source: git/lib/ChineseTraditional.isl

Last change on this file was 9990aab, checked in by Olly Betts <olly@…>, 2 years ago

Update Innosetup config for Innosetup 6.2.0

Most notably, the installer should now support installing as a
non-admin user.

  • Property mode set to 100644
File size: 19.5 KB
Line 
1; *** Inno Setup version 6.1.0+ Chinese Traditional messages ***
2; Name: Enfong Tsao, nelson22768384@gmail.com
3; Based on 5.5.3+ translations by Samuel Lee, Email: 751555749@qq.com
4; Translation based on network resource
5;
6; Note: When translating this text, do not add periods (.) to the end of
7; messages that didn't have them already, because on those messages Inno
8; Setup adds the periods automatically (appending a period would result in
9; two periods being displayed).
10
11[LangOptions]
12; The following three entries are very important. Be sure to read and
13; understand the '[LangOptions] section' topic in the help file.
14LanguageName=<7e41><9ad4><4e2d><6587>
15LanguageID=$0404
16LanguageCodepage=950
17; If the language you are translating to requires special font faces or
18; sizes, uncomment any of the following entries and change them accordingly.
19;DialogFontName=
20;DialogFontSize=8
21;TitleFontName=Arial
22;TitleFontSize=29
23;WelcomeFontName=Verdana
24;WelcomeFontSize=12
25;CopyrightFontName=Arial
26;CopyrightFontSize=8
27
28[Messages]
29
30; *** Application titles
31SetupAppTitle=安裝程式
32SetupWindowTitle=%1 安裝程式
33UninstallAppTitle=解除安裝
34UninstallAppFullTitle=解除安裝 %1
35
36; *** Misc. common
37InformationTitle=訊息
38ConfirmTitle=確認
39ErrorTitle=錯誤
40
41; *** SetupLdr messages
42SetupLdrStartupMessage=這將會安裝 %1。您想要繼續嗎?
43LdrCannotCreateTemp=無法建立暫存檔案。安裝程式將會結束。
44LdrCannotExecTemp=無法執行暫存檔案。安裝程式將會結束。
45HelpTextNote=
46
47; *** Startup error messages
48LastErrorMessage=%1%n%n錯誤 %2: %3
49SetupFileMissing=安裝資料夾中遺失檔案 %1。請修正此問題或重新取得此軟體。
50SetupFileCorrupt=安裝檔案已經損毀。請重新取得此軟體。
51SetupFileCorruptOrWrongVer=安裝檔案已經損毀,或與安裝程式的版本不符。請重新取得此軟體。
52InvalidParameter=某個無效的變量已被傳遞到了命令列:%n%n%1
53SetupAlreadyRunning=安裝程式已經在執行。
54WindowsVersionNotSupported=本安裝程式並不支援目前在電腦所運行的 Windows 版本。
55WindowsServicePackRequired=本安裝程式需要 %1 Service Pack %2 或更新。
56NotOnThisPlatform=這個程式無法在 %1 執行。
57OnlyOnThisPlatform=這個程式必須在 %1 執行。
58OnlyOnTheseArchitectures=這個程式只能在專門為以下處理器架構而設計的 Windows 上安裝:%n%n%1
59WinVersionTooLowError=這個程式必須在 %1 版本 %2 或以上的系統執行。
60WinVersionTooHighError=這個程式無法安裝在 %1 版本 %2 或以上的系統。
61AdminPrivilegesRequired=您必須登入成系統管理員以安裝這個程式。
62PowerUserPrivilegesRequired=您必須登入成具有系統管理員或 Power User 權限的使用者以安裝這個程式。
63SetupAppRunningError=安裝程式偵測到 %1 正在執行。%n%n請關閉該程式後按 「確定」 繼續,或按 「取消」 離開。
64UninstallAppRunningError=解除安裝程式偵測到 %1 正在執行。%n%n請關閉該程式後按 「確定」 繼續,或按 「取消」 離開。
65
66; *** Startup questions
67PrivilegesRequiredOverrideTitle=選擇安裝程式安裝模式
68PrivilegesRequiredOverrideInstruction=選擇安裝模式
69PrivilegesRequiredOverrideText1=可以為所有使用者安裝 %1 (需要系統管理權限),或是僅為您安裝。
70PrivilegesRequiredOverrideText2=可以僅為您安裝 %1,或是為所有使用者安裝 (需要系統管理權限)。
71PrivilegesRequiredOverrideAllUsers=為所有使用者安裝 (&A)
72PrivilegesRequiredOverrideAllUsersRecommended=為所有使用者安裝 (建議選項) (&A)
73PrivilegesRequiredOverrideCurrentUser=僅為我安裝 (&M)
74PrivilegesRequiredOverrideCurrentUserRecommended=僅為我安裝 (建議選項) (&M)
75
76; *** Misc. errors
77ErrorCreatingDir=安裝程式無法建立資料夾“%1”。
78ErrorTooManyFilesInDir=無法在資料夾“%1”內建立檔案,因為資料夾內有太多的檔案。
79
80; *** Setup common messages
81ExitSetupTitle=結束安裝程式
82ExitSetupMessage=安裝尚未完成。如果您現在結束安裝程式,這個程式將不會被安裝。%n%n您可以稍後再執行安裝程式以完成安裝程序。您現在要結束安裝程式嗎?
83AboutSetupMenuItem=關於安裝程式 (&A)...
84AboutSetupTitle=關於安裝程式
85AboutSetupMessage=%1 版本 %2%n%3%n%n%1 網址:%n%4
86AboutSetupNote=
87TranslatorNote=
88
89; *** Buttons
90ButtonBack=< 上一步(&B)
91ButtonInstall=安裝(&I)
92ButtonNext=下一步(&N)  >
93ButtonOK=確定
94ButtonCancel=取消
95ButtonYes=是(&Y)
96ButtonYesToAll=全部皆是 (&A)
97ButtonNo=否(&N)
98ButtonNoToAll=全部皆否 (&O)
99ButtonFinish=完成 (&F)
100ButtonBrowse=瀏覽 (&B)...
101ButtonWizardBrowse=瀏覽 (&R)...
102ButtonNewFolder=建立新資料夾 (&M)
103
104; *** "Select Language" dialog messages
105SelectLanguageTitle=選擇安裝語言
106SelectLanguageLabel=選擇在安裝過程中使用的語言:
107
108; *** Common wizard text
109ClickNext=按 「下一步」 繼續安裝,或按 「取消」 結束安裝程式。
110BeveledLabel=
111BrowseDialogTitle=瀏覽資料夾
112BrowseDialogLabel=在下面的資料夾列表中選擇一個資料夾,然後按 「確定」。
113NewFolderName=新資料夾
114
115; *** "Welcome" wizard page
116WelcomeLabel1=歡迎使用 [name] 安裝程式
117WelcomeLabel2=這個安裝程式將會安裝 [name/ver] 到您的電腦。%n%n我們強烈建議您在安裝過程中關閉其它的應用程式,以避免與安裝程式發生沖突。
118
119; *** "Password" wizard page
120WizardPassword=密碼
121PasswordLabel1=這個安裝程式具有密碼保護。
122PasswordLabel3=請輸入密碼,然後按 「下一步」 繼續。密碼是區分大小寫的。
123PasswordEditLabel=密碼 (&P):
124IncorrectPassword=您輸入的密碼不正確,請重新輸入。
125
126; *** "License Agreement" wizard page
127WizardLicense=授權合約
128LicenseLabel=請閱讀以下授權合約。
129LicenseLabel3=請閱讀以下授權合約,您必須接受合約的各項條款才能繼續安裝。
130LicenseAccepted=我同意 (&A)
131LicenseNotAccepted=我不同意 (&D)
132
133; *** "Information" wizard pages
134WizardInfoBefore=訊息
135InfoBeforeLabel=在繼續安裝之前請閱讀以下重要資訊。
136InfoBeforeClickLabel=當您準備好繼續安裝,請按 「下一步」。
137WizardInfoAfter=訊息
138InfoAfterLabel=在繼續安裝之前請閱讀以下重要資訊。
139InfoAfterClickLabel=當您準備好繼續安裝,請按 「下一步」。
140
141; *** "User Information" wizard page
142WizardUserInfo=使用者資訊
143UserInfoDesc=請輸入您的資料。
144UserInfoName=使用者名稱(&U):
145UserInfoOrg=組織(&O):
146UserInfoSerial=序號(&S):
147UserInfoNameRequired=您必須輸入您的名稱。
148
149; *** "Select Destination Location" wizard page
150WizardSelectDir=選擇目的資料夾
151SelectDirDesc=選擇安裝程式安裝 [name] 的位置。
152SelectDirLabel3=安裝程式將會把 [name] 安裝到下面的資料夾。
153SelectDirBrowseLabel=按 「下一步」 繼續,如果您想選擇另一個資料夾,請按 「瀏覽」。
154DiskSpaceGBLabel=最少需要 [gb] GB 磁碟空間。
155DiskSpaceMBLabel=最少需要 [mb] MB 磁碟空間。
156CannotInstallToNetworkDrive=安裝程式無法安裝於網絡磁碟機。
157CannotInstallToUNCPath=安裝程式無法安裝於 UNC 路徑。
158InvalidPath=您必須輸入完整的路徑名稱及磁碟機代碼。%n%n例如 C:\App 或 UNC 路徑格式 \\伺服器\共用資料夾。
159InvalidDrive=您選取的磁碟機或 UNC 名稱不存在或無法存取,請選擇其他的目的地。
160DiskSpaceWarningTitle=磁碟空間不足
161DiskSpaceWarning=安裝程式需要至少 %1 KB 的磁碟空間,您所選取的磁碟只有 %2 KB 可用空間。%n%n您要繼續安裝嗎?
162DirNameTooLong=資料夾名稱或路徑太長。
163InvalidDirName=資料夾名稱不正確。
164BadDirName32=資料夾名稱不得包含以下特殊字元:%n%n%1
165DirExistsTitle=資料夾已經存在
166DirExists=資料夾:%n%n%1%n%n 已經存在。仍要安裝到該資料夾嗎?
167DirDoesntExistTitle=資料夾不存在
168DirDoesntExist=資料夾:%n%n%1%n%n 不存在。要建立該資料夾嗎?
169
170; *** "Select Components" wizard page
171WizardSelectComponents=選擇元件
172SelectComponentsDesc=選擇將會被安裝的元件。
173SelectComponentsLabel2=選擇您想要安裝的元件;清除您不想安裝的元件。然後按 「下一步」 繼續安裝。
174FullInstallation=完整安裝
175; if possible don't translate 'Compact' as 'Minimal' (I mean 'Minimal' in your language)
176CompactInstallation=最小安裝
177CustomInstallation=自訂安裝
178NoUninstallWarningTitle=元件已存在
179NoUninstallWarning=安裝程式偵測到以下元件已經安裝在您的電腦上:%n%n%1%n%n取消選擇這些元件將不會移除它們。%n%n您仍然要繼續嗎?
180ComponentSize1=%1 KB
181ComponentSize2=%1 MB
182ComponentsDiskSpaceGBLabel=目前的選擇需要至少 [gb] GB 磁碟空間。
183ComponentsDiskSpaceMBLabel=目前的選擇需要至少 [mb] MB 磁碟空間。
184
185; *** "Select Additional Tasks" wizard page
186WizardSelectTasks=選擇附加的工作
187SelectTasksDesc=選擇要執行的附加工作。
188SelectTasksLabel2=選擇安裝程式在安裝 [name] 時要執行的附加工作,然後按 「下一步」。
189
190; *** "Select Start Menu Folder" wizard page
191WizardSelectProgramGroup=選擇「開始」功能表的資料夾
192SelectStartMenuFolderDesc=選擇安裝程式建立程式的捷徑的位置。
193SelectStartMenuFolderLabel3=安裝程式將會把程式的捷徑建立在下面的「開始」功能表資料夾。
194SelectStartMenuFolderBrowseLabel=按 「下一步」 繼續,如果您想選擇另一個資料夾,請按 「瀏覽」。
195MustEnterGroupName=您必須輸入一個資料夾的名稱。
196GroupNameTooLong=資料夾名稱或路徑太長。
197InvalidGroupName=資料夾名稱不正確。
198BadGroupName=資料夾名稱不得包含下列字元:%n%n%1
199NoProgramGroupCheck2=不要在「開始」功能表中建立資料夾 (&D)
200
201; *** "Ready to Install" wizard page
202WizardReady=準備安裝
203ReadyLabel1=安裝程式將開始安裝 [name] 到您的電腦中。
204ReadyLabel2a=按下 「安裝」 繼續安裝,或按 「上一步」 重新檢視或設定各選項的內容。
205ReadyLabel2b=按下 「安裝」 繼續安裝。
206ReadyMemoUserInfo=使用者資訊
207ReadyMemoDir=目的資料夾:
208ReadyMemoType=安裝型態:
209ReadyMemoComponents=選擇的元件:
210ReadyMemoGroup=「開始」功能表資料夾:
211ReadyMemoTasks=附加工作:
212
213; *** TDownloadWizardPage wizard page and DownloadTemporaryFile
214DownloadingLabel=正在下載額外檔案...
215ButtonStopDownload=停止下載 (&S)
216StopDownload=您確定要停止下載嗎?
217ErrorDownloadAborted=已停止下載
218ErrorDownloadFailed=下載失敗: %1 %2
219ErrorDownloadSizeFailed=取得檔案大小失敗: %1 %2
220ErrorFileHash1=檔案雜湊失敗: %1
221ErrorFileHash2=檔案雜湊無效: 必須為 %1,收到 %2
222ErrorProgress=進度無效: %1 之 %2
223ErrorFileSize=檔案大小無效: 必須為 %1,收到 %2
224
225; *** "Preparing to Install" wizard page
226WizardPreparing=準備安裝程式
227PreparingDesc=安裝程式準備將 [name] 安裝到您的電腦上。
228PreviousInstallNotCompleted=先前的安裝/ 解除安裝尚未完成,您必須重新啟動電腦以完成該安裝。%n%n在重新啟動電腦之後,請再執行這個程式來安裝 [name]。
229CannotContinue=安裝程式無法繼續。請按 「取消」 離開。
230ApplicationsFound=下面的應用程式正在使用安裝程式所需要更新的檔案。建議您允許安裝程式自動關閉這些應用程式。
231ApplicationsFound2=下面的應用程式正在使用安裝程式所需要更新的檔案。建議您允許安裝程式自動關閉這些應用程式。當安裝過程結束後,本安裝程式將會嘗試重新開啟該應用程式。
232CloseApplications=關閉應用程式 (&A)
233DontCloseApplications=不要關閉應用程式 (&D)
234ErrorCloseApplications=安裝程式無法自動關閉所有應用程式。建議您在繼續前先關閉所有應用程式使用的檔案。
235PrepareToInstallNeedsRestart=安裝程式必須重新啟動您的電腦。重新啟動後,請再次執行安裝程式以完成 [name] 的安裝。%n%n您想要現在重新啟動電腦嗎?
236
237; *** "Installing" wizard page
238WizardInstalling=正在安裝
239InstallingLabel=請稍候,安裝程式正在將 [name] 安裝到您的電腦上
240
241; *** "Setup Completed" wizard page
242FinishedHeadingLabel=安裝完成
243FinishedLabelNoIcons=安裝程式已經將 [name] 安裝在您的電腦上。
244FinishedLabel=安裝程式已經將 [name] 安裝在您的電腦中,您可以選擇程式的圖示來執行該應用程式。
245ClickFinish=按 「完成」 以結束安裝程式。
246FinishedRestartLabel=要完成 [name] 的安裝,安裝程式必須重新啟動您的電腦。您想要現在重新啟動電腦嗎?
247FinishedRestartMessage=要完成 [name] 的安裝,安裝程式必須重新啟動您的電腦。%n%n您想要現在重新啟動電腦嗎?
248ShowReadmeCheck=是,我要閱讀讀我檔案。
249YesRadio=是,立即重新啟動電腦(&Y)
250NoRadio=否,我稍後重新啟動電腦(&N)
251; used for example as 'Run MyProg.exe'
252RunEntryExec=執行 %1
253; used for example as 'View Readme.txt'
254RunEntryShellExec=檢視 %1
255
256; *** "Setup Needs the Next Disk"
257ChangeDiskTitle=安裝程式需要下一張磁片
258SelectDiskLabel2=請插入磁片 %1,然後按 「確定」。%n%n如果檔案不在以下所顯示的資料夾之中,請輸入正確的資料夾名稱或按 [瀏覽] 選取。
259PathLabel=路徑(&P):
260FileNotInDir2=檔案“%1”無法在“%2”找到。請插入正確的磁片或選擇其它的資料夾。
261SelectDirectoryLabel=請指定下一張磁片的位置。
262
263; *** Installation phase messages
264SetupAborted=安裝沒有完成。%n%n請更正問題後重新安裝一次。
265AbortRetryIgnoreSelectAction=選取動作
266AbortRetryIgnoreRetry=請再試一次 (&T)
267AbortRetryIgnoreIgnore=略過錯誤並繼續 (&I)
268AbortRetryIgnoreCancel=取消安裝
269
270; *** Installation status messages
271StatusClosingApplications=正在關閉應用程式...
272StatusCreateDirs=正在建立資料夾...
273StatusExtractFiles=正在解壓縮檔案...
274StatusCreateIcons=正在建立程式集圖示...
275StatusCreateIniEntries=寫入 INI 檔案的項目...
276StatusCreateRegistryEntries=正在更新系統登錄...
277StatusRegisterFiles=正在登錄檔案...
278StatusSavingUninstall=儲存解除安裝資訊...
279StatusRunProgram=正在完成安裝...
280StatusRestartingApplications=正在重新開啟應用程式...
281StatusRollback=正在復原變更...
282
283; *** Misc. errors
284ErrorInternal2=內部錯誤: %1
285ErrorFunctionFailedNoCode=%1 失敗
286ErrorFunctionFailed=%1 失敗;代碼 %2
287ErrorFunctionFailedWithMessage=%1 失敗;代碼 %2.%n%3
288ErrorExecutingProgram=無法執行檔案:%n%1
289
290; *** Registry errors
291ErrorRegOpenKey=無法開啟登錄鍵:%n%1\%2
292ErrorRegCreateKey=無法建立登錄項目:%n%1\%2
293ErrorRegWriteKey=無法變更登錄項目:%n%1\%2
294
295; *** INI errors
296ErrorIniEntry=在檔案“%1”建立 INI 項目錯誤。
297
298; *** File copying errors
299FileAbortRetryIgnoreSkipNotRecommended=略過這個檔案 (不建議) (&S)
300FileAbortRetryIgnoreIgnoreNotRecommended=略過錯誤並繼續 (不建議) (&I)
301SourceDoesntExist=來源檔案“%1”不存在。
302SourceIsCorrupted=來源檔案已經損毀。
303ExistingFileReadOnly2=無法取代現有檔案,因為檔案已標示為唯讀。
304ExistingFileReadOnlyRetry=移除唯讀屬性並重試 (&R)
305ExistingFileReadOnlyKeepExisting=保留現有檔案 (&K)
306ErrorReadingExistingDest=讀取一個已存在的檔案時發生錯誤:
307FileExistsSelectAction=選擇操作
308FileExists2=檔案已存在。
309FileExistsOverwriteExisting=覆寫現有檔案
310FileExistsKeepExisting=保留現有檔案 (&O)
311FileExistsOverwriteOrKeepAll=對下次衝突執行相同操作 (&D)
312ExistingFileNewerSelectAction=選擇操作
313ExistingFileNewer2=現有檔案比安裝程式嘗試安裝的檔案還新。
314ExistingFileNewerOverwriteExisting=覆寫現有檔案 (&O)
315ExistingFileNewerKeepExisting=保留現有檔案 (&K) (建議選項)
316ExistingFileNewerOverwriteOrKeepAll=對下次衝突執行相同操作 (&D)
317ErrorChangingAttr=在變更檔案屬性時發生錯誤:
318ErrorCreatingTemp=在目的資料夾中建立檔案時發生錯誤:
319ErrorReadingSource=讀取原始檔案時發生錯誤:
320ErrorCopying=複製檔案時發生錯誤:
321ErrorReplacingExistingFile=取代檔案時發生錯誤:
322ErrorRestartReplace=重新啟動電腦後取代檔案失敗:
323ErrorRenamingTemp=在目的資料夾變更檔案名稱時發生錯誤:
324ErrorRegisterServer=無法注冊 DLL/OCX 檔案: %1。
325ErrorRegSvr32Failed=RegSvr32 失敗;退出代碼 %1
326ErrorRegisterTypeLib=無法注冊類型庫: %1。
327
328; *** Uninstall display name markings
329; used for example as 'My Program (32-bit)'
330UninstallDisplayNameMark=%1 (%2)
331; used for example as 'My Program (32-bit, All users)'
332UninstallDisplayNameMarks=%1 (%2, %3)
333UninstallDisplayNameMark32Bit=32 位元
334UninstallDisplayNameMark64Bit=64 位元
335UninstallDisplayNameMarkAllUsers=所有使用者
336UninstallDisplayNameMarkCurrentUser=目前使用者
337
338; *** Post-installation errors
339ErrorOpeningReadme=開啟讀我檔案時發生錯誤。
340ErrorRestartingComputer=安裝程式無法重新啟動電腦,請自行重新啟動。
341
342; *** Uninstaller messages
343UninstallNotFound=檔案“%1”不存在,無法解除安裝。
344UninstallOpenError=無法開啟檔案“%1”,無法解除安裝
345UninstallUnsupportedVer=這個版本的解除安裝程式無法辨識記錄檔 “%1” 之格式,無法解除安裝。
346UninstallUnknownEntry=解除安裝記錄檔中發現未知的記錄 (%1)。
347ConfirmUninstall=您確定要完全移除 %1 及其相關的檔案嗎?
348UninstallOnlyOnWin64=這個程式只能在 64 位元的 Windows 上解除安裝。
349OnlyAdminCanUninstall=這個程式要具備系統管理員權限的使用者方可解除安裝。
350UninstallStatusLabel=正在從您的電腦移除 %1 中,請稍候...
351UninstalledAll=%1 已經成功從您的電腦中移除。
352UninstalledMost=%1 解除安裝完成。%n%n某些檔案及元件無法移除,您可以自行刪除這些檔案。
353UninstalledAndNeedsRestart=要完成 %1 的解除安裝程序,您必須重新啟動電腦。%n%n您想要現在重新啟動電腦嗎?
354UninstallDataCorrupted=檔案“%1”已經損毀,無法解除安裝
355
356; *** Uninstallation phase messages
357ConfirmDeleteSharedFileTitle=移除共用檔案
358ConfirmDeleteSharedFile2=系統顯示下列共用檔案已不再被任何程式所使用,您要移除這些檔案嗎?%n%n%1%n%n倘若您移除了以上檔案但仍有程式需要使用它們,將造成這些程式無法正常執行,因此您若無法確定請選擇 [否]。保留這些檔案在您的系統中不會造成任何損害。
359SharedFileNameLabel=檔案名稱:
360SharedFileLocationLabel=位置:
361WizardUninstalling=解除安裝狀態
362StatusUninstalling=正在解除安裝 %1...
363
364; *** Shutdown block reasons
365ShutdownBlockReasonInstallingApp=正在安裝 %1。
366ShutdownBlockReasonUninstallingApp=正在解除安裝 %1。
367
368; The custom messages below aren't used by Setup itself, but if you make
369; use of them in your scripts, you'll want to translate them.
370
371[CustomMessages]
372
373NameAndVersion=%1 版本 %2
374AdditionalIcons=附加圖示:
375CreateDesktopIcon=建立桌面圖示(&D)
376CreateQuickLaunchIcon=建立快速啟動圖示(&Q)
377ProgramOnTheWeb=%1 的網站
378UninstallProgram=解除安裝 %1
379LaunchProgram=啟動 %1
380AssocFileExtension=將 %1 與檔案副檔名 %2 產生關聯(&A)
381AssocingFileExtension=正在將 %1 與檔案副檔名 %2 產生關聯...
382AutoStartProgramGroupDescription=開啟:
383AutoStartProgram=自動開啟 %1
384AddonHostProgramNotFound=%1 無法在您所選的資料夾中找到。%n%n您是否還要繼續?
Note: See TracBrowser for help on using the repository browser.