an dieser Messstrecke unterbrochen: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:360
#: n:519
#, c-format
msgid "Swapping extend direction from station %s"
msgstr "Erweiterungsrichtung von Messpunkt %s wird umgekehrt"

#. TRANSLATORS: for extend:
#: ../src/extend.c:380
#: n:520
#, c-format
msgid "Swapping extend direction from leg %s → %s"
msgstr "Erweiterungsrichtung von Messstrecke wird umgekehrt: %s → %s"

#. TRANSLATORS: for extend:
#: ../src/extend.c:550
#: n:521
#, c-format
msgid "Applying specfile: “%s”"
msgstr "Spezifikationsdatei wird angewendet: »%s«"

#. TRANSLATORS: for extend:
#. Used to tell the user that a file is being written - %s is the filename
#: ../src/extend.c:613
#: n:522
#, c-format
msgid "Writing %s…"
msgstr "%s wird geschrieben…"

#: ../src/findentrances.cc:100
#: ../src/gpx.cc:70
#: n:287
#, c-format
msgid "Failed to initialise input coordinate system “%s”"
msgstr "Initialisierung des Eingabekoordinatensystems »%s« ist gescheitert"

#: ../src/findentrances.cc:103
#: ../src/gpx.cc:76
#: n:288
#, c-format
msgid "Failed to initialise output coordinate system “%s”"
msgstr "Initialisierung des Ausgabekoordinatensystems »%s« ist gescheitert"

#: ../src/findentrances.cc:155
#: n:388
msgid "-d PROJ_DATUM 3D_FILE"
msgstr "-d PROJ-DATUM 3D-DATEI"

#. TRANSLATORS: The PROJ library is used to do coordinate transformations
#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
#. what the input datum is.
#: ../src/findentrances.cc:146
#: ../src/printwx.cc:529
#: n:389
msgid "input datum as string to pass to PROJ"
msgstr "Eingabedatum als Zeichenkette zur Übergabe an PROJ"

#: ../src/readval.c:339
#: n:392
msgid "Separator in survey name"
msgstr "Trennzeichen im Vermessungsnamen"

#: ../src/readval.c:124
#: ../src/readval.c:139
#: ../src/readval.c:156
#: n:3
msgid "Can't have a leg between two anonymous stations"
msgstr "Zwischen zwei anonymen Messpunkten kann keine Messstrecke sein"

#: ../src/dump3d.c:52
#: n:396
msgid "show survey date information (if present)"
msgstr "Datumsangaben einer Vermessung zeigen (wenn vorhanden)"

#: ../src/mainfrm.cc:858
#: n:406
msgid "Spla&y Legs"
msgstr "Messstrecken spre&izen"

#: ../src/mainfrm.cc:855
#: n:407
msgid "&Hide"
msgstr "&Verstecken"

#: ../src/mainfrm.cc:856
#: n:408
msgid "&Fade"
msgstr "Dunsteffe&kt"

#: ../src/mainfrm.cc:857
#: n:409
msgid "&Show"
msgstr "&Zeigen"

#: ../src/printwx.cc:360
#: n:410
msgid "Export format"
msgstr "Exportformat"