source: git/lib/bg.po @ 5f69a50

RELEASE/1.2debug-cidebug-ci-sanitisersstereowalls-data
Last change on this file since 5f69a50 was 5f69a50, checked in by Olly Betts <olly@…>, 9 years ago

lib/: Update source references.

  • Property mode set to 100644
File size: 71.0 KB
Line 
1msgid ""
2msgstr ""
3"Project-Id-Version: survex\n"
4"Report-Msgid-Bugs-To: olly@survex.com\n"
5"POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6"PO-Revision-Date: 2014-01-18 21:36:34 +0000\n"
7"Last-Translator: Olly Betts <olly@survex.com>\n"
8"Language-Team: \n"
9"MIME-Version: 1.0\n"
10"Content-Type: text/plain; charset=utf-8\n"
11"Content-Transfer-Encoding: 8bit\n"
12"Language: bg\n"
13
14#. TRANSLATORS: Aven menu titles.  An “&” goes before the letter of any
15#. accelerator key.  The accelerators must be different within this group
16#: ../src/mainfrm.cc:985
17#: n:210
18msgid "&File"
19msgstr "&Файл"
20
21#: ../src/mainfrm.cc:986
22#: n:211
23msgid "&Rotation"
24msgstr "&авъртане"
25
26#: ../src/mainfrm.cc:987
27#: n:212
28msgid "&Orientation"
29msgstr "&Ориентация"
30
31#: ../src/mainfrm.cc:988
32#: n:213
33msgid "&View"
34msgstr "&Изглед"
35
36#: ../src/mainfrm.cc:990
37#: n:214
38#, fuzzy
39msgid "&Controls"
40msgstr "&Контрол"
41
42#: ../src/mainfrm.cc:999
43#: n:215
44msgid "&Help"
45msgstr "По&мощ"
46
47#: ../src/mainfrm.cc:992
48#: n:216
49msgid "&Presentation"
50msgstr "&Презентация"
51
52#. TRANSLATORS: as in: Usage: cavern …
53#: ../src/cmdline.c:168
54#: n:49
55msgid "Usage"
56msgstr ""
57
58#. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
59#. was trying to allocate space for.
60#: ../src/message.c:85
61#: n:1
62#, c-format
63msgid "Out of memory (couldn’t find %lu bytes)."
64msgstr ""
65
66#. TRANSLATORS: %s will be replaced by the filename that we were trying
67#. to read when we ran out of memory.
68#: ../src/img_hosted.c:34
69#: n:38
70#, c-format
71msgid "Out of memory trying to read file “%s”"
72msgstr ""
73
74#. TRANSLATORS: Feel free to translate as "or newer" instead of "or
75#. greater" if that gives a more natural translation.  It's
76#. technically not quite right when there are parallel active release
77#. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
78#. seems unlikely to confuse users.  "Survex" is the name of the
79#. software, so should not be translated.
80#.
81#. Here "survey" is a "cave map" rather than list of questions - it should be
82#. translated to the terminology that cavers using the language would use.
83#: ../src/commands.c:2059
84#: n:2
85#, c-format
86msgid "Survex version %s or greater required to process this survey data."
87msgstr ""
88
89#. TRANSLATORS: Indicates a warning message e.g.:
90#. "spoon.svx:12: warning: *prefix is deprecated"
91#: ../src/aven.cc:397
92#: ../src/cavernlog.cc:245
93#: ../src/message.c:1272
94#: n:4
95msgid "warning"
96msgstr "внимание"
97
98#. TRANSLATORS: Indicates an error message e.g.:
99#. "spoon.svx:13:4: error: Field may not be omitted"
100#: ../src/cavernlog.cc:244
101#: ../src/message.c:1276
102#: n:93
103msgid "error"
104msgstr "грешка"
105
106#. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
107#. by the line number in that file.  Your translation should also contain
108#. %s:%u so that automatic parsing of error messages to determine the file
109#. and line number still works.
110#: ../src/datain.c:109
111#: n:5
112#, c-format
113msgid "In file included from %s:%u:\n"
114msgstr ""
115
116#. TRANSLATORS: If you're unsure what "deprecated" means, see:
117#. http://en.wikipedia.org/wiki/Deprecation
118#: ../src/commands.c:589
119#: n:6
120msgid "*prefix is deprecated - use *begin and *end instead"
121msgstr ""
122
123#. TRANSLATORS: Here "station" is a survey station, not a train station.
124#: ../src/readval.c:206
125#: n:7
126#, c-format
127msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
128msgstr ""
129
130#: ../src/readval.c:387
131#: n:8
132msgid "Field may not be omitted"
133msgstr ""
134
135#: ../src/datain.c:1553
136#: ../src/datain.c:1839
137#: ../src/readval.c:389
138#: ../src/readval.c:430
139#: ../src/readval.c:460
140#: n:9
141#, c-format
142msgid "Expecting numeric field, found “%s”"
143msgstr ""
144
145#: ../src/commands.c:1657
146#: n:10
147#, c-format
148msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
149msgstr ""
150
151#: ../src/debug.h:45
152#: ../src/debug.h:47
153#: ../src/matrix.c:352
154#: ../src/message.c:238
155#: n:11
156msgid "Bug in program detected! Please report this to the authors"
157msgstr ""
158
159#: ../src/commands.c:2174
160#: ../src/extend.c:436
161#: n:12
162#, c-format
163msgid "Unknown command “%s”"
164msgstr ""
165
166#. TRANSLATORS: Here "station" is a survey station, not a train station.
167#: ../src/netbits.c:449
168#: n:13
169#, c-format
170msgid "Station “%s” equated to itself"
171msgstr ""
172
173#. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
174#. survey stations.
175#: ../src/datain.c:1073
176#: n:14
177msgid "Compass reading may not be omitted except on plumbed legs"
178msgstr ""
179
180#: ../src/datain.c:284
181#: ../src/extend.c:441
182#: n:15
183msgid "End of line not blank"
184msgstr ""
185
186#: ../src/cavern.c:393
187#: n:16
188#, c-format
189msgid "There were %d warning(s)."
190msgstr ""
191
192#. TRANSLATORS: %s is replaced by the command we attempted to run.
193#: ../src/cavernlog.cc:176
194#: ../src/cavernlog.cc:236
195#: n:17
196#, c-format
197msgid "Couldn’t run external command: “%s”"
198msgstr ""
199
200#: ../src/datain.c:80
201#: ../src/datain.c:88
202#: ../src/datain.c:95
203#: ../src/datain.c:770
204#: ../src/extend.c:559
205#: ../src/sorterr.c:80
206#: ../src/sorterr.c:97
207#: ../src/sorterr.c:240
208#: n:18
209msgid "Error reading file"
210msgstr "Грешка при четене на файл"
211
212#: ../src/message.c:1292
213#: n:19
214msgid "Too many errors - giving up"
215msgstr ""
216
217#. TRANSLATORS: If you're unsure what "deprecated" means, see:
218#. http://en.wikipedia.org/wiki/Deprecation
219#: ../src/commands.c:1536
220#: n:20
221msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
222msgstr ""
223
224#. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
225#. (a weight on a string).  So the problem here is that the leg is
226#. vertical, so a compass reading has no meaning!
227#: ../src/datain.c:1044
228#: n:21
229msgid "Compass reading given on plumbed leg"
230msgstr ""
231
232#: ../src/commands.c:677
233#: n:22
234msgid "END with no matching BEGIN in this file"
235msgstr ""
236
237#: ../src/datain.c:757
238#: n:23
239msgid "BEGIN with no matching END in this file"
240msgstr ""
241
242#. TRANSLATORS: A station must be exported out of each level it is in, so
243#. this would give "Station “\outer.inner.1” not exported from survey
244#. “\outer”)":
245#.
246#. *equate entrance outer.inner.1
247#. *begin outer
248#. *begin inner
249#. *export 1
250#. 1 2 1.23 045 -6
251#. *end inner
252#. *end outer
253#.
254#. Here "survey" is a "cave map" rather than list of questions - it should be
255#. translated to the terminology that cavers using the language would use.
256#: ../src/commands.c:993
257#: ../src/commands.c:995
258#: ../src/listpos.c:104
259#: ../src/readval.c:328
260#: ../src/readval.c:331
261#: n:26
262#, c-format
263msgid "Station “%s” not exported from survey “%s”"
264msgstr ""
265
266#. TRANSLATORS: This error occurs if there's an attempt to
267#. export a station from a survey which doesn't actually exist.
268#.
269#. Here "survey" is a "cave map" rather than list of questions - it should be
270#. translated to the terminology that cavers using the language would use.
271#: ../src/listpos.c:112
272#: n:286
273#, c-format
274msgid "Reference to station “%s” from non-existent survey “%s”"
275msgstr ""
276
277#. TRANSLATORS: Here "station" is a survey station, not a train station.
278#.
279#. Here "survey" is a "cave map" rather than list of questions - it should be
280#. translated to the terminology that cavers using the language would use.
281#: ../src/readval.c:302
282#: n:27
283#, c-format
284msgid "“%s” can’t be both a station and a survey"
285msgstr ""
286
287#. TRANSLATORS: Here "station" is a survey station, not a train station.
288#: ../src/extend.c:248
289#: ../src/extend.c:267
290#: ../src/extend.c:312
291#: ../src/extend.c:354
292#: ../src/extend.c:396
293#: ../src/readval.c:202
294#: n:28
295msgid "Expecting station name"
296msgstr ""
297
298#: ../src/commands.c:1985
299#: n:31
300#, c-format
301msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
302msgstr ""
303
304#: ../src/commands.c:1992
305#: n:32
306#, c-format
307msgid "Found “%s”, expecting “ON” or “OFF”"
308msgstr ""
309
310#. TRANSLATORS: EQUATE is a command name, so shouldn’t be
311#. translated.
312#.
313#. Here "station" is a survey station, not a train station.
314#: ../src/commands.c:953
315#: n:33
316msgid "Only one station in EQUATE command"
317msgstr ""
318
319#. TRANSLATORS: A "quantity" is something measured like "LENGTH",
320#. "BEARING", "ALTITUDE", etc.
321#: ../src/commands.c:439
322#: n:34
323#, c-format
324msgid "Unknown quantity “%s”"
325msgstr ""
326
327#: ../src/commands.c:354
328#: n:35
329#, c-format
330msgid "Unknown units “%s”"
331msgstr ""
332
333#: ../src/commands.c:1825
334#: ../src/commands.c:1900
335#: n:434
336msgid "Unknown coordinate system"
337msgstr ""
338
339#: ../src/commands.c:1920
340#: ../src/commands.c:1945
341#: n:443
342#, c-format
343msgid "Invalid coordinate system: %s"
344msgstr ""
345
346#: ../src/commands.c:1907
347#: ../src/commands.c:1925
348#: n:435
349msgid "Coordinate system unsuitable for output"
350msgstr ""
351
352#: ../src/commands.c:853
353#: n:436
354msgid "Failed to convert coordinates"
355msgstr ""
356
357#: ../src/commands.c:858
358#: n:437
359msgid "The input projection is set but the output projection isn't"
360msgstr ""
361
362#: ../src/commands.c:860
363#: n:438
364msgid "The output projection is set but the input projection isn't"
365msgstr ""
366
367#: ../src/commands.c:760
368#: n:439
369msgid "Coordinates can't be omitted when coordinate system has been specified"
370msgstr ""
371
372#. TRANSLATORS: Used when a BEGIN command has no survey, but the
373#. END command does, e.g.:
374#.
375#. *begin
376#. 1 2 10.00 178 -01
377#. *end entrance      <--[Message given here]
378#: ../src/commands.c:699
379#: n:36
380msgid "Matching BEGIN command has no survey name"
381msgstr ""
382
383#. TRANSLATORS: Note: In English you talk about the *units* of a single
384#. measurement, but the correct term in other languages may be singular.
385#: ../src/commands.c:367
386#: n:37
387#, c-format
388msgid "Invalid units “%s” for quantity"
389msgstr ""
390
391#: ../src/commands.c:430
392#: n:39
393#, c-format
394msgid "Unknown instrument “%s”"
395msgstr ""
396
397#. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
398#. translate
399#: ../src/commands.c:1504
400#: n:40
401msgid "Scale factor must be 1.0 for DECLINATION"
402msgstr ""
403
404#. TRANSLATORS: If the scale factor for an instrument is zero, then any
405#. reading would be mapped to zero, which doesn't make sense.
406#: ../src/commands.c:1510
407#: n:391
408msgid "Scale factor must be non-zero"
409msgstr ""
410
411#: ../src/commands.c:1555
412#: n:41
413#, c-format
414msgid "Unknown setting “%s”"
415msgstr ""
416
417#: ../src/commands.c:477
418#: n:42
419#, c-format
420msgid "Unknown character class “%s”"
421msgstr ""
422
423#: ../src/extend.c:605
424#: ../src/netskel.c:90
425#: n:43
426msgid "No survey data"
427msgstr ""
428
429#: ../src/filename.c:52
430#: ../src/img_hosted.c:35
431#: n:44
432#, c-format
433msgid "Filename “%s” refers to directory"
434msgstr ""
435
436#. TRANSLATORS: At the end of processing (or if a *SOLVE command is used)
437#. cavern will issue this error if there are any sections of the survey
438#. network which are hanging.
439#: ../src/netartic.c:387
440#: n:45
441msgid "Survey not all connected to fixed stations"
442msgstr ""
443
444#: ../src/commands.c:883
445#: ../src/datain.c:682
446#: n:46
447msgid "Station already fixed or equated to a fixed point"
448msgstr ""
449
450#: ../src/cavern.c:298
451#: ../src/filename.c:55
452#: ../src/img_hosted.c:36
453#: n:47
454#, c-format
455msgid "Failed to open output file “%s”"
456msgstr ""
457
458#: ../src/commands.c:1610
459#: n:48
460msgid "Standard deviation must be positive"
461msgstr ""
462
463#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
464#. "survey stations".
465#.
466#. %s is replaced by the name of the station.
467#: ../src/netbits.c:346
468#: n:50
469#, c-format
470msgid "Survey leg with same station (“%s”) at both ends - typing error?"
471msgstr ""
472
473#. TRANSLATORS: %.f%s will be replaced with a right angle in the
474#. units currently in use, e.g. "90°" or "100ᵍ".  And "absolute
475#. value" means the reading ignoring the sign (so it might be
476#. < -90° or > 90°.
477#: ../src/datain.c:979
478#: ../src/datain.c:992
479#: ../src/datain.c:1010
480#: n:51
481#, c-format
482msgid "Clino reading over %.f%s (absolute value)"
483msgstr ""
484
485#: ../src/netbits.c:464
486#: n:52
487#, c-format
488msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
489msgstr ""
490
491#. TRANSLATORS: "equal" as in:
492#.
493#. *fix a 1 2 3
494#. *fix b 1 2 3
495#. *equate a b
496#: ../src/netbits.c:475
497#: n:53
498#, c-format
499msgid "Equating two equal fixed points: “%s” and “%s”"
500msgstr ""
501
502#. TRANSLATORS: " *fix a " gives this message:
503#: ../src/commands.c:770
504#: n:54
505msgid "FIX command with no coordinates - fixing at (0,0,0)"
506msgstr ""
507
508#. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
509#: ../src/commands.c:887
510#: ../src/datain.c:684
511#: n:55
512msgid "Station already fixed at the same coordinates"
513msgstr ""
514
515#. TRANSLATORS: Emitted after second and subsequent "FIX command with
516#. no coordinates - fixing at (0,0,0)" warnings.
517#: ../src/commands.c:778
518#: n:441
519#, c-format
520msgid "Already had FIX command with no coordinates for station “%s”"
521msgstr ""
522
523#: ../src/commands.c:1710
524#: n:442
525#, c-format
526msgid "Station “%s” fixed before CS command first used"
527msgstr ""
528
529#. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
530#. <SURVEY>, so this would generate this error:
531#.
532#. *begin fred
533#. 1 2 1.23 045 -6
534#. *export 2
535#. *end fred
536#: ../src/commands.c:2188
537#: n:57
538msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
539msgstr ""
540
541#: ../src/readval.c:516
542#: n:58
543msgid "Invalid year (< 1900 or > 2078)"
544msgstr ""
545
546#. TRANSLATORS: Suspicious means something like 410 degrees or -20
547#. degrees
548#: ../src/datain.c:871
549#: ../src/datain.c:880
550#: n:59
551msgid "Suspicious compass reading"
552msgstr ""
553
554#: ../src/datain.c:1529
555#: n:60
556msgid "Negative tape reading"
557msgstr ""
558
559#: ../src/commands.c:765
560#: n:61
561msgid "Same station fixed twice with no coordinates"
562msgstr ""
563
564#. TRANSLATORS: This means that the data fed in said this.
565#.
566#. It could be a gross error (e.g. the decimal point is missing from the
567#. depth gauge reading) or it could just be due to random error on a near
568#. vertical leg
569#: ../src/datain.c:1228
570#: n:62
571msgid "Tape reading is less than change in depth"
572msgstr ""
573
574#. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
575#. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
576#. neither style nor reading is a keyword in the program This error
577#. complains about a depth gauge reading in normal style, for example
578#: ../src/commands.c:1214
579#: n:63
580#, c-format
581msgid "Reading “%s” not allowed in data style “%s”"
582msgstr ""
583
584#. TRANSLATORS: i.e. not enough readings for the style.
585#: ../src/commands.c:1404
586#: n:64
587#, c-format
588msgid "Too few readings for data style “%s”"
589msgstr ""
590
591#. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
592#: ../src/commands.c:1174
593#: n:65
594#, c-format
595msgid "Data style “%s” unknown"
596msgstr ""
597
598#. TRANSLATORS: Here "station" is a survey station, not a train station.
599#.
600#. Exporting a station twice gives this error:
601#.
602#. *begin example
603#. *export 1
604#. *export 1
605#. 1 2 1.24 045 -6
606#. *end example
607#: ../src/commands.c:1044
608#: n:66
609#, c-format
610msgid "Station “%s” already exported"
611msgstr ""
612
613#. TRANSLATORS: complains about a situation like trying to define
614#. two from stations per leg
615#: ../src/commands.c:1240
616#: n:67
617#, c-format
618msgid "Duplicate reading “%s”"
619msgstr ""
620
621#: ../src/commands.c:914
622#: n:68
623#, c-format
624msgid "FLAG “%s” unknown"
625msgstr ""
626
627#: ../src/readval.c:474
628#: n:69
629msgid "Missing \""
630msgstr "Липсва \""
631
632#. TRANSLATORS: Here "station" is a survey station, not a train station.
633#: ../src/listpos.c:122
634#: n:70
635#, c-format
636msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
637msgstr ""
638
639#. TRANSLATORS: Here "station" is a survey station, not a train
640#. station.
641#: ../src/netartic.c:399
642#: n:71
643msgid "The following survey stations are not attached to a fixed point:"
644msgstr ""
645
646#: ../src/netskel.c:135
647#: n:72
648#, c-format
649msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
650msgstr ""
651
652#. TRANSLATORS: fixed survey station that is not part of any survey
653#: ../src/netskel.c:958
654#: n:73
655#, c-format
656msgid "Unused fixed point “%s”"
657msgstr ""
658
659#: ../src/matrix.c:123
660#: n:74
661msgid "Network solved by reduction - no simultaneous equations to solve."
662msgstr ""
663
664#: ../src/matrix.c:134
665#: n:75
666#, c-format
667msgid "Solving %d simultaneous equations"
668msgstr ""
669
670#. TRANSLATORS: This is an error from the *DATA command.  It
671#. means that a reading (which will appear where %s is isn't
672#. valid as the list of readings has already included the same
673#. reading, or an equivalent one (e.g. you can't have both
674#. DEPTH and DEPTHCHANGE together).
675#: ../src/commands.c:1307
676#: n:77
677#, c-format
678msgid "Reading “%s” duplicates previous reading(s)"
679msgstr ""
680
681#: ../src/matrix.c:132
682#: n:78
683msgid "Solving one equation"
684msgstr ""
685
686#: ../src/datain.c:945
687#: ../src/datain.c:1217
688#: ../src/datain.c:1410
689#: n:79
690msgid "Negative adjusted tape reading"
691msgstr ""
692
693#: ../src/commands.c:2096
694#: ../src/commands.c:2116
695#: n:80
696msgid "Date is in the future!"
697msgstr ""
698
699#: ../src/commands.c:2120
700#: n:81
701msgid "End of date range is before the start"
702msgstr ""
703
704#. TRANSLATORS: e.g. the user specifies a passage cross-section at
705#. station "entrance.27", but there is no station "entrance.27" in
706#. the centre-line.
707#: ../src/netskel.c:1046
708#: n:83
709#, c-format
710msgid "Cross section specified at non-existent station “%s”"
711msgstr ""
712
713#. TRANSLATORS: In data with backsights, the user has tried to give a
714#. plumb for the foresight and a clino reading for the backsight, or
715#. something similar.
716#: ../src/datain.c:1028
717#: ../src/datain.c:1052
718#: n:84
719msgid "CLINO and BACKCLINO readings must be of the same type"
720msgstr ""
721
722#: ../src/readval.c:524
723#: n:86
724msgid "Invalid month"
725msgstr ""
726
727#. TRANSLATORS: e.g. 31st of April, or 32nd of any month
728#: ../src/readval.c:533
729#: n:87
730msgid "Invalid day of the month"
731msgstr ""
732
733#: ../src/cavern.c:247
734#: n:88
735#, c-format
736msgid "3d file format versions %d to %d supported"
737msgstr ""
738
739#: ../src/readval.c:200
740#: n:89
741msgid "Expecting survey name"
742msgstr ""
743
744#: ../src/datain.c:401
745#: ../src/extend.c:554
746#: ../src/img_hosted.c:30
747#: ../src/mainfrm.cc:426
748#: ../src/sorterr.c:146
749#: n:24
750#, c-format
751msgid "Couldn’t open file “%s”"
752msgstr ""
753
754#: ../src/printwx.cc:687
755#: n:402
756#, fuzzy, c-format
757msgid "Couldn’t write file “%s”"
758msgstr "Неуспех при запис на файл: “%s”"
759
760#. TRANSLATORS: If you're unsure what "deprecated" means, see:
761#. http://en.wikipedia.org/wiki/Deprecation
762#: ../src/commands.c:496
763#: ../src/commands.c:569
764#: ../src/commands.c:591
765#: ../src/commands.c:1189
766#: ../src/commands.c:1538
767#: ../src/readval.c:96
768#: n:95
769msgid "Further uses of this deprecated feature will not be reported"
770msgstr ""
771
772#. TRANSLATORS: %s is replaced by the amount the readings disagree
773#. by, e.g. "2.5°" or "3ᵍ".
774#: ../src/datain.c:910
775#: n:98
776#, c-format
777msgid "COMPASS reading and BACKCOMPASS reading disagree by %s"
778msgstr ""
779
780#. TRANSLATORS: %s is replaced by the amount the readings disagree
781#. by, e.g. "2.5°" or "3ᵍ".
782#: ../src/datain.c:1104
783#: n:99
784#, c-format
785msgid "CLINO reading and BACKCLINO reading disagree by %s"
786msgstr ""
787
788#: ../src/commands.c:1186
789#: n:104
790#, c-format
791msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
792msgstr ""
793
794#. TRANSLATORS: Perhaps the user tried to load a different type of file as
795#. a Survex .3d file, or the .3d file was corrupted.
796#: ../src/3dtopos.c:157
797#: ../src/3dtopos.c:163
798#: ../src/cad3d.c:909
799#: ../src/cad3d.c:920
800#: ../src/img_hosted.c:39
801#: n:106
802#, c-format
803msgid "Bad 3d image file “%s”"
804msgstr ""
805
806#. TRANSLATORS: This is the date format string used to timestamp .3d
807#. files internally.  Probably best to keep it the same for all
808#. translations.
809#: ../src/img.c:43
810#: ../src/mainfrm.cc:1463
811#: n:107
812#, c-format
813msgid "%a,%Y.%m.%d %H:%M:%S %Z"
814msgstr ""
815
816#. TRANSLATORS: used a processed survey with no processing date/time info
817#: ../src/mainfrm.cc:1456
818#: n:108
819msgid "Date and time not available."
820msgstr ""
821
822#: ../src/img_hosted.c:40
823#: n:109
824#, c-format
825msgid "Error reading from file “%s”"
826msgstr ""
827
828#: ../src/cavernlog.cc:522
829#: ../src/filename.c:79
830#: ../src/img_hosted.c:41
831#: ../src/mainfrm.cc:384
832#: ../src/mainfrm.cc:2021
833#: n:110
834#, c-format
835msgid "Error writing to file “%s”"
836msgstr ""
837
838#: ../src/filename.c:82
839#: n:111
840msgid "Error writing to file"
841msgstr ""
842
843#: ../src/cavern.c:388
844#: n:113
845#, c-format
846msgid "There were %d warning(s) and %d error(s) - no output files produced."
847msgstr ""
848
849#: ../src/img_hosted.c:42
850#: n:114
851#, c-format
852msgid "File “%s” has a newer format than this program can understand"
853msgstr ""
854
855#: ../src/printwx.cc:1035
856#: n:115
857msgid "North"
858msgstr "Север"
859
860#. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
861#: ../src/printwx.cc:1060
862#: n:116
863msgid "Elevation on"
864msgstr ""
865
866#: ../src/printwx.cc:489
867#: n:117
868msgid "P&lan view"
869msgstr "&План"
870
871#: ../src/printwx.cc:491
872#: n:285
873msgid "&Elevation"
874msgstr "Про&фил"
875
876#: ../src/gfxcore.cc:807
877#: ../src/mainfrm.cc:167
878#: n:118
879msgid "Elevation"
880msgstr "Профил"
881
882#. TRANSLATORS: Label used for "clino" in Aven when the view is
883#. from directly above.
884#: ../src/gfxcore.cc:719
885#: n:432
886msgid "Plan"
887msgstr "План"
888
889#. TRANSLATORS: Label used for "clino" in Aven when the view is
890#. from directly below.
891#: ../src/gfxcore.cc:729
892#: n:433
893msgid "Kiwi Plan"
894msgstr ""
895
896#: ../src/cavern.c:352
897#: n:120
898msgid "Calculating statistics"
899msgstr ""
900
901#: ../src/readval.c:489
902#: n:121
903msgid "Expecting string field"
904msgstr ""
905
906#: ../src/cmdline.c:212
907#: n:122
908msgid "too few arguments"
909msgstr "недостатъчно аргументи"
910
911#: ../src/cmdline.c:219
912#: n:123
913msgid "too many arguments"
914msgstr "твърде много аргументи"
915
916#: ../src/cmdline.c:178
917#: ../src/cmdline.c:181
918#: ../src/cmdline.c:185
919#: n:124
920msgid "FILE"
921msgstr "ФАЙЛ"
922
923#. TRANSLATORS: In French, Eric chose to use the terminology used by
924#. toporobot: "sequence" for the English "traverse", which makes sense
925#. (although toporobot actually uses this term to mean something more
926#. specific).  Feel free to follow this lead if you can't think of a better
927#. term - these messages mostly indicate how processing is progressing.
928#.
929#. A trailing traverse is a dead end back to a junction.
930#: ../src/netskel.c:177
931#: n:125
932msgid "Removing trailing traverses"
933msgstr ""
934
935#. TRANSLATORS: In French, Eric chose to use the terminology used by
936#. toporobot: "sequence" for the English "traverse", which makes sense
937#. (although toporobot actually uses this term to mean something more
938#. specific).  Feel free to follow this lead if you can't think of a better
939#. term - these messages mostly indicate how processing is progressing.
940#: ../src/netskel.c:236
941#: n:126
942msgid "Concatenating traverses"
943msgstr ""
944
945#. TRANSLATORS: In French, Eric chose to use the terminology used by
946#. toporobot: "sequence" for the English "traverse", which makes sense
947#. (although toporobot actually uses this term to mean something more
948#. specific).  Feel free to follow this lead if you can't think of a better
949#. term - these messages mostly indicate how processing is progressing.
950#: ../src/netskel.c:434
951#: n:127
952msgid "Calculating traverses"
953msgstr ""
954
955#. TRANSLATORS: In French, Eric chose to use the terminology used by
956#. toporobot: "sequence" for the English "traverse", which makes sense
957#. (although toporobot actually uses this term to mean something more
958#. specific).  Feel free to follow this lead if you can't think of a better
959#. term - these messages mostly indicate how processing is progressing.
960#.
961#. A trailing traverse is a dead end back to a junction.
962#: ../src/netskel.c:779
963#: n:128
964msgid "Calculating trailing traverses"
965msgstr ""
966
967#: ../src/network.c:82
968#: n:129
969msgid "Simplifying network"
970msgstr ""
971
972#: ../src/network.c:540
973#: n:130
974msgid "Calculating network"
975msgstr ""
976
977#: ../src/datain.c:1519
978#: n:131
979#, c-format
980msgid "Found “%s”, expecting “F” or “B”"
981msgstr ""
982
983#: ../src/cavern.c:454
984#: n:132
985#, c-format
986msgid "Total length of survey legs = %7.2f%s (%7.2f%s adjusted)"
987msgstr ""
988
989#: ../src/cavern.c:457
990#: n:133
991#, c-format
992msgid "Total plan length of survey legs = %7.2f%s"
993msgstr ""
994
995#: ../src/cavern.c:460
996#: n:134
997#, c-format
998msgid "Total vertical length of survey legs = %7.2f%s"
999msgstr ""
1000
1001#. TRANSLATORS: numbers are altitudes of highest and lowest stations
1002#: ../src/cavern.c:467
1003#: n:135
1004#, c-format
1005msgid "Vertical range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1006msgstr ""
1007
1008#. TRANSLATORS: c.f. previous message
1009#: ../src/cavern.c:470
1010#: n:136
1011#, fuzzy, c-format
1012msgid "North-South range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1013msgstr "Север-Юг range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1014
1015#. TRANSLATORS: c.f. previous two messages
1016#: ../src/cavern.c:473
1017#: n:137
1018#, fuzzy, c-format
1019msgid "East-West range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1020msgstr "Изток-Запад range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1021
1022#: ../src/cavern.c:439
1023#: n:138
1024msgid "There is 1 loop."
1025msgstr ""
1026
1027#: ../src/cavern.c:441
1028#: n:139
1029#, c-format
1030msgid "There are %ld loops."
1031msgstr ""
1032
1033#: ../src/cavern.c:374
1034#: n:140
1035#, c-format
1036msgid "CPU time used %5.2fs"
1037msgstr ""
1038
1039#: ../src/cavern.c:377
1040#: n:141
1041#, c-format
1042msgid "Time used %5.2fs"
1043msgstr ""
1044
1045#: ../src/cavern.c:379
1046#: n:142
1047msgid "Time used unavailable"
1048msgstr ""
1049
1050#: ../src/cavern.c:382
1051#: n:143
1052#, c-format
1053msgid "Time used %5.2fs (%5.2fs CPU time)"
1054msgstr ""
1055
1056#: ../src/netskel.c:744
1057#: n:145
1058#, c-format
1059msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1060msgstr ""
1061
1062#: ../src/netskel.c:747
1063#: n:146
1064#, fuzzy, c-format
1065msgid "Error %6.2f%%"
1066msgstr "Грешка %6.2f%%"
1067
1068#. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1069#. traverse has zero length, so error per metre is meaningless.
1070#.
1071#. There should be 4 spaces between "Error" and "N/A" so that it lines
1072#. up with the numbers in the message above.
1073#: ../src/netskel.c:754
1074#: n:147
1075#, fuzzy
1076msgid "Error    N/A"
1077msgstr "Грешка    N/A"
1078
1079#. TRANSLATORS: description of --help option
1080#: ../src/cmdline.c:138
1081#: n:150
1082msgid "display this help and exit"
1083msgstr ""
1084
1085#. TRANSLATORS: description of --verbose option
1086#: ../src/cmdline.c:141
1087#: n:151
1088msgid "output version information and exit"
1089msgstr ""
1090
1091#. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1092#: ../src/cmdline.c:170
1093#: n:153
1094msgid "OPTION"
1095msgstr "ОПЦИЯ"
1096
1097#: ../src/mainfrm.cc:171
1098#: ../src/printwx.cc:435
1099#: ../src/printwx.cc:1097
1100#: ../src/printwx.cc:1146
1101#: n:154
1102msgid "Scale"
1103msgstr "Мащаб"
1104
1105#: ../src/cmdline.c:194
1106#: n:157
1107#, c-format
1108msgid "Try “%s --help” for more information.\n"
1109msgstr ""
1110
1111#: ../src/avenprcore.cc:169
1112#: n:166
1113#, c-format
1114msgid "Page %d of %d"
1115msgstr "Страница %d от %d"
1116
1117#: ../src/avenprcore.cc:172
1118#: ../src/printwx.cc:1542
1119#: n:167
1120#, fuzzy, c-format
1121msgid "Survey “%s”   Page %d (of %d)   Processed on %s"
1122msgstr "Survey “%s”   Страница %d от %d   Processed on %s"
1123
1124#. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1125#. something like "123°".  The bearing is up the page.
1126#: ../src/printwx.cc:1041
1127#: n:168
1128#, fuzzy, c-format
1129msgid "Plan view, %s up page"
1130msgstr "План, %s up page"
1131
1132#. TRANSLATORS: This is used on printouts of elevations, with %s
1133#. replaced by something like "123°".  The bearing is the direction
1134#. we’re looking.
1135#: ../src/printwx.cc:1073
1136#: n:169
1137#, fuzzy, c-format
1138msgid "Elevation facing %s"
1139msgstr "Профил Азимут %s"
1140
1141#. TRANSLATORS: This is used on printouts of tilted elevations, with
1142#. the first %s replaced by something like "123°", and the second by
1143#. something like "-45°".  The bearing is the direction we’re
1144#. looking.
1145#: ../src/printwx.cc:1080
1146#: n:284
1147#, fuzzy, c-format
1148msgid "Elevation facing %s, tilted %s"
1149msgstr "Профил Азимут %s, Наклон %s"
1150
1151#. TRANSLATORS: This is used on printouts of extended elevations.
1152#: ../src/printwx.cc:1089
1153#: n:191
1154msgid "Extended elevation"
1155msgstr ""
1156
1157#: ../src/cavern.c:425
1158#: n:172
1159msgid "Survey contains 1 survey station,"
1160msgstr ""
1161
1162#: ../src/cavern.c:427
1163#: n:173
1164#, c-format
1165msgid "Survey contains %ld survey stations,"
1166msgstr ""
1167
1168#: ../src/cavern.c:431
1169#: n:174
1170msgid " joined by 1 leg."
1171msgstr ""
1172
1173#: ../src/cavern.c:433
1174#: n:175
1175#, c-format
1176msgid " joined by %ld legs."
1177msgstr ""
1178
1179#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1180#: ../src/listpos.c:185
1181#: n:176
1182msgid "node"
1183msgstr ""
1184
1185#. TRANSLATORS: node/nodes as in:  "Survey has 1 2-node and 2 3-nodes."
1186#: ../src/listpos.c:187
1187#: n:177
1188msgid "nodes"
1189msgstr ""
1190
1191#. TRANSLATORS: "Connected component" in the graph theory sense - it
1192#. means there are %ld bits of survey with no connections between them.
1193#. This message is only used if there are more than 1.
1194#: ../src/cavern.c:450
1195#: n:178
1196#, c-format
1197msgid "Survey has %ld connected components."
1198msgstr ""
1199
1200#. TRANSLATORS: Label for button in aven’s cavern log window which
1201#. allows the user to save the log to a file.
1202#: ../src/cavernlog.cc:456
1203#: n:446
1204msgid "Save Log"
1205msgstr ""
1206
1207#. TRANSLATORS: Label for button in aven’s cavern log window which
1208#. causes the survey data to be reprocessed.
1209#: ../src/cavernlog.cc:463
1210#: ../src/cavernlog.cc:474
1211#: n:184
1212#, fuzzy
1213msgid "Reprocess"
1214msgstr "Възстановяване"
1215
1216#: ../src/cmdline.c:242
1217#: ../src/cmdline.c:261
1218#: n:185
1219#, c-format
1220msgid "numeric argument “%s” out of range"
1221msgstr ""
1222
1223#: ../src/cmdline.c:244
1224#: n:186
1225#, c-format
1226msgid "argument “%s” not an integer"
1227msgstr ""
1228
1229#: ../src/cmdline.c:263
1230#: n:187
1231#, c-format
1232msgid "argument “%s” not a number"
1233msgstr ""
1234
1235#: ../src/commands.c:929
1236#: n:188
1237msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1238msgstr ""
1239
1240#: ../src/commands.c:932
1241#: n:189
1242msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1243msgstr ""
1244
1245#: ../src/listpos.c:82
1246#: n:190
1247#, c-format
1248msgid "Station “%s” referred to by *entrance or *export but never used"
1249msgstr ""
1250
1251#: ../src/commands.c:675
1252#: n:192
1253msgid "No matching BEGIN"
1254msgstr ""
1255
1256#. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
1257#. same <survey> if it’s given at all
1258#: ../src/commands.c:703
1259#: n:193
1260msgid "Survey name doesn’t match BEGIN"
1261msgstr ""
1262
1263#. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1264#. END command omits it, e.g.:
1265#.
1266#. *begin entrance
1267#. 1 2 10.00 178 -01
1268#. *end     <--[Message given here]
1269#: ../src/commands.c:712
1270#: n:194
1271msgid "Survey name omitted from END"
1272msgstr ""
1273
1274#. TRANSLATORS: Heading line for .pos file.  Please try to ensure the “,”s
1275#. (or at least the columns) are in the same place
1276#: ../src/3dtopos.c:112
1277#: n:195
1278msgid "( Easting, Northing, Altitude )"
1279msgstr "( изток,   север,    височина )"
1280
1281#. TRANSLATORS: bpp is "Bits Per Pixel"
1282#: ../src/aboutdlg.cc:181
1283#: n:196
1284#, c-format
1285msgid "Display Depth: %d bpp"
1286msgstr ""
1287
1288#. TRANSLATORS: appended to previous message if the display is colour
1289#: ../src/aboutdlg.cc:183
1290#: n:197
1291msgid " (colour)"
1292msgstr ""
1293
1294#: ../src/readval.c:512
1295#: ../src/readval.c:522
1296#: ../src/readval.c:530
1297#: n:198
1298#, c-format
1299msgid "Expecting date, found “%s”"
1300msgstr ""
1301
1302#. TRANSLATORS: --help output for --survey option.
1303#.
1304#. "this" has been added to English translation
1305#: ../src/3dtopos.c:50
1306#: ../src/aven.cc:66
1307#: ../src/cad3d.c:660
1308#: ../src/diffpos.c:57
1309#: ../src/dump3d.c:49
1310#: ../src/extend.c:459
1311#: n:199
1312msgid "only load the sub-survey with this prefix"
1313msgstr ""
1314
1315#. TRANSLATORS: --help output for aven --print option
1316#: ../src/aven.cc:68
1317#: n:119
1318msgid "print and exit (requires a 3d file)"
1319msgstr ""
1320
1321#. TRANSLATORS: --help output for cavern --percentage option
1322#: ../src/cavern.c:125
1323#: n:161
1324msgid "display percentage progress"
1325msgstr ""
1326
1327#. TRANSLATORS: --help output for cavern --output option
1328#: ../src/cavern.c:127
1329#: n:162
1330msgid "set location for output files"
1331msgstr ""
1332
1333#. TRANSLATORS: --help output for cavern --quiet option
1334#: ../src/cavern.c:129
1335#: n:163
1336msgid "only show brief summary (-qq for errors only)"
1337msgstr ""
1338
1339#. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1340#: ../src/cavern.c:131
1341#: n:164
1342msgid "do not create .err file"
1343msgstr ""
1344
1345#. TRANSLATORS: --help output for cavern --warnings-are-errors option
1346#: ../src/cavern.c:133
1347#: n:165
1348msgid "turn warnings into errors"
1349msgstr ""
1350
1351#. TRANSLATORS: --help output for cavern --log option
1352#: ../src/cavern.c:135
1353#: n:170
1354msgid "log output to .log file"
1355msgstr ""
1356
1357#. TRANSLATORS: --help output for cavern --3d-version option
1358#: ../src/cavern.c:137
1359#: n:171
1360msgid "specify the 3d file format version to output"
1361msgstr ""
1362
1363#. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1364#. meaningless to say your tape is marked in "0 feet" (but you might
1365#. measure distance by counting knots on a diving line, and tie them
1366#. every "2 feet").
1367#: ../src/commands.c:1451
1368#: n:200
1369msgid "*UNITS factor must be non-zero"
1370msgstr ""
1371
1372#: ../src/mainfrm.cc:1473
1373#: n:202
1374#, c-format
1375msgid "No survey data in 3d file “%s”"
1376msgstr ""
1377
1378#: ../src/gfxcore.cc:709
1379#: n:203
1380msgid "Facing"
1381msgstr "Азимут"
1382
1383#. TRANSLATORS: for the title of the About box
1384#: ../src/aboutdlg.cc:63
1385#: n:205
1386#, c-format
1387msgid "About %s"
1388msgstr "За %s"
1389
1390#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1391#. - it should be translated to the terminology that cavers using the
1392#. language would use.
1393#.
1394#. File->Open dialog:
1395#: ../src/mainfrm.cc:1979
1396#: n:206
1397msgid "Select a survey file to view"
1398msgstr ""
1399
1400#. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
1401#. file extension, so neither should be translated.
1402#: ../src/mainfrm.cc:1956
1403#: n:207
1404msgid "Survex 3d files"
1405msgstr ""
1406
1407#: ../src/mainfrm.cc:1971
1408#: ../src/mainfrm.cc:2422
1409#: ../src/printwx.cc:667
1410#: n:208
1411msgid "All files"
1412msgstr ""
1413
1414#. TRANSLATORS: Here "survey" is a "cave map" rather than
1415#. list of questions - it should be translated to the
1416#. terminology that cavers using the language would use.
1417#: ../src/mainfrm.cc:1953
1418#: n:229
1419#, fuzzy
1420msgid "All survey files"
1421msgstr "Всички поддържани файлове"
1422
1423#. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
1424#. file extension, so neither should be translated.
1425#: ../src/mainfrm.cc:1959
1426#: n:329
1427msgid "Survex svx files"
1428msgstr ""
1429
1430#. TRANSLATORS: "Compass" as in Larry Fish’s cave
1431#. surveying package, so should not be translated
1432#: ../src/mainfrm.cc:1967
1433#: n:330
1434msgid "Compass DAT and MAK files"
1435msgstr ""
1436
1437#: ../src/printwx.cc:311
1438#: n:411
1439msgid "DXF files"
1440msgstr "DXF файл"
1441
1442#: ../src/printwx.cc:312
1443#: n:412
1444msgid "EPS files"
1445msgstr "EPS файл"
1446
1447#: ../src/printwx.cc:313
1448#: n:413
1449msgid "GPX files"
1450msgstr "GPX файл"
1451
1452#. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
1453#. on a (usually large) sheet of paper using a pen mounted in a motorised
1454#. mechanism.
1455#: ../src/printwx.cc:317
1456#: n:414
1457msgid "HPGL for plotters"
1458msgstr ""
1459
1460#: ../src/printwx.cc:319
1461#: n:444
1462msgid "KML files"
1463msgstr "KML файл"
1464
1465#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
1466#. so should not be translated:
1467#. http://www.fountainware.com/compass/
1468#. http://www.psc-cavers.org/carto/
1469#: ../src/printwx.cc:324
1470#: n:415
1471msgid "Compass PLT for use with Carto"
1472msgstr ""
1473
1474#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
1475#. translated: http://www.skencil.org/
1476#: ../src/printwx.cc:327
1477#: n:416
1478msgid "Skencil files"
1479msgstr "Skencil файл"
1480
1481#: ../src/printwx.cc:328
1482#: n:417
1483msgid "SVG files"
1484msgstr "SVG файл"
1485
1486#: ../src/printwx.cc:318
1487#: n:445
1488msgid "JSON files"
1489msgstr "JSON файл"
1490
1491#. TRANSLATORS: Log files from running cavern (extension .log)
1492#: ../src/cavernlog.cc:508
1493#: n:447
1494msgid "Log files"
1495msgstr ""
1496
1497#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1498#. - it should be translated to the terminology that cavers using the
1499#. language would use.
1500#.
1501#. This string is used in the about box (summarising the purpose of aven).
1502#: ../src/aboutdlg.cc:91
1503#: n:209
1504msgid "Survey visualisation tool"
1505msgstr ""
1506
1507#. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
1508#. some languages here:
1509#. http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
1510#: ../src/aboutdlg.cc:105
1511#: n:219
1512msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1513msgstr ""
1514
1515#. TRANSLATORS: Part of 3dtopos --help
1516#: ../src/3dtopos.c:86
1517#: n:217
1518msgid "3D_FILE [POS_FILE]"
1519msgstr ""
1520
1521#. TRANSLATORS: Part of diffpos --help
1522#: ../src/diffpos.c:265
1523#: n:218
1524msgid "FILE1 FILE2 [THRESHOLD]"
1525msgstr ""
1526
1527#. TRANSLATORS: Part of diffpos --help
1528#: ../src/diffpos.c:267
1529#: n:255
1530#, c-format
1531msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1532msgstr ""
1533
1534#. TRANSLATORS: Part of extend --help
1535#: ../src/extend.c:481
1536#: n:267
1537msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1538msgstr ""
1539
1540#. TRANSLATORS: Part of sorterr --help
1541#: ../src/sorterr.c:127
1542#: n:268
1543msgid "ERR_FILE [HOW_MANY]"
1544msgstr ""
1545
1546#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1547#. - it should be translated to the terminology that cavers using the
1548#. language would use.
1549#.
1550#. Part of aven --help
1551#: ../src/aven.cc:115
1552#: ../src/aven.cc:139
1553#: n:269
1554msgid "[SURVEY_FILE]"
1555msgstr ""
1556
1557#. TRANSLATORS: Used in the "colour key" for "colour by date" if there
1558#. are surveys without date information.  Try to keep this fairly short.
1559#: ../src/gfxcore.cc:1053
1560#: n:221
1561msgid "Undated"
1562msgstr "Обновено"
1563
1564#. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1565#. which aren’t part of a loop and so have no error information. Try to keep
1566#. this fairly short.
1567#: ../src/gfxcore.cc:1078
1568#: n:290
1569msgid "Not in loop"
1570msgstr ""
1571
1572#. TRANSLATORS: error from:
1573#.
1574#. *data normal newline from to tape compass clino
1575#: ../src/commands.c:1290
1576#: n:222
1577msgid "NEWLINE can’t be the first reading"
1578msgstr ""
1579
1580#. TRANSLATORS: error from:
1581#.
1582#. *data normal from to tape compass clino newline
1583#: ../src/commands.c:1333
1584#: n:223
1585msgid "NEWLINE can’t be the last reading"
1586msgstr ""
1587
1588#. TRANSLATORS: Error given by something like:
1589#.
1590#. *data normal station tape compass clino
1591#.
1592#. ("station" signifies interleaved data).
1593#: ../src/commands.c:1356
1594#: n:224
1595msgid "Interleaved readings, but no NEWLINE"
1596msgstr ""
1597
1598#. TRANSLATORS: caused by e.g.
1599#.
1600#. *data diving station newline depth tape compass
1601#.
1602#. ("depth" needs to occur before "newline").
1603#: ../src/commands.c:1227
1604#: n:225
1605#, c-format
1606msgid "Reading “%s” must occur before NEWLINE"
1607msgstr ""
1608
1609#. TRANSLATORS: e.g.
1610#.
1611#. *data normal from to tape newline compass clino
1612#: ../src/commands.c:1280
1613#: n:226
1614msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1615msgstr ""
1616
1617#. TRANSLATORS: e.g.
1618#.
1619#. *calibrate tape compass 1 1
1620#: ../src/commands.c:1492
1621#: n:227
1622msgid "Can’t calibrate angular and length quantities together"
1623msgstr ""
1624
1625#: ../src/commands.c:618
1626#: n:397
1627msgid "Bad *alias command"
1628msgstr ""
1629
1630#. TRANSLATORS: %s will be replaced by the application name ("Aven"
1631#. currently)
1632#: ../src/log.cc:32
1633#: n:228
1634#, c-format
1635msgid "%s Error Log"
1636msgstr ""
1637
1638#. TRANSLATORS: The text on the action button in the "Export" settings
1639#. dialog
1640#: ../src/printwx.cc:626
1641#: n:230
1642msgid "&Export…"
1643msgstr ""
1644
1645#. TRANSLATORS: "Rotation" menu.  The accelerators must be different within
1646#. this group.  Tickable menu item which toggles auto rotation
1647#: ../src/mainfrm.cc:832
1648#: n:231
1649#, fuzzy
1650msgid "Au&to-Rotate\tSpace"
1651msgstr "&Включи ротация\tSpace"
1652
1653#: ../src/mainfrm.cc:834
1654#: n:232
1655msgid "Speed &Up"
1656msgstr ""
1657
1658#: ../src/mainfrm.cc:835
1659#: n:233
1660msgid "Slow &Down"
1661msgstr ""
1662
1663#: ../src/mainfrm.cc:837
1664#: n:234
1665msgid "&Reverse Direction"
1666msgstr "&Обръщане на посока"
1667
1668#: ../src/mainfrm.cc:839
1669#: n:235
1670msgid "Step Once &Anticlockwise"
1671msgstr ""
1672
1673#: ../src/mainfrm.cc:840
1674#: n:236
1675msgid "Step Once &Clockwise"
1676msgstr ""
1677
1678#. TRANSLATORS: View *looking* North
1679#: ../src/gfxcore.cc:3396
1680#: ../src/mainfrm.cc:843
1681#: n:240
1682msgid "View &North"
1683msgstr ""
1684
1685#. TRANSLATORS: View *looking* East
1686#: ../src/gfxcore.cc:3398
1687#: ../src/mainfrm.cc:844
1688#: n:241
1689msgid "View &East"
1690msgstr ""
1691
1692#. TRANSLATORS: View *looking* South
1693#: ../src/gfxcore.cc:3400
1694#: ../src/mainfrm.cc:845
1695#: n:242
1696msgid "View &South"
1697msgstr ""
1698
1699#. TRANSLATORS: View *looking* West
1700#: ../src/gfxcore.cc:3402
1701#: ../src/mainfrm.cc:846
1702#: n:243
1703msgid "View &West"
1704msgstr ""
1705
1706#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1707#. - it should be translated to the terminology that cavers using the
1708#. language would use.
1709#: ../src/mainfrm.cc:851
1710#: n:244
1711msgid "Shift Survey &Left"
1712msgstr ""
1713
1714#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1715#. - it should be translated to the terminology that cavers using the
1716#. language would use.
1717#: ../src/mainfrm.cc:855
1718#: n:245
1719msgid "Shift Survey &Right"
1720msgstr ""
1721
1722#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1723#. - it should be translated to the terminology that cavers using the
1724#. language would use.
1725#: ../src/mainfrm.cc:859
1726#: n:246
1727msgid "Shift Survey &Up"
1728msgstr ""
1729
1730#. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1731#. - it should be translated to the terminology that cavers using the
1732#. language would use.
1733#: ../src/mainfrm.cc:863
1734#: n:247
1735msgid "Shift Survey &Down"
1736msgstr ""
1737
1738#: ../src/gfxcore.cc:3419
1739#: ../src/mainfrm.cc:865
1740#: n:248
1741msgid "&Plan View"
1742msgstr "&План"
1743
1744#: ../src/gfxcore.cc:3420
1745#: ../src/mainfrm.cc:866
1746#: n:249
1747msgid "Ele&vation"
1748msgstr "Про&фил"
1749
1750#: ../src/mainfrm.cc:868
1751#: n:250
1752msgid "&Higher Viewpoint"
1753msgstr "Поглед от &горе"
1754
1755#: ../src/mainfrm.cc:869
1756#: n:251
1757msgid "L&ower Viewpoint"
1758msgstr "Поглед от &долу"
1759
1760#: ../src/mainfrm.cc:872
1761#: n:252
1762msgid "&Zoom In\t]"
1763msgstr "П&риближи\t]"
1764
1765#: ../src/mainfrm.cc:873
1766#: n:253
1767msgid "Zoo&m Out\t["
1768msgstr "&Отдалечи\t["
1769
1770#: ../src/mainfrm.cc:875
1771#: n:254
1772msgid "Restore De&fault View"
1773msgstr "&Стандартен изглед"
1774
1775#. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1776#. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1777#. the "what to print/export" dialog.
1778#: ../src/printwx.cc:399
1779#: n:283
1780msgid "View"
1781msgstr ""
1782
1783#. TRANSLATORS: Used as a label for the surrounding box for the "survey
1784#. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1785#. "Elements" isn’t a good name for this but nothing better has yet come to
1786#. mind!
1787#: ../src/printwx.cc:404
1788#: n:256
1789msgid "Elements"
1790msgstr ""
1791
1792#: ../src/printwx.cc:410
1793#: n:410
1794msgid "Export format"
1795msgstr ""
1796
1797#: ../src/printwx.cc:459
1798#: ../src/printwx.cc:839
1799#: n:257
1800#, c-format
1801msgid "%d pages (%dx%d)"
1802msgstr ""
1803
1804#. TRANSLATORS: used in the scale drop down selector in the print
1805#. dialog the implicit meaning is "choose a suitable scale to fit
1806#. the plot on a single page", but we need something shorter
1807#: ../src/printwx.cc:441
1808#: ../src/printwx.cc:858
1809#: n:258
1810msgid "One page"
1811msgstr "Една страница"
1812
1813#: ../src/mainfrm.cc:163
1814#: ../src/printwx.cc:472
1815#: n:259
1816msgid "Bearing"
1817msgstr ""
1818
1819#: ../src/printwx.cc:513
1820#: n:260
1821msgid "Station Names"
1822msgstr ""
1823
1824#: ../src/printwx.cc:509
1825#: n:261
1826msgid "Crosses"
1827msgstr "Кръстчета"
1828
1829#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1830#. "survey stations".
1831#: ../src/printwx.cc:499
1832#: n:262
1833msgid "Underground Survey Legs"
1834msgstr ""
1835
1836#: ../src/printwx.cc:529
1837#: n:393
1838msgid "Cross-sections"
1839msgstr ""
1840
1841#: ../src/printwx.cc:534
1842#: n:394
1843msgid "Walls"
1844msgstr "Стени"
1845
1846#. TRANSLATORS: Label for checkbox which controls whether there's a
1847#. layer in the exported file (for formats such as DXF and SVG)
1848#. containing polygons for the inside of cave passages).
1849#: ../src/printwx.cc:541
1850#: n:395
1851msgid "Passages"
1852msgstr ""
1853
1854#: ../src/printwx.cc:545
1855#: n:421
1856msgid "Origin in centre"
1857msgstr ""
1858
1859#: ../src/printwx.cc:549
1860#: n:422
1861msgid "Full coordinates"
1862msgstr ""
1863
1864#. TRANSLATORS: Used in the print dialog:
1865#: ../src/printwx.cc:479
1866#: n:263
1867#, fuzzy
1868msgid "Tilt angle"
1869msgstr "Наклон"
1870
1871#. TRANSLATORS: used in the print dialog - controls drawing lines
1872#. around each page
1873#: ../src/printwx.cc:557
1874#: n:264
1875msgid "Page Borders"
1876msgstr ""
1877
1878#. TRANSLATORS: As in the legend on a map.  Used in the print dialog -
1879#. controls drawing the box at the lower left with survey name, view
1880#. angles, etc
1881#: ../src/printwx.cc:568
1882#: n:265
1883msgid "Legend"
1884msgstr ""
1885
1886#. TRANSLATORS: will be used in the print dialog - check this to print
1887#. blank pages (otherwise they’ll be skipped to save paper)
1888#: ../src/printwx.cc:563
1889#: n:266
1890msgid "Blank Pages"
1891msgstr ""
1892
1893#. TRANSLATORS: Items in the "View" menu:
1894#: ../src/mainfrm.cc:892
1895#: n:270
1896msgid "Station &Names\tCtrl+N"
1897msgstr ""
1898
1899#. TRANSLATORS: Toggles drawing of 3D passages
1900#: ../src/mainfrm.cc:894
1901#: n:346
1902msgid "Passage &Tubes\tCtrl+T"
1903msgstr ""
1904
1905#: ../src/mainfrm.cc:895
1906#: n:271
1907msgid "&Crosses\tCtrl+X"
1908msgstr "&Кръстчета\tCtrl+X"
1909
1910#: ../src/mainfrm.cc:896
1911#: n:297
1912msgid "&Grid\tCtrl+G"
1913msgstr "&Мрежа\tCtrl+G"
1914
1915#: ../src/mainfrm.cc:897
1916#: n:318
1917msgid "&Bounding Box\tCtrl+B"
1918msgstr "&Рамка\tCtrl+B"
1919
1920#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1921#. "survey stations".
1922#: ../src/mainfrm.cc:901
1923#: n:272
1924msgid "&Underground Survey Legs\tCtrl+L"
1925msgstr ""
1926
1927#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1928#. "survey stations".
1929#: ../src/mainfrm.cc:904
1930#: n:291
1931msgid "&Surface Survey Legs\tCtrl+F"
1932msgstr ""
1933
1934#: ../src/mainfrm.cc:920
1935#: n:273
1936msgid "&Overlapping Names"
1937msgstr ""
1938
1939#: ../src/gfxcore.cc:3457
1940#: ../src/mainfrm.cc:921
1941#: n:292
1942msgid "Colour by &Depth"
1943msgstr ""
1944
1945#: ../src/gfxcore.cc:3458
1946#: ../src/mainfrm.cc:922
1947#: n:293
1948msgid "Colour by D&ate"
1949msgstr ""
1950
1951#: ../src/gfxcore.cc:3459
1952#: ../src/mainfrm.cc:923
1953#: n:289
1954msgid "Colour by E&rror"
1955msgstr ""
1956
1957#: ../src/gfxcore.cc:3460
1958#: ../src/mainfrm.cc:924
1959#: n:85
1960msgid "Colour by Grad&ient"
1961msgstr ""
1962
1963#: ../src/gfxcore.cc:3461
1964#: ../src/mainfrm.cc:925
1965#: n:82
1966msgid "Colour by &Length"
1967msgstr ""
1968
1969#: n:448
1970msgid "Colour by &Survey"
1971msgstr ""
1972
1973#: ../src/mainfrm.cc:927
1974#: n:294
1975msgid "Highlight &Entrances"
1976msgstr ""
1977
1978#: ../src/mainfrm.cc:928
1979#: n:295
1980msgid "Highlight &Fixed Points"
1981msgstr ""
1982
1983#: ../src/mainfrm.cc:929
1984#: n:296
1985msgid "Highlight E&xported Points"
1986msgstr ""
1987
1988#: ../src/printwx.cc:517
1989#: n:418
1990msgid "Entrances"
1991msgstr "Входове"
1992
1993#: ../src/printwx.cc:521
1994#: n:419
1995msgid "Fixed Points"
1996msgstr ""
1997
1998#: ../src/printwx.cc:525
1999#: n:420
2000msgid "Exported Stations"
2001msgstr ""
2002
2003#: ../src/mainfrm.cc:934
2004#: n:237
2005msgid "&Perspective"
2006msgstr ""
2007
2008#: ../src/mainfrm.cc:936
2009#: n:238
2010msgid "Textured &Walls"
2011msgstr ""
2012
2013#. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2014#. using that term instead if it gives a better translation which most
2015#. users will understand.
2016#: ../src/mainfrm.cc:940
2017#: n:239
2018msgid "Fade Distant Ob&jects"
2019msgstr ""
2020
2021#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2022#. "survey stations".
2023#: ../src/mainfrm.cc:943
2024#: n:298
2025msgid "Smoot&hed Survey Legs"
2026msgstr ""
2027
2028#: ../src/mainfrm.cc:949
2029#: ../src/mainfrm.cc:953
2030#: n:356
2031msgid "Full Screen &Mode\tF11"
2032msgstr "&Цял екран\tF11"
2033
2034#: ../src/mainfrm.cc:967
2035#: n:274
2036msgid "&Compass"
2037msgstr "&Компас"
2038
2039#: ../src/mainfrm.cc:968
2040#: n:275
2041msgid "C&linometer"
2042msgstr ""
2043
2044#. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2045#. corresponds to which depth, date, survey closure error, etc.
2046#: ../src/mainfrm.cc:971
2047#: n:276
2048msgid "Colour &Key"
2049msgstr ""
2050
2051#: ../src/mainfrm.cc:972
2052#: n:277
2053msgid "&Scale Bar"
2054msgstr "Лента за &мащаб"
2055
2056#: ../src/mainfrm.cc:962
2057#: n:280
2058msgid "&Reverse Sense\tCtrl+R"
2059msgstr ""
2060
2061#: ../src/mainfrm.cc:932
2062#: ../src/mainfrm.cc:964
2063#: n:281
2064msgid "&Cancel Measuring Line\tEscape"
2065msgstr ""
2066
2067#: ../src/mainfrm.cc:973
2068#: n:299
2069msgid "&Indicators"
2070msgstr "&Индикатори"
2071
2072#: ../src/z_getopt.c:697
2073#: ../src/z_getopt.c:709
2074#: n:300
2075#, c-format
2076msgid "%s: option “%s” is ambiguous\n"
2077msgstr ""
2078
2079#: ../src/z_getopt.c:1025
2080#: ../src/z_getopt.c:1036
2081#: n:301
2082#, c-format
2083msgid "%s: option “-W %s” is ambiguous\n"
2084msgstr ""
2085
2086#: ../src/z_getopt.c:753
2087#: ../src/z_getopt.c:757
2088#: n:302
2089#, c-format
2090msgid "%s: option “%c%s” doesn’t allow an argument\n"
2091msgstr ""
2092
2093#: ../src/z_getopt.c:742
2094#: ../src/z_getopt.c:745
2095#: n:303
2096#, c-format
2097msgid "%s: option “--%s” doesn’t allow an argument\n"
2098msgstr ""
2099
2100#: ../src/z_getopt.c:1060
2101#: ../src/z_getopt.c:1071
2102#: n:304
2103#, c-format
2104msgid "%s: option “-W %s” doesn’t allow an argument\n"
2105msgstr ""
2106
2107#: ../src/z_getopt.c:792
2108#: ../src/z_getopt.c:804
2109#: ../src/z_getopt.c:1091
2110#: ../src/z_getopt.c:1103
2111#: n:305
2112#, c-format
2113msgid "%s: option “%s” requires an argument\n"
2114msgstr ""
2115
2116#: ../src/z_getopt.c:962
2117#: ../src/z_getopt.c:973
2118#: ../src/z_getopt.c:1156
2119#: ../src/z_getopt.c:1168
2120#: n:306
2121#, c-format
2122msgid "%s: option requires an argument -- %c\n"
2123msgstr ""
2124
2125#: ../src/z_getopt.c:842
2126#: ../src/z_getopt.c:845
2127#: n:307
2128#, c-format
2129msgid "%s: unrecognized option “--%s”\n"
2130msgstr ""
2131
2132#: ../src/z_getopt.c:853
2133#: ../src/z_getopt.c:856
2134#: n:308
2135#, c-format
2136msgid "%s: unrecognized option “%c%s”\n"
2137msgstr ""
2138
2139#: ../src/z_getopt.c:903
2140#: ../src/z_getopt.c:906
2141#: n:309
2142#, c-format
2143msgid "%s: illegal option -- %c\n"
2144msgstr ""
2145
2146#: ../src/z_getopt.c:912
2147#: ../src/z_getopt.c:915
2148#: n:310
2149#, c-format
2150msgid "%s: invalid option -- %c\n"
2151msgstr "%s: невалидна опция -- %c\n"
2152
2153#: ../src/mainfrm.cc:878
2154#: n:311
2155msgid "&New Presentation"
2156msgstr ""
2157
2158#: ../src/mainfrm.cc:879
2159#: n:312
2160msgid "&Open Presentation…"
2161msgstr ""
2162
2163#: ../src/mainfrm.cc:880
2164#: n:313
2165msgid "&Save Presentation"
2166msgstr ""
2167
2168#: ../src/mainfrm.cc:881
2169#: n:314
2170msgid "Sa&ve Presentation As…"
2171msgstr ""
2172
2173#. TRANSLATORS: "Mark" as in "Mark this position"
2174#: ../src/mainfrm.cc:884
2175#: n:315
2176msgid "&Mark"
2177msgstr ""
2178
2179#. TRANSLATORS: "Play" as in "Play back a recording"
2180#: ../src/mainfrm.cc:886
2181#: n:316
2182msgid "Pla&y"
2183msgstr ""
2184
2185#: ../src/mainfrm.cc:887
2186#: n:317
2187msgid "&Export as Movie…"
2188msgstr ""
2189
2190#: ../src/mainfrm.cc:2499
2191#: n:331
2192msgid "Export Movie"
2193msgstr ""
2194
2195#: ../src/cavernlog.cc:511
2196#: ../src/mainfrm.cc:371
2197#: n:319
2198msgid "Select an output filename"
2199msgstr ""
2200
2201#: ../src/mainfrm.cc:368
2202#: ../src/mainfrm.cc:2421
2203#: n:320
2204msgid "Aven presentations"
2205msgstr ""
2206
2207#. TRANSLATORS: title of the save screenshot dialog
2208#: ../src/mainfrm.cc:2007
2209#: n:321
2210msgid "Save Screenshot"
2211msgstr ""
2212
2213#: ../src/mainfrm.cc:2416
2214#: ../src/mainfrm.cc:2419
2215#: n:322
2216msgid "Select a presentation to open"
2217msgstr ""
2218
2219#: ../src/mainfrm.cc:450
2220#: n:323
2221#, c-format
2222msgid "Error in format of presentation file “%s”"
2223msgstr ""
2224
2225#. TRANSLATORS: "Compass" as in Larry Fish’s cave
2226#. surveying package, so probably shouldn’t be translated
2227#: ../src/mainfrm.cc:1963
2228#: n:324
2229msgid "Compass PLT files"
2230msgstr "Compass PLT файлове"
2231
2232#. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2233#. package, so don’t translate it.
2234#: ../src/mainfrm.cc:1970
2235#: n:325
2236msgid "CMAP XYZ files"
2237msgstr "CMAP XYZ файлове"
2238
2239#. TRANSLATORS: title of message box
2240#: ../src/mainfrm.cc:2070
2241#: ../src/mainfrm.cc:2393
2242#: ../src/mainfrm.cc:2410
2243#: n:326
2244msgid "Modified Presentation"
2245msgstr ""
2246
2247#. TRANSLATORS: and the question in that box
2248#: ../src/mainfrm.cc:2068
2249#: ../src/mainfrm.cc:2392
2250#: ../src/mainfrm.cc:2409
2251#: n:327
2252msgid "The current presentation has been modified.  Abandon unsaved changes?"
2253msgstr ""
2254
2255#: ../src/mainfrm.cc:2710
2256#: ../src/mainfrm.cc:2721
2257#: n:328
2258msgid "No matches were found."
2259msgstr ""
2260
2261#. TRANSLATORS: "Find stations" button tooltip
2262#: ../src/mainfrm.cc:1048
2263#: n:332
2264msgid "Find"
2265msgstr "Търсене"
2266
2267#. TRANSLATORS: "Hide stations" button default tooltip
2268#: ../src/mainfrm.cc:1050
2269#: ../src/mainfrm.cc:2753
2270#: n:333
2271msgid "Hide"
2272msgstr "Скрий"
2273
2274#. TRANSLATORS: "Hide stations" button tooltip when stations are found
2275#: ../src/mainfrm.cc:2714
2276#: n:334
2277#, c-format
2278msgid "Hide %d found stations"
2279msgstr ""
2280
2281#: ../src/mainfrm.cc:251
2282#: ../src/mainfrm.cc:2158
2283#: ../src/mainfrm.cc:2239
2284#: ../src/mainfrm.cc:2291
2285#: n:335
2286msgid "Altitude"
2287msgstr "Надморска височина"
2288
2289#. TRANSLATORS: error if you try to drag multiple files to the aven
2290#. window
2291#: ../src/mainfrm.cc:734
2292#: n:336
2293msgid "You may only view one 3d file at a time."
2294msgstr ""
2295
2296#: ../src/mainfrm.cc:974
2297#: n:337
2298msgid "&Side Panel"
2299msgstr ""
2300
2301#. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2302#. Easting)
2303#: ../src/mainfrm.cc:2156
2304#: ../src/mainfrm.cc:2178
2305#: ../src/mainfrm.cc:2180
2306#: ../src/mainfrm.cc:2290
2307#: n:338
2308msgid "%.2f E, %.2f N"
2309msgstr ""
2310
2311#. TRANSLATORS: Used in Aven:
2312#. From <stationname>
2313#. H: 123.45m V: 234.56m
2314#. Dist: 456.78m  Brg: 200
2315#: ../src/mainfrm.cc:2198
2316#: ../src/mainfrm.cc:2248
2317#: ../src/mainfrm.cc:2310
2318#: n:339
2319#, c-format
2320msgid "From %s"
2321msgstr ""
2322
2323#. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2324#: ../src/mainfrm.cc:2323
2325#: n:340
2326#, c-format
2327msgid "H %.2f%s, V %.2f%s"
2328msgstr ""
2329
2330#. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2331#. in Compass bearing)
2332#: ../src/mainfrm.cc:2335
2333#: n:341
2334#, fuzzy, c-format
2335msgid "%s: %s, Dist %.2f%s, Brg %03d%s"
2336msgstr "%s: %s, Разстояние %.2f%s, Brd %03d%s"
2337
2338#. TRANSLATORS: tickable menu item in View menu.
2339#.
2340#. "Metric" here means metres, km, etc (rather than feet, miles, etc)
2341#: ../src/gfxcore.cc:3448
2342#: ../src/gfxcore.cc:3468
2343#: ../src/mainfrm.cc:976
2344#: n:342
2345msgid "&Metric"
2346msgstr ""
2347
2348#. TRANSLATORS: tickable menu item in View menu.
2349#.
2350#. Degrees are the angular measurement where there are 360 in a full
2351#. circle.
2352#: ../src/gfxcore.cc:3410
2353#: ../src/gfxcore.cc:3428
2354#: ../src/gfxcore.cc:3470
2355#: ../src/mainfrm.cc:977
2356#: n:343
2357msgid "&Degrees"
2358msgstr ""
2359
2360#. TRANSLATORS: tickable menu item in View menu.
2361#.
2362#. Show the tilt of the survey as a percentage gradient (100% = 45
2363#. degrees = 50 grad).
2364#: ../src/gfxcore.cc:3433
2365#: ../src/mainfrm.cc:978
2366#: n:430
2367msgid "&Percent"
2368msgstr ""
2369
2370#. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2371#. used e.g.  "5km".
2372#.
2373#. If there should be a space between the number and this, include
2374#. one in the translation.
2375#: ../src/gfxcore.cc:1188
2376#: ../src/printwx.cc:1138
2377#: n:423
2378msgid "km"
2379msgstr "км"
2380
2381#. TRANSLATORS: abbreviation for "metres" (unit of length), used
2382#. e.g. "10m".
2383#.
2384#. If there should be a space between the number and this, include
2385#. one in the translation.
2386#: ../src/commands.c:305
2387#: ../src/gfxcore.cc:1023
2388#: ../src/gfxcore.cc:1115
2389#: ../src/gfxcore.cc:1195
2390#: ../src/mainfrm.cc:2147
2391#: ../src/mainfrm.cc:2214
2392#: ../src/mainfrm.cc:2234
2393#: ../src/mainfrm.cc:2283
2394#: ../src/mainfrm.cc:2314
2395#: ../src/printwx.cc:1140
2396#: n:424
2397msgid "m"
2398msgstr "м"
2399
2400#. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2401#. used e.g.  "50cm".
2402#.
2403#. If there should be a space between the number and this, include
2404#. one in the translation.
2405#: ../src/gfxcore.cc:1203
2406#: ../src/printwx.cc:1143
2407#: n:425
2408msgid "cm"
2409msgstr "см"
2410
2411#. TRANSLATORS: abbreviation for "miles" (unit of length,
2412#. plural), used e.g.  "2 miles".
2413#.
2414#. If there should be a space between the number and this,
2415#. include one in the translation.
2416#: ../src/gfxcore.cc:1216
2417#: n:426
2418msgid " miles"
2419msgstr ""
2420
2421#. TRANSLATORS: abbreviation for "mile" (unit of length,
2422#. singular), used e.g.  "1 mile".
2423#.
2424#. If there should be a space between the number and this,
2425#. include one in the translation.
2426#: ../src/gfxcore.cc:1223
2427#: n:427
2428msgid " mile"
2429msgstr ""
2430
2431#. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2432#. as "10ft".
2433#.
2434#. If there should be a space between the number and this, include
2435#. one in the translation.
2436#: ../src/commands.c:306
2437#: ../src/gfxcore.cc:1023
2438#: ../src/gfxcore.cc:1115
2439#: ../src/gfxcore.cc:1231
2440#: ../src/mainfrm.cc:2152
2441#: ../src/mainfrm.cc:2217
2442#: ../src/mainfrm.cc:2237
2443#: ../src/mainfrm.cc:2288
2444#: ../src/mainfrm.cc:2319
2445#: n:428
2446msgid "ft"
2447msgstr "футове"
2448
2449#. TRANSLATORS: abbreviation for "inches" (unit of length), used
2450#. e.g. as "6in".
2451#.
2452#. If there should be a space between the number and this, include
2453#. one in the translation.
2454#: ../src/gfxcore.cc:1239
2455#: n:429
2456msgid "in"
2457msgstr ""
2458
2459#. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2460#: ../src/gfxcore.cc:3405
2461#: n:387
2462msgid "&Hide Compass"
2463msgstr ""
2464
2465#. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2466#: ../src/gfxcore.cc:3423
2467#: n:384
2468msgid "&Hide Clino"
2469msgstr ""
2470
2471#. TRANSLATORS: Menu item which turns off the scale bar in aven.
2472#: ../src/gfxcore.cc:3443
2473#: n:385
2474msgid "&Hide scale bar"
2475msgstr ""
2476
2477#. TRANSLATORS: Menu item which turns off the colour key.
2478#. The "Colour Key" is the thing in aven showing which colour
2479#. corresponds to which depth, date, survey closure error, etc.
2480#: ../src/gfxcore.cc:3466
2481#: n:386
2482msgid "&Hide colour key"
2483msgstr ""
2484
2485#. TRANSLATORS: degree symbol - probably should be translated to
2486#. itself.
2487#: ../src/commands.c:308
2488#: ../src/gfxcore.cc:698
2489#: ../src/gfxcore.cc:773
2490#: ../src/gfxcore.cc:1087
2491#: ../src/mainfrm.cc:2201
2492#: ../src/mainfrm.cc:2327
2493#: ../src/printwx.cc:89
2494#: n:344
2495msgid "°"
2496msgstr "°"
2497
2498#. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2499#. circle).
2500#: ../src/commands.c:309
2501#: ../src/gfxcore.cc:703
2502#: ../src/gfxcore.cc:778
2503#: ../src/gfxcore.cc:1087
2504#: n:76
2505msgid "ᵍ"
2506msgstr "ᵍ"
2507
2508#. TRANSLATORS: alternative angle units (400 grad = 360 degrees =
2509#. full circle).  Try to make this as short as sensibly possible.
2510#.
2511#. E.g. in Italian and Spanish we use "g.cent." rather than
2512#. "gradi quattrocentesimali"/"grados centesimales"
2513#: ../src/mainfrm.cc:2209
2514#: ../src/mainfrm.cc:2330
2515#: n:345
2516msgid "grad"
2517msgstr "град"
2518
2519#. TRANSLATORS: symbol for percentage gradient (100% = 45
2520#. degrees = 50 grad).
2521#: ../src/commands.c:310
2522#: ../src/gfxcore.cc:764
2523#: ../src/gfxcore.cc:782
2524#: n:96
2525msgid "%"
2526msgstr "%"
2527
2528#. TRANSLATORS: infinity symbol - used for the percentage gradient on
2529#. vertical angles.
2530#: ../src/gfxcore.cc:758
2531#: n:431
2532msgid "∞"
2533msgstr "∞"
2534
2535#. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2536#. in Compass bearing)
2537#: ../src/mainfrm.cc:2221
2538#: n:374
2539#, c-format
2540msgid "%s: H %.2f%s, Brg %03d%s"
2541msgstr ""
2542
2543#. TRANSLATORS: "V" is short for "Vertical"
2544#: ../src/mainfrm.cc:2254
2545#: n:375
2546#, c-format
2547msgid "%s: V %.2f%s"
2548msgstr ""
2549
2550#. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2551#. tree hierarchy of survey station names
2552#: ../src/mainfrm.cc:1098
2553#: n:376
2554msgid "Surveys"
2555msgstr ""
2556
2557#: ../src/mainfrm.cc:1099
2558#: n:377
2559msgid "Presentation"
2560msgstr "Презентация"
2561
2562#: ../src/mainfrm.cc:249
2563#: n:378
2564msgid "Easting"
2565msgstr "изток"
2566
2567#: ../src/mainfrm.cc:250
2568#: n:379
2569msgid "Northing"
2570msgstr "север"
2571
2572#. TRANSLATORS: Aven menu items.  An “&” goes before the letter of any
2573#. accelerator key.
2574#.
2575#. The string "\t" separates the menu text and any accelerator key.
2576#.
2577#. "File" menu.  The accelerators must be different within this group.
2578#. c.f. 201, 380, 381.
2579#: ../src/mainfrm.cc:803
2580#: n:220
2581msgid "&Open…\tCtrl+O"
2582msgstr "&Отвори…\tCtrl+O"
2583
2584#: ../src/mainfrm.cc:804
2585#: n:144
2586msgid "Show &Log"
2587msgstr ""
2588
2589#: ../src/mainfrm.cc:807
2590#: n:380
2591msgid "&Print…\tCtrl+P"
2592msgstr "&Принтиране…\tCtrl+P"
2593
2594#: ../src/mainfrm.cc:808
2595#: n:381
2596msgid "P&age Setup…"
2597msgstr ""
2598
2599#. TRANSLATORS: In the "File" menu
2600#: ../src/mainfrm.cc:811
2601#: n:201
2602msgid "&Screenshot…"
2603msgstr "&Снимка на екрана…"
2604
2605#: ../src/mainfrm.cc:812
2606#: n:382
2607msgid "&Export as…"
2608msgstr ""
2609
2610#. TRANSLATORS: Title of file dialog to choose name and type of exported
2611#. file.
2612#: ../src/printwx.cc:673
2613#: n:401
2614msgid "Export as:"
2615msgstr ""
2616
2617#. TRANSLATORS: Title of the export
2618#. dialog
2619#: ../src/printwx.cc:346
2620#: n:383
2621msgid "Export"
2622msgstr "Експорт"
2623
2624#. TRANSLATORS: for about box:
2625#: ../src/aboutdlg.cc:142
2626#: n:390
2627msgid "System Information:"
2628msgstr ""
2629
2630#. TRANSLATORS: Title of the print preview dialog
2631#: ../src/printwx.cc:710
2632#: n:398
2633msgid "Print Preview"
2634msgstr "Предпечатен преглед"
2635
2636#. TRANSLATORS: Title of the print
2637#. dialog
2638#: ../src/printwx.cc:343
2639#: n:399
2640msgid "Print"
2641msgstr "Принтиране"
2642
2643#: ../src/printwx.cc:621
2644#: n:400
2645msgid "&Print…"
2646msgstr "&Принтиране…"
2647
2648#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2649#. "survey stations".
2650#: ../src/printwx.cc:505
2651#: n:403
2652msgid "Sur&face Survey Legs"
2653msgstr ""
2654
2655#. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2656#: ../src/mainfrm.cc:136
2657#: n:404
2658msgid "Edit Waypoint"
2659msgstr ""
2660
2661#. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2662#. in a presentation.
2663#: ../src/mainfrm.cc:175
2664#: n:278
2665msgid " (unused in perspective view)"
2666msgstr ""
2667
2668#. TRANSLATORS: Field label in dialog to edit a waypoint in a
2669#. presentation.
2670#: ../src/mainfrm.cc:182
2671#: n:279
2672msgid "Time: "
2673msgstr ""
2674
2675#. TRANSLATORS: units+info after time field in dialog to edit a
2676#. waypoint in a presentation.
2677#: ../src/mainfrm.cc:186
2678#: n:282
2679#, fuzzy
2680msgid " secs (0 = auto; *6 = 6 times auto)"
2681msgstr " сек. (0 = auto; *6 = 6 times auto)"
2682
2683#. TRANSLATORS: %s will be replaced with "Aven" currently (and
2684#. perhaps by "Survex" or other things in future).
2685#: ../src/aven.cc:230
2686#: n:405
2687#, c-format
2688msgid "This version of %s requires OpenGL to work, but it isn’t available."
2689msgstr ""
2690
2691#: ../src/readval.c:341
2692#: n:392
2693msgid "Separator in survey name"
2694msgstr ""
2695
2696#. TRANSLATORS: Used in place of the station name when talking about an
2697#. anonymous station.
2698#: ../src/labelinfo.h:82
2699#: n:56
2700msgid "anonymous station"
2701msgstr ""
2702
2703#: ../src/readval.c:124
2704#: ../src/readval.c:139
2705#: ../src/readval.c:156
2706#: n:3
2707msgid "Can't have a leg between two anonymous stations"
2708msgstr ""
2709
2710#: ../src/mainfrm.cc:917
2711#: n:406
2712msgid "Spla&y Legs"
2713msgstr ""
2714
2715#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
2716#. splay legs are not shown.
2717#: ../src/mainfrm.cc:909
2718#: n:407
2719msgid "&Hide"
2720msgstr "&Скриване"
2721
2722#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
2723#. aven will show splay legs with less bright colours (rather than the
2724#. same as other legs "Show" or not shown "Hide").
2725#: ../src/mainfrm.cc:913
2726#: n:408
2727msgid "&Fade"
2728msgstr "&Избледняване"
2729
2730#. TRANSLATORS: Item in the "Splay Legs" submenu - if this is selected,
2731#. splay legs are shown the same as other legs.
2732#: ../src/mainfrm.cc:916
2733#: n:409
2734msgid "&Show"
2735msgstr "&Показване"
2736
2737#: ../src/extend.c:507
2738#: n:105
2739msgid "Reading in data - please wait…"
2740msgstr ""
2741
2742#. TRANSLATORS: for extend: the user specified breaking a loop or
2743#. changing extend direction at this station, but we didn’t find it in
2744#. the 3d file
2745#: ../src/extend.c:263
2746#: ../src/extend.c:281
2747#: ../src/extend.c:326
2748#: ../src/extend.c:368
2749#: ../src/extend.c:410
2750#: n:510
2751#, c-format
2752msgid "Failed to find station %s"
2753msgstr ""
2754
2755#. TRANSLATORS: for extend: the user specified breaking a loop or
2756#. changing extend direction at this leg, but we didn’t find it in the
2757#. 3d file
2758#: ../src/extend.c:307
2759#: ../src/extend.c:349
2760#: ../src/extend.c:391
2761#: ../src/extend.c:433
2762#: n:511
2763#, c-format
2764msgid "Failed to find leg %s → %s"
2765msgstr ""
2766
2767#. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
2768#: ../src/extend.c:254
2769#: n:512
2770#, c-format
2771msgid "Starting from station %s"
2772msgstr ""
2773
2774#. TRANSLATORS: for extend:
2775#: ../src/extend.c:274
2776#: n:513
2777#, c-format
2778msgid "Extending to the left from station %s"
2779msgstr ""
2780
2781#. TRANSLATORS: for extend:
2782#: ../src/extend.c:319
2783#: n:514
2784#, c-format
2785msgid "Extending to the right from station %s"
2786msgstr ""
2787
2788#. TRANSLATORS: for extend:
2789#: ../src/extend.c:294
2790#: n:515
2791#, c-format
2792msgid "Extending to the left from leg %s → %s"
2793msgstr ""
2794
2795#. TRANSLATORS: for extend:
2796#: ../src/extend.c:339
2797#: n:516
2798#, c-format
2799msgid "Extending to the right from leg %s → %s"
2800msgstr ""
2801
2802#. TRANSLATORS: for extend:
2803#: ../src/extend.c:403
2804#: n:517
2805#, c-format
2806msgid "Breaking survey loop at station %s"
2807msgstr ""
2808
2809#. TRANSLATORS: for extend:
2810#: ../src/extend.c:423
2811#: n:518
2812#, c-format
2813msgid "Breaking survey loop at leg %s → %s"
2814msgstr ""
2815
2816#. TRANSLATORS: for extend:
2817#: ../src/extend.c:361
2818#: n:519
2819#, c-format
2820msgid "Swapping extend direction from station %s"
2821msgstr ""
2822
2823#. TRANSLATORS: for extend:
2824#: ../src/extend.c:381
2825#: n:520
2826#, c-format
2827msgid "Swapping extend direction from leg %s → %s"
2828msgstr ""
2829
2830#. TRANSLATORS: for extend:
2831#: ../src/extend.c:551
2832#: n:521
2833#, c-format
2834msgid "Applying specfile: “%s”"
2835msgstr ""
2836
2837#. TRANSLATORS: for extend:
2838#. Used to tell the user that a file is being written - %s is the filename
2839#: ../src/extend.c:614
2840#: n:522
2841#, c-format
2842msgid "Writing %s…"
2843msgstr ""
2844
2845#. TRANSLATORS: --help output for sorterr --horizontal option
2846#: ../src/sorterr.c:53
2847#: n:179
2848msgid "sort by horizontal error factor"
2849msgstr ""
2850
2851#. TRANSLATORS: --help output for sorterr --vertical option
2852#: ../src/sorterr.c:55
2853#: n:180
2854msgid "sort by vertical error factor"
2855msgstr ""
2856
2857#. TRANSLATORS: --help output for sorterr --percentage option
2858#: ../src/sorterr.c:57
2859#: n:181
2860msgid "sort by percentage error"
2861msgstr ""
2862
2863#. TRANSLATORS: --help output for sorterr --per-leg option
2864#: ../src/sorterr.c:59
2865#: n:182
2866msgid "sort by error per leg"
2867msgstr ""
2868
2869#. TRANSLATORS: --help output for sorterr --replace option
2870#: ../src/sorterr.c:61
2871#: n:183
2872msgid "replace .err file with resorted version"
2873msgstr ""
2874
2875#: ../src/sorterr.c:81
2876#: ../src/sorterr.c:98
2877#: ../src/sorterr.c:170
2878#: n:112
2879msgid "Couldn’t parse .err file"
2880msgstr ""
2881
2882#. TRANSLATORS: for diffpos:
2883#: ../src/diffpos.c:159
2884#: n:500
2885#, c-format
2886msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2887msgstr ""
2888
2889#. TRANSLATORS: for diffpos:
2890#: ../src/diffpos.c:196
2891#: n:501
2892#, c-format
2893msgid "Added: %s"
2894msgstr ""
2895
2896#. TRANSLATORS: for diffpos:
2897#: ../src/diffpos.c:219
2898#: n:502
2899#, c-format
2900msgid "Deleted: %s"
2901msgstr ""
2902
2903#. TRANSLATORS: Program will exit shortly after printing this
2904#: ../src/message.c:227
2905#: n:90
2906msgid "Abnormal termination"
2907msgstr ""
2908
2909#: ../src/message.c:228
2910#: n:91
2911msgid "Arithmetic error"
2912msgstr ""
2913
2914#. TRANSLATORS: Something is badly wrong -- the CPU tried to execute bad
2915#. opcodes -- corrupted program?
2916#: ../src/message.c:231
2917#: n:92
2918msgid "Illegal instruction"
2919msgstr "Незаконна инструкция"
2920
2921#: ../src/message.c:232
2922#: n:94
2923msgid "Bad memory access"
2924msgstr ""
2925
2926#: ../src/message.c:233
2927#: n:97
2928msgid "Unknown signal received"
2929msgstr ""
2930
2931#. TRANSLATORS: e.g.
2932#.
2933#. *begin crawl
2934#. 1 2 9.45 234 -01
2935#. *end crawl
2936#. *begin crawl    # <- warning here
2937#. 2 3 7.67 223 -03
2938#. *end crawl
2939#.
2940#. If you're unsure what "deprecated" means, see:
2941#. http://en.wikipedia.org/wiki/Deprecation
2942#: ../src/commands.c:566
2943#: n:29
2944msgid "Reentering an existing survey is deprecated"
2945msgstr ""
2946
2947#: ../src/commands.c:567
2948#: n:30
2949msgid "Originally entered here"
2950msgstr ""
2951
2952#. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
2953#. deprecated, so this error would be generated by:
2954#.
2955#. *equate \foo.7 1
2956#.
2957#. If you're unsure what "deprecated" means, see:
2958#. http://en.wikipedia.org/wiki/Deprecation
2959#: ../src/commands.c:492
2960#: ../src/readval.c:90
2961#: ../src/readval.c:94
2962#: n:25
2963msgid "ROOT is deprecated"
2964msgstr ""
2965
2966#. TRANSLATORS: --help output for dump3d --rewind option
2967#: ../src/dump3d.c:51
2968#: n:204
2969msgid "rewind file and read it a second time"
2970msgstr ""
2971
2972#: ../src/dump3d.c:52
2973#: n:396
2974msgid "show survey date information (if present)"
2975msgstr ""
2976
2977#: ../src/findentrances.cc:100
2978#: ../src/gpx.cc:70
2979#: ../src/kml.cc:69
2980#: n:287
2981#, c-format
2982msgid "Failed to initialise input coordinate system “%s”"
2983msgstr ""
2984
2985#: ../src/findentrances.cc:103
2986#: ../src/gpx.cc:75
2987#: ../src/kml.cc:74
2988#: n:288
2989#, c-format
2990msgid "Failed to initialise output coordinate system “%s”"
2991msgstr ""
2992
2993#: ../src/findentrances.cc:158
2994#: n:388
2995msgid "-d PROJ_DATUM 3D_FILE"
2996msgstr ""
2997
2998#. TRANSLATORS: The PROJ library is used to do coordinate transformations
2999#. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
3000#. what the input datum is.
3001#: ../src/findentrances.cc:149
3002#: n:389
3003msgid "input datum as string to pass to PROJ"
3004msgstr ""
3005
3006#. TRANSLATORS: The PROJ library is used to do coordinate transformations
3007#. (https://trac.osgeo.org/proj/) - if the .3d file doesn't contain details
3008#. of the coordinate projection in use, the user must specify it here for
3009#. export formats which need to know it (e.g. GPX).
3010#: ../src/printwx.cc:582
3011#: n:440
3012msgid "Coordinate projection"
3013msgstr ""
3014
3015#: ../src/cad3d.c:661
3016#: n:100
3017msgid "do not generate station markers"
3018msgstr ""
3019
3020#: ../src/cad3d.c:662
3021#: n:101
3022msgid "do not generate station labels"
3023msgstr ""
3024
3025#: ../src/cad3d.c:663
3026#: n:102
3027msgid "do not generate survey legs"
3028msgstr ""
3029
3030#: ../src/cad3d.c:667
3031#: n:103
3032msgid "produce an elevation view"
3033msgstr ""
3034
3035#: ../src/cad3d.c:664
3036#: n:148
3037#, c-format
3038msgid "generate grid (default %sm)"
3039msgstr ""
3040
3041#: ../src/cad3d.c:665
3042#: n:149
3043#, c-format
3044msgid "station labels text height (default %s)"
3045msgstr ""
3046
3047#: ../src/cad3d.c:666
3048#: n:152
3049#, c-format
3050msgid "station marker size (default %s)"
3051msgstr ""
3052
3053#: ../src/cad3d.c:668
3054#: n:155
3055#, c-format
3056msgid "factor to scale down by (default %s)"
3057msgstr ""
3058
3059#: ../src/cad3d.c:669
3060#: n:156
3061msgid "produce DXF output"
3062msgstr ""
3063
3064#. TRANSLATORS: "Skencil" is the name of a software package, so should not be
3065#. translated.
3066#: ../src/cad3d.c:672
3067#: n:158
3068msgid "produce Skencil output"
3069msgstr ""
3070
3071#. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
3072#. so should not be translated.
3073#: ../src/cad3d.c:675
3074#: n:159
3075msgid "produce Compass PLT output for Carto"
3076msgstr ""
3077
3078#: ../src/cad3d.c:676
3079#: n:160
3080msgid "produce SVG output"
3081msgstr ""
3082
3083#, c-format
3084#~ msgid "Error in format of font file “%s”"
3085#~ msgstr ""
3086
3087#. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a grid of
3088#. height values).
3089#~ msgid "Select a terrain file to view"
3090#~ msgstr ""
3091
3092#~ msgid "Terrain files"
3093#~ msgstr ""
3094
3095#~ msgid "Open &Terrain…"
3096#~ msgstr ""
3097
3098#~ msgid "Solid Su&rface"
3099#~ msgstr ""
3100
3101#. TRANSLATORS: number of stations found matching search
3102#, c-format
3103#~ msgid "%d found"
3104#~ msgstr ""
3105
3106#: ../src/mainfrm.cc:957
3107#: n:347
3108#~ msgid "&Preferences…"
3109#~ msgstr "&Настройки…"
3110
3111#: n:348
3112#~ msgid "Draw passage walls"
3113#~ msgstr ""
3114
3115#: n:349
3116#~ msgid "Estimate LRUD readings based on heuristics"
3117#~ msgstr ""
3118
3119#: n:350
3120#~ msgid "Mark survey stations with crosses"
3121#~ msgstr ""
3122
3123#: n:351
3124#~ msgid "Highlight stations marked as entrances"
3125#~ msgstr ""
3126
3127#: n:352
3128#~ msgid "Highlight stations marked as fixed points"
3129#~ msgstr ""
3130
3131#: n:353
3132#~ msgid "Highlight stations which are exported"
3133#~ msgstr ""
3134
3135#: n:354
3136#~ msgid "Mark survey stations with their names"
3137#~ msgstr ""
3138
3139#: n:355
3140#~ msgid "Allow names to overlap on the display (faster)"
3141#~ msgstr ""
3142
3143#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3144#. "survey stations".
3145#: n:357
3146#~ msgid "Display underground survey legs"
3147#~ msgstr ""
3148
3149#. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3150#. "survey stations".
3151#: n:358
3152#~ msgid "Display surface survey legs"
3153#~ msgstr ""
3154
3155#: n:359
3156#~ msgid "Colour surface surveys by depth"
3157#~ msgstr ""
3158
3159#: n:360
3160#~ msgid "Draw surface legs with dashed lines"
3161#~ msgstr ""
3162
3163#: n:361
3164#~ msgid "Draw a grid"
3165#~ msgstr ""
3166
3167#: n:362
3168#~ msgid "metric units"
3169#~ msgstr ""
3170
3171#. TRANSLATORS: Miles, Feet, Inches, etc.  What they call "English units" in
3172#. the USA (rather confusingly now that England has largely gone metric!)
3173#: n:363
3174#~ msgid "imperial units"
3175#~ msgstr ""
3176
3177#. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
3178#. full circle.
3179#: n:364
3180#~ msgid "degrees (°)"
3181#~ msgstr ""
3182
3183#. TRANSLATORS: Grads are the angular measurement where there are 400 in a
3184#. full circle.
3185#: n:365
3186#~ msgid "grads"
3187#~ msgstr ""
3188
3189#: n:366
3190#~ msgid "Display measurements in"
3191#~ msgstr ""
3192
3193#: n:367
3194#~ msgid "Display angles in"
3195#~ msgstr ""
3196
3197#. TRANSLATORS: reverses the sense of the mouse controls
3198#: n:368
3199#~ msgid "Reverse the sense of the controls"
3200#~ msgstr ""
3201
3202#: n:369
3203#~ msgid "Display scale bar"
3204#~ msgstr ""
3205
3206#: n:370
3207#~ msgid "Display depth bar"
3208#~ msgstr ""
3209
3210#: n:371
3211#~ msgid "Display compass"
3212#~ msgstr ""
3213
3214#: n:372
3215#~ msgid "Display clinometer"
3216#~ msgstr ""
3217
3218#: n:373
3219#~ msgid "Display side panel"
3220#~ msgstr ""
Note: See TracBrowser for help on using the repository browser.